// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   *
   * [IMPORTANT]
   * ====
   * You shouldn't rely on `isContract` to protect against flash loan attacks!
   *
   * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
   * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
   * constructor.
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize/address.code.length, which returns 0
    // for contracts in construction, since the code is only stored at the end
    // of the constructor execution.

    return account.code.length > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, "Address: insufficient balance");

    (bool success, ) = recipient.call{value: amount}("");
    require(success, "Address: unable to send value, recipient may have reverted");
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, "Address: low-level call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, "Address: insufficient balance for call");
    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
    return functionStaticCall(target, data, "Address: low-level static call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, "Address: low-level delegate call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
   * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
   *
   * _Available since v4.8._
   */
  function verifyCallResultFromTarget(
    address target,
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    if (success) {
      if (returndata.length == 0) {
        // only check isContract if the call was successful and the return data is empty
        // otherwise we already know that it was a contract
        require(isContract(target), "Address: call to non-contract");
      }
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  /**
   * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason or using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  function _revert(bytes memory returndata, string memory errorMessage) private pure {
    // Look for revert reason and bubble it up if present
    if (returndata.length > 0) {
      // The easiest way to bubble the revert reason is using memory via assembly
      /// @solidity memory-safe-assembly
      assembly {
        let returndata_size := mload(returndata)
        revert(add(32, returndata), returndata_size)
      }
    } else {
      revert(errorMessage);
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IBurnMintERC20} from "../ERC20/IBurnMintERC20.sol";
import {IERC677} from "./IERC677.sol";

import {ERC677} from "./ERC677.sol";
import {OwnerIsCreator} from "../../access/OwnerIsCreator.sol";

import {ERC20Burnable} from "../../../vendor/openzeppelin-solidity/v4.8.0/contracts/token/ERC20/extensions/ERC20Burnable.sol";
import {EnumerableSet} from "../../../vendor/openzeppelin-solidity/v4.8.0/contracts/utils/structs/EnumerableSet.sol";
import {IERC165} from "../../../vendor/openzeppelin-solidity/v4.8.0/contracts/utils/introspection/IERC165.sol";
import {IERC20} from "../../../vendor/openzeppelin-solidity/v4.8.0/contracts/token/ERC20/IERC20.sol";

/// @notice A basic ERC677 compatible token contract with burn and minting roles.
/// @dev The total supply can be limited during deployment.
contract BurnMintERC677 is IBurnMintERC20, ERC677, IERC165, ERC20Burnable, OwnerIsCreator {
  using EnumerableSet for EnumerableSet.AddressSet;

  error SenderNotMinter(address sender);
  error SenderNotBurner(address sender);
  error MaxSupplyExceeded(uint256 supplyAfterMint);

  event MintAccessGranted(address indexed minter);
  event BurnAccessGranted(address indexed burner);
  event MintAccessRevoked(address indexed minter);
  event BurnAccessRevoked(address indexed burner);

  // @dev the allowed minter addresses
  EnumerableSet.AddressSet internal s_minters;
  // @dev the allowed burner addresses
  EnumerableSet.AddressSet internal s_burners;

  /// @dev The number of decimals for the token
  uint8 internal immutable i_decimals;

  /// @dev The maximum supply of the token, 0 if unlimited
  uint256 internal immutable i_maxSupply;

  constructor(string memory name, string memory symbol, uint8 decimals_, uint256 maxSupply_) ERC677(name, symbol) {
    i_decimals = decimals_;
    i_maxSupply = maxSupply_;
  }

  function supportsInterface(bytes4 interfaceId) public pure virtual override returns (bool) {
    return
      interfaceId == type(IERC20).interfaceId ||
      interfaceId == type(IERC677).interfaceId ||
      interfaceId == type(IBurnMintERC20).interfaceId ||
      interfaceId == type(IERC165).interfaceId;
  }

  // ================================================================
  // |                            ERC20                             |
  // ================================================================

  /// @dev Returns the number of decimals used in its user representation.
  function decimals() public view virtual override returns (uint8) {
    return i_decimals;
  }

  /// @dev Returns the max supply of the token, 0 if unlimited.
  function maxSupply() public view virtual returns (uint256) {
    return i_maxSupply;
  }

  /// @dev Uses OZ ERC20 _transfer to disallow sending to address(0).
  /// @dev Disallows sending to address(this)
  function _transfer(address from, address to, uint256 amount) internal virtual override validAddress(to) {
    super._transfer(from, to, amount);
  }

  /// @dev Uses OZ ERC20 _approve to disallow approving for address(0).
  /// @dev Disallows approving for address(this)
  function _approve(address owner, address spender, uint256 amount) internal virtual override validAddress(spender) {
    super._approve(owner, spender, amount);
  }

  /// @dev Exists to be backwards compatible with the older naming convention.
  function decreaseApproval(address spender, uint256 subtractedValue) external returns (bool success) {
    return decreaseAllowance(spender, subtractedValue);
  }

  /// @dev Exists to be backwards compatible with the older naming convention.
  function increaseApproval(address spender, uint256 addedValue) external {
    increaseAllowance(spender, addedValue);
  }

  /// @notice Check if recipient is valid (not this contract address).
  /// @param recipient the account we transfer/approve to.
  /// @dev Reverts with an empty revert to be compatible with the existing link token when
  /// the recipient is this contract address.
  modifier validAddress(address recipient) virtual {
    if (recipient == address(this)) revert();
    _;
  }

  // ================================================================
  // |                      Burning & minting                       |
  // ================================================================

  /// @inheritdoc ERC20Burnable
  /// @dev Uses OZ ERC20 _burn to disallow burning from address(0).
  /// @dev Decreases the total supply.
  function burn(uint256 amount) public override(IBurnMintERC20, ERC20Burnable) onlyBurner {
    super.burn(amount);
  }

  /// @inheritdoc IBurnMintERC20
  /// @dev Alias for BurnFrom for compatibility with the older naming convention.
  /// @dev Uses burnFrom for all validation & logic.
  function burn(address account, uint256 amount) public virtual override {
    burnFrom(account, amount);
  }

  /// @inheritdoc ERC20Burnable
  /// @dev Uses OZ ERC20 _burn to disallow burning from address(0).
  /// @dev Decreases the total supply.
  function burnFrom(address account, uint256 amount) public override(IBurnMintERC20, ERC20Burnable) onlyBurner {
    super.burnFrom(account, amount);
  }

  /// @inheritdoc IBurnMintERC20
  /// @dev Uses OZ ERC20 _mint to disallow minting to address(0).
  /// @dev Disallows minting to address(this)
  /// @dev Increases the total supply.
  function mint(address account, uint256 amount) external override onlyMinter validAddress(account) {
    if (i_maxSupply != 0 && totalSupply() + amount > i_maxSupply) revert MaxSupplyExceeded(totalSupply() + amount);

    _mint(account, amount);
  }

  // ================================================================
  // |                            Roles                             |
  // ================================================================

  /// @notice grants both mint and burn roles to `burnAndMinter`.
  /// @dev calls public functions so this function does not require
  /// access controls. This is handled in the inner functions.
  function grantMintAndBurnRoles(address burnAndMinter) external {
    grantMintRole(burnAndMinter);
    grantBurnRole(burnAndMinter);
  }

  /// @notice Grants mint role to the given address.
  /// @dev only the owner can call this function.
  function grantMintRole(address minter) public onlyOwner {
    if (s_minters.add(minter)) {
      emit MintAccessGranted(minter);
    }
  }

  /// @notice Grants burn role to the given address.
  /// @dev only the owner can call this function.
  function grantBurnRole(address burner) public onlyOwner {
    if (s_burners.add(burner)) {
      emit BurnAccessGranted(burner);
    }
  }

  /// @notice Revokes mint role for the given address.
  /// @dev only the owner can call this function.
  function revokeMintRole(address minter) public onlyOwner {
    if (s_minters.remove(minter)) {
      emit MintAccessRevoked(minter);
    }
  }

  /// @notice Revokes burn role from the given address.
  /// @dev only the owner can call this function
  function revokeBurnRole(address burner) public onlyOwner {
    if (s_burners.remove(burner)) {
      emit BurnAccessRevoked(burner);
    }
  }

  /// @notice Returns all permissioned minters
  function getMinters() public view returns (address[] memory) {
    return s_minters.values();
  }

  /// @notice Returns all permissioned burners
  function getBurners() public view returns (address[] memory) {
    return s_burners.values();
  }

  // ================================================================
  // |                            Access                            |
  // ================================================================

  /// @notice Checks whether a given address is a minter for this token.
  /// @return true if the address is allowed to mint.
  function isMinter(address minter) public view returns (bool) {
    return s_minters.contains(minter);
  }

  /// @notice Checks whether a given address is a burner for this token.
  /// @return true if the address is allowed to burn.
  function isBurner(address burner) public view returns (bool) {
    return s_burners.contains(burner);
  }

  /// @notice Checks whether the msg.sender is a permissioned minter for this token
  /// @dev Reverts with a SenderNotMinter if the check fails
  modifier onlyMinter() {
    if (!isMinter(msg.sender)) revert SenderNotMinter(msg.sender);
    _;
  }

  /// @notice Checks whether the msg.sender is a permissioned burner for this token
  /// @dev Reverts with a SenderNotBurner if the check fails
  modifier onlyBurner() {
    if (!isBurner(msg.sender)) revert SenderNotBurner(msg.sender);
    _;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "./ConfirmedOwnerWithProposal.sol";

/**
 * @title The ConfirmedOwner contract
 * @notice A contract with helpers for basic contract ownership.
 */
contract ConfirmedOwner is ConfirmedOwnerWithProposal {
  constructor(address newOwner) ConfirmedOwnerWithProposal(newOwner, address(0)) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "../interfaces/IOwnable.sol";

/**
 * @title The ConfirmedOwner contract
 * @notice A contract with helpers for basic contract ownership.
 */
contract ConfirmedOwnerWithProposal is IOwnable {
  address private s_owner;
  address private s_pendingOwner;

  event OwnershipTransferRequested(address indexed from, address indexed to);
  event OwnershipTransferred(address indexed from, address indexed to);

  constructor(address newOwner, address pendingOwner) {
    require(newOwner != address(0), "Cannot set owner to zero");

    s_owner = newOwner;
    if (pendingOwner != address(0)) {
      _transferOwnership(pendingOwner);
    }
  }

  /**
   * @notice Allows an owner to begin transferring ownership to a new address,
   * pending.
   */
  function transferOwnership(address to) public override onlyOwner {
    _transferOwnership(to);
  }

  /**
   * @notice Allows an ownership transfer to be completed by the recipient.
   */
  function acceptOwnership() external override {
    require(msg.sender == s_pendingOwner, "Must be proposed owner");

    address oldOwner = s_owner;
    s_owner = msg.sender;
    s_pendingOwner = address(0);

    emit OwnershipTransferred(oldOwner, msg.sender);
  }

  /**
   * @notice Get the current owner
   */
  function owner() public view override returns (address) {
    return s_owner;
  }

  /**
   * @notice validate, transfer ownership, and emit relevant events
   */
  function _transferOwnership(address to) private {
    require(to != msg.sender, "Cannot transfer to self");

    s_pendingOwner = to;

    emit OwnershipTransferRequested(s_owner, to);
  }

  /**
   * @notice validate access
   */
  function _validateOwnership() internal view {
    require(msg.sender == s_owner, "Only callable by owner");
  }

  /**
   * @notice Reverts if called by anyone other than the contract owner.
   */
  modifier onlyOwner() {
    _validateOwnership();
    _;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes calldata) {
    return msg.data;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {BurnMintERC677} from "@chainlink/contracts-ccip/src/v0.8/shared/token/ERC677/BurnMintERC677.sol";

contract DipBurnMint is BurnMintERC677 {
    constructor(
        string memory name,
        string memory symbol,
        uint8 decimals_,
        uint256 maxSupply_
    ) BurnMintERC677(name, symbol, decimals_, maxSupply_) {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
  mapping(address => uint256) private _balances;

  mapping(address => mapping(address => uint256)) private _allowances;

  uint256 private _totalSupply;

  string private _name;
  string private _symbol;

  /**
   * @dev Sets the values for {name} and {symbol}.
   *
   * The default value of {decimals} is 18. To select a different value for
   * {decimals} you should overload it.
   *
   * All two of these values are immutable: they can only be set once during
   * construction.
   */
  constructor(string memory name_, string memory symbol_) {
    _name = name_;
    _symbol = symbol_;
  }

  /**
   * @dev Returns the name of the token.
   */
  function name() public view virtual override returns (string memory) {
    return _name;
  }

  /**
   * @dev Returns the symbol of the token, usually a shorter version of the
   * name.
   */
  function symbol() public view virtual override returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Returns the number of decimals used to get its user representation.
   * For example, if `decimals` equals `2`, a balance of `505` tokens should
   * be displayed to a user as `5.05` (`505 / 10 ** 2`).
   *
   * Tokens usually opt for a value of 18, imitating the relationship between
   * Ether and Wei. This is the value {ERC20} uses, unless this function is
   * overridden;
   *
   * NOTE: This information is only used for _display_ purposes: it in
   * no way affects any of the arithmetic of the contract, including
   * {IERC20-balanceOf} and {IERC20-transfer}.
   */
  function decimals() public view virtual override returns (uint8) {
    return 18;
  }

  /**
   * @dev See {IERC20-totalSupply}.
   */
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }

  /**
   * @dev See {IERC20-balanceOf}.
   */
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _balances[account];
  }

  /**
   * @dev See {IERC20-transfer}.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - the caller must have a balance of at least `amount`.
   */
  function transfer(address to, uint256 amount) public virtual override returns (bool) {
    address owner = _msgSender();
    _transfer(owner, to, amount);
    return true;
  }

  /**
   * @dev See {IERC20-allowance}.
   */
  function allowance(address owner, address spender) public view virtual override returns (uint256) {
    return _allowances[owner][spender];
  }

  /**
   * @dev See {IERC20-approve}.
   *
   * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
   * `transferFrom`. This is semantically equivalent to an infinite approval.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function approve(address spender, uint256 amount) public virtual override returns (bool) {
    address owner = _msgSender();
    _approve(owner, spender, amount);
    return true;
  }

  /**
   * @dev See {IERC20-transferFrom}.
   *
   * Emits an {Approval} event indicating the updated allowance. This is not
   * required by the EIP. See the note at the beginning of {ERC20}.
   *
   * NOTE: Does not update the allowance if the current allowance
   * is the maximum `uint256`.
   *
   * Requirements:
   *
   * - `from` and `to` cannot be the zero address.
   * - `from` must have a balance of at least `amount`.
   * - the caller must have allowance for ``from``'s tokens of at least
   * `amount`.
   */
  function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {
    address spender = _msgSender();
    _spendAllowance(from, spender, amount);
    _transfer(from, to, amount);
    return true;
  }

  /**
   * @dev Atomically increases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
    address owner = _msgSender();
    _approve(owner, spender, allowance(owner, spender) + addedValue);
    return true;
  }

  /**
   * @dev Atomically decreases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `spender` must have allowance for the caller of at least
   * `subtractedValue`.
   */
  function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
    address owner = _msgSender();
    uint256 currentAllowance = allowance(owner, spender);
    require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
    unchecked {
      _approve(owner, spender, currentAllowance - subtractedValue);
    }

    return true;
  }

  /**
   * @dev Moves `amount` of tokens from `from` to `to`.
   *
   * This internal function is equivalent to {transfer}, and can be used to
   * e.g. implement automatic token fees, slashing mechanisms, etc.
   *
   * Emits a {Transfer} event.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `from` must have a balance of at least `amount`.
   */
  function _transfer(address from, address to, uint256 amount) internal virtual {
    require(from != address(0), "ERC20: transfer from the zero address");
    require(to != address(0), "ERC20: transfer to the zero address");

    _beforeTokenTransfer(from, to, amount);

    uint256 fromBalance = _balances[from];
    require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
    unchecked {
      _balances[from] = fromBalance - amount;
      // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
      // decrementing then incrementing.
      _balances[to] += amount;
    }

    emit Transfer(from, to, amount);

    _afterTokenTransfer(from, to, amount);
  }

  /** @dev Creates `amount` tokens and assigns them to `account`, increasing
   * the total supply.
   *
   * Emits a {Transfer} event with `from` set to the zero address.
   *
   * Requirements:
   *
   * - `account` cannot be the zero address.
   */
  function _mint(address account, uint256 amount) internal virtual {
    require(account != address(0), "ERC20: mint to the zero address");

    _beforeTokenTransfer(address(0), account, amount);

    _totalSupply += amount;
    unchecked {
      // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
      _balances[account] += amount;
    }
    emit Transfer(address(0), account, amount);

    _afterTokenTransfer(address(0), account, amount);
  }

  /**
   * @dev Destroys `amount` tokens from `account`, reducing the
   * total supply.
   *
   * Emits a {Transfer} event with `to` set to the zero address.
   *
   * Requirements:
   *
   * - `account` cannot be the zero address.
   * - `account` must have at least `amount` tokens.
   */
  function _burn(address account, uint256 amount) internal virtual {
    require(account != address(0), "ERC20: burn from the zero address");

    _beforeTokenTransfer(account, address(0), amount);

    uint256 accountBalance = _balances[account];
    require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
    unchecked {
      _balances[account] = accountBalance - amount;
      // Overflow not possible: amount <= accountBalance <= totalSupply.
      _totalSupply -= amount;
    }

    emit Transfer(account, address(0), amount);

    _afterTokenTransfer(account, address(0), amount);
  }

  /**
   * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
   *
   * This internal function is equivalent to `approve`, and can be used to
   * e.g. set automatic allowances for certain subsystems, etc.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `owner` cannot be the zero address.
   * - `spender` cannot be the zero address.
   */
  function _approve(address owner, address spender, uint256 amount) internal virtual {
    require(owner != address(0), "ERC20: approve from the zero address");
    require(spender != address(0), "ERC20: approve to the zero address");

    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  /**
   * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
   *
   * Does not update the allowance amount in case of infinite allowance.
   * Revert if not enough allowance is available.
   *
   * Might emit an {Approval} event.
   */
  function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {
    uint256 currentAllowance = allowance(owner, spender);
    if (currentAllowance != type(uint256).max) {
      require(currentAllowance >= amount, "ERC20: insufficient allowance");
      unchecked {
        _approve(owner, spender, currentAllowance - amount);
      }
    }
  }

  /**
   * @dev Hook that is called before any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * will be transferred to `to`.
   * - when `from` is zero, `amount` tokens will be minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}

  /**
   * @dev Hook that is called after any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * has been transferred to `to`.
   * - when `from` is zero, `amount` tokens have been minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.0;

import "../ERC20.sol";
import "../../../utils/Context.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
  /**
   * @dev Destroys `amount` tokens from the caller.
   *
   * See {ERC20-_burn}.
   */
  function burn(uint256 amount) public virtual {
    _burn(_msgSender(), amount);
  }

  /**
   * @dev Destroys `amount` tokens from `account`, deducting from the caller's
   * allowance.
   *
   * See {ERC20-_burn} and {ERC20-allowance}.
   *
   * Requirements:
   *
   * - the caller must have allowance for ``accounts``'s tokens of at least
   * `amount`.
   */
  function burnFrom(address account, uint256 amount) public virtual {
    _spendAllowance(account, _msgSender(), amount);
    _burn(account, amount);
  }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;

import {IERC677} from "./IERC677.sol";
import {IERC677Receiver} from "./IERC677Receiver.sol";

import {Address} from "../../../vendor/openzeppelin-solidity/v4.8.0/contracts/utils/Address.sol";
import {ERC20} from "../../../vendor/openzeppelin-solidity/v4.8.0/contracts/token/ERC20/ERC20.sol";

contract ERC677 is IERC677, ERC20 {
  using Address for address;

  constructor(string memory name, string memory symbol) ERC20(name, symbol) {}

  /// @inheritdoc IERC677
  function transferAndCall(address to, uint amount, bytes memory data) public returns (bool success) {
    super.transfer(to, amount);
    emit Transfer(msg.sender, to, amount, data);
    if (to.isContract()) {
      IERC677Receiver(to).onTokenTransfer(msg.sender, amount, data);
    }
    return true;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
  // To implement this library for multiple types with as little code
  // repetition as possible, we write it in terms of a generic Set type with
  // bytes32 values.
  // The Set implementation uses private functions, and user-facing
  // implementations (such as AddressSet) are just wrappers around the
  // underlying Set.
  // This means that we can only create new EnumerableSets for types that fit
  // in bytes32.

  struct Set {
    // Storage of set values
    bytes32[] _values;
    // Position of the value in the `values` array, plus 1 because index 0
    // means a value is not in the set.
    mapping(bytes32 => uint256) _indexes;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function _add(Set storage set, bytes32 value) private returns (bool) {
    if (!_contains(set, value)) {
      set._values.push(value);
      // The value is stored at length-1, but we add 1 to all indexes
      // and use 0 as a sentinel value
      set._indexes[value] = set._values.length;
      return true;
    } else {
      return false;
    }
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function _remove(Set storage set, bytes32 value) private returns (bool) {
    // We read and store the value's index to prevent multiple reads from the same storage slot
    uint256 valueIndex = set._indexes[value];

    if (valueIndex != 0) {
      // Equivalent to contains(set, value)
      // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
      // the array, and then remove the last element (sometimes called as 'swap and pop').
      // This modifies the order of the array, as noted in {at}.

      uint256 toDeleteIndex = valueIndex - 1;
      uint256 lastIndex = set._values.length - 1;

      if (lastIndex != toDeleteIndex) {
        bytes32 lastValue = set._values[lastIndex];

        // Move the last value to the index where the value to delete is
        set._values[toDeleteIndex] = lastValue;
        // Update the index for the moved value
        set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
      }

      // Delete the slot where the moved value was stored
      set._values.pop();

      // Delete the index for the deleted slot
      delete set._indexes[value];

      return true;
    } else {
      return false;
    }
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function _contains(Set storage set, bytes32 value) private view returns (bool) {
    return set._indexes[value] != 0;
  }

  /**
   * @dev Returns the number of values on the set. O(1).
   */
  function _length(Set storage set) private view returns (uint256) {
    return set._values.length;
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function _at(Set storage set, uint256 index) private view returns (bytes32) {
    return set._values[index];
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function _values(Set storage set) private view returns (bytes32[] memory) {
    return set._values;
  }

  // Bytes32Set

  struct Bytes32Set {
    Set _inner;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
    return _add(set._inner, value);
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
    return _remove(set._inner, value);
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
    return _contains(set._inner, value);
  }

  /**
   * @dev Returns the number of values in the set. O(1).
   */
  function length(Bytes32Set storage set) internal view returns (uint256) {
    return _length(set._inner);
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
    return _at(set._inner, index);
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
    bytes32[] memory store = _values(set._inner);
    bytes32[] memory result;

    /// @solidity memory-safe-assembly
    assembly {
      result := store
    }

    return result;
  }

  // AddressSet

  struct AddressSet {
    Set _inner;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function add(AddressSet storage set, address value) internal returns (bool) {
    return _add(set._inner, bytes32(uint256(uint160(value))));
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function remove(AddressSet storage set, address value) internal returns (bool) {
    return _remove(set._inner, bytes32(uint256(uint160(value))));
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function contains(AddressSet storage set, address value) internal view returns (bool) {
    return _contains(set._inner, bytes32(uint256(uint160(value))));
  }

  /**
   * @dev Returns the number of values in the set. O(1).
   */
  function length(AddressSet storage set) internal view returns (uint256) {
    return _length(set._inner);
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function at(AddressSet storage set, uint256 index) internal view returns (address) {
    return address(uint160(uint256(_at(set._inner, index))));
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function values(AddressSet storage set) internal view returns (address[] memory) {
    bytes32[] memory store = _values(set._inner);
    address[] memory result;

    /// @solidity memory-safe-assembly
    assembly {
      result := store
    }

    return result;
  }

  // UintSet

  struct UintSet {
    Set _inner;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function add(UintSet storage set, uint256 value) internal returns (bool) {
    return _add(set._inner, bytes32(value));
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function remove(UintSet storage set, uint256 value) internal returns (bool) {
    return _remove(set._inner, bytes32(value));
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function contains(UintSet storage set, uint256 value) internal view returns (bool) {
    return _contains(set._inner, bytes32(value));
  }

  /**
   * @dev Returns the number of values in the set. O(1).
   */
  function length(UintSet storage set) internal view returns (uint256) {
    return _length(set._inner);
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function at(UintSet storage set, uint256 index) internal view returns (uint256) {
    return uint256(_at(set._inner, index));
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function values(UintSet storage set) internal view returns (uint256[] memory) {
    bytes32[] memory store = _values(set._inner);
    uint256[] memory result;

    /// @solidity memory-safe-assembly
    assembly {
      result := store
    }

    return result;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20} from "../../../vendor/openzeppelin-solidity/v4.8.0/contracts/token/ERC20/IERC20.sol";

interface IBurnMintERC20 is IERC20 {
  /// @notice Mints new tokens for a given address.
  /// @param account The address to mint the new tokens to.
  /// @param amount The number of tokens to be minted.
  /// @dev this function increases the total supply.
  function mint(address account, uint256 amount) external;

  /// @notice Burns tokens from the sender.
  /// @param amount The number of tokens to be burned.
  /// @dev this function decreases the total supply.
  function burn(uint256 amount) external;

  /// @notice Burns tokens from a given address..
  /// @param account The address to burn tokens from.
  /// @param amount The number of tokens to be burned.
  /// @dev this function decreases the total supply.
  function burn(address account, uint256 amount) external;

  /// @notice Burns tokens from a given address..
  /// @param account The address to burn tokens from.
  /// @param amount The number of tokens to be burned.
  /// @dev this function decreases the total supply.
  function burnFrom(address account, uint256 amount) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);

  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `from` to `to` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
  /**
   * @dev Returns the name of the token.
   */
  function name() external view returns (string memory);

  /**
   * @dev Returns the symbol of the token.
   */
  function symbol() external view returns (string memory);

  /**
   * @dev Returns the decimals places of the token.
   */
  function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IERC677 {
  event Transfer(address indexed from, address indexed to, uint256 value, bytes data);

  /// @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
  /// @param to The address which you want to transfer to
  /// @param amount The amount of tokens to be transferred
  /// @param data bytes Additional data with no specified format, sent in call to `to`
  /// @return true unless throwing
  function transferAndCall(address to, uint256 amount, bytes memory data) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IERC677Receiver {
  function onTokenTransfer(address sender, uint256 amount, bytes calldata data) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IOwnable {
  function owner() external returns (address);

  function transferOwnership(address recipient) external;

  function acceptOwnership() external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfirmedOwner} from "./ConfirmedOwner.sol";

/// @title The OwnerIsCreator contract
/// @notice A contract with helpers for basic contract ownership.
contract OwnerIsCreator is ConfirmedOwner {
  constructor() ConfirmedOwner(msg.sender) {}
}

{
  "compilationTarget": {
    "contracts/DipBurnMint.sol": "DipBurnMint"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}