// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Base64.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides a set of functions to operate with Base64 strings.
 *
 * _Available since v4.5._
 */
library Base64 {
    /**
     * @dev Base64 Encoding/Decoding Table
     */
    string internal constant _TABLE = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";

    /**
     * @dev Converts a `bytes` to its Bytes64 `string` representation.
     */
    function encode(bytes memory data) internal pure returns (string memory) {
        /**
         * Inspired by Brecht Devos (Brechtpd) implementation - MIT licence
         * https://github.com/Brechtpd/base64/blob/e78d9fd951e7b0977ddca77d92dc85183770daf4/base64.sol
         */
        if (data.length == 0) return "";

        // Loads the table into memory
        string memory table = _TABLE;

        // Encoding takes 3 bytes chunks of binary data from `bytes` data parameter
        // and split into 4 numbers of 6 bits.
        // The final Base64 length should be `bytes` data length multiplied by 4/3 rounded up
        // - `data.length + 2`  -> Round up
        // - `/ 3`              -> Number of 3-bytes chunks
        // - `4 *`              -> 4 characters for each chunk
        string memory result = new string(4 * ((data.length + 2) / 3));

        /// @solidity memory-safe-assembly
        assembly {
            // Prepare the lookup table (skip the first "length" byte)
            let tablePtr := add(table, 1)

            // Prepare result pointer, jump over length
            let resultPtr := add(result, 32)

            // Run over the input, 3 bytes at a time
            for {
                let dataPtr := data
                let endPtr := add(data, mload(data))
            } lt(dataPtr, endPtr) {

            } {
                // Advance 3 bytes
                dataPtr := add(dataPtr, 3)
                let input := mload(dataPtr)

                // To write each character, shift the 3 bytes (18 bits) chunk
                // 4 times in blocks of 6 bits for each character (18, 12, 6, 0)
                // and apply logical AND with 0x3F which is the number of
                // the previous character in the ASCII table prior to the Base64 Table
                // The result is then added to the table to get the character to write,
                // and finally write it in the result pointer but with a left shift
                // of 256 (1 byte) - 8 (1 ASCII char) = 248 bits

                mstore8(resultPtr, mload(add(tablePtr, and(shr(18, input), 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance

                mstore8(resultPtr, mload(add(tablePtr, and(shr(12, input), 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance

                mstore8(resultPtr, mload(add(tablePtr, and(shr(6, input), 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance

                mstore8(resultPtr, mload(add(tablePtr, and(input, 0x3F))))
                resultPtr := add(resultPtr, 1) // Advance
            }

            // When data `bytes` is not exactly 3 bytes long
            // it is padded with `=` characters at the end
            switch mod(mload(data), 3)
            case 1 {
                mstore8(sub(resultPtr, 1), 0x3d)
                mstore8(sub(resultPtr, 2), 0x3d)
            }
            case 2 {
                mstore8(sub(resultPtr, 1), 0x3d)
            }
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: address zero is not a valid owner");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _ownerOf(tokenId);
        require(owner != address(0), "ERC721: invalid token ID");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        _requireMinted(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not token owner or approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        _requireMinted(tokenId);

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
        _safeTransfer(from, to, tokenId, data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _ownerOf(tokenId) != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId, 1);

        // Check that tokenId was not minted by `_beforeTokenTransfer` hook
        require(!_exists(tokenId), "ERC721: token already minted");

        unchecked {
            // Will not overflow unless all 2**256 token ids are minted to the same owner.
            // Given that tokens are minted one by one, it is impossible in practice that
            // this ever happens. Might change if we allow batch minting.
            // The ERC fails to describe this case.
            _balances[to] += 1;
        }

        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);

        _afterTokenTransfer(address(0), to, tokenId, 1);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId, 1);

        // Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
        owner = ERC721.ownerOf(tokenId);

        // Clear approvals
        delete _tokenApprovals[tokenId];

        unchecked {
            // Cannot overflow, as that would require more tokens to be burned/transferred
            // out than the owner initially received through minting and transferring in.
            _balances[owner] -= 1;
        }
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);

        _afterTokenTransfer(owner, address(0), tokenId, 1);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId, 1);

        // Check that tokenId was not transferred by `_beforeTokenTransfer` hook
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");

        // Clear approvals from the previous owner
        delete _tokenApprovals[tokenId];

        unchecked {
            // `_balances[from]` cannot overflow for the same reason as described in `_burn`:
            // `from`'s balance is the number of token held, which is at least one before the current
            // transfer.
            // `_balances[to]` could overflow in the conditions described in `_mint`. That would require
            // all 2**256 token ids to be minted, which in practice is impossible.
            _balances[from] -= 1;
            _balances[to] += 1;
        }
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        _afterTokenTransfer(from, to, tokenId, 1);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` has not been minted yet.
     */
    function _requireMinted(uint256 tokenId) internal view virtual {
        require(_exists(tokenId), "ERC721: invalid token ID");
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
     * - When `from` is zero, the tokens will be minted for `to`.
     * - When `to` is zero, ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256, /* firstTokenId */
        uint256 batchSize
    ) internal virtual {
        if (batchSize > 1) {
            if (from != address(0)) {
                _balances[from] -= batchSize;
            }
            if (to != address(0)) {
                _balances[to] += batchSize;
            }
        }
    }

    /**
     * @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
     * - When `from` is zero, the tokens were minted for `to`.
     * - When `to` is zero, ``from``'s tokens were burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 firstTokenId,
        uint256 batchSize
    ) internal virtual {}
}

// SPDX-License-Identifier: CC0-1.0
pragma solidity >=0.8.13;

/**
 * @title IDelegateRegistry
 * @custom:version 2.0
 * @custom:author foobar (0xfoobar)
 * @notice A standalone immutable registry storing delegated permissions from one address to another
 */
interface IDelegateRegistry {
    /// @notice Delegation type, NONE is used when a delegation does not exist or is revoked
    enum DelegationType {
        NONE,
        ALL,
        CONTRACT,
        ERC721,
        ERC20,
        ERC1155
    }

    /// @notice Struct for returning delegations
    struct Delegation {
        DelegationType type_;
        address to;
        address from;
        bytes32 rights;
        address contract_;
        uint256 tokenId;
        uint256 amount;
    }

    /// @notice Emitted when an address delegates or revokes rights for their entire wallet
    event DelegateAll(address indexed from, address indexed to, bytes32 rights, bool enable);

    /// @notice Emitted when an address delegates or revokes rights for a contract address
    event DelegateContract(address indexed from, address indexed to, address indexed contract_, bytes32 rights, bool enable);

    /// @notice Emitted when an address delegates or revokes rights for an ERC721 tokenId
    event DelegateERC721(address indexed from, address indexed to, address indexed contract_, uint256 tokenId, bytes32 rights, bool enable);

    /// @notice Emitted when an address delegates or revokes rights for an amount of ERC20 tokens
    event DelegateERC20(address indexed from, address indexed to, address indexed contract_, bytes32 rights, uint256 amount);

    /// @notice Emitted when an address delegates or revokes rights for an amount of an ERC1155 tokenId
    event DelegateERC1155(address indexed from, address indexed to, address indexed contract_, uint256 tokenId, bytes32 rights, uint256 amount);

    /// @notice Thrown if multicall calldata is malformed
    error MulticallFailed();

    /**
     * -----------  WRITE -----------
     */

    /**
     * @notice Call multiple functions in the current contract and return the data from all of them if they all succeed
     * @param data The encoded function data for each of the calls to make to this contract
     * @return results The results from each of the calls passed in via data
     */
    function multicall(bytes[] calldata data) external payable returns (bytes[] memory results);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for all contracts
     * @param to The address to act as delegate
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param enable Whether to enable or disable this delegation, true delegates and false revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateAll(address to, bytes32 rights, bool enable) external payable returns (bytes32 delegationHash);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for a specific contract
     * @param to The address to act as delegate
     * @param contract_ The contract whose rights are being delegated
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param enable Whether to enable or disable this delegation, true delegates and false revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateContract(address to, address contract_, bytes32 rights, bool enable) external payable returns (bytes32 delegationHash);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for a specific ERC721 token
     * @param to The address to act as delegate
     * @param contract_ The contract whose rights are being delegated
     * @param tokenId The token id to delegate
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param enable Whether to enable or disable this delegation, true delegates and false revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateERC721(address to, address contract_, uint256 tokenId, bytes32 rights, bool enable) external payable returns (bytes32 delegationHash);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for a specific amount of ERC20 tokens
     * @dev The actual amount is not encoded in the hash, just the existence of a amount (since it is an upper bound)
     * @param to The address to act as delegate
     * @param contract_ The address for the fungible token contract
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param amount The amount to delegate, > 0 delegates and 0 revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateERC20(address to, address contract_, bytes32 rights, uint256 amount) external payable returns (bytes32 delegationHash);

    /**
     * @notice Allow the delegate to act on behalf of `msg.sender` for a specific amount of ERC1155 tokens
     * @dev The actual amount is not encoded in the hash, just the existence of a amount (since it is an upper bound)
     * @param to The address to act as delegate
     * @param contract_ The address of the contract that holds the token
     * @param tokenId The token id to delegate
     * @param rights Specific subdelegation rights granted to the delegate, pass an empty bytestring to encompass all rights
     * @param amount The amount of that token id to delegate, > 0 delegates and 0 revokes
     * @return delegationHash The unique identifier of the delegation
     */
    function delegateERC1155(address to, address contract_, uint256 tokenId, bytes32 rights, uint256 amount) external payable returns (bytes32 delegationHash);

    /**
     * ----------- CHECKS -----------
     */

    /**
     * @notice Check if `to` is a delegate of `from` for the entire wallet
     * @param to The potential delegate address
     * @param from The potential address who delegated rights
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return valid Whether delegate is granted to act on the from's behalf
     */
    function checkDelegateForAll(address to, address from, bytes32 rights) external view returns (bool);

    /**
     * @notice Check if `to` is a delegate of `from` for the specified `contract_` or the entire wallet
     * @param to The delegated address to check
     * @param contract_ The specific contract address being checked
     * @param from The cold wallet who issued the delegation
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return valid Whether delegate is granted to act on from's behalf for entire wallet or that specific contract
     */
    function checkDelegateForContract(address to, address from, address contract_, bytes32 rights) external view returns (bool);

    /**
     * @notice Check if `to` is a delegate of `from` for the specific `contract` and `tokenId`, the entire `contract_`, or the entire wallet
     * @param to The delegated address to check
     * @param contract_ The specific contract address being checked
     * @param tokenId The token id for the token to delegating
     * @param from The wallet that issued the delegation
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return valid Whether delegate is granted to act on from's behalf for entire wallet, that contract, or that specific tokenId
     */
    function checkDelegateForERC721(address to, address from, address contract_, uint256 tokenId, bytes32 rights) external view returns (bool);

    /**
     * @notice Returns the amount of ERC20 tokens the delegate is granted rights to act on the behalf of
     * @param to The delegated address to check
     * @param contract_ The address of the token contract
     * @param from The cold wallet who issued the delegation
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return balance The delegated balance, which will be 0 if the delegation does not exist
     */
    function checkDelegateForERC20(address to, address from, address contract_, bytes32 rights) external view returns (uint256);

    /**
     * @notice Returns the amount of a ERC1155 tokens the delegate is granted rights to act on the behalf of
     * @param to The delegated address to check
     * @param contract_ The address of the token contract
     * @param tokenId The token id to check the delegated amount of
     * @param from The cold wallet who issued the delegation
     * @param rights Specific rights to check for, pass the zero value to ignore subdelegations and check full delegations only
     * @return balance The delegated balance, which will be 0 if the delegation does not exist
     */
    function checkDelegateForERC1155(address to, address from, address contract_, uint256 tokenId, bytes32 rights) external view returns (uint256);

    /**
     * ----------- ENUMERATIONS -----------
     */

    /**
     * @notice Returns all enabled delegations a given delegate has received
     * @param to The address to retrieve delegations for
     * @return delegations Array of Delegation structs
     */
    function getIncomingDelegations(address to) external view returns (Delegation[] memory delegations);

    /**
     * @notice Returns all enabled delegations an address has given out
     * @param from The address to retrieve delegations for
     * @return delegations Array of Delegation structs
     */
    function getOutgoingDelegations(address from) external view returns (Delegation[] memory delegations);

    /**
     * @notice Returns all hashes associated with enabled delegations an address has received
     * @param to The address to retrieve incoming delegation hashes for
     * @return delegationHashes Array of delegation hashes
     */
    function getIncomingDelegationHashes(address to) external view returns (bytes32[] memory delegationHashes);

    /**
     * @notice Returns all hashes associated with enabled delegations an address has given out
     * @param from The address to retrieve outgoing delegation hashes for
     * @return delegationHashes Array of delegation hashes
     */
    function getOutgoingDelegationHashes(address from) external view returns (bytes32[] memory delegationHashes);

    /**
     * @notice Returns the delegations for a given array of delegation hashes
     * @param delegationHashes is an array of hashes that correspond to delegations
     * @return delegations Array of Delegation structs, return empty structs for nonexistent or revoked delegations
     */
    function getDelegationsFromHashes(bytes32[] calldata delegationHashes) external view returns (Delegation[] memory delegations);

    /**
     * ----------- STORAGE ACCESS -----------
     */

    /**
     * @notice Allows external contracts to read arbitrary storage slots
     */
    function readSlot(bytes32 location) external view returns (bytes32);

    /**
     * @notice Allows external contracts to read an arbitrary array of storage slots
     */
    function readSlots(bytes32[] calldata locations) external view returns (bytes32[] memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC165.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Prohibition / VenturePunk,LLC
// Written By: Thomas Lipari (thom.eth)
pragma solidity ^0.8.23;

/**
 * @title The SantaProtocol contract
 * @author Thomas Lipari (thom.eth)
 * @notice A contract that lets people deposit an NFT into a pool and then later lets them randomly redeem another one using Chainlink VRF2
 */
interface ISantaProtocol {
    //=========//
    // Structs //
    //=========//

    // Struct to store gifts in the pool
    struct Gift {
        address gifter;
        address nft;
        uint256 tokenId;
    }

    //========//
    // Errors //
    //========//

    error RedemptionMustHappenAfterRegistration();
    error GiftMustSupportERC721Interface();
    error InvalidSenderMustNotBeContract();
    error RedemptionHasNotStarted();
    error PoolSizeExceedsAmount();
    error MustApproveContract();
    error HasNotBeenShuffled();
    error DoesNotOwnPresent();
    error RegistrationEnded();
    error CannotGiftPresent();
    error InvalidSignature();
    error MaxGiftsReached();
    error MustOwnTokenId();

    //========//
    // Events //
    //========//

    event ERC721Received(address operator, address from, uint256 tokenId, bytes data);
    event GiftAdded(address gifter, address nft, uint256 tokenId);
    event GiftChosen(address account, uint256 presentTokenId, address nft, uint256 tokenId);

    //=========================//
    // Gift Exchange Functions //
    //=========================//

    /**
     * @notice Function used to add an NFT to the pool.
     * @param nft - the address of the NFT being added
     * @param tokenId - the token id of the NFT being added
     * @param sig - a message signed by the signer address verifying the NFT is eligible
     */
    function addGift(address nft, uint256 tokenId, bytes calldata sig)
        external
        returns (address giftAddress, uint256 giftTokenId);

    /**
     * @notice Function used to burn a Present NFT and redeem the gift in the pool it's been tied to
     * @param tokenId - the token id of the Present NFT being burned
     */
    function openGift(uint256 tokenId) external returns (address chosenGiftAddress, uint256 chosenGiftTokenId);

    //================//
    // View Functions //
    //================//

    /**
     * @notice Get the number of NFTs in the gift pool
     */
    function getSigner() external view returns (address);

    /**
     * @notice Get the number of NFTs in the gift pool
     */
    function getRegistrationEnd() external view returns (uint256);

    /**
     * @notice Get the number of NFTs in the gift pool
     */
    function getRedemptionStart() external view returns (uint256);

    /**
     * @notice Get the number of NFTs in the gift pool
     */
    function getGiftPoolSize() external view returns (uint256);

    /**
     * @notice Get the whole gift pool
     * @dev intended for offchain use only
     */
    function getGiftPool() external view returns (Gift[] memory);

    /**
     * @notice Get the number of gifts that a user has randomly chosen
     * @param account - the wallet address of the user
     */
    function getNumberOfChosenGifts(address account) external view returns (uint256);

    /**
     * @notice Get the array of gifts that a user has randomly chosen
     * @param account - the wallet address of the user
     * @dev intended for offchain use only
     */
    function getChosenGifts(address account) external view returns (Gift[] memory);

    //=================//
    // Admin Functions //
    //=================//

    /**
     * @notice Set signer to new account
     * @param newSigner - the addres of the new owner
     */
    function setSigner(address newSigner) external;

    /**
     * @notice Set the time that adding gifts ends
     * @param newRegistrationEnd - the new s_registerationEnd time
     */
    function setRegistrationEnd(uint256 newRegistrationEnd) external;

    /**
     * @notice Set the time that claiming a random gift starts
     * @param newRedemptionStart - the new s_redemptionStart time
     */
    function setRedemptionStart(uint256 newRedemptionStart) external;

    /**
     * @notice Function used to update the subscription ID
     * @param newSubscriptionId - the chainlink vrf subscription id
     */
    function setSubscriptionId(uint64 newSubscriptionId) external;

    /**
     * @notice Function used to update the gas lane used by VRF
     * @param newKeyHash - the keyhash of the gaslane that VRF uses
     */
    function setKeyHash(bytes32 newKeyHash) external;

    /**
     * @notice Function used to update the callback gas limit
     * @param newCallbackGasLimit - the gas limit of the fulfillRandomWords callback
     */
    function setCallbackGasLimit(uint32 newCallbackGasLimit) external;

    /**
     * @notice Function that pauses the contract
     * @param isPaused - now what're we turning the pause to!?
     */
    function setPaused(bool isPaused) external;

    /**
     * @notice Function that allows the owner to update the max size of the pool
     * @param newMaxGifts - new max number of gifts in the pool
     */
    function setMaxGifts(uint32 newMaxGifts) external;

    //================//
    // Pool Shuffling //
    //================//

    /**
     * @notice Function that requests a random seed from VRF
     */
    function requestSeed() external;

    /**
     * @notice Function that uses the SEED to shuffle the index array.
     * Just in case this ends up being a large array (Ho Ho Ho!), we will make it possible
     * to break this operation up into multiple calls
     * @param startPosition - the starting index we're shuffling
     * @param endPosition - the ending index we're shuffling
     */
    function shuffleRandomGiftIndices(uint32 startPosition, uint32 endPosition) external;

    //===================//
    // Signing/Verifying //
    //===================//

    /**
     * @notice Function used to hash a gift
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     */
    function hashGift(address gifter, address nft, uint256 tokenId) external view returns (bytes32);

    /**
     * @notice Function that valifates that the gift hash signature was signed by the designated signer authority
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     * @param sig - the signature of the gift hash
     */
    function validateGiftHashSignature(address gifter, address nft, uint256 tokenId, bytes calldata sig)
        external
        view
        returns (bool);

    //======//
    // Misc //
    //======//

    /**
     * @notice Function used to determine if a contract supports 721 interface
     * @param nft - the address of an NFT
     */
    function giftSupports721(address nft) external view returns (bool);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Prohibition / VenturePunk,LLC
// Written By: Thomas Lipari (thom.eth)
pragma solidity ^0.8.23;

/**
 * @title The TokenGatedSantaProtocol contract
 * @author Thomas Lipari (thom.eth)
 * @notice An extension of the SantaProtocol contract that adds token gating
 */
interface ITokenGatedSantaProtocol {
    //========//
    // Errors //
    //========//

    error NotTokenGatedCollectionHolder();
    error NotTokenGatedTokenHolder();
    error NotTokenGateCollection();
    error TokenGateLimitReached();
    error PoolIsNotTokenGated();
    error TokenGated();

    //=========================//
    // Gift Exchange Functions //
    //=========================//

    /**
     * @notice Disabled because token gate requires more values
     * @param nft - the address of the NFT being added
     * @param tokenId - the token id of the NFT being added
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateTokenId - the token id of the NFT being used to gate access to the protocol
     * @param sig - a message signed by the signer address verifying the NFT is eligible
     */
    function addGift(address nft, uint256 tokenId, address tokenGateNft, uint256 tokenGateTokenId, bytes calldata sig)
        external
        returns (address giftAddress, uint256 giftTokenId);

    //================//
    // View Functions //
    //================//

    /**
     * @notice Get the the address of the TokenGate NFT
     */
    function getTokenGateContract() external view returns (address);

    /**
     * @notice Function that checks if an NFT is eligible to be used to gate access to the protocol
     * @param account - the account that is using the NFT
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateTokenId - the token id of the NFT being used to gate access to the protocol
     */
    function getTokenGateEligibility(address account, address tokenGateNft, uint256 tokenGateTokenId)
        external
        view
        returns (bool eligible);

    /**
     * @notice Function that checks if the token gate support delegates
     */
    function getSupportsDelegates() external view returns (bool);

    //=================//
    // Admin Functions //
    //=================//

    /**
     * @notice Function that allows the owners to update the address of the Token Gate NFT
     * @param newTokenGateNft - new address of the Token Gate NFT
     */
    function setTokenGateContract(address newTokenGateNft) external;

    /**
     * @notice Function that allows the owners to update the address of the Token Gate NFT
     * @param newTokenGateLimit - new address of the Token Gate NFT
     */
    function setTokenGateLimit(uint32 newTokenGateLimit) external;

    /**
     * @notice Function that allows the owners to toggle whether or not delegated wallets are supported
     */
    function toggleSupportsDelegates() external;

    //===================//
    // Signing/Verifying //
    //===================//

    /**
     * @notice Function used to hash a gift along with tokengate information
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateTokenId - the token id of the NFT being used to gate access to the protocol
     */
    function hashTokenGateGift(
        address gifter,
        address nft,
        uint256 tokenId,
        address tokenGateNft,
        uint256 tokenGateTokenId
    ) external view returns (bytes32);

    /**
     * @notice Function that validates that the gift hash signature was signed by the designated signer authority
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateTokenId - the token id of the NFT being used to gate access to the protocol
     * @param sig - the signature of the gift hash
     */
    function validateTokenGateSignature(
        address gifter,
        address nft,
        uint256 tokenId,
        address tokenGateNft,
        uint256 tokenGateTokenId,
        bytes calldata sig
    ) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import {VRFCoordinatorV2Interface} from "chainlink/v0.8/vrf/interfaces/VRFCoordinatorV2Interface.sol";
import {VRFConsumerBaseV2} from "chainlink/v0.8/vrf/VRFConsumerBaseV2.sol";

/**
 * @title The RandomNumberConsumerV2 contract
 * @notice A contract that gets random values from Chainlink VRF V2
 */
contract RandomNumberConsumerV2 is VRFConsumerBaseV2 {
    VRFCoordinatorV2Interface immutable COORDINATOR;

    // VRF subscription ID.
    uint64 internal s_subscriptionId;

    // The gas lane to use, which specifies the maximum gas price to bump to.
    // For a list of available gas lanes on each network,
    // see https://docs.chain.link/docs/vrf-contracts/#configurations
    bytes32 internal s_keyHash;

    // Depends on the number of requested values that you want sent to the
    // fulfillRandomWords() function. Storing each word costs about 20,000 gas.
    uint32 internal CALLBACK_GAS_LIMIT = 100000;

    // The default is 3, but you can set this higher.
    uint16 constant REQUEST_CONFIRMATIONS = 3;

    // For this example, retrieve 2 random values in one request.
    // Cannot exceed VRFCoordinatorV2.MAX_NUM_WORDS.
    uint32 constant NUM_WORDS = 1;

    uint256[] public s_randomWords;
    uint256 public s_requestId;

    mapping(uint256 => address) public s_requestIdMapping;
    mapping(address => uint256[]) s_randomWordMapping;

    event ReturnedRandomness(uint256 requestId, uint256[] randomWords);
    event NewRandomNumberConsumerOwner(address newOwner);

    /**
     * @notice Constructor inherits VRFConsumerBaseV2
     *
     * @param subscriptionId - the subscription ID that this contract uses for funding requests
     * @param vrfCoordinator - coordinator, check https://docs.chain.link/docs/vrf-contracts/#configurations
     * @param keyHash - the gas lane to use, which specifies the maximum gas price to bump to
     */
    constructor(uint64 subscriptionId, address vrfCoordinator, bytes32 keyHash) VRFConsumerBaseV2(vrfCoordinator) {
        COORDINATOR = VRFCoordinatorV2Interface(vrfCoordinator);
        s_keyHash = keyHash;
        s_subscriptionId = subscriptionId;
    }

    /**
     * @notice Requests randomness
     * Assumes the subscription is funded sufficiently; "Words" refers to unit of data in Computer Science
     */
    function requestRandomWords(uint32 numberOfWords) internal returns (uint256 requestId) {
        // Will revert if subscription is not set and funded.
        requestId = COORDINATOR.requestRandomWords(
            s_keyHash, s_subscriptionId, REQUEST_CONFIRMATIONS, CALLBACK_GAS_LIMIT, numberOfWords
        );
        s_requestIdMapping[requestId] = msg.sender;
    }

    /**
     * @notice Callback function used by VRF Coordinator
     *
     * @param requestId - id of the request
     * @param randomWords - array of random results from VRF Coordinator
     */
    function fulfillRandomWords(uint256 requestId, uint256[] memory randomWords) internal virtual override {
        s_randomWordMapping[s_requestIdMapping[requestId]] = randomWords;
        emit ReturnedRandomness(requestId, randomWords);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 248 bits");
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 240 bits");
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 232 bits");
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 224 bits");
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 216 bits");
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 208 bits");
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 200 bits");
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 192 bits");
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 184 bits");
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 176 bits");
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 168 bits");
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 160 bits");
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 152 bits");
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 144 bits");
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 136 bits");
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 128 bits");
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 120 bits");
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 112 bits");
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 104 bits");
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 96 bits");
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 88 bits");
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 80 bits");
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 72 bits");
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 64 bits");
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 56 bits");
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 48 bits");
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 40 bits");
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 32 bits");
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 24 bits");
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 16 bits");
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 8 bits");
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Prohibition / VenturePunk,LLC
// Written By: Thomas Lipari (thom.eth)
pragma solidity ^0.8.23;

import {IERC721Receiver} from "openzeppelin-contracts/token/ERC721/IERC721Receiver.sol";
import {ECDSA} from "openzeppelin-contracts/utils/cryptography/ECDSA.sol";
import {IERC721} from "openzeppelin-contracts/token/ERC721/IERC721.sol";
import {SafeMath} from "openzeppelin-contracts/utils/math/SafeMath.sol";
import {SafeCast} from "openzeppelin-contracts/utils/math/SafeCast.sol";
import {IERC165} from "openzeppelin-contracts/interfaces/IERC165.sol";
import {Ownable} from "openzeppelin-contracts/access/Ownable.sol";

import {RandomNumberConsumerV2} from "src/util/RandomNumberConsumerV2.sol";
import {WrappedPresent} from "./WrappedPresent.sol";
import {ISantaProtocol} from "./ISantaProtocol.sol";

/**
 * @title The SantaProtocol contract
 * @author Thomas Lipari (thom.eth)
 * @notice A contract that lets people deposit an NFT into a pool and then later lets them randomly redeem another one using Chainlink VRF2
 */
contract SantaProtocol is Ownable, IERC721Receiver, ISantaProtocol, RandomNumberConsumerV2 {
    using ECDSA for bytes32;
    using SafeMath for uint256;
    using SafeCast for uint256;

    //=========//
    // Storage //
    //=========//

    /* Constants */

    // The Present NFT that's minted to users when they add to the pool
    WrappedPresent public immutable PRESENT_NFT;

    /* Private values */

    // Address that signs verification messages when adding gifts
    address internal s_signer;
    // Blocktime that adding gifts to the pool ends
    uint32 internal s_registrationEnd;
    // Blocktime that redemptions start
    uint32 internal s_redemptionStart;
    // The Gift Pool
    Gift[] internal s_giftPool;
    // The array to map Present Token IDs to gifts in the Gift Pool
    uint32[] internal s_giftPoolIndices;
    // Mapping of gifts chosen by each user
    mapping(address user => Gift[] unwrappedGifts) internal s_chosenGifts;

    /* Config */

    // The state that pauses the contract's functionality
    bool public PAUSED = false;
    // The state that says that the gift pool has been shuffled
    bool public SHUFFLED = false;
    // Maximum allowed gifts in the pool
    uint32 public MAX_GIFTS = 50000;
    // The state that dictates whether adding a gift requires a signature
    bool public REQUIRES_SIGNATURE = true;

    /* Chainlink VRF */

    // The random word returned by VRF used as a seed for the randomness
    uint256 public SEED;
    // The request ID for the SEED
    uint256 public SEED_REQUEST_ID;

    //=============//
    // Constructor //
    //=============//

    /**
     * @notice Constructor inherits RandomNumberConsumerV2
     * @param subscriptionId - the subscription ID that this contract uses for funding Chainlink VFR requests
     * @param vrfCoordinator - coordinator, check https://docs.chain.link/docs/vrf-contracts/#configurations
     * @param keyHash - the Chainlink gas lane to use, which specifies the maximum gas price to bump to
     * @param registrationEnd - the time that registration/adding gifts ends
     * @param redemptionStart - the time that participants can begin redeeming their gifts
     */
    constructor(
        uint64 subscriptionId,
        address vrfCoordinator,
        bytes32 keyHash,
        uint256 registrationEnd,
        uint256 redemptionStart,
        address signer,
        address presentNft
    ) RandomNumberConsumerV2(subscriptionId, vrfCoordinator, keyHash) {
        s_registrationEnd = registrationEnd.toUint32();
        s_redemptionStart = redemptionStart.toUint32();
        s_signer = signer;
        PRESENT_NFT = WrappedPresent(presentNft);
    }

    //=========================//
    // Gift Exchange Functions //
    //=========================//

    /**
     * @notice Function used to add an NFT to the pool.
     * @param nft - the address of the NFT being added
     * @param tokenId - the token id of the NFT being added
     * @param sig - a message signed by the signer address verifying the NFT is eligible
     */
    function addGift(address nft, uint256 tokenId, bytes calldata sig)
        public
        virtual
        isNotPaused
        returns (address giftAddress, uint256 giftTokenId)
    {
        // Run validity check
        _addGiftChecks(nft, tokenId);
        // If the signature isn't valid
        if (!_validateGiftHashSignatureIfRequired(msg.sender, nft, tokenId, sig)) revert InvalidSignature();
        // Add the gift to the pool and mint a PresentNft to the user that added the gift
        (giftAddress, giftTokenId) = _addGiftTransfers(nft, tokenId);
    }

    /**
     * @notice Function used to burn a Present NFT and redeem the gift in the pool it's been tied to
     * @param tokenId - the token id of the Present NFT being burned
     */
    function openGift(uint256 tokenId)
        public
        virtual
        isNotPaused
        returns (address chosenGiftAddress, uint256 chosenGiftTokenId)
    {
        // Run validity check
        _openGiftChecks(tokenId);
        // Open the gift and transfer it to the user
        (chosenGiftAddress, chosenGiftTokenId) = _openGiftTransfers(tokenId);
    }

    //================//
    // View Functions //
    //================//

    /**
     * @notice Get the number of NFTs in the gift pool
     */
    function getSigner() public view returns (address) {
        return s_signer;
    }

    /**
     * @notice Get the end of the deposit window
     */
    function getRegistrationEnd() public view returns (uint256) {
        return uint256(s_registrationEnd);
    }

    /**
     * @notice Get start of the redemption window
     */
    function getRedemptionStart() public view returns (uint256) {
        return uint256(s_redemptionStart);
    }

    /**
     * @notice Get the number of NFTs in the gift pool
     */
    function getGiftPoolSize() public view returns (uint256) {
        return s_giftPool.length;
    }

    /**
     * @notice Get the whole gift pool
     * @dev intended for offchain use only
     */
    function getGiftPool() public view returns (Gift[] memory) {
        return s_giftPool;
    }

    /**
     * @notice Get the number of gifts that a user has randomly chosen
     * @param account - the wallet address of the user
     */
    function getNumberOfChosenGifts(address account) public view returns (uint256) {
        return s_chosenGifts[account].length;
    }

    /**
     * @notice Get the array of gifts that a user has randomly chosen
     * @param account - the wallet address of the user
     * @dev intended for offchain use only
     */
    function getChosenGifts(address account) public view returns (Gift[] memory) {
        return s_chosenGifts[account];
    }

    //=================//
    // Admin Functions //
    //=================//

    /**
     * @notice Set signer to new account
     * @param newSigner - the addres of the new owner
     */
    function setSigner(address newSigner) public onlyOwner {
        s_signer = newSigner;
    }

    /**
     * @notice Toggle whether adding a gift requires a signature
     */
    function toggleSignatureRequired() public onlyOwner {
        REQUIRES_SIGNATURE = !REQUIRES_SIGNATURE;
    }

    /**
     * @notice Set the time that adding gifts ends
     * @param newRegistrationEnd - the new s_registerationEnd time
     */
    function setRegistrationEnd(uint256 newRegistrationEnd) public onlyOwner {
        if (s_redemptionStart != 0 && newRegistrationEnd >= s_redemptionStart) {
            revert RedemptionMustHappenAfterRegistration();
        }
        s_registrationEnd = newRegistrationEnd.toUint32();
    }

    /**
     * @notice Set the time that claiming a random gift starts
     * @param newRedemptionStart - the new s_redemptionStart time
     */
    function setRedemptionStart(uint256 newRedemptionStart) public onlyOwner {
        if (newRedemptionStart <= s_registrationEnd) revert RedemptionMustHappenAfterRegistration();
        s_redemptionStart = newRedemptionStart.toUint32();
    }

    /**
     * @notice Function used to update the subscription ID
     * @param newSubscriptionId - the chainlink vrf subscription id
     */
    function setSubscriptionId(uint64 newSubscriptionId) public onlyOwner {
        s_subscriptionId = newSubscriptionId;
    }

    /**
     * @notice Function used to update the gas lane used by VRF
     * @param newKeyHash - the keyhash of the gaslane that VRF uses
     */
    function setKeyHash(bytes32 newKeyHash) public onlyOwner {
        s_keyHash = newKeyHash;
    }

    /**
     * @notice Function used to update the callback gas limit
     * @param newCallbackGasLimit - the gas limit of the fulfillRandomWords callback
     */
    function setCallbackGasLimit(uint32 newCallbackGasLimit) public onlyOwner {
        CALLBACK_GAS_LIMIT = newCallbackGasLimit;
    }

    /**
     * @notice Function that pauses the contract
     * @param isPaused - now what're we turning the pause to!?
     */
    function setPaused(bool isPaused) public onlyOwner {
        PAUSED = isPaused;
    }

    /**
     * @notice Function that allows the owner to update the max size of the pool
     * @param newMaxGifts - new max number of gifts in the pool
     */
    function setMaxGifts(uint32 newMaxGifts) public onlyOwner {
        if (s_giftPool.length > newMaxGifts) revert PoolSizeExceedsAmount();
        MAX_GIFTS = newMaxGifts;
    }

    //================//
    // Pool Shuffling //
    //================//

    /**
     * @notice Function that requests a random seed from VRF
     */
    function requestSeed() public onlyOwner {
        require(block.timestamp > s_registrationEnd, "Registration has not ended yet");
        SEED_REQUEST_ID = requestRandomWords(1);
        SHUFFLED = false;
    }

    /**
     * @notice Callback function used by VRF Coordinator
     * @param requestId - id of the request
     * @param randomWords - array of random results from VRF Coordinator
     */
    function fulfillRandomWords(uint256 requestId, uint256[] memory randomWords) internal override {
        if (SEED_REQUEST_ID == requestId) {
            SEED = randomWords[0];
            emit ReturnedRandomness(requestId, randomWords);
        }
    }

    /**
     * @notice Function that uses the SEED to shuffle the index array.
     * Just in case this ends up being a large array (Ho Ho Ho!), we will make it possible
     * to break this operation up into multiple calls
     * @param startPosition - the starting index we're shuffling
     * @param endPosition - the ending index we're shuffling
     */
    function shuffleRandomGiftIndices(uint32 startPosition, uint32 endPosition) public onlyOwner {
        require(SEED != 0, "SEED does not exist");
        require(endPosition >= startPosition, "End position must be after start position");

        // Make sure that we're not going to go out of bounds
        uint32 lastPosition = endPosition > s_giftPool.length - 1 ? uint32(s_giftPool.length - 1) : endPosition;

        // Shuffle the indices in the array
        for (uint32 i = startPosition; i <= lastPosition;) {
            uint32 j = uint32((uint256(keccak256(abi.encode(SEED, i))) % (s_giftPool.length)));
            (s_giftPoolIndices[i], s_giftPoolIndices[j]) = (s_giftPoolIndices[j], s_giftPoolIndices[i]);
            unchecked {
                i++;
            }
        }

        // Once we've shuffled the entire array, set the state to shuffled
        if (lastPosition == s_giftPool.length - 1) {
            SHUFFLED = true;
        }
    }

    //===================//
    // Signing/Verifying //
    //===================//

    /**
     * @notice returns an identifying contract hash to verify this contract
     */
    function getContractHash() public view virtual returns (bytes32) {
        return keccak256(abi.encode(block.chainid, address(this)));
    }

    /**
     * @notice Function used to hash a gift
     *
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     */
    function hashGift(address gifter, address nft, uint256 tokenId) public view virtual returns (bytes32) {
        bytes32 giftHash = keccak256(abi.encode(Gift(gifter, nft, tokenId)));
        return keccak256(abi.encode(getContractHash(), giftHash));
    }

    /**
     * @notice Function that validates that the gift hash signature was signed by the designated signer authority
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     * @param sig - the signature of the gift hash
     */
    function validateGiftHashSignature(address gifter, address nft, uint256 tokenId, bytes calldata sig)
        public
        view
        virtual
        returns (bool)
    {
        bytes32 giftHash = hashGift(gifter, nft, tokenId);
        bytes32 ethSignedMessageHash = giftHash.toEthSignedMessageHash();
        address signer = ethSignedMessageHash.recover(sig);
        return signer == s_signer;
    }

    //==========//
    // Internal //
    //==========//

    /**
     * @notice Checks that the gift is eligible to be added
     * @param nft - the address of the NFT being added
     * @param tokenId - the token id of the NFT being added
     * @dev This function leaves out the signature check so that inherited contracts can use custom logic
     */
    function _addGiftChecks(address nft, uint256 tokenId) internal view {
        // If the registration/adding gift end time has passed
        if (block.timestamp > s_registrationEnd) revert RegistrationEnded();
        // If the pool size has already reached its limit
        if (s_giftPool.length >= MAX_GIFTS) revert MaxGiftsReached();
        // If the gift is already a present, ya do-do!
        if (nft == address(PRESENT_NFT)) revert CannotGiftPresent();
        // If the gift doesn't support the ERC721 interface
        if (!giftSupports721(nft)) revert GiftMustSupportERC721Interface();
        // If the user doesn't own the nft they're adding
        if (IERC721(nft).ownerOf(tokenId) != msg.sender) revert MustOwnTokenId();
        // If the user hasn't individually approved this contract
        if (IERC721(nft).getApproved(tokenId) != address(this)) revert MustApproveContract();
    }

    /**
     * @notice Transfers the gift and present NFTs
     * @param nft - the address of the NFT being added
     * @param tokenId - the token id of the NFT being added
     */
    function _addGiftTransfers(address nft, uint256 tokenId)
        internal
        returns (address giftAddress, uint256 giftTokenId)
    {
        // Transfer the NFT from the caller to this contract
        IERC721(nft).safeTransferFrom(msg.sender, address(this), tokenId);
        // Mint a present NFT to the caller
        PRESENT_NFT.simpleMint(msg.sender);

        // Add the gift to the pool
        s_giftPool.push(Gift({gifter: msg.sender, nft: nft, tokenId: tokenId}));
        s_giftPoolIndices.push(uint32(s_giftPool.length - 1));

        emit GiftAdded(msg.sender, nft, tokenId);

        giftAddress = address(PRESENT_NFT);
        giftTokenId = s_giftPool.length;
    }

    /**
     * @notice Checks that the present is eligible to be opened
     * @param tokenId - the token id of the Present NFT
     */
    function _openGiftChecks(uint256 tokenId) internal view {
        // If redemptions haven't started yet
        if (block.timestamp < s_redemptionStart) revert RedemptionHasNotStarted();
        // If the pool has not been shuffled
        if (!SHUFFLED) revert HasNotBeenShuffled();
        // Make sure the caller owns the tokenId
        if (PRESENT_NFT.ownerOf(tokenId) != msg.sender) revert DoesNotOwnPresent();
    }

    /**
     * @notice Burns the present and sends the chosen gift to the user
     * @param tokenId - the token id of the Present NFT
     */
    function _openGiftTransfers(uint256 tokenId)
        internal
        returns (address chosenGiftAddress, uint256 chosenGiftTokenId)
    {
        // Select the randomized gift associated with the tokenId
        uint32 index = s_giftPoolIndices[tokenId - 1];
        Gift memory chosenGift = s_giftPool[index];

        // Trade the present for a random number
        PRESENT_NFT.burn(tokenId, msg.sender);
        s_chosenGifts[msg.sender].push(chosenGift);
        IERC721(chosenGift.nft).safeTransferFrom(address(this), msg.sender, chosenGift.tokenId);

        emit GiftChosen(msg.sender, tokenId, chosenGift.nft, chosenGift.tokenId);

        return (chosenGift.nft, chosenGift.tokenId);
    }

    /**
     * @notice Function that validates that the gift hash signature was signed by the designated signer authority
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     * @param sig - the signature of the gift hash
     * @dev Bypasses if signature isn't required
     */
    function _validateGiftHashSignatureIfRequired(address gifter, address nft, uint256 tokenId, bytes calldata sig)
        internal
        view
        virtual
        returns (bool)
    {
        if (!REQUIRES_SIGNATURE) return true;
        return validateGiftHashSignature(gifter, nft, tokenId, sig);
    }

    //======//
    // Misc //
    //======//

    /**
     * @notice OpenZeppelin requires ERC721Received implementation.
     */
    function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data)
        public
        override
        returns (bytes4)
    {
        emit ERC721Received(operator, from, tokenId, data);
        return this.onERC721Received.selector;
    }

    /**
     * @notice Function used to determine if a contract supports 721 interface
     * @param nft - the address of an NFT
     */
    function giftSupports721(address nft) public view returns (bool) {
        try IERC165(nft).supportsInterface(type(IERC721).interfaceId) returns (bool result) {
            return result;
        } catch {
            return false;
        }
    }

    //===========//
    // Modifiers //
    //===========//

    modifier isNotPaused() {
        require(!PAUSED, "The NFT Exchange is currently paused.");
        _;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Prohibition / VenturePunk,LLC
// Written By: Thomas Lipari (thom.eth)
pragma solidity ^0.8.23;

import {ECDSA} from "openzeppelin-contracts/utils/cryptography/ECDSA.sol";
import {IERC721} from "openzeppelin-contracts/token/ERC721/IERC721.sol";
import {IDelegateRegistry} from "@delegate-registry/IDelegateRegistry.sol";

import {ITokenGatedSantaProtocol} from "./ITokenGatedSantaProtocol.sol";
import {SantaProtocol} from "./SantaProtocol.sol";

/**
 * @title The TokenGatedSantaProtocol contract
 * @author Thomas Lipari (thom.eth)
 * @notice An extension of the SantaProtocol contract that adds token gating
 */
contract TokenGatedSantaProtocol is SantaProtocol, ITokenGatedSantaProtocol {
    using ECDSA for bytes32;

    //=========//
    // Storage //
    //=========//

    /* Delegate */

    IDelegateRegistry public constant DELEGATE_REGISTRY = IDelegateRegistry(0x00000000000000447e69651d841bD8D104Bed493);

    /* Token Gating */

    // An optional ERC721 that can be used to gate access to the protocol
    IERC721 public TOKEN_GATE_CONTRACT;
    // The maximum number of times an account can participate per owned token ID
    uint32 public TOKEN_GATE_LIMIT;
    // Whether or not delegated wallets are supported
    bool public SUPPORTS_DELEGATES = true;
    // Mapping of token gate NFTs to token IDs to number of times they've been used
    mapping(address tokenGateNft => mapping(uint256 tokenId => uint32 usedCount)) public _tokenGateNftUsed;

    //=============//
    // Constructor //
    //=============//

    /**
     * @notice Constructor inherits SantaProtocol and RandomNumberConsumerV2
     * @param subscriptionId - the subscription ID that this contract uses for funding Chainlink VFR requests
     * @param vrfCoordinator - coordinator, check https://docs.chain.link/docs/vrf-contracts/#configurations
     * @param keyHash - the Chainlink gas lane to use, which specifies the maximum gas price to bump to
     * @param registrationEnd - the time that registration/adding gifts ends
     * @param redemptionStart - the time that participants can begin redeeming their gifts
     * @param signer - the address of the signer that signs the gift hashes
     * @param presentNft - the address of the NFT that represents the gifts in the pool
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateLimit - the maximum number of times an account can participate per owned token ID
     */
    constructor(
        uint64 subscriptionId,
        address vrfCoordinator,
        bytes32 keyHash,
        uint256 registrationEnd,
        uint256 redemptionStart,
        address signer,
        address presentNft,
        address tokenGateNft,
        uint32 tokenGateLimit
    ) SantaProtocol(subscriptionId, vrfCoordinator, keyHash, registrationEnd, redemptionStart, signer, presentNft) {
        if (tokenGateNft != address(0)) {
            TOKEN_GATE_CONTRACT = IERC721(tokenGateNft);
            TOKEN_GATE_LIMIT = tokenGateLimit;
        }
    }

    //=========================//
    // Gift Exchange Functions //
    //=========================//

    /**
     * @notice Disabled because token gate requires more values
     * @param nft - the address of the NFT being added
     * @param tokenId - the token id of the NFT being added
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateTokenId - the token id of the NFT being used to gate access to the protocol
     * @param sig - a message signed by the signer address verifying the NFT is eligible
     */
    function addGift(address nft, uint256 tokenId, address tokenGateNft, uint256 tokenGateTokenId, bytes calldata sig)
        public
        virtual
        isNotPaused
        returns (address giftAddress, uint256 giftTokenId)
    {
        // If the pool isn't token gated, revert
        if (address(TOKEN_GATE_CONTRACT) == address(0)) revert PoolIsNotTokenGated();
        // Run validity check
        _addGiftChecks(nft, tokenId);
        // If the NFT doesn't pass token gating
        _tokenGate(msg.sender, tokenGateNft, tokenGateTokenId);
        // If the signature isn't valid, revert
        if (!_validateTokenGateSignatureIfRequired(msg.sender, nft, tokenId, tokenGateNft, tokenGateTokenId, sig)) {
            revert InvalidSignature();
        }

        // Add the gift to the pool and mint a PresentNft to the user that added the gift
        (giftAddress, giftTokenId) = _addGiftTransfers(nft, tokenId);
    }

    /**
     * @notice Disabled because token gate requires more values
     * @param nft - the address of the NFT being added
     * @param tokenId - the token id of the NFT being added
     * @param sig - a message signed by the signer address verifying the NFT is eligible
     */
    function addGift(address nft, uint256 tokenId, bytes calldata sig)
        public
        virtual
        override(SantaProtocol)
        isNotPaused
        returns (address giftAddress, uint256 giftTokenId)
    {
        if (address(TOKEN_GATE_CONTRACT) != address(0)) revert TokenGated();
        return super.addGift(nft, tokenId, sig);
    }

    //================//
    // View Functions //
    //================//

    /**
     * @notice Get the the address of the TokenGate NFT
     */
    function getTokenGateContract() public view returns (address) {
        return address(TOKEN_GATE_CONTRACT);
    }

    /**
     * @notice Function that checks if an NFT is eligible to be used to gate access to the protocol
     * @param account - the account that is using the NFT
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateTokenId - the token id of the NFT being used to gate access to the protocol
     */
    function getTokenGateEligibility(address account, address tokenGateNft, uint256 tokenGateTokenId)
        public
        view
        virtual
        returns (bool eligible)
    {
        if (address(TOKEN_GATE_CONTRACT) == address(0)) return true;
        if (tokenGateNft != address(TOKEN_GATE_CONTRACT)) return false;
        if (!_validateOwnershipOrDelegation(account, tokenGateNft, tokenGateTokenId)) return false;
        if (TOKEN_GATE_LIMIT == 0) return true;
        if (_tokenGateNftUsed[tokenGateNft][tokenGateTokenId] >= TOKEN_GATE_LIMIT) return false;
        return true;
    }

    /**
     * @notice Function that checks if the token gate support delegates
     */
    function getSupportsDelegates() public view returns (bool) {
        return SUPPORTS_DELEGATES;
    }

    //=================//
    // Admin Functions //
    //=================//

    /**
     * @notice Function that allows the owners to update the address of the Token Gate NFT
     * @param newTokenGateNft - new address of the Token Gate NFT
     */
    function setTokenGateContract(address newTokenGateNft) public onlyOwner {
        TOKEN_GATE_CONTRACT = IERC721(newTokenGateNft);
    }

    /**
     * @notice Function that allows the owners to update the address of the Token Gate NFT
     * @param newTokenGateLimit - new address of the Token Gate NFT
     */
    function setTokenGateLimit(uint32 newTokenGateLimit) public onlyOwner {
        TOKEN_GATE_LIMIT = newTokenGateLimit;
    }

    /**
     * @notice Function that allows the owners to toggle whether or not delegated wallets are supported
     */
    function toggleSupportsDelegates() public onlyOwner {
        SUPPORTS_DELEGATES = !SUPPORTS_DELEGATES;
    }

    //===================//
    // Signing/Verifying //
    //===================//

    /**
     * @notice Function used to hash a gift along with tokengate information
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateTokenId - the token id of the NFT being used to gate access to the protocol
     */
    function hashTokenGateGift(
        address gifter,
        address nft,
        uint256 tokenId,
        address tokenGateNft,
        uint256 tokenGateTokenId
    ) public view override returns (bytes32) {
        bytes32 tokenGateHash = keccak256(abi.encode(tokenGateNft, tokenGateTokenId));
        return keccak256(abi.encode(getContractHash(), hashGift(gifter, nft, tokenId), tokenGateHash));
    }

    /**
     * @notice Function that validates that the gift hash signature was signed by the designated signer authority
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateTokenId - the token id of the NFT being used to gate access to the protocol
     * @param sig - the signature of the gift hash
     */
    function validateTokenGateSignature(
        address gifter,
        address nft,
        uint256 tokenId,
        address tokenGateNft,
        uint256 tokenGateTokenId,
        bytes calldata sig
    ) public view override returns (bool) {
        bytes32 tokenGateHash = hashTokenGateGift(gifter, nft, tokenId, tokenGateNft, tokenGateTokenId);
        bytes32 ethSignedMessageHash = tokenGateHash.toEthSignedMessageHash();
        address signer = ethSignedMessageHash.recover(sig);
        return signer == s_signer;
    }

    //==========//
    // Internal //
    //==========//

    /**
     * @notice Checks if an NFT being used by an account passes token gating.
     * @param account - the account that is using the NFT
     * @param nft - the address of the NFT being used
     * @param tokenId - the token id of the NFT being used
     * @dev Only used if token gating is enabled and updates the tally of times an NFT has been used.
     */
    function _tokenGate(address account, address nft, uint256 tokenId) internal virtual {
        // If the nft isn't the token gate nft...
        if (nft != address(TOKEN_GATE_CONTRACT)) {
            revert NotTokenGateCollection();
        }

        // If there's a limit on each token's use and the token has been used too many times...
        if (TOKEN_GATE_LIMIT != 0 && _tokenGateNftUsed[nft][tokenId] >= TOKEN_GATE_LIMIT) {
            revert TokenGateLimitReached();
        }

        // If the account doesn't own the token nor has been delegated use of it...
        if (!_validateOwnershipOrDelegation(account, nft, tokenId)) {
            revert NotTokenGatedTokenHolder();
        }

        _tokenGateNftUsed[nft][tokenId]++;
    }

    /**
     * @notice Checks if an NFT is either owned by or delegated to an account
     * @param account - the account that is using the NFT
     * @param nft - the address of the NFT being used
     * @param tokenId - the token id of the NFT being used
     */
    function _validateOwnershipOrDelegation(address account, address nft, uint256 tokenId)
        internal
        view
        virtual
        returns (bool)
    {
        if (IERC721(nft).ownerOf(tokenId) == account) return true;
        if (!SUPPORTS_DELEGATES) return false;
        return DELEGATE_REGISTRY.checkDelegateForERC721(account, IERC721(nft).ownerOf(tokenId), nft, tokenId, 0);
    }

    /**
     * @notice Function that validates that the gift hash signature was signed by the designated signer authority
     * @param gifter - address of the gifter
     * @param nft - the address of the NFT being gifted
     * @param tokenId - the id of the NFT being gifted
     * @param tokenGateNft - the address of the NFT being used to gate access to the protocol
     * @param tokenGateTokenId - the token id of the NFT being used to gate access to the protocol
     * @param sig - the signature of the gift hash
     * @dev Bypasses if signature isn't required
     */
    function _validateTokenGateSignatureIfRequired(
        address gifter,
        address nft,
        uint256 tokenId,
        address tokenGateNft,
        uint256 tokenGateTokenId,
        bytes calldata sig
    ) internal view virtual returns (bool) {
        if (!REQUIRES_SIGNATURE) return true;
        return validateTokenGateSignature(gifter, nft, tokenId, tokenGateNft, tokenGateTokenId, sig);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

/** ****************************************************************************
 * @notice Interface for contracts using VRF randomness
 * *****************************************************************************
 * @dev PURPOSE
 *
 * @dev Reggie the Random Oracle (not his real job) wants to provide randomness
 * @dev to Vera the verifier in such a way that Vera can be sure he's not
 * @dev making his output up to suit himself. Reggie provides Vera a public key
 * @dev to which he knows the secret key. Each time Vera provides a seed to
 * @dev Reggie, he gives back a value which is computed completely
 * @dev deterministically from the seed and the secret key.
 *
 * @dev Reggie provides a proof by which Vera can verify that the output was
 * @dev correctly computed once Reggie tells it to her, but without that proof,
 * @dev the output is indistinguishable to her from a uniform random sample
 * @dev from the output space.
 *
 * @dev The purpose of this contract is to make it easy for unrelated contracts
 * @dev to talk to Vera the verifier about the work Reggie is doing, to provide
 * @dev simple access to a verifiable source of randomness. It ensures 2 things:
 * @dev 1. The fulfillment came from the VRFCoordinator
 * @dev 2. The consumer contract implements fulfillRandomWords.
 * *****************************************************************************
 * @dev USAGE
 *
 * @dev Calling contracts must inherit from VRFConsumerBase, and can
 * @dev initialize VRFConsumerBase's attributes in their constructor as
 * @dev shown:
 *
 * @dev   contract VRFConsumer {
 * @dev     constructor(<other arguments>, address _vrfCoordinator, address _link)
 * @dev       VRFConsumerBase(_vrfCoordinator) public {
 * @dev         <initialization with other arguments goes here>
 * @dev       }
 * @dev   }
 *
 * @dev The oracle will have given you an ID for the VRF keypair they have
 * @dev committed to (let's call it keyHash). Create subscription, fund it
 * @dev and your consumer contract as a consumer of it (see VRFCoordinatorInterface
 * @dev subscription management functions).
 * @dev Call requestRandomWords(keyHash, subId, minimumRequestConfirmations,
 * @dev callbackGasLimit, numWords),
 * @dev see (VRFCoordinatorInterface for a description of the arguments).
 *
 * @dev Once the VRFCoordinator has received and validated the oracle's response
 * @dev to your request, it will call your contract's fulfillRandomWords method.
 *
 * @dev The randomness argument to fulfillRandomWords is a set of random words
 * @dev generated from your requestId and the blockHash of the request.
 *
 * @dev If your contract could have concurrent requests open, you can use the
 * @dev requestId returned from requestRandomWords to track which response is associated
 * @dev with which randomness request.
 * @dev See "SECURITY CONSIDERATIONS" for principles to keep in mind,
 * @dev if your contract could have multiple requests in flight simultaneously.
 *
 * @dev Colliding `requestId`s are cryptographically impossible as long as seeds
 * @dev differ.
 *
 * *****************************************************************************
 * @dev SECURITY CONSIDERATIONS
 *
 * @dev A method with the ability to call your fulfillRandomness method directly
 * @dev could spoof a VRF response with any random value, so it's critical that
 * @dev it cannot be directly called by anything other than this base contract
 * @dev (specifically, by the VRFConsumerBase.rawFulfillRandomness method).
 *
 * @dev For your users to trust that your contract's random behavior is free
 * @dev from malicious interference, it's best if you can write it so that all
 * @dev behaviors implied by a VRF response are executed *during* your
 * @dev fulfillRandomness method. If your contract must store the response (or
 * @dev anything derived from it) and use it later, you must ensure that any
 * @dev user-significant behavior which depends on that stored value cannot be
 * @dev manipulated by a subsequent VRF request.
 *
 * @dev Similarly, both miners and the VRF oracle itself have some influence
 * @dev over the order in which VRF responses appear on the blockchain, so if
 * @dev your contract could have multiple VRF requests in flight simultaneously,
 * @dev you must ensure that the order in which the VRF responses arrive cannot
 * @dev be used to manipulate your contract's user-significant behavior.
 *
 * @dev Since the block hash of the block which contains the requestRandomness
 * @dev call is mixed into the input to the VRF *last*, a sufficiently powerful
 * @dev miner could, in principle, fork the blockchain to evict the block
 * @dev containing the request, forcing the request to be included in a
 * @dev different block with a different hash, and therefore a different input
 * @dev to the VRF. However, such an attack would incur a substantial economic
 * @dev cost. This cost scales with the number of blocks the VRF oracle waits
 * @dev until it calls responds to a request. It is for this reason that
 * @dev that you can signal to an oracle you'd like them to wait longer before
 * @dev responding to the request (however this is not enforced in the contract
 * @dev and so remains effective only in the case of unmodified oracle software).
 */
abstract contract VRFConsumerBaseV2 {
  error OnlyCoordinatorCanFulfill(address have, address want);
  // solhint-disable-next-line chainlink-solidity/prefix-immutable-variables-with-i
  address private immutable vrfCoordinator;

  /**
   * @param _vrfCoordinator address of VRFCoordinator contract
   */
  constructor(address _vrfCoordinator) {
    vrfCoordinator = _vrfCoordinator;
  }

  /**
   * @notice fulfillRandomness handles the VRF response. Your contract must
   * @notice implement it. See "SECURITY CONSIDERATIONS" above for important
   * @notice principles to keep in mind when implementing your fulfillRandomness
   * @notice method.
   *
   * @dev VRFConsumerBaseV2 expects its subcontracts to have a method with this
   * @dev signature, and will call it once it has verified the proof
   * @dev associated with the randomness. (It is triggered via a call to
   * @dev rawFulfillRandomness, below.)
   *
   * @param requestId The Id initially returned by requestRandomness
   * @param randomWords the VRF output expanded to the requested number of words
   */
  // solhint-disable-next-line chainlink-solidity/prefix-internal-functions-with-underscore
  function fulfillRandomWords(uint256 requestId, uint256[] memory randomWords) internal virtual;

  // rawFulfillRandomness is called by VRFCoordinator when it receives a valid VRF
  // proof. rawFulfillRandomness then calls fulfillRandomness, after validating
  // the origin of the call
  function rawFulfillRandomWords(uint256 requestId, uint256[] memory randomWords) external {
    if (msg.sender != vrfCoordinator) {
      revert OnlyCoordinatorCanFulfill(msg.sender, vrfCoordinator);
    }
    fulfillRandomWords(requestId, randomWords);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface VRFCoordinatorV2Interface {
  /**
   * @notice Get configuration relevant for making requests
   * @return minimumRequestConfirmations global min for request confirmations
   * @return maxGasLimit global max for request gas limit
   * @return s_provingKeyHashes list of registered key hashes
   */
  function getRequestConfig() external view returns (uint16, uint32, bytes32[] memory);

  /**
   * @notice Request a set of random words.
   * @param keyHash - Corresponds to a particular oracle job which uses
   * that key for generating the VRF proof. Different keyHash's have different gas price
   * ceilings, so you can select a specific one to bound your maximum per request cost.
   * @param subId  - The ID of the VRF subscription. Must be funded
   * with the minimum subscription balance required for the selected keyHash.
   * @param minimumRequestConfirmations - How many blocks you'd like the
   * oracle to wait before responding to the request. See SECURITY CONSIDERATIONS
   * for why you may want to request more. The acceptable range is
   * [minimumRequestBlockConfirmations, 200].
   * @param callbackGasLimit - How much gas you'd like to receive in your
   * fulfillRandomWords callback. Note that gasleft() inside fulfillRandomWords
   * may be slightly less than this amount because of gas used calling the function
   * (argument decoding etc.), so you may need to request slightly more than you expect
   * to have inside fulfillRandomWords. The acceptable range is
   * [0, maxGasLimit]
   * @param numWords - The number of uint256 random values you'd like to receive
   * in your fulfillRandomWords callback. Note these numbers are expanded in a
   * secure way by the VRFCoordinator from a single random value supplied by the oracle.
   * @return requestId - A unique identifier of the request. Can be used to match
   * a request to a response in fulfillRandomWords.
   */
  function requestRandomWords(
    bytes32 keyHash,
    uint64 subId,
    uint16 minimumRequestConfirmations,
    uint32 callbackGasLimit,
    uint32 numWords
  ) external returns (uint256 requestId);

  /**
   * @notice Create a VRF subscription.
   * @return subId - A unique subscription id.
   * @dev You can manage the consumer set dynamically with addConsumer/removeConsumer.
   * @dev Note to fund the subscription, use transferAndCall. For example
   * @dev  LINKTOKEN.transferAndCall(
   * @dev    address(COORDINATOR),
   * @dev    amount,
   * @dev    abi.encode(subId));
   */
  function createSubscription() external returns (uint64 subId);

  /**
   * @notice Get a VRF subscription.
   * @param subId - ID of the subscription
   * @return balance - LINK balance of the subscription in juels.
   * @return reqCount - number of requests for this subscription, determines fee tier.
   * @return owner - owner of the subscription.
   * @return consumers - list of consumer address which are able to use this subscription.
   */
  function getSubscription(
    uint64 subId
  ) external view returns (uint96 balance, uint64 reqCount, address owner, address[] memory consumers);

  /**
   * @notice Request subscription owner transfer.
   * @param subId - ID of the subscription
   * @param newOwner - proposed new owner of the subscription
   */
  function requestSubscriptionOwnerTransfer(uint64 subId, address newOwner) external;

  /**
   * @notice Request subscription owner transfer.
   * @param subId - ID of the subscription
   * @dev will revert if original owner of subId has
   * not requested that msg.sender become the new owner.
   */
  function acceptSubscriptionOwnerTransfer(uint64 subId) external;

  /**
   * @notice Add a consumer to a VRF subscription.
   * @param subId - ID of the subscription
   * @param consumer - New consumer which can use the subscription
   */
  function addConsumer(uint64 subId, address consumer) external;

  /**
   * @notice Remove a consumer from a VRF subscription.
   * @param subId - ID of the subscription
   * @param consumer - Consumer to remove from the subscription
   */
  function removeConsumer(uint64 subId, address consumer) external;

  /**
   * @notice Cancel a subscription
   * @param subId - ID of the subscription
   * @param to - Where to send the remaining LINK to
   */
  function cancelSubscription(uint64 subId, address to) external;

  /*
   * @notice Check to see if there exists a request commitment consumers
   * for all consumers and keyhashes for a given sub.
   * @param subId - ID of the subscription
   * @return true if there exists at least one unfulfilled request for the subscription, false
   * otherwise.
   */
  function pendingRequestExists(uint64 subId) external view returns (bool);
}

// SPDX-License-Identifier: LGPL-3.0-only
// Created By: Prohibition / VenturePunk,LLC
// Written By: Thomas Lipari (thom.eth)
pragma solidity ^0.8.0;

import {ERC721} from "openzeppelin-contracts/token/ERC721/ERC721.sol";
import {Ownable} from "openzeppelin-contracts/access/Ownable.sol";
import {Strings} from "openzeppelin-contracts/utils/Strings.sol";
import {Base64} from "openzeppelin-contracts/utils/Base64.sol";

/**
 * @title The WrappedPresent contract
 * @author Thomas Lipari (thom.eth)
 * @notice A contract that represents a random gift in the Santa.fm Gift Exchange
 */
contract WrappedPresent is Ownable, ERC721 {
    using Strings for uint256;

    // Designated Minter Role
    address public minter;
    // URL for the image returned in the token's metadata
    string internal tokenImage;
    // Counter for tokens minted
    uint256 public totalTokensMinted;
    // Counter for tokens burned
    uint256 public totalTokensBurned;
    // Year of the gift exchange
    uint256 public year;
    // URL of the gift exchange dapp ui
    string public url;

    // Mapping of burned tokens by address
    mapping(address burnerAccount => uint256[] burnedTokenIds) public burnedBy;
    // Mapping of of whether or not a token has been burned
    mapping(uint256 tokenId => bool hasBeenBurned) public burned;

    // Error for when an account doesn't own a token when burning
    error OnlyOwnerCanBurnThroughMinter();

    // Event for burning tokens
    event Burn(uint256 tokenId, address account);

    constructor(
        string memory _name,
        string memory _symbol,
        string memory _tokenImage,
        string memory _url,
        uint256 _year
    ) Ownable() ERC721(_name, _symbol) {
        tokenImage = _tokenImage;
        url = _url;
        year = _year;
    }

    /*
     * Owner Functions
     */

    /**
     * @notice Function that sets the image to be returned in Token URI
     * @param _tokenImage - The tokenId we're checking
     */
    function setTokenImage(string memory _tokenImage) public onlyOwner {
        tokenImage = _tokenImage;
    }

    /**
     * @notice Function that updates the designated minter
     * @param _minter - The address of the new minter
     */
    function setMinter(address _minter) public onlyOwner {
        minter = _minter;
    }

    /**
     * @notice Function that transfers a tokenId
     * @param from - The sender of the transfer
     * @param to - The receiver of the transfer
     * @param tokenId - TokenID of the token being transferred
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /*
     * Minter Functions
     */

    /**
     * @notice Function that mints an NFT. Can only be called by `minter`
     * @param to - The address that receives the minted NFT
     */
    function simpleMint(address to) public onlyMinter {
        // increment number of tokens minted
        totalTokensMinted += 1;

        // mint the token to the address
        _mint(to, totalTokensMinted);
    }

    /**
     * @notice Function that burns a present
     * @param tokenId - The tokenId to burn
     * @param account - The account that owns the token
     *
     * @dev [WARNING!] Be sure that when using this function, the `account` actually owns `tokenId`
     */
    function burn(uint256 tokenId, address account) public onlyMinter {
        // Since _burn does not check approval for burning, we have to make sure that the
        // designated Minter only passes the correct owner of the token as `account`
        if (ownerOf(tokenId) != account) revert OnlyOwnerCanBurnThroughMinter();

        // burn the token.
        _burn(tokenId);

        // keep track of burnings
        totalTokensBurned += 1;
        burnedBy[account].push(tokenId);
        burned[tokenId] = true;

        // emit our event
        emit Burn(tokenId, account);
    }

    /*
     * URI Functions
     */

    /**
     * @notice Function that returns the Contract URI
     */
    function contractURI() public view returns (string memory) {
        return string(
            abi.encodePacked(
                "data:application/json;base64,",
                Base64.encode(
                    bytes(
                        string(
                            abi.encodePacked(
                                '{"name": "Santa.FM NFT Gift Exchange", ',
                                '"description": "Santa.fm Presents are NFTs from the NFT Gift Exchange pool. Add a NFT gift to the pool and receive a NFT Present in return that you open on Christmas morning.", ',
                                '"external_link": "',
                                url,
                                '" }'
                            )
                        )
                    )
                )
            )
        );
    }

    /**
     * @notice Function that returns the URI for a token
     * @param id - Token ID we're referencing
     */
    function tokenURI(uint256 id) public view override returns (string memory) {
        // Fail if token hasn't been minted
        require(id <= totalTokensMinted);

        // Fail if token has been burned
        require(!burned[id]);

        return string(
            abi.encodePacked(
                "data:application/json;base64,",
                Base64.encode(
                    bytes(
                        string(
                            abi.encodePacked(
                                '{"name": "Wrapped Present #',
                                id.toString(),
                                '", ',
                                '"description": "Wrapped Presents are given to you when you add an NFT to the Gift Dexchange. Use this present to redeem a random gift on Christmas Day!", ',
                                '"image": "',
                                tokenImage,
                                '", "attributes": [{"trait_type": "Gift", "value": "Wrapped Present"}, {"trait_type": "Year", "value": "',
                                year.toString(),
                                '" }]}'
                            )
                        )
                    )
                )
            )
        );
    }

    /*
     * Modifiers
     */

    modifier onlyMinter() {
        require(msg.sender == minter);
        _;
    }
}

{
  "compilationTarget": {
    "src/contracts/santa/TokenGatedSantaProtocol.sol": "TokenGatedSantaProtocol"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 20000
  },
  "remappings": [
    ":@delegate-registry/=lib/delegate-registry/src/",
    ":@eth-optimism/=lib/chainlink/contracts/node_modules/@eth-optimism/contracts/",
    ":@openzeppelin/=lib/chainlink/contracts/node_modules/@openzeppelin/",
    ":ERC721A-Upgradeable/=lib/ERC721A-Upgradeable/contracts/",
    ":ERC721A/=lib/ERC721A/contracts/",
    ":chainlink/=lib/chainlink/contracts/src/",
    ":delegate-registry/=lib/delegate-registry/",
    ":diamond-2-hardhat/=lib/diamond-2-hardhat/contracts/",
    ":diamond/=lib/diamond-2-hardhat/contracts/",
    ":ds-test/=lib/forge-std/lib/ds-test/src/",
    ":erc4626-tests/=lib/operator-filter-registry/lib/openzeppelin-contracts/lib/erc4626-tests/",
    ":forge-std/=lib/forge-std/src/",
    ":hardhat/=lib/chainlink/contracts/node_modules/hardhat/",
    ":murky/=lib/delegate-registry/lib/murky/",
    ":nouns-monorepo/=lib/nouns-monorepo/packages/nouns-contracts/contracts/",
    ":openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    ":openzeppelin-contracts/=lib/openzeppelin-contracts/contracts/",
    ":openzeppelin/=lib/delegate-registry/lib/openzeppelin-contracts/contracts/",
    ":operator-filter-registry/=lib/operator-filter-registry/src/",
    ":src/=src/"
  ]
}