// SPDX-License-Identifier: MIT

// Sources flattened with hardhat v2.9.9 https://hardhat.org

// File contracts/openzeppelin/contracts/utils/introspection/IERC165.sol

// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
	/**
	 * @dev Returns true if this contract implements the interface defined by
	 * `interfaceId`. See the corresponding
	 * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
	 * to learn more about how these ids are created.
	 *
	 * This function call must use less than 30 000 gas.
	 */
	function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File contracts/openzeppelin/contracts/token/ERC721/IERC721.sol

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
	/**
	 * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
	 */
	event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

	/**
	 * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
	 */
	event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

	/**
	 * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
	 */
	event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

	/**
	 * @dev Returns the number of tokens in ``owner``'s account.
	 */
	function balanceOf(address owner) external view returns (uint256 balance);

	/**
	 * @dev Returns the owner of the `tokenId` token.
	 *
	 * Requirements:
	 *
	 * - `tokenId` must exist.
	 */
	function ownerOf(uint256 tokenId) external view returns (address owner);

	/**
	 * @dev Safely transfers `tokenId` token from `from` to `to`.
	 *
	 * Requirements:
	 *
	 * - `from` cannot be the zero address.
	 * - `to` cannot be the zero address.
	 * - `tokenId` token must exist and be owned by `from`.
	 * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
	 * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
	 *
	 * Emits a {Transfer} event.
	 */
	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId,
		bytes calldata data
	) external;

	/**
	 * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
	 * are aware of the ERC721 protocol to prevent tokens from being forever locked.
	 *
	 * Requirements:
	 *
	 * - `from` cannot be the zero address.
	 * - `to` cannot be the zero address.
	 * - `tokenId` token must exist and be owned by `from`.
	 * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
	 * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
	 *
	 * Emits a {Transfer} event.
	 */
	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId
	) external;

	/**
	 * @dev Transfers `tokenId` token from `from` to `to`.
	 *
	 * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
	 *
	 * Requirements:
	 *
	 * - `from` cannot be the zero address.
	 * - `to` cannot be the zero address.
	 * - `tokenId` token must be owned by `from`.
	 * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
	 *
	 * Emits a {Transfer} event.
	 */
	function transferFrom(
		address from,
		address to,
		uint256 tokenId
	) external;

	/**
	 * @dev Gives permission to `to` to transfer `tokenId` token to another account.
	 * The approval is cleared when the token is transferred.
	 *
	 * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
	 *
	 * Requirements:
	 *
	 * - The caller must own the token or be an approved operator.
	 * - `tokenId` must exist.
	 *
	 * Emits an {Approval} event.
	 */
	function approve(address to, uint256 tokenId) external;

	/**
	 * @dev Approve or remove `operator` as an operator for the caller.
	 * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
	 *
	 * Requirements:
	 *
	 * - The `operator` cannot be the caller.
	 *
	 * Emits an {ApprovalForAll} event.
	 */
	function setApprovalForAll(address operator, bool _approved) external;

	/**
	 * @dev Returns the account approved for `tokenId` token.
	 *
	 * Requirements:
	 *
	 * - `tokenId` must exist.
	 */
	function getApproved(uint256 tokenId) external view returns (address operator);

	/**
	 * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
	 *
	 * See {setApprovalForAll}
	 */
	function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// File contracts/openzeppelin/contracts/token/ERC721/IERC721Receiver.sol

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
	/**
	 * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
	 * by `operator` from `from`, this function is called.
	 *
	 * It must return its Solidity selector to confirm the token transfer.
	 * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
	 *
	 * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
	 */
	function onERC721Received(
		address operator,
		address from,
		uint256 tokenId,
		bytes calldata data
	) external returns (bytes4);
}

// File contracts/openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol

// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
	/**
	 * @dev Returns the token collection name.
	 */
	function name() external view returns (string memory);

	/**
	 * @dev Returns the token collection symbol.
	 */
	function symbol() external view returns (string memory);

	/**
	 * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
	 */
	function tokenURI(uint256 tokenId) external view returns (string memory);
}

// File contracts/openzeppelin/contracts/utils/Address.sol

// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
	/**
	 * @dev Returns true if `account` is a contract.
	 *
	 * [IMPORTANT]
	 * ====
	 * It is unsafe to assume that an address for which this function returns
	 * false is an externally-owned account (EOA) and not a contract.
	 *
	 * Among others, `isContract` will return false for the following
	 * types of addresses:
	 *
	 *  - an externally-owned account
	 *  - a contract in construction
	 *  - an address where a contract will be created
	 *  - an address where a contract lived, but was destroyed
	 * ====
	 *
	 * [IMPORTANT]
	 * ====
	 * You shouldn't rely on `isContract` to protect against flash loan attacks!
	 *
	 * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
	 * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
	 * constructor.
	 * ====
	 */
	function isContract(address account) internal view returns (bool) {
		// This method relies on extcodesize/address.code.length, which returns 0
		// for contracts in construction, since the code is only stored at the end
		// of the constructor execution.

		return account.code.length > 0;
	}

	/**
	 * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
	 * `recipient`, forwarding all available gas and reverting on errors.
	 *
	 * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
	 * of certain opcodes, possibly making contracts go over the 2300 gas limit
	 * imposed by `transfer`, making them unable to receive funds via
	 * `transfer`. {sendValue} removes this limitation.
	 *
	 * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
	 *
	 * IMPORTANT: because control is transferred to `recipient`, care must be
	 * taken to not create reentrancy vulnerabilities. Consider using
	 * {ReentrancyGuard} or the
	 * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
	 */
	function sendValue(address payable recipient, uint256 amount) internal {
		require(address(this).balance >= amount, "Address: insufficient balance");

		(bool success, ) = recipient.call{ value: amount }("");
		require(success, "Address: unable to send value, recipient may have reverted");
	}

	/**
	 * @dev Performs a Solidity function call using a low level `call`. A
	 * plain `call` is an unsafe replacement for a function call: use this
	 * function instead.
	 *
	 * If `target` reverts with a revert reason, it is bubbled up by this
	 * function (like regular Solidity function calls).
	 *
	 * Returns the raw returned data. To convert to the expected return value,
	 * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
	 *
	 * Requirements:
	 *
	 * - `target` must be a contract.
	 * - calling `target` with `data` must not revert.
	 *
	 * _Available since v3.1._
	 */
	function functionCall(address target, bytes memory data) internal returns (bytes memory) {
		return functionCall(target, data, "Address: low-level call failed");
	}

	/**
	 * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
	 * `errorMessage` as a fallback revert reason when `target` reverts.
	 *
	 * _Available since v3.1._
	 */
	function functionCall(
		address target,
		bytes memory data,
		string memory errorMessage
	) internal returns (bytes memory) {
		return functionCallWithValue(target, data, 0, errorMessage);
	}

	/**
	 * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
	 * but also transferring `value` wei to `target`.
	 *
	 * Requirements:
	 *
	 * - the calling contract must have an ETH balance of at least `value`.
	 * - the called Solidity function must be `payable`.
	 *
	 * _Available since v3.1._
	 */
	function functionCallWithValue(
		address target,
		bytes memory data,
		uint256 value
	) internal returns (bytes memory) {
		return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
	}

	/**
	 * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
	 * with `errorMessage` as a fallback revert reason when `target` reverts.
	 *
	 * _Available since v3.1._
	 */
	function functionCallWithValue(
		address target,
		bytes memory data,
		uint256 value,
		string memory errorMessage
	) internal returns (bytes memory) {
		require(address(this).balance >= value, "Address: insufficient balance for call");
		require(isContract(target), "Address: call to non-contract");

		(bool success, bytes memory returndata) = target.call{ value: value }(data);
		return verifyCallResult(success, returndata, errorMessage);
	}

	/**
	 * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
	 * but performing a static call.
	 *
	 * _Available since v3.3._
	 */
	function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
		return functionStaticCall(target, data, "Address: low-level static call failed");
	}

	/**
	 * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
	 * but performing a static call.
	 *
	 * _Available since v3.3._
	 */
	function functionStaticCall(
		address target,
		bytes memory data,
		string memory errorMessage
	) internal view returns (bytes memory) {
		require(isContract(target), "Address: static call to non-contract");

		(bool success, bytes memory returndata) = target.staticcall(data);
		return verifyCallResult(success, returndata, errorMessage);
	}

	/**
	 * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
	 * but performing a delegate call.
	 *
	 * _Available since v3.4._
	 */
	function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
		return functionDelegateCall(target, data, "Address: low-level delegate call failed");
	}

	/**
	 * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
	 * but performing a delegate call.
	 *
	 * _Available since v3.4._
	 */
	function functionDelegateCall(
		address target,
		bytes memory data,
		string memory errorMessage
	) internal returns (bytes memory) {
		require(isContract(target), "Address: delegate call to non-contract");

		(bool success, bytes memory returndata) = target.delegatecall(data);
		return verifyCallResult(success, returndata, errorMessage);
	}

	/**
	 * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
	 * revert reason using the provided one.
	 *
	 * _Available since v4.3._
	 */
	function verifyCallResult(
		bool success,
		bytes memory returndata,
		string memory errorMessage
	) internal pure returns (bytes memory) {
		if (success) {
			return returndata;
		} else {
			// Look for revert reason and bubble it up if present
			if (returndata.length > 0) {
				// The easiest way to bubble the revert reason is using memory via assembly

				assembly {
					let returndata_size := mload(returndata)
					revert(add(32, returndata), returndata_size)
				}
			} else {
				revert(errorMessage);
			}
		}
	}
}

// File contracts/openzeppelin/contracts/utils/Context.sol

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
	function _msgSender() internal view virtual returns (address) {
		return msg.sender;
	}

	function _msgData() internal view virtual returns (bytes calldata) {
		return msg.data;
	}
}

// File contracts/openzeppelin/contracts/utils/Strings.sol

// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
	bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

	/**
	 * @dev Converts a `uint256` to its ASCII `string` decimal representation.
	 */
	function toString(uint256 value) internal pure returns (string memory) {
		// Inspired by OraclizeAPI's implementation - MIT licence
		// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

		if (value == 0) {
			return "0";
		}
		uint256 temp = value;
		uint256 digits;
		while (temp != 0) {
			digits++;
			temp /= 10;
		}
		bytes memory buffer = new bytes(digits);
		while (value != 0) {
			digits -= 1;
			buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
			value /= 10;
		}
		return string(buffer);
	}

	/**
	 * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
	 */
	function toHexString(uint256 value) internal pure returns (string memory) {
		if (value == 0) {
			return "0x00";
		}
		uint256 temp = value;
		uint256 length = 0;
		while (temp != 0) {
			length++;
			temp >>= 8;
		}
		return toHexString(value, length);
	}

	/**
	 * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
	 */
	function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
		bytes memory buffer = new bytes(2 * length + 2);
		buffer[0] = "0";
		buffer[1] = "x";
		for (uint256 i = 2 * length + 1; i > 1; --i) {
			buffer[i] = _HEX_SYMBOLS[value & 0xf];
			value >>= 4;
		}
		require(value == 0, "Strings: hex length insufficient");
		return string(buffer);
	}
}

// File contracts/openzeppelin/contracts/utils/introspection/ERC165.sol

// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
	/**
	 * @dev See {IERC165-supportsInterface}.
	 */
	function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
		return interfaceId == type(IERC165).interfaceId;
	}
}

// File contracts/openzeppelin/contracts/token/ERC721/ERC721.sol

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
	using Address for address;
	using Strings for uint256;

	// Token name
	string private _name;

	// Token symbol
	string private _symbol;

	// Mapping from token ID to owner address
	mapping(uint256 => address) private _owners;

	// Mapping owner address to token count
	mapping(address => uint256) private _balances;

	// Mapping from token ID to approved address
	mapping(uint256 => address) private _tokenApprovals;

	// Mapping from owner to operator approvals
	mapping(address => mapping(address => bool)) private _operatorApprovals;

	/**
	 * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
	 */
	constructor(string memory name_, string memory symbol_) {
		_name = name_;
		_symbol = symbol_;
	}

	/**
	 * @dev See {IERC165-supportsInterface}.
	 */
	function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
		return interfaceId == type(IERC721).interfaceId || interfaceId == type(IERC721Metadata).interfaceId || super.supportsInterface(interfaceId);
	}

	/**
	 * @dev See {IERC721-balanceOf}.
	 */
	function balanceOf(address owner) public view virtual override returns (uint256) {
		require(owner != address(0), "ERC721: balance query for the zero address");
		return _balances[owner];
	}

	/**
	 * @dev See {IERC721-ownerOf}.
	 */
	function ownerOf(uint256 tokenId) public view virtual override returns (address) {
		address owner = _owners[tokenId];
		require(owner != address(0), "ERC721: owner query for nonexistent token");
		return owner;
	}

	/**
	 * @dev See {IERC721Metadata-name}.
	 */
	function name() public view virtual override returns (string memory) {
		return _name;
	}

	/**
	 * @dev See {IERC721Metadata-symbol}.
	 */
	function symbol() public view virtual override returns (string memory) {
		return _symbol;
	}

	/**
	 * @dev See {IERC721Metadata-tokenURI}.
	 */
	function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
		require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

		string memory baseURI = _baseURI();
		return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
	}

	/**
	 * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
	 * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
	 * by default, can be overridden in child contracts.
	 */
	function _baseURI() internal view virtual returns (string memory) {
		return "";
	}

	/**
	 * @dev See {IERC721-approve}.
	 */
	function approve(address to, uint256 tokenId) public virtual override {
		address owner = ERC721.ownerOf(tokenId);
		require(to != owner, "ERC721: approval to current owner");

		require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()), "ERC721: approve caller is not owner nor approved for all");

		_approve(to, tokenId);
	}

	/**
	 * @dev See {IERC721-getApproved}.
	 */
	function getApproved(uint256 tokenId) public view virtual override returns (address) {
		require(_exists(tokenId), "ERC721: approved query for nonexistent token");

		return _tokenApprovals[tokenId];
	}

	/**
	 * @dev See {IERC721-setApprovalForAll}.
	 */
	function setApprovalForAll(address operator, bool approved) public virtual override {
		_setApprovalForAll(_msgSender(), operator, approved);
	}

	/**
	 * @dev See {IERC721-isApprovedForAll}.
	 */
	function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
		return _operatorApprovals[owner][operator];
	}

	/**
	 * @dev See {IERC721-transferFrom}.
	 */
	function transferFrom(
		address from,
		address to,
		uint256 tokenId
	) public virtual override {
		//solhint-disable-next-line max-line-length
		require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

		_transfer(from, to, tokenId);
	}

	/**
	 * @dev See {IERC721-safeTransferFrom}.
	 */
	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId
	) public virtual override {
		safeTransferFrom(from, to, tokenId, "");
	}

	/**
	 * @dev See {IERC721-safeTransferFrom}.
	 */
	function safeTransferFrom(
		address from,
		address to,
		uint256 tokenId,
		bytes memory data
	) public virtual override {
		require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
		_safeTransfer(from, to, tokenId, data);
	}

	/**
	 * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
	 * are aware of the ERC721 protocol to prevent tokens from being forever locked.
	 *
	 * `data` is additional data, it has no specified format and it is sent in call to `to`.
	 *
	 * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
	 * implement alternative mechanisms to perform token transfer, such as signature-based.
	 *
	 * Requirements:
	 *
	 * - `from` cannot be the zero address.
	 * - `to` cannot be the zero address.
	 * - `tokenId` token must exist and be owned by `from`.
	 * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
	 *
	 * Emits a {Transfer} event.
	 */
	function _safeTransfer(
		address from,
		address to,
		uint256 tokenId,
		bytes memory data
	) internal virtual {
		_transfer(from, to, tokenId);
		require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
	}

	/**
	 * @dev Returns whether `tokenId` exists.
	 *
	 * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
	 *
	 * Tokens start existing when they are minted (`_mint`),
	 * and stop existing when they are burned (`_burn`).
	 */
	function _exists(uint256 tokenId) internal view virtual returns (bool) {
		return _owners[tokenId] != address(0);
	}

	/**
	 * @dev Returns whether `spender` is allowed to manage `tokenId`.
	 *
	 * Requirements:
	 *
	 * - `tokenId` must exist.
	 */
	function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
		require(_exists(tokenId), "ERC721: operator query for nonexistent token");
		address owner = ERC721.ownerOf(tokenId);
		return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
	}

	/**
	 * @dev Safely mints `tokenId` and transfers it to `to`.
	 *
	 * Requirements:
	 *
	 * - `tokenId` must not exist.
	 * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
	 *
	 * Emits a {Transfer} event.
	 */
	function _safeMint(address to, uint256 tokenId) internal virtual {
		_safeMint(to, tokenId, "");
	}

	/**
	 * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
	 * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
	 */
	function _safeMint(
		address to,
		uint256 tokenId,
		bytes memory data
	) internal virtual {
		_mint(to, tokenId);
		require(_checkOnERC721Received(address(0), to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
	}

	/**
	 * @dev Mints `tokenId` and transfers it to `to`.
	 *
	 * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
	 *
	 * Requirements:
	 *
	 * - `tokenId` must not exist.
	 * - `to` cannot be the zero address.
	 *
	 * Emits a {Transfer} event.
	 */
	function _mint(address to, uint256 tokenId) internal virtual {
		require(to != address(0), "ERC721: mint to the zero address");
		require(!_exists(tokenId), "ERC721: token already minted");

		_beforeTokenTransfer(address(0), to, tokenId);

		_balances[to] += 1;
		_owners[tokenId] = to;

		emit Transfer(address(0), to, tokenId);

		_afterTokenTransfer(address(0), to, tokenId);
	}

	/**
	 * @dev Destroys `tokenId`.
	 * The approval is cleared when the token is burned.
	 *
	 * Requirements:
	 *
	 * - `tokenId` must exist.
	 *
	 * Emits a {Transfer} event.
	 */
	function _burn(uint256 tokenId) internal virtual {
		address owner = ERC721.ownerOf(tokenId);

		_beforeTokenTransfer(owner, address(0), tokenId);

		// Clear approvals
		_approve(address(0), tokenId);

		_balances[owner] -= 1;
		delete _owners[tokenId];

		emit Transfer(owner, address(0), tokenId);

		_afterTokenTransfer(owner, address(0), tokenId);
	}

	/**
	 * @dev Transfers `tokenId` from `from` to `to`.
	 *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
	 *
	 * Requirements:
	 *
	 * - `to` cannot be the zero address.
	 * - `tokenId` token must be owned by `from`.
	 *
	 * Emits a {Transfer} event.
	 */
	function _transfer(
		address from,
		address to,
		uint256 tokenId
	) internal virtual {
		require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
		require(to != address(0), "ERC721: transfer to the zero address");

		_beforeTokenTransfer(from, to, tokenId);

		// Clear approvals from the previous owner
		_approve(address(0), tokenId);

		_balances[from] -= 1;
		_balances[to] += 1;
		_owners[tokenId] = to;

		emit Transfer(from, to, tokenId);

		_afterTokenTransfer(from, to, tokenId);
	}

	/**
	 * @dev Approve `to` to operate on `tokenId`
	 *
	 * Emits an {Approval} event.
	 */
	function _approve(address to, uint256 tokenId) internal virtual {
		_tokenApprovals[tokenId] = to;
		emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
	}

	/**
	 * @dev Approve `operator` to operate on all of `owner` tokens
	 *
	 * Emits an {ApprovalForAll} event.
	 */
	function _setApprovalForAll(
		address owner,
		address operator,
		bool approved
	) internal virtual {
		require(owner != operator, "ERC721: approve to caller");
		_operatorApprovals[owner][operator] = approved;
		emit ApprovalForAll(owner, operator, approved);
	}

	/**
	 * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
	 * The call is not executed if the target address is not a contract.
	 *
	 * @param from address representing the previous owner of the given token ID
	 * @param to target address that will receive the tokens
	 * @param tokenId uint256 ID of the token to be transferred
	 * @param data bytes optional data to send along with the call
	 * @return bool whether the call correctly returned the expected magic value
	 */
	function _checkOnERC721Received(
		address from,
		address to,
		uint256 tokenId,
		bytes memory data
	) private returns (bool) {
		if (to.isContract()) {
			try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
				return retval == IERC721Receiver.onERC721Received.selector;
			} catch (bytes memory reason) {
				if (reason.length == 0) {
					revert("ERC721: transfer to non ERC721Receiver implementer");
				} else {
					assembly {
						revert(add(32, reason), mload(reason))
					}
				}
			}
		} else {
			return true;
		}
	}

	/**
	 * @dev Hook that is called before any token transfer. This includes minting
	 * and burning.
	 *
	 * Calling conditions:
	 *
	 * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
	 * transferred to `to`.
	 * - When `from` is zero, `tokenId` will be minted for `to`.
	 * - When `to` is zero, ``from``'s `tokenId` will be burned.
	 * - `from` and `to` are never both zero.
	 *
	 * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
	 */
	function _beforeTokenTransfer(
		address from,
		address to,
		uint256 tokenId
	) internal virtual {}

	/**
	 * @dev Hook that is called after any transfer of tokens. This includes
	 * minting and burning.
	 *
	 * Calling conditions:
	 *
	 * - when `from` and `to` are both non-zero.
	 * - `from` and `to` are never both zero.
	 *
	 * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
	 */
	function _afterTokenTransfer(
		address from,
		address to,
		uint256 tokenId
	) internal virtual {}
}

// File contracts/openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol

// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
	/**
	 * @dev Returns the total amount of tokens stored by the contract.
	 */
	function totalSupply() external view returns (uint256);

	/**
	 * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
	 * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
	 */
	function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);

	/**
	 * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
	 * Use along with {totalSupply} to enumerate all tokens.
	 */
	function tokenByIndex(uint256 index) external view returns (uint256);
}

// File contracts/openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol

// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)

pragma solidity ^0.8.0;

/**
 * @dev This implements an optional extension of {ERC721} defined in the EIP that adds
 * enumerability of all the token ids in the contract as well as all token ids owned by each
 * account.
 */
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
	// Mapping from owner to list of owned token IDs
	mapping(address => mapping(uint256 => uint256)) private _ownedTokens;

	// Mapping from token ID to index of the owner tokens list
	mapping(uint256 => uint256) private _ownedTokensIndex;

	// Array with all token ids, used for enumeration
	uint256[] private _allTokens;

	// Mapping from token id to position in the allTokens array
	mapping(uint256 => uint256) private _allTokensIndex;

	/**
	 * @dev See {IERC165-supportsInterface}.
	 */
	function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
		return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
	}

	/**
	 * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
	 */
	function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
		require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
		return _ownedTokens[owner][index];
	}

	/**
	 * @dev See {IERC721Enumerable-totalSupply}.
	 */
	function totalSupply() public view virtual override returns (uint256) {
		return _allTokens.length;
	}

	/**
	 * @dev See {IERC721Enumerable-tokenByIndex}.
	 */
	function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
		require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
		return _allTokens[index];
	}

	/**
	 * @dev Hook that is called before any token transfer. This includes minting
	 * and burning.
	 *
	 * Calling conditions:
	 *
	 * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
	 * transferred to `to`.
	 * - When `from` is zero, `tokenId` will be minted for `to`.
	 * - When `to` is zero, ``from``'s `tokenId` will be burned.
	 * - `from` cannot be the zero address.
	 * - `to` cannot be the zero address.
	 *
	 * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
	 */
	function _beforeTokenTransfer(
		address from,
		address to,
		uint256 tokenId
	) internal virtual override {
		super._beforeTokenTransfer(from, to, tokenId);

		if (from == address(0)) {
			_addTokenToAllTokensEnumeration(tokenId);
		} else if (from != to) {
			_removeTokenFromOwnerEnumeration(from, tokenId);
		}
		if (to == address(0)) {
			_removeTokenFromAllTokensEnumeration(tokenId);
		} else if (to != from) {
			_addTokenToOwnerEnumeration(to, tokenId);
		}
	}

	/**
	 * @dev Private function to add a token to this extension's ownership-tracking data structures.
	 * @param to address representing the new owner of the given token ID
	 * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
	 */
	function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
		uint256 length = ERC721.balanceOf(to);
		_ownedTokens[to][length] = tokenId;
		_ownedTokensIndex[tokenId] = length;
	}

	/**
	 * @dev Private function to add a token to this extension's token tracking data structures.
	 * @param tokenId uint256 ID of the token to be added to the tokens list
	 */
	function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
		_allTokensIndex[tokenId] = _allTokens.length;
		_allTokens.push(tokenId);
	}

	/**
	 * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
	 * while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
	 * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
	 * This has O(1) time complexity, but alters the order of the _ownedTokens array.
	 * @param from address representing the previous owner of the given token ID
	 * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
	 */
	function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
		// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
		// then delete the last slot (swap and pop).

		uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
		uint256 tokenIndex = _ownedTokensIndex[tokenId];

		// When the token to delete is the last token, the swap operation is unnecessary
		if (tokenIndex != lastTokenIndex) {
			uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];

			_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
			_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
		}

		// This also deletes the contents at the last position of the array
		delete _ownedTokensIndex[tokenId];
		delete _ownedTokens[from][lastTokenIndex];
	}

	/**
	 * @dev Private function to remove a token from this extension's token tracking data structures.
	 * This has O(1) time complexity, but alters the order of the _allTokens array.
	 * @param tokenId uint256 ID of the token to be removed from the tokens list
	 */
	function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
		// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
		// then delete the last slot (swap and pop).

		uint256 lastTokenIndex = _allTokens.length - 1;
		uint256 tokenIndex = _allTokensIndex[tokenId];

		// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
		// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
		// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
		uint256 lastTokenId = _allTokens[lastTokenIndex];

		_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
		_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index

		// This also deletes the contents at the last position of the array
		delete _allTokensIndex[tokenId];
		_allTokens.pop();
	}
}

// File contracts/openzeppelin/contracts/security/Pausable.sol

// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
	/**
	 * @dev Emitted when the pause is triggered by `account`.
	 */
	event Paused(address account);

	/**
	 * @dev Emitted when the pause is lifted by `account`.
	 */
	event Unpaused(address account);

	bool private _paused;

	/**
	 * @dev Initializes the contract in unpaused state.
	 */
	constructor() {
		_paused = false;
	}

	/**
	 * @dev Returns true if the contract is paused, and false otherwise.
	 */
	function paused() public view virtual returns (bool) {
		return _paused;
	}

	/**
	 * @dev Modifier to make a function callable only when the contract is not paused.
	 *
	 * Requirements:
	 *
	 * - The contract must not be paused.
	 */
	modifier whenNotPaused() {
		require(!paused(), "Pausable: paused");
		_;
	}

	/**
	 * @dev Modifier to make a function callable only when the contract is paused.
	 *
	 * Requirements:
	 *
	 * - The contract must be paused.
	 */
	modifier whenPaused() {
		require(paused(), "Pausable: not paused");
		_;
	}

	/**
	 * @dev Triggers stopped state.
	 *
	 * Requirements:
	 *
	 * - The contract must not be paused.
	 */
	function _pause() internal virtual whenNotPaused {
		_paused = true;
		emit Paused(_msgSender());
	}

	/**
	 * @dev Returns to normal state.
	 *
	 * Requirements:
	 *
	 * - The contract must be paused.
	 */
	function _unpause() internal virtual whenPaused {
		_paused = false;
		emit Unpaused(_msgSender());
	}
}

// File contracts/openzeppelin/contracts/access/Ownable.sol

// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
	address private _owner;

	event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

	/**
	 * @dev Initializes the contract setting the deployer as the initial owner.
	 */
	constructor() {
		_transferOwnership(_msgSender());
	}

	/**
	 * @dev Returns the address of the current owner.
	 */
	function owner() public view virtual returns (address) {
		return _owner;
	}

	/**
	 * @dev Throws if called by any account other than the owner.
	 */
	modifier onlyOwner() {
		require(owner() == _msgSender(), "Ownable: caller is not the owner");
		_;
	}

	/**
	 * @dev Leaves the contract without owner. It will not be possible to call
	 * `onlyOwner` functions anymore. Can only be called by the current owner.
	 *
	 * NOTE: Renouncing ownership will leave the contract without an owner,
	 * thereby removing any functionality that is only available to the owner.
	 */
	function renounceOwnership() public virtual onlyOwner {
		_transferOwnership(address(0));
	}

	/**
	 * @dev Transfers ownership of the contract to a new account (`newOwner`).
	 * Can only be called by the current owner.
	 */
	function transferOwnership(address newOwner) public virtual onlyOwner {
		require(newOwner != address(0), "Ownable: new owner is the zero address");
		_transferOwnership(newOwner);
	}

	/**
	 * @dev Transfers ownership of the contract to a new account (`newOwner`).
	 * Internal function without access restriction.
	 */
	function _transferOwnership(address newOwner) internal virtual {
		address oldOwner = _owner;
		_owner = newOwner;
		emit OwnershipTransferred(oldOwner, newOwner);
	}
}

// File contracts/openzeppelin/contracts/token/ERC721/extensions/ERC721Burnable.sol

// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Burnable.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 Burnable Token
 * @dev ERC721 Token that can be irreversibly burned (destroyed).
 */
abstract contract ERC721Burnable is Context, ERC721 {
	/**
	 * @dev Burns `tokenId`. See {ERC721-_burn}.
	 *
	 * Requirements:
	 *
	 * - The caller must own `tokenId` or be an approved operator.
	 */
	function burn(uint256 tokenId) public virtual {
		//solhint-disable-next-line max-line-length
		require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
		_burn(tokenId);
	}
}

// File contracts/openzeppelin/contracts/utils/Counters.sol

// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
	struct Counter {
		// This variable should never be directly accessed by users of the library: interactions must be restricted to
		// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
		// this feature: see https://github.com/ethereum/solidity/issues/4637
		uint256 _value; // default: 0
	}

	function current(Counter storage counter) internal view returns (uint256) {
		return counter._value;
	}

	function increment(Counter storage counter) internal {
		unchecked {
			counter._value += 1;
		}
	}

	function decrement(Counter storage counter) internal {
		uint256 value = counter._value;
		require(value > 0, "Counter: decrement overflow");
		unchecked {
			counter._value = value - 1;
		}
	}

	function reset(Counter storage counter) internal {
		counter._value = 0;
	}
}

// File contracts/NFT/NFT.sol

pragma solidity ^0.8.7;

contract NFT is ERC721, ERC721Enumerable, Pausable, Ownable, ERC721Burnable {
	using Counters for Counters.Counter;

	Counters.Counter private _tokenIdCounter;
	string private _baseTokenURI;
	uint256 public maxAmount;
	address public minterContract;
	address public devAddress;

	constructor(address _devAddress, uint256 _amount) ERC721("Bubbly and Friends", "BUBBLY") {
		setDevAddress(_devAddress);
		setMaxAmount(_amount);
	}

	modifier checkMaxAmount() {
		require(maxAmount > _tokenIdCounter.current(), "Maximum number of NFTs reached.");
		_;
	}

	modifier onlyDev() {
		require(_msgSender() == devAddress);
		_;
	}

	modifier onlyMinter() {
		require(_msgSender() == minterContract);
		_;
	}

	function pause() public onlyOwner {
		_pause();
	}

	function unpause() public onlyOwner {
		_unpause();
	}

	// !! Sale Contract Only mintable
	function saleMint(address to) external checkMaxAmount onlyMinter {
		_tokenIdCounter.increment();
		uint256 _tokenId = _tokenIdCounter.current();
		_mint(to, _tokenId);
	}

	function tokenURI(uint256 _tokenId) public view override returns (string memory) {
		require(_exists(_tokenId), "ERC721Metadata: URI query for nonexistent token");
		return string(abi.encodePacked(_baseURI(), Strings.toString(_tokenId)));
	}

	function setBaseURI(string memory _uri) public onlyDev {
		_baseTokenURI = _uri;
	}

	function setMinterContract(address saleContract) public onlyDev {
		minterContract = saleContract;
	}

	function setDevAddress(address _devAddress) public onlyOwner {
		devAddress = _devAddress;
	}

	function setMaxAmount(uint256 _amount) public onlyDev {
		maxAmount = _amount;
	}

	function _baseURI() internal view virtual override returns (string memory) {
		return _baseTokenURI;
	}

	function _beforeTokenTransfer(
		address from,
		address to,
		uint256 tokenId
	) internal override(ERC721, ERC721Enumerable) whenNotPaused {
		super._beforeTokenTransfer(from, to, tokenId);
	}

	function _afterTokenTransfer(
		address from,
		address to,
		uint256 tokenId
	) internal override(ERC721) {
		super._afterTokenTransfer(from, to, tokenId);
	}

	function supportsInterface(bytes4 interfaceId) public view override(ERC721, ERC721Enumerable) returns (bool) {
		return super.supportsInterface(interfaceId);
	}
}

{
  "compilationTarget": {
    "NFT.sol": "NFT"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}