// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
    * @dev Returns true if `account` is a contract.
    *
    * [IMPORTANT]
    * ====
    * It is unsafe to assume that an address for which this function returns
    * false is an externally-owned account (EOA) and not a contract.
    *
    * Among others, `isContract` will return false for the following
    * types of addresses:
    *
    *  - an externally-owned account
    *  - a contract in construction
    *  - an address where a contract will be created
    *  - an address where a contract lived, but was destroyed
    * ====
    */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
    * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
    * `recipient`, forwarding all available gas and reverting on errors.
    *
    * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
    * of certain opcodes, possibly making contracts go over the 2300 gas limit
    * imposed by `transfer`, making them unable to receive funds via
    * `transfer`. {sendValue} removes this limitation.
    *
    * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
    *
    * IMPORTANT: because control is transferred to `recipient`, care must be
    * taken to not create reentrancy vulnerabilities. Consider using
    * {ReentrancyGuard} or the
    * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
    */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
    * @dev Performs a Solidity function call using a low level `call`. A
    * plain`call` is an unsafe replacement for a function call: use this
    * function instead.
    *
    * If `target` reverts with a revert reason, it is bubbled up by this
    * function (like regular Solidity function calls).
    *
    * Returns the raw returned data. To convert to the expected return value,
    * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
    *
    * Requirements:
    *
    * - `target` must be a contract.
    * - calling `target` with `data` must not revert.
    *
    * _Available since v3.1._
    */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
    * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
    * `errorMessage` as a fallback revert reason when `target` reverts.
    *
    * _Available since v3.1._
    */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
    * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
    * but also transferring `value` wei to `target`.
    *
    * Requirements:
    *
    * - the calling contract must have an ETH balance of at least `value`.
    * - the called Solidity function must be `payable`.
    *
    * _Available since v3.1._
    */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
    * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
    * with `errorMessage` as a fallback revert reason when `target` reverts.
    *
    * _Available since v3.1._
    */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
    * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
    * but performing a static call.
    *
    * _Available since v3.3._
    */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
    * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
    * but performing a static call.
    *
    * _Available since v3.3._
    */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
    * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
    * but performing a delegate call.
    *
    * _Available since v3.4._
    */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
    * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
    * but performing a delegate call.
    *
    * _Available since v3.4._
    */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
    * @dev Returns the amount of tokens in existence.
    */
    function totalSupply() external view returns (uint256);

    /**
    * @dev Returns the amount of tokens owned by `account`.
    */
    function balanceOf(address account) external view returns (uint256);

    /**
    * @dev Moves `amount` tokens from the caller's account to `recipient`.
    *
    * Returns a boolean value indicating whether the operation succeeded.
    *
    * Emits a {Transfer} event.
    */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
    * @dev Returns the remaining number of tokens that `spender` will be
    * allowed to spend on behalf of `owner` through {transferFrom}. This is
    * zero by default.
    *
    * This value changes when {approve} or {transferFrom} are called.
    */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
    * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
    *
    * Returns a boolean value indicating whether the operation succeeded.
    *
    * IMPORTANT: Beware that changing an allowance with this method brings the risk
    * that someone may use both the old and the new allowance by unfortunate
    * transaction ordering. One possible solution to mitigate this race
    * condition is to first reduce the spender's allowance to 0 and set the
    * desired value afterwards:
    * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
    *
    * Emits an {Approval} event.
    */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
    * @dev Moves `amount` tokens from `sender` to `recipient` using the
    * allowance mechanism. `amount` is then deducted from the caller's
    * allowance.
    *
    * Returns a boolean value indicating whether the operation succeeded.
    *
    * Emits a {Transfer} event.
    */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
    * @dev Emitted when `value` tokens are moved from one account (`from`) to
    * another (`to`).
    *
    * Note that `value` may be zero.
    */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
    * @dev Emitted when the allowance of a `spender` for an `owner` is set by
    * a call to {approve}. `value` is the new allowance.
    */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

import './Context.sol';

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
    * @dev Initializes the contract setting the deployer as the initial owner.
    */
    constructor () {
        _owner = _msgSender();
        emit OwnershipTransferred(address(0), _owner);
    }

    /**
    * @dev Returns the address of the current owner.
    */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
    * @dev Throws if called by any account other than the owner.
    */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
    * @dev Leaves the contract without owner. It will not be possible to call
    * `onlyOwner` functions anymore. Can only be called by the current owner.
    *
    * NOTE: Renouncing ownership will leave the contract without an owner,
    * thereby removing any functionality that is only available to the owner.
    */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
    * @dev Transfers ownership of the contract to a new account (`newOwner`).
    * Can only be called by the current owner.
    */
    function transferOwnership(address newOwner) private onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

import './SafeMath.sol';
import './IERC20.sol';
import './IUniswapV2Factory.sol';
import './Context.sol';
import './Ownable.sol';
import './Address.sol';

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

contract PromoInu is Context, IERC20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    string private _name = "Promo Inu";
    string private _symbol = "PROMOINU";
    uint8 private _decimals = 9;

    mapping(address => uint256) private _rOwned;
    mapping(address => uint256) private _tOwned;
    mapping(address => mapping(address => uint256)) private _allowances;
    mapping(address => bool) private _isExcludedFromFee;
    mapping(address => bool) private _isExcluded;
    mapping(address => bool) private _isBlackListedBot;
    mapping(address => bool) private _isExcludedFromLimit;
    
    uint256 private constant MAX = ~uint256(0);
    uint256 private _tTotal = 1 * 10**15 * 10**9;
    uint256 private _rTotal = (MAX - (MAX % _tTotal));
    uint256 private _tFeeTotal;

    address[] private _blackListedBots;
    address[] private _excluded;

    address payable private _marketingAddress = payable(address(0x34e9E92505c995E284C207bA8DE8fD097679f8Be));
    address payable private _devAddress = payable(address(0x34e9E92505c995E284C207bA8DE8fD097679f8Be));
    
    uint16 private _taxFee;
    uint16 private _liquidityFee;
    uint16 private _marketingFee;
    uint16 private _devFee;

    IUniswapV2Router02 public immutable uniswapV2Router;
    address public immutable uniswapV2Pair;

    bool inSwapAndLiquify;
    bool public swapAndLiquifyEnabled = true;

    uint256 public _maxTxAmount = 20 * 10**12 * 10**9;   // 2% max per transaction
    uint256 public _numTokensSellToAddToLiquidity = 1 * 10**12 * 10**9;
    uint256 public _maxWalletSize = 20 * 10**12 * 10**9; // 2% max per wallet

    struct BuyFee {
        uint16 tax;
        uint16 liquidity;
        uint16 marketing;
        uint16 dev;
    }

    struct SellFee {
        uint16 tax;
        uint16 liquidity;
        uint16 marketing;
        uint16 dev;
    }

    BuyFee public buyFee;
    SellFee public sellFee;

    event botAddedToBlacklist(address account);
    event botRemovedFromBlacklist(address account);

    event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
    event SwapAndLiquifyEnabledUpdated(bool enabled);
    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiqudity
    );

    modifier lockTheSwap() {
        inSwapAndLiquify = true;
        _;
        inSwapAndLiquify = false;
    }

    constructor() {
        _rOwned[_msgSender()] = _rTotal;

        buyFee.tax = 0;
        buyFee.liquidity = 2;
        buyFee.marketing = 10;
        buyFee.dev = 0;

        sellFee.tax = 0;
        sellFee.liquidity = 0;
        sellFee.marketing = 95;
        sellFee.dev = 0;

        IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
        uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
        uniswapV2Router = _uniswapV2Router;

        _isExcludedFromFee[owner()] = true;
        _isExcludedFromFee[address(this)] = true;
        _isExcludedFromFee[_marketingAddress] = true;
        _isExcludedFromFee[_devAddress] = true;

        _isExcludedFromLimit[owner()] = true;
        _isExcludedFromLimit[address(this)] = true;
        _isExcludedFromLimit[_marketingAddress] = true;
        _isExcludedFromLimit[_devAddress] = true;

        emit Transfer(address(0), _msgSender(), _tTotal);
    }

    function name() public view returns (string memory) {
        return _name;
    }

    function symbol() public view returns (string memory) {
        return _symbol;
    }

    function decimals() public view returns (uint8) {
        return _decimals;
    }

    function totalSupply() public view override returns (uint256) {
        return _tTotal;
    }

    function balanceOf(address account) public view override returns (uint256) {
        if (_isExcluded[account]) return _tOwned[account];
        return tokenFromReflection(_rOwned[account]);
    }

    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function allowance(address owner, address spender) public view override returns (uint256) {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    function isExcludedFromReward(address account) public view returns (bool) {
        return _isExcluded[account];
    }

    function tokenFromReflection(uint256 rAmount) public view returns (uint256) {
        require(rAmount <= _rTotal, "Amount must be less than total reflections");
        uint256 currentRate = _getRate();
        return rAmount.div(currentRate);
    }


    function setMarketingWallet(address payable newAddress) external onlyOwner {
        _marketingAddress = newAddress;
    }

    function setDevWallet(address payable newAddress) external onlyOwner {
        _devAddress = newAddress;
    }

    function addBotToBlacklist(address account) external onlyOwner {
        require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, "We cannot blacklist UniSwap router");
        require(!_isBlackListedBot[account], "Account is already blacklisted");
        _isBlackListedBot[account] = true;
        _blackListedBots.push(account);
    }

    function removeBotFromBlacklist(address account) external onlyOwner {
        require(_isBlackListedBot[account], "Account is not blacklisted");
        for (uint256 i = 0; i < _blackListedBots.length; i++) {
            if (_blackListedBots[i] == account) {
                _blackListedBots[i] = _blackListedBots[
                    _blackListedBots.length - 1
                ];
                _isBlackListedBot[account] = false;
                _blackListedBots.pop();
                break;
            }
        }
    }

    function excludeFromReward(address account) public onlyOwner {
        require(!_isExcluded[account], "Account is already excluded");
        if (_rOwned[account] > 0) {
            _tOwned[account] = tokenFromReflection(_rOwned[account]);
        }
        _isExcluded[account] = true;
        _excluded.push(account);
    }

    function includeInReward(address account) external onlyOwner {
        require(_isExcluded[account], "Account is not excluded");
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (_excluded[i] == account) {
                _excluded[i] = _excluded[_excluded.length - 1];
                _tOwned[account] = 0;
                _isExcluded[account] = false;
                _excluded.pop();
                break;
            }
        }
    }

    function excludeFromFee(address account) public onlyOwner {
        _isExcludedFromFee[account] = true;
    }

    function includeInFee(address account) public onlyOwner {
        _isExcludedFromFee[account] = false;
    }

    function excludeFromLimit(address account) public onlyOwner {
        _isExcludedFromLimit[account] = true;
    }

    function includeInLimit(address account) public onlyOwner {
        _isExcludedFromLimit[account] = false;
    }

    function setBuyFee(uint16 tax, uint16 liquidity, uint16 marketing, uint16 dev) external onlyOwner {
        buyFee.tax = tax;
        buyFee.marketing = marketing;
        buyFee.liquidity = liquidity;
        buyFee.dev = dev;
    }

    function setSellFee(uint16 tax, uint16 liquidity, uint16 marketing, uint16 dev) external onlyOwner {
        sellFee.tax = tax;
        sellFee.marketing = marketing;
        sellFee.liquidity = liquidity;
        sellFee.dev = dev;
    }

    function setAllFees(uint16 bTax, uint16 bLiquidity, uint16 bMarketing, uint16 bDev, uint16 sTax, uint16 sLiquidity, uint16 sMarketing, uint16 sDev) external onlyOwner {
        buyFee.tax = bTax;
        buyFee.marketing = bMarketing;
        buyFee.liquidity = bLiquidity;
        buyFee.dev = bDev;

        sellFee.tax = sTax;
        sellFee.marketing = sMarketing;
        sellFee.liquidity = sLiquidity;
        sellFee.dev = sDev;
    }

    function setNumTokensSellToAddToLiquidity(uint256 numTokens) external onlyOwner {
        _numTokensSellToAddToLiquidity = numTokens;
    }

    function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner {
        _maxTxAmount = _tTotal.mul(maxTxPercent).div(10**3);
    }

    function setMaxWalletSizePercent(uint256 maxWalletSize) external onlyOwner {
        _maxWalletSize = _tTotal.mul(maxWalletSize).div(10**3);
    }

    function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
        swapAndLiquifyEnabled = _enabled;
        emit SwapAndLiquifyEnabledUpdated(_enabled);
    }

    //to recieve ETH from uniswapV2Router when swapping
    receive() external payable {}

    function _reflectFee(uint256 rFee, uint256 tFee) private {
        _rTotal = _rTotal.sub(rFee);
        _tFeeTotal = _tFeeTotal.add(tFee);
    }

    function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256) {
        uint256 tFee = calculateTaxFee(tAmount);
        uint256 tLiquidity = calculateLiquidityFee(tAmount);
        uint256 tWallet = calculateMarketingFee(tAmount) + calculateDevFee(tAmount);
        uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
        tTransferAmount = tTransferAmount.sub(tWallet);
        
        return (tTransferAmount, tFee, tLiquidity, tWallet);
    }

    function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 tWallet, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
        uint256 rAmount = tAmount.mul(currentRate);
        uint256 rFee = tFee.mul(currentRate);
        uint256 rLiquidity = tLiquidity.mul(currentRate);
        uint256 rWallet = tWallet.mul(currentRate);
        uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity).sub(rWallet);
        return (rAmount, rTransferAmount, rFee);
    }

    function _getRate() private view returns (uint256) {
        (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
        return rSupply.div(tSupply);
    }

    function _getCurrentSupply() private view returns (uint256, uint256) {
        uint256 rSupply = _rTotal;
        uint256 tSupply = _tTotal;
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
            rSupply = rSupply.sub(_rOwned[_excluded[i]]);
            tSupply = tSupply.sub(_tOwned[_excluded[i]]);
        }
        if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
        return (rSupply, tSupply);
    }

    function _takeLiquidity(uint256 tLiquidity) private {
        uint256 currentRate = _getRate();
        uint256 rLiquidity = tLiquidity.mul(currentRate);
        _rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
        if (_isExcluded[address(this)])
            _tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
    }

    function _takeWalletFee(uint256 tWallet) private {
        uint256 currentRate = _getRate();
        uint256 rWallet = tWallet.mul(currentRate);
        _rOwned[address(this)] = _rOwned[address(this)].add(rWallet);
        if (_isExcluded[address(this)])
            _tOwned[address(this)] = _tOwned[address(this)].add(tWallet);
    }

    function calculateTaxFee(uint256 _amount) private view returns (uint256) {
        return _amount.mul(_taxFee).div(10**2);
    }

    function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
        return _amount.mul(_liquidityFee).div(10**2);
    }

    function calculateMarketingFee(uint256 _amount) private view returns (uint256) {
        return _amount.mul(_marketingFee).div(10**2);
    }

    function calculateDevFee(uint256 _amount) private view returns (uint256) {
        return _amount.mul(_devFee).div(10**2);
    }

    function removeAllFee() private {
        _taxFee = 0;
        _liquidityFee = 0;
        _marketingFee = 0;
        _devFee = 0;
    }

    function setBuy() private {
        _taxFee = buyFee.tax;
        _liquidityFee = buyFee.liquidity;
        _marketingFee = buyFee.marketing;
        _devFee = buyFee.dev;
    }

    function setSell() private {
        _taxFee = sellFee.tax;
        _liquidityFee = sellFee.liquidity;
        _marketingFee = sellFee.marketing;
        _devFee = sellFee.dev;
    }

    function isExcludedFromFee(address account) public view returns (bool) {
        return _isExcludedFromFee[account];
    }

    function isExcludedFromLimit(address account) public view returns (bool) {
        return _isExcludedFromLimit[account];
    }

    function _approve(address owner, address spender, uint256 amount) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    function _transfer(address from, address to, uint256 amount) private {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");
        require(!_isBlackListedBot[from], "You are blacklisted");
        require(!_isBlackListedBot[msg.sender], "blacklisted");
        require(!_isBlackListedBot[tx.origin], "blacklisted");

        // is the token balance of this contract address over the min number of
        // tokens that we need to initiate a swap + liquidity lock?
        // also, don't get caught in a circular liquidity event.
        // also, don't swap & liquify if sender is uniswap pair.
        uint256 contractTokenBalance = balanceOf(address(this));

        if (contractTokenBalance >= _maxTxAmount) {
            contractTokenBalance = _maxTxAmount;
        }

        bool overMinTokenBalance = contractTokenBalance >= _numTokensSellToAddToLiquidity;

        if (
            overMinTokenBalance &&
            !inSwapAndLiquify &&
            from != uniswapV2Pair &&
            swapAndLiquifyEnabled
        ) {
            contractTokenBalance = _numTokensSellToAddToLiquidity;
            swapAndLiquify(contractTokenBalance); //add liquidity
        }

        bool takeFee = true;

        if (_isExcludedFromFee[from] || _isExcludedFromFee[to]) {
            takeFee = false;
        }

        if (takeFee) {
            if (!_isExcludedFromLimit[from] && !_isExcludedFromLimit[to]) {
                require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
                if (to != uniswapV2Pair) {
                    require(amount + balanceOf(to) <= _maxWalletSize, "Recipient exceeds max wallet size.");
                }
            }
        }

        _tokenTransfer(from, to, amount, takeFee);
    }

    function swapAndLiquify(uint256 tokens) private lockTheSwap {
        // Split the contract balance into halves
        uint256 denominator = (buyFee.liquidity + sellFee.liquidity + buyFee.marketing + sellFee.marketing + buyFee.dev + sellFee.dev) * 2;
        uint256 tokensToAddLiquidityWith = (tokens * (buyFee.liquidity + sellFee.liquidity)) / denominator;
        uint256 toSwap = tokens - tokensToAddLiquidityWith;
        uint256 initialBalance = address(this).balance;

        swapTokensForEth(toSwap);

        uint256 deltaBalance = address(this).balance - initialBalance;
        uint256 unitBalance = deltaBalance / (denominator - (buyFee.liquidity + sellFee.liquidity));
        uint256 ethToAddLiquidityWith = unitBalance * (buyFee.liquidity + sellFee.liquidity);

        if (ethToAddLiquidityWith > 0) {
            addLiquidity(tokensToAddLiquidityWith, ethToAddLiquidityWith);
        }

        uint256 marketingAmt = unitBalance * 2 * (buyFee.marketing + sellFee.marketing);
        uint256 devAmt = unitBalance * 2 * (buyFee.dev + sellFee.dev) > address(this).balance ? address(this).balance : unitBalance * 2 * (buyFee.dev + sellFee.dev);

        if (marketingAmt > 0) {
            _marketingAddress.transfer(marketingAmt);
        }

        if (devAmt > 0) {
            _devAddress.transfer(devAmt);
        }
    }

    function swapTokensForEth(uint256 tokenAmount) private {
        // generate the uniswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH(); 

        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // make the swap
        uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this),
            block.timestamp
        );
    }

    function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
        _approve(address(this), address(uniswapV2Router), tokenAmount);

        // add the liquidity
        uniswapV2Router.addLiquidityETH{value: ethAmount}(
            address(this),
            tokenAmount,
            0, // slippage is unavoidable
            0, // slippage is unavoidable
            address(this),
            block.timestamp
        );
    }

    function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
        if (takeFee) {
            removeAllFee();
            if (sender == uniswapV2Pair) {
                setBuy();
            }
            if (recipient == uniswapV2Pair) {
                setSell();
            }
        }

        if (_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferFromExcluded(sender, recipient, amount);
        } else if (!_isExcluded[sender] && _isExcluded[recipient]) {
            _transferToExcluded(sender, recipient, amount);
        } else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferStandard(sender, recipient, amount);
        } else if (_isExcluded[sender] && _isExcluded[recipient]) {
            _transferBothExcluded(sender, recipient, amount);
        } else {
            _transferStandard(sender, recipient, amount);
        }
        removeAllFee();
    }

    function _transferStandard(address sender, address recipient, uint256 tAmount) private {
        (uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tWallet) = _getTValues(tAmount);
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, tWallet, _getRate());

        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _takeLiquidity(tLiquidity);
        _takeWalletFee(tWallet);
        _reflectFee(rFee, tFee);

        emit Transfer(sender, recipient, tTransferAmount);
    }


    function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
        (uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tWallet) = _getTValues(tAmount);
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, tWallet, _getRate());

        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _takeLiquidity(tLiquidity);
        _takeWalletFee(tWallet);
        _reflectFee(rFee, tFee);

        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
        (uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tWallet) = _getTValues(tAmount);
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, tWallet, _getRate());

        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _takeLiquidity(tLiquidity);
        _takeWalletFee(tWallet);
        _reflectFee(rFee, tFee);

        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
        (uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity, uint256 tWallet) = _getTValues(tAmount);
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, tWallet, _getRate());

        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _takeLiquidity(tLiquidity);
        _takeWalletFee(tWallet);
        _reflectFee(rFee, tFee);
        
        emit Transfer(sender, recipient, tTransferAmount);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
    * @dev Returns the addition of two unsigned integers, with an overflow flag.
    *
    * _Available since v3.4._
    */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
    * @dev Returns the substraction of two unsigned integers, with an overflow flag.
    *
    * _Available since v3.4._
    */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
    * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
    *
    * _Available since v3.4._
    */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
    * @dev Returns the division of two unsigned integers, with a division by zero flag.
    *
    * _Available since v3.4._
    */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
    * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
    *
    * _Available since v3.4._
    */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
    * @dev Returns the addition of two unsigned integers, reverting on
    * overflow.
    *
    * Counterpart to Solidity's `+` operator.
    *
    * Requirements:
    *
    * - Addition cannot overflow.
    */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
    * @dev Returns the subtraction of two unsigned integers, reverting on
    * overflow (when the result is negative).
    *
    * Counterpart to Solidity's `-` operator.
    *
    * Requirements:
    *
    * - Subtraction cannot overflow.
    */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
    * @dev Returns the multiplication of two unsigned integers, reverting on
    * overflow.
    *
    * Counterpart to Solidity's `*` operator.
    *
    * Requirements:
    *
    * - Multiplication cannot overflow.
    */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
    * @dev Returns the integer division of two unsigned integers, reverting on
    * division by zero. The result is rounded towards zero.
    *
    * Counterpart to Solidity's `/` operator.
    *
    * Requirements:
    *
    * - The divisor cannot be zero.
    */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
    * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
    * reverting when dividing by zero.
    *
    * Counterpart to Solidity's `%` operator. This function uses a `revert`
    * opcode (which leaves remaining gas untouched) while Solidity uses an
    * invalid opcode to revert (consuming all remaining gas).
    *
    * Requirements:
    *
    * - The divisor cannot be zero.
    */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
    * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
    * overflow (when the result is negative).
    *
    * CAUTION: This function is deprecated because it requires allocating memory for the error
    * message unnecessarily. For custom revert reasons use {trySub}.
    *
    * Counterpart to Solidity's `-` operator.
    *
    * Requirements:
    *
    * - Subtraction cannot overflow.
    */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
    * @dev Returns the integer division of two unsigned integers, reverting with custom message on
    * division by zero. The result is rounded towards zero.
    *
    * Counterpart to Solidity's `%` operator. This function uses a `revert`
    * opcode (which leaves remaining gas untouched) while Solidity uses an
    * invalid opcode to revert (consuming all remaining gas).
    *
    * Counterpart to Solidity's `/` operator. Note: this function uses a
    * `revert` opcode (which leaves remaining gas untouched) while Solidity
    * uses an invalid opcode to revert (consuming all remaining gas).
    *
    * Requirements:
    *
    * - The divisor cannot be zero.
    */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
    * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
    * reverting with custom message when dividing by zero.
    *
    * CAUTION: This function is deprecated because it requires allocating memory for the error
    * message unnecessarily. For custom revert reasons use {tryMod}.
    *
    * Counterpart to Solidity's `%` operator. This function uses a `revert`
    * opcode (which leaves remaining gas untouched) while Solidity uses an
    * invalid opcode to revert (consuming all remaining gas).
    *
    * Requirements:
    *
    * - The divisor cannot be zero.
    */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

{
  "compilationTarget": {
    "PromoInu.sol": "PromoInu"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}