// Sources flattened with hardhat v2.18.3 https://hardhat.org

// SPDX-License-Identifier: MIT

pragma experimental ABIEncoderV2;

// File contracts/interfaces/IMintableERC20.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity >=0.5.17 <0.9.0;

interface IMintableERC20 {
  function mint(address account, uint256 amount) external returns (bool);

  function transfer(address recipient, uint256 amount) external returns (bool);

  function totalSupply() external view returns (uint256);

  function balanceOf(address account) external view returns (uint256);

  function approve(address spender, uint256 amount) external returns (bool);

  function decimals() external view returns (uint8);
}


// File contracts/interfaces/IPublicLock.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity >=0.5.17 <0.9.0;
// Original pragma directive: pragma experimental ABIEncoderV2

/**
 * @title The PublicLock Interface
 */

interface IPublicLock {
  /// Functions
  function initialize(
    address _lockCreator,
    uint _expirationDuration,
    address _tokenAddress,
    uint _keyPrice,
    uint _maxNumberOfKeys,
    string calldata _lockName
  ) external;

  // default role from OpenZeppelin
  function DEFAULT_ADMIN_ROLE() external view returns (bytes32 role);

  /**
   * @notice The version number of the current implementation on this network.
   * @return The current version number.
   */
  function publicLockVersion() external pure returns (uint16);

  /**
   * @dev Called by lock manager to withdraw all funds from the lock
   * @param _tokenAddress specifies the token address to withdraw or 0 for ETH. This is usually
   * the same as `tokenAddress` in MixinFunds.
   * @param _recipient specifies the address that will receive the tokens
   * @param _amount specifies the max amount to withdraw, which may be reduced when
   * considering the available balance. Set to 0 or MAX_UINT to withdraw everything.
   * -- however be wary of draining funds as it breaks the `cancelAndRefund` and `expireAndRefundFor` use cases.
   */
  function withdraw(
    address _tokenAddress,
    address payable _recipient,
    uint _amount
  ) external;

  /**
   * A function which lets a Lock manager of the lock to change the price for future purchases.
   * @dev Throws if called by other than a Lock manager
   * @dev Throws if lock has been disabled
   * @dev Throws if _tokenAddress is not a valid token
   * @param _keyPrice The new price to set for keys
   * @param _tokenAddress The address of the erc20 token to use for pricing the keys,
   * or 0 to use ETH
   */
  function updateKeyPricing(uint _keyPrice, address _tokenAddress) external;

  /**
   * Update the main key properties for the entire lock:
   *
   * - default duration of each key
   * - the maximum number of keys the lock can edit
   * - the maximum number of keys a single address can hold
   *
   * @notice keys previously bought are unaffected by this changes in expiration duration (i.e.
   * existing keys timestamps are not recalculated/updated)
   * @param _newExpirationDuration the new amount of time for each key purchased or type(uint).max for a non-expiring key
   * @param _maxKeysPerAcccount the maximum amount of key a single user can own
   * @param _maxNumberOfKeys uint the maximum number of keys
   * @dev _maxNumberOfKeys Can't be smaller than the existing supply
   */
  function updateLockConfig(
    uint _newExpirationDuration,
    uint _maxNumberOfKeys,
    uint _maxKeysPerAcccount
  ) external;

  /**
   * Checks if the user has a non-expired key.
   * @param _user The address of the key owner
   */
  function getHasValidKey(address _user) external view returns (bool);

  /**
   * @dev Returns the key's ExpirationTimestamp field for a given owner.
   * @param _tokenId the id of the key
   * @dev Returns 0 if the owner has never owned a key for this lock
   */
  function keyExpirationTimestampFor(
    uint _tokenId
  ) external view returns (uint timestamp);

  /**
   * Public function which returns the total number of unique owners (both expired
   * and valid).  This may be larger than totalSupply.
   */
  function numberOfOwners() external view returns (uint);

  /**
   * Allows the Lock owner to assign
   * @param _lockName a descriptive name for this Lock.
   * @param _lockSymbol a Symbol for this Lock (default to KEY).
   * @param _baseTokenURI the baseTokenURI for this Lock
   */
  function setLockMetadata(
    string calldata _lockName,
    string calldata _lockSymbol,
    string calldata _baseTokenURI
  ) external;

  /**
   * @dev Gets the token symbol
   * @return string representing the token symbol
   */
  function symbol() external view returns (string memory);

  /**  @notice A distinct Uniform Resource Identifier (URI) for a given asset.
   * @dev Throws if `_tokenId` is not a valid NFT. URIs are defined in RFC
   *  3986. The URI may point to a JSON file that conforms to the "ERC721
   *  Metadata JSON Schema".
   * https://github.com/ethereum/EIPs/blob/master/EIPS/eip-721.md
   * @param _tokenId The tokenID we're inquiring about
   * @return String representing the URI for the requested token
   */
  function tokenURI(uint256 _tokenId) external view returns (string memory);

  /**
   * Allows a Lock manager to add or remove an event hook
   * @param _onKeyPurchaseHook Hook called when the `purchase` function is called
   * @param _onKeyCancelHook Hook called when the internal `_cancelAndRefund` function is called
   * @param _onValidKeyHook Hook called to determine if the contract should overide the status for a given address
   * @param _onTokenURIHook Hook called to generate a data URI used for NFT metadata
   * @param _onKeyTransferHook Hook called when a key is transfered
   * @param _onKeyExtendHook Hook called when a key is extended or renewed
   * @param _onKeyGrantHook Hook called when a key is granted
   */
  function setEventHooks(
    address _onKeyPurchaseHook,
    address _onKeyCancelHook,
    address _onValidKeyHook,
    address _onTokenURIHook,
    address _onKeyTransferHook,
    address _onKeyExtendHook,
    address _onKeyGrantHook
  ) external;

  /**
   * Allows a Lock manager to give a collection of users a key with no charge.
   * Each key may be assigned a different expiration date.
   * @dev Throws if called by other than a Lock manager
   * @param _recipients An array of receiving addresses
   * @param _expirationTimestamps An array of expiration Timestamps for the keys being granted
   * @return the ids of the granted tokens
   */
  function grantKeys(
    address[] calldata _recipients,
    uint[] calldata _expirationTimestamps,
    address[] calldata _keyManagers
  ) external returns (uint256[] memory);

  /**
   * Allows the Lock owner to extend an existing keys with no charge.
   * @param _tokenId The id of the token to extend
   * @param _duration The duration in secondes to add ot the key
   * @dev set `_duration` to 0 to use the default duration of the lock
   */
  function grantKeyExtension(uint _tokenId, uint _duration) external;

  /**
   * @dev Purchase function
   * @param _values array of tokens amount to pay for this purchase >= the current keyPrice - any applicable discount
   * (_values is ignored when using ETH)
   * @param _recipients array of addresses of the recipients of the purchased key
   * @param _referrers array of addresses of the users making the referral
   * @param _keyManagers optional array of addresses to grant managing rights to a specific address on creation
   * @param _data array of arbitrary data populated by the front-end which initiated the sale
   * @notice when called for an existing and non-expired key, the `_keyManager` param will be ignored
   * @dev Setting _value to keyPrice exactly doubles as a security feature. That way if the lock owner increases the
   * price while my transaction is pending I can't be charged more than I expected (only applicable to ERC-20 when more
   * than keyPrice is approved for spending).
   * @return tokenIds the ids of the created tokens
   */
  function purchase(
    uint256[] calldata _values,
    address[] calldata _recipients,
    address[] calldata _referrers,
    address[] calldata _keyManagers,
    bytes[] calldata _data
  ) external payable returns (uint256[] memory tokenIds);

  /**
   * @dev Extend function
   * @param _value the number of tokens to pay for this purchase >= the current keyPrice - any applicable discount
   * (_value is ignored when using ETH)
   * @param _tokenId the id of the key to extend
   * @param _referrer address of the user making the referral
   * @param _data arbitrary data populated by the front-end which initiated the sale
   * @dev Throws if lock is disabled or key does not exist for _recipient. Throws if _recipient == address(0).
   */
  function extend(
    uint _value,
    uint _tokenId,
    address _referrer,
    bytes calldata _data
  ) external payable;

  /**
   * Returns the percentage of the keyPrice to be sent to the referrer (in basis points)
   * @param _referrer the address of the referrer
   * @return referrerFee the percentage of the keyPrice to be sent to the referrer (in basis points)
   */
  function referrerFees(
    address _referrer
  ) external view returns (uint referrerFee);

  /**
   * Set a specific percentage of the keyPrice to be sent to the referrer while purchasing,
   * extending or renewing a key.
   * @param _referrer the address of the referrer
   * @param _feeBasisPoint the percentage of the price to be used for this
   * specific referrer (in basis points)
   * @dev To send a fixed percentage of the key price to all referrers, sett a percentage to `address(0)`
   */
  function setReferrerFee(address _referrer, uint _feeBasisPoint) external;

  /**
   * Merge existing keys
   * @param _tokenIdFrom the id of the token to substract time from
   * @param _tokenIdTo the id of the destination token  to add time
   * @param _amount the amount of time to transfer (in seconds)
   */
  function mergeKeys(uint _tokenIdFrom, uint _tokenIdTo, uint _amount) external;

  /**
   * Deactivate an existing key
   * @param _tokenId the id of token to burn
   * @notice the key will be expired and ownership records will be destroyed
   */
  function burn(uint _tokenId) external;

  /**
   * @param _gasRefundValue price in wei or token in smallest price unit
   * @dev Set the value to be refunded to the sender on purchase
   */
  function setGasRefundValue(uint256 _gasRefundValue) external;

  /**
   * _gasRefundValue price in wei or token in smallest price unit
   * @dev Returns the value/price to be refunded to the sender on purchase
   */
  function gasRefundValue() external view returns (uint256 _gasRefundValue);

  /**
   * @notice returns the minimum price paid for a purchase with these params.
   * @dev this considers any discount from Unlock or the OnKeyPurchase hook.
   */
  function purchasePriceFor(
    address _recipient,
    address _referrer,
    bytes calldata _data
  ) external view returns (uint);

  /**
   * Allow a Lock manager to change the transfer fee.
   * @dev Throws if called by other than a Lock manager
   * @param _transferFeeBasisPoints The new transfer fee in basis-points(bps).
   * Ex: 200 bps = 2%
   */
  function updateTransferFee(uint _transferFeeBasisPoints) external;

  /**
   * Determines how much of a fee would need to be paid in order to
   * transfer to another account.  This is pro-rated so the fee goes
   * down overtime.
   * @dev Throws if _tokenId does not have a valid key
   * @param _tokenId The id of the key check the transfer fee for.
   * @param _time The amount of time to calculate the fee for.
   * @return The transfer fee in seconds.
   */
  function getTransferFee(
    uint _tokenId,
    uint _time
  ) external view returns (uint);

  /**
   * @dev Invoked by a Lock manager to expire the user's key
   * and perform a refund and cancellation of the key
   * @param _tokenId The key id we wish to refund to
   * @param _amount The amount to refund to the key-owner
   * @dev Throws if called by other than a Lock manager
   * @dev Throws if _keyOwner does not have a valid key
   */
  function expireAndRefundFor(uint _tokenId, uint _amount) external;

  /**
   * @dev allows the key manager to expire a given tokenId
   * and send a refund to the keyOwner based on the amount of time remaining.
   * @param _tokenId The id of the key to cancel.
   * @notice cancel is enabled with a 10% penalty by default on all Locks.
   */
  function cancelAndRefund(uint _tokenId) external;

  /**
   * Allow a Lock manager to change the refund penalty.
   * @dev Throws if called by other than a Lock manager
   * @param _freeTrialLength The new duration of free trials for this lock
   * @param _refundPenaltyBasisPoints The new refund penaly in basis-points(bps)
   */
  function updateRefundPenalty(
    uint _freeTrialLength,
    uint _refundPenaltyBasisPoints
  ) external;

  /**
   * @dev Determines how much of a refund a key owner would receive if they issued
   * @param _tokenId the id of the token to get the refund value for.
   * @notice Due to the time required to mine a tx, the actual refund amount will be lower
   * than what the user reads from this call.
   * @return refund the amount of tokens refunded
   */
  function getCancelAndRefundValue(
    uint _tokenId
  ) external view returns (uint refund);

  function addLockManager(address account) external;

  function isLockManager(address account) external view returns (bool);

  /**
   * Returns the address of the `onKeyPurchaseHook` hook.
   * @return hookAddress address of the hook
   */
  function onKeyPurchaseHook() external view returns (address hookAddress);

  /**
   * Returns the address of the `onKeyCancelHook` hook.
   * @return hookAddress address of the hook
   */
  function onKeyCancelHook() external view returns (address hookAddress);

  /**
   * Returns the address of the `onValidKeyHook` hook.
   * @return hookAddress address of the hook
   */
  function onValidKeyHook() external view returns (address hookAddress);

  /**
   * Returns the address of the `onTokenURIHook` hook.
   * @return hookAddress address of the hook
   */
  function onTokenURIHook() external view returns (address hookAddress);

  /**
   * Returns the address of the `onKeyTransferHook` hook.
   * @return hookAddress address of the hook
   */
  function onKeyTransferHook() external view returns (address hookAddress);

  /**
   * Returns the address of the `onKeyExtendHook` hook.
   * @return hookAddress the address ok the hook
   */
  function onKeyExtendHook() external view returns (address hookAddress);

  /**
   * Returns the address of the `onKeyGrantHook` hook.
   * @return hookAddress the address ok the hook
   */
  function onKeyGrantHook() external view returns (address hookAddress);

  function renounceLockManager() external;

  /**
   * @return the maximum number of key allowed for a single address
   */
  function maxKeysPerAddress() external view returns (uint);

  function expirationDuration() external view returns (uint256);

  function freeTrialLength() external view returns (uint256);

  function keyPrice() external view returns (uint256);

  function maxNumberOfKeys() external view returns (uint256);

  function refundPenaltyBasisPoints() external view returns (uint256);

  function tokenAddress() external view returns (address);

  function transferFeeBasisPoints() external view returns (uint256);

  function unlockProtocol() external view returns (address);

  function keyManagerOf(uint) external view returns (address);

  ///===================================================================

  /**
   * @notice Allows the key owner to safely share their key (parent key) by
   * transferring a portion of the remaining time to a new key (child key).
   * @dev Throws if key is not valid.
   * @dev Throws if `_to` is the zero address
   * @param _to The recipient of the shared key
   * @param _tokenId the key to share
   * @param _timeShared The amount of time shared
   * checks if `_to` is a smart contract (code size > 0). If so, it calls
   * `onERC721Received` on `_to` and throws if the return value is not
   * `bytes4(keccak256('onERC721Received(address,address,uint,bytes)'))`.
   * @dev Emit Transfer event
   */
  function shareKey(address _to, uint _tokenId, uint _timeShared) external;

  /**
   * @notice Update transfer and cancel rights for a given key
   * @param _tokenId The id of the key to assign rights for
   * @param _keyManager The address to assign the rights to for the given key
   */
  function setKeyManagerOf(uint _tokenId, address _keyManager) external;

  /**
   * Check if a certain key is valid
   * @param _tokenId the id of the key to check validity
   * @notice this makes use of the onValidKeyHook if it is set
   */
  function isValidKey(uint _tokenId) external view returns (bool);

  /**
   * Returns the number of keys owned by `_keyOwner` (expired or not)
   * @param _keyOwner address for which we are retrieving the total number of keys
   * @return numberOfKeys total number of keys owned by the address
   */
  function totalKeys(
    address _keyOwner
  ) external view returns (uint numberOfKeys);

  /// @notice A descriptive name for a collection of NFTs in this contract
  function name() external view returns (string memory _name);

  ///===================================================================

  /// From ERC165.sol
  function supportsInterface(bytes4 interfaceId) external view returns (bool);

  ///===================================================================

  /// From ERC-721
  /**
   * In the specific case of a Lock, `balanceOf` returns only the tokens with a valid expiration timerange
   * @return balance The number of valid keys owned by `_keyOwner`
   */
  function balanceOf(address _owner) external view returns (uint256 balance);

  /**
   * @dev Returns the owner of the NFT specified by `tokenId`.
   */
  function ownerOf(uint256 tokenId) external view returns (address _owner);

  /**
   * @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
   * another (`to`).
   *
   * Requirements:
   * - `from`, `to` cannot be zero.
   * - `tokenId` must be owned by `from`.
   * - If the caller is not `from`, it must be have been allowed to move this
   * NFT by either `approve` or `setApprovalForAll`.
   */
  function safeTransferFrom(address from, address to, uint256 tokenId) external;

  /**
   * an ERC721-like function to transfer a token from one account to another.
   * @param from the owner of token to transfer
   * @param to the address that will receive the token
   * @param tokenId the id of the token
   * @dev Requirements: if the caller is not `from`, it must be approved to move this token by
   * either `approve` or `setApprovalForAll`.
   * The key manager will be reset to address zero after the transfer
   */
  function transferFrom(address from, address to, uint256 tokenId) external;

  /**
   * Lending a key allows you to transfer the token while retaining the
   * ownerships right by setting yourself as a key manager first.
   * @param from the owner of token to transfer
   * @param to the address that will receive the token
   * @param tokenId the id of the token
   * @notice This function can only be called by 1) the key owner when no key manager is set or 2) the key manager.
   * After calling the function, the `_recipent` will be the new owner, and the sender of the tx
   * will become the key manager.
   */
  function lendKey(address from, address to, uint tokenId) external;

  /**
   * Unlend is called when you have lent a key and want to claim its full ownership back.
   * @param _recipient the address that will receive the token ownership
   * @param _tokenId the id of the token
   * @dev Only the key manager of the token can call this function
   */
  function unlendKey(address _recipient, uint _tokenId) external;

  function approve(address to, uint256 tokenId) external;

  /**
   * @notice Get the approved address for a single NFT
   * @dev Throws if `_tokenId` is not a valid NFT.
   * @param _tokenId The NFT to find the approved address for
   * @return operator The approved address for this NFT, or the zero address if there is none
   */
  function getApproved(
    uint256 _tokenId
  ) external view returns (address operator);

  /**
   * @dev Sets or unsets the approval of a given operator
   * An operator is allowed to transfer all tokens of the sender on their behalf
   * @param _operator operator address to set the approval
   * @param _approved representing the status of the approval to be set
   * @notice disabled when transfers are disabled
   */
  function setApprovalForAll(address _operator, bool _approved) external;

  /**
   * @dev Tells whether an operator is approved by a given keyManager
   * @param _owner owner address which you want to query the approval of
   * @param _operator operator address which you want to query the approval of
   * @return bool whether the given operator is approved by the given owner
   */
  function isApprovedForAll(
    address _owner,
    address _operator
  ) external view returns (bool);

  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId,
    bytes calldata data
  ) external;

  /**
   * Returns the total number of keys, including non-valid ones
   * @return _totalKeysCreated the total number of keys, valid or not
   */
  function totalSupply() external view returns (uint256 _totalKeysCreated);

  function tokenOfOwnerByIndex(
    address _owner,
    uint256 index
  ) external view returns (uint256 tokenId);

  function tokenByIndex(uint256 index) external view returns (uint256);

  /**
   * Innherited from Open Zeppelin AccessControl.sol
   */
  function getRoleAdmin(bytes32 role) external view returns (bytes32);

  function grantRole(bytes32 role, address account) external;

  function revokeRole(bytes32 role, address account) external;

  function renounceRole(bytes32 role, address account) external;

  function hasRole(bytes32 role, address account) external view returns (bool);

  /** `owner()` is provided as an helper to mimick the `Ownable` contract ABI.
   * The `Ownable` logic is used by many 3rd party services to determine
   * contract ownership - e.g. who is allowed to edit metadata on Opensea.
   *
   * @notice This logic is NOT used internally by the Unlock Protocol and is made
   * available only as a convenience helper.
   */
  function owner() external view returns (address owner);

  function setOwner(address account) external;

  function isOwner(address account) external view returns (bool isOwner);

  /**
   * Migrate data from the previous single owner => key mapping to
   * the new data structure w multiple tokens.
   * @param _calldata an ABI-encoded representation of the params (v10: the number of records to migrate as `uint`)
   * @dev when all record schemas are sucessfully upgraded, this function will update the `schemaVersion`
   * variable to the latest/current lock version
   */
  function migrate(bytes calldata _calldata) external;

  /**
   * Returns the version number of the data schema currently used by the lock
   * @notice if this is different from `publicLockVersion`, then the ability to purchase, grant
   * or extend keys is disabled.
   * @dev will return 0 if no ;igration has ever been run
   */
  function schemaVersion() external view returns (uint);

  /**
   * Set the schema version to the latest
   * @notice only lock manager call call this
   */
  function updateSchemaVersion() external;

  /**
   * Renew a given token
   * @notice only works for non-free, expiring, ERC20 locks
   * @param _tokenId the ID fo the token to renew
   * @param _referrer the address of the person to be granted UDT
   */
  function renewMembershipFor(uint _tokenId, address _referrer) external;

  /**
   * Set the expiration of a key
   * @notice only a lock manager can call this function
   * @param _tokenId the id of the key
   * @param _newExpiration the new timestamp to use
   */
  function setKeyExpiration(uint _tokenId, uint _newExpiration) external;

  /**
   * @dev helper to check if a key is currently renewable
   * it will revert if the pricing or duration of the lock have been modified
   * unfavorably since the key was bought(price increase or duration decrease).
   * It will also revert if a lock is not renewable or if the key is not ready for renewal yet
   * (at least 90% expired).
   * @param tokenId the id of the token to check
   * @param referrer the address where to send the referrer fee
   * @return true if the terms has changed
   */
  function isRenewable(
    uint256 tokenId,
    address referrer
  ) external view returns (bool);
}


// File contracts/interfaces/ISwapBurner.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity >=0.7.0 <0.9.0;

interface ISwapBurner {
  function swapAndBurn(
    address tokenAddress,
    uint24 poolFee
  ) external payable returns (uint amount);
}


// File contracts/interfaces/IUniswapOracleV3.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity >=0.5.0;

interface IUniswapOracleV3 {
  function PERIOD() external returns (uint256);

  function factory() external returns (address);

  function update(address _tokenIn, address _tokenOut) external;

  function consult(
    address _tokenIn,
    uint256 _amountIn,
    address _tokenOut
  ) external view returns (uint256 _amountOut);

  function updateAndConsult(
    address _tokenIn,
    uint256 _amountIn,
    address _tokenOut
  ) external returns (uint256 _amountOut);
}


// File contracts/interfaces/IUnlock.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity >=0.5.17 <0.9.0;

/**
 * @title The Unlock Interface
 **/

interface IUnlock {
  // Use initialize instead of a constructor to support proxies(for upgradeability via zos).
  function initialize(address _unlockOwner) external;

  /**
   * @dev deploy a ProxyAdmin contract used to upgrade locks
   */
  function initializeProxyAdmin() external;

  /**
   * Retrieve the contract address of the proxy admin that manages the locks
   * @return _proxyAdminAddress the address of the ProxyAdmin instance
   */
  function proxyAdminAddress()
    external
    view
    returns (address _proxyAdminAddress);

  /**
   * @notice Create lock (legacy)
   * This deploys a lock for a creator. It also keeps track of the deployed lock.
   * @param _expirationDuration the duration of the lock (pass 0 for unlimited duration)
   * @param _tokenAddress set to the ERC20 token address, or 0 for ETH.
   * @param _keyPrice the price of each key
   * @param _maxNumberOfKeys the maximum nimbers of keys to be edited
   * @param _lockName the name of the lock
   * param _salt [deprec] -- kept only for backwards copatibility
   * This may be implemented as a sequence ID or with RNG. It's used with `create2`
   * to know the lock's address before the transaction is mined.
   * @dev internally call `createUpgradeableLock`
   */
  function createLock(
    uint _expirationDuration,
    address _tokenAddress,
    uint _keyPrice,
    uint _maxNumberOfKeys,
    string calldata _lockName,
    bytes12 // _salt
  ) external returns (address);

  /**
   * @notice Create lock (default)
   * This deploys a lock for a creator. It also keeps track of the deployed lock.
   * @param data bytes containing the call to initialize the lock template
   * @dev this call is passed as encoded function - for instance:
   *  bytes memory data = abi.encodeWithSignature(
   *    'initialize(address,uint256,address,uint256,uint256,string)',
   *    msg.sender,
   *    _expirationDuration,
   *    _tokenAddress,
   *    _keyPrice,
   *    _maxNumberOfKeys,
   *    _lockName
   *  );
   * @return address of the create lock
   */
  function createUpgradeableLock(bytes memory data) external returns (address);

  /**
   * Create an upgradeable lock using a specific PublicLock version
   * @param data bytes containing the call to initialize the lock template
   * (refer to createUpgradeableLock for more details)
   * @param _lockVersion the version of the lock to use
   */
  function createUpgradeableLockAtVersion(
    bytes memory data,
    uint16 _lockVersion
  ) external returns (address);

  /**
   * @notice Upgrade a lock to a specific version
   * @dev only available for publicLockVersion > 10 (proxyAdmin /required)
   * @param lockAddress the existing lock address
   * @param version the version number you are targeting
   * Likely implemented with OpenZeppelin TransparentProxy contract
   */
  function upgradeLock(
    address payable lockAddress,
    uint16 version
  ) external returns (address);

  /**
   * This function keeps track of the added GDP, as well as grants of discount tokens
   * to the referrer, if applicable.
   * The number of discount tokens granted is based on the value of the referal,
   * the current growth rate and the lock's discount token distribution rate
   * This function is invoked by a previously deployed lock only.
   */
  function recordKeyPurchase(
    uint _value,
    address _referrer // solhint-disable-line no-unused-vars
  ) external;

  /**
   * @notice [DEPRECATED] Call to this function has been removed from PublicLock > v9.
   * @dev [DEPRECATED] Kept for backwards compatibility
   * This function will keep track of consumed discounts by a given user.
   * It will also grant discount tokens to the creator who is granting the discount based on the
   * amount of discount and compensation rate.
   * This function is invoked by a previously deployed lock only.
   */
  function recordConsumedDiscount(
    uint _discount,
    uint _tokens // solhint-disable-line no-unused-vars
  ) external view;

  /**
   * @notice [DEPRECATED] Call to this function has been removed from PublicLock > v9.
   * @dev [DEPRECATED] Kept for backwards compatibility
   * This function returns the discount available for a user, when purchasing a
   * a key from a lock.
   * This does not modify the state. It returns both the discount and the number of tokens
   * consumed to grant that discount.
   */
  function computeAvailableDiscountFor(
    address _purchaser, // solhint-disable-line no-unused-vars
    uint _keyPrice // solhint-disable-line no-unused-vars
  ) external pure returns (uint discount, uint tokens);

  // Function to read the globalTokenURI field.
  function globalBaseTokenURI() external view returns (string memory);

  /**
   * @dev Redundant with globalBaseTokenURI() for backwards compatibility with v3 & v4 locks.
   */
  function getGlobalBaseTokenURI() external view returns (string memory);

  // Function to read the globalTokenSymbol field.
  function globalTokenSymbol() external view returns (string memory);

  // Function to read the chainId field.
  function chainId() external view returns (uint);

  /**
   * @dev Redundant with globalTokenSymbol() for backwards compatibility with v3 & v4 locks.
   */
  function getGlobalTokenSymbol() external view returns (string memory);

  /**
   * @notice Allows the owner to update configuration variables
   */
  function configUnlock(
    address _udt,
    address _weth,
    uint _estimatedGasForPurchase,
    string calldata _symbol,
    string calldata _URI,
    uint _chainId
  ) external;

  /**
   * @notice Add a PublicLock template to be used for future calls to `createLock`.
   * @dev This is used to upgrade conytract per version number
   */
  function addLockTemplate(address impl, uint16 version) external;

  /**
   * Match lock templates addresses with version numbers
   * @param _version the number of the version of the template
   * @return _implAddress address of the lock templates
   */
  function publicLockImpls(
    uint16 _version
  ) external view returns (address _implAddress);

  /**
   * Match version numbers with lock templates addresses
   * @param _impl the address of the deployed template contract (PublicLock)
   * @return number of the version corresponding to this address
   */
  function publicLockVersions(address _impl) external view returns (uint16);

  /**
   * Retrive the latest existing lock template version
   * @return _version the version number of the latest template (used to deploy contracts)
   */
  function publicLockLatestVersion() external view returns (uint16 _version);

  /**
   * @notice Upgrade the PublicLock template used for future calls to `createLock`.
   * @dev This will initialize the template and revokeOwnership.
   */
  function setLockTemplate(address payable _publicLockAddress) external;

  // Allows the owner to change the value tracking variables as needed.
  function resetTrackedValue(
    uint _grossNetworkProduct,
    uint _totalDiscountGranted
  ) external;

  function grossNetworkProduct() external view returns (uint);

  function totalDiscountGranted() external view returns (uint);

  function locks(
    address
  )
    external
    view
    returns (bool deployed, uint totalSales, uint yieldedDiscountTokens);

  // The address of the public lock template, used when `createLock` is called
  function publicLockAddress() external view returns (address);

  // Map token address to exchange contract address if the token is supported
  // Used for GDP calculations
  function uniswapOracles(address) external view returns (address);

  // The WETH token address, used for value calculations
  function weth() external view returns (address);

  // The UDT token address, used to mint tokens on referral
  function udt() external view returns (address);

  // The approx amount of gas required to purchase a key
  function estimatedGasForPurchase() external view returns (uint);

  /**
   * Helper to get the network mining basefee as introduced in EIP-1559
   * @dev this helper can be wrapped in try/catch statement to avoid
   * revert in networks where EIP-1559 is not implemented
   */
  function networkBaseFee() external view returns (uint);

  // The version number of the current Unlock implementation on this network
  function unlockVersion() external pure returns (uint16);

  /**
   * @notice allows the owner to set the oracle address to use for value conversions
   * setting the _oracleAddress to address(0) removes support for the token
   * @dev This will also call update to ensure at least one datapoint has been recorded.
   */
  function setOracle(address _tokenAddress, address _oracleAddress) external;

  // Initialize the Ownable contract, granting contract ownership to the specified sender
  function __initializeOwnable(address sender) external;

  /**
   * @dev Returns true if the caller is the current owner.
   */
  function isOwner() external view returns (bool);

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() external view returns (address);

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions anymore. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby removing any functionality that is only available to the owner.
   */
  function renounceOwnership() external;

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) external;

  /**
   * Set the fee collected by the protocol
   * @param _protocolFee fee (in basis points)
   */
  function setProtocolFee(uint _protocolFee) external;

  /**
   * The fee (in basis points) collected by the protocol on each purchase / 
   extension / renewal of a key
   * @return the protocol fee in basic point
   */
  function protocolFee() external view returns (uint);

  /**
   * Returns the ProxyAdmin contract address that manage upgrades for
   * the current Unlock contract.
   * @dev this reads the address directly from storage, at the slot `_ADMIN_SLOT`
   * defined by Open Zeppelin's EIP1967 Proxy implementation which corresponds
   * to the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1
   */
  function getAdmin() external view returns (address);

  /**
   * Call executed by a lock after its version upgrade triggred by `upgradeLock`
   * - PublicLock v12 > v13 (mainnet): migrate an existing Lock to another instance
   * of the Unlock contract
   * @dev The `msg.sender` will be the upgraded lock
   */
  function postLockUpgrade() external;

  /**
   * Functions which transfers tokens held by the contract
   * It handles both ERC20 and the base currency.
   * @dev This function is onlyOwner
   * @param token the address of the token to transfer (pass the 0x0 address for the base currency)
   * @param to the address to transfer the tokens to
   * @param amount the amount of tokens to transfer
   */
  function transferTokens(address token, address to, uint256 amount) external;

  /**
   * Removes a lock from the list of locks. This will prevent the lock from being able to receive governance tokens.
   * The lock will still be able to sell its memberships.
   * @dev This function is onlyOwner
   * @param lock address of the lock to remove
   */
  function removeLock(address lock) external;

  /**
   * Send tokens held by this contract to the UDT SwapBurner contract. The tokens sent to the
   * contract are then swapped for UDT and UDT itself will be sent to a burner address.
   * @notice This function can be called by anyone (not only the contract owner) as a way to ensure decentralization.
   * @param token the address of the token (zero address for native) to swap and burn
   * @param amount the amount of tokens to swap and burn
   * @param poolFee the poolFee of the token <> WETH/Wrapped Native asset to  use for the swap
   */
  function swapAndBurn(address token, uint256 amount, uint24 poolFee) external;

  /**
   * Set the UDT Swap and Burn contract address
   * @param _swapBurnerAddress the address of the SwapBurner contract instance
   */
  function setSwapBurner(address _swapBurnerAddress) external;

  /**
   * The address of the UDT Swap and Burn contract
   */
  function swapBurnerAddress() external view returns (address);
}


// File @openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol@v4.9.5

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}


// File contracts/utils/UnlockInitializable.sol

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/utils/Initializable.sol)

pragma solidity ^0.8.0;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
 * initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() initializer {}
 * ```
 * ====
 */
abstract contract UnlockInitializable {
  /**
   * @dev Indicates that the contract has been initialized.
   */
  bool private initialized;

  /**
   * @dev Indicates that the contract is in the process of being initialized.
   */
  bool private initializing;

  /**
   * @dev Modifier to protect an initializer function from being invoked twice.
   */
  modifier initializer() {
    // If the contract is initializing we ignore whether initialized is set in order to support multiple
    // inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
    // contract may have been reentered.
    require(
      initializing ? _isConstructor() : !initialized,
      "ALREADY_INITIALIZED"
    );

    bool isTopLevelCall = !initializing;
    if (isTopLevelCall) {
      initializing = true;
      initialized = true;
    }

    _;

    if (isTopLevelCall) {
      initializing = false;
    }
  }

  /**
   * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
   * {initializer} modifier, directly or indirectly.
   */
  modifier onlyInitializing() {
    require(initializing, "NOT_INITIALIZING");
    _;
  }

  function _isConstructor() private view returns (bool) {
    return !AddressUpgradeable.isContract(address(this));
  }
}


// File contracts/utils/UnlockContextUpgradeable.sol

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract UnlockContextUpgradeable is UnlockInitializable {
  function __Context_init() internal onlyInitializing {
    __Context_init_unchained();
  }

  function __Context_init_unchained() internal onlyInitializing {}

  function _msgSender() internal view virtual returns (address) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes calldata) {
    return msg.data;
  }

  uint256[50] private ______gap;
}


// File contracts/utils/UnlockOwnable.sol

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.3.2 (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be aplied to your functions to restrict their use to
 * the owner.
 *
 * This contract was originally part of openzeppelin/contracts-ethereum-package
 * but had to be included (instead of using the one in openzeppelin/contracts-upgradeable )
 * because the ______gap array length was 49 instead of 50
 */
abstract contract UnlockOwnable is
  UnlockInitializable,
  UnlockContextUpgradeable
{
  address private _owner;

  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );

  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
   */
  function __initializeOwnable(address sender) public initializer {
    _owner = sender;
    emit OwnershipTransferred(address(0), _owner);
  }

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(isOwner(), "ONLY_OWNER");
    _;
  }

  /**
   * @dev Returns true if the caller is the current owner.
   */
  function isOwner() public view returns (bool) {
    return _msgSender() == _owner;
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions anymore. Can only be called by the current owner.
   *
   * > Note: Renouncing ownership will leave the contract without an owner,
   * thereby removing any functionality that is only available to the owner.
   */
  function renounceOwnership() public onlyOwner {
    _transferOwnership(address(0));
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public onlyOwner {
    require(newOwner != address(0), "INVALID_OWNER");
    _transferOwnership(newOwner);
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   */
  function _transferOwnership(address newOwner) internal {
    address oldOwner = _owner;
    _owner = newOwner;
    emit OwnershipTransferred(oldOwner, newOwner);
  }

  uint256[50] private ______gap;
}


// File contracts/utils/UnlockProxyAdmin.sol

/* solhint-disable no-inline-assembly */
// Sources flattened with hardhat v2.18.3 https://hardhat.org

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.21;

// File @openzeppelin/contracts/utils/Context.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes calldata) {
    return msg.data;
  }
}

// File @openzeppelin/contracts/access/Ownable.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
  address private _owner;

  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );

  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
   */
  constructor() {
    _transferOwnership(_msgSender());
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    _checkOwner();
    _;
  }

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view virtual returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if the sender is not the owner.
   */
  function _checkOwner() internal view virtual {
    require(owner() == _msgSender(), "Ownable: caller is not the owner");
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby disabling any functionality that is only available to the owner.
   */
  function renounceOwnership() public virtual onlyOwner {
    _transferOwnership(address(0));
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    require(newOwner != address(0), "Ownable: new owner is the zero address");
    _transferOwnership(newOwner);
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Internal function without access restriction.
   */
  function _transferOwnership(address newOwner) internal virtual {
    address oldOwner = _owner;
    _owner = newOwner;
    emit OwnershipTransferred(oldOwner, newOwner);
  }
}

// File @openzeppelin/contracts/interfaces/draft-IERC1822.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)

/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
  /**
   * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
   * address.
   *
   * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
   * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
   * function revert if invoked through a proxy.
   */
  function proxiableUUID() external view returns (bytes32);
}

// File @openzeppelin/contracts/interfaces/IERC1967.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC1967.sol)

/**
 * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.
 *
 * _Available since v4.8.3._
 */
interface IERC1967 {
  /**
   * @dev Emitted when the implementation is upgraded.
   */
  event Upgraded(address indexed implementation);

  /**
   * @dev Emitted when the admin account has changed.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Emitted when the beacon is changed.
   */
  event BeaconUpgraded(address indexed beacon);
}

// File @openzeppelin/contracts/proxy/beacon/IBeacon.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
  /**
   * @dev Must return an address that can be used as a delegate call target.
   *
   * {BeaconProxy} will check that this address is a contract.
   */
  function implementation() external view returns (address);
}

// File @openzeppelin/contracts/utils/Address.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   *
   * Furthermore, `isContract` will also return true if the target contract within
   * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
   * which only has an effect at the end of a transaction.
   * ====
   *
   * [IMPORTANT]
   * ====
   * You shouldn't rely on `isContract` to protect against flash loan attacks!
   *
   * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
   * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
   * constructor.
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize/address.code.length, which returns 0
    // for contracts in construction, since the code is only stored at the end
    // of the constructor execution.

    return account.code.length > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, "Address: insufficient balance");

    (bool success, ) = recipient.call{value: amount}("");
    require(
      success,
      "Address: unable to send value, recipient may have reverted"
    );
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data
  ) internal returns (bytes memory) {
    return
      functionCallWithValue(target, data, 0, "Address: low-level call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value
  ) internal returns (bytes memory) {
    return
      functionCallWithValue(
        target,
        data,
        value,
        "Address: low-level call with value failed"
      );
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(
      address(this).balance >= value,
      "Address: insufficient balance for call"
    );
    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return
      verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data
  ) internal view returns (bytes memory) {
    return
      functionStaticCall(target, data, "Address: low-level static call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    (bool success, bytes memory returndata) = target.staticcall(data);
    return
      verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data
  ) internal returns (bytes memory) {
    return
      functionDelegateCall(
        target,
        data,
        "Address: low-level delegate call failed"
      );
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return
      verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
   * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
   *
   * _Available since v4.8._
   */
  function verifyCallResultFromTarget(
    address target,
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    if (success) {
      if (returndata.length == 0) {
        // only check isContract if the call was successful and the return data is empty
        // otherwise we already know that it was a contract
        require(isContract(target), "Address: call to non-contract");
      }
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  /**
   * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason or using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  function _revert(
    bytes memory returndata,
    string memory errorMessage
  ) private pure {
    // Look for revert reason and bubble it up if present
    if (returndata.length > 0) {
      // The easiest way to bubble the revert reason is using memory via assembly
      /// @solidity memory-safe-assembly
      assembly {
        let returndata_size := mload(returndata)
        revert(add(32, returndata), returndata_size)
      }
    } else {
      revert(errorMessage);
    }
  }
}

// File @openzeppelin/contracts/utils/StorageSlot.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._
 * _Available since v4.9 for `string`, `bytes`._
 */
library StorageSlot {
  struct AddressSlot {
    address value;
  }

  struct BooleanSlot {
    bool value;
  }

  struct Bytes32Slot {
    bytes32 value;
  }

  struct Uint256Slot {
    uint256 value;
  }

  struct StringSlot {
    string value;
  }

  struct BytesSlot {
    bytes value;
  }

  /**
   * @dev Returns an `AddressSlot` with member `value` located at `slot`.
   */
  function getAddressSlot(
    bytes32 slot
  ) internal pure returns (AddressSlot storage r) {
    /// @solidity memory-safe-assembly
    assembly {
      r.slot := slot
    }
  }

  /**
   * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
   */
  function getBooleanSlot(
    bytes32 slot
  ) internal pure returns (BooleanSlot storage r) {
    /// @solidity memory-safe-assembly
    assembly {
      r.slot := slot
    }
  }

  /**
   * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
   */
  function getBytes32Slot(
    bytes32 slot
  ) internal pure returns (Bytes32Slot storage r) {
    /// @solidity memory-safe-assembly
    assembly {
      r.slot := slot
    }
  }

  /**
   * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
   */
  function getUint256Slot(
    bytes32 slot
  ) internal pure returns (Uint256Slot storage r) {
    /// @solidity memory-safe-assembly
    assembly {
      r.slot := slot
    }
  }

  /**
   * @dev Returns an `StringSlot` with member `value` located at `slot`.
   */
  function getStringSlot(
    bytes32 slot
  ) internal pure returns (StringSlot storage r) {
    /// @solidity memory-safe-assembly
    assembly {
      r.slot := slot
    }
  }

  /**
   * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
   */
  function getStringSlot(
    string storage store
  ) internal pure returns (StringSlot storage r) {
    /// @solidity memory-safe-assembly
    assembly {
      r.slot := store.slot
    }
  }

  /**
   * @dev Returns an `BytesSlot` with member `value` located at `slot`.
   */
  function getBytesSlot(
    bytes32 slot
  ) internal pure returns (BytesSlot storage r) {
    /// @solidity memory-safe-assembly
    assembly {
      r.slot := slot
    }
  }

  /**
   * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
   */
  function getBytesSlot(
    bytes storage store
  ) internal pure returns (BytesSlot storage r) {
    /// @solidity memory-safe-assembly
    assembly {
      r.slot := store.slot
    }
  }
}

// File @openzeppelin/contracts/proxy/ERC1967/ERC1967Upgrade.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/ERC1967/ERC1967Upgrade.sol)

/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 */
abstract contract ERC1967Upgrade is IERC1967 {
  // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
  bytes32 private constant _ROLLBACK_SLOT =
    0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant _IMPLEMENTATION_SLOT =
    0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

  /**
   * @dev Returns the current implementation address.
   */
  function _getImplementation() internal view returns (address) {
    return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
  }

  /**
   * @dev Stores a new address in the EIP1967 implementation slot.
   */
  function _setImplementation(address newImplementation) private {
    require(
      Address.isContract(newImplementation),
      "ERC1967: new implementation is not a contract"
    );
    StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
  }

  /**
   * @dev Perform implementation upgrade
   *
   * Emits an {Upgraded} event.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Perform implementation upgrade with additional setup call.
   *
   * Emits an {Upgraded} event.
   */
  function _upgradeToAndCall(
    address newImplementation,
    bytes memory data,
    bool forceCall
  ) internal {
    _upgradeTo(newImplementation);
    if (data.length > 0 || forceCall) {
      Address.functionDelegateCall(newImplementation, data);
    }
  }

  /**
   * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
   *
   * Emits an {Upgraded} event.
   */
  function _upgradeToAndCallUUPS(
    address newImplementation,
    bytes memory data,
    bool forceCall
  ) internal {
    // Upgrades from old implementations will perform a rollback test. This test requires the new
    // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
    // this special case will break upgrade paths from old UUPS implementation to new ones.
    if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
      _setImplementation(newImplementation);
    } else {
      try IERC1822Proxiable(newImplementation).proxiableUUID() returns (
        bytes32 slot
      ) {
        require(
          slot == _IMPLEMENTATION_SLOT,
          "ERC1967Upgrade: unsupported proxiableUUID"
        );
      } catch {
        revert("ERC1967Upgrade: new implementation is not UUPS");
      }
      _upgradeToAndCall(newImplementation, data, forceCall);
    }
  }

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
   * validated in the constructor.
   */
  bytes32 internal constant _ADMIN_SLOT =
    0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

  /**
   * @dev Returns the current admin.
   */
  function _getAdmin() internal view returns (address) {
    return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
  }

  /**
   * @dev Stores a new address in the EIP1967 admin slot.
   */
  function _setAdmin(address newAdmin) private {
    require(newAdmin != address(0), "ERC1967: new admin is the zero address");
    StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
  }

  /**
   * @dev Changes the admin of the proxy.
   *
   * Emits an {AdminChanged} event.
   */
  function _changeAdmin(address newAdmin) internal {
    emit AdminChanged(_getAdmin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
   * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
   */
  bytes32 internal constant _BEACON_SLOT =
    0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

  /**
   * @dev Returns the current beacon.
   */
  function _getBeacon() internal view returns (address) {
    return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
  }

  /**
   * @dev Stores a new beacon in the EIP1967 beacon slot.
   */
  function _setBeacon(address newBeacon) private {
    require(
      Address.isContract(newBeacon),
      "ERC1967: new beacon is not a contract"
    );
    require(
      Address.isContract(IBeacon(newBeacon).implementation()),
      "ERC1967: beacon implementation is not a contract"
    );
    StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
  }

  /**
   * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
   * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
   *
   * Emits a {BeaconUpgraded} event.
   */
  function _upgradeBeaconToAndCall(
    address newBeacon,
    bytes memory data,
    bool forceCall
  ) internal {
    _setBeacon(newBeacon);
    emit BeaconUpgraded(newBeacon);
    if (data.length > 0 || forceCall) {
      Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
    }
  }
}

// File @openzeppelin/contracts/proxy/Proxy.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
  /**
   * @dev Delegates the current call to `implementation`.
   *
   * This function does not return to its internal call site, it will return directly to the external caller.
   */
  function _delegate(address implementation) internal virtual {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize())

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize())

      switch result
      // delegatecall returns 0 on error.
      case 0 {
        revert(0, returndatasize())
      }
      default {
        return(0, returndatasize())
      }
    }
  }

  /**
   * @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
   * and {_fallback} should delegate.
   */
  function _implementation() internal view virtual returns (address);

  /**
   * @dev Delegates the current call to the address returned by `_implementation()`.
   *
   * This function does not return to its internal call site, it will return directly to the external caller.
   */
  function _fallback() internal virtual {
    _beforeFallback();
    _delegate(_implementation());
  }

  /**
   * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
   * function in the contract matches the call data.
   */
  fallback() external payable virtual {
    _fallback();
  }

  /**
   * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
   * is empty.
   */
  receive() external payable virtual {
    _fallback();
  }

  /**
   * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
   * call, or as part of the Solidity `fallback` or `receive` functions.
   *
   * If overridden should call `super._beforeFallback()`.
   */
  function _beforeFallback() internal virtual {}
}

// File @openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/ERC1967/ERC1967Proxy.sol)

/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
  /**
   * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
   *
   * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
   * function call, and allows initializing the storage of the proxy like a Solidity constructor.
   */
  constructor(address _logic, bytes memory _data) payable {
    _upgradeToAndCall(_logic, _data, false);
  }

  /**
   * @dev Returns the current implementation address.
   */
  function _implementation()
    internal
    view
    virtual
    override
    returns (address impl)
  {
    return ERC1967Upgrade._getImplementation();
  }
}

// File @openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/transparent/TransparentUpgradeableProxy.sol)

/**
 * @dev Interface for {TransparentUpgradeableProxy}. In order to implement transparency, {TransparentUpgradeableProxy}
 * does not implement this interface directly, and some of its functions are implemented by an internal dispatch
 * mechanism. The compiler is unaware that these functions are implemented by {TransparentUpgradeableProxy} and will not
 * include them in the ABI so this interface must be used to interact with it.
 */
interface ITransparentUpgradeableProxy is IERC1967 {
  function admin() external view returns (address);

  function implementation() external view returns (address);

  function changeAdmin(address) external;

  function upgradeTo(address) external;

  function upgradeToAndCall(address, bytes memory) external payable;
}

/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 *
 * NOTE: The real interface of this proxy is that defined in `ITransparentUpgradeableProxy`. This contract does not
 * inherit from that interface, and instead the admin functions are implicitly implemented using a custom dispatch
 * mechanism in `_fallback`. Consequently, the compiler will not produce an ABI for this contract. This is necessary to
 * fully implement transparency without decoding reverts caused by selector clashes between the proxy and the
 * implementation.
 *
 * WARNING: It is not recommended to extend this contract to add additional external functions. If you do so, the compiler
 * will not check that there are no selector conflicts, due to the note above. A selector clash between any new function
 * and the functions declared in {ITransparentUpgradeableProxy} will be resolved in favor of the new one. This could
 * render the admin operations inaccessible, which could prevent upgradeability. Transparency may also be compromised.
 */
contract TransparentUpgradeableProxy is ERC1967Proxy {
  /**
   * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
   * optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
   */
  constructor(
    address _logic,
    address admin_,
    bytes memory _data
  ) payable ERC1967Proxy(_logic, _data) {
    _changeAdmin(admin_);
  }

  /**
   * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
   *
   * CAUTION: This modifier is deprecated, as it could cause issues if the modified function has arguments, and the
   * implementation provides a function with the same selector.
   */
  modifier ifAdmin() {
    if (msg.sender == _getAdmin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * @dev If caller is the admin process the call internally, otherwise transparently fallback to the proxy behavior
   */
  function _fallback() internal virtual override {
    if (msg.sender == _getAdmin()) {
      bytes memory ret;
      bytes4 selector = msg.sig;
      if (selector == ITransparentUpgradeableProxy.upgradeTo.selector) {
        ret = _dispatchUpgradeTo();
      } else if (
        selector == ITransparentUpgradeableProxy.upgradeToAndCall.selector
      ) {
        ret = _dispatchUpgradeToAndCall();
      } else if (
        selector == ITransparentUpgradeableProxy.changeAdmin.selector
      ) {
        ret = _dispatchChangeAdmin();
      } else if (selector == ITransparentUpgradeableProxy.admin.selector) {
        ret = _dispatchAdmin();
      } else if (
        selector == ITransparentUpgradeableProxy.implementation.selector
      ) {
        ret = _dispatchImplementation();
      } else {
        revert(
          "TransparentUpgradeableProxy: admin cannot fallback to proxy target"
        );
      }
      assembly {
        return(add(ret, 0x20), mload(ret))
      }
    } else {
      super._fallback();
    }
  }

  /**
   * @dev Returns the current admin.
   *
   * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
   * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
   * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
   */
  function _dispatchAdmin() private returns (bytes memory) {
    _requireZeroValue();

    address admin = _getAdmin();
    return abi.encode(admin);
  }

  /**
   * @dev Returns the current implementation.
   *
   * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
   * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
   * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
   */
  function _dispatchImplementation() private returns (bytes memory) {
    _requireZeroValue();

    address implementation = _implementation();
    return abi.encode(implementation);
  }

  /**
   * @dev Changes the admin of the proxy.
   *
   * Emits an {AdminChanged} event.
   */
  function _dispatchChangeAdmin() private returns (bytes memory) {
    _requireZeroValue();

    address newAdmin = abi.decode(msg.data[4:], (address));
    _changeAdmin(newAdmin);

    return "";
  }

  /**
   * @dev Upgrade the implementation of the proxy.
   */
  function _dispatchUpgradeTo() private returns (bytes memory) {
    _requireZeroValue();

    address newImplementation = abi.decode(msg.data[4:], (address));
    _upgradeToAndCall(newImplementation, bytes(""), false);

    return "";
  }

  /**
   * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
   * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
   * proxied contract.
   */
  function _dispatchUpgradeToAndCall() private returns (bytes memory) {
    (address newImplementation, bytes memory data) = abi.decode(
      msg.data[4:],
      (address, bytes)
    );
    _upgradeToAndCall(newImplementation, data, true);

    return "";
  }

  /**
   * @dev Returns the current admin.
   *
   * CAUTION: This function is deprecated. Use {ERC1967Upgrade-_getAdmin} instead.
   */
  function _admin() internal view virtual returns (address) {
    return _getAdmin();
  }

  /**
   * @dev To keep this contract fully transparent, all `ifAdmin` functions must be payable. This helper is here to
   * emulate some proxy functions being non-payable while still allowing value to pass through.
   */
  function _requireZeroValue() private {
    require(msg.value == 0);
  }
}

// File @openzeppelin/contracts/proxy/transparent/ProxyAdmin.sol@v4.9.3

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.3) (proxy/transparent/ProxyAdmin.sol)

/**
 * @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
 * explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
 */
contract ProxyAdmin is Ownable {
  /**
   * @dev Returns the current implementation of `proxy`.
   *
   * Requirements:
   *
   * - This contract must be the admin of `proxy`.
   */
  function getProxyImplementation(
    ITransparentUpgradeableProxy proxy
  ) public view virtual returns (address) {
    // We need to manually run the static call since the getter cannot be flagged as view
    // bytes4(keccak256("implementation()")) == 0x5c60da1b
    (bool success, bytes memory returndata) = address(proxy).staticcall(
      hex"5c60da1b"
    );
    require(success);
    return abi.decode(returndata, (address));
  }

  /**
   * @dev Returns the current admin of `proxy`.
   *
   * Requirements:
   *
   * - This contract must be the admin of `proxy`.
   */
  function getProxyAdmin(
    ITransparentUpgradeableProxy proxy
  ) public view virtual returns (address) {
    // We need to manually run the static call since the getter cannot be flagged as view
    // bytes4(keccak256("admin()")) == 0xf851a440
    (bool success, bytes memory returndata) = address(proxy).staticcall(
      hex"f851a440"
    );
    require(success);
    return abi.decode(returndata, (address));
  }

  /**
   * @dev Changes the admin of `proxy` to `newAdmin`.
   *
   * Requirements:
   *
   * - This contract must be the current admin of `proxy`.
   */
  function changeProxyAdmin(
    ITransparentUpgradeableProxy proxy,
    address newAdmin
  ) public virtual onlyOwner {
    proxy.changeAdmin(newAdmin);
  }

  /**
   * @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
   *
   * Requirements:
   *
   * - This contract must be the admin of `proxy`.
   */
  function upgrade(
    ITransparentUpgradeableProxy proxy,
    address implementation
  ) public virtual onlyOwner {
    proxy.upgradeTo(implementation);
  }

  /**
   * @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
   * {TransparentUpgradeableProxy-upgradeToAndCall}.
   *
   * Requirements:
   *
   * - This contract must be the admin of `proxy`.
   */
  function upgradeAndCall(
    ITransparentUpgradeableProxy proxy,
    address implementation,
    bytes memory data
  ) public payable virtual onlyOwner {
    proxy.upgradeToAndCall{value: msg.value}(implementation, data);
  }
}


// File contracts/Unlock.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity 0.8.21;

/**
 * @title The Unlock contract
 * @author Julien Genestoux (unlock-protocol.com)
 * This smart contract has 3 main roles:
 *  1. Distribute discounts to discount token holders
 *  2. Grant dicount tokens to users making referrals and/or publishers granting discounts.
 *  3. Create & deploy Public Lock contracts.
 * In order to achieve these 3 elements, it keeps track of several things such as
 *  a. Deployed locks addresses and balances of discount tokens granted by each lock.
 *  b. The total network product (sum of all key sales, net of discounts)
 *  c. Total of discounts granted
 *  d. Balances of discount tokens, including 'frozen' tokens (which have been used to claim
 * discounts and cannot be used/transferred for a given period)
 *  e. Growth rate of Network Product
 *  f. Growth rate of Discount tokens supply
 * The smart contract has an owner who only can perform the following
 *  - Upgrades
 *  - Change in golden rules (20% of GDP available in discounts, and supply growth rate is at most
 * 50% of GNP growth rate)
 * NOTE: This smart contract is partially implemented for now until enough Locks are deployed and
 * in the wild.
 * The partial implementation includes the following features:
 *  a. Keeping track of deployed locks
 *  b. Keeping track of GNP
 */








/// @dev Must list the direct base contracts in the order from “most base-like” to “most derived”.
/// https://solidity.readthedocs.io/en/latest/contracts.html#multiple-inheritance-and-linearization
contract Unlock is UnlockInitializable, UnlockOwnable {
  /**
   * The struct for a lock
   * We use deployed to keep track of deployments.
   * This is required because both totalSales and yieldedDiscountTokens are 0 when initialized,
   * which would be the same values when the lock is not set.
   */
  struct LockBalances {
    bool deployed;
    uint totalSales; // This is in wei
    uint yieldedDiscountTokens;
  }

  modifier onlyFromDeployedLock() {
    require(locks[msg.sender].deployed, "ONLY_LOCKS");
    _;
  }

  uint public grossNetworkProduct;

  uint public totalDiscountGranted;

  // We keep track of deployed locks to ensure that callers are all deployed locks.
  mapping(address => LockBalances) public locks;

  // global base token URI
  // Used by locks where the owner has not set a custom base URI.
  string public globalBaseTokenURI;

  // global base token symbol
  // Used by locks where the owner has not set a custom symbol
  string public globalTokenSymbol;

  // The address of the latest public lock template, used by default when `createLock` is called
  address public publicLockAddress;

  // Map token address to oracle contract address if the token is supported
  // Used for GDP calculations
  mapping(address => IUniswapOracleV3) public uniswapOracles;

  // The WETH token address, used for value calculations
  address public weth;

  // The UDT token address, used to mint tokens on referral
  address public udt;

  // The approx amount of gas required to purchase a key
  uint public estimatedGasForPurchase;

  // Blockchain ID the network id on which this version of Unlock is operating
  uint public chainId;

  // store proxy admin
  address public proxyAdminAddress;
  ProxyAdmin private proxyAdmin;

  // publicLock templates
  mapping(address => uint16) private _publicLockVersions;
  mapping(uint16 => address) private _publicLockImpls;
  uint16 public publicLockLatestVersion;

  // protocol fee
  uint public protocolFee;

  // UDT SwapBurner contract address
  address public swapBurnerAddress;

  // errors
  error Unlock__MANAGER_ONLY();
  error Unlock__VERSION_TOO_HIGH();
  error Unlock__MISSING_TEMPLATE();
  error Unlock__ALREADY_DEPLOYED();
  error Unlock__MISSING_PROXY_ADMIN();
  error Unlock__MISSING_LOCK_TEMPLATE();
  error Unlock__MISSING_LOCK(address lockAddress);
  error Unlock__INVALID_AMOUNT();
  error Unlock__INVALID_TOKEN();

  // Events
  event NewLock(address indexed lockOwner, address indexed newLockAddress);

  event LockUpgraded(address lockAddress, uint16 version);

  event ConfigUnlock(
    address udt,
    address weth,
    uint estimatedGasForPurchase,
    string globalTokenSymbol,
    string globalTokenURI,
    uint chainId
  );

  event SetLockTemplate(address publicLockAddress);

  event GNPChanged(
    uint grossNetworkProduct,
    uint _valueInETH,
    address tokenAddress,
    uint value,
    address lockAddress
  );

  event ResetTrackedValue(uint grossNetworkProduct, uint totalDiscountGranted);

  event UnlockTemplateAdded(address indexed impl, uint16 indexed version);

  event SwapBurnerChanged(
    address indexed oldAddress,
    address indexed newAddress
  );

  // Use initialize instead of a constructor to support proxies (for upgradeability via OZ).
  function initialize(address _unlockOwner) public initializer {
    // We must manually initialize Ownable
    UnlockOwnable.__initializeOwnable(_unlockOwner);
    // add a proxy admin on deployment
    _deployProxyAdmin();
  }

  function initializeProxyAdmin() public onlyOwner {
    if (proxyAdminAddress != address(0)) {
      revert Unlock__ALREADY_DEPLOYED();
    }
    _deployProxyAdmin();
  }

  /**
   * @dev Deploy the ProxyAdmin contract that will manage lock templates upgrades
   * This deploys an instance of ProxyAdmin used by PublicLock transparent proxies.
   */
  function _deployProxyAdmin() private returns (address) {
    proxyAdmin = new ProxyAdmin();
    proxyAdminAddress = address(proxyAdmin);
    return address(proxyAdmin);
  }

  /**
   * @dev Helper to get the version number of a template from his address
   */
  function publicLockVersions(address _impl) external view returns (uint16) {
    return _publicLockVersions[_impl];
  }

  /**
   * @dev Helper to get the address of a template based on its version number
   */
  function publicLockImpls(uint16 _version) external view returns (address) {
    return _publicLockImpls[_version];
  }

  /**
   * @dev Registers a new PublicLock template immplementation
   * The template is identified by a version number
   * Once registered, the template can be used to upgrade an existing Lock
   * @dev This will initialize the template and revokeOwnership.
   */
  function addLockTemplate(address impl, uint16 version) public onlyOwner {
    // if the template has not been initialized,
    // claim the template so that no-one else could
    try IPublicLock(impl).initialize(address(this), 0, address(0), 0, 0, "") {
      // renounce the lock manager role that was added during initialization
      IPublicLock(impl).renounceLockManager();
    } catch {
      // failure means that the template is already initialized
    }

    _publicLockVersions[impl] = version;
    _publicLockImpls[version] = impl;

    emit UnlockTemplateAdded(impl, version);
  }

  /**
   * @notice Create lock (legacy)
   * This deploys a lock for a creator. It also keeps track of the deployed lock.
   * @param _expirationDuration the duration of the lock (pass type(uint).max for unlimited duration)
   * @param _tokenAddress set to the ERC20 token address, or 0 for ETH.
   * @param _keyPrice the price of each key
   * @param _maxNumberOfKeys the maximum nimbers of keys to be edited
   * @param _lockName the name of the lock
   * param _salt [deprec] -- kept only for backwards copatibility
   * This may be implemented as a sequence ID or with RNG. It's used with `create2`
   * to know the lock's address before the transaction is mined.
   * @dev internally call `createUpgradeableLock`
   */
  function createLock(
    uint _expirationDuration,
    address _tokenAddress,
    uint _keyPrice,
    uint _maxNumberOfKeys,
    string calldata _lockName,
    bytes12 // _salt
  ) public returns (address) {
    bytes memory data = abi.encodeWithSignature(
      "initialize(address,uint256,address,uint256,uint256,string)",
      msg.sender,
      _expirationDuration,
      _tokenAddress,
      _keyPrice,
      _maxNumberOfKeys,
      _lockName
    );

    return createUpgradeableLock(data);
  }

  /**
   * @notice Create upgradeable lock
   * This deploys a lock for a creator. It also keeps track of the deployed lock.
   * @param data bytes containing the call to initialize the lock template
   * @dev this call is passed as encoded function - for instance:
   *  bytes memory data = abi.encodeWithSignature(
   *    'initialize(address,uint256,address,uint256,uint256,string)',
   *    msg.sender,
   *    _expirationDuration,
   *    _tokenAddress,
   *    _keyPrice,
   *    _maxNumberOfKeys,
   *    _lockName
   *  );
   * @return address of the create lock
   */
  function createUpgradeableLock(bytes memory data) public returns (address) {
    address newLock = createUpgradeableLockAtVersion(
      data,
      publicLockLatestVersion
    );
    return newLock;
  }

  /**
   * Create an upgradeable lock using a specific PublicLock version
   * @param data bytes containing the call to initialize the lock template
   * (refer to createUpgradeableLock for more details)
   * @param _lockVersion the version of the lock to use
   */
  function createUpgradeableLockAtVersion(
    bytes memory data,
    uint16 _lockVersion
  ) public returns (address) {
    if (proxyAdminAddress == address(0)) {
      revert Unlock__MISSING_PROXY_ADMIN();
    }

    // get lock version
    address publicLockImpl = _publicLockImpls[_lockVersion];
    if (publicLockImpl == address(0)) {
      revert Unlock__MISSING_LOCK_TEMPLATE();
    }

    // deploy a proxy pointing to impl
    TransparentUpgradeableProxy proxy = new TransparentUpgradeableProxy(
      publicLockImpl,
      proxyAdminAddress,
      data
    );
    address payable newLock = payable(address(proxy));

    // assign the new Lock
    locks[newLock] = LockBalances({
      deployed: true,
      totalSales: 0,
      yieldedDiscountTokens: 0
    });

    // trigger event
    emit NewLock(msg.sender, newLock);
    return newLock;
  }

  /**
   * @dev Upgrade a Lock template implementation
   * @param lockAddress the address of the lock to be upgraded
   * @param version the version number of the template
   * @custom:oz-upgrades-unsafe-allow-reachable delegatecall
   */

  function upgradeLock(
    address payable lockAddress,
    uint16 version
  ) external returns (address) {
    if (proxyAdminAddress == address(0)) {
      revert Unlock__MISSING_PROXY_ADMIN();
    }

    // check perms
    if (_isLockManager(lockAddress, msg.sender) != true) {
      revert Unlock__MANAGER_ONLY();
    }

    // check version
    IPublicLock lock = IPublicLock(lockAddress);
    uint16 currentVersion = lock.publicLockVersion();

    if (version != currentVersion + 1) {
      revert Unlock__VERSION_TOO_HIGH();
    }

    // make our upgrade
    address impl = _publicLockImpls[version];
    if (impl == address(0)) {
      revert Unlock__MISSING_TEMPLATE();
    }

    ITransparentUpgradeableProxy proxy = ITransparentUpgradeableProxy(
      lockAddress
    );

    proxyAdmin.upgrade(proxy, impl);

    // let's upgrade the data schema
    // the function is called with empty bytes as migration behaviour is set by the lock in accordance to data version
    lock.migrate("0x");

    emit LockUpgraded(lockAddress, version);
    return lockAddress;
  }

  function _isLockManager(
    address lockAddress,
    address _sender
  ) private view returns (bool isManager) {
    IPublicLock lock = IPublicLock(lockAddress);
    return lock.isLockManager(_sender);
  }

  /**
   * @notice [DEPRECATED] Call to this function has been removed from PublicLock > v9.
   * @dev [DEPRECATED] Kept for backwards compatibility
   */
  function computeAvailableDiscountFor(
    address /* _purchaser */,
    uint /* _keyPrice */
  ) public pure returns (uint discount, uint tokens) {
    return (0, 0);
  }

  /**
   * Helper to get the network mining basefee as introduced in EIP-1559
   * @dev this helper can be wrapped in try/catch statement to avoid
   * revert in networks where EIP-1559 is not implemented
   */
  function networkBaseFee() external view returns (uint) {
    return block.basefee;
  }

  /**
   * This function keeps track of the added GDP, as well as grants of discount tokens
   * to the referrer, if applicable.
   * The number of discount tokens granted is based on the value of the referal,
   * the current growth rate and the lock's discount token distribution rate
   * This function is invoked by a previously deployed lock only.
   */
  function recordKeyPurchase(
    uint _value,
    address _referrer
  ) public onlyFromDeployedLock {
    if (_value > 0) {
      uint valueInETH;
      address tokenAddress = IPublicLock(msg.sender).tokenAddress();
      if (tokenAddress != address(0) && tokenAddress != weth) {
        // If priced in an ERC-20 token, find the supported uniswap oracle
        IUniswapOracleV3 oracle = uniswapOracles[tokenAddress];
        if (address(oracle) != address(0)) {
          valueInETH = oracle.updateAndConsult(tokenAddress, _value, weth);
        }
      } else {
        // If priced in ETH (or value is 0), no conversion is required
        valueInETH = _value;
      }

      updateGrossNetworkProduct(
        valueInETH,
        tokenAddress,
        _value,
        msg.sender // lockAddress
      );

      // If GNP does not overflow, the lock totalSales should be safe
      locks[msg.sender].totalSales += valueInETH;

      // Distribute UDT
      // version 13 is the first version for which locks can be paying the fee.
      // Prior versions should not distribute UDT if they don't "pay" the fee.
      if (
        _referrer != address(0) &&
        IPublicLock(msg.sender).publicLockVersion() >= 13
      ) {
        IUniswapOracleV3 udtOracle = uniswapOracles[udt];
        if (address(udtOracle) != address(0)) {
          // Get the value of 1 UDT (w/ 18 decimals) in ETH
          uint udtPrice = udtOracle.updateAndConsult(udt, 10 ** 18, weth);

          uint balance = IMintableERC20(udt).balanceOf(address(this));

          // base fee default to 100 GWEI for chains that does
          uint baseFee;
          try this.networkBaseFee() returns (uint _basefee) {
            // no assigned value
            if (_basefee == 0) {
              baseFee = 100;
            } else {
              baseFee = _basefee;
            }
          } catch {
            // block.basefee not supported
            baseFee = 100;
          }

          // tokensToDistribute is either == to the gas cost
          uint tokensToDistribute = ((estimatedGasForPurchase * baseFee) *
            (10 ** 18)) / udtPrice;

          // or tokensToDistribute is capped by network GDP growth
          // we distribute tokens using asymptotic curve between 0 and 0.5
          uint maxTokens = (balance * valueInETH) /
            (2 + (2 * valueInETH) / grossNetworkProduct) /
            grossNetworkProduct;

          // cap to GDP growth!
          if (tokensToDistribute > maxTokens) {
            tokensToDistribute = maxTokens;
          }

          if (tokensToDistribute > 0) {
            if (balance > tokensToDistribute) {
              // Only distribute if there are enough tokens
              IMintableERC20(udt).transfer(_referrer, tokensToDistribute);
            }
          }
        }
      }
    }
  }

  /**
   * Update the GNP by a new value.
   * Emits an event to simply tracking
   */
  function updateGrossNetworkProduct(
    uint _valueInETH,
    address _tokenAddress,
    uint _value,
    address _lock
  ) internal {
    // increase GNP
    grossNetworkProduct = grossNetworkProduct + _valueInETH;

    emit GNPChanged(
      grossNetworkProduct,
      _valueInETH,
      _tokenAddress,
      _value,
      _lock
    );
  }

  /**
   * @notice [DEPRECATED] Call to this function has been removed from PublicLock > v9.
   * @dev [DEPRECATED] only Kept for backwards compatibility
   */
  function recordConsumedDiscount(
    uint /* _discount */,
    uint /* _tokens */
  ) public view onlyFromDeployedLock {
    return;
  }

  // The version number of the current Unlock implementation on this network
  function unlockVersion() external pure returns (uint16) {
    return 13;
  }

  /**
   * Set the fee used by the protocol
   * @param _protocolFee fee in basic point
   */
  function setProtocolFee(uint _protocolFee) external onlyOwner {
    protocolFee = _protocolFee;
  }

  /**
   * Set the UDT Swap and Burn contract address
   * @param _swapBurnerAddress the address of the SwapBurner contract instance
   */
  function setSwapBurner(address _swapBurnerAddress) external onlyOwner {
    address prevSwapBurnerAddress = swapBurnerAddress;
    swapBurnerAddress = _swapBurnerAddress;
    emit SwapBurnerChanged(prevSwapBurnerAddress, swapBurnerAddress);
  }

  /**
   * @notice Allows the owner to update configuration variables
   */
  function configUnlock(
    address _udt,
    address _weth,
    uint _estimatedGasForPurchase,
    string calldata _symbol,
    string calldata _URI,
    uint _chainId
  ) external onlyOwner {
    udt = _udt;
    weth = _weth;
    estimatedGasForPurchase = _estimatedGasForPurchase;

    globalTokenSymbol = _symbol;
    globalBaseTokenURI = _URI;

    chainId = _chainId;

    emit ConfigUnlock(
      _udt,
      _weth,
      _estimatedGasForPurchase,
      _symbol,
      _URI,
      _chainId
    );
  }

  /**
   * @notice Set the default PublicLock template to use when creating locks
   */
  function setLockTemplate(address _publicLockAddress) external onlyOwner {
    if (_publicLockVersions[_publicLockAddress] == 0) {
      revert Unlock__MISSING_LOCK_TEMPLATE();
    }
    // set latest version
    publicLockLatestVersion = _publicLockVersions[_publicLockAddress];
    // set corresponding template
    publicLockAddress = _publicLockAddress;
    emit SetLockTemplate(_publicLockAddress);
  }

  /**
   * @notice allows the owner to set the oracle address to use for value conversions
   * setting the _oracleAddress to address(0) removes support for the token
   * @dev This will also call update to ensure at least one datapoint has been recorded.
   */
  function setOracle(
    address _tokenAddress,
    address _oracleAddress
  ) external onlyOwner {
    uniswapOracles[_tokenAddress] = IUniswapOracleV3(_oracleAddress);
    if (_oracleAddress != address(0)) {
      IUniswapOracleV3(_oracleAddress).update(_tokenAddress, weth);
    }
  }

  // Allows the owner to change the value tracking variables as needed.
  function resetTrackedValue(
    uint _grossNetworkProduct,
    uint _totalDiscountGranted
  ) external onlyOwner {
    grossNetworkProduct = _grossNetworkProduct;
    totalDiscountGranted = _totalDiscountGranted;

    emit ResetTrackedValue(_grossNetworkProduct, _totalDiscountGranted);
  }

  /**
   * @dev Redundant with globalBaseTokenURI() for backwards compatibility with v3 & v4 locks.
   */
  function getGlobalBaseTokenURI() external view returns (string memory) {
    return globalBaseTokenURI;
  }

  /**
   * @dev Redundant with globalTokenSymbol() for backwards compatibility with v3 & v4 locks.
   */
  function getGlobalTokenSymbol() external view returns (string memory) {
    return globalTokenSymbol;
  }

  // for doc, see IUnlock.sol
  function getAdmin() public view returns (address) {
    bytes32 _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
  }

  // for doc, see IUnlock.sol
  function postLockUpgrade() public {
    // check if lock hasnot already been deployed here and version is correct
    if (
      locks[msg.sender].deployed == false &&
      IPublicLock(msg.sender).publicLockVersion() == 13 &&
      block.chainid == 1 &&
      IPublicLock(msg.sender).unlockProtocol() ==
      0x3d5409CcE1d45233dE1D4eBDEe74b8E004abDD13 // hardcoded address of previous Unlock
    ) {
      IUnlock previousUnlock = IUnlock(
        0x3d5409CcE1d45233dE1D4eBDEe74b8E004abDD13
      );

      (
        bool deployed,
        uint totalSales,
        uint yieldedDiscountTokens
      ) = previousUnlock.locks(msg.sender);

      // record lock from old Unlock in this one
      if (deployed) {
        locks[msg.sender] = LockBalances(
          deployed,
          totalSales,
          yieldedDiscountTokens
        );
      } else {
        revert Unlock__MISSING_LOCK(msg.sender);
      }
    }
  }

  /**
   * Internal helper to transfer token held by this contract
   */
  function _transfer(address token, address to, uint256 amount) internal {
    if (token != address(0)) {
      IMintableERC20(token).transfer(to, amount);
    } else {
      payable(to).transfer(amount);
    }
  }

  /**
   * Functions which transfers tokens held by the contract
   * It handles both ERC20 and the base currency.
   * @dev This function is onlyOwner
   * @param token the address of the token to transfer (pass the 0x0 address for the base currency)
   * @param to the address to transfer the tokens to
   * @param amount the amount of tokens to transfer
   */
  function transferTokens(
    address token,
    address to,
    uint256 amount
  ) public onlyOwner {
    _transfer(token, to, amount);
  }

  /**
   * Send tokens held by this contract to the UDT SwapBurner contract. The tokens sent to the
   * contract are then swapped for UDT and UDT itself will be sent to a burner address.
   * @notice This function can be called by anyone (not only the contract owner) as a way to ensure decentralization.
   * @param token the address of the token (zero address for native) to swap and burn
   * @param amount the amount of tokens to swap and burn
   */
  function swapAndBurn(address token, uint256 amount, uint24 poolFee) public {
    if (token == udt) {
      revert Unlock__INVALID_TOKEN();
    }
    _transfer(token, swapBurnerAddress, amount);
    ISwapBurner(swapBurnerAddress).swapAndBurn(token, poolFee);
  }

  /**
   * Removes a lock from the list of locks. This will prevent the lock from being able to receive governance tokens.
   * The lock will still be able to sell its memberships.
   * @dev This function is onlyOwner
   * @param lock address of the lock to remove
   */
  function removeLock(address lock) external onlyOwner {
    delete locks[lock];
  }

  // required to receive ETH / withdraw ETH
  receive() external payable {
    if (msg.value <= 0) {
      revert Unlock__INVALID_AMOUNT();
    }
  }
}

{
  "compilationTarget": {
    "contracts/past-versions/UnlockV13.sol": "TransparentUpgradeableProxy"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 80
  },
  "remappings": []
}