// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.0;

import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: balance query for the zero address");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not owner nor approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: transfer caller is not owner nor approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address from,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }

        emit TransferSingle(operator, from, address(0), id, amount);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }

        emit TransferBatch(operator, from, address(0), ids, amounts);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits a {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/extensions/ERC1155URIStorage.sol)

pragma solidity ^0.8.0;

import "../../../utils/Strings.sol";
import "../ERC1155.sol";

/**
 * @dev ERC1155 token with storage based token URI management.
 * Inspired by the ERC721URIStorage extension
 *
 * _Available since v4.6._
 */
abstract contract ERC1155URIStorage is ERC1155 {
    using Strings for uint256;

    // Optional base URI
    string private _baseURI = "";

    // Optional mapping for token URIs
    mapping(uint256 => string) private _tokenURIs;

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the concatenation of the `_baseURI`
     * and the token-specific uri if the latter is set
     *
     * This enables the following behaviors:
     *
     * - if `_tokenURIs[tokenId]` is set, then the result is the concatenation
     *   of `_baseURI` and `_tokenURIs[tokenId]` (keep in mind that `_baseURI`
     *   is empty per default);
     *
     * - if `_tokenURIs[tokenId]` is NOT set then we fallback to `super.uri()`
     *   which in most cases will contain `ERC1155._uri`;
     *
     * - if `_tokenURIs[tokenId]` is NOT set, and if the parents do not have a
     *   uri value set, then the result is empty.
     */
    function uri(uint256 tokenId) public view virtual override returns (string memory) {
        string memory tokenURI = _tokenURIs[tokenId];

        // If token URI is set, concatenate base URI and tokenURI (via abi.encodePacked).
        return bytes(tokenURI).length > 0 ? string(abi.encodePacked(_baseURI, tokenURI)) : super.uri(tokenId);
    }

    /**
     * @dev Sets `tokenURI` as the tokenURI of `tokenId`.
     */
    function _setURI(uint256 tokenId, string memory tokenURI) internal virtual {
        _tokenURIs[tokenId] = tokenURI;
        emit URI(uri(tokenId), tokenId);
    }

    /**
     * @dev Sets `baseURI` as the `_baseURI` for all tokens
     */
    function _setBaseURI(string memory baseURI) internal virtual {
        _baseURI = baseURI;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.0;

import "../IERC1155.sol";

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

/**
 * @dev Interface for the NFT Royalty Standard.
 *
 * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
 * support for royalty payments across all NFT marketplaces and ecosystem participants.
 *
 * _Available since v4.5._
 */
interface IERC2981 is IERC165 {
    /**
     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
     */
    function royaltyInfo(uint256 tokenId, uint256 salePrice)
        external
        view
        returns (address receiver, uint256 royaltyAmount);
}

// SPDX-License-Identifier: MIT 
pragma solidity ^0.8.7;

library LibPart { 
    bytes32 public constant TYPE_HASH = keccak256("Part(address account,uint96 value)");

    struct Part { 
        address payable account;
        uint96 value; 
    }

    function hash(Part memory part) internal pure returns (bytes32){ 
        return keccak256(abi.encode(TYPE_HASH, part.account,  part.value));
    }
}

// SPDX-License-Identifier: MIT  
pragma solidity ^0.8.7;

library LibRoyaltiesV2 {
    /*
    * bytes4(keccak256('getRoyalties(LibAsset.AssetType)')) == 0xcad96cca
    */
    bytes4 constant _INTERFACE_ID_ROYALTIES = 0xcad96cca;
}

// SPDX-License-Identifier: MIT

// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxddxxxxddxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxdol:;,''....'',;:lodxxxxxxxxxxxxxxxxxxxxxdlc;,''....'',;:codxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxdc;'.                .';ldxxxxxxxxxxxxxxdl;'.                ..;cdxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxdl;.                        .;ldxxxxxxxxxo;.                        .;ldxxxxxxxxxxxxxx
// xxxxxxxxxxxxxl,.                            .,lxxxxxxo;.                            .'ldxxxxxxxxxxxx
// xxxxxxxxxxxo;.                                .,lddo;.                                .;oxxxxxxxxxxx
// xxxxxxxxxxo'                                    ....                                    'lxxxxxxxxxx
// xxxxxxxxxl'                             .                   .                            .lxxxxxxxxx
// xxxxxxxxo,                             'c,.              .,c'                             'oxxxxxxxx
// xxxxxxxxc.                             .lxl,.          .,ldo.                             .:xxxxxxxx
// xxxxxxxd,                              .:xxxl,.      .,ldxxc.                              'oxxxxxxx
// xxxxxxxo'                               ,dxxxxl,.  .,ldxxxd;                               .lxxxxxxx
// xxxxxxxo.                               .oxxxxxxl::ldxxxxxo'                               .lxxxxxxx
// xxxxxxxd,                               .cxxxxxxxxxxxxxxxxl.                               'oxxxxxxx
// xxxxxxxx:.           ..                  ;xxxxxxxxxxxxxxxx:                  ..            ;dxxxxxxx
// xxxxxxxxo'           ''                  'oxxxxxxxxxxxxxxd,                  .'           .lxxxxxxxx
// xxxxxxxxxc.          ;,                  .lxxxxxxxxxxxxxxo.                  ';.         .cxxxxxxxxx
// xxxxxxxxxxc.        .c,                  .:xxxxxxxxxxxxxxc.                  'c.        .cdxxxxxxxxx
// xxxxxxxxxxxl'       'l,       ..          ,dxxxxxxxxxxxxd;          ..       'l,       'lxxxxxxxxxxx
// xxxxxxxxxxxxd:.     ;o,       .'          .oxxxxxxxxxxxxo'          ..       'o:.    .:dxxxxxxxxxxxx
// xxxxxxxxxxxxxxd:.  .cd,       .;.         .cxxxxxxxxxxxxl.         .,'       'ol.  .:oxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxo:.,od,       .:.          ;xxxxxxxxxxxx:          .:'       'oo,.:oxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxdodd,       .l,          'dxxxxxxxxxxd,          'l'       'oxodxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxd;       .l:.         .lxxxxxxxxxxo.          :o'       ,dxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxd:.     .ol.         .:xxxxxxxxxxc.         .co'     .:oxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxd:.   .oo'          ;dxxxxxxxxd;          .oo'   .:oxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxo:. .od;          'oxxxxxxxxo'          ,do' .:oxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxd::oxc.         .cxxxxxxxxl.         .:xd::oxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxl.          ;xxxxxxxx:.         .lxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxd;          'dxxxxxxd,          ,dxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxd:.        .lxxxxxxo.        .:oxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxd:.      .cxxxxxxc.      .:oxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxo:.     ;dxxxxd;     .:oxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxd:.   'oxxxxo'   .:oxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxo:. .cxxxxl. .:oxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxo:'cxxxxc,:oxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
// xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxddxxxxddxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
//
// MEGAMI https://www.megami.io/

pragma solidity ^0.8.19;

import "@openzeppelin/contracts/interfaces/IERC2981.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/token/ERC1155/extensions/ERC1155URIStorage.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./rarible/royalties/contracts/LibPart.sol";
import "./rarible/royalties/contracts/LibRoyaltiesV2.sol";
import "./rarible/royalties/contracts/RoyaltiesV2.sol";

contract MEGAMIMusic is ERC1155URIStorage, Ownable, RoyaltiesV2 {

    /**
     * @dev The name of the token
     */
    string private _name = "MEGAMI-MUSIC";
    
    /**
     * @dev The symbol of the token
     */
    string private _symbol = "MEGAMI-MUSIC";

    /**
     * @dev The map managing the total supply for each token
     */
    mapping(uint256 => uint256) private _totalSupply;

    /**
     * @dev The struct holding the royalty info of a token
     */
    struct TokenRoyaltyInfo {
        address payable recipientAddress;
        uint96 percentageBasisPoint;
    }

    /**
     * @dev 100% in bases point
     */
    uint256 private constant HUNDRED_PERCENT_IN_BASIS_POINTS = 10000;

    /**
     * @dev Default royalty info used by all of the tokens
     */
    TokenRoyaltyInfo private defaultRoyaltyInfo;

    /**
     * @dev Map to manage a custom royalty info per token id.
     */
    mapping(uint256 => TokenRoyaltyInfo) private customRoyaltyInfo;

    /**
     * @dev Address of the fund manager contract
     */
    address private fundManager;

    /**
     * @dev Constractor of MEGAMI contract. Setting the fund manager and royalty recipient.
     * @param fundManagerContractAddress Address of the contract managing funds.
     */
    constructor(address fundManagerContractAddress) 
        ERC1155("") 
    {
        fundManager = fundManagerContractAddress;
        defaultRoyaltyInfo.recipientAddress = payable(fundManagerContractAddress);
        defaultRoyaltyInfo.percentageBasisPoint = 1000; // 10%
    }

    /**
     * @dev For receiving fund in case someone try to send it.
     */
    receive() external payable {}

    /**
     * @dev Set the address of the fund manager contract.
     * @param contractAddr Address of the contract managing funds.
     */
    function setFundManagerContract(address contractAddr)
        external
        onlyOwner
    {
        require(contractAddr != address(0), "invalid address");
        fundManager = contractAddr;
    } 

    /**
     * @dev Return the address of the fund manager contarct.
     */
    function getFundManagerContract() external view returns (address) {
        return fundManager;
    }    

    /**
     * @dev Total amount of tokens in with a given id.
     */
    function totalSupply(uint256 id) public view virtual returns (uint256) {
        return _totalSupply[id];
    }

    /**
     * @dev Indicates whether any token exist with a given id, or not.
     */
    function exists(uint256 id) public view virtual returns (bool) {
        return totalSupply(id) > 0;
    }
    
    /**
     * @dev See {ERC1155-_beforeTokenTransfer}.
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual override {
        super._beforeTokenTransfer(operator, from, to, ids, amounts, data);

        if (from == address(0)) {
            for (uint256 i = 0; i < ids.length; ++i) {
                _totalSupply[ids[i]] += amounts[i];
            }
        }

        if (to == address(0)) {
            for (uint256 i = 0; i < ids.length; ++i) {
                uint256 id = ids[i];
                uint256 amount = amounts[i];
                uint256 supply = _totalSupply[id];
                require(supply >= amount, "ERC1155: burn amount exceeds totalSupply");
                unchecked {
                    _totalSupply[id] = supply - amount;
                }
            }
        }
    }

    /**
     * @dev Set the base URI used by the all of the tokens
     */
    function setBaseURI(string memory newBaseURI) 
        external 
        onlyOwner 
    {
        _setBaseURI(newBaseURI);
    }

    /**
     * @dev Set the URI for a specific token 
     */
    function setTokenURI(uint256 tokenId, string memory newTokenURI) 
        public 
        onlyOwner 
    {
        _setURI(tokenId, newTokenURI);
    }

    /**
     * @dev create a new token
     * @param tokenId The tokenId of the token being created
     * @param _tokenURI The tokenURI of the token being created
     */
    function create(uint256 tokenId, string memory _tokenURI)
        external
        onlyOwner
    {
        require(!exists(tokenId), "token already exist");

        _mint(msg.sender, tokenId, 1, "");
        setTokenURI(tokenId, _tokenURI);
    }

    /**
     * @dev mint the specified token
     * @param to The address minted token is transferred to 
     * @param tokenId The tokenId of the token being minted
     * @param amount The amount of the token being minted
     */
    function mint(address to, uint256 tokenId, uint256 amount, bytes memory data)
        public
        onlyOwner
    {
        _mint(to, tokenId, amount, data);
    }

    /**
     * @dev mint the specified tokens in batch
     * @param to The address minted tokens are transferred to
     * @param tokenIds The array of the tokenIds being minted
     * @param amounts The array of tokens' amounts being minted
     */
    function mintBatch(address to, uint256[] memory tokenIds, uint256[] memory amounts, bytes memory data)
        public
        onlyOwner
    {
        _mintBatch(to, tokenIds, amounts, data);
    }

    /**
     * @dev mint a token and send it to recipients
     * @param tokenId the tokenId of the token being airdropped
     * @param amount the amount of the token being airdropped
     * @param recipients the list of addresses receiving the airdropped token
     */
    function airdrop(uint256 tokenId, uint256 amount, address[] memory recipients)
        external
        onlyOwner
    {
        uint256 recipientsLength = recipients.length;
        require(recipientsLength > 0, "no recipients");
        require(exists(tokenId), "token doesn't exist");
        require(amount > 0, "amount should be more than 0");

        for(uint256 i = 0; i < recipientsLength;) {
            mint(recipients[i], tokenId, amount, "");

            unchecked { ++i; }
        }
    }

    /**
     * @dev Burn the specified token
     * @param holder Holder's address of the token being burned
     * @param tokenId The tokenId of the token being burned
     * @param amount The mount of the token being burned
     */
	function burn(address holder, uint256 tokenId, uint256 amount) 
        public 
        onlyOwner 
    {
		_burn(holder, tokenId, amount);
	}

    /**
     * @dev Burn the specified tokens
     * @param holder Holder's address of the token being burned
     * @param tokenIds The tokenId of the tokens being burned
     * @param amounts The mount of the tokens being burned
     */
	function burnBatch(address holder, uint256[] memory tokenIds, uint256[] memory amounts) 
        public 
        onlyOwner 
    {
		_burnBatch(holder, tokenIds, amounts);
    }

    /**
     * @dev Set the royalty recipient and percentage for all of ids.
     * @param newDefaultRoyaltiesRecipientAddress The address of the new royalty receipient.
     * @param newDefaultPercentageBasisPoints The new percentagy basis points of the loyalty.
     */
    function setDefaultRoyaltyInfo(address payable newDefaultRoyaltiesRecipientAddress, uint96 newDefaultPercentageBasisPoints) 
        external 
        onlyOwner 
    {
        require(newDefaultRoyaltiesRecipientAddress != address(0), "invalid address");

        defaultRoyaltyInfo.recipientAddress = newDefaultRoyaltiesRecipientAddress;
        defaultRoyaltyInfo.percentageBasisPoint = newDefaultPercentageBasisPoints;
    }

    /**
     * @dev Set the royalty recipient and percentage for a specific id.
     * @param newCustomRoyaltiesRecipientAddress The address of the new royalty recipient. The custom setting can be reset by specifying zero address.
     * @param newCustomPercentageBasisPoints The new percentagy basis points of the loyalty.
     */
    function setCustomRoyaltyInfo(uint256 tokenId, address payable newCustomRoyaltiesRecipientAddress, uint96 newCustomPercentageBasisPoints) 
        external 
        onlyOwner 
    {
        customRoyaltyInfo[tokenId].recipientAddress = newCustomRoyaltiesRecipientAddress;
        customRoyaltyInfo[tokenId].percentageBasisPoint = newCustomPercentageBasisPoints;
    }

    /**
     * @dev Return royality information for Rarible.
     */
    function getRaribleV2Royalties(uint256 tokenId) 
        external 
        view 
        override 
        returns (LibPart.Part[] memory) 
    {
        address payable recipient = defaultRoyaltyInfo.recipientAddress;
        uint96 basisPoint = defaultRoyaltyInfo.percentageBasisPoint;

        if(customRoyaltyInfo[tokenId].recipientAddress != address(0)) {
            recipient = customRoyaltyInfo[tokenId].recipientAddress;
            basisPoint = customRoyaltyInfo[tokenId].percentageBasisPoint;
        }

        LibPart.Part[] memory _royalties = new LibPart.Part[](1);
        _royalties[0].value = basisPoint;
        _royalties[0].account = recipient;
        return _royalties;
    }

    /**
     * @dev Return royality information in EIP-2981 standard.
     * @param _salePrice The sale price of the token that royality is being calculated.
     */
    function royaltyInfo(uint256 tokenId, uint256 _salePrice) 
        external 
        view 
        returns (address receiver, uint256 royaltyAmount) 
    {
        address payable recipient = defaultRoyaltyInfo.recipientAddress;
        uint96 basisPoint = defaultRoyaltyInfo.percentageBasisPoint;

        if(customRoyaltyInfo[tokenId].recipientAddress != address(0)) {
            recipient = customRoyaltyInfo[tokenId].recipientAddress;
            basisPoint = customRoyaltyInfo[tokenId].percentageBasisPoint;
        }

        return (recipient, (_salePrice * basisPoint) / HUNDRED_PERCENT_IN_BASIS_POINTS);
    }

    /**
     * @dev Allow owner to send funds directly to recipient. This is for emergency purpose and use moveFundToManager for regular withdraw.
     * @param recipient The address of the recipinet.
     */
    function emergencyWithdraw(address recipient) 
        external 
        onlyOwner 
    {
        require(recipient != address(0), "recipient shouldn't be 0");

        (bool sent, ) = recipient.call{value: address(this).balance}("");
        require(sent, "failed to withdraw");
    }

    /**
     * @dev Move all of funds to the fund manager contract.
     */
    function moveFundToManager()
        external 
        onlyOwner 
    {
        require(fundManager != address(0), "fundManager shouldn't be 0");

        (bool sent, ) = fundManager.call{value: address(this).balance}("");
        require(sent, "failed to move fund to FundManager contract");
    }

    /**
     * @dev ERC20s should not be sent to this contract, but if someone does, it's nice to be able to recover them.
     * @param token IERC20 the token address
     * @param amount uint256 the amount to send
     */
    function forwardERC20s(IERC20 token, uint256 amount) 
        public 
        onlyOwner 
    {
        token.transfer(msg.sender, amount);
    }    

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) 
        public 
        view 
        virtual 
        override(ERC1155) 
        returns (bool) 
    {
        if (interfaceId == LibRoyaltiesV2._INTERFACE_ID_ROYALTIES) {
            return true;
        }
        if (interfaceId == type(IERC2981).interfaceId) {
            return true;
        }
        return super.supportsInterface(interfaceId);
    }

  /**
   * @dev Return the name of the token
   */
  function name() public view returns (string memory) {
    return _name;
  }

  /**
   * @dev Return the symbol of the token
   */
  function symbol() public view returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Update the name and symbol of the token
   */
  function setNameAndSymbol(string calldata _newName, string calldata _newSymbol)
    external 
    onlyOwner 
  {
    _name = _newName;
    _symbol = _newSymbol;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import "./LibPart.sol";

interface RoyaltiesV2 {
    event RoyaltiesSet(uint256 tokenId, LibPart.Part[] royalties);
    
    function getRaribleV2Royalties(uint256 id) external view returns (LibPart.Part[] memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

{
  "compilationTarget": {
    "contracts/MEGAMIMusic.sol": "MEGAMIMusic"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}