// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IUniswapV2Factory {
    event PairCreated(
        address indexed token0,
        address indexed token1,
        address pair,
        uint
    );

    function feeTo() external view returns (address);

    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB)
        external
        view
        returns (address pair);

    function allPairs(uint) external view returns (address pair);

    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB)
        external
        returns (address pair);

    function setFeeTo(address) external;

    function setFeeToSetter(address) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IUniswapV2Pair {
    event Approval(
        address indexed owner,
        address indexed spender,
        uint value
    );
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);

    function symbol() external pure returns (string memory);

    function decimals() external pure returns (uint8);

    function totalSupply() external view returns (uint);

    function balanceOf(address owner) external view returns (uint);

    function allowance(address owner, address spender)
        external
        view
        returns (uint);

    function approve(address spender, uint value) external returns (bool);

    function transfer(address to, uint value) external returns (bool);

    function transferFrom(
        address from,
        address to,
        uint value
    ) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);

    function PERMIT_TYPEHASH() external pure returns (bytes32);

    function nonces(address owner) external view returns (uint);

    function permit(
        address owner,
        address spender,
        uint value,
        uint deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(
        address indexed sender,
        uint amount0,
        uint amount1,
        address indexed to
    );
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);

    function factory() external view returns (address);

    function token0() external view returns (address);

    function token1() external view returns (address);

    function getReserves()
        external
        view
        returns (
            uint112 reserve0,
            uint112 reserve1,
            uint32 blockTimestampLast
        );

    function price0CumulativeLast() external view returns (uint);

    function price1CumulativeLast() external view returns (uint);

    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);

    function burn(address to)
        external
        returns (uint amount0, uint amount1);

    function swap(
        uint amount0Out,
        uint amount1Out,
        address to,
        bytes calldata data
    ) external;

    function skim(address to) external;

    function sync() external;

    function initialize(address, address) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IUniswapV2Router02 {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    )
        external
        returns (
            uint amountA,
            uint amountB,
            uint liquidity
        );

    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    )
        external
        payable
        returns (
            uint amountToken,
            uint amountETH,
            uint liquidity
        );

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/*
    PANDEMONIUM
    $CHAOS

    Website: https://pandemonium.wtf
    Twitter: https://twitter.com/Chaotic_DeFi
    Telegram: https://t.me/chaoticdefi
 */

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";

import "./interfaces/IUniswapV2Factory.sol";
import "./interfaces/IUniswapV2Router02.sol";
import "./interfaces/IUniswapV2Pair.sol";

contract PandemoniumToken is IERC20, Ownable {
    using SafeMath for uint;

    uint private constant internalDecimals = 10**24;
    uint private constant BASE = 10**18;
    uint public scalingFactor;
    uint public initSupply;

    IUniswapV2Router02 public immutable uniswapV2Router;
    IUniswapV2Pair public immutable uniswapV2Pair;
    address public immutable WETH;
    
    uint private constant REBASE_PERIOD = 1 hours; // 1 hour between rebases
    uint public maxRebasePercentage = 50;

    address public vault;
    uint public currentEpoch;
    uint public lastEpochTimestamp;
    
    uint private constant INIT_SUPPLY = 1_000_000 * 10**18;
    uint public constant maxWallet = INIT_SUPPLY / 100;

    uint private _totalSupply;
    mapping (address => uint) internal _supplyBalances;
    mapping (address => mapping(address => uint)) internal _allowedFragments;

    // Anti-bot and anti-whale mappings and variables
    mapping(address => uint) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
    mapping(address => bool) private _isExcluded;
    bool public limitsEnabled = true;

    string private _name = "Pandemonium";
    string private _symbol = "CHAOS";
    uint8 private _decimals = uint8(18);

    /**
     * @notice Event emitted when tokens are rebased
     */
    event Rebase(
        uint epoch,
        uint prefix,
        uint percentage,
        uint prevScalingFactor,
        uint newScalingFactor
    );

    event Mint(address to, uint amount);
    event Burn(address from, uint amount);

    modifier validRecipient(address to) {
        require(to != address(0x0));
        require(to != address(this));
        _;
    }

    modifier onlyVault() {
        require(msg.sender == vault);
        _;
    }

    constructor()
    {
        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
        WETH = address(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);

        address pair = IUniswapV2Factory(_uniswapV2Router.factory())
            .createPair(address(this), WETH);
            
        uniswapV2Router = _uniswapV2Router;
        uniswapV2Pair = IUniswapV2Pair(pair);

        lastEpochTimestamp = 1687467600;

        scalingFactor = BASE;
        initSupply = _fragmentsToSupply(INIT_SUPPLY);
        _totalSupply = INIT_SUPPLY;
        _supplyBalances[owner()] = initSupply;
        
        emit Transfer(address(0x0), msg.sender, INIT_SUPPLY);
    }

        /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @return The total number of fragments.
     */
    function totalSupply()
        external
        view
        returns (uint)
    {
        return _totalSupply;
    }

    /**
     * @param who The address to query.
     * @return The balance of the specified address.
     */
    function balanceOf(address who) public view returns (uint) {
        return _supplyToFragments(_supplyBalances[who]);
    }

    function mint(address to, uint amount) external onlyVault returns (bool) {
        _mint(to, amount);
        return true;
    }

    function _mint(address to, uint amount) internal {
        _totalSupply = _totalSupply.add(amount);
        uint supplyValue = _fragmentsToSupply(amount);

        initSupply = initSupply.add(supplyValue);

        require(
            scalingFactor <= _maxScalingFactor(),
            "max scaling factor too low"
        );

        _supplyBalances[to] = _supplyBalances[to].add(supplyValue);

        emit Mint(to, amount);
        emit Transfer(address(0), to, amount);
    }

    function burn(uint amount) external onlyVault returns (bool) {
        _burn(amount);
        return true;
    }

    function _burn(uint amount) internal {
        _totalSupply = _totalSupply.sub(amount);
        uint supplyValue = _fragmentsToSupply(amount);

        initSupply = initSupply.sub(supplyValue);
        _supplyBalances[msg.sender] = _supplyBalances[msg.sender].sub(supplyValue);

        emit Burn(msg.sender, amount);
        emit Transfer(msg.sender, address(0), amount);
    }

    /**
     * @dev Transfer tokens to a specified address.
     * @param to The address to transfer to.
     * @param value The amount to be transferred.
     * @return True on success, false otherwise.
     */
    function transfer(address to, uint value)
        external
        validRecipient(to)
        returns (bool)
    {
        if (limitsEnabled) {
            if (
                to != owner() &&
                to != address(0x0) && 
                to != address(0xdead) &&
                to != address(uniswapV2Router) &&
                to != address(uniswapV2Pair) &&
                !(_isExcluded[msg.sender] || _isExcluded[to])
            ) {
                require(
                    _holderLastTransferTimestamp[msg.sender] <
                        block.number,
                    "transfer:: Transfer Delay enabled. Only one purchase per block allowed."
                );
                _holderLastTransferTimestamp[msg.sender] = block.number;

                require(
                    value + balanceOf(to) <= maxWallet,
                    "transfer:: Max wallet exceeded"
                );
            }
        }

        uint supplyValue = _fragmentsToSupply(value);
        _supplyBalances[msg.sender] = _supplyBalances[msg.sender].sub(supplyValue);
        _supplyBalances[to] = _supplyBalances[to].add(supplyValue);

        emit Transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * @param from The address you want to send tokens from.
     * @param to The address you want to transfer to.
     * @param value The amount of tokens to be transferred.
     */
    function transferFrom(address from, address to, uint value)
        external
        validRecipient(to)
        returns (bool)
    {
        if (limitsEnabled) { 
            if (
                to != owner() &&
                to != address(0x0) && 
                to != address(0xdead) &&
                to != address(uniswapV2Router) &&
                to != address(uniswapV2Pair) &&
                !(_isExcluded[from] || _isExcluded[to])
            ) {
                require(
                    _holderLastTransferTimestamp[msg.sender] <
                        block.number,
                    "transfer:: Transfer Delay enabled. Only one purchase per block allowed."
                );
                _holderLastTransferTimestamp[msg.sender] = block.number;

                require(
                    value + balanceOf(to) <= maxWallet,
                    "transfer:: Max wallet exceeded"
                );
            }
        }

        _allowedFragments[from][msg.sender] = _allowedFragments[from][
            msg.sender
        ].sub(value);

        uint supplyValue = _fragmentsToSupply(value);
        _supplyBalances[from] = _supplyBalances[from].sub(supplyValue);
        _supplyBalances[to] = _supplyBalances[to].add(supplyValue);

        emit Transfer(from, to, value);
        return true;
    }

    /**
     * @dev Function to check the amount of tokens that an owner has allowed to a spender.
     * @param owner_ The address which owns the funds.
     * @param spender The address which will spend the funds.
     * @return The number of tokens still available for the spender.
     */
    function allowance(address owner_, address spender)
        external
        view
        returns (uint)
    {
        return _allowedFragments[owner_][spender];
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of
     * msg.sender. This method is included for ERC20 compatibility.
     * increaseAllowance and decreaseAllowance should be used instead.
     * Changing an allowance with this method brings the risk that someone may transfer both
     * the old and the new allowance - if they are both greater than zero - if a transfer
     * transaction is mined before the later approve() call is mined.
     *
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint value)
        external
        returns (bool)
    {
        _allowedFragments[msg.sender][spender] = value;
        emit Approval(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner has allowed to a spender.
     * This method should be used instead of approve() to avoid the double approval vulnerability
     * described above.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint addedValue)
        external
        returns (bool)
    {
        _allowedFragments[msg.sender][spender] = _allowedFragments[msg.sender][
            spender
        ].add(addedValue);
        emit Approval(
            msg.sender,
            spender,
            _allowedFragments[msg.sender][spender]
        );
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner has allowed to a spender.
     *
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint subtractedValue)
        external
        returns (bool)
    {
        uint oldValue = _allowedFragments[msg.sender][spender];
        if (subtractedValue >= oldValue) {
            _allowedFragments[msg.sender][spender] = 0;
        } else {
            _allowedFragments[msg.sender][spender] = oldValue.sub(
                subtractedValue
            );
        }
        emit Approval(
            msg.sender,
            spender,
            _allowedFragments[msg.sender][spender]
        );
        return true;
    }

    /**
     * @dev Notifies Fragments contract about a new rebase cycle.
     * @return The total number of fragments after the supply adjustment.
     */
    function rebase()
        external
        returns (uint)
    {
        require(lastEpochTimestamp.add(REBASE_PERIOD) < block.timestamp,
            "rebase:: Too soon to trigger next rebase!");

        uint nonce = random();
        uint prefix = nonce % 2;
        uint percentage = nonce % maxRebasePercentage;
        if (percentage == 0) percentage = maxRebasePercentage;

        currentEpoch++;
        lastEpochTimestamp = block.timestamp;
        uint prevScalingFactor = scalingFactor;

        if (prefix == 1) {
            // positive rebase
            uint newScalingFactor = scalingFactor
                .mul(BASE.add(BASE.mul(percentage).div(100)))
                .div(BASE);

            if (newScalingFactor < _maxScalingFactor()) {
                scalingFactor = newScalingFactor;
            } else {
                scalingFactor = _maxScalingFactor();
            }
        } else {
            // negative rebase
            scalingFactor = scalingFactor
                .mul(BASE.sub(BASE.mul(percentage).div(100)))
                .div(BASE);
        }

        _totalSupply = _supplyToFragments(initSupply);
        uniswapV2Pair.sync();

        emit Rebase(
            currentEpoch, 
            prefix,
            percentage,
            prevScalingFactor, 
            scalingFactor
        );
        return _totalSupply;
    }

    function canRebase() external view returns (bool) {
        return lastEpochTimestamp.add(REBASE_PERIOD) < block.timestamp;
    }

    function toggleLimits() external onlyOwner returns (bool) {
        limitsEnabled = !limitsEnabled;
        return true;
    }

    // for token airdrop
    function excludeAddress(address _address) external onlyOwner {
        _isExcluded[_address] = true;
    }

    function setVault(address _vault) external onlyOwner {
        vault = _vault;
    }

    function setMaxRebase(uint percentage) external onlyOwner {
        require (percentage <= 50,
            "Max rebase percentage must be lte than 50");

        maxRebasePercentage = percentage;
    }

    function random() internal view returns (uint) {
        return uint(
            keccak256(
                abi.encodePacked(
                    block.timestamp, 
                    block.difficulty,
                    currentEpoch, 
                    scalingFactor
                )
            )
        );
    }

    /** VIEWS */

    function maxScalingFactor() external view returns (uint) {
        return _maxScalingFactor();
    }

    function _maxScalingFactor() internal view returns (uint) {
        return uint(int256(-1)) / initSupply;
    }

    function _fragmentsToSupply(uint amount) internal view returns (uint) {
        return amount.mul(internalDecimals).div(scalingFactor);
    }

    function _supplyToFragments(uint amount) internal view returns (uint) {
        return amount.mul(scalingFactor).div(internalDecimals);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

{
  "compilationTarget": {
    "contracts/PandemoniumToken.sol": "PandemoniumToken"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}