// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.23;

/* solhint-disable reason-string */

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import "../interfaces/IPaymaster.sol";
import "../interfaces/IEntryPoint.sol";
import "./UserOperationLib.sol";
/**
 * Helper class for creating a paymaster.
 * provides helper methods for staking.
 * Validates that the postOp is called only by the entryPoint.
 */
abstract contract BasePaymaster is IPaymaster, Ownable {
    IEntryPoint public immutable entryPoint;

    uint256 internal constant PAYMASTER_VALIDATION_GAS_OFFSET = UserOperationLib.PAYMASTER_VALIDATION_GAS_OFFSET;
    uint256 internal constant PAYMASTER_POSTOP_GAS_OFFSET = UserOperationLib.PAYMASTER_POSTOP_GAS_OFFSET;
    uint256 internal constant PAYMASTER_DATA_OFFSET = UserOperationLib.PAYMASTER_DATA_OFFSET;

    constructor(IEntryPoint _entryPoint) Ownable(msg.sender) {
        _validateEntryPointInterface(_entryPoint);
        entryPoint = _entryPoint;
    }

    //sanity check: make sure this EntryPoint was compiled against the same
    // IEntryPoint of this paymaster
    function _validateEntryPointInterface(IEntryPoint _entryPoint) internal virtual {
        require(IERC165(address(_entryPoint)).supportsInterface(type(IEntryPoint).interfaceId), "IEntryPoint interface mismatch");
    }

    /// @inheritdoc IPaymaster
    function validatePaymasterUserOp(
        PackedUserOperation calldata userOp,
        bytes32 userOpHash,
        uint256 maxCost
    ) external override returns (bytes memory context, uint256 validationData) {
        _requireFromEntryPoint();
        return _validatePaymasterUserOp(userOp, userOpHash, maxCost);
    }

    /**
     * Validate a user operation.
     * @param userOp     - The user operation.
     * @param userOpHash - The hash of the user operation.
     * @param maxCost    - The maximum cost of the user operation.
     */
    function _validatePaymasterUserOp(
        PackedUserOperation calldata userOp,
        bytes32 userOpHash,
        uint256 maxCost
    ) internal virtual returns (bytes memory context, uint256 validationData);

    /// @inheritdoc IPaymaster
    function postOp(
        PostOpMode mode,
        bytes calldata context,
        uint256 actualGasCost,
        uint256 actualUserOpFeePerGas
    ) external override {
        _requireFromEntryPoint();
        _postOp(mode, context, actualGasCost, actualUserOpFeePerGas);
    }

    /**
     * Post-operation handler.
     * (verified to be called only through the entryPoint)
     * @dev If subclass returns a non-empty context from validatePaymasterUserOp,
     *      it must also implement this method.
     * @param mode          - Enum with the following options:
     *                        opSucceeded - User operation succeeded.
     *                        opReverted  - User op reverted. The paymaster still has to pay for gas.
     *                        postOpReverted - never passed in a call to postOp().
     * @param context       - The context value returned by validatePaymasterUserOp
     * @param actualGasCost - Actual gas used so far (without this postOp call).
     * @param actualUserOpFeePerGas - the gas price this UserOp pays. This value is based on the UserOp's maxFeePerGas
     *                        and maxPriorityFee (and basefee)
     *                        It is not the same as tx.gasprice, which is what the bundler pays.
     */
    function _postOp(
        PostOpMode mode,
        bytes calldata context,
        uint256 actualGasCost,
        uint256 actualUserOpFeePerGas
    ) internal virtual {
        (mode, context, actualGasCost, actualUserOpFeePerGas); // unused params
        // subclass must override this method if validatePaymasterUserOp returns a context
        revert("must override");
    }

    /**
     * Add a deposit for this paymaster, used for paying for transaction fees.
     */
    function deposit() public payable {
        entryPoint.depositTo{value: msg.value}(address(this));
    }

    /**
     * Withdraw value from the deposit.
     * @param withdrawAddress - Target to send to.
     * @param amount          - Amount to withdraw.
     */
    function withdrawTo(
        address payable withdrawAddress,
        uint256 amount
    ) public onlyOwner {
        entryPoint.withdrawTo(withdrawAddress, amount);
    }

    /**
     * Add stake for this paymaster.
     * This method can also carry eth value to add to the current stake.
     * @param unstakeDelaySec - The unstake delay for this paymaster. Can only be increased.
     */
    function addStake(uint32 unstakeDelaySec) external payable onlyOwner {
        entryPoint.addStake{value: msg.value}(unstakeDelaySec);
    }

    /**
     * Return current paymaster's deposit on the entryPoint.
     */
    function getDeposit() public view returns (uint256) {
        return entryPoint.balanceOf(address(this));
    }

    /**
     * Unlock the stake, in order to withdraw it.
     * The paymaster can't serve requests once unlocked, until it calls addStake again
     */
    function unlockStake() external onlyOwner {
        entryPoint.unlockStake();
    }

    /**
     * Withdraw the entire paymaster's stake.
     * stake must be unlocked first (and then wait for the unstakeDelay to be over)
     * @param withdrawAddress - The address to send withdrawn value.
     */
    function withdrawStake(address payable withdrawAddress) external onlyOwner {
        entryPoint.withdrawStake(withdrawAddress);
    }

    /**
     * Validate the call is made from a valid entrypoint
     */
    function _requireFromEntryPoint() internal virtual {
        require(msg.sender == address(entryPoint), "Sender not EntryPoint");
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.23;

/* solhint-disable no-inline-assembly */


 /*
  * For simulation purposes, validateUserOp (and validatePaymasterUserOp)
  * must return this value in case of signature failure, instead of revert.
  */
uint256 constant SIG_VALIDATION_FAILED = 1;


/*
 * For simulation purposes, validateUserOp (and validatePaymasterUserOp)
 * return this value on success.
 */
uint256 constant SIG_VALIDATION_SUCCESS = 0;


/**
 * Returned data from validateUserOp.
 * validateUserOp returns a uint256, which is created by `_packedValidationData` and
 * parsed by `_parseValidationData`.
 * @param aggregator  - address(0) - The account validated the signature by itself.
 *                      address(1) - The account failed to validate the signature.
 *                      otherwise - This is an address of a signature aggregator that must
 *                                  be used to validate the signature.
 * @param validAfter  - This UserOp is valid only after this timestamp.
 * @param validaUntil - This UserOp is valid only up to this timestamp.
 */
struct ValidationData {
    address aggregator;
    uint48 validAfter;
    uint48 validUntil;
}

/**
 * Extract sigFailed, validAfter, validUntil.
 * Also convert zero validUntil to type(uint48).max.
 * @param validationData - The packed validation data.
 */
function _parseValidationData(
    uint256 validationData
) pure returns (ValidationData memory data) {
    address aggregator = address(uint160(validationData));
    uint48 validUntil = uint48(validationData >> 160);
    if (validUntil == 0) {
        validUntil = type(uint48).max;
    }
    uint48 validAfter = uint48(validationData >> (48 + 160));
    return ValidationData(aggregator, validAfter, validUntil);
}

/**
 * Helper to pack the return value for validateUserOp.
 * @param data - The ValidationData to pack.
 */
function _packValidationData(
    ValidationData memory data
) pure returns (uint256) {
    return
        uint160(data.aggregator) |
        (uint256(data.validUntil) << 160) |
        (uint256(data.validAfter) << (160 + 48));
}

/**
 * Helper to pack the return value for validateUserOp, when not using an aggregator.
 * @param sigFailed  - True for signature failure, false for success.
 * @param validUntil - Last timestamp this UserOperation is valid (or zero for infinite).
 * @param validAfter - First timestamp this UserOperation is valid.
 */
function _packValidationData(
    bool sigFailed,
    uint48 validUntil,
    uint48 validAfter
) pure returns (uint256) {
    return
        (sigFailed ? 1 : 0) |
        (uint256(validUntil) << 160) |
        (uint256(validAfter) << (160 + 48));
}

/**
 * keccak function over calldata.
 * @dev copy calldata into memory, do keccak and drop allocated memory. Strangely, this is more efficient than letting solidity do it.
 */
    function calldataKeccak(bytes calldata data) pure returns (bytes32 ret) {
        assembly ("memory-safe") {
            let mem := mload(0x40)
            let len := data.length
            calldatacopy(mem, data.offset, len)
            ret := keccak256(mem, len)
        }
    }


/**
 * The minimum of two numbers.
 * @param a - First number.
 * @param b - Second number.
 */
    function min(uint256 a, uint256 b) pure returns (uint256) {
        return a < b ? a : b;
    }

// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.7.5;

import "./PackedUserOperation.sol";

/**
 * Aggregated Signatures validator.
 */
interface IAggregator {
    /**
     * Validate aggregated signature.
     * Revert if the aggregated signature does not match the given list of operations.
     * @param userOps   - Array of UserOperations to validate the signature for.
     * @param signature - The aggregated signature.
     */
    function validateSignatures(
        PackedUserOperation[] calldata userOps,
        bytes calldata signature
    ) external view;

    /**
     * Validate signature of a single userOp.
     * This method should be called by bundler after EntryPointSimulation.simulateValidation() returns
     * the aggregator this account uses.
     * First it validates the signature over the userOp. Then it returns data to be used when creating the handleOps.
     * @param userOp        - The userOperation received from the user.
     * @return sigForUserOp - The value to put into the signature field of the userOp when calling handleOps.
     *                        (usually empty, unless account and aggregator support some kind of "multisig".
     */
    function validateUserOpSignature(
        PackedUserOperation calldata userOp
    ) external view returns (bytes memory sigForUserOp);

    /**
     * Aggregate multiple signatures into a single value.
     * This method is called off-chain to calculate the signature to pass with handleOps()
     * bundler MAY use optimized custom code perform this aggregation.
     * @param userOps              - Array of UserOperations to collect the signatures from.
     * @return aggregatedSignature - The aggregated signature.
     */
    function aggregateSignatures(
        PackedUserOperation[] calldata userOps
    ) external view returns (bytes memory aggregatedSignature);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

/**
 ** Account-Abstraction (EIP-4337) singleton EntryPoint implementation.
 ** Only one instance required on each chain.
 **/
// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.7.5;

/* solhint-disable avoid-low-level-calls */
/* solhint-disable no-inline-assembly */
/* solhint-disable reason-string */

import "./PackedUserOperation.sol";
import "./IStakeManager.sol";
import "./IAggregator.sol";
import "./INonceManager.sol";

interface IEntryPoint is IStakeManager, INonceManager {
    /***
     * An event emitted after each successful request.
     * @param userOpHash    - Unique identifier for the request (hash its entire content, except signature).
     * @param sender        - The account that generates this request.
     * @param paymaster     - If non-null, the paymaster that pays for this request.
     * @param nonce         - The nonce value from the request.
     * @param success       - True if the sender transaction succeeded, false if reverted.
     * @param actualGasCost - Actual amount paid (by account or paymaster) for this UserOperation.
     * @param actualGasUsed - Total gas used by this UserOperation (including preVerification, creation,
     *                        validation and execution).
     */
    event UserOperationEvent(
        bytes32 indexed userOpHash,
        address indexed sender,
        address indexed paymaster,
        uint256 nonce,
        bool success,
        uint256 actualGasCost,
        uint256 actualGasUsed
    );

    /**
     * Account "sender" was deployed.
     * @param userOpHash - The userOp that deployed this account. UserOperationEvent will follow.
     * @param sender     - The account that is deployed
     * @param factory    - The factory used to deploy this account (in the initCode)
     * @param paymaster  - The paymaster used by this UserOp
     */
    event AccountDeployed(
        bytes32 indexed userOpHash,
        address indexed sender,
        address factory,
        address paymaster
    );

    /**
     * An event emitted if the UserOperation "callData" reverted with non-zero length.
     * @param userOpHash   - The request unique identifier.
     * @param sender       - The sender of this request.
     * @param nonce        - The nonce used in the request.
     * @param revertReason - The return bytes from the (reverted) call to "callData".
     */
    event UserOperationRevertReason(
        bytes32 indexed userOpHash,
        address indexed sender,
        uint256 nonce,
        bytes revertReason
    );

    /**
     * An event emitted if the UserOperation Paymaster's "postOp" call reverted with non-zero length.
     * @param userOpHash   - The request unique identifier.
     * @param sender       - The sender of this request.
     * @param nonce        - The nonce used in the request.
     * @param revertReason - The return bytes from the (reverted) call to "callData".
     */
    event PostOpRevertReason(
        bytes32 indexed userOpHash,
        address indexed sender,
        uint256 nonce,
        bytes revertReason
    );

    /**
     * UserOp consumed more than prefund. The UserOperation is reverted, and no refund is made.
     * @param userOpHash   - The request unique identifier.
     * @param sender       - The sender of this request.
     * @param nonce        - The nonce used in the request.
     */
    event UserOperationPrefundTooLow(
        bytes32 indexed userOpHash,
        address indexed sender,
        uint256 nonce
    );

    /**
     * An event emitted by handleOps(), before starting the execution loop.
     * Any event emitted before this event, is part of the validation.
     */
    event BeforeExecution();

    /**
     * Signature aggregator used by the following UserOperationEvents within this bundle.
     * @param aggregator - The aggregator used for the following UserOperationEvents.
     */
    event SignatureAggregatorChanged(address indexed aggregator);

    /**
     * A custom revert error of handleOps, to identify the offending op.
     * Should be caught in off-chain handleOps simulation and not happen on-chain.
     * Useful for mitigating DoS attempts against batchers or for troubleshooting of factory/account/paymaster reverts.
     * NOTE: If simulateValidation passes successfully, there should be no reason for handleOps to fail on it.
     * @param opIndex - Index into the array of ops to the failed one (in simulateValidation, this is always zero).
     * @param reason  - Revert reason. The string starts with a unique code "AAmn",
     *                  where "m" is "1" for factory, "2" for account and "3" for paymaster issues,
     *                  so a failure can be attributed to the correct entity.
     */
    error FailedOp(uint256 opIndex, string reason);

    /**
     * A custom revert error of handleOps, to report a revert by account or paymaster.
     * @param opIndex - Index into the array of ops to the failed one (in simulateValidation, this is always zero).
     * @param reason  - Revert reason. see FailedOp(uint256,string), above
     * @param inner   - data from inner cought revert reason
     * @dev note that inner is truncated to 2048 bytes
     */
    error FailedOpWithRevert(uint256 opIndex, string reason, bytes inner);

    error PostOpReverted(bytes returnData);

    /**
     * Error case when a signature aggregator fails to verify the aggregated signature it had created.
     * @param aggregator The aggregator that failed to verify the signature
     */
    error SignatureValidationFailed(address aggregator);

    // Return value of getSenderAddress.
    error SenderAddressResult(address sender);

    // UserOps handled, per aggregator.
    struct UserOpsPerAggregator {
        PackedUserOperation[] userOps;
        // Aggregator address
        IAggregator aggregator;
        // Aggregated signature
        bytes signature;
    }

    /**
     * Execute a batch of UserOperations.
     * No signature aggregator is used.
     * If any account requires an aggregator (that is, it returned an aggregator when
     * performing simulateValidation), then handleAggregatedOps() must be used instead.
     * @param ops         - The operations to execute.
     * @param beneficiary - The address to receive the fees.
     */
    function handleOps(
        PackedUserOperation[] calldata ops,
        address payable beneficiary
    ) external;

    /**
     * Execute a batch of UserOperation with Aggregators
     * @param opsPerAggregator - The operations to execute, grouped by aggregator (or address(0) for no-aggregator accounts).
     * @param beneficiary      - The address to receive the fees.
     */
    function handleAggregatedOps(
        UserOpsPerAggregator[] calldata opsPerAggregator,
        address payable beneficiary
    ) external;

    /**
     * Generate a request Id - unique identifier for this request.
     * The request ID is a hash over the content of the userOp (except the signature), the entrypoint and the chainid.
     * @param userOp - The user operation to generate the request ID for.
     * @return hash the hash of this UserOperation
     */
    function getUserOpHash(
        PackedUserOperation calldata userOp
    ) external view returns (bytes32);

    /**
     * Gas and return values during simulation.
     * @param preOpGas         - The gas used for validation (including preValidationGas)
     * @param prefund          - The required prefund for this operation
     * @param accountValidationData   - returned validationData from account.
     * @param paymasterValidationData - return validationData from paymaster.
     * @param paymasterContext - Returned by validatePaymasterUserOp (to be passed into postOp)
     */
    struct ReturnInfo {
        uint256 preOpGas;
        uint256 prefund;
        uint256 accountValidationData;
        uint256 paymasterValidationData;
        bytes paymasterContext;
    }

    /**
     * Returned aggregated signature info:
     * The aggregator returned by the account, and its current stake.
     */
    struct AggregatorStakeInfo {
        address aggregator;
        StakeInfo stakeInfo;
    }

    /**
     * Get counterfactual sender address.
     * Calculate the sender contract address that will be generated by the initCode and salt in the UserOperation.
     * This method always revert, and returns the address in SenderAddressResult error
     * @param initCode - The constructor code to be passed into the UserOperation.
     */
    function getSenderAddress(bytes memory initCode) external;

    error DelegateAndRevert(bool success, bytes ret);

    /**
     * Helper method for dry-run testing.
     * @dev calling this method, the EntryPoint will make a delegatecall to the given data, and report (via revert) the result.
     *  The method always revert, so is only useful off-chain for dry run calls, in cases where state-override to replace
     *  actual EntryPoint code is less convenient.
     * @param target a target contract to make a delegatecall from entrypoint
     * @param data data to pass to target in a delegatecall
     */
    function delegateAndRevert(address target, bytes calldata data) external;
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.7.5;

import "./PackedUserOperation.sol";
import "./IEntryPoint.sol";

interface IEntryPointSimulations is IEntryPoint {
    // Return value of simulateHandleOp.
    struct ExecutionResult {
        uint256 preOpGas;
        uint256 paid;
        uint256 accountValidationData;
        uint256 paymasterValidationData;
        bool targetSuccess;
        bytes targetResult;
    }

    /**
     * Successful result from simulateValidation.
     * If the account returns a signature aggregator the "aggregatorInfo" struct is filled in as well.
     * @param returnInfo     Gas and time-range returned values
     * @param senderInfo     Stake information about the sender
     * @param factoryInfo    Stake information about the factory (if any)
     * @param paymasterInfo  Stake information about the paymaster (if any)
     * @param aggregatorInfo Signature aggregation info (if the account requires signature aggregator)
     *                       Bundler MUST use it to verify the signature, or reject the UserOperation.
     */
    struct ValidationResult {
        ReturnInfo returnInfo;
        StakeInfo senderInfo;
        StakeInfo factoryInfo;
        StakeInfo paymasterInfo;
        AggregatorStakeInfo aggregatorInfo;
    }

    /**
     * Simulate a call to account.validateUserOp and paymaster.validatePaymasterUserOp.
     * @dev The node must also verify it doesn't use banned opcodes, and that it doesn't reference storage
     *      outside the account's data.
     * @param userOp - The user operation to validate.
     * @return the validation result structure
     */
    function simulateValidation(
        PackedUserOperation calldata userOp
    )
    external
    returns (
        ValidationResult memory
    );

    /**
     * Simulate full execution of a UserOperation (including both validation and target execution)
     * It performs full validation of the UserOperation, but ignores signature error.
     * An optional target address is called after the userop succeeds,
     * and its value is returned (before the entire call is reverted).
     * Note that in order to collect the the success/failure of the target call, it must be executed
     * with trace enabled to track the emitted events.
     * @param op The UserOperation to simulate.
     * @param target         - If nonzero, a target address to call after userop simulation. If called,
     *                         the targetSuccess and targetResult are set to the return from that call.
     * @param targetCallData - CallData to pass to target address.
     * @return the execution result structure
     */
    function simulateHandleOp(
        PackedUserOperation calldata op,
        address target,
        bytes calldata targetCallData
    )
    external
    returns (
        ExecutionResult memory
    );
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.7.5;

interface INonceManager {

    /**
     * Return the next nonce for this sender.
     * Within a given key, the nonce values are sequenced (starting with zero, and incremented by one on each userop)
     * But UserOp with different keys can come with arbitrary order.
     *
     * @param sender the account address
     * @param key the high 192 bit of the nonce
     * @return nonce a full nonce to pass for next UserOp with this sender.
     */
    function getNonce(address sender, uint192 key)
    external view returns (uint256 nonce);

    /**
     * Manually increment the nonce of the sender.
     * This method is exposed just for completeness..
     * Account does NOT need to call it, neither during validation, nor elsewhere,
     * as the EntryPoint will update the nonce regardless.
     * Possible use-case is call it with various keys to "initialize" their nonces to one, so that future
     * UserOperations will not pay extra for the first transaction with a given key.
     */
    function incrementNonce(uint192 key) external;
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.7.5;

import "./PackedUserOperation.sol";

/**
 * The interface exposed by a paymaster contract, who agrees to pay the gas for user's operations.
 * A paymaster must hold a stake to cover the required entrypoint stake and also the gas for the transaction.
 */
interface IPaymaster {
    enum PostOpMode {
        // User op succeeded.
        opSucceeded,
        // User op reverted. Still has to pay for gas.
        opReverted,
        // Only used internally in the EntryPoint (cleanup after postOp reverts). Never calling paymaster with this value
        postOpReverted
    }

    /**
     * Payment validation: check if paymaster agrees to pay.
     * Must verify sender is the entryPoint.
     * Revert to reject this request.
     * Note that bundlers will reject this method if it changes the state, unless the paymaster is trusted (whitelisted).
     * The paymaster pre-pays using its deposit, and receive back a refund after the postOp method returns.
     * @param userOp          - The user operation.
     * @param userOpHash      - Hash of the user's request data.
     * @param maxCost         - The maximum cost of this transaction (based on maximum gas and gas price from userOp).
     * @return context        - Value to send to a postOp. Zero length to signify postOp is not required.
     * @return validationData - Signature and time-range of this operation, encoded the same as the return
     *                          value of validateUserOperation.
     *                          <20-byte> sigAuthorizer - 0 for valid signature, 1 to mark signature failure,
     *                                                    other values are invalid for paymaster.
     *                          <6-byte> validUntil - last timestamp this operation is valid. 0 for "indefinite"
     *                          <6-byte> validAfter - first timestamp this operation is valid
     *                          Note that the validation code cannot use block.timestamp (or block.number) directly.
     */
    function validatePaymasterUserOp(
        PackedUserOperation calldata userOp,
        bytes32 userOpHash,
        uint256 maxCost
    ) external returns (bytes memory context, uint256 validationData);

    /**
     * Post-operation handler.
     * Must verify sender is the entryPoint.
     * @param mode          - Enum with the following options:
     *                        opSucceeded - User operation succeeded.
     *                        opReverted  - User op reverted. The paymaster still has to pay for gas.
     *                        postOpReverted - never passed in a call to postOp().
     * @param context       - The context value returned by validatePaymasterUserOp
     * @param actualGasCost - Actual gas used so far (without this postOp call).
     * @param actualUserOpFeePerGas - the gas price this UserOp pays. This value is based on the UserOp's maxFeePerGas
     *                        and maxPriorityFee (and basefee)
     *                        It is not the same as tx.gasprice, which is what the bundler pays.
     */
    function postOp(
        PostOpMode mode,
        bytes calldata context,
        uint256 actualGasCost,
        uint256 actualUserOpFeePerGas
    ) external;
}

// SPDX-License-Identifier: GPL-3.0-only
pragma solidity >=0.7.5;

/**
 * Manage deposits and stakes.
 * Deposit is just a balance used to pay for UserOperations (either by a paymaster or an account).
 * Stake is value locked for at least "unstakeDelay" by the staked entity.
 */
interface IStakeManager {
    event Deposited(address indexed account, uint256 totalDeposit);

    event Withdrawn(
        address indexed account,
        address withdrawAddress,
        uint256 amount
    );

    // Emitted when stake or unstake delay are modified.
    event StakeLocked(
        address indexed account,
        uint256 totalStaked,
        uint256 unstakeDelaySec
    );

    // Emitted once a stake is scheduled for withdrawal.
    event StakeUnlocked(address indexed account, uint256 withdrawTime);

    event StakeWithdrawn(
        address indexed account,
        address withdrawAddress,
        uint256 amount
    );

    /**
     * @param deposit         - The entity's deposit.
     * @param staked          - True if this entity is staked.
     * @param stake           - Actual amount of ether staked for this entity.
     * @param unstakeDelaySec - Minimum delay to withdraw the stake.
     * @param withdrawTime    - First block timestamp where 'withdrawStake' will be callable, or zero if already locked.
     * @dev Sizes were chosen so that deposit fits into one cell (used during handleOp)
     *      and the rest fit into a 2nd cell (used during stake/unstake)
     *      - 112 bit allows for 10^15 eth
     *      - 48 bit for full timestamp
     *      - 32 bit allows 150 years for unstake delay
     */
    struct DepositInfo {
        uint256 deposit;
        bool staked;
        uint112 stake;
        uint32 unstakeDelaySec;
        uint48 withdrawTime;
    }

    // API struct used by getStakeInfo and simulateValidation.
    struct StakeInfo {
        uint256 stake;
        uint256 unstakeDelaySec;
    }

    /**
     * Get deposit info.
     * @param account - The account to query.
     * @return info   - Full deposit information of given account.
     */
    function getDepositInfo(
        address account
    ) external view returns (DepositInfo memory info);

    /**
     * Get account balance.
     * @param account - The account to query.
     * @return        - The deposit (for gas payment) of the account.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * Add to the deposit of the given account.
     * @param account - The account to add to.
     */
    function depositTo(address account) external payable;

    /**
     * Add to the account's stake - amount and delay
     * any pending unstake is first cancelled.
     * @param _unstakeDelaySec - The new lock duration before the deposit can be withdrawn.
     */
    function addStake(uint32 _unstakeDelaySec) external payable;

    /**
     * Attempt to unlock the stake.
     * The value can be withdrawn (using withdrawStake) after the unstake delay.
     */
    function unlockStake() external;

    /**
     * Withdraw from the (unlocked) stake.
     * Must first call unlockStake and wait for the unstakeDelay to pass.
     * @param withdrawAddress - The address to send withdrawn value.
     */
    function withdrawStake(address payable withdrawAddress) external;

    /**
     * Withdraw from the deposit.
     * @param withdrawAddress - The address to send withdrawn value.
     * @param withdrawAmount  - The amount to withdraw.
     */
    function withdrawTo(
        address payable withdrawAddress,
        uint256 withdrawAmount
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.27;

import {ReentrancyGuard} from "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "account-abstraction/core/Helpers.sol";
import "account-abstraction/core/BasePaymaster.sol";
import "account-abstraction/interfaces/IEntryPoint.sol";
import "account-abstraction/interfaces/IEntryPointSimulations.sol";

contract MEEEntryPoint is BasePaymaster, ReentrancyGuard {
    using UserOperationLib for PackedUserOperation;

    error EmptyMessageValue();
    error InsufficientBalance();

    constructor(IEntryPoint _entryPoint) payable BasePaymaster(_entryPoint) {}

    function handleOps(PackedUserOperation[] calldata ops) public payable {
        if (msg.value == 0) {
            revert EmptyMessageValue();
        }
        entryPoint.depositTo{value: msg.value}(address(this));
        entryPoint.handleOps(ops, payable(msg.sender));
        entryPoint.withdrawTo(payable(msg.sender), entryPoint.getDepositInfo(address(this)).deposit);
    }

    function simulateHandleOp(PackedUserOperation calldata op, address target, bytes calldata callData)
        external
        payable
        returns (IEntryPointSimulations.ExecutionResult memory)
    {
        if (msg.value == 0) {
            revert EmptyMessageValue();
        }
        IEntryPointSimulations entryPointWithSimulations = IEntryPointSimulations(address(entryPoint));
        entryPointWithSimulations.depositTo{value: msg.value}(address(this));
        return entryPointWithSimulations.simulateHandleOp(op, target, callData);
    }

    function simulateValidation(PackedUserOperation calldata op)
        external
        payable
        returns (IEntryPointSimulations.ValidationResult memory)
    {
        if (msg.value == 0) {
            revert EmptyMessageValue();
        }
        IEntryPointSimulations entryPointWithSimulations = IEntryPointSimulations(address(entryPoint));
        entryPointWithSimulations.depositTo{value: msg.value}(address(this));
        return entryPointWithSimulations.simulateValidation(op);
    }

    // accept all userOps
    function _validatePaymasterUserOp(PackedUserOperation calldata userOp, bytes32 userOpHash, uint256 maxCost)
        internal
        virtual
        override
        returns (bytes memory context, uint256 validationData)
    {
        if (entryPoint.getDepositInfo(address(this)).deposit < maxCost) {
            revert InsufficientBalance();
        }
        (uint256 maxGasLimit, uint256 nodeOperatorPremium) =
            abi.decode(userOp.paymasterAndData[PAYMASTER_DATA_OFFSET:], (uint256, uint256));

        return (abi.encode(userOp.sender, userOp.unpackMaxFeePerGas(), maxGasLimit, nodeOperatorPremium), 0);
    }

    /**
     * Post-operation handler.
     * (verified to be called only through the entryPoint)
     * executes userOp and gives back refund to the userOp.sender if userOp.sender has overpaid for execution.
     * @dev if subclass returns a non-empty context from validatePaymasterUserOp, it must also implement this method.
     * @param mode enum with the following options:
     *      opSucceeded - user operation succeeded.
     *      opReverted  - user op reverted. still has to pay for gas.
     *      postOpReverted - user op succeeded, but caused postOp (in mode=opSucceeded) to revert.
     *                       Now this is the 2nd call, after user's op was deliberately reverted.
     * @param context - the context value returned by validatePaymasterUserOp
     * @param actualGasCost - actual gas used so far (without this postOp call).
     */
    function _postOp(PostOpMode mode, bytes calldata context, uint256 actualGasCost, uint256 actualUserOpFeePerGas)
        internal
        virtual
        override
    {
        if (mode == PostOpMode.postOpReverted) {
            return;
        }
        (address sender, uint256 maxFeePerGas, uint256 maxGasLimit, uint256 nodeOperatorPremium) =
            abi.decode(context, (address, uint256, uint256, uint256));

        uint256 refund = calculateRefund(maxGasLimit, maxFeePerGas, actualGasCost, nodeOperatorPremium);
        if (refund > 0) {
            entryPoint.withdrawTo(payable(sender), refund);
        }
    }

    function calculateRefund(
        uint256 maxGasLimit,
        uint256 maxFeePerGas,
        uint256 actualGasCost,
        uint256 nodeOperatorPremium
    ) public pure returns (uint256 refund) {
        uint256 costWithPremium = (actualGasCost * (100 + nodeOperatorPremium)) / 100;

        uint256 maxCost = maxGasLimit * maxFeePerGas;
        if (costWithPremium < maxCost) {
            refund = maxCost - costWithPremium;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.7.5;

/**
 * User Operation struct
 * @param sender                - The sender account of this request.
 * @param nonce                 - Unique value the sender uses to verify it is not a replay.
 * @param initCode              - If set, the account contract will be created by this constructor/
 * @param callData              - The method call to execute on this account.
 * @param accountGasLimits      - Packed gas limits for validateUserOp and gas limit passed to the callData method call.
 * @param preVerificationGas    - Gas not calculated by the handleOps method, but added to the gas paid.
 *                                Covers batch overhead.
 * @param gasFees               - packed gas fields maxPriorityFeePerGas and maxFeePerGas - Same as EIP-1559 gas parameters.
 * @param paymasterAndData      - If set, this field holds the paymaster address, verification gas limit, postOp gas limit and paymaster-specific extra data
 *                                The paymaster will pay for the transaction instead of the sender.
 * @param signature             - Sender-verified signature over the entire request, the EntryPoint address and the chain ID.
 */
struct PackedUserOperation {
    address sender;
    uint256 nonce;
    bytes initCode;
    bytes callData;
    bytes32 accountGasLimits;
    uint256 preVerificationGas;
    bytes32 gasFees;
    bytes paymasterAndData;
    bytes signature;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.23;

/* solhint-disable no-inline-assembly */

import "../interfaces/PackedUserOperation.sol";
import {calldataKeccak, min} from "./Helpers.sol";

/**
 * Utility functions helpful when working with UserOperation structs.
 */
library UserOperationLib {

    uint256 public constant PAYMASTER_VALIDATION_GAS_OFFSET = 20;
    uint256 public constant PAYMASTER_POSTOP_GAS_OFFSET = 36;
    uint256 public constant PAYMASTER_DATA_OFFSET = 52;
    /**
     * Get sender from user operation data.
     * @param userOp - The user operation data.
     */
    function getSender(
        PackedUserOperation calldata userOp
    ) internal pure returns (address) {
        address data;
        //read sender from userOp, which is first userOp member (saves 800 gas...)
        assembly {
            data := calldataload(userOp)
        }
        return address(uint160(data));
    }

    /**
     * Relayer/block builder might submit the TX with higher priorityFee,
     * but the user should not pay above what he signed for.
     * @param userOp - The user operation data.
     */
    function gasPrice(
        PackedUserOperation calldata userOp
    ) internal view returns (uint256) {
        unchecked {
            (uint256 maxPriorityFeePerGas, uint256 maxFeePerGas) = unpackUints(userOp.gasFees);
            if (maxFeePerGas == maxPriorityFeePerGas) {
                //legacy mode (for networks that don't support basefee opcode)
                return maxFeePerGas;
            }
            return min(maxFeePerGas, maxPriorityFeePerGas + block.basefee);
        }
    }

    /**
     * Pack the user operation data into bytes for hashing.
     * @param userOp - The user operation data.
     */
    function encode(
        PackedUserOperation calldata userOp
    ) internal pure returns (bytes memory ret) {
        address sender = getSender(userOp);
        uint256 nonce = userOp.nonce;
        bytes32 hashInitCode = calldataKeccak(userOp.initCode);
        bytes32 hashCallData = calldataKeccak(userOp.callData);
        bytes32 accountGasLimits = userOp.accountGasLimits;
        uint256 preVerificationGas = userOp.preVerificationGas;
        bytes32 gasFees = userOp.gasFees;
        bytes32 hashPaymasterAndData = calldataKeccak(userOp.paymasterAndData);

        return abi.encode(
            sender, nonce,
            hashInitCode, hashCallData,
            accountGasLimits, preVerificationGas, gasFees,
            hashPaymasterAndData
        );
    }

    function unpackUints(
        bytes32 packed
    ) internal pure returns (uint256 high128, uint256 low128) {
        return (uint128(bytes16(packed)), uint128(uint256(packed)));
    }

    //unpack just the high 128-bits from a packed value
    function unpackHigh128(bytes32 packed) internal pure returns (uint256) {
        return uint256(packed) >> 128;
    }

    // unpack just the low 128-bits from a packed value
    function unpackLow128(bytes32 packed) internal pure returns (uint256) {
        return uint128(uint256(packed));
    }

    function unpackMaxPriorityFeePerGas(PackedUserOperation calldata userOp)
    internal pure returns (uint256) {
        return unpackHigh128(userOp.gasFees);
    }

    function unpackMaxFeePerGas(PackedUserOperation calldata userOp)
    internal pure returns (uint256) {
        return unpackLow128(userOp.gasFees);
    }

    function unpackVerificationGasLimit(PackedUserOperation calldata userOp)
    internal pure returns (uint256) {
        return unpackHigh128(userOp.accountGasLimits);
    }

    function unpackCallGasLimit(PackedUserOperation calldata userOp)
    internal pure returns (uint256) {
        return unpackLow128(userOp.accountGasLimits);
    }

    function unpackPaymasterVerificationGasLimit(PackedUserOperation calldata userOp)
    internal pure returns (uint256) {
        return uint128(bytes16(userOp.paymasterAndData[PAYMASTER_VALIDATION_GAS_OFFSET : PAYMASTER_POSTOP_GAS_OFFSET]));
    }

    function unpackPostOpGasLimit(PackedUserOperation calldata userOp)
    internal pure returns (uint256) {
        return uint128(bytes16(userOp.paymasterAndData[PAYMASTER_POSTOP_GAS_OFFSET : PAYMASTER_DATA_OFFSET]));
    }

    function unpackPaymasterStaticFields(
        bytes calldata paymasterAndData
    ) internal pure returns (address paymaster, uint256 validationGasLimit, uint256 postOpGasLimit) {
        return (
            address(bytes20(paymasterAndData[: PAYMASTER_VALIDATION_GAS_OFFSET])),
            uint128(bytes16(paymasterAndData[PAYMASTER_VALIDATION_GAS_OFFSET : PAYMASTER_POSTOP_GAS_OFFSET])),
            uint128(bytes16(paymasterAndData[PAYMASTER_POSTOP_GAS_OFFSET : PAYMASTER_DATA_OFFSET]))
        );
    }

    /**
     * Hash the user operation data.
     * @param userOp - The user operation data.
     */
    function hash(
        PackedUserOperation calldata userOp
    ) internal pure returns (bytes32) {
        return keccak256(encode(userOp));
    }
}

{
  "compilationTarget": {
    "contracts/MEEEntryPoint.sol": "MEEEntryPoint"
  },
  "evmVersion": "cancun",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "none"
  },
  "optimizer": {
    "enabled": true,
    "runs": 999
  },
  "remappings": [
    ":@ERC4337/=node_modules/@ERC4337/",
    ":@erc7579/=node_modules/@erc7579/",
    ":@gnosis.pm/=node_modules/@gnosis.pm/",
    ":@openzeppelin/=node_modules/@openzeppelin/",
    ":@prb/=node_modules/@prb/",
    ":@prb/math/=node_modules/erc7739-validator-base/node_modules/@prb/math/src/",
    ":@rhinestone/=node_modules/@rhinestone/",
    ":@safe-global/=node_modules/@safe-global/",
    ":@zerodev/=node_modules/@zerodev/",
    ":ExcessivelySafeCall/=node_modules/erc7739-validator-base/node_modules/excessively-safe-call/src/",
    ":account-abstraction-v0.6/=node_modules/account-abstraction-v0.6/",
    ":account-abstraction/=node_modules/account-abstraction/contracts/",
    ":ds-test/=node_modules/ds-test/",
    ":enumerableset4337/=node_modules/erc7739-validator-base/node_modules/@erc7579/enumerablemap4337/src/",
    ":erc4337-validation/=node_modules/erc7739-validator-base/node_modules/@rhinestone/erc4337-validation/src/",
    ":erc7579/=node_modules/erc7579/",
    ":erc7739-validator-base/=node_modules/erc7739-validator-base/",
    ":erc7739Validator/=node_modules/erc7739-validator-base/src/",
    ":excessively-safe-call/=node_modules/excessively-safe-call/",
    ":forge-std/=lib/forge-std/src/",
    ":hardhat-deploy/=node_modules/hardhat-deploy/",
    ":hardhat/=node_modules/hardhat/",
    ":kernel/=node_modules/erc7739-validator-base/node_modules/@zerodev/kernel/src/",
    ":module-bases/=node_modules/erc7739-validator-base/node_modules/@rhinestone/module-bases/src/",
    ":modulekit/=node_modules/erc7739-validator-base/node_modules/@rhinestone/modulekit/src/",
    ":openzeppelin/=node_modules/@openzeppelin/contracts/",
    ":safe7579/=node_modules/erc7739-validator-base/node_modules/@rhinestone/safe7579/src/",
    ":sentinellist/=node_modules/erc7739-validator-base/node_modules/@rhinestone/sentinellist/src/",
    ":solady/=node_modules/solady/src/",
    ":solarray/=node_modules/solarray/"
  ]
}