// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (metatx/ERC2771Context.sol)

pragma solidity ^0.8.9;

import "../utils/Context.sol";

/**
 * @dev Context variant with ERC2771 support.
 */
abstract contract ERC2771Context is Context {
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    address private immutable _trustedForwarder;

    /// @custom:oz-upgrades-unsafe-allow constructor
    constructor(address trustedForwarder) {
        _trustedForwarder = trustedForwarder;
    }

    function isTrustedForwarder(address forwarder) public view virtual returns (bool) {
        return forwarder == _trustedForwarder;
    }

    function _msgSender() internal view virtual override returns (address sender) {
        if (isTrustedForwarder(msg.sender)) {
            // The assembly code is more direct than the Solidity version using `abi.decode`.
            /// @solidity memory-safe-assembly
            assembly {
                sender := shr(96, calldataload(sub(calldatasize(), 20)))
            }
        } else {
            return super._msgSender();
        }
    }

    function _msgData() internal view virtual override returns (bytes calldata) {
        if (isTrustedForwarder(msg.sender)) {
            return msg.data[:msg.data.length - 20];
        } else {
            return super._msgData();
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.19;

import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {IReward} from "../interfaces/IReward.sol";
import {IGauge} from "../interfaces/IGauge.sol";
import {IPool} from "../interfaces/IPool.sol";
import {IVoter} from "../interfaces/IVoter.sol";
import {IVotingEscrow} from "../interfaces/IVotingEscrow.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {ERC2771Context} from "@openzeppelin/contracts/metatx/ERC2771Context.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {ProtocolTimeLibrary} from "../libraries/ProtocolTimeLibrary.sol";

/// @title Protocol Gauge
/// @author veldorome.finance, @figs999, @pegahcarter
/// @notice Gauge contract for distribution of emissions by address
contract Gauge is IGauge, ERC2771Context, ReentrancyGuard {
    using SafeERC20 for IERC20;
    /// @inheritdoc IGauge
    address public immutable stakingToken;
    /// @inheritdoc IGauge
    address public immutable rewardToken;
    /// @inheritdoc IGauge
    address public immutable feesVotingReward;
    /// @inheritdoc IGauge
    address public immutable voter;
    /// @inheritdoc IGauge
    address public immutable ve;

    /// @inheritdoc IGauge
    bool public immutable isPool;

    uint256 internal constant DURATION = 7 days; // rewards are released over 7 days
    uint256 internal constant PRECISION = 10 ** 18;

    /// @inheritdoc IGauge
    uint256 public periodFinish;
    /// @inheritdoc IGauge
    uint256 public rewardRate;
    /// @inheritdoc IGauge
    uint256 public lastUpdateTime;
    /// @inheritdoc IGauge
    uint256 public rewardPerTokenStored;
    /// @inheritdoc IGauge
    uint256 public totalSupply;
    /// @inheritdoc IGauge
    mapping(address => uint256) public balanceOf;
    /// @inheritdoc IGauge
    mapping(address => uint256) public userRewardPerTokenPaid;
    /// @inheritdoc IGauge
    mapping(address => uint256) public rewards;
    /// @inheritdoc IGauge
    mapping(uint256 => uint256) public rewardRateByEpoch;

    /// @inheritdoc IGauge
    uint256 public fees0;
    /// @inheritdoc IGauge
    uint256 public fees1;

    constructor(
        address _forwarder,
        address _stakingToken,
        address _feesVotingReward,
        address _rewardToken,
        address _voter,
        bool _isPool
    ) ERC2771Context(_forwarder) {
        stakingToken = _stakingToken;
        feesVotingReward = _feesVotingReward;
        rewardToken = _rewardToken;
        voter = _voter;
        isPool = _isPool;
        ve = IVoter(voter).ve();
    }

    function _claimFees() internal returns (uint256 claimed0, uint256 claimed1) {
        if (!isPool) {
            return (0, 0);
        }
        (claimed0, claimed1) = IPool(stakingToken).claimFees();
        if (claimed0 > 0 || claimed1 > 0) {
            uint256 _fees0 = fees0 + claimed0;
            uint256 _fees1 = fees1 + claimed1;
            (address _token0, address _token1) = IPool(stakingToken).tokens();
            if (_fees0 > DURATION) {
                fees0 = 0;
                IERC20(_token0).safeApprove(feesVotingReward, _fees0);
                IReward(feesVotingReward).notifyRewardAmount(_token0, _fees0);
            } else {
                fees0 = _fees0;
            }
            if (_fees1 > DURATION) {
                fees1 = 0;
                IERC20(_token1).safeApprove(feesVotingReward, _fees1);
                IReward(feesVotingReward).notifyRewardAmount(_token1, _fees1);
            } else {
                fees1 = _fees1;
            }

            emit ClaimFees(_msgSender(), claimed0, claimed1);
        }
    }

    /// @inheritdoc IGauge
    function rewardPerToken() public view returns (uint256) {
        if (totalSupply == 0) {
            return rewardPerTokenStored;
        }
        return
            rewardPerTokenStored +
            ((lastTimeRewardApplicable() - lastUpdateTime) * rewardRate * PRECISION) /
            totalSupply;
    }

    /// @inheritdoc IGauge
    function lastTimeRewardApplicable() public view returns (uint256) {
        return Math.min(block.timestamp, periodFinish);
    }

    /// @inheritdoc IGauge
    function getReward(address _account) external nonReentrant {
        address sender = _msgSender();
        if (sender != _account && sender != voter) revert NotAuthorized();

        _updateRewards(_account);

        uint256 reward = rewards[_account];
        if (reward > 0) {
            rewards[_account] = 0;
            IERC20(rewardToken).safeTransfer(_account, reward);
            emit ClaimRewards(_account, reward);
        }
    }

    /// @inheritdoc IGauge
    function earned(address _account) public view returns (uint256) {
        return
            (balanceOf[_account] * (rewardPerToken() - userRewardPerTokenPaid[_account])) /
            PRECISION +
            rewards[_account];
    }

    /// @inheritdoc IGauge
    function deposit(uint256 _amount) external {
        _depositFor(_amount, _msgSender());
    }

    /// @inheritdoc IGauge
    function deposit(uint256 _amount, address _recipient) external {
        _depositFor(_amount, _recipient);
    }

    function _depositFor(uint256 _amount, address _recipient) internal nonReentrant {
        if (_amount == 0) revert ZeroAmount();
        if (!IVoter(voter).isAlive(address(this))) revert NotAlive();

        address sender = _msgSender();
        _updateRewards(_recipient);

        IERC20(stakingToken).safeTransferFrom(sender, address(this), _amount);
        totalSupply += _amount;
        balanceOf[_recipient] += _amount;

        emit Deposit(sender, _recipient, _amount);
    }

    /// @inheritdoc IGauge
    function withdraw(uint256 _amount) external nonReentrant {
        address sender = _msgSender();

        _updateRewards(sender);

        totalSupply -= _amount;
        balanceOf[sender] -= _amount;
        IERC20(stakingToken).safeTransfer(sender, _amount);

        emit Withdraw(sender, _amount);
    }

    function _updateRewards(address _account) internal {
        rewardPerTokenStored = rewardPerToken();
        lastUpdateTime = lastTimeRewardApplicable();
        rewards[_account] = earned(_account);
        userRewardPerTokenPaid[_account] = rewardPerTokenStored;
    }

    /// @inheritdoc IGauge
    function left() external view returns (uint256) {
        if (block.timestamp >= periodFinish) return 0;
        uint256 _remaining = periodFinish - block.timestamp;
        return _remaining * rewardRate;
    }

    /// @inheritdoc IGauge
    function notifyRewardAmount(uint256 _amount) external nonReentrant {
        address sender = _msgSender();
        if (sender != voter) revert NotVoter();
        if (_amount == 0) revert ZeroAmount();
        _claimFees();
        _notifyRewardAmount(sender, _amount);
    }

    /// @inheritdoc IGauge
    function notifyRewardWithoutClaim(uint256 _amount) external nonReentrant {
        address sender = _msgSender();
        if (sender != IVotingEscrow(ve).team()) revert NotTeam();
        if (_amount == 0) revert ZeroAmount();
        _notifyRewardAmount(sender, _amount);
    }

    function _notifyRewardAmount(address sender, uint256 _amount) internal {
        rewardPerTokenStored = rewardPerToken();
        uint256 timestamp = block.timestamp;
        uint256 timeUntilNext = ProtocolTimeLibrary.epochNext(timestamp) - timestamp;

        if (timestamp >= periodFinish) {
            IERC20(rewardToken).safeTransferFrom(sender, address(this), _amount);
            rewardRate = _amount / timeUntilNext;
        } else {
            uint256 _remaining = periodFinish - timestamp;
            uint256 _leftover = _remaining * rewardRate;
            IERC20(rewardToken).safeTransferFrom(sender, address(this), _amount);
            rewardRate = (_amount + _leftover) / timeUntilNext;
        }
        rewardRateByEpoch[ProtocolTimeLibrary.epochStart(timestamp)] = rewardRate;
        if (rewardRate == 0) revert ZeroRewardRate();

        // Ensure the provided reward amount is not more than the balance in the contract.
        // This keeps the reward rate in the right range, preventing overflows due to
        // very high values of rewardRate in the earned and rewardsPerToken functions;
        // Reward + leftover must be less than 2^256 / 10^18 to avoid overflow.
        uint256 balance = IERC20(rewardToken).balanceOf(address(this));
        if (rewardRate > balance / timeUntilNext) revert RewardRateTooHigh();

        lastUpdateTime = timestamp;
        periodFinish = timestamp + timeUntilNext;
        emit NotifyReward(sender, _amount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";
import "./IERC721.sol";

/// @title EIP-721 Metadata Update Extension
interface IERC4906 is IERC165, IERC721 {
    /// @dev This event emits when the metadata of a token is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFT.
    event MetadataUpdate(uint256 _tokenId);

    /// @dev This event emits when the metadata of a range of tokens is changed.
    /// So that the third-party platforms such as NFT market could
    /// timely update the images and related attributes of the NFTs.
    event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (interfaces/IERC6372.sol)

pragma solidity ^0.8.0;

interface IERC6372 {
    /**
     * @dev Clock used for flagging checkpoints. Can be overridden to implement timestamp based checkpoints (and voting).
     */
    function clock() external view returns (uint48);

    /**
     * @dev Description of the clock
     */
    // solhint-disable-next-line func-name-mixedcase
    function CLOCK_MODE() external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721.sol)

pragma solidity ^0.8.0;

import "../token/ERC721/IERC721.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IGauge {
    error NotAlive();
    error NotAuthorized();
    error NotVoter();
    error NotTeam();
    error RewardRateTooHigh();
    error ZeroAmount();
    error ZeroRewardRate();

    event Deposit(address indexed from, address indexed to, uint256 amount);
    event Withdraw(address indexed from, uint256 amount);
    event NotifyReward(address indexed from, uint256 amount);
    event ClaimFees(address indexed from, uint256 claimed0, uint256 claimed1);
    event ClaimRewards(address indexed from, uint256 amount);

    /// @notice Address of the pool LP token which is deposited (staked) for rewards
    function stakingToken() external view returns (address);

    /// @notice Address of the token (AERO) rewarded to stakers
    function rewardToken() external view returns (address);

    /// @notice Address of the FeesVotingReward contract linked to the gauge
    function feesVotingReward() external view returns (address);

    /// @notice Address of Protocol Voter
    function voter() external view returns (address);

    /// @notice Address of Protocol Voting Escrow
    function ve() external view returns (address);

    /// @notice Returns if gauge is linked to a legitimate Protocol pool
    function isPool() external view returns (bool);

    /// @notice Timestamp end of current rewards period
    function periodFinish() external view returns (uint256);

    /// @notice Current reward rate of rewardToken to distribute per second
    function rewardRate() external view returns (uint256);

    /// @notice Most recent timestamp contract has updated state
    function lastUpdateTime() external view returns (uint256);

    /// @notice Most recent stored value of rewardPerToken
    function rewardPerTokenStored() external view returns (uint256);

    /// @notice Amount of stakingToken deposited for rewards
    function totalSupply() external view returns (uint256);

    /// @notice Get the amount of stakingToken deposited by an account
    function balanceOf(address) external view returns (uint256);

    /// @notice Cached rewardPerTokenStored for an account based on their most recent action
    function userRewardPerTokenPaid(address) external view returns (uint256);

    /// @notice Cached amount of rewardToken earned for an account
    function rewards(address) external view returns (uint256);

    /// @notice View to see the rewardRate given the timestamp of the start of the epoch
    function rewardRateByEpoch(uint256) external view returns (uint256);

    /// @notice Cached amount of fees generated from the Pool linked to the Gauge of token0
    function fees0() external view returns (uint256);

    /// @notice Cached amount of fees generated from the Pool linked to the Gauge of token1
    function fees1() external view returns (uint256);

    /// @notice Get the current reward rate per unit of stakingToken deposited
    function rewardPerToken() external view returns (uint256 _rewardPerToken);

    /// @notice Returns the last time the reward was modified or periodFinish if the reward has ended
    function lastTimeRewardApplicable() external view returns (uint256 _time);

    /// @notice Returns accrued balance to date from last claim / first deposit.
    function earned(address _account) external view returns (uint256 _earned);

    /// @notice Total amount of rewardToken to distribute for the current rewards period
    function left() external view returns (uint256 _left);

    /// @notice Retrieve rewards for an address.
    /// @dev Throws if not called by same address or voter.
    /// @param _account .
    function getReward(address _account) external;

    /// @notice Deposit LP tokens into gauge for msg.sender
    /// @param _amount .
    function deposit(uint256 _amount) external;

    /// @notice Deposit LP tokens into gauge for any user
    /// @param _amount .
    /// @param _recipient Recipient to give balance to
    function deposit(uint256 _amount, address _recipient) external;

    /// @notice Withdraw LP tokens for user
    /// @param _amount .
    function withdraw(uint256 _amount) external;

    /// @dev Notifies gauge of gauge rewards. Assumes gauge reward tokens is 18 decimals.
    ///      If not 18 decimals, rewardRate may have rounding issues.
    function notifyRewardAmount(uint256 amount) external;

    /// @dev Notifies gauge of gauge rewards without distributing its fees.
    ///      Assumes gauge reward tokens is 18 decimals.
    ///      If not 18 decimals, rewardRate may have rounding issues.
    function notifyRewardWithoutClaim(uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IPool {
    error DepositsNotEqual();
    error BelowMinimumK();
    error FactoryAlreadySet();
    error InsufficientLiquidity();
    error InsufficientLiquidityMinted();
    error InsufficientLiquidityBurned();
    error InsufficientOutputAmount();
    error InsufficientInputAmount();
    error IsPaused();
    error InvalidTo();
    error K();
    error NotEmergencyCouncil();

    event Fees(address indexed sender, uint256 amount0, uint256 amount1);
    event Mint(address indexed sender, uint256 amount0, uint256 amount1);
    event Burn(address indexed sender, address indexed to, uint256 amount0, uint256 amount1);
    event Swap(
        address indexed sender,
        address indexed to,
        uint256 amount0In,
        uint256 amount1In,
        uint256 amount0Out,
        uint256 amount1Out
    );
    event Sync(uint256 reserve0, uint256 reserve1);
    event Claim(address indexed sender, address indexed recipient, uint256 amount0, uint256 amount1);

    // Struct to capture time period obervations every 30 minutes, used for local oracles
    struct Observation {
        uint256 timestamp;
        uint256 reserve0Cumulative;
        uint256 reserve1Cumulative;
    }

    /// @notice Returns the decimal (dec), reserves (r), stable (st), and tokens (t) of token0 and token1
    function metadata()
        external
        view
        returns (uint256 dec0, uint256 dec1, uint256 r0, uint256 r1, bool st, address t0, address t1);

    /// @notice Claim accumulated but unclaimed fees (claimable0 and claimable1)
    function claimFees() external returns (uint256, uint256);

    /// @notice Returns [token0, token1]
    function tokens() external view returns (address, address);

    /// @notice Address of token in the pool with the lower address value
    function token0() external view returns (address);

    /// @notice Address of token in the poool with the higher address value
    function token1() external view returns (address);

    /// @notice Address of linked PoolFees.sol
    function poolFees() external view returns (address);

    /// @notice Address of PoolFactory that created this contract
    function factory() external view returns (address);

    /// @notice Capture oracle reading every 30 minutes (1800 seconds)
    function periodSize() external view returns (uint256);

    /// @notice Amount of token0 in pool
    function reserve0() external view returns (uint256);

    /// @notice Amount of token1 in pool
    function reserve1() external view returns (uint256);

    /// @notice Timestamp of last update to pool
    function blockTimestampLast() external view returns (uint256);

    /// @notice Cumulative of reserve0 factoring in time elapsed
    function reserve0CumulativeLast() external view returns (uint256);

    /// @notice Cumulative of reserve1 factoring in time elapsed
    function reserve1CumulativeLast() external view returns (uint256);

    /// @notice Accumulated fees of token0 (global)
    function index0() external view returns (uint256);

    /// @notice Accumulated fees of token1 (global)
    function index1() external view returns (uint256);

    /// @notice Get an LP's relative index0 to index0
    function supplyIndex0(address) external view returns (uint256);

    /// @notice Get an LP's relative index1 to index1
    function supplyIndex1(address) external view returns (uint256);

    /// @notice Amount of unclaimed, but claimable tokens from fees of token0 for an LP
    function claimable0(address) external view returns (uint256);

    /// @notice Amount of unclaimed, but claimable tokens from fees of token1 for an LP
    function claimable1(address) external view returns (uint256);

    /// @notice Returns the value of K in the Pool, based on its reserves.
    function getK() external returns (uint256);

    /// @notice Set pool name
    ///         Only callable by Voter.emergencyCouncil()
    /// @param __name String of new name
    function setName(string calldata __name) external;

    /// @notice Set pool symbol
    ///         Only callable by Voter.emergencyCouncil()
    /// @param __symbol String of new symbol
    function setSymbol(string calldata __symbol) external;

    /// @notice Get the number of observations recorded
    function observationLength() external view returns (uint256);

    /// @notice Get the value of the most recent observation
    function lastObservation() external view returns (Observation memory);

    /// @notice True if pool is stable, false if volatile
    function stable() external view returns (bool);

    /// @notice Produces the cumulative price using counterfactuals to save gas and avoid a call to sync.
    function currentCumulativePrices()
        external
        view
        returns (uint256 reserve0Cumulative, uint256 reserve1Cumulative, uint256 blockTimestamp);

    /// @notice Provides twap price with user configured granularity, up to the full window size
    /// @param tokenIn .
    /// @param amountIn .
    /// @param granularity .
    /// @return amountOut .
    function quote(address tokenIn, uint256 amountIn, uint256 granularity) external view returns (uint256 amountOut);

    /// @notice Returns a memory set of TWAP prices
    ///         Same as calling sample(tokenIn, amountIn, points, 1)
    /// @param tokenIn .
    /// @param amountIn .
    /// @param points Number of points to return
    /// @return Array of TWAP prices
    function prices(address tokenIn, uint256 amountIn, uint256 points) external view returns (uint256[] memory);

    /// @notice Same as prices with with an additional window argument.
    ///         Window = 2 means 2 * 30min (or 1 hr) between observations
    /// @param tokenIn .
    /// @param amountIn .
    /// @param points .
    /// @param window .
    /// @return Array of TWAP prices
    function sample(
        address tokenIn,
        uint256 amountIn,
        uint256 points,
        uint256 window
    ) external view returns (uint256[] memory);

    /// @notice This low-level function should be called from a contract which performs important safety checks
    /// @param amount0Out   Amount of token0 to send to `to`
    /// @param amount1Out   Amount of token1 to send to `to`
    /// @param to           Address to recieve the swapped output
    /// @param data         Additional calldata for flashloans
    function swap(uint256 amount0Out, uint256 amount1Out, address to, bytes calldata data) external;

    /// @notice This low-level function should be called from a contract which performs important safety checks
    ///         standard uniswap v2 implementation
    /// @param to Address to receive token0 and token1 from burning the pool token
    /// @return amount0 Amount of token0 returned
    /// @return amount1 Amount of token1 returned
    function burn(address to) external returns (uint256 amount0, uint256 amount1);

    /// @notice This low-level function should be called by addLiquidity functions in Router.sol, which performs important safety checks
    ///         standard uniswap v2 implementation
    /// @param to           Address to receive the minted LP token
    /// @return liquidity   Amount of LP token minted
    function mint(address to) external returns (uint256 liquidity);

    /// @notice Update reserves and, on the first call per block, price accumulators
    /// @return _reserve0 .
    /// @return _reserve1 .
    /// @return _blockTimestampLast .
    function getReserves() external view returns (uint256 _reserve0, uint256 _reserve1, uint256 _blockTimestampLast);

    /// @notice Get the amount of tokenOut given the amount of tokenIn
    /// @param amountIn Amount of token in
    /// @param tokenIn  Address of token
    /// @return Amount out
    function getAmountOut(uint256 amountIn, address tokenIn) external view returns (uint256);

    /// @notice Force balances to match reserves
    /// @param to Address to receive any skimmed rewards
    function skim(address to) external;

    /// @notice Force reserves to match balances
    function sync() external;

    /// @notice Called on pool creation by PoolFactory
    /// @param _token0 Address of token0
    /// @param _token1 Address of token1
    /// @param _stable True if stable, false if volatile
    function initialize(address _token0, address _token1, bool _stable) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IReward {
    error InvalidReward();
    error NotAuthorized();
    error NotGauge();
    error NotEscrowToken();
    error NotSingleToken();
    error NotVotingEscrow();
    error NotWhitelisted();
    error ZeroAmount();

    event Deposit(address indexed from, uint256 indexed tokenId, uint256 amount);
    event Withdraw(address indexed from, uint256 indexed tokenId, uint256 amount);
    event NotifyReward(address indexed from, address indexed reward, uint256 indexed epoch, uint256 amount);
    event ClaimRewards(address indexed from, address indexed reward, uint256 amount);

    /// @notice A checkpoint for marking balance
    struct Checkpoint {
        uint256 timestamp;
        uint256 balanceOf;
    }

    /// @notice A checkpoint for marking supply
    struct SupplyCheckpoint {
        uint256 timestamp;
        uint256 supply;
    }

    /// @notice Epoch duration constant (7 days)
    function DURATION() external view returns (uint256);

    /// @notice Address of Voter.sol
    function voter() external view returns (address);

    /// @notice Address of VotingEscrow.sol
    function ve() external view returns (address);

    /// @dev Address which has permission to externally call _deposit() & _withdraw()
    function authorized() external view returns (address);

    /// @notice Total amount currently deposited via _deposit()
    function totalSupply() external view returns (uint256);

    /// @notice Current amount deposited by tokenId
    function balanceOf(uint256 tokenId) external view returns (uint256);

    /// @notice Amount of tokens to reward depositors for a given epoch
    /// @param token Address of token to reward
    /// @param epochStart Startime of rewards epoch
    /// @return Amount of token
    function tokenRewardsPerEpoch(address token, uint256 epochStart) external view returns (uint256);

    /// @notice Most recent timestamp a veNFT has claimed their rewards
    /// @param  token Address of token rewarded
    /// @param tokenId veNFT unique identifier
    /// @return Timestamp
    function lastEarn(address token, uint256 tokenId) external view returns (uint256);

    /// @notice True if a token is or has been an active reward token, else false
    function isReward(address token) external view returns (bool);

    /// @notice The number of checkpoints for each tokenId deposited
    function numCheckpoints(uint256 tokenId) external view returns (uint256);

    /// @notice The total number of checkpoints
    function supplyNumCheckpoints() external view returns (uint256);

    /// @notice Deposit an amount into the rewards contract to earn future rewards associated to a veNFT
    /// @dev Internal notation used as only callable internally by `authorized`.
    /// @param amount   Amount deposited for the veNFT
    /// @param tokenId  Unique identifier of the veNFT
    function _deposit(uint256 amount, uint256 tokenId) external;

    /// @notice Withdraw an amount from the rewards contract associated to a veNFT
    /// @dev Internal notation used as only callable internally by `authorized`.
    /// @param amount   Amount deposited for the veNFT
    /// @param tokenId  Unique identifier of the veNFT
    function _withdraw(uint256 amount, uint256 tokenId) external;

    /// @notice Claim the rewards earned by a veNFT staker
    /// @param tokenId  Unique identifier of the veNFT
    /// @param tokens   Array of tokens to claim rewards of
    function getReward(uint256 tokenId, address[] memory tokens) external;

    /// @notice Add rewards for stakers to earn
    /// @param token    Address of token to reward
    /// @param amount   Amount of token to transfer to rewards
    function notifyRewardAmount(address token, uint256 amount) external;

    /// @notice Determine the prior balance for an account as of a block number
    /// @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
    /// @param tokenId      The token of the NFT to check
    /// @param timestamp    The timestamp to get the balance at
    /// @return The balance the account had as of the given block
    function getPriorBalanceIndex(uint256 tokenId, uint256 timestamp) external view returns (uint256);

    /// @notice Determine the prior index of supply staked by of a timestamp
    /// @dev Timestamp must be <= current timestamp
    /// @param timestamp The timestamp to get the index at
    /// @return Index of supply checkpoint
    function getPriorSupplyIndex(uint256 timestamp) external view returns (uint256);

    /// @notice Get number of rewards tokens
    function rewardsListLength() external view returns (uint256);

    /// @notice Calculate how much in rewards are earned for a specific token and veNFT
    /// @param token Address of token to fetch rewards of
    /// @param tokenId Unique identifier of the veNFT
    /// @return Amount of token earned in rewards
    function earned(address token, uint256 tokenId) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IVoter {
    error AlreadyVotedOrDeposited();
    error DistributeWindow();
    error FactoryPathNotApproved();
    error GaugeAlreadyKilled();
    error GaugeAlreadyRevived();
    error GaugeExists();
    error GaugeDoesNotExist(address _pool);
    error GaugeNotAlive(address _gauge);
    error InactiveManagedNFT();
    error MaximumVotingNumberTooLow();
    error NonZeroVotes();
    error NotAPool();
    error NotApprovedOrOwner();
    error NotGovernor();
    error NotEmergencyCouncil();
    error NotMinter();
    error NotWhitelistedNFT();
    error NotWhitelistedToken();
    error SameValue();
    error SpecialVotingWindow();
    error TooManyPools();
    error UnequalLengths();
    error ZeroBalance();
    error ZeroAddress();

    event GaugeCreated(
        address indexed poolFactory,
        address indexed votingRewardsFactory,
        address indexed gaugeFactory,
        address pool,
        address bribeVotingReward,
        address feeVotingReward,
        address gauge,
        address creator
    );
    event GaugeKilled(address indexed gauge);
    event GaugeRevived(address indexed gauge);
    event Voted(
        address indexed voter,
        address indexed pool,
        uint256 indexed tokenId,
        uint256 weight,
        uint256 totalWeight,
        uint256 timestamp
    );
    event Abstained(
        address indexed voter,
        address indexed pool,
        uint256 indexed tokenId,
        uint256 weight,
        uint256 totalWeight,
        uint256 timestamp
    );
    event NotifyReward(address indexed sender, address indexed reward, uint256 amount);
    event DistributeReward(address indexed sender, address indexed gauge, uint256 amount);
    event WhitelistToken(address indexed whitelister, address indexed token, bool indexed _bool);
    event WhitelistNFT(address indexed whitelister, uint256 indexed tokenId, bool indexed _bool);

    /// @notice Store trusted forwarder address to pass into factories
    function forwarder() external view returns (address);

    /// @notice The ve token that governs these contracts
    function ve() external view returns (address);

    /// @notice Factory registry for valid pool / gauge / rewards factories
    function factoryRegistry() external view returns (address);

    /// @notice Address of Minter.sol
    function minter() external view returns (address);

    /// @notice Standard OZ IGovernor using ve for vote weights.
    function governor() external view returns (address);

    /// @notice Custom Epoch Governor using ve for vote weights.
    function epochGovernor() external view returns (address);

    /// @notice credibly neutral party similar to Curve's Emergency DAO
    function emergencyCouncil() external view returns (address);

    /// @dev Total Voting Weights
    function totalWeight() external view returns (uint256);

    /// @dev Most number of pools one voter can vote for at once
    function maxVotingNum() external view returns (uint256);

    // mappings
    /// @dev Pool => Gauge
    function gauges(address pool) external view returns (address);

    /// @dev Gauge => Pool
    function poolForGauge(address gauge) external view returns (address);

    /// @dev Gauge => Fees Voting Reward
    function gaugeToFees(address gauge) external view returns (address);

    /// @dev Gauge => Bribes Voting Reward
    function gaugeToBribe(address gauge) external view returns (address);

    /// @dev Pool => Weights
    function weights(address pool) external view returns (uint256);

    /// @dev NFT => Pool => Votes
    function votes(uint256 tokenId, address pool) external view returns (uint256);

    /// @dev NFT => Total voting weight of NFT
    function usedWeights(uint256 tokenId) external view returns (uint256);

    /// @dev Nft => Timestamp of last vote (ensures single vote per epoch)
    function lastVoted(uint256 tokenId) external view returns (uint256);

    /// @dev Address => Gauge
    function isGauge(address) external view returns (bool);

    /// @dev Token => Whitelisted status
    function isWhitelistedToken(address token) external view returns (bool);

    /// @dev TokenId => Whitelisted status
    function isWhitelistedNFT(uint256 tokenId) external view returns (bool);

    /// @dev Gauge => Liveness status
    function isAlive(address gauge) external view returns (bool);

    /// @dev Gauge => Amount claimable
    function claimable(address gauge) external view returns (uint256);

    /// @notice Number of pools with a Gauge
    function length() external view returns (uint256);

    /// @notice Called by Minter to distribute weekly emissions rewards for disbursement amongst gauges.
    /// @dev Assumes totalWeight != 0 (Will never be zero as long as users are voting).
    ///      Throws if not called by minter.
    /// @param _amount Amount of rewards to distribute.
    function notifyRewardAmount(uint256 _amount) external;

    /// @dev Utility to distribute to gauges of pools in range _start to _finish.
    /// @param _start   Starting index of gauges to distribute to.
    /// @param _finish  Ending index of gauges to distribute to.
    function distribute(uint256 _start, uint256 _finish) external;

    /// @dev Utility to distribute to gauges of pools in array.
    /// @param _gauges Array of gauges to distribute to.
    function distribute(address[] memory _gauges) external;

    /// @notice Called by users to update voting balances in voting rewards contracts.
    /// @param _tokenId Id of veNFT whose balance you wish to update.
    function poke(uint256 _tokenId) external;

    /// @notice Called by users to vote for pools. Votes distributed proportionally based on weights.
    ///         Can only vote or deposit into a managed NFT once per epoch.
    ///         Can only vote for gauges that have not been killed.
    /// @dev Weights are distributed proportional to the sum of the weights in the array.
    ///      Throws if length of _poolVote and _weights do not match.
    /// @param _tokenId     Id of veNFT you are voting with.
    /// @param _poolVote    Array of pools you are voting for.
    /// @param _weights     Weights of pools.
    function vote(uint256 _tokenId, address[] calldata _poolVote, uint256[] calldata _weights) external;

    /// @notice Called by users to reset voting state. Required if you wish to make changes to
    ///         veNFT state (e.g. merge, split, deposit into managed etc).
    ///         Cannot reset in the same epoch that you voted in.
    ///         Can vote or deposit into a managed NFT again after reset.
    /// @param _tokenId Id of veNFT you are reseting.
    function reset(uint256 _tokenId) external;

    /// @notice Called by users to deposit into a managed NFT.
    ///         Can only vote or deposit into a managed NFT once per epoch.
    ///         Note that NFTs deposited into a managed NFT will be re-locked
    ///         to the maximum lock time on withdrawal.
    /// @dev Throws if not approved or owner.
    ///      Throws if managed NFT is inactive.
    ///      Throws if depositing within privileged window (one hour prior to epoch flip).
    function depositManaged(uint256 _tokenId, uint256 _mTokenId) external;

    /// @notice Called by users to withdraw from a managed NFT.
    ///         Cannot do it in the same epoch that you deposited into a managed NFT.
    ///         Can vote or deposit into a managed NFT again after withdrawing.
    ///         Note that the NFT withdrawn is re-locked to the maximum lock time.
    function withdrawManaged(uint256 _tokenId) external;

    /// @notice Claim emissions from gauges.
    /// @param _gauges Array of gauges to collect emissions from.
    function claimRewards(address[] memory _gauges) external;

    /// @notice Claim bribes for a given NFT.
    /// @dev Utility to help batch bribe claims.
    /// @param _bribes  Array of BribeVotingReward contracts to collect from.
    /// @param _tokens  Array of tokens that are used as bribes.
    /// @param _tokenId Id of veNFT that you wish to claim bribes for.
    function claimBribes(address[] memory _bribes, address[][] memory _tokens, uint256 _tokenId) external;

    /// @notice Claim fees for a given NFT.
    /// @dev Utility to help batch fee claims.
    /// @param _fees    Array of FeesVotingReward contracts to collect from.
    /// @param _tokens  Array of tokens that are used as fees.
    /// @param _tokenId Id of veNFT that you wish to claim fees for.
    function claimFees(address[] memory _fees, address[][] memory _tokens, uint256 _tokenId) external;

    /// @notice Set new governor.
    /// @dev Throws if not called by governor.
    /// @param _governor .
    function setGovernor(address _governor) external;

    /// @notice Set new epoch based governor.
    /// @dev Throws if not called by governor.
    /// @param _epochGovernor .
    function setEpochGovernor(address _epochGovernor) external;

    /// @notice Set new emergency council.
    /// @dev Throws if not called by emergency council.
    /// @param _emergencyCouncil .
    function setEmergencyCouncil(address _emergencyCouncil) external;

    /// @notice Set maximum number of gauges that can be voted for.
    /// @dev Throws if not called by governor.
    ///      Throws if _maxVotingNum is too low.
    ///      Throws if the values are the same.
    /// @param _maxVotingNum .
    function setMaxVotingNum(uint256 _maxVotingNum) external;

    /// @notice Whitelist (or unwhitelist) token for use in bribes.
    /// @dev Throws if not called by governor.
    /// @param _token .
    /// @param _bool .
    function whitelistToken(address _token, bool _bool) external;

    /// @notice Whitelist (or unwhitelist) token id for voting in last hour prior to epoch flip.
    /// @dev Throws if not called by governor.
    ///      Throws if already whitelisted.
    /// @param _tokenId .
    /// @param _bool .
    function whitelistNFT(uint256 _tokenId, bool _bool) external;

    /// @notice Create a new gauge (unpermissioned).
    /// @dev Governor can create a new gauge for a pool with any address.
    /// @param _poolFactory .
    /// @param _pool .
    function createGauge(address _poolFactory, address _pool) external returns (address);

    /// @notice Kills a gauge. The gauge will not receive any new emissions and cannot be deposited into.
    ///         Can still withdraw from gauge.
    /// @dev Throws if not called by emergency council.
    ///      Throws if gauge already killed.
    /// @param _gauge .
    function killGauge(address _gauge) external;

    /// @notice Revives a killed gauge. Gauge will can receive emissions and deposits again.
    /// @dev Throws if not called by emergency council.
    ///      Throws if gauge is not killed.
    /// @param _gauge .
    function reviveGauge(address _gauge) external;

    /// @dev Update claims to emissions for an array of gauges.
    /// @param _gauges Array of gauges to update emissions for.
    function updateFor(address[] memory _gauges) external;

    /// @dev Update claims to emissions for gauges based on their pool id as stored in Voter.
    /// @param _start   Starting index of pools.
    /// @param _end     Ending index of pools.
    function updateFor(uint256 _start, uint256 _end) external;

    /// @dev Update claims to emissions for single gauge
    /// @param _gauge .
    function updateFor(address _gauge) external;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/// Modified IVotes interface for tokenId based voting
interface IVotes {
    /**
     * @dev Emitted when an account changes their delegate.
     */
    event DelegateChanged(address indexed delegator, uint256 indexed fromDelegate, uint256 indexed toDelegate);

    /**
     * @dev Emitted when a token transfer or delegate change results in changes to a delegate's number of votes.
     */
    event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);

    /**
     * @dev Returns the amount of votes that `tokenId` had at a specific moment in the past.
     *      If the account passed in is not the owner, returns 0.
     */
    function getPastVotes(address account, uint256 tokenId, uint256 timepoint) external view returns (uint256);

    /**
     * @dev Returns the total supply of votes available at a specific moment in the past. If the `clock()` is
     * configured to use block numbers, this will return the value the end of the corresponding block.
     *
     * NOTE: This value is the sum of all available votes, which is not necessarily the sum of all delegated votes.
     * Votes that have not been delegated are still part of total supply, even though they would not participate in a
     * vote.
     */
    function getPastTotalSupply(uint256 timepoint) external view returns (uint256);

    /**
     * @dev Returns the delegate that `tokenId` has chosen. Can never be equal to the delegator's `tokenId`.
     *      Returns 0 if not delegated.
     */
    function delegates(uint256 tokenId) external view returns (uint256);

    /**
     * @dev Delegates votes from the sender to `delegatee`.
     */
    function delegate(uint256 delegator, uint256 delegatee) external;

    /**
     * @dev Delegates votes from `delegator` to `delegatee`. Signer must own `delegator`.
     */
    function delegateBySig(
        uint256 delegator,
        uint256 delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC165, IERC721, IERC721Metadata} from "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import {IERC6372} from "@openzeppelin/contracts/interfaces/IERC6372.sol";
import {IERC4906} from "@openzeppelin/contracts/interfaces/IERC4906.sol";
import {IVotes} from "../governance/IVotes.sol";

interface IVotingEscrow is IVotes, IERC4906, IERC6372, IERC721Metadata {
    struct LockedBalance {
        int128 amount;
        uint256 end;
        bool isPermanent;
    }

    struct UserPoint {
        int128 bias;
        int128 slope; // # -dweight / dt
        uint256 ts;
        uint256 blk; // block
        uint256 permanent;
    }

    struct GlobalPoint {
        int128 bias;
        int128 slope; // # -dweight / dt
        uint256 ts;
        uint256 blk; // block
        uint256 permanentLockBalance;
    }

    /// @notice A checkpoint for recorded delegated voting weights at a certain timestamp
    struct Checkpoint {
        uint256 fromTimestamp;
        address owner;
        uint256 delegatedBalance;
        uint256 delegatee;
    }

    enum DepositType {
        DEPOSIT_FOR_TYPE,
        CREATE_LOCK_TYPE,
        INCREASE_LOCK_AMOUNT,
        INCREASE_UNLOCK_TIME
    }

    /// @dev Different types of veNFTs:
    /// NORMAL  - typical veNFT
    /// LOCKED  - veNFT which is locked into a MANAGED veNFT
    /// MANAGED - veNFT which can accept the deposit of NORMAL veNFTs
    enum EscrowType {
        NORMAL,
        LOCKED,
        MANAGED
    }

    error AlreadyVoted();
    error AmountTooBig();
    error ERC721ReceiverRejectedTokens();
    error ERC721TransferToNonERC721ReceiverImplementer();
    error InvalidNonce();
    error InvalidSignature();
    error InvalidSignatureS();
    error InvalidManagedNFTId();
    error LockDurationNotInFuture();
    error LockDurationTooLong();
    error LockExpired();
    error LockNotExpired();
    error NoLockFound();
    error NonExistentToken();
    error NotApprovedOrOwner();
    error NotDistributor();
    error NotEmergencyCouncilOrGovernor();
    error NotGovernor();
    error NotGovernorOrManager();
    error NotManagedNFT();
    error NotManagedOrNormalNFT();
    error NotLockedNFT();
    error NotNormalNFT();
    error NotPermanentLock();
    error NotOwner();
    error NotTeam();
    error NotVoter();
    error OwnershipChange();
    error PermanentLock();
    error SameAddress();
    error SameNFT();
    error SameState();
    error SplitNoOwner();
    error SplitNotAllowed();
    error SignatureExpired();
    error TooManyTokenIDs();
    error ZeroAddress();
    error ZeroAmount();
    error ZeroBalance();

    event Deposit(
        address indexed provider,
        uint256 indexed tokenId,
        DepositType indexed depositType,
        uint256 value,
        uint256 locktime,
        uint256 ts
    );
    event Withdraw(address indexed provider, uint256 indexed tokenId, uint256 value, uint256 ts);
    event LockPermanent(address indexed _owner, uint256 indexed _tokenId, uint256 amount, uint256 _ts);
    event UnlockPermanent(address indexed _owner, uint256 indexed _tokenId, uint256 amount, uint256 _ts);
    event Supply(uint256 prevSupply, uint256 supply);
    event Merge(
        address indexed _sender,
        uint256 indexed _from,
        uint256 indexed _to,
        uint256 _amountFrom,
        uint256 _amountTo,
        uint256 _amountFinal,
        uint256 _locktime,
        uint256 _ts
    );
    event Split(
        uint256 indexed _from,
        uint256 indexed _tokenId1,
        uint256 indexed _tokenId2,
        address _sender,
        uint256 _splitAmount1,
        uint256 _splitAmount2,
        uint256 _locktime,
        uint256 _ts
    );
    event CreateManaged(
        address indexed _to,
        uint256 indexed _mTokenId,
        address indexed _from,
        address _lockedManagedReward,
        address _freeManagedReward
    );
    event DepositManaged(
        address indexed _owner,
        uint256 indexed _tokenId,
        uint256 indexed _mTokenId,
        uint256 _weight,
        uint256 _ts
    );
    event WithdrawManaged(
        address indexed _owner,
        uint256 indexed _tokenId,
        uint256 indexed _mTokenId,
        uint256 _weight,
        uint256 _ts
    );
    event SetAllowedManager(address indexed _allowedManager);

    // State variables
    /// @notice Address of Meta-tx Forwarder
    function forwarder() external view returns (address);

    /// @notice Address of FactoryRegistry.sol
    function factoryRegistry() external view returns (address);

    /// @notice Address of token (AERO) used to create a veNFT
    function token() external view returns (address);

    /// @notice Address of RewardsDistributor.sol
    function distributor() external view returns (address);

    /// @notice Address of Voter.sol
    function voter() external view returns (address);

    /// @notice Address of Protocol Team multisig
    function team() external view returns (address);

    /// @notice Address of art proxy used for on-chain art generation
    function artProxy() external view returns (address);

    /// @dev address which can create managed NFTs
    function allowedManager() external view returns (address);

    /// @dev Current count of token
    function tokenId() external view returns (uint256);

    /*///////////////////////////////////////////////////////////////
                            MANAGED NFT STORAGE
    //////////////////////////////////////////////////////////////*/

    /// @dev Mapping of token id to escrow type
    ///      Takes advantage of the fact default value is EscrowType.NORMAL
    function escrowType(uint256 tokenId) external view returns (EscrowType);

    /// @dev Mapping of token id to managed id
    function idToManaged(uint256 tokenId) external view returns (uint256 managedTokenId);

    /// @dev Mapping of user token id to managed token id to weight of token id
    function weights(uint256 tokenId, uint256 managedTokenId) external view returns (uint256 weight);

    /// @dev Mapping of managed id to deactivated state
    function deactivated(uint256 tokenId) external view returns (bool inactive);

    /// @dev Mapping from managed nft id to locked managed rewards
    ///      `token` denominated rewards (rebases/rewards) stored in locked managed rewards contract
    ///      to prevent co-mingling of assets
    function managedToLocked(uint256 tokenId) external view returns (address);

    /// @dev Mapping from managed nft id to free managed rewards contract
    ///      these rewards can be freely withdrawn by users
    function managedToFree(uint256 tokenId) external view returns (address);

    /*///////////////////////////////////////////////////////////////
                            MANAGED NFT LOGIC
    //////////////////////////////////////////////////////////////*/

    /// @notice Create managed NFT (a permanent lock) for use within ecosystem.
    /// @dev Throws if address already owns a managed NFT.
    /// @return _mTokenId managed token id.
    function createManagedLockFor(address _to) external returns (uint256 _mTokenId);

    /// @notice Delegates balance to managed nft
    ///         Note that NFTs deposited into a managed NFT will be re-locked
    ///         to the maximum lock time on withdrawal.
    ///         Permanent locks that are deposited will automatically unlock.
    /// @dev Managed nft will remain max-locked as long as there is at least one
    ///      deposit or withdrawal per week.
    ///      Throws if deposit nft is managed.
    ///      Throws if recipient nft is not managed.
    ///      Throws if deposit nft is already locked.
    ///      Throws if not called by voter.
    /// @param _tokenId tokenId of NFT being deposited
    /// @param _mTokenId tokenId of managed NFT that will receive the deposit
    function depositManaged(uint256 _tokenId, uint256 _mTokenId) external;

    /// @notice Retrieves locked rewards and withdraws balance from managed nft.
    ///         Note that the NFT withdrawn is re-locked to the maximum lock time.
    /// @dev Throws if NFT not locked.
    ///      Throws if not called by voter.
    /// @param _tokenId tokenId of NFT being deposited.
    function withdrawManaged(uint256 _tokenId) external;

    /// @notice Permit one address to call createManagedLockFor() that is not Voter.governor()
    function setAllowedManager(address _allowedManager) external;

    /// @notice Set Managed NFT state. Inactive NFTs cannot be deposited into.
    /// @param _mTokenId managed nft state to set
    /// @param _state true => inactive, false => active
    function setManagedState(uint256 _mTokenId, bool _state) external;

    /*///////////////////////////////////////////////////////////////
                             METADATA STORAGE
    //////////////////////////////////////////////////////////////*/

    function name() external view returns (string memory);

    function symbol() external view returns (string memory);

    function version() external view returns (string memory);

    function decimals() external view returns (uint8);

    function setTeam(address _team) external;

    function setArtProxy(address _proxy) external;

    /// @inheritdoc IERC721Metadata
    function tokenURI(uint256 tokenId) external view returns (string memory);

    /*//////////////////////////////////////////////////////////////
                      ERC721 BALANCE/OWNER STORAGE
    //////////////////////////////////////////////////////////////*/

    /// @dev Mapping from owner address to mapping of index to tokenId
    function ownerToNFTokenIdList(address _owner, uint256 _index) external view returns (uint256 _tokenId);

    /// @inheritdoc IERC721
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /// @inheritdoc IERC721
    function balanceOf(address owner) external view returns (uint256 balance);

    /*//////////////////////////////////////////////////////////////
                         ERC721 APPROVAL STORAGE
    //////////////////////////////////////////////////////////////*/

    /// @inheritdoc IERC721
    function getApproved(uint256 _tokenId) external view returns (address operator);

    /// @inheritdoc IERC721
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /// @notice Check whether spender is owner or an approved user for a given veNFT
    /// @param _spender .
    /// @param _tokenId .
    function isApprovedOrOwner(address _spender, uint256 _tokenId) external returns (bool);

    /*//////////////////////////////////////////////////////////////
                              ERC721 LOGIC
    //////////////////////////////////////////////////////////////*/

    /// @inheritdoc IERC721
    function approve(address to, uint256 tokenId) external;

    /// @inheritdoc IERC721
    function setApprovalForAll(address operator, bool approved) external;

    /// @inheritdoc IERC721
    function transferFrom(address from, address to, uint256 tokenId) external;

    /// @inheritdoc IERC721
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /// @inheritdoc IERC721
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /*//////////////////////////////////////////////////////////////
                              ERC165 LOGIC
    //////////////////////////////////////////////////////////////*/

    /// @inheritdoc IERC165
    function supportsInterface(bytes4 _interfaceID) external view returns (bool);

    /*//////////////////////////////////////////////////////////////
                             ESCROW STORAGE
    //////////////////////////////////////////////////////////////*/

    /// @notice Total count of epochs witnessed since contract creation
    function epoch() external view returns (uint256);

    /// @notice Total amount of token() deposited
    function supply() external view returns (uint256);

    /// @notice Aggregate permanent locked balances
    function permanentLockBalance() external view returns (uint256);

    function userPointEpoch(uint256 _tokenId) external view returns (uint256 _epoch);

    /// @notice time -> signed slope change
    function slopeChanges(uint256 _timestamp) external view returns (int128);

    /// @notice account -> can split
    function canSplit(address _account) external view returns (bool);

    /// @notice Global point history at a given index
    function pointHistory(uint256 _loc) external view returns (GlobalPoint memory);

    /// @notice Get the LockedBalance (amount, end) of a _tokenId
    /// @param _tokenId .
    /// @return LockedBalance of _tokenId
    function locked(uint256 _tokenId) external view returns (LockedBalance memory);

    /// @notice User -> UserPoint[userEpoch]
    function userPointHistory(uint256 _tokenId, uint256 _loc) external view returns (UserPoint memory);

    /*//////////////////////////////////////////////////////////////
                              ESCROW LOGIC
    //////////////////////////////////////////////////////////////*/

    /// @notice Record global data to checkpoint
    function checkpoint() external;

    /// @notice Deposit `_value` tokens for `_tokenId` and add to the lock
    /// @dev Anyone (even a smart contract) can deposit for someone else, but
    ///      cannot extend their locktime and deposit for a brand new user
    /// @param _tokenId lock NFT
    /// @param _value Amount to add to user's lock
    function depositFor(uint256 _tokenId, uint256 _value) external;

    /// @notice Deposit `_value` tokens for `msg.sender` and lock for `_lockDuration`
    /// @param _value Amount to deposit
    /// @param _lockDuration Number of seconds to lock tokens for (rounded down to nearest week)
    /// @return TokenId of created veNFT
    function createLock(uint256 _value, uint256 _lockDuration) external returns (uint256);

    /// @notice Deposit `_value` tokens for `_to` and lock for `_lockDuration`
    /// @param _value Amount to deposit
    /// @param _lockDuration Number of seconds to lock tokens for (rounded down to nearest week)
    /// @param _to Address to deposit
    /// @return TokenId of created veNFT
    function createLockFor(uint256 _value, uint256 _lockDuration, address _to) external returns (uint256);

    /// @notice Deposit `_value` additional tokens for `_tokenId` without modifying the unlock time
    /// @param _value Amount of tokens to deposit and add to the lock
    function increaseAmount(uint256 _tokenId, uint256 _value) external;

    /// @notice Extend the unlock time for `_tokenId`
    ///         Cannot extend lock time of permanent locks
    /// @param _lockDuration New number of seconds until tokens unlock
    function increaseUnlockTime(uint256 _tokenId, uint256 _lockDuration) external;

    /// @notice Withdraw all tokens for `_tokenId`
    /// @dev Only possible if the lock is both expired and not permanent
    ///      This will burn the veNFT. Any rebases or rewards that are unclaimed
    ///      will no longer be claimable. Claim all rebases and rewards prior to calling this.
    function withdraw(uint256 _tokenId) external;

    /// @notice Merges `_from` into `_to`.
    /// @dev Cannot merge `_from` locks that are permanent or have already voted this epoch.
    ///      Cannot merge `_to` locks that have already expired.
    ///      This will burn the veNFT. Any rebases or rewards that are unclaimed
    ///      will no longer be claimable. Claim all rebases and rewards prior to calling this.
    /// @param _from VeNFT to merge from.
    /// @param _to VeNFT to merge into.
    function merge(uint256 _from, uint256 _to) external;

    /// @notice Splits veNFT into two new veNFTS - one with oldLocked.amount - `_amount`, and the second with `_amount`
    /// @dev    This burns the tokenId of the target veNFT
    ///         Callable by approved or owner
    ///         If this is called by approved, approved will not have permissions to manipulate the newly created veNFTs
    ///         Returns the two new split veNFTs to owner
    ///         If `from` is permanent, will automatically dedelegate.
    ///         This will burn the veNFT. Any rebases or rewards that are unclaimed
    ///         will no longer be claimable. Claim all rebases and rewards prior to calling this.
    /// @param _from VeNFT to split.
    /// @param _amount Amount to split from veNFT.
    /// @return _tokenId1 Return tokenId of veNFT with oldLocked.amount - `_amount`.
    /// @return _tokenId2 Return tokenId of veNFT with `_amount`.
    function split(uint256 _from, uint256 _amount) external returns (uint256 _tokenId1, uint256 _tokenId2);

    /// @notice Toggle split for a specific address.
    /// @dev Toggle split for address(0) to enable or disable for all.
    /// @param _account Address to toggle split permissions
    /// @param _bool True to allow, false to disallow
    function toggleSplit(address _account, bool _bool) external;

    /// @notice Permanently lock a veNFT. Voting power will be equal to
    ///         `LockedBalance.amount` with no decay. Required to delegate.
    /// @dev Only callable by unlocked normal veNFTs.
    /// @param _tokenId tokenId to lock.
    function lockPermanent(uint256 _tokenId) external;

    /// @notice Unlock a permanently locked veNFT. Voting power will decay.
    ///         Will automatically dedelegate if delegated.
    /// @dev Only callable by permanently locked veNFTs.
    ///      Cannot unlock if already voted this epoch.
    /// @param _tokenId tokenId to unlock.
    function unlockPermanent(uint256 _tokenId) external;

    /*///////////////////////////////////////////////////////////////
                           GAUGE VOTING STORAGE
    //////////////////////////////////////////////////////////////*/

    /// @notice Get the voting power for _tokenId at the current timestamp
    /// @dev Returns 0 if called in the same block as a transfer.
    /// @param _tokenId .
    /// @return Voting power
    function balanceOfNFT(uint256 _tokenId) external view returns (uint256);

    /// @notice Get the voting power for _tokenId at a given timestamp
    /// @param _tokenId .
    /// @param _t Timestamp to query voting power
    /// @return Voting power
    function balanceOfNFTAt(uint256 _tokenId, uint256 _t) external view returns (uint256);

    /// @notice Calculate total voting power at current timestamp
    /// @return Total voting power at current timestamp
    function totalSupply() external view returns (uint256);

    /// @notice Calculate total voting power at a given timestamp
    /// @param _t Timestamp to query total voting power
    /// @return Total voting power at given timestamp
    function totalSupplyAt(uint256 _t) external view returns (uint256);

    /*///////////////////////////////////////////////////////////////
                            GAUGE VOTING LOGIC
    //////////////////////////////////////////////////////////////*/

    /// @notice See if a queried _tokenId has actively voted
    /// @param _tokenId .
    /// @return True if voted, else false
    function voted(uint256 _tokenId) external view returns (bool);

    /// @notice Set the global state voter and distributor
    /// @dev This is only called once, at setup
    function setVoterAndDistributor(address _voter, address _distributor) external;

    /// @notice Set `voted` for _tokenId to true or false
    /// @dev Only callable by voter
    /// @param _tokenId .
    /// @param _voted .
    function voting(uint256 _tokenId, bool _voted) external;

    /*///////////////////////////////////////////////////////////////
                            DAO VOTING STORAGE
    //////////////////////////////////////////////////////////////*/

    /// @notice The number of checkpoints for each tokenId
    function numCheckpoints(uint256 tokenId) external view returns (uint48);

    /// @notice A record of states for signing / validating signatures
    function nonces(address account) external view returns (uint256);

    /// @inheritdoc IVotes
    function delegates(uint256 delegator) external view returns (uint256);

    /// @notice A record of delegated token checkpoints for each account, by index
    /// @param tokenId .
    /// @param index .
    /// @return Checkpoint
    function checkpoints(uint256 tokenId, uint48 index) external view returns (Checkpoint memory);

    /// @inheritdoc IVotes
    function getPastVotes(address account, uint256 tokenId, uint256 timestamp) external view returns (uint256);

    /// @inheritdoc IVotes
    function getPastTotalSupply(uint256 timestamp) external view returns (uint256);

    /*///////////////////////////////////////////////////////////////
                             DAO VOTING LOGIC
    //////////////////////////////////////////////////////////////*/

    /// @inheritdoc IVotes
    function delegate(uint256 delegator, uint256 delegatee) external;

    /// @inheritdoc IVotes
    function delegateBySig(
        uint256 delegator,
        uint256 delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /*//////////////////////////////////////////////////////////////
                              ERC6372 LOGIC
    //////////////////////////////////////////////////////////////*/

    /// @inheritdoc IERC6372
    function clock() external view returns (uint48);

    /// @inheritdoc IERC6372
    function CLOCK_MODE() external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.19;

library ProtocolTimeLibrary {
    uint256 internal constant WEEK = 7 days;

    /// @dev Returns start of epoch based on current timestamp
    function epochStart(uint256 timestamp) internal pure returns (uint256) {
        unchecked {
            return timestamp - (timestamp % WEEK);
        }
    }

    /// @dev Returns start of next epoch / end of current epoch
    function epochNext(uint256 timestamp) internal pure returns (uint256) {
        unchecked {
            return timestamp - (timestamp % WEEK) + WEEK;
        }
    }

    /// @dev Returns start of voting window
    function epochVoteStart(uint256 timestamp) internal pure returns (uint256) {
        unchecked {
            return timestamp - (timestamp % WEEK) + 1 hours;
        }
    }

    /// @dev Returns end of voting window / beginning of unrestricted voting window
    function epochVoteEnd(uint256 timestamp) internal pure returns (uint256) {
        unchecked {
            return timestamp - (timestamp % WEEK) + WEEK - 1 hours;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

{
  "compilationTarget": {
    "contracts/gauges/Gauge.sol": "Gauge"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [
    ":@opengsn/=lib/gsn/packages/",
    ":@openzeppelin/=lib/openzeppelin-contracts/",
    ":@uniswap/v3-core/=lib/v3-core/",
    ":ds-test/=lib/ds-test/src/",
    ":erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    ":eth-gas-reporter/=node_modules/eth-gas-reporter/",
    ":forge-std/=lib/forge-std/src/",
    ":gsn/=lib/gsn/",
    ":hardhat-deploy/=node_modules/hardhat-deploy/",
    ":hardhat/=node_modules/hardhat/",
    ":openzeppelin-contracts/=lib/openzeppelin-contracts/",
    ":utils/=test/utils/",
    ":v3-core/=lib/v3-core/"
  ]
}