// File: contracts/openzeppelin-solidity/token/ERC20/IERC20.sol

pragma solidity ^0.5.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP. Does not include
 * the optional functions; to access them see `ERC20Detailed`.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a `Transfer` event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through `transferFrom`. This is
     * zero by default.
     *
     * This value changes when `approve` or `transferFrom` are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * > Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an `Approval` event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a `Transfer` event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to `approve`. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: contracts/openzeppelin-solidity/math/SafeMath.sol

pragma solidity ^0.5.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}

// File: contracts/openzeppelin-solidity/utils/Address.sol

pragma solidity ^0.5.0;

/**
 * @dev Collection of functions related to the address type,
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * This test is non-exhaustive, and there may be false-negatives: during the
     * execution of a contract's constructor, its address will be reported as
     * not containing a contract.
     *
     * > It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
}

// File: contracts/openzeppelin-solidity/token/ERC20/SafeERC20.sol

pragma solidity ^0.5.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves.

        // A Solidity high level call has three parts:
        //  1. The target address is checked to verify it contains contract code
        //  2. The call itself is made, and success asserted
        //  3. The return value is decoded, which in turn checks the size of the returned data.
        // solhint-disable-next-line max-line-length
        require(address(token).isContract(), "SafeERC20: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(data);
        require(success, "SafeERC20: low-level call failed");

        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: contracts/openzeppelin-solidity/utils/ReentrancyGuard.sol

pragma solidity ^0.5.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the `nonReentrant` modifier
 * available, which can be aplied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 */
contract ReentrancyGuard {
    /// @dev counter to allow mutex lock with only one SSTORE operation
    uint256 private _guardCounter;

    constructor () internal {
        // The counter starts at one to prevent changing it from zero to a non-zero
        // value, which is a more expensive operation.
        _guardCounter = 1;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call");
    }
}

// File: contracts/openzeppelin-solidity/crowdsale/Crowdsale.sol

pragma solidity ^0.5.0;





/**
 * @title Crowdsale
 * @dev Crowdsale is a base contract for managing a token crowdsale,
 * allowing investors to purchase tokens with ether. This contract implements
 * such functionality in its most fundamental form and can be extended to provide additional
 * functionality and/or custom behavior.
 * The external interface represents the basic interface for purchasing tokens, and conforms
 * the base architecture for crowdsales. It is *not* intended to be modified / overridden.
 * The internal interface conforms the extensible and modifiable surface of crowdsales. Override
 * the methods to add functionality. Consider using 'super' where appropriate to concatenate
 * behavior.
 */
contract Crowdsale is ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // The token being sold
    IERC20 private _token;

    // Address where funds are collected
    address payable private _wallet;

    // How many token units a buyer gets per wei.
    // The rate is the conversion between wei and the smallest and indivisible token unit.
    // So, if you are using a rate of 1 with a ERC20Detailed token with 3 decimals called TOK
    // 1 wei will give you 1 unit, or 0.001 TOK.
    uint256 private _rate;

    // Amount of wei raised
    uint256 private _weiRaised;

    /**
     * Event for token purchase logging
     * @param purchaser who paid for the tokens
     * @param beneficiary who got the tokens
     * @param value weis paid for purchase
     * @param amount amount of tokens purchased
     */
    event TokensPurchased(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);

    /**
     * @param rate Number of token units a buyer gets per wei
     * @dev The rate is the conversion between wei and the smallest and indivisible
     * token unit. So, if you are using a rate of 1 with a ERC20Detailed token
     * with 3 decimals called TOK, 1 wei will give you 1 unit, or 0.001 TOK.
     * @param wallet Address where collected funds will be forwarded to
     * @param token Address of the token being sold
     */
    constructor (uint256 rate, address payable wallet, IERC20 token) public {
        require(rate > 0, "Crowdsale: rate is 0");
        require(wallet != address(0), "Crowdsale: wallet is the zero address");
        require(address(token) != address(0), "Crowdsale: token is the zero address");

        _rate = rate;
        _wallet = wallet;
        _token = token;
    }

    /**
     * @dev fallback function ***DO NOT OVERRIDE***
     * Note that other contracts will transfer funds with a base gas stipend
     * of 2300, which is not enough to call buyTokens. Consider calling
     * buyTokens directly when purchasing tokens from a contract.
     */
    function () external payable {
        buyTokens(msg.sender);
    }

    /**
     * @return the token being sold.
     */
    function token() public view returns (IERC20) {
        return _token;
    }

    /**
     * @return the address where funds are collected.
     */
    function wallet() public view returns (address payable) {
        return _wallet;
    }

    /**
     * @return the number of token units a buyer gets per wei.
     */
    function rate() public view returns (uint256) {
        return _rate;
    }

    /**
     * @return the amount of wei raised.
     */
    function weiRaised() public view returns (uint256) {
        return _weiRaised;
    }

    /**
     * @notice This is modified to update purchase amount.
     * @dev low level token purchase ***DO NOT OVERRIDE***
     * This function has a non-reentrancy guard, so it shouldn't be called by
     * another `nonReentrant` function.
     * @param beneficiary Recipient of the token purchase
     */
    function buyTokens(address beneficiary) public nonReentrant payable {
        uint256 weiAmount = msg.value;

        // adjust weiAmount with respect to cap and individual cap.
        weiAmount = _updatePurchaseAmount(beneficiary, weiAmount);

        _preValidatePurchase(beneficiary, weiAmount);

        // calculate token amount to be created
        uint256 tokens = _getTokenAmount(weiAmount);

        // update state
        _weiRaised = _weiRaised.add(weiAmount);

        _processPurchase(beneficiary, tokens);
        emit TokensPurchased(msg.sender, beneficiary, weiAmount, tokens);

        _updatePurchasingState(beneficiary, weiAmount);

        _forwardFunds(weiAmount);
        _postValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Update of an incoming purchase amount.
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _updatePurchaseAmount(address beneficiary, uint weiAmount) internal returns (uint) {
        return weiAmount;
    }


    /**
     * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met.
     * Use `super` in contracts that inherit from Crowdsale to extend their validations.
     * Example from CappedCrowdsale.sol's _preValidatePurchase method:
     *     super._preValidatePurchase(beneficiary, weiAmount);
     *     require(weiRaised().add(weiAmount) <= cap);
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        require(beneficiary != address(0), "Crowdsale: beneficiary is the zero address");
        require(weiAmount != 0, "Crowdsale: weiAmount is 0");
    }

    /**
     * @dev Validation of an executed purchase. Observe state and use revert statements to undo rollback when valid
     * conditions are not met.
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _postValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends
     * its tokens.
     * @param beneficiary Address performing the token purchase
     * @param tokenAmount Number of tokens to be emitted
     */
    function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
        _token.safeTransfer(beneficiary, tokenAmount);
    }

    /**
     * @dev Executed when a purchase has been validated and is ready to be executed. Doesn't necessarily emit/send
     * tokens.
     * @param beneficiary Address receiving the tokens
     * @param tokenAmount Number of tokens to be purchased
     */
    function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
        _deliverTokens(beneficiary, tokenAmount);
    }

    /**
     * @dev Override for extensions that require an internal state to check for validity (current user contributions,
     * etc.)
     * @param beneficiary Address receiving the tokens
     * @param weiAmount Value in wei involved in the purchase
     */
    function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Override to extend the way in which ether is converted to tokens.
     * @param weiAmount Value in wei to be converted into tokens
     * @return Number of tokens that can be purchased with the specified _weiAmount
     */
    function _getTokenAmount(uint256 weiAmount) internal view returns (uint256) {
        return weiAmount.mul(_rate);
    }

    /**
     * @dev Determines how ETH is stored/forwarded on purchases.
     */
    function _forwardFunds(uint256 amount) internal {
        _wallet.transfer(amount);
    }
}

// File: contracts/openzeppelin-solidity/access/Roles.sol

pragma solidity ^0.5.0;

/**
 * @title Roles
 * @dev Library for managing addresses assigned to a Role.
 */
library Roles {
    struct Role {
        mapping (address => bool) bearer;
    }

    /**
     * @dev Give an account access to this role.
     */
    function add(Role storage role, address account) internal {
        require(!has(role, account), "Roles: account already has role");
        role.bearer[account] = true;
    }

    /**
     * @dev Remove an account's access to this role.
     */
    function remove(Role storage role, address account) internal {
        require(has(role, account), "Roles: account does not have role");
        role.bearer[account] = false;
    }

    /**
     * @dev Check if an account has this role.
     * @return bool
     */
    function has(Role storage role, address account) internal view returns (bool) {
        require(account != address(0), "Roles: account is the zero address");
        return role.bearer[account];
    }
}

// File: contracts/openzeppelin-solidity/access/roles/CapperRole.sol

pragma solidity ^0.5.0;


contract CapperRole {
    using Roles for Roles.Role;

    event CapperAdded(address indexed account);
    event CapperRemoved(address indexed account);

    Roles.Role private _cappers;

    constructor () internal {
        _addCapper(msg.sender);
    }

    modifier onlyCapper() {
        require(isCapper(msg.sender), "CapperRole: caller does not have the Capper role");
        _;
    }

    function isCapper(address account) public view returns (bool) {
        return _cappers.has(account);
    }

    function addCapper(address account) public onlyCapper {
        _addCapper(account);
    }

    function renounceCapper() public {
        _removeCapper(msg.sender);
    }

    function _addCapper(address account) internal {
        _cappers.add(account);
        emit CapperAdded(account);
    }

    function _removeCapper(address account) internal {
        _cappers.remove(account);
        emit CapperRemoved(account);
    }
}

// File: contracts/ds/ds-math.sol

// https://github.com/dapphub/ds-math/blob/master/src/math.sol
/// math.sol -- mixin for inline numerical wizardry

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity >0.4.13;

contract DSMath {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, "ds-math-add-overflow");
    }
    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, "ds-math-sub-underflow");
    }
    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, "ds-math-mul-overflow");
    }

    function min(uint x, uint y) internal pure returns (uint z) {
        return x <= y ? x : y;
    }
    function max(uint x, uint y) internal pure returns (uint z) {
        return x >= y ? x : y;
    }
    function imin(int x, int y) internal pure returns (int z) {
        return x <= y ? x : y;
    }
    function imax(int x, int y) internal pure returns (int z) {
        return x >= y ? x : y;
    }

    uint constant WAD = 10 ** 18;
    uint constant RAY = 10 ** 27;

    function wmul(uint x, uint y) internal pure returns (uint z) {
        z = add(mul(x, y), WAD / 2) / WAD;
    }
    function rmul(uint x, uint y) internal pure returns (uint z) {
        z = add(mul(x, y), RAY / 2) / RAY;
    }
    function wdiv(uint x, uint y) internal pure returns (uint z) {
        z = add(mul(x, WAD), y / 2) / y;
    }
    function rdiv(uint x, uint y) internal pure returns (uint z) {
        z = add(mul(x, RAY), y / 2) / y;
    }

    // This famous algorithm is called "exponentiation by squaring"
    // and calculates x^n with x as fixed-point and n as regular unsigned.
    //
    // It's O(log n), instead of O(n) for naive repeated multiplication.
    //
    // These facts are why it works:
    //
    //  If n is even, then x^n = (x^2)^(n/2).
    //  If n is odd,  then x^n = x * x^(n-1),
    //   and applying the equation for even x gives
    //    x^n = x * (x^2)^((n-1) / 2).
    //
    //  Also, EVM division is flooring and
    //    floor[(n-1) / 2] = floor[n / 2].
    //
    function rpow(uint x, uint n) internal pure returns (uint z) {
        z = n % 2 != 0 ? x : RAY;

        for (n /= 2; n != 0; n /= 2) {
            x = rmul(x, x);

            if (n % 2 != 0) {
                z = rmul(z, x);
            }
        }
    }
}

// File: contracts/openzeppelin-solidity/crowdsale/validation/IndividuallyPricedCrowdsale.sol

pragma solidity ^0.5.0;

// import "../../math/SafeMath.sol";




/**
 * @title IndividuallyPricedCrowdsale
 * @dev Crowdsale with per-purchaser prices.
 */
contract IndividuallyPricedCrowdsale is Crowdsale, CapperRole, DSMath {
    // using SafeMath for uint256;

    // _prices should be a RAY value.
    mapping(address => uint256) private _prices;

    event PriceSet(address indexed purchaser, uint256 price);

    /**
     * @dev Sets a specific purchaser's price parameters.
     * @param purchaser Address to be priced
     * @param price Price value in RAY
     */
    function setPrice(address purchaser, uint256 price) public onlyCapper {
        require(_prices[purchaser] == 0, "IndividuallyPricedCrowdsale: price was already set");
        require(price != 0, "IndividuallyPricedCrowdsale: price cannot be zero");

        _prices[purchaser] = price;

        emit PriceSet(purchaser, price);
    }

    function getPrice(address purchaser) public view returns (uint256) {
        return _prices[purchaser];
    }

    /**
     * @dev Validation of purchase.
     * @param beneficiary Address whose cap is to be checked
     * @param weiAmount Value in wei to be converted into tokens
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        // solhint-disable-next-line max-line-length
        require(_prices[msg.sender] != 0, "IndividuallyPricedCrowdsale: the price of purchaser must be set");

        super._preValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Calculate the amount of tokens, given numerator and denominator for the purchaser.
     * @param weiAmount Value in wei to be converted into tokens
     * @return Number of tokens that can be purchased with the specified _weiAmount
     */
    function _getTokenAmount(uint256 weiAmount) internal view returns (uint256) {
        uint256 price = _prices[msg.sender];
        uint256 pricedWeiAmount = wmul(price, weiAmount);
        // uint256 pricedWeiAmount = ray2wad(rmul(price, wad2ray(weiAmount)));
        return super._getTokenAmount(pricedWeiAmount);
    }
}

// File: contracts/openzeppelin-solidity/crowdsale/validation/CappedCrowdsale.sol

pragma solidity ^0.5.0;



/**
 * @title CappedCrowdsale
 * @dev Crowdsale with a limit for total contributions.
 */
contract CappedCrowdsale is Crowdsale {
    using SafeMath for uint256;

    uint256 private _cap;

    /**
     * @dev Constructor, takes maximum amount of wei accepted in the crowdsale.
     * @param cap Max amount of wei to be contributed
     */
    constructor (uint256 cap) public {
        require(cap > 0, "CappedCrowdsale: cap is 0");
        _cap = cap;
    }

    /**
     * @return the cap of the crowdsale.
     */
    function cap() public view returns (uint256) {
        return _cap;
    }

    /**
     * @dev Checks whether the cap has been reached.
     * @return Whether the cap was reached
     */
    function capReached() public view returns (bool) {
        return weiRaised() >= _cap;
    }

    /**
     * @dev Extend parent behavior requiring purchase to respect the funding cap.
     * @param beneficiary Token purchaser
     * @param weiAmount Amount of wei contributed
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        super._preValidatePurchase(beneficiary, weiAmount);
        require(weiRaised().add(weiAmount) <= _cap, "CappedCrowdsale: cap exceeded");
    }
}

// File: contracts/openzeppelin-solidity/crowdsale/validation/IndividuallyCappedCrowdsale.sol

pragma solidity ^0.5.0;




/**
 * @title IndividuallyCappedCrowdsale
 * @dev Crowdsale with per-beneficiary caps.
 */
contract IndividuallyCappedCrowdsale is Crowdsale, CapperRole {
    using SafeMath for uint256;

    mapping(address => uint256) private _contributions;
    mapping(address => uint256) private _caps;

    event CapSet(address indexed beneficiary, uint256 cap);

    /**
     * @dev Sets a specific beneficiary's maximum contribution.
     * @param beneficiary Address to be capped
     * @param cap Wei limit for individual contribution
     */
    function setCap(address beneficiary, uint256 cap) public onlyCapper {
        _caps[beneficiary] = cap;
        emit CapSet(beneficiary, cap);
    }

    /**
     * @dev Returns the cap of a specific beneficiary.
     * @param beneficiary Address whose cap is to be checked
     * @return Current cap for individual beneficiary
     */
    function getCap(address beneficiary) public view returns (uint256) {
        return _caps[beneficiary];
    }

    /**
     * @dev Returns the amount contributed so far by a specific beneficiary.
     * @param beneficiary Address of contributor
     * @return Beneficiary contribution so far
     */
    function getContribution(address beneficiary) public view returns (uint256) {
        return _contributions[beneficiary];
    }

    /**
     * @dev Extend parent behavior requiring purchase to respect the beneficiary's funding cap.
     * @param beneficiary Token purchaser
     * @param weiAmount Amount of wei contributed
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        super._preValidatePurchase(beneficiary, weiAmount);
        // solhint-disable-next-line max-line-length
        require(_contributions[beneficiary].add(weiAmount) <= _caps[beneficiary], "IndividuallyCappedCrowdsale: beneficiary's cap exceeded");
    }

    /**
     * @dev Extend parent behavior to update beneficiary contributions.
     * @param beneficiary Token purchaser
     * @param weiAmount Amount of wei contributed
     */
    function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal {
        super._updatePurchasingState(beneficiary, weiAmount);
        _contributions[beneficiary] = _contributions[beneficiary].add(weiAmount);
    }
}

// File: contracts/openzeppelin-solidity/access/roles/WhitelistAdminRole.sol

pragma solidity ^0.5.0;


/**
 * @title WhitelistAdminRole
 * @dev WhitelistAdmins are responsible for assigning and removing Whitelisted accounts.
 */
contract WhitelistAdminRole {
    using Roles for Roles.Role;

    event WhitelistAdminAdded(address indexed account);
    event WhitelistAdminRemoved(address indexed account);

    Roles.Role private _whitelistAdmins;

    constructor () internal {
        _addWhitelistAdmin(msg.sender);
    }

    modifier onlyWhitelistAdmin() {
        require(isWhitelistAdmin(msg.sender), "WhitelistAdminRole: caller does not have the WhitelistAdmin role");
        _;
    }

    function isWhitelistAdmin(address account) public view returns (bool) {
        return _whitelistAdmins.has(account);
    }

    function addWhitelistAdmin(address account) public onlyWhitelistAdmin {
        _addWhitelistAdmin(account);
    }

    function renounceWhitelistAdmin() public {
        _removeWhitelistAdmin(msg.sender);
    }

    function _addWhitelistAdmin(address account) internal {
        _whitelistAdmins.add(account);
        emit WhitelistAdminAdded(account);
    }

    function _removeWhitelistAdmin(address account) internal {
        _whitelistAdmins.remove(account);
        emit WhitelistAdminRemoved(account);
    }
}

// File: contracts/openzeppelin-solidity/access/roles/WhitelistedRole.sol

pragma solidity ^0.5.0;



/**
 * @title WhitelistedRole
 * @dev Whitelisted accounts have been approved by a WhitelistAdmin to perform certain actions (e.g. participate in a
 * crowdsale). This role is special in that the only accounts that can add it are WhitelistAdmins (who can also remove
 * it), and not Whitelisteds themselves.
 */
contract WhitelistedRole is WhitelistAdminRole {
    using Roles for Roles.Role;

    event WhitelistedAdded(address indexed account);
    event WhitelistedRemoved(address indexed account);

    Roles.Role private _whitelisteds;

    modifier onlyWhitelisted() {
        require(isWhitelisted(msg.sender), "WhitelistedRole: caller does not have the Whitelisted role");
        _;
    }

    function isWhitelisted(address account) public view returns (bool) {
        return _whitelisteds.has(account);
    }

    function addWhitelisted(address account) public onlyWhitelistAdmin {
        _addWhitelisted(account);
    }

    function removeWhitelisted(address account) public onlyWhitelistAdmin {
        _removeWhitelisted(account);
    }

    function renounceWhitelisted() public {
        _removeWhitelisted(msg.sender);
    }

    function _addWhitelisted(address account) internal {
        _whitelisteds.add(account);
        emit WhitelistedAdded(account);
    }

    function _removeWhitelisted(address account) internal {
        _whitelisteds.remove(account);
        emit WhitelistedRemoved(account);
    }
}

// File: contracts/openzeppelin-solidity/crowdsale/validation/WhitelistCrowdsale.sol

pragma solidity ^0.5.0;




/**
 * @title WhitelistCrowdsale
 * @dev Crowdsale in which only whitelisted users can contribute.
 */
contract WhitelistCrowdsale is WhitelistedRole, Crowdsale {
    /**
     * @dev Extend parent behavior requiring beneficiary to be whitelisted. Note that no
     * restriction is imposed on the account sending the transaction.
     * @param _beneficiary Token beneficiary
     * @param _weiAmount Amount of wei contributed
     */
    function _preValidatePurchase(address _beneficiary, uint256 _weiAmount) internal view {
        require(isWhitelisted(_beneficiary), "WhitelistCrowdsale: beneficiary doesn't have the Whitelisted role");
        super._preValidatePurchase(_beneficiary, _weiAmount);
    }
}

// File: contracts/Privatesale.sol

pragma solidity ^0.5.0;






contract Privatesale is WhitelistCrowdsale, IndividuallyCappedCrowdsale, IndividuallyPricedCrowdsale {
    uint256 public smallPayment = 3e16; // 0.03 ether

    constructor (address payable wallet, IERC20 token)
        public
        Crowdsale(1, wallet, token)
    {}

    function setCapAndPrice(
        address purchaser,
        uint256 cap,
        uint256 price
    ) public {
        addWhitelisted(purchaser);
        setCap(purchaser, cap);
        setPrice(purchaser, price);
    }

    /**
     * @dev Only accept payment if wei amount is equal to 0.03 ether or the purchaser cap
     * @param beneficiary Token purchaser
     * @param weiAmount Amount of wei contributed
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        super._preValidatePurchase(beneficiary, weiAmount);

        require(msg.sender == beneficiary, "Privatesale: beneficiary must be msg sender");

        uint256 amount = getContribution(beneficiary).add(weiAmount);
        require(amount == smallPayment || amount == getCap(beneficiary), "Privatesale: wei amount should be equal to purchaser cap or equal to 0.03 ether");

    }
}

{
  "compilationTarget": {
    "Privatesale.sol": "Privatesale"
  },
  "evmVersion": "petersburg",
  "libraries": {},
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}