// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Base64.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides a set of functions to operate with Base64 strings.
 *
 * _Available since v4.5._
 */
library Base64 {
    /**
     * @dev Base64 Encoding/Decoding Table
     */
    string internal constant _TABLE = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";

    /**
     * @dev Converts a `bytes` to its Bytes64 `string` representation.
     */
    function encode(bytes memory data) internal pure returns (string memory) {
        /**
         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence
         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol
         */
        if (data.length == 0) return "";

        // Loads the table into memory
        string memory table = _TABLE;

        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter
        // and split into 4 numbers of 6 bits.
        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up
        // - `data.length + 2`  -> Round up
        // - `/ 3`              -> Number of 3-bytes chunks
        // - `4 *`              -> 4 characters for each chunk
        string memory result = new string(4 * ((data.length + 2) / 3));

        /// @solidity memory-safe-assembly
        assembly {
            // Prepare the lookup table (skip the first "length" byte)
            let tablePtr := add(table, 1)

            // Prepare result pointer, jump over length
            let resultPtr := add(result, 32)

            // Run over the input, 3 bytes at a time
            for {
                let dataPtr := data
                let endPtr := add(data, mload(data))
            } lt(dataPtr, endPtr) {

            } {
                // Advance 3 bytes
                dataPtr := add(dataPtr, 3)
                let input := mload(dataPtr)

                // To write each character, shift the 3 bytes (18 bits) chunk
                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)
                // and apply logical AND with 0x3F which is the number of
                // the previous character in the ASCII table prior to the Base64 Table
                // The result is then added to the table to get the character to write,
                // and finally write it in the result pointer but with a left shift
                // of 256 (1 byte) - 8 (1 ASCII char) = 248 bits

                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance

                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance

                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance

                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance
            }

            // When data `bytes` is not exactly 3 bytes long
            // it is padded with `=` characters at the end
            switch mod(mload(data), 3)
            case 1 {
                mstore8(sub(resultPtr, 1), 0x3d)
                mstore8(sub(resultPtr, 2), 0x3d)
            }
            case 2 {
                mstore8(sub(resultPtr, 1), 0x3d)
            }
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

/*

NOTE ON SEPOLIA:

The address 0x000000000000AAeB6D7670E522A718067333cd4E is currently broken on Sepolia,
pending OpenSea sepolia support.

A temporary workaround to get the WildNFT deploying on sepolia is to use a non-existing
address such as 0xB69c34f580d74396Daeb327D35B4fb4677353Fa9

For production, please change this to the correct address.

*/
address constant CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS = 0xB69c34f580d74396Daeb327D35B4fb4677353Fa9; //0x000000000000AAeB6D7670E522A718067333cd4E;
address constant CANONICAL_CORI_SUBSCRIPTION = 0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6;

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: GPL-3.0
// presented by Wildxyz

pragma solidity ^0.8.17;

import {Strings} from '@openzeppelin/contracts/utils/Strings.sol';
import {Base64} from '@openzeppelin/contracts/utils/Base64.sol';
import {Math} from '@openzeppelin/contracts/utils/math/Math.sol';

import {WildNFTRandom} from '../common/WildNFTRandom.sol';

contract DeathBeforeTheBloom is WildNFTRandom {
    constructor(address _minter, uint256 _maxSupply, string memory _baseURI, address[] memory _payees, uint256[] memory _shares, uint96 _feeNumerator) WildNFTRandom('Death Before the Bloom', 'DBTB', _minter, _maxSupply, _baseURI, _payees, _shares, _feeNumerator) {}

    // update 2981 royalty
    function setDefaultRoyalty(address receiver, uint96 feeNumerator) public onlyOwner {
        _setDefaultRoyalty(receiver, feeNumerator);
    }

    function tokenURI(uint256 _tokenId) public view override returns (string memory) {
        require(_exists(_tokenId), 'Token does not exist.');
        return string(abi.encodePacked(baseURI, Strings.toString(_tokenId), '.json'));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/common/ERC2981.sol)

pragma solidity ^0.8.0;

import "../../interfaces/IERC2981.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.
 *
 * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for
 * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.
 *
 * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the
 * fee is specified in basis points by default.
 *
 * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
 * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
 * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
 *
 * _Available since v4.5._
 */
abstract contract ERC2981 is IERC2981, ERC165 {
    struct RoyaltyInfo {
        address receiver;
        uint96 royaltyFraction;
    }

    RoyaltyInfo private _defaultRoyaltyInfo;
    mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @inheritdoc IERC2981
     */
    function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public view virtual override returns (address, uint256) {
        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];

        if (royalty.receiver == address(0)) {
            royalty = _defaultRoyaltyInfo;
        }

        uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();

        return (royalty.receiver, royaltyAmount);
    }

    /**
     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a
     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an
     * override.
     */
    function _feeDenominator() internal pure virtual returns (uint96) {
        return 10000;
    }

    /**
     * @dev Sets the royalty information that all ids in this contract will default to.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {
        require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
        require(receiver != address(0), "ERC2981: invalid receiver");

        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Removes default royalty information.
     */
    function _deleteDefaultRoyalty() internal virtual {
        delete _defaultRoyaltyInfo;
    }

    /**
     * @dev Sets the royalty information for a specific token id, overriding the global default.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setTokenRoyalty(
        uint256 tokenId,
        address receiver,
        uint96 feeNumerator
    ) internal virtual {
        require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
        require(receiver != address(0), "ERC2981: Invalid parameters");

        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Resets royalty information for the token id back to the global default.
     */
    function _resetTokenRoyalty(uint256 tokenId) internal virtual {
        delete _tokenRoyaltyInfo[tokenId];
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.2) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: address zero is not a valid owner");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _ownerOf(tokenId);
        require(owner != address(0), "ERC721: invalid token ID");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        _requireMinted(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not token owner or approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        _requireMinted(tokenId);

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
        _safeTransfer(from, to, tokenId, data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _ownerOf(tokenId) != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId, 1);

        // Check that tokenId was not minted by `_beforeTokenTransfer` hook
        require(!_exists(tokenId), "ERC721: token already minted");

        unchecked {
            // Will not overflow unless all 2**256 token ids are minted to the same owner.
            // Given that tokens are minted one by one, it is impossible in practice that
            // this ever happens. Might change if we allow batch minting.
            // The ERC fails to describe this case.
            _balances[to] += 1;
        }

        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);

        _afterTokenTransfer(address(0), to, tokenId, 1);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId, 1);

        // Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
        owner = ERC721.ownerOf(tokenId);

        // Clear approvals
        delete _tokenApprovals[tokenId];

        unchecked {
            // Cannot overflow, as that would require more tokens to be burned/transferred
            // out than the owner initially received through minting and transferring in.
            _balances[owner] -= 1;
        }
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);

        _afterTokenTransfer(owner, address(0), tokenId, 1);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId, 1);

        // Check that tokenId was not transferred by `_beforeTokenTransfer` hook
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");

        // Clear approvals from the previous owner
        delete _tokenApprovals[tokenId];

        unchecked {
            // `_balances[from]` cannot overflow for the same reason as described in `_burn`:
            // `from`'s balance is the number of token held, which is at least one before the current
            // transfer.
            // `_balances[to]` could overflow in the conditions described in `_mint`. That would require
            // all 2**256 token ids to be minted, which in practice is impossible.
            _balances[from] -= 1;
            _balances[to] += 1;
        }
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        _afterTokenTransfer(from, to, tokenId, 1);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` has not been minted yet.
     */
    function _requireMinted(uint256 tokenId) internal view virtual {
        require(_exists(tokenId), "ERC721: invalid token ID");
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
     * - When `from` is zero, the tokens will be minted for `to`.
     * - When `to` is zero, ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
     * - When `from` is zero, the tokens were minted for `to`.
     * - When `to` is zero, ``from``'s tokens were burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize
    ) internal virtual {}

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * WARNING: Anyone calling this MUST ensure that the balances remain consistent with the ownership. The invariant
     * being that for any address `a` the value returned by `balanceOf(a)` must be equal to the number of tokens such
     * that `ownerOf(tokenId)` is `a`.
     */
    // solhint-disable-next-line func-name-mixedcase
    function __unsafe_increaseBalance(address account, uint256 amount) internal {
        _balances[account] += amount;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

/**
 * @dev Interface for the NFT Royalty Standard.
 *
 * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
 * support for royalty payments across all NFT marketplaces and ecosystem participants.
 *
 * _Available since v4.5._
 */
interface IERC2981 is IERC165 {
    /**
     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
     */
    function royaltyInfo(uint256 tokenId, uint256 salePrice)
        external
        view
        returns (address receiver, uint256 royaltyAmount);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface IOperatorFilterRegistry {
    /**
     * @notice Returns true if operator is not filtered for a given token, either by address or codeHash. Also returns
     *         true if supplied registrant address is not registered.
     */
    function isOperatorAllowed(address registrant, address operator) external view returns (bool);

    /**
     * @notice Registers an address with the registry. May be called by address itself or by EIP-173 owner.
     */
    function register(address registrant) external;

    /**
     * @notice Registers an address with the registry and "subscribes" to another address's filtered operators and codeHashes.
     */
    function registerAndSubscribe(address registrant, address subscription) external;

    /**
     * @notice Registers an address with the registry and copies the filtered operators and codeHashes from another
     *         address without subscribing.
     */
    function registerAndCopyEntries(address registrant, address registrantToCopy) external;

    /**
     * @notice Unregisters an address with the registry and removes its subscription. May be called by address itself or by EIP-173 owner.
     *         Note that this does not remove any filtered addresses or codeHashes.
     *         Also note that any subscriptions to this registrant will still be active and follow the existing filtered addresses and codehashes.
     */
    function unregister(address addr) external;

    /**
     * @notice Update an operator address for a registered address - when filtered is true, the operator is filtered.
     */
    function updateOperator(address registrant, address operator, bool filtered) external;

    /**
     * @notice Update multiple operators for a registered address - when filtered is true, the operators will be filtered. Reverts on duplicates.
     */
    function updateOperators(address registrant, address[] calldata operators, bool filtered) external;

    /**
     * @notice Update a codeHash for a registered address - when filtered is true, the codeHash is filtered.
     */
    function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;

    /**
     * @notice Update multiple codeHashes for a registered address - when filtered is true, the codeHashes will be filtered. Reverts on duplicates.
     */
    function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;

    /**
     * @notice Subscribe an address to another registrant's filtered operators and codeHashes. Will remove previous
     *         subscription if present.
     *         Note that accounts with subscriptions may go on to subscribe to other accounts - in this case,
     *         subscriptions will not be forwarded. Instead the former subscription's existing entries will still be
     *         used.
     */
    function subscribe(address registrant, address registrantToSubscribe) external;

    /**
     * @notice Unsubscribe an address from its current subscribed registrant, and optionally copy its filtered operators and codeHashes.
     */
    function unsubscribe(address registrant, bool copyExistingEntries) external;

    /**
     * @notice Get the subscription address of a given registrant, if any.
     */
    function subscriptionOf(address addr) external returns (address registrant);

    /**
     * @notice Get the set of addresses subscribed to a given registrant.
     *         Note that order is not guaranteed as updates are made.
     */
    function subscribers(address registrant) external returns (address[] memory);

    /**
     * @notice Get the subscriber at a given index in the set of addresses subscribed to a given registrant.
     *         Note that order is not guaranteed as updates are made.
     */
    function subscriberAt(address registrant, uint256 index) external returns (address);

    /**
     * @notice Copy filtered operators and codeHashes from a different registrantToCopy to addr.
     */
    function copyEntriesOf(address registrant, address registrantToCopy) external;

    /**
     * @notice Returns true if operator is filtered by a given address or its subscription.
     */
    function isOperatorFiltered(address registrant, address operator) external returns (bool);

    /**
     * @notice Returns true if the hash of an address's code is filtered by a given address or its subscription.
     */
    function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);

    /**
     * @notice Returns true if a codeHash is filtered by a given address or its subscription.
     */
    function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);

    /**
     * @notice Returns a list of filtered operators for a given address or its subscription.
     */
    function filteredOperators(address addr) external returns (address[] memory);

    /**
     * @notice Returns the set of filtered codeHashes for a given address or its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredCodeHashes(address addr) external returns (bytes32[] memory);

    /**
     * @notice Returns the filtered operator at the given index of the set of filtered operators for a given address or
     *         its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredOperatorAt(address registrant, uint256 index) external returns (address);

    /**
     * @notice Returns the filtered codeHash at the given index of the list of filtered codeHashes for a given address or
     *         its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);

    /**
     * @notice Returns true if an address has registered
     */
    function isRegistered(address addr) external returns (bool);

    /**
     * @dev Convenience method to compute the code hash of an arbitrary contract
     */
    function codeHashOf(address addr) external returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (finance/PaymentSplitter.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/utils/SafeERC20.sol";
import "../utils/Address.sol";
import "../utils/Context.sol";

/**
 * @title PaymentSplitter
 * @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
 * that the Ether will be split in this way, since it is handled transparently by the contract.
 *
 * The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
 * account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
 * an amount proportional to the percentage of total shares they were assigned. The distribution of shares is set at the
 * time of contract deployment and can't be updated thereafter.
 *
 * `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
 * accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
 * function.
 *
 * NOTE: This contract assumes that ERC20 tokens will behave similarly to native tokens (Ether). Rebasing tokens, and
 * tokens that apply fees during transfers, are likely to not be supported as expected. If in doubt, we encourage you
 * to run tests before sending real value to this contract.
 */
contract PaymentSplitter is Context {
    event PayeeAdded(address account, uint256 shares);
    event PaymentReleased(address to, uint256 amount);
    event ERC20PaymentReleased(IERC20 indexed token, address to, uint256 amount);
    event PaymentReceived(address from, uint256 amount);

    uint256 private _totalShares;
    uint256 private _totalReleased;

    mapping(address => uint256) private _shares;
    mapping(address => uint256) private _released;
    address[] private _payees;

    mapping(IERC20 => uint256) private _erc20TotalReleased;
    mapping(IERC20 => mapping(address => uint256)) private _erc20Released;

    /**
     * @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
     * the matching position in the `shares` array.
     *
     * All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
     * duplicates in `payees`.
     */
    constructor(address[] memory payees, uint256[] memory shares_) payable {
        require(payees.length == shares_.length, "PaymentSplitter: payees and shares length mismatch");
        require(payees.length > 0, "PaymentSplitter: no payees");

        for (uint256 i = 0; i < payees.length; i++) {
            _addPayee(payees[i], shares_[i]);
        }
    }

    /**
     * @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
     * reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
     * reliability of the events, and not the actual splitting of Ether.
     *
     * To learn more about this see the Solidity documentation for
     * https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
     * functions].
     */
    receive() external payable virtual {
        emit PaymentReceived(_msgSender(), msg.value);
    }

    /**
     * @dev Getter for the total shares held by payees.
     */
    function totalShares() public view returns (uint256) {
        return _totalShares;
    }

    /**
     * @dev Getter for the total amount of Ether already released.
     */
    function totalReleased() public view returns (uint256) {
        return _totalReleased;
    }

    /**
     * @dev Getter for the total amount of `token` already released. `token` should be the address of an IERC20
     * contract.
     */
    function totalReleased(IERC20 token) public view returns (uint256) {
        return _erc20TotalReleased[token];
    }

    /**
     * @dev Getter for the amount of shares held by an account.
     */
    function shares(address account) public view returns (uint256) {
        return _shares[account];
    }

    /**
     * @dev Getter for the amount of Ether already released to a payee.
     */
    function released(address account) public view returns (uint256) {
        return _released[account];
    }

    /**
     * @dev Getter for the amount of `token` tokens already released to a payee. `token` should be the address of an
     * IERC20 contract.
     */
    function released(IERC20 token, address account) public view returns (uint256) {
        return _erc20Released[token][account];
    }

    /**
     * @dev Getter for the address of the payee number `index`.
     */
    function payee(uint256 index) public view returns (address) {
        return _payees[index];
    }

    /**
     * @dev Getter for the amount of payee's releasable Ether.
     */
    function releasable(address account) public view returns (uint256) {
        uint256 totalReceived = address(this).balance + totalReleased();
        return _pendingPayment(account, totalReceived, released(account));
    }

    /**
     * @dev Getter for the amount of payee's releasable `token` tokens. `token` should be the address of an
     * IERC20 contract.
     */
    function releasable(IERC20 token, address account) public view returns (uint256) {
        uint256 totalReceived = token.balanceOf(address(this)) + totalReleased(token);
        return _pendingPayment(account, totalReceived, released(token, account));
    }

    /**
     * @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
     * total shares and their previous withdrawals.
     */
    function release(address payable account) public virtual {
        require(_shares[account] > 0, "PaymentSplitter: account has no shares");

        uint256 payment = releasable(account);

        require(payment != 0, "PaymentSplitter: account is not due payment");

        // _totalReleased is the sum of all values in _released.
        // If "_totalReleased += payment" does not overflow, then "_released[account] += payment" cannot overflow.
        _totalReleased += payment;
        unchecked {
            _released[account] += payment;
        }

        Address.sendValue(account, payment);
        emit PaymentReleased(account, payment);
    }

    /**
     * @dev Triggers a transfer to `account` of the amount of `token` tokens they are owed, according to their
     * percentage of the total shares and their previous withdrawals. `token` must be the address of an IERC20
     * contract.
     */
    function release(IERC20 token, address account) public virtual {
        require(_shares[account] > 0, "PaymentSplitter: account has no shares");

        uint256 payment = releasable(token, account);

        require(payment != 0, "PaymentSplitter: account is not due payment");

        // _erc20TotalReleased[token] is the sum of all values in _erc20Released[token].
        // If "_erc20TotalReleased[token] += payment" does not overflow, then "_erc20Released[token][account] += payment"
        // cannot overflow.
        _erc20TotalReleased[token] += payment;
        unchecked {
            _erc20Released[token][account] += payment;
        }

        SafeERC20.safeTransfer(token, account, payment);
        emit ERC20PaymentReleased(token, account, payment);
    }

    /**
     * @dev internal logic for computing the pending payment of an `account` given the token historical balances and
     * already released amounts.
     */
    function _pendingPayment(
        address account,
        uint256 totalReceived,
        uint256 alreadyReleased
    ) private view returns (uint256) {
        return (totalReceived * _shares[account]) / _totalShares - alreadyReleased;
    }

    /**
     * @dev Add a new payee to the contract.
     * @param account The address of the payee to add.
     * @param shares_ The number of shares owned by the payee.
     */
    function _addPayee(address account, uint256 shares_) private {
        require(account != address(0), "PaymentSplitter: account is the zero address");
        require(shares_ > 0, "PaymentSplitter: shares are 0");
        require(_shares[account] == 0, "PaymentSplitter: account already has shares");

        _payees.push(account);
        _shares[account] = shares_;
        _totalShares = _totalShares + shares_;
        emit PayeeAdded(account, shares_);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {RevokableOperatorFilterer} from './RevokableOperatorFilterer.sol';
import {CANONICAL_CORI_SUBSCRIPTION, CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS} from './Constants.sol';

/**
 * @title  RevokableDefaultOperatorFilterer
 * @notice Inherits from RevokableOperatorFilterer and automatically subscribes to the default OpenSea subscription.
 *         Note that OpenSea will disable creator earnings enforcement if filtered operators begin fulfilling orders
 *         on-chain, eg, if the registry is revoked or bypassed.
 */

abstract contract RevokableDefaultOperatorFilterer is RevokableOperatorFilterer {
    /// @dev The constructor that is called when the contract is being deployed.
    constructor() RevokableOperatorFilterer(CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS, CANONICAL_CORI_SUBSCRIPTION, true) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {UpdatableOperatorFilterer} from './UpdatableOperatorFilterer.sol';
import {IOperatorFilterRegistry} from './IOperatorFilterRegistry.sol';

/**
 * @title  RevokableOperatorFilterer
 * @notice This contract is meant to allow contracts to permanently skip OperatorFilterRegistry checks if desired. The
 *         Registry itself has an "unregister" function, but if the contract is ownable, the owner can re-register at
 *         any point. As implemented, this abstract contract allows the contract owner to permanently skip the
 *         OperatorFilterRegistry checks by calling revokeOperatorFilterRegistry. Once done, the registry
 *         address cannot be further updated.
 *         Note that OpenSea will still disable creator earnings enforcement if filtered operators begin fulfilling orders
 *         on-chain, eg, if the registry is revoked or bypassed.
 */
abstract contract RevokableOperatorFilterer is UpdatableOperatorFilterer {
    /// @dev Emitted when the registry has already been revoked.
    error RegistryHasBeenRevoked();
    /// @dev Emitted when the initial registry address is attempted to be set to the zero address.
    error InitialRegistryAddressCannotBeZeroAddress();

    event OperatorFilterRegistryRevoked();

    bool public isOperatorFilterRegistryRevoked;

    /// @dev The constructor that is called when the contract is being deployed.
    constructor(address _registry, address subscriptionOrRegistrantToCopy, bool subscribe) UpdatableOperatorFilterer(_registry, subscriptionOrRegistrantToCopy, subscribe) {
        // don't allow creating a contract with a permanently revoked registry
        if (_registry == address(0)) {
            revert InitialRegistryAddressCannotBeZeroAddress();
        }
    }

    /**
     * @notice Update the address that the contract will make OperatorFilter checks against. When set to the zero
     *         address, checks will be permanently bypassed, and the address cannot be updated again. OnlyOwner.
     */
    function updateOperatorFilterRegistryAddress(address newRegistry) public override {
        if (msg.sender != owner()) {
            revert OnlyOwner();
        }
        // if registry has been revoked, do not allow further updates
        if (isOperatorFilterRegistryRevoked) {
            revert RegistryHasBeenRevoked();
        }

        operatorFilterRegistry = IOperatorFilterRegistry(newRegistry);
        emit OperatorFilterRegistryAddressUpdated(newRegistry);
    }

    /**
     * @notice Revoke the OperatorFilterRegistry address, permanently bypassing checks. OnlyOwner.
     */
    function revokeOperatorFilterRegistry() public {
        if (msg.sender != owner()) {
            revert OnlyOwner();
        }
        // if registry has been revoked, do not allow further updates
        if (isOperatorFilterRegistryRevoked) {
            revert RegistryHasBeenRevoked();
        }

        // set to zero address to bypass checks
        operatorFilterRegistry = IOperatorFilterRegistry(address(0));
        isOperatorFilterRegistryRevoked = true;
        emit OperatorFilterRegistryRevoked();
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

import {IOperatorFilterRegistry} from './IOperatorFilterRegistry.sol';

/**
 * @title  UpdatableOperatorFilterer
 * @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another
 *         registrant's entries in the OperatorFilterRegistry. This contract allows the Owner to update the
 *         OperatorFilterRegistry address via updateOperatorFilterRegistryAddress, including to the zero address,
 *         which will bypass registry checks.
 *         Note that OpenSea will still disable creator earnings enforcement if filtered operators begin fulfilling orders
 *         on-chain, eg, if the registry is revoked or bypassed.
 * @dev    This smart contract is meant to be inherited by token contracts so they can use the following:
 *         - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.
 *         - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.
 */
abstract contract UpdatableOperatorFilterer {
    /// @dev Emitted when an operator is not allowed.
    error OperatorNotAllowed(address operator);
    /// @dev Emitted when someone other than the owner is trying to call an only owner function.
    error OnlyOwner();

    event OperatorFilterRegistryAddressUpdated(address newRegistry);

    IOperatorFilterRegistry public operatorFilterRegistry;

    /// @dev The constructor that is called when the contract is being deployed.
    constructor(address _registry, address subscriptionOrRegistrantToCopy, bool subscribe) {
        IOperatorFilterRegistry registry = IOperatorFilterRegistry(_registry);
        operatorFilterRegistry = registry;
        // If an inheriting token contract is deployed to a network without the registry deployed, the modifier
        // will not revert, but the contract will need to be registered with the registry once it is deployed in
        // order for the modifier to filter addresses.
        if (address(registry).code.length > 0) {
            if (subscribe) {
                registry.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
            } else {
                if (subscriptionOrRegistrantToCopy != address(0)) {
                    registry.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
                } else {
                    registry.register(address(this));
                }
            }
        }
    }

    /**
     * @dev A helper function to check if the operator is allowed.
     */
    modifier onlyAllowedOperator(address from) virtual {
        // Allow spending tokens from addresses with balance
        // Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
        // from an EOA.
        if (from != msg.sender) {
            _checkFilterOperator(msg.sender);
        }
        _;
    }

    /**
     * @dev A helper function to check if the operator approval is allowed.
     */
    modifier onlyAllowedOperatorApproval(address operator) virtual {
        _checkFilterOperator(operator);
        _;
    }

    /**
     * @notice Update the address that the contract will make OperatorFilter checks against. When set to the zero
     *         address, checks will be bypassed. OnlyOwner.
     */
    function updateOperatorFilterRegistryAddress(address newRegistry) public virtual {
        if (msg.sender != owner()) {
            revert OnlyOwner();
        }
        operatorFilterRegistry = IOperatorFilterRegistry(newRegistry);
        emit OperatorFilterRegistryAddressUpdated(newRegistry);
    }

    /**
     * @dev Assume the contract has an owner, but leave specific Ownable implementation up to inheriting contract.
     */
    function owner() public view virtual returns (address);

    /**
     * @dev A helper function to check if the operator is allowed.
     */
    function _checkFilterOperator(address operator) internal view virtual {
        IOperatorFilterRegistry registry = operatorFilterRegistry;
        // Check registry code length to facilitate testing in environments without a deployed registry.
        if (address(registry) != address(0) && address(registry).code.length > 0) {
            // under normal circumstances, this function will revert rather than return false, but inheriting contracts
            // may specify their own OperatorFilterRegistry implementations, which may behave differently
            if (!registry.isOperatorAllowed(address(this), operator)) {
                revert OperatorNotAllowed(operator);
            }
        }
    }
}

// SPDX-License-Identifier: GPL-3.0
// LICENSE
// This is a modified version of the original code from the
// NounsToken.sol— an implementation of OpenZeppelin's ERC-721:
// https://github.com/nounsDAO/nouns-monorepo/blob/master/packages/nouns-contracts/contracts/NounsToken.sol
// The original code is licensed under the GPL-3.0 license
// Thank you to the Nouns team for the inspiration and code!

pragma solidity ^0.8.6;

import {UpdatableOperatorFilterer} from '../../utils/operator-filter-registry/UpdatableOperatorFilterer.sol';
import {RevokableDefaultOperatorFilterer} from '../../utils/operator-filter-registry/RevokableDefaultOperatorFilterer.sol';

import {Ownable} from '@openzeppelin/contracts/access/Ownable.sol';
import {Strings} from '@openzeppelin/contracts/utils/Strings.sol';
import {Base64} from '@openzeppelin/contracts/utils/Base64.sol';
import {Math} from '@openzeppelin/contracts/utils/math/Math.sol';

import {IERC721} from '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import {ERC721} from '@openzeppelin/contracts/token/ERC721/ERC721.sol';

import {ERC2981} from '@openzeppelin/contracts/token/common/ERC2981.sol';

import {IERC165} from '@openzeppelin/contracts/utils/introspection/IERC165.sol';

import {PaymentSplitter} from '@openzeppelin/contracts/finance/PaymentSplitter.sol';

import {WildNFT} from './WildNFT.sol';

interface IWildNFT is IERC721 {
    event TokenCreated(uint256 indexed tokenId, address mintedTo);
    event TokenBurned(uint256 indexed tokenId);
    event MetadataUpdate(uint256 _tokenId);
    event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);

    function mint(address _to) external returns (uint256);

    function burn(uint256 tokenId) external;

    function setMinter(address minter) external;

    function setBaseURI(string memory _newBaseURI) external;

    function totalSupply() external view returns (uint256);

    function maxSupply() external view returns (uint256);
}

abstract contract WildNFT is IWildNFT, Ownable, RevokableDefaultOperatorFilterer, ERC721, ERC2981, PaymentSplitter {
    // An address who has permissions to mint qf tokens
    address public minter;

    // Mapping of operators to whether they are approved or not
    mapping(address => bool) public authorized;

    // Mapping of addresses flagged for denying token interactions
    mapping(address => bool) public blockList;
    uint256 public _currentTokenId;
    uint256 public maxSupply;
    string public baseURI;

    constructor(string memory name_, string memory symbol_, address _minter, uint256 _maxSupply, string memory _baseURI, address[] memory _payees, uint256[] memory _shares, uint96 _feeNumerator) PaymentSplitter(_payees, _shares) ERC721(name_, symbol_) {
        minter = _minter;
        maxSupply = _maxSupply;
        baseURI = _baseURI;
        _setDefaultRoyalty(address(this), _feeNumerator);
    }

    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721, IERC165, ERC2981) returns (bool) {
        return super.supportsInterface(interfaceId);
    }

    /**
     * @notice Require that the sender is the minter.
     */
    modifier onlyMinter() {
        require(msg.sender == minter, 'Sender is not the minter');
        _;
    }

    /**
     * @notice updates the deny list
     * @param flaggedOperator the address to be added to the deny list
     * @param status whether the address is to be added or removed from the deny list
     */
    function updateDenyList(address flaggedOperator, bool status) public onlyOwner {
        _updateDenyList(flaggedOperator, status);
    }

    /*
     * @notice Override isApprovedForAll
     * @param owner The owner of the Nouns
     * @param operator The operator to check if approved
     */
    function isApprovedForAll(address _owner, address operator) public view override(IERC721, ERC721) returns (bool) {
        require(blockList[operator] == false, 'Operator has been denied by contract owner.');

        if (authorized[operator] == true) {
            return true;
        }

        return super.isApprovedForAll(_owner, operator);
    }

    /* OS */
    function setApprovalForAll(address operator, bool approved) public override(IERC721, ERC721) onlyAllowedOperatorApproval(operator) {
        super.setApprovalForAll(operator, approved);
    }

    function approve(address operator, uint256 tokenId) public override(IERC721, ERC721) onlyAllowedOperatorApproval(operator) {
        super.approve(operator, tokenId);
    }

    function transferFrom(address from, address to, uint256 tokenId) public override(IERC721, ERC721) onlyAllowedOperator(from) {
        super.transferFrom(from, to, tokenId);
    }

    function safeTransferFrom(address from, address to, uint256 tokenId) public override(IERC721, ERC721) onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId);
    }

    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public override(IERC721, ERC721) onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId, data);
    }

    function owner() public view virtual override(Ownable, UpdatableOperatorFilterer) returns (address) {
        return Ownable.owner();
    }

    /**
     * @notice sets the authorized operators for interacting with the contract
     * @param operator the address to be added to the authorized operators
     * @param approved whether the address is approved or not within authorized operators
     */
    function setAuthorized(address operator, bool approved) public onlyOwner {
        authorized[operator] = approved;
    }

    /**
     * @notice Set the token minter.
     * @dev Only callable by the owner when not locked.
     * @param _minter The address of the new minter.
     */
    function setMinter(address _minter) external onlyOwner {
        minter = _minter;
    }

    /**
     * @notice updates the deny list
     * @param flaggedOperator The address to be approved.
     * @param status True if the operator is approved, false to revoke approval.
     */
    function _updateDenyList(address flaggedOperator, bool status) internal virtual {
        blockList[flaggedOperator] = status;
    }

    /**
     * @notice Mint a token to the given address.
     * @dev Only callable by the minter.
     * @param _to The address to mint the qf token to.
     * @return The ID of the newly minted qf token.
     */
    function mint(address _to) public override onlyMinter returns (uint256) {
        require(_currentTokenId < maxSupply, 'Max supply reached');
        return _mintTo(_to, _currentTokenId++);
    }

    /**
     * @notice Burn a pass.
     * @dev Only callable by the minter.
     * @param tokenId The ID of the qf token to burn.
     */
    function burn(uint256 tokenId) public override onlyMinter {
        _burn(tokenId);
        emit TokenBurned(tokenId);
    }

    /**
     * @notice Set the base URI.
     * @dev Only callable by the owner.
     * @param _newBaseURI The new base URI.
     */
    function setBaseURI(string memory _newBaseURI) public onlyOwner {
        baseURI = _newBaseURI;
        emit BatchMetadataUpdate(0, maxSupply - 1);
    }

    /// @notice Identical to setBaseURI but callable by minter only.
    function setBaseURIMinter(string memory _newBaseURI) public onlyMinter {
        baseURI = _newBaseURI;
        emit BatchMetadataUpdate(0, maxSupply - 1);
    }

    /** @notice Mints a new token
     * @param to: the address of the new owner looking to mint
     * @param tokenId: the token ID
     * @return the ID of the newly minted token
     */
    function _mintTo(address to, uint256 tokenId) internal returns (uint256) {
        _mint(to, tokenId);
        emit TokenCreated(tokenId, to);

        return tokenId;
    }

    function totalSupply() public view returns (uint256) {
        return _currentTokenId;
    }
}

// SPDX-License-Identifier: GPL-3.0
// LICENSE
// This is a modified version of the original code from the
// NounsToken.sol— an implementation of OpenZeppelin's ERC-721:
// https://github.com/nounsDAO/nouns-monorepo/blob/master/packages/nouns-contracts/contracts/NounsToken.sol
// The original code is licensed under the GPL-3.0 license
// Thank you to the Nouns team for the inspiration and code!

pragma solidity ^0.8.6;

import {UpdatableOperatorFilterer} from '../../utils/operator-filter-registry/UpdatableOperatorFilterer.sol';
import {RevokableDefaultOperatorFilterer} from '../../utils/operator-filter-registry/RevokableDefaultOperatorFilterer.sol';

import {Ownable} from '@openzeppelin/contracts/access/Ownable.sol';
import {Strings} from '@openzeppelin/contracts/utils/Strings.sol';
import {Base64} from '@openzeppelin/contracts/utils/Base64.sol';
import {Math} from '@openzeppelin/contracts/utils/math/Math.sol';

import {IERC721} from '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import {ERC721} from '@openzeppelin/contracts/token/ERC721/ERC721.sol';

import {ERC2981} from '@openzeppelin/contracts/token/common/ERC2981.sol';

import {IERC165} from '@openzeppelin/contracts/utils/introspection/IERC165.sol';

import {PaymentSplitter} from '@openzeppelin/contracts/finance/PaymentSplitter.sol';

import {WildNFT} from './WildNFT.sol';

interface IWildNFT is IERC721 {
    event TokenCreated(uint256 indexed tokenId, address mintedTo);
    event TokenBurned(uint256 indexed tokenId);
    event MetadataUpdate(uint256 _tokenId);
    event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);

    function mint(address _to) external returns (uint256);

    function burn(uint256 tokenId) external;

    function setMinter(address minter) external;

    function setBaseURI(string memory _newBaseURI) external;

    function totalSupply() external view returns (uint256);

    function maxSupply() external view returns (uint256);
}

abstract contract WildNFTRandom is IWildNFT, Ownable, RevokableDefaultOperatorFilterer, ERC721, ERC2981, PaymentSplitter {
    // An address who has permissions to mint qf tokens
    address public minter;

    // Mapping of operators to whether they are approved or not
    mapping(address => bool) public authorized;

    // Mapping of addresses flagged for denying token interactions
    mapping(address => bool) public blockList;
    uint256 public _currentTokenId;
    uint256 public maxSupply;

    mapping(uint256 => uint256) private _availableTokens;

    string public baseURI;

    constructor(string memory name_, string memory symbol_, address _minter, uint256 _maxSupply, string memory _baseURI, address[] memory _payees, uint256[] memory _shares, uint96 _feeNumerator) PaymentSplitter(_payees, _shares) ERC721(name_, symbol_) {
        minter = _minter;
        maxSupply = _maxSupply;
        baseURI = _baseURI;
        _setDefaultRoyalty(address(this), _feeNumerator);
    }

    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721, IERC165, ERC2981) returns (bool) {
        return super.supportsInterface(interfaceId);
    }

    /**
     * @notice Require that the sender is the minter.
     */
    modifier onlyMinter() {
        require(msg.sender == minter, 'Sender is not the minter');
        _;
    }

    /**
     * @notice updates the deny list
     * @param flaggedOperator the address to be added to the deny list
     * @param status whether the address is to be added or removed from the deny list
     */
    function updateDenyList(address flaggedOperator, bool status) public onlyOwner {
        _updateDenyList(flaggedOperator, status);
    }

    /*
     * @notice Override isApprovedForAll
     * @param owner The owner of the Nouns
     * @param operator The operator to check if approved
     */
    function isApprovedForAll(address _owner, address operator) public view override(IERC721, ERC721) returns (bool) {
        require(blockList[operator] == false, 'Operator has been denied by contract owner.');

        if (authorized[operator] == true) {
            return true;
        }

        return super.isApprovedForAll(_owner, operator);
    }

    /* OS */
    function setApprovalForAll(address operator, bool approved) public override(IERC721, ERC721) onlyAllowedOperatorApproval(operator) {
        super.setApprovalForAll(operator, approved);
    }

    function approve(address operator, uint256 tokenId) public override(IERC721, ERC721) onlyAllowedOperatorApproval(operator) {
        super.approve(operator, tokenId);
    }

    function transferFrom(address from, address to, uint256 tokenId) public override(IERC721, ERC721) onlyAllowedOperator(from) {
        super.transferFrom(from, to, tokenId);
    }

    function safeTransferFrom(address from, address to, uint256 tokenId) public override(IERC721, ERC721) onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId);
    }

    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public override(IERC721, ERC721) onlyAllowedOperator(from) {
        super.safeTransferFrom(from, to, tokenId, data);
    }

    function owner() public view virtual override(Ownable, UpdatableOperatorFilterer) returns (address) {
        return Ownable.owner();
    }

    /**
     * @notice sets the authorized operators for interacting with the contract
     * @param operator the address to be added to the authorized operators
     * @param approved whether the address is approved or not within authorized operators
     */
    function setAuthorized(address operator, bool approved) public onlyOwner {
        authorized[operator] = approved;
    }

    /**
     * @notice Set the token minter.
     * @dev Only callable by the owner when not locked.
     * @param _minter The address of the new minter.
     */
    function setMinter(address _minter) external onlyOwner {
        minter = _minter;
    }

    /**
     * @notice updates the deny list
     * @param flaggedOperator The address to be approved.
     * @param status True if the operator is approved, false to revoke approval.
     */
    function _updateDenyList(address flaggedOperator, bool status) internal virtual {
        blockList[flaggedOperator] = status;
    }

    // used to be called randomMint but renamed for compatability
    function mint(address to) public onlyMinter returns (uint256) {
        require(_currentTokenId < maxSupply, 'Max supply reached');
        require(to != address(0), 'ERC721: mint to the zero address');

        uint256 tokenId = getRandomAvailableTokenId(to, maxSupply - _currentTokenId++);

        return _mintTo(to, tokenId);
    }

    function getRandomAvailableTokenId(address to, uint256 updatedNumAvailableTokens) internal returns (uint256) {
        uint256 randomNum = uint256(keccak256(abi.encode(to, tx.gasprice, block.number, block.timestamp, block.prevrandao, blockhash(block.number - 1), address(this), updatedNumAvailableTokens)));
        uint256 randomIndex = randomNum % updatedNumAvailableTokens;
        return getAvailableTokenAtIndex(randomIndex, updatedNumAvailableTokens);
    }

    // Implements https://en.wikipedia.org/wiki/Fisher%E2%80%93Yates_shuffle. Code taken from CryptoPhunksV2
    function getAvailableTokenAtIndex(uint256 indexToUse, uint256 updatedNumAvailableTokens) internal returns (uint256) {
        uint256 valAtIndex = _availableTokens[indexToUse];
        uint256 result;
        if (valAtIndex == 0) {
            // This means the index itself is still an available token
            result = indexToUse;
        } else {
            // This means the index itself is not an available token, but the val at that index is.
            result = valAtIndex;
        }

        uint256 lastIndex = updatedNumAvailableTokens - 1;
        uint256 lastValInArray = _availableTokens[lastIndex];
        if (indexToUse != lastIndex) {
            // Replace the value at indexToUse, now that it's been used.
            // Replace it with the data from the last index in the array, since we are going to decrease the array size afterwards.
            if (lastValInArray == 0) {
                // This means the index itself is still an available token
                _availableTokens[indexToUse] = lastIndex;
            } else {
                // This means the index itself is not an available token, but the val at that index is.
                _availableTokens[indexToUse] = lastValInArray;
            }
        }
        if (lastValInArray != 0) {
            // Gas refund courtsey of @dievardump
            delete _availableTokens[lastIndex];
        }

        return result;
    }

    /**
     * @notice Burn a pass.
     * @dev Only callable by the minter.
     * @param tokenId The ID of the qf token to burn.
     */
    function burn(uint256 tokenId) public override onlyMinter {
        _burn(tokenId);
        emit TokenBurned(tokenId);
    }

    /**
     * @notice Set the base URI.
     * @dev Only callable by the owner.
     * @param _newBaseURI The new base URI.
     */
    function setBaseURI(string memory _newBaseURI) public onlyOwner {
        baseURI = _newBaseURI;
        emit BatchMetadataUpdate(0, maxSupply - 1);
    }

    /// @notice Identical to setBaseURI but callable by minter only.
    function setBaseURIMinter(string memory _newBaseURI) public onlyMinter {
        baseURI = _newBaseURI;
        emit BatchMetadataUpdate(0, maxSupply - 1);
    }

    /** @notice Mints a new token
     * @param to: the address of the new owner looking to mint
     * @param tokenId: the token ID
     * @return the ID of the newly minted token
     */
    function _mintTo(address to, uint256 tokenId) internal returns (uint256) {
        _mint(to, tokenId);
        emit TokenCreated(tokenId, to);

        return tokenId;
    }

    function totalSupply() public view returns (uint256) {
        return _currentTokenId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

{
  "compilationTarget": {
    "contracts/artist/15_aluna/DeathBeforeTheBloom.sol": "DeathBeforeTheBloom"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}