// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

pragma solidity 0.6.5;


/**
 * @title ERC165
 * @dev https://eips.ethereum.org/EIPS/eip-165
 */
interface ERC165 {
    /**
     * @notice Query if a contract implements interface `interfaceId`
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @dev Interface identification is specified in ERC-165. This function
     * uses less than 30,000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

pragma solidity 0.6.5;

import "./ERC165.sol";
import "./ERC721Events.sol";


/**
 * @title ERC721 Non-Fungible Token Standard basic interface
 * @dev see https://eips.ethereum.org/EIPS/eip-721
 */

interface ERC721 is ERC165, ERC721Events {
    function balanceOf(address owner) external view returns (uint256 balance);

    function ownerOf(uint256 tokenId) external view returns (address owner);

    //   function exists(uint256 tokenId) external view returns (bool exists);

    function approve(address to, uint256 tokenId) external;

    function getApproved(uint256 tokenId) external view returns (address operator);

    function setApprovalForAll(address operator, bool approved) external;

    function isApprovedForAll(address owner, address operator) external view returns (bool);

    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

pragma solidity 0.6.5;


/**
 * @title ERC721 Non-Fungible Token Standard basic interface
 * @dev see https://eips.ethereum.org/EIPS/eip-721
 */
interface ERC721Events {
    event Transfer(address indexed _from, address indexed _to, uint256 indexed _tokenId);
    event Approval(address indexed _owner, address indexed _approved, uint256 indexed _tokenId);
    event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

pragma solidity 0.6.5;

import "@openzeppelin/contracts/access/Ownable.sol";


abstract contract IRewardDistributionRecipient is Ownable {
    address public rewardDistribution;

    function notifyRewardAmount(uint256 reward) external virtual;

    modifier onlyRewardDistribution() {
        require(_msgSender() == rewardDistribution, "Caller is not reward distribution");
        _;
    }

    function setRewardDistribution(address _rewardDistribution) external onlyOwner {
        rewardDistribution = _rewardDistribution;
    }
}

pragma solidity 0.6.5;

import "@openzeppelin/contracts/math/Math.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./IRewardDistributionRecipient.sol";
import "../common/Interfaces/ERC721.sol";
import "../common/Libraries/SafeMathWithRequire.sol";


contract LPTokenWrapper {
    using SafeMathWithRequire for uint256;
    using SafeERC20 for IERC20;

    uint256 internal constant DECIMALS_18 = 1000000000000000000;

    IERC20 internal immutable _stakeToken;

    uint256 private _totalSupply;
    mapping(address => uint256) private _balances;

    constructor(IERC20 stakeToken) public {
        _stakeToken = stakeToken;
    }

    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    function stake(uint256 amount) public virtual {
        _totalSupply = _totalSupply.add(amount);
        _balances[msg.sender] = _balances[msg.sender].add(amount);
        _stakeToken.safeTransferFrom(msg.sender, address(this), amount);
    }

    function withdraw(uint256 amount) public virtual {
        _totalSupply = _totalSupply.sub(amount);
        _balances[msg.sender] = _balances[msg.sender].sub(amount);
        _stakeToken.safeTransfer(msg.sender, amount);
    }
}


///@notice Reward Pool based on unipool contract : https://github.com/Synthetixio/Unipool/blob/master/contracts/Unipool.sol
//with the addition of NFT multiplier reward
contract LandWeightedSANDRewardPool is LPTokenWrapper, IRewardDistributionRecipient {
    using SafeMathWithRequire for uint256;

    event RewardAdded(uint256 reward);
    event Staked(address indexed user, uint256 amount);
    event Withdrawn(address indexed user, uint256 amount);
    event RewardPaid(address indexed user, uint256 reward);

    uint256 public immutable duration;

    uint256 public periodFinish = 0;
    uint256 public rewardRate = 0;
    uint256 public lastUpdateTime;
    uint256 public rewardPerTokenStored;
    mapping(address => uint256) public userRewardPerTokenPaid;
    mapping(address => uint256) public rewards;

    uint256 internal constant DECIMALS_9 = 1000000000;
    uint256 internal constant MIDPOINT_9 = 500000000;
    uint256 internal constant NFT_FACTOR_6 = 10000;
    uint256 internal constant NFT_CONSTANT_3 = 9000;
    uint256 internal constant ROOT3_FACTOR = 697;

    IERC20 internal immutable _rewardToken;
    ERC721 internal immutable _multiplierNFToken;

    uint256 internal _totalContributions;
    mapping(address => uint256) internal _contributions;

    constructor(
        IERC20 stakeToken,
        IERC20 rewardToken,
        ERC721 multiplierNFToken,
        uint256 rewardDuration
    ) public LPTokenWrapper(stakeToken) {
        _rewardToken = rewardToken;
        _multiplierNFToken = multiplierNFToken;
        duration = rewardDuration;
    }

    function totalContributions() public view returns (uint256) {
        return _totalContributions;
    }

    function contributionOf(address account) public view returns (uint256) {
        return _contributions[account];
    }

    modifier updateReward(address account) {
        rewardPerTokenStored = rewardPerToken();

        if (block.timestamp >= periodFinish || _totalContributions != 0) {
            // ensure reward past the first staker do not get lost
            lastUpdateTime = lastTimeRewardApplicable();
        }
        if (account != address(0)) {
            rewards[account] = earned(account);
            userRewardPerTokenPaid[account] = rewardPerTokenStored;
        }
        _;
    }

    function lastTimeRewardApplicable() public view returns (uint256) {
        return Math.min(block.timestamp, periodFinish);
    }

    function rewardPerToken() public view returns (uint256) {
        if (totalContributions() == 0) {
            return rewardPerTokenStored;
        }
        return rewardPerTokenStored.add(lastTimeRewardApplicable().sub(lastUpdateTime).mul(rewardRate).mul(1e24).div(totalContributions()));
    }

    function earned(address account) public view returns (uint256) {
        return contributionOf(account).mul(rewardPerToken().sub(userRewardPerTokenPaid[account])).div(1e24).add(rewards[account]);
    }

    function computeContribution(uint256 amountStaked, uint256 numLands) public pure returns (uint256) {
        if (numLands == 0) {
            return amountStaked;
        }
        uint256 nftContrib = NFT_FACTOR_6.mul(NFT_CONSTANT_3.add(numLands.sub(1).mul(ROOT3_FACTOR).add(1).cbrt3()));
        if (nftContrib > MIDPOINT_9) {
            nftContrib = MIDPOINT_9.add(nftContrib.sub(MIDPOINT_9).div(10));
        }
        return amountStaked.add(amountStaked.mul(nftContrib).div(DECIMALS_9));
    }

    function stake(uint256 amount) public override updateReward(msg.sender) {
        require(amount > 0, "Cannot stake 0");
        uint256 contribution = computeContribution(amount, _multiplierNFToken.balanceOf(msg.sender));
        _totalContributions = _totalContributions.add(contribution);
        _contributions[msg.sender] = _contributions[msg.sender].add(contribution);
        super.stake(amount);
        emit Staked(msg.sender, amount);
    }

    function withdraw(uint256 amount) public override updateReward(msg.sender) {
        require(amount > 0, "Cannot withdraw 0");
        uint256 balance = balanceOf(msg.sender);
        uint256 ratio = amount.mul(DECIMALS_18).div(balance);
        uint256 currentContribution = contributionOf(msg.sender);
        uint256 contributionReduction = currentContribution.mul(ratio).div(DECIMALS_18);
        _contributions[msg.sender] = currentContribution.sub(contributionReduction);
        _totalContributions = _totalContributions.sub(contributionReduction);
        super.withdraw(amount);
        emit Withdrawn(msg.sender, amount);
    }

    function exit() external {
        withdraw(balanceOf(msg.sender));
        getReward();
    }

    function getReward() public updateReward(msg.sender) {
        uint256 reward = rewards[msg.sender];
        if (reward > 0) {
            rewards[msg.sender] = 0;
            _rewardToken.safeTransfer(msg.sender, reward);
            emit RewardPaid(msg.sender, reward);
        }
    }

    ///@notice to be called after the amount of reward tokens (specified by the reward parameter) has been sent to the contract
    // Note that the reward should be divisible by the duration to avoid reward token lost
    ///@param reward number of token to be distributed over the duration
    function notifyRewardAmount(uint256 reward) external override onlyRewardDistribution updateReward(address(0)) {
        if (block.timestamp >= periodFinish) {
            rewardRate = reward.div(duration);
        } else {
            uint256 remaining = periodFinish.sub(block.timestamp);
            uint256 leftover = remaining.mul(rewardRate);
            rewardRate = reward.add(leftover).div(duration);
        }
        lastUpdateTime = block.timestamp;
        periodFinish = block.timestamp.add(duration);
        emit RewardAdded(reward);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

pragma solidity 0.6.5;


/**
 * @title SafeMath
 * @dev Math operations with safety checks that revert
 */
library SafeMathWithRequire {
    using SafeMathWithRequire for uint256;

    uint256 constant DECIMALS_18 = 1000000000000000000;
    uint256 constant DECIMALS_12 = 1000000000000;
    uint256 constant DECIMALS_9 = 1000000000;
    uint256 constant DECIMALS_6 = 1000000;

    /**
     * @dev Multiplies two numbers, throws on overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
        // Gas optimization: this is cheaper than asserting 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        c = a * b;
        require(c / a == b, "overflow");
        return c;
    }

    /**
     * @dev Integer division of two numbers, truncating the quotient.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "divbyzero");
        // uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return a / b;
    }

    /**
     * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "undeflow");
        return a - b;
    }

    /**
     * @dev Adds two numbers, throws on overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
        c = a + b;
        require(c >= a, "overflow");
        return c;
    }

    function sqrt6(uint256 a) internal pure returns (uint256 c) {
        a = a.mul(DECIMALS_12);
        uint256 tmp = a.add(1) / 2;
        c = a;
        // tmp cannot be zero unless a = 0 which skip the loop
        while (tmp < c) {
            c = tmp;
            tmp = ((a / tmp) + tmp) / 2;
        }
    }

    function sqrt3(uint256 a) internal pure returns (uint256 c) {
        a = a.mul(DECIMALS_6);
        uint256 tmp = a.add(1) / 2;
        c = a;
        // tmp cannot be zero unless a = 0 which skip the loop
        while (tmp < c) {
            c = tmp;
            tmp = ((a / tmp) + tmp) / 2;
        }
    }

    function cbrt6(uint256 a) internal pure returns (uint256 c) {
        a = a.mul(DECIMALS_18);
        uint256 tmp = a.add(2) / 3;
        c = a;
        // tmp cannot be zero unless a = 0 which skip the loop
        while (tmp < c) {
            c = tmp;
            uint256 tmpSquare = tmp**2;
            require(tmpSquare > tmp, "overflow");
            tmp = ((a / tmpSquare) + (tmp * 2)) / 3;
        }
        return c;
    }

    function cbrt3(uint256 a) internal pure returns (uint256 c) {
        a = a.mul(DECIMALS_9);
        uint256 tmp = a.add(2) / 3;
        c = a;
        // tmp cannot be zero unless a = 0 which skip the loop
        while (tmp < c) {
            c = tmp;
            uint256 tmpSquare = tmp**2;
            require(tmpSquare > tmp, "overflow");
            tmp = ((a / tmpSquare) + (tmp * 2)) / 3;
        }
        return c;
    }

    // TODO test
    function rt6_3(uint256 a) internal pure returns (uint256 c) {
        a = a.mul(DECIMALS_18);
        uint256 tmp = a.add(5) / 6;
        c = a;
        // tmp cannot be zero unless a = 0 which skip the loop
        while (tmp < c) {
            c = tmp;
            uint256 tmpFive = tmp**5;
            require(tmpFive > tmp, "overflow");
            tmp = ((a / tmpFive) + (tmp * 5)) / 6;
        }
    }
}

{
  "compilationTarget": {
    "src/LiquidityMining/LandWeightedSANDRewardPool.sol": "LandWeightedSANDRewardPool"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 2000
  },
  "remappings": []
}