// File: contracts/ERC721/ERC721ReceiverDraft.sol

pragma solidity ^0.5.10;


/// @title ERC721ReceiverDraft
/// @dev Interface for any contract that wants to support safeTransfers from
///  ERC721 asset contracts.
/// @dev Note: this is the interface defined from 
///  https://github.com/ethereum/EIPs/commit/2bddd126def7c046e1e62408dc2b51bdd9e57f0f
///  to https://github.com/ethereum/EIPs/commit/27788131d5975daacbab607076f2ee04624f9dbb 
///  and is not the final interface.
///  Due to the extended period of time this revision was specified in the draft,
///  we are supporting both this and the newer (final) interface in order to be 
///  compatible with any ERC721 implementations that may have used this interface.
contract ERC721ReceiverDraft {

    /// @dev Magic value to be returned upon successful reception of an NFT
    ///  Equals to `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`,
    ///  which can be also obtained as `ERC721ReceiverDraft(0).onERC721Received.selector`
    /// @dev see https://github.com/ethereum/EIPs/commit/2bddd126def7c046e1e62408dc2b51bdd9e57f0f
    bytes4 internal constant ERC721_RECEIVED_DRAFT = 0xf0b9e5ba;

    /// @notice Handle the receipt of an NFT
    /// @dev The ERC721 smart contract calls this function on the recipient
    ///  after a `transfer`. This function MAY throw to revert and reject the
    ///  transfer. This function MUST use 50,000 gas or less. Return of other
    ///  than the magic value MUST result in the transaction being reverted.
    ///  Note: the contract address is always the message sender.
    /// @param _from The sending address 
    /// @param _tokenId The NFT identifier which is being transfered
    /// @param data Additional data with no specified format
    /// @return `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`
    ///  unless throwing
    function onERC721Received(address _from, uint256 _tokenId, bytes calldata data) external returns(bytes4);
}

// File: contracts/ERC721/ERC721ReceiverFinal.sol

pragma solidity ^0.5.10;


/// @title ERC721ReceiverFinal
/// @notice Interface for any contract that wants to support safeTransfers from
///  ERC721 asset contracts.
///  @dev Note: this is the final interface as defined at http://erc721.org
contract ERC721ReceiverFinal {

    /// @dev Magic value to be returned upon successful reception of an NFT
    ///  Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`,
    ///  which can be also obtained as `ERC721ReceiverFinal(0).onERC721Received.selector`
    /// @dev see https://github.com/OpenZeppelin/openzeppelin-solidity/blob/v1.12.0/contracts/token/ERC721/ERC721Receiver.sol
    bytes4 internal constant ERC721_RECEIVED_FINAL = 0x150b7a02;

    /// @notice Handle the receipt of an NFT
    /// @dev The ERC721 smart contract calls this function on the recipient
    /// after a `safetransfer`. This function MAY throw to revert and reject the
    /// transfer. Return of other than the magic value MUST result in the
    /// transaction being reverted.
    /// Note: the contract address is always the message sender.
    /// @param _operator The address which called `safeTransferFrom` function
    /// @param _from The address which previously owned the token
    /// @param _tokenId The NFT identifier which is being transferred
    /// @param _data Additional data with no specified format
    /// @return `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
    function onERC721Received(
        address _operator,
        address _from,
        uint256 _tokenId,
        bytes memory _data
    )
    public
        returns (bytes4);
}

// File: contracts/ERC721/ERC721Receivable.sol

pragma solidity ^0.5.10;



/// @title ERC721Receivable handles the reception of ERC721 tokens
///  See ERC721 specification
/// @author Christopher Scott
/// @dev These functions are public, and could be called by anyone, even in the case
///  where no NFTs have been transferred. Since it's not a reliable source of
///  truth about ERC721 tokens being transferred, we save the gas and don't
///  bother emitting a (potentially spurious) event as found in 
///  https://github.com/OpenZeppelin/openzeppelin-solidity/blob/5471fc808a17342d738853d7bf3e9e5ef3108074/contracts/mocks/ERC721ReceiverMock.sol
contract ERC721Receivable is ERC721ReceiverDraft, ERC721ReceiverFinal {

    /// @notice Handle the receipt of an NFT
    /// @dev The ERC721 smart contract calls this function on the recipient
    ///  after a `transfer`. This function MAY throw to revert and reject the
    ///  transfer. This function MUST use 50,000 gas or less. Return of other
    ///  than the magic value MUST result in the transaction being reverted.
    ///  Note: the contract address is always the message sender.
    /// @param _from The sending address 
    /// @param _tokenId The NFT identifier which is being transfered
    /// @param data Additional data with no specified format
    /// @return `bytes4(keccak256("onERC721Received(address,uint256,bytes)"))`
    ///  unless throwing
    function onERC721Received(address _from, uint256 _tokenId, bytes calldata data) external returns(bytes4) {
        _from;
        _tokenId;
        data;

        // emit ERC721Received(_operator, _from, _tokenId, _data, gasleft());

        return ERC721_RECEIVED_DRAFT;
    }

    /// @notice Handle the receipt of an NFT
    /// @dev The ERC721 smart contract calls this function on the recipient
    /// after a `safetransfer`. This function MAY throw to revert and reject the
    /// transfer. Return of other than the magic value MUST result in the
    /// transaction being reverted.
    /// Note: the contract address is always the message sender.
    /// @param _operator The address which called `safeTransferFrom` function
    /// @param _from The address which previously owned the token
    /// @param _tokenId The NFT identifier which is being transferred
    /// @param _data Additional data with no specified format
    /// @return `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
    function onERC721Received(
        address _operator,
        address _from,
        uint256 _tokenId,
        bytes memory _data
    )
        public
        returns(bytes4)
    {
        _operator;
        _from;
        _tokenId;
        _data;

        // emit ERC721Received(_operator, _from, _tokenId, _data, gasleft());

        return ERC721_RECEIVED_FINAL;
    }

}

// File: contracts/ERC223/ERC223Receiver.sol

pragma solidity ^0.5.10;


/// @title ERC223Receiver ensures we are ERC223 compatible
/// @author Christopher Scott
contract ERC223Receiver {
    
    bytes4 public constant ERC223_ID = 0xc0ee0b8a;

    struct TKN {
        address sender;
        uint value;
        bytes data;
        bytes4 sig;
    }
    
    /// @notice tokenFallback is called from an ERC223 compatible contract
    /// @param _from the address from which the token was sent
    /// @param _value the amount of tokens sent
    /// @param _data the data sent with the transaction
    function tokenFallback(address _from, uint _value, bytes memory _data) public pure {
        _from;
        _value;
        _data;
    //   TKN memory tkn;
    //   tkn.sender = _from;
    //   tkn.value = _value;
    //   tkn.data = _data;
    //   uint32 u = uint32(_data[3]) + (uint32(_data[2]) << 8) + (uint32(_data[1]) << 16) + (uint32(_data[0]) << 24);
    //   tkn.sig = bytes4(u);
      
      /* tkn variable is analogue of msg variable of Ether transaction
      *  tkn.sender is person who initiated this token transaction   (analogue of msg.sender)
      *  tkn.value the number of tokens that were sent   (analogue of msg.value)
      *  tkn.data is data of token transaction   (analogue of msg.data)
      *  tkn.sig is 4 bytes signature of function
      *  if data of token transaction is a function execution
      */

    }
}

// File: contracts/ERC1271/ERC1271.sol

pragma solidity ^0.5.10;

contract ERC1271 {

    /// @dev bytes4(keccak256("isValidSignature(bytes32,bytes)")
    bytes4 internal constant ERC1271_VALIDSIGNATURE = 0x1626ba7e;

    /// @dev Should return whether the signature provided is valid for the provided data
    /// @param hash 32-byte hash of the data that is signed
    /// @param _signature Signature byte array associated with _data
    ///  MUST return the bytes4 magic value 0x1626ba7e when function passes.
    ///  MUST NOT modify state (using STATICCALL for solc < 0.5, view modifier for solc > 0.5)
    ///  MUST allow external calls
    function isValidSignature(
        bytes32 hash, 
        bytes calldata _signature)
        external
        view 
        returns (bytes4);
}

// File: contracts/ECDSA.sol

pragma solidity ^0.5.10;


/// @title ECDSA is a library that contains useful methods for working with ECDSA signatures
library ECDSA {

    /// @notice Extracts the r, s, and v components from the `sigData` field starting from the `offset`
    /// @dev Note: does not do any bounds checking on the arguments!
    /// @param sigData the signature data; could be 1 or more packed signatures.
    /// @param offset the offset in sigData from which to start unpacking the signature components.
    function extractSignature(bytes memory sigData, uint256 offset) internal pure returns  (bytes32 r, bytes32 s, uint8 v) {
        // Divide the signature in r, s and v variables
        // ecrecover takes the signature parameters, and the only way to get them
        // currently is to use assembly.
        // solium-disable-next-line security/no-inline-assembly
        assembly {
             let dataPointer := add(sigData, offset)
             r := mload(add(dataPointer, 0x20))
             s := mload(add(dataPointer, 0x40))
             v := byte(0, mload(add(dataPointer, 0x60)))
        }
    
        return (r, s, v);
    }
}

// File: contracts/Wallet/CoreWallet.sol

pragma solidity ^0.5.10;






/// @title Core Wallet
/// @notice A basic smart contract wallet with cosigner functionality. The notion of "cosigner" is
///  the simplest possible multisig solution, a two-of-two signature scheme. It devolves nicely
///  to "one-of-one" (i.e. singlesig) by simply having the cosigner set to the same value as
///  the main signer.
/// 
///  Most "advanced" functionality (deadman's switch, multiday recovery flows, blacklisting, etc)
///  can be implemented externally to this smart contract, either as an additional smart contract
///  (which can be tracked as a signer without cosigner, or as a cosigner) or as an off-chain flow
///  using a public/private key pair as cosigner. Of course, the basic cosigning functionality could
///  also be implemented in this way, but (A) the complexity and gas cost of two-of-two multisig (as
///  implemented here) is negligable even if you don't need the cosigner functionality, and
///  (B) two-of-two multisig (as implemented here) handles a lot of really common use cases, most
///  notably third-party gas payment and off-chain blacklisting and fraud detection.
contract CoreWallet is ERC721Receivable, ERC223Receiver, ERC1271 {

    using ECDSA for bytes;

    /// @notice We require that presigned transactions use the EIP-191 signing format.
    ///  See that EIP for more info: https://github.com/ethereum/EIPs/blob/master/EIPS/eip-191.md
    byte public constant EIP191_VERSION_DATA = byte(0);
    byte public constant EIP191_PREFIX = byte(0x19);

    /// @notice This is the version of the contract.
    string public constant VERSION = "1.1.0";

    /// @notice This is a sentinel value used to determine when a delegate is set to expose 
    ///  support for an interface containing more than a single function. See `delegates` and
    ///  `setDelegate` for more information.
    address public constant COMPOSITE_PLACEHOLDER = address(1);

    /// @notice A pre-shifted "1", used to increment the authVersion, so we can "prepend"
    ///  the authVersion to an address (for lookups in the authorizations mapping)
    ///  by using the '+' operator (which is cheaper than a shift and a mask). See the
    ///  comment on the `authorizations` variable for how this is used.
    uint256 public constant AUTH_VERSION_INCREMENTOR = (1 << 160);
    
    /// @notice The pre-shifted authVersion (to get the current authVersion as an integer,
    ///  shift this value right by 160 bits). Starts as `1 << 160` (`AUTH_VERSION_INCREMENTOR`)
    ///  See the comment on the `authorizations` variable for how this is used.
    uint256 public authVersion;

    /// @notice A mapping containing all of the addresses that are currently authorized to manage
    ///  the assets owned by this wallet.
    ///
    ///  The keys in this mapping are authorized addresses with a version number prepended,
    ///  like so: (authVersion,96)(address,160). The current authVersion MUST BE included
    ///  for each look-up; this allows us to effectively clear the entire mapping of its
    ///  contents merely by incrementing the authVersion variable. (This is important for
    ///  the emergencyRecovery() method.) Inspired by https://ethereum.stackexchange.com/a/42540
    ///
    ///  The values in this mapping are 256bit words, whose lower 20 bytes constitute "cosigners"
    ///  for each address. If an address maps to itself, then that address is said to have no cosigner.
    ///
    ///  The upper 12 bytes are reserved for future meta-data purposes.  The meta-data could refer
    ///  to the key (authorized address) or the value (cosigner) of the mapping.
    ///
    ///  Addresses that map to a non-zero cosigner in the current authVersion are called
    ///  "authorized addresses".
    mapping(uint256 => uint256) public authorizations;

    /// @notice A per-key nonce value, incremented each time a transaction is processed with that key.
    ///  Used for replay prevention. The nonce value in the transaction must exactly equal the current
    ///  nonce value in the wallet for that key. (This mirrors the way Ethereum's transaction nonce works.)
    mapping(address => uint256) public nonces;

    /// @notice A mapping tracking dynamically supported interfaces and their corresponding
    ///  implementation contracts. Keys are interface IDs and values are addresses of
    ///  contracts that are responsible for implementing the function corresponding to the
    ///  interface.
    ///  
    ///  Delegates are added (or removed) via the `setDelegate` method after the contract is
    ///  deployed, allowing support for new interfaces to be dynamically added after deployment.
    ///  When a delegate is added, its interface ID is considered "supported" under EIP165. 
    ///
    ///  For cases where an interface composed of more than a single function must be
    ///  supported, it is necessary to manually add the composite interface ID with 
    ///  `setDelegate(interfaceId, COMPOSITE_PLACEHOLDER)`. Interface IDs added with the
    ///  COMPOSITE_PLACEHOLDER address are ignored when called and are only used to specify
    ///  supported interfaces.
    mapping(bytes4 => address) public delegates;

    /// @notice A special address that is authorized to call `emergencyRecovery()`. That function
    ///  resets ALL authorization for this wallet, and must therefore be treated with utmost security.
    ///  Reasonable choices for recoveryAddress include:
    ///       - the address of a private key in cold storage
    ///       - a physically secured hardware wallet
    ///       - a multisig smart contract, possibly with a time-delayed challenge period
    ///       - the zero address, if you like performing without a safety net ;-)
    address public recoveryAddress;

    /// @notice Used to track whether or not this contract instance has been initialized. This
    ///  is necessary since it is common for this wallet smart contract to be used as the "library
    ///  code" for an clone contract. See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1167.md
    ///  for more information about clone contracts.
    bool public initialized;
    
    /// @notice Used to decorate methods that can only be called directly by the recovery address.
    modifier onlyRecoveryAddress() {
        require(msg.sender == recoveryAddress, "sender must be recovery address");
        _;
    }

    /// @notice Used to decorate the `init` function so this can only be called one time. Necessary
    ///  since this contract will often be used as a "clone". (See above.)
    modifier onlyOnce() {
        require(!initialized, "must not already be initialized");
        initialized = true;
        _;
    }
    
    /// @notice Used to decorate methods that can only be called indirectly via an `invoke()` method.
    ///  In practice, it means that those methods can only be called by a signer/cosigner
    ///  pair that is currently authorized. Theoretically, we could factor out the
    ///  signer/cosigner verification code and use it explicitly in this modifier, but that
    ///  would either result in duplicated code, or additional overhead in the invoke()
    ///  calls (due to the stack manipulation for calling into the shared verification function).
    ///  Doing it this way makes calling the administration functions more expensive (since they
    ///  go through a explicit call() instead of just branching within the contract), but it
    ///  makes invoke() more efficient. We assume that invoke() will be used much, much more often
    ///  than any of the administration functions.
    modifier onlyInvoked() {
        require(msg.sender == address(this), "must be called from `invoke()`");
        _;
    }
    
    /// @notice Emitted when an authorized address is added, removed, or modified. When an
    ///  authorized address is removed ("deauthorized"), cosigner will be address(0) in
    ///  this event.
    ///  
    ///  NOTE: When emergencyRecovery() is called, all existing addresses are deauthorized
    ///  WITHOUT Authorized(addr, 0) being emitted. If you are keeping an off-chain mirror of
    ///  authorized addresses, you must also watch for EmergencyRecovery events.
    /// @dev hash is 0xf5a7f4fb8a92356e8c8c4ae7ac3589908381450500a7e2fd08c95600021ee889
    /// @param authorizedAddress the address to authorize or unauthorize
    /// @param cosigner the 2-of-2 signatory (optional).
    event Authorized(address authorizedAddress, uint256 cosigner);
    
    /// @notice Emitted when an emergency recovery has been performed. If this event is fired,
    ///  ALL previously authorized addresses have been deauthorized and the only authorized
    ///  address is the authorizedAddress indicated in this event.
    /// @dev hash is 0xe12d0bbeb1d06d7a728031056557140afac35616f594ef4be227b5b172a604b5
    /// @param authorizedAddress the new authorized address
    /// @param cosigner the cosigning address for `authorizedAddress`
    event EmergencyRecovery(address authorizedAddress, uint256 cosigner);

    /// @notice Emitted when the recovery address changes. Either (but not both) of the
    ///  parameters may be zero.
    /// @dev hash is 0x568ab3dedd6121f0385e007e641e74e1f49d0fa69cab2957b0b07c4c7de5abb6
    /// @param previousRecoveryAddress the previous recovery address
    /// @param newRecoveryAddress the new recovery address
    event RecoveryAddressChanged(address previousRecoveryAddress, address newRecoveryAddress);

    /// @dev Emitted when this contract receives a non-zero amount ether via the fallback function
    ///  (i.e. This event is not fired if the contract receives ether as part of a method invocation)
    /// @param from the address which sent you ether
    /// @param value the amount of ether sent
    event Received(address from, uint value);

    /// @notice Emitted whenever a transaction is processed successfully from this wallet. Includes
    ///  both simple send ether transactions, as well as other smart contract invocations.
    /// @dev hash is 0x101214446435ebbb29893f3348e3aae5ea070b63037a3df346d09d3396a34aee
    /// @param hash The hash of the entire operation set. 0 is returned when emitted from `invoke0()`.
    /// @param result A bitfield of the results of the operations. A bit of 0 means success, and 1 means failure.
    /// @param numOperations A count of the number of operations processed
    event InvocationSuccess(
        bytes32 hash,
        uint256 result,
        uint256 numOperations
    );

    /// @notice Emitted when a delegate is added or removed.
    /// @param interfaceId The interface ID as specified by EIP165
    /// @param delegate The address of the contract implementing the given function. If this is
    ///  COMPOSITE_PLACEHOLDER, we are indicating support for a composite interface.
    event DelegateUpdated(bytes4 interfaceId, address delegate);

    /// @notice The shared initialization code used to setup the contract state regardless of whether or
    ///  not the clone pattern is being used.
    /// @param _authorizedAddress the initial authorized address, must not be zero!
    /// @param _cosigner the initial cosigning address for `_authorizedAddress`, can be equal to `_authorizedAddress`
    /// @param _recoveryAddress the initial recovery address for the wallet, can be address(0)
    function init(address _authorizedAddress, uint256 _cosigner, address _recoveryAddress) public onlyOnce {
        require(_authorizedAddress != _recoveryAddress, "Do not use the recovery address as an authorized address.");
        require(address(_cosigner) != _recoveryAddress, "Do not use the recovery address as a cosigner.");
        require(_authorizedAddress != address(0), "Authorized addresses must not be zero.");
        require(address(_cosigner) != address(0), "Initial cosigner must not be zero.");
        
        recoveryAddress = _recoveryAddress;
        // set initial authorization value
        authVersion = AUTH_VERSION_INCREMENTOR;
        // add initial authorized address
        authorizations[authVersion + uint256(_authorizedAddress)] = _cosigner;
        
        emit Authorized(_authorizedAddress, _cosigner);
    }

    /// @notice The fallback function, invoked whenever we receive a transaction that doesn't call any of our
    ///  named functions. In particular, this method is called when we are the target of a simple send
    ///  transaction, when someone calls a method we have dynamically added a delegate for, or when someone
    ///  tries to call a function we don't implement, either statically or dynamically.
    ///
    ///  A correct invocation of this method occurs in two cases:
    ///  - someone transfers ETH to this wallet (`msg.data.length` is  0)
    ///  - someone calls a delegated function (`msg.data.length` is greater than 0 and
    ///    `delegates[msg.sig]` is set) 
    ///  In all other cases, this function will revert.
    ///
    ///  NOTE: Some smart contracts send 0 eth as part of a more complex operation
    ///  (-cough- CryptoKitties -cough-); ideally, we'd `require(msg.value > 0)` here when
    ///  `msg.data.length == 0`, but to work with those kinds of smart contracts, we accept zero sends
    ///  and just skip logging in that case.
    function() external payable {
        if (msg.value > 0) {
            emit Received(msg.sender, msg.value);
        }
        if (msg.data.length > 0) {
            address delegate = delegates[msg.sig]; 
            require(delegate > COMPOSITE_PLACEHOLDER, "Invalid transaction");

            // We have found a delegate contract that is responsible for the method signature of
            // this call. Now, pass along the calldata of this CALL to the delegate contract.  
            assembly {
                calldatacopy(0, 0, calldatasize())
                let result := staticcall(gas, delegate, 0, calldatasize(), 0, 0)
                returndatacopy(0, 0, returndatasize())

                // If the delegate reverts, we revert. If the delegate does not revert, we return the data
                // returned by the delegate to the original caller.
                switch result 
                case 0 {
                    revert(0, returndatasize())
                } 
                default {
                    return(0, returndatasize())
                }
            } 
        }    
    }

    /// @notice Adds or removes dynamic support for an interface. Can be used in 3 ways:
    ///   - Add a contract "delegate" that implements a single function
    ///   - Remove delegate for a function
    ///   - Specify that an interface ID is "supported", without adding a delegate. This is
    ///     used for composite interfaces when the interface ID is not a single method ID.
    /// @dev Must be called through `invoke`
    /// @param _interfaceId The ID of the interface we are adding support for
    /// @param _delegate Either:
    ///    - the address of a contract that implements the function specified by `_interfaceId`
    ///      for adding an implementation for a single function
    ///    - 0 for removing an existing delegate
    ///    - COMPOSITE_PLACEHOLDER for specifying support for a composite interface
    function setDelegate(bytes4 _interfaceId, address _delegate) external onlyInvoked {
        delegates[_interfaceId] = _delegate;
        emit DelegateUpdated(_interfaceId, _delegate);
    }
    
    /// @notice Configures an authorizable address. Can be used in four ways:
    ///   - Add a new signer/cosigner pair (cosigner must be non-zero)
    ///   - Set or change the cosigner for an existing signer (if authorizedAddress != cosigner)
    ///   - Remove the cosigning requirement for a signer (if authorizedAddress == cosigner)
    ///   - Remove a signer (if cosigner == address(0))
    /// @dev Must be called through `invoke()`
    /// @param _authorizedAddress the address to configure authorization
    /// @param _cosigner the corresponding cosigning address
    function setAuthorized(address _authorizedAddress, uint256 _cosigner) external onlyInvoked {
        // TODO: Allowing a signer to remove itself is actually pretty terrible; it could result in the user
        //  removing their only available authorized key. Unfortunately, due to how the invocation forwarding
        //  works, we don't actually _know_ which signer was used to call this method, so there's no easy way
        //  to prevent this.
        
        // TODO: Allowing the backup key to be set as an authorized address bypasses the recovery mechanisms.
        //  Dapper can prevent this with offchain logic and the cosigner, but it would be nice to have 
        //  this enforced by the smart contract logic itself.
        
        require(_authorizedAddress != address(0), "Authorized addresses must not be zero.");
        require(_authorizedAddress != recoveryAddress, "Do not use the recovery address as an authorized address.");
        require(address(_cosigner) == address(0) || address(_cosigner) != recoveryAddress, "Do not use the recovery address as a cosigner.");
 
        authorizations[authVersion + uint256(_authorizedAddress)] = _cosigner;
        emit Authorized(_authorizedAddress, _cosigner);
    }
    
    /// @notice Performs an emergency recovery operation, removing all existing authorizations and setting
    ///  a sole new authorized address with optional cosigner. THIS IS A SCORCHED EARTH SOLUTION, and great
    ///  care should be taken to ensure that this method is never called unless it is a last resort. See the
    ///  comments above about the proper kinds of addresses to use as the recoveryAddress to ensure this method
    ///  is not trivially abused.
    /// @param _authorizedAddress the new and sole authorized address
    /// @param _cosigner the corresponding cosigner address, can be equal to _authorizedAddress
    function emergencyRecovery(address _authorizedAddress, uint256 _cosigner) external onlyRecoveryAddress {
        require(_authorizedAddress != address(0), "Authorized addresses must not be zero.");
        require(_authorizedAddress != recoveryAddress, "Do not use the recovery address as an authorized address.");
        require(address(_cosigner) != address(0), "The cosigner must not be zero.");

        // Incrementing the authVersion number effectively erases the authorizations mapping. See the comments
        // on the authorizations variable (above) for more information.
        authVersion += AUTH_VERSION_INCREMENTOR;

        // Store the new signer/cosigner pair as the only remaining authorized address
        authorizations[authVersion + uint256(_authorizedAddress)] = _cosigner;
        emit EmergencyRecovery(_authorizedAddress, _cosigner);
    }

    /// @notice Sets the recovery address, which can be zero (indicating that no recovery is possible)
    ///  Can be updated by any authorized address. This address should be set with GREAT CARE. See the
    ///  comments above about the proper kinds of addresses to use as the recoveryAddress to ensure this
    ///  mechanism is not trivially abused.
    /// @dev Must be called through `invoke()`
    /// @param _recoveryAddress the new recovery address
    function setRecoveryAddress(address _recoveryAddress) external onlyInvoked {
        require(
            address(authorizations[authVersion + uint256(_recoveryAddress)]) == address(0),
            "Do not use an authorized address as the recovery address."
        );
 
        address previous = recoveryAddress;
        recoveryAddress = _recoveryAddress;

        emit RecoveryAddressChanged(previous, recoveryAddress);
    }

    /// @notice Allows ANY caller to recover gas by way of deleting old authorization keys after
    ///  a recovery operation. Anyone can call this method to delete the old unused storage and
    ///  get themselves a bit of gas refund in the bargin.
    /// @dev keys must be known to caller or else nothing is refunded
    /// @param _version the version of the mapping which you want to delete (unshifted)
    /// @param _keys the authorization keys to delete 
    function recoverGas(uint256 _version, address[] calldata _keys) external {
        // TODO: should this be 0xffffffffffffffffffffffff ?
        require(_version > 0 && _version < 0xffffffff, "Invalid version number.");
        
        uint256 shiftedVersion = _version << 160;

        require(shiftedVersion < authVersion, "You can only recover gas from expired authVersions.");

        for (uint256 i = 0; i < _keys.length; ++i) {
            delete(authorizations[shiftedVersion + uint256(_keys[i])]);
        }
    }

    /// @notice Should return whether the signature provided is valid for the provided data
    ///  See https://github.com/ethereum/EIPs/issues/1271
    /// @dev This function meets the following conditions as per the EIP:
    ///  MUST return the bytes4 magic value `0x1626ba7e` when function passes.
    ///  MUST NOT modify state (using `STATICCALL` for solc < 0.5, `view` modifier for solc > 0.5)
    ///  MUST allow external calls
    /// @param hash A 32 byte hash of the signed data.  The actual hash that is hashed however is the
    ///  the following tightly packed arguments: `0x19,0x0,wallet_address,hash`
    /// @param _signature Signature byte array associated with `_data`
    /// @return Magic value `0x1626ba7e` upon success, 0 otherwise.
    function isValidSignature(bytes32 hash, bytes calldata _signature) external view returns (bytes4) {
        
        // We 'hash the hash' for the following reasons:
        // 1. `hash` is not the hash of an Ethereum transaction
        // 2. signature must target this wallet to avoid replaying the signature for another wallet
        // with the same key
        // 3. Gnosis does something similar: 
        // https://github.com/gnosis/safe-contracts/blob/102e632d051650b7c4b0a822123f449beaf95aed/contracts/GnosisSafe.sol
        bytes32 operationHash = keccak256(
            abi.encodePacked(
            EIP191_PREFIX,
            EIP191_VERSION_DATA,
            this,
            hash));

        bytes32[2] memory r;
        bytes32[2] memory s;
        uint8[2] memory v;
        address signer;
        address cosigner;

        // extract 1 or 2 signatures depending on length
        if (_signature.length == 65) {
            (r[0], s[0], v[0]) = _signature.extractSignature(0);
            signer = ecrecover(operationHash, v[0], r[0], s[0]);
            cosigner = signer;
        } else if (_signature.length == 130) {
            (r[0], s[0], v[0]) = _signature.extractSignature(0);
            (r[1], s[1], v[1]) = _signature.extractSignature(65);
            signer = ecrecover(operationHash, v[0], r[0], s[0]);
            cosigner = ecrecover(operationHash, v[1], r[1], s[1]);
        } else {
            return 0;
        }
            
        // check for valid signature
        if (signer == address(0)) {
            return 0;
        }

        // check for valid signature
        if (cosigner == address(0)) {
            return 0;
        }

        // check to see if this is an authorized key
        if (address(authorizations[authVersion + uint256(signer)]) != cosigner) {
            return 0;
        }

        return ERC1271_VALIDSIGNATURE;
    }

    /// @notice Query if this contract implements an interface. This function takes into account
    ///  interfaces we implement dynamically through delegates. For interfaces that are just a
    ///  single method, using `setDelegate` will result in that method's ID returning true from 
    ///  `supportsInterface`. For composite interfaces that are composed of multiple functions, it is
    ///  necessary to add the interface ID manually with `setDelegate(interfaceID,
    ///  COMPOSITE_PLACEHOLDER)`
    ///  IN ADDITION to adding each function of the interface as usual.
    /// @param interfaceID The interface identifier, as specified in ERC-165
    /// @dev Interface identification is specified in ERC-165. This function
    ///  uses less than 30,000 gas.
    /// @return `true` if the contract implements `interfaceID` and
    ///  `interfaceID` is not 0xffffffff, `false` otherwise
    function supportsInterface(bytes4 interfaceID) external view returns (bool) {
        // First check if the ID matches one of the interfaces we support statically.
        if (
            interfaceID == this.supportsInterface.selector || // ERC165
            interfaceID == ERC721_RECEIVED_FINAL || // ERC721 Final
            interfaceID == ERC721_RECEIVED_DRAFT || // ERC721 Draft
            interfaceID == ERC223_ID || // ERC223
            interfaceID == ERC1271_VALIDSIGNATURE // ERC1271
        ) {
            return true;
        }
        // If we don't support the interface statically, check whether we have added
        // dynamic support for it.
        return uint256(delegates[interfaceID]) > 0;
    }

    /// @notice A version of `invoke()` that has no explicit signatures, and uses msg.sender
    ///  as both the signer and cosigner. Will only succeed if `msg.sender` is an authorized
    ///  signer for this wallet, with no cosigner, saving transaction size and gas in that case.
    /// @param data The data containing the transactions to be invoked; see internalInvoke for details.
    function invoke0(bytes calldata data) external {
        // The nonce doesn't need to be incremented for transactions that don't include explicit signatures;
        // the built-in nonce of the native ethereum transaction will protect against replay attacks, and we
        // can save the gas that would be spent updating the nonce variable

        // The operation should be approved if the signer address has no cosigner (i.e. signer == cosigner)
        require(address(authorizations[authVersion + uint256(msg.sender)]) == msg.sender, "Invalid authorization.");

        internalInvoke(0, data);
    }

    /// @notice A version of `invoke()` that has one explicit signature which is used to derive the authorized
    ///  address. Uses `msg.sender` as the cosigner.
    /// @param v the v value for the signature; see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-155.md
    /// @param r the r value for the signature
    /// @param s the s value for the signature
    /// @param nonce the nonce value for the signature
    /// @param authorizedAddress the address of the authorization key; this is used here so that cosigner signatures are interchangeable
    ///  between this function and `invoke2()`
    /// @param data The data containing the transactions to be invoked; see internalInvoke for details.
    function invoke1CosignerSends(uint8 v, bytes32 r, bytes32 s, uint256 nonce, address authorizedAddress, bytes calldata data) external {
        // check signature version
        require(v == 27 || v == 28, "Invalid signature version.");

        // calculate hash
        bytes32 operationHash = keccak256(
            abi.encodePacked(
            EIP191_PREFIX,
            EIP191_VERSION_DATA,
            this,
            nonce,
            authorizedAddress,
            data));
 
        // recover signer
        address signer = ecrecover(operationHash, v, r, s);

        // check for valid signature
        require(signer != address(0), "Invalid signature.");

        // check nonce
        require(nonce == nonces[signer], "must use correct nonce");

        // check signer
        require(signer == authorizedAddress, "authorized addresses must be equal");

        // Get cosigner
        address requiredCosigner = address(authorizations[authVersion + uint256(signer)]);
        
        // The operation should be approved if the signer address has no cosigner (i.e. signer == cosigner) or
        // if the actual cosigner matches the required cosigner.
        require(requiredCosigner == signer || requiredCosigner == msg.sender, "Invalid authorization.");

        // increment nonce to prevent replay attacks
        nonces[signer] = nonce + 1;

        // call internal function
        internalInvoke(operationHash, data);
    }

    /// @notice A version of `invoke()` that has one explicit signature which is used to derive the cosigning
    ///  address. Uses `msg.sender` as the authorized address.
    /// @param v the v value for the signature; see https://github.com/ethereum/EIPs/blob/master/EIPS/eip-155.md
    /// @param r the r value for the signature
    /// @param s the s value for the signature
    /// @param data The data containing the transactions to be invoked; see internalInvoke for details.
    function invoke1SignerSends(uint8 v, bytes32 r, bytes32 s, bytes calldata data) external {
        // check signature version
        // `ecrecover` will in fact return 0 if given invalid
        // so perhaps this check is redundant
        require(v == 27 || v == 28, "Invalid signature version.");
        
        uint256 nonce = nonces[msg.sender];

        // calculate hash
        bytes32 operationHash = keccak256(
            abi.encodePacked(
            EIP191_PREFIX,
            EIP191_VERSION_DATA,
            this,
            nonce,
            msg.sender,
            data));
 
        // recover cosigner
        address cosigner = ecrecover(operationHash, v, r, s);
        
        // check for valid signature
        require(cosigner != address(0), "Invalid signature.");

        // Get required cosigner
        address requiredCosigner = address(authorizations[authVersion + uint256(msg.sender)]);
        
        // The operation should be approved if the signer address has no cosigner (i.e. signer == cosigner) or
        // if the actual cosigner matches the required cosigner.
        require(requiredCosigner == cosigner || requiredCosigner == msg.sender, "Invalid authorization.");

        // increment nonce to prevent replay attacks
        nonces[msg.sender] = nonce + 1;
 
        internalInvoke(operationHash, data);
    }

    /// @notice A version of `invoke()` that has two explicit signatures, the first is used to derive the authorized
    ///  address, the second to derive the cosigner. The value of `msg.sender` is ignored.
    /// @param v the v values for the signatures
    /// @param r the r values for the signatures
    /// @param s the s values for the signatures
    /// @param nonce the nonce value for the signature
    /// @param authorizedAddress the address of the signer; forces the signature to be unique and tied to the signers nonce 
    /// @param data The data containing the transactions to be invoked; see internalInvoke for details.
    function invoke2(uint8[2] calldata v, bytes32[2] calldata r, bytes32[2] calldata s, uint256 nonce, address authorizedAddress, bytes calldata data) external {
        // check signature versions
        // `ecrecover` will infact return 0 if given invalid
        // so perhaps these checks are redundant
        require(v[0] == 27 || v[0] == 28, "invalid signature version v[0]");
        require(v[1] == 27 || v[1] == 28, "invalid signature version v[1]");
 
        bytes32 operationHash = keccak256(
            abi.encodePacked(
            EIP191_PREFIX,
            EIP191_VERSION_DATA,
            this,
            nonce,
            authorizedAddress,
            data));
 
        // recover signer and cosigner
        address signer = ecrecover(operationHash, v[0], r[0], s[0]);
        address cosigner = ecrecover(operationHash, v[1], r[1], s[1]);

        // check for valid signatures
        require(signer != address(0), "Invalid signature for signer.");
        require(cosigner != address(0), "Invalid signature for cosigner.");

        // check signer address
        require(signer == authorizedAddress, "authorized addresses must be equal");

        // check nonces
        require(nonce == nonces[signer], "must use correct nonce for signer");

        // Get Mapping
        address requiredCosigner = address(authorizations[authVersion + uint256(signer)]);
        
        // The operation should be approved if the signer address has no cosigner (i.e. signer == cosigner) or
        // if the actual cosigner matches the required cosigner.
        require(requiredCosigner == signer || requiredCosigner == cosigner, "Invalid authorization.");

        // increment nonce to prevent replay attacks
        nonces[signer]++;

        internalInvoke(operationHash, data);
    }

    /// @dev Internal invoke call, 
    /// @param operationHash The hash of the operation
    /// @param data The data to send to the `call()` operation
    ///  The data is prefixed with a global 1 byte revert flag
    ///  If revert is 1, then any revert from a `call()` operation is rethrown.
    ///  Otherwise, the error is recorded in the `result` field of the `InvocationSuccess` event.
    ///  Immediately following the revert byte (no padding), the data format is then is a series
    ///  of 1 or more tightly packed tuples:
    ///  `<target(20),amount(32),datalength(32),data>`
    ///  If `datalength == 0`, the data field must be omitted
    function internalInvoke(bytes32 operationHash, bytes memory data) internal {
        // keep track of the number of operations processed
        uint256 numOps;
        // keep track of the result of each operation as a bit
        uint256 result;

        // We need to store a reference to this string as a variable so we can use it as an argument to
        // the revert call from assembly.
        string memory invalidLengthMessage = "Data field too short";
        string memory callFailed = "Call failed";

        // At an absolute minimum, the data field must be at least 85 bytes
        // <revert(1), to_address(20), value(32), data_length(32)>
        require(data.length >= 85, invalidLengthMessage);

        // Forward the call onto its actual target. Note that the target address can be `self` here, which is
        // actually the required flow for modifying the configuration of the authorized keys and recovery address.
        //
        // The assembly code below loads data directly from memory, so the enclosing function must be marked `internal`
        assembly {
            // A cursor pointing to the revert flag, starts after the length field of the data object
            let memPtr := add(data, 32)

            // The revert flag is the leftmost byte from memPtr
            let revertFlag := byte(0, mload(memPtr))

            // A pointer to the end of the data object
            let endPtr := add(memPtr, mload(data))

            // Now, memPtr is a cursor pointing to the beginning of the current sub-operation
            memPtr := add(memPtr, 1)

            // Loop through data, parsing out the various sub-operations
            for { } lt(memPtr, endPtr) { } {
                // Load the length of the call data of the current operation
                // 52 = to(20) + value(32)
                let len := mload(add(memPtr, 52))
                
                // Compute a pointer to the end of the current operation
                // 84 = to(20) + value(32) + size(32)
                let opEnd := add(len, add(memPtr, 84))

                // Bail if the current operation's data overruns the end of the enclosing data buffer
                // NOTE: Comment out this bit of code and uncomment the next section if you want
                // the solidity-coverage tool to work.
                // See https://github.com/sc-forks/solidity-coverage/issues/287
                if gt(opEnd, endPtr) {
                    // The computed end of this operation goes past the end of the data buffer. Not good!
                    revert(add(invalidLengthMessage, 32), mload(invalidLengthMessage))
                }
                // NOTE: Code that is compatible with solidity-coverage
                // switch gt(opEnd, endPtr)
                // case 1 {
                //     revert(add(invalidLengthMessage, 32), mload(invalidLengthMessage))
                // }

                // This line of code packs in a lot of functionality!
                //  - load the target address from memPtr, the address is only 20-bytes but mload always grabs 32-bytes,
                //    so we have to shr by 12 bytes.
                //  - load the value field, stored at memPtr+20
                //  - pass a pointer to the call data, stored at memPtr+84
                //  - use the previously loaded len field as the size of the call data
                //  - make the call (passing all remaining gas to the child call)
                //  - check the result (0 == reverted)
                if eq(0, call(gas, shr(96, mload(memPtr)), mload(add(memPtr, 20)), add(memPtr, 84), len, 0, 0)) {
                    switch revertFlag
                    case 1 {
                        revert(add(callFailed, 32), mload(callFailed))
                    }
                    default {
                        // mark this operation as failed
                        // create the appropriate bit, 'or' with previous
                        result := or(result, exp(2, numOps))
                    }
                }

                // increment our counter
                numOps := add(numOps, 1)
             
                // Update mem pointer to point to the next sub-operation
                memPtr := opEnd
            }
        }

        // emit single event upon success
        emit InvocationSuccess(operationHash, result, numOps);
    }
}

// File: contracts/Wallet/CloneableWallet.sol

pragma solidity ^0.5.10;



/// @title Cloneable Wallet
/// @notice This contract represents a complete but non working wallet.  
///  It is meant to be deployed and serve as the contract that you clone
///  in an EIP 1167 clone setup.
/// @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1167.md
/// @dev Currently, we are seeing approximatley 933 gas overhead for using
///  the clone wallet; use `FullWallet` if you think users will overtake
///  the transaction threshold over the lifetime of the wallet.
contract CloneableWallet is CoreWallet {

    /// @dev An empty constructor that deploys a NON-FUNCTIONAL version
    ///  of `CoreWallet`
    constructor () public {
        initialized = true;
    }
}

// File: contracts/Ownership/Ownable.sol

pragma solidity ^0.5.10;


/// @title Ownable is for contracts that can be owned.
/// @dev The Ownable contract keeps track of an owner address,
///  and provides basic authorization functions.
contract Ownable {

    /// @dev the owner of the contract
    address public owner;

    /// @dev Fired when the owner to renounce ownership, leaving no one
    ///  as the owner.
    /// @param previousOwner The previous `owner` of this contract
    event OwnershipRenounced(address indexed previousOwner);
    
    /// @dev Fired when the owner to changes ownership
    /// @param previousOwner The previous `owner`
    /// @param newOwner The new `owner`
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /// @dev sets the `owner` to `msg.sender`
    constructor() public {
        owner = msg.sender;
    }

    /// @dev Throws if the `msg.sender` is not the current `owner`
    modifier onlyOwner() {
        require(msg.sender == owner, "must be owner");
        _;
    }

    /// @dev Allows the current `owner` to renounce ownership
    function renounceOwnership() external onlyOwner {
        emit OwnershipRenounced(owner);
        owner = address(0);
    }

    /// @dev Allows the current `owner` to transfer ownership
    /// @param _newOwner The new `owner`
    function transferOwnership(address _newOwner) external onlyOwner {
        _transferOwnership(_newOwner);
    }

    /// @dev Internal version of `transferOwnership`
    /// @param _newOwner The new `owner`
    function _transferOwnership(address _newOwner) internal {
        require(_newOwner != address(0), "cannot renounce ownership");
        emit OwnershipTransferred(owner, _newOwner);
        owner = _newOwner;
    }
}

// File: contracts/Ownership/HasNoEther.sol

pragma solidity ^0.5.10;



/// @title HasNoEther is for contracts that should not own Ether
contract HasNoEther is Ownable {

    /// @dev This contructor rejects incoming Ether
    constructor() public payable {
        require(msg.value == 0, "must not send Ether");
    }

    /// @dev Disallows direct send by default function not being `payable`
    function() external {}

    /// @dev Transfers all Ether held by this contract to the owner.
    function reclaimEther() external onlyOwner {
        msg.sender.transfer(address(this).balance); 
    }
}

// File: contracts/WalletFactory/CloneFactory.sol

pragma solidity ^0.5.10;


/// @title CloneFactory - a contract that creates clones
/// @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1167.md
/// @dev See https://github.com/optionality/clone-factory/blob/master/contracts/CloneFactory.sol
contract CloneFactory {
    event CloneCreated(address indexed target, address clone);

    function createClone(address target) internal returns (address payable result) {
        bytes20 targetBytes = bytes20(target);
        assembly {
            let clone := mload(0x40)
            mstore(clone, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(clone, 0x14), targetBytes)
            mstore(add(clone, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            result := create(0, clone, 0x37)
        }
    }

    function createClone2(address target, bytes32 salt) internal returns (address payable result) {
        bytes20 targetBytes = bytes20(target);
        assembly {
            let clone := mload(0x40)
            mstore(clone, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(clone, 0x14), targetBytes)
            mstore(add(clone, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            result := create2(0, clone, 0x37, salt)
        }
    }
}

// File: contracts/WalletFactory/FullWalletByteCode.sol

pragma solidity ^0.5.10;

/// @title FullWalletByteCode
/// @dev A contract containing the FullWallet bytecode, for use in deployment.
contract FullWalletByteCode {
    /// @notice This is the raw bytecode of the full wallet. It is encoded here as a raw byte
    ///  array to support deployment with CREATE2, as Solidity's 'new' constructor system does
    ///  not support CREATE2 yet.
    ///
    ///  NOTE: Be sure to update this whenever the wallet bytecode changes!
    ///  Simply run `npm run build` and then copy the `"bytecode"`
    ///  portion from the `build/contracts/FullWallet.json` file to here,
    ///  then append 64x3 0's.
    bytes constant fullWalletBytecode = hex'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';
}

// File: contracts/WalletFactory/WalletFactory.sol

pragma solidity ^0.5.10;






/// @title WalletFactory
/// @dev A contract for creating wallets. 
contract WalletFactory is FullWalletByteCode, HasNoEther, CloneFactory {

    /// @dev Pointer to a pre-deployed instance of the Wallet contract. This
    ///  deployment contains all the Wallet code.
    address public cloneWalletAddress;

    /// @notice Emitted whenever a wallet is created
    /// @param wallet The address of the wallet created
    /// @param authorizedAddress The initial authorized address of the wallet
    /// @param full `true` if the deployed wallet was a full, self
    ///  contained wallet; `false` if the wallet is a clone wallet
    event WalletCreated(address wallet, address authorizedAddress, bool full);

    constructor(address _cloneWalletAddress) public {
        cloneWalletAddress = _cloneWalletAddress;
    }

    /// @notice Used to deploy a wallet clone
    /// @dev Reasonably cheap to run (~100K gas)
    /// @param _recoveryAddress the initial recovery address for the wallet
    /// @param _authorizedAddress an initial authorized address for the wallet
    /// @param _cosigner the cosigning address for the initial `_authorizedAddress`
    function deployCloneWallet(
        address _recoveryAddress,
        address _authorizedAddress,
        uint256 _cosigner
    )
        public 
    {
        // create the clone
        address payable clone = createClone(cloneWalletAddress);
        // init the clone
        CloneableWallet(clone).init(_authorizedAddress, _cosigner, _recoveryAddress);
        // emit event
        emit WalletCreated(clone, _authorizedAddress, false);
    }

    /// @notice Used to deploy a wallet clone
    /// @dev Reasonably cheap to run (~100K gas)
    /// @dev The clone does not require `onlyOwner` as we avoid front-running
    ///  attacks by hashing the salt combined with the call arguments and using
    ///  that as the salt we provide to `create2`. Given this constraint, a 
    ///  front-runner would need to use the same `_recoveryAddress`, `_authorizedAddress`,
    ///  and `_cosigner` parameters as the original deployer, so the original deployer
    ///  would have control of the wallet even if the transaction was front-run.
    /// @param _recoveryAddress the initial recovery address for the wallet
    /// @param _authorizedAddress an initial authorized address for the wallet
    /// @param _cosigner the cosigning address for the initial `_authorizedAddress`
    /// @param _salt the salt for the `create2` instruction
    function deployCloneWallet2(
        address _recoveryAddress,
        address _authorizedAddress,
        uint256 _cosigner,
        bytes32 _salt
    )
        public
    {
        // calculate our own salt based off of args
        bytes32 salt = keccak256(abi.encodePacked(_salt, _authorizedAddress, _cosigner, _recoveryAddress));
        // create the clone counterfactually
        address payable clone = createClone2(cloneWalletAddress, salt);
        // ensure we get an address
        require(clone != address(0), "wallet must have address");

        // check size
        uint256 size;
        // note this takes an additional 700 gas
        assembly {
            size := extcodesize(clone)
        }

        require(size > 0, "wallet must have code");

        // init the clone
        CloneableWallet(clone).init(_authorizedAddress, _cosigner, _recoveryAddress);
        // emit event
        emit WalletCreated(clone, _authorizedAddress, false);   
    }

    /// @notice Used to deploy a full wallet
    /// @dev This is potentially very gas intensive!
    /// @param _recoveryAddress The initial recovery address for the wallet
    /// @param _authorizedAddress An initial authorized address for the wallet
    /// @param _cosigner The cosigning address for the initial `_authorizedAddress`
    function deployFullWallet(
        address _recoveryAddress,
        address _authorizedAddress,
        uint256 _cosigner
    )
        public 
    {
        // Copy the bytecode of the full wallet to memory.
        bytes memory fullWallet = fullWalletBytecode;

        address full;
        assembly {
            // get start of wallet buffer
            let startPtr := add(fullWallet, 0x20)
            // get start of arguments
            let endPtr := sub(add(startPtr, mload(fullWallet)), 0x60)
            // copy constructor parameters to memory
            mstore(endPtr, _authorizedAddress)
            mstore(add(endPtr, 0x20), _cosigner)
            mstore(add(endPtr, 0x40), _recoveryAddress)
            // create the contract
            full := create(0, startPtr, mload(fullWallet))
        }
        
        // check address
        require(full != address(0), "wallet must have address");

        // check size
        uint256 size;
        // note this takes an additional 700 gas, 
        // which is a relatively small amount in this case
        assembly {
            size := extcodesize(full)
        }

        require(size > 0, "wallet must have code");

        emit WalletCreated(full, _authorizedAddress, true);
    }

    /// @notice Used to deploy a full wallet counterfactually
    /// @dev This is potentially very gas intensive!
    /// @dev As the arguments are appended to the end of the bytecode and
    ///  then included in the `create2` call, we are safe from front running
    ///  attacks and do not need to restrict the caller of this function.
    /// @param _recoveryAddress The initial recovery address for the wallet
    /// @param _authorizedAddress An initial authorized address for the wallet
    /// @param _cosigner The cosigning address for the initial `_authorizedAddress`
    /// @param _salt The salt for the `create2` instruction
    function deployFullWallet2(
        address _recoveryAddress,
        address _authorizedAddress,
        uint256 _cosigner,
        bytes32 _salt
    )
        public
    {
        // Note: Be sure to update this whenever the wallet bytecode changes!
        // Simply run `yarn run build` and then copy the `"bytecode"`
        // portion from the `build/contracts/FullWallet.json` file to here,
        // then append 64x3 0's.
        //
        // Note: By not passing in the code as an argument, we save 600,000 gas.
        // An alternative would be to use `extcodecopy`, but again we save
        // gas by not having to call `extcodecopy`.
        bytes memory fullWallet = fullWalletBytecode;

        address full;
        assembly {
            // get start of wallet buffer
            let startPtr := add(fullWallet, 0x20)
            // get start of arguments
            let endPtr := sub(add(startPtr, mload(fullWallet)), 0x60)
            // copy constructor parameters to memory
            mstore(endPtr, _authorizedAddress)
            mstore(add(endPtr, 0x20), _cosigner)
            mstore(add(endPtr, 0x40), _recoveryAddress)
            // create the contract using create2
            full := create2(0, startPtr, mload(fullWallet), _salt)
        }
        
        // check address
        require(full != address(0), "wallet must have address");

        // check size
        uint256 size;
        // note this takes an additional 700 gas, 
        // which is a relatively small amount in this case
        assembly {
            size := extcodesize(full)
        }

        require(size > 0, "wallet must have code");

        emit WalletCreated(full, _authorizedAddress, true);
    }
}

{
  "compilationTarget": {
    "WalletFactory.sol": "WalletFactory"
  },
  "evmVersion": "constantinople",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}