/**
    Website:    https://crowescrow.io
    X:          https://x.com/crowescrow
    Telegram:   https://t.me/crowescrow
*/

// SPDX-License-Identifier: MIT

pragma solidity 0.8.25;

// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    ) external returns (bool);
}

// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// OpenZeppelin Contracts (last updated v5.0.0) (utils/Context.sol)

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(
        address sender,
        uint256 balance,
        uint256 needed
    );

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(
        address spender,
        uint256 allowance,
        uint256 needed
    );

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(
        address sender,
        uint256 balance,
        uint256 needed,
        uint256 tokenId
    );

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender)
        public
        view
        virtual
        returns (uint256)
    {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value)
        public
        virtual
        returns (bool)
    {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    ) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(
        address from,
        address to,
        uint256 value
    ) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value,
        bool emitEvent
    ) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 value
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(
                    spender,
                    currentAllowance,
                    value
                );
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

interface IUniswapV2Factory {
    function createPair(address tokenA, address tokenB)
        external
        returns (address pair);
}

interface IUniswapV2Router {
    function factory() external pure returns (address);

    function WETH() external pure returns (address);

    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    )
        external
        payable
        returns (
            uint256 amountToken,
            uint256 amountETH,
            uint256 liquidity
        );

    function swapExactTokensForETH(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
}

contract CROW is Ownable, ERC20 {
    uint256 public constant MAX_FEE = 25;

    IUniswapV2Router public immutable uniswapV2Router;
    address public immutable uniswapV2Pair;
    address public marketingWallet;

    bool public isLimitsEnabled;
    bool public isCooldownEnabled;
    bool public isTaxEnabled;
    bool private isSwapBack;

    uint256 public maxBuy;
    uint256 public maxSell;
    uint256 public maxWallet;

    uint256 public swapTokensAtAmount;
    uint256 public buyFee;
    uint256 public sellFee;

    mapping(address => bool) public isExcludedFromFees;
    mapping(address => bool) public isExcludedFromLimits;
    mapping(address => bool) public automatedMarketMakerPairs;
    mapping(address => uint256) private _holderLastTransferTimestamp;

    event SetMarketingWallet(
        address indexed newWallet,
        address indexed oldWallet
    );
    event SetMaxBuy(uint256 amount);
    event SetMaxSell(uint256 amount);
    event SetMaxWallet(uint256 amount);
    event ExcludeFromFees(address account, bool isExcluded);
    event ExcludeFromLimits(address account, bool isExcluded);
    event SetAutomatedMarketMakerPair(address pair, bool value);

    constructor() Ownable(msg.sender) ERC20("Crow", "CROW") {
        address sender = msg.sender;
        _mint(sender, 1_000_000_000 ether);
        uint256 totalSupply = totalSupply();

        marketingWallet = 0x6027812098E0Bf4D82c61Ce31B127dD6AD16a40f;

        maxBuy = (totalSupply * 1) / 100;
        maxSell = (totalSupply * 1) / 100;
        maxWallet = (totalSupply * 1) / 100;
        swapTokensAtAmount = (totalSupply * 5) / 10000;

        isLimitsEnabled = true;
        isCooldownEnabled = true;
        isTaxEnabled = true;

        buyFee = 10;
        sellFee = 25;

        uniswapV2Router = IUniswapV2Router(
            0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
        );

        uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(
            address(this),
            uniswapV2Router.WETH()
        );

        _setAMMPair(uniswapV2Pair, true);
        _approve(address(this), address(uniswapV2Router), type(uint256).max);
        _excludeFromFees(address(this), true);
        _excludeFromFees(address(0xdead), true);
        _excludeFromFees(sender, true);
        _excludeFromFees(marketingWallet, true);
        _excludeFromLimits(address(this), true);
        _excludeFromLimits(address(0xdead), true);
        _excludeFromLimits(sender, true);
        _excludeFromLimits(marketingWallet, true);
    }

    function _transferOwnership(address newOwner) internal override {
        address oldOwner = owner();
        if (oldOwner != address(0)) {
            _excludeFromFees(oldOwner, false);
            _excludeFromLimits(oldOwner, false);
        }
        _excludeFromFees(newOwner, true);
        _excludeFromLimits(newOwner, true);
        super._transferOwnership(newOwner);
    }

    function setMarketingWallet(address _marketingWallet) public onlyOwner {
        require(_marketingWallet != address(0), "CROW: Address 0");
        address oldWallet = marketingWallet;
        marketingWallet = _marketingWallet;
        emit SetMarketingWallet(marketingWallet, oldWallet);
    }

    function setLimitsEnabled(bool value) external onlyOwner {
        isLimitsEnabled = value;
    }

    function setCooldownEnabled(bool value) external onlyOwner {
        isCooldownEnabled = value;
    }

    function setTaxEnabled(bool value) external onlyOwner {
        isTaxEnabled = value;
    }

    function setMaxBuy(uint256 amount) external onlyOwner {
        require(
            amount >= ((totalSupply() * 2) / 1000),
            "CROW: Cannot set max buy amount lower than 0.2%"
        );
        maxBuy = amount;
        emit SetMaxBuy(maxBuy);
    }

    function setMaxSell(uint256 amount) external onlyOwner {
        require(
            amount >= ((totalSupply() * 2) / 1000),
            "CROW: Cannot set max sell amount lower than 0.2%"
        );
        maxSell = amount;
        emit SetMaxSell(maxSell);
    }

    function setMaxWallet(uint256 amount) external onlyOwner {
        require(
            amount >= ((totalSupply() * 3) / 1000),
            "CROW: Cannot set max wallet amount lower than 0.3%"
        );
        maxWallet = amount;
        emit SetMaxWallet(maxWallet);
    }

    function setSwapTokensAtAmount(uint256 amount) external onlyOwner {
        uint256 _totalSupply = totalSupply();
        require(
            amount >= (_totalSupply * 1) / 1000000,
            "CROW: Swap amount cannot be lower than 0.0001% total supply."
        );
        require(
            amount <= (_totalSupply * 5) / 1000,
            "CROW: Swap amount cannot be higher than 0.5% total supply."
        );
        swapTokensAtAmount = amount;
    }

    function setBuyFees(uint256 _buyFee) external onlyOwner {
        require(
            _buyFee <= MAX_FEE,
            "CROW: Must keep fees below or equal max fee"
        );
        buyFee = _buyFee;
    }

    function setSellFees(uint256 _sellFee) external onlyOwner {
        require(
            _sellFee <= MAX_FEE,
            "CROW: Must keep fees below or equal max fee"
        );
        sellFee = _sellFee;
    }

    function _excludeFromFees(address account, bool value) internal {
        isExcludedFromFees[account] = value;
        emit ExcludeFromFees(account, value);
    }

    function excludeFromFees(address account, bool value) external onlyOwner {
        _excludeFromFees(account, value);
    }

    function bulkExcludeFromFees(address[] calldata accounts, bool value)
        external
        onlyOwner
    {
        for (uint256 i = 0; i < accounts.length; i++) {
            _excludeFromFees(accounts[i], value);
        }
    }

    function _excludeFromLimits(address account, bool value) internal {
        isExcludedFromLimits[account] = value;
        emit ExcludeFromLimits(account, value);
    }

    function excludeFromLimits(address account, bool value) external onlyOwner {
        _excludeFromLimits(account, value);
    }

    function bulkExcludeFromLimits(address[] calldata accounts, bool value)
        external
        onlyOwner
    {
        for (uint256 i = 0; i < accounts.length; i++) {
            _excludeFromLimits(accounts[i], value);
        }
    }

    function _setAMMPair(address pair, bool value) internal {
        automatedMarketMakerPairs[pair] = value;
        emit SetAutomatedMarketMakerPair(pair, value);
    }

    function setAMMPair(address pair, bool value) external onlyOwner {
        _setAMMPair(pair, value);
    }

    function _update(
        address from,
        address to,
        uint256 amount
    ) internal override {
        bool limits = isLimitsEnabled &&
            !isSwapBack &&
            !(isExcludedFromLimits[from] || isExcludedFromLimits[to]);
        if (limits) {
            if (
                from != owner() &&
                to != owner() &&
                to != address(0) &&
                to != address(0xdead)
            ) {
                if (isCooldownEnabled) {
                    if (to != address(uniswapV2Router) && to != uniswapV2Pair) {
                        require(
                            _holderLastTransferTimestamp[tx.origin] <
                                block.number - 3 &&
                                _holderLastTransferTimestamp[to] <
                                block.number - 3,
                            "CROW: Transfer delay enabled. Try again later."
                        );
                        _holderLastTransferTimestamp[tx.origin] = block.number;
                        _holderLastTransferTimestamp[to] = block.number;
                    }
                }

                if (
                    automatedMarketMakerPairs[from] && !isExcludedFromLimits[to]
                ) {
                    require(
                        amount <= maxBuy,
                        "CROW: Buy transfer amount exceeds the max buy."
                    );
                    require(
                        amount + balanceOf(to) <= maxWallet,
                        "CROW: Cannot Exceed max wallet"
                    );
                } else if (
                    automatedMarketMakerPairs[to] && !isExcludedFromLimits[from]
                ) {
                    require(
                        amount <= maxSell,
                        "CROW: Sell transfer amount exceeds the max sell."
                    );
                } else if (!isExcludedFromLimits[to]) {
                    require(
                        amount + balanceOf(to) <= maxWallet,
                        "CROW: Cannot Exceed max wallet"
                    );
                }
            }
        }

        bool takeFee = isTaxEnabled &&
            !isSwapBack &&
            !(isExcludedFromFees[from] || isExcludedFromFees[to]);

        if (takeFee) {
            uint256 fees = 0;
            // on sell
            if (automatedMarketMakerPairs[to]) {
                fees = (amount * sellFee) / 100;
            }
            // on buy
            else if (automatedMarketMakerPairs[from]) {
                fees = (amount * buyFee) / 100;
            }

            if (fees > 0) {
                amount -= fees;
                super._update(from, address(this), fees);
            }
        }

        if (
            takeFee &&
            !automatedMarketMakerPairs[from] &&
            balanceOf(address(this)) >= swapTokensAtAmount
        ) {
            isSwapBack = true;
            _swapBack();
            isSwapBack = false;
        }

        super._update(from, to, amount);
    }

    function _swapBack() internal {
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapV2Router.WETH();

        uint256 maxSwapAmount = swapTokensAtAmount * 20;
        uint256 swapAmount = balanceOf(address(this));

        if (swapAmount > maxSwapAmount) {
            swapAmount = maxSwapAmount;
        }

        uniswapV2Router.swapExactTokensForETH(
            swapAmount,
            0,
            path,
            marketingWallet,
            block.timestamp
        );
    }

    function withdrawStuckTokens(address tkn) external onlyOwner {
        address sender = msg.sender;
        uint256 amount;
        if (tkn == address(0)) {
            bool success;
            amount = address(this).balance;
            require(amount > 0, "CROW: No native tokens");
            (success, ) = address(sender).call{value: amount}("");
            require(success, "CROW: Failed to withdraw native tokens");
        } else {
            amount = IERC20(tkn).balanceOf(address(this));
            require(amount > 0, "CROW: No tokens");
            IERC20(tkn).transfer(msg.sender, amount);
        }
    }
}

{
  "compilationTarget": {
    "contracts/CROW/CROW.sol": "CROW"
  },
  "evmVersion": "cancun",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}