// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/Strings.sol"; 
// import "@openzeppelin/contracts/token/common/ERC2981.sol";
import "erc721a/contracts/extensions/ERC721AQueryable.sol";

interface IERC20 {
  function balanceOf(address account) external view returns (uint256);
  function transfer(address _to, uint256 _amount) external returns (bool);
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
}

contract ApetimismLaunchpadNFT is ERC721AQueryable, Ownable, ReentrancyGuard /*, ERC2981*/ {
  event Received(address, uint);
  event RoundChanged(uint8);
  event TotalMintedChanged(uint256);

  //////////////
  // Constants
  //////////////

  string private ERR_INVALID_SIGNATURE = "Invalid sig";
  string private ERR_DUP_NONCE = "Dup nonce";
  string private ERR_UNMATCHED_ETHER = "Unmatched ether";
  string private ERR_HIT_MAXIMUM = "Hit maximum";
  string private ERR_INVALID_AMOUNT = "Invalid amount";
  string private ERR_RUN_OUT = "Run out";

  uint256 public constant MAX_SUPPLY = 4444;
  uint256 public constant START_TOKEN_ID = 1;
  string private constant TOKEN_NAME = "Arbiboy";
  string private constant TOKEN_SYMBOL = "ARBY";

  //////////////
  // Internal
  //////////////

  mapping(address => uint256) private _addressTokenMinted;
  mapping(address => mapping(uint8 => mapping(int16 => uint256))) private _addressTokenMintedInRoundByRole;
  mapping(address => mapping(int16 => uint256)) private _addressTokenMintedInRole;

  mapping(uint256 => uint8) private _nonces;

  uint16 private allowedRolesInRoundSetId = 0;
  uint16 private roundAllocationsSetId = 0;
  uint16 private roleAllocationsSetId = 0;

  /////////////////////
  // Public Variables
  /////////////////////

  address public signerAddress = 0x5490d2788Bf473b2154D258Bb0ED8Bf62a738C99;

  uint8 public currentRound = 0;
  bool public metadataFrozen = false;
  uint16 public maxMintPerTx = 4444;
  uint16 public maxMintPerAddress = 4444;

  string public baseURIExtended;
  bool public metdataHasExtension = true;

  mapping(int16 => uint256) mintPriceByRole;

  struct Role {
    uint8 round_id;
    int16 role_id;
    uint256 max_mint;
    uint256 mint_price;
    bool exists;
  }
  mapping(uint16 => mapping(uint8 => mapping(int16 => Role))) public allowedRolesInRound;
  mapping(uint16 => mapping(uint8 => uint16)) public allowedRolesInRoundCount;
  mapping(uint16 => mapping(uint8 => int16[])) public allowedRolesInRoundArr;
  uint8[] public availableAllowedRounds;
  uint8[] public availableRounds;
  mapping(uint16 => mapping(uint8 => uint256)) public roundAllocations;
  mapping(uint16 => mapping(int16 => uint256)) public roleAllocations;
  int16[] public availableRoles;
  mapping(uint8 => uint256) public totalMintedInRound;

  uint256 public totalRevenueShared = 0;

  address public currencyAddress;

  ////////////////
  // Parameters
  ////////////////

  struct RoleInRoundParams {
    uint8 round;
    int16 role;
    uint256 maxMint;
    uint256 mintPrice;
  }
  struct RoundAllocationParams {
    uint8 round;
    uint256 allocation;
  }
  struct RoleAllocationParams {
    int16 role;
    uint256 allocation;
  }

  ////////////////
  // Actual Code
  ////////////////

  constructor() ERC721A(TOKEN_NAME, TOKEN_SYMBOL) {
  }

  function _startTokenId() internal view virtual override returns (uint256) {
    return START_TOKEN_ID;
  }

  //////////////////////
  // Setters for Owner
  //////////////////////

  function setCurrentRound(uint8 round_) public onlyOwner {
    currentRound = round_;
    emit RoundChanged(round_);
  }

  function setMaxMintPerTx(uint16 count) public onlyOwner {
    maxMintPerTx = count;
  }

  function setMaxMintPerAddress(uint16 count) public onlyOwner {
    maxMintPerAddress = count;
  }

  function setBaseURI(string memory baseURI) public onlyOwner {
    require(!metadataFrozen, "Metadata frozen");
    baseURIExtended = baseURI;
  }

  function setMetadataHasExtension(bool hasExtension) public onlyOwner {
    metdataHasExtension = hasExtension;
  }

  function setCurrencyAddress(address addr) public onlyOwner {
    currencyAddress = addr;
  }

  function addAllowedRolesInRound(RoleInRoundParams[] memory params, bool replace) public onlyOwner {
    if (replace) {
      allowedRolesInRoundSetId++;
      delete availableAllowedRounds;
    }

    for (uint i = 0; i < params.length; i++) {
      addAllowedRoleInRound(
        params[i].round,
        params[i].role,
        params[i].maxMint,
        params[i].mintPrice,
        false
      );
    }
  }

  function addAllowedRoleInRound(uint8 round, int16 role, uint256 maxMint, uint256 mintPrice, bool replace) public onlyOwner {
    if (replace) {
      allowedRolesInRoundSetId++;
      delete availableAllowedRounds;
    }

    bool role_already_existed = allowedRolesInRound[allowedRolesInRoundSetId][round][role].exists;
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].round_id = round;
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].role_id = role;
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].max_mint = maxMint;
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].mint_price = mintPrice;
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].exists = true;
    if (role_already_existed) // Role already existed
      return;
    allowedRolesInRoundCount[allowedRolesInRoundSetId][round]++;

    allowedRolesInRoundArr[allowedRolesInRoundSetId][round].push(role);

    bool found = false;
    for (uint8 i = 0; i < availableAllowedRounds.length; i++)
      if (availableAllowedRounds[i] == round)
        found = true;

    if (!found)
      availableAllowedRounds.push(round);
  }

  function removeAllowedRoleInRound(uint8 round, int16 role) public onlyOwner {
    require(allowedRolesInRound[allowedRolesInRoundSetId][round][role].exists, "Role not existed");
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].round_id = 0;
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].role_id = 0;
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].max_mint = 0;
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].mint_price = 0;
    allowedRolesInRound[allowedRolesInRoundSetId][round][role].exists = false;
    allowedRolesInRoundCount[allowedRolesInRoundSetId][round]--;

    // Remove available role
    for (uint8 i = 0; i < allowedRolesInRoundArr[allowedRolesInRoundSetId][round].length; i++) {
      if (allowedRolesInRoundArr[allowedRolesInRoundSetId][round][i] == role) {
        removeArrayAtInt16Index(allowedRolesInRoundArr[allowedRolesInRoundSetId][round], i);
        break;
      }
    }

    if (allowedRolesInRoundCount[allowedRolesInRoundSetId][round] == 0) {
      // Remove available round
      for (uint8 i = 0; i < availableRounds.length; i++) {
        if (availableRounds[i] == round) {
          removeArrayAtUint8Index(availableRounds, i);
          break;
        }
      }
    }
  }

  function addRoundsAllocation(RoundAllocationParams[] memory params, bool replace) public onlyOwner {
    if (replace) {
      roundAllocationsSetId++;
      delete availableRounds;
    }

    for (uint i = 0; i < params.length; i++)
      addRoundAllocation(params[i].round, params[i].allocation, false);
  }

  function addRoundAllocation(uint8 round, uint256 allocation, bool replace) public onlyOwner {
    if (replace) {
      roundAllocationsSetId++;
      delete availableRounds;
    }
    
    roundAllocations[roundAllocationsSetId][round] = allocation;

    bool found = false;
    for (uint8 i = 0; i < availableRounds.length; i++)
      if (availableRounds[i] == round)
        found = true;

    if (!found)
      availableRounds.push(round);
  }

  function addRolesAllocation(RoleAllocationParams[] memory params, bool replace) public onlyOwner {
    if (replace) {
      roleAllocationsSetId++;
      delete availableRoles;
    }

    for (uint i = 0; i < params.length; i++)
      addRoleAllocation(params[i].role, params[i].allocation, false);
  }

  function addRoleAllocation(int16 role, uint256 allocation, bool replace) public onlyOwner {
    if (replace) {
      roleAllocationsSetId++;
      delete availableRoles;
    }

    roleAllocations[roleAllocationsSetId][role] = allocation;

    bool found = false;
    for (uint16 i = 0; i < availableRoles.length; i++)
      if (availableRoles[i] == role)
        found = true;

    if (!found)
      availableRoles.push(role);
  }

  function addRolesRounds(
    RoleInRoundParams[] memory _rolesInRound,
    bool _replaceRoleInRound,
    RoundAllocationParams[] memory _roundAllocations,
    bool _replaceRoundAllocations,
    RoleAllocationParams[] memory _roleAllocations,
    bool _replaceRoleAllocations
  ) public onlyOwner {
    addAllowedRolesInRound(_rolesInRound, _replaceRoleInRound);
    addRoundsAllocation(_roundAllocations, _replaceRoundAllocations);
    addRolesAllocation(_roleAllocations, _replaceRoleAllocations);
  }

  function freezeMetadata() public onlyOwner {
    metadataFrozen = true;
  }

  ////////////
  // Minting
  ////////////

  function mint(uint256 quantity, int16 role, uint16 apetimismFee, address apetimismAddress, uint256 nonce, uint8 v, bytes32 r, bytes32 s) external payable nonReentrant {
    require(currentRound != 0, "Not started");

    uint256 combined_nonce = nonce;
    if (role >= 0)
      combined_nonce = (nonce << 16) + uint16(role);

    require(_nonces[combined_nonce] == 0, ERR_DUP_NONCE);
    require(_recoverAddress(abi.encodePacked(combined_nonce, apetimismFee, apetimismAddress), v, r, s) == signerAddress, ERR_INVALID_SIGNATURE);

    bool is_public_round = allowedRolesInRound[allowedRolesInRoundSetId][currentRound][0].exists;
    int16 selected_role = 0;
    if (role >= 0)
      selected_role = role;

    if (!allowedRolesInRound[allowedRolesInRoundSetId][currentRound][selected_role].exists) {
      if (!is_public_round)
        require(false, "Not eligible");
      selected_role = 0;
    }

    require(quantity > 0, ERR_INVALID_AMOUNT);
    require(mintableLeft() >= quantity, ERR_RUN_OUT);
    if (role >= 0)
      require(maxMintableForTxForRole(msg.sender, role) >= quantity, ERR_HIT_MAXIMUM);
    else
      require(maxMintableForTxForRole(msg.sender, 0) >= quantity, ERR_HIT_MAXIMUM);

    uint256 cost = quantity * allowedRolesInRound[allowedRolesInRoundSetId][currentRound][selected_role].mint_price;
    _nonces[combined_nonce] = 1;

    if (currencyAddress != address(0)) {
      // Pay by Token
      require(msg.value == 0, ERR_UNMATCHED_ETHER);
    } else {
      require(msg.value == cost, ERR_UNMATCHED_ETHER);
    }

    _safeMint(msg.sender, quantity);

    totalMintedInRound[currentRound] = totalMintedInRound[currentRound] + quantity;

    _addressTokenMinted[msg.sender] = _addressTokenMinted[msg.sender] + quantity;
    _addressTokenMintedInRoundByRole[msg.sender][currentRound][selected_role] = _addressTokenMintedInRoundByRole[msg.sender][currentRound][selected_role] + quantity;
    if (selected_role >= 0)
      _addressTokenMintedInRole[msg.sender][selected_role] = _addressTokenMintedInRole[msg.sender][selected_role] + quantity;

    uint256 to_apetimism = cost * apetimismFee / 10000;
    if (currencyAddress != address(0)) {
      IERC20 tokenContract = IERC20(currencyAddress);
      tokenContract.transferFrom(msg.sender, address(this), cost);
      tokenContract.transfer(apetimismAddress, to_apetimism);
    } else {
      _transferEth(payable(apetimismAddress), to_apetimism);
    }
    totalRevenueShared = totalRevenueShared + to_apetimism;
  }

  function adminMintTo(address to, uint256 quantity) public onlyOwner {
    require(quantity > 0, ERR_INVALID_AMOUNT);
    require(mintableLeft() >= quantity, ERR_RUN_OUT);

    _safeMint(to, quantity);
  }

  //////////////
  // Apetimism
  //////////////

  function setCurrentRoundFromSignature(uint256 nonce, uint8 round, uint8 v, bytes32 r, bytes32 s) public {
    require(_nonces[nonce] == 0, ERR_DUP_NONCE);
    require(_recoverAddress(abi.encodePacked(nonce, round), v, r, s) == signerAddress, ERR_INVALID_SIGNATURE);

    _nonces[nonce] = 1;
    currentRound = round;
    emit RoundChanged(round);
  }

  function setSignerAddressFromSignature(uint256 nonce, address addr, uint8 v, bytes32 r, bytes32 s) public {
    require(_nonces[nonce] == 0, ERR_DUP_NONCE);
    require(_recoverAddress(abi.encodePacked(nonce, addr), v, r, s) == signerAddress, ERR_INVALID_SIGNATURE);

    _nonces[nonce] = 1;
    signerAddress = addr;
  }

  ////////////////
  // Transfering
  ////////////////

  function transfersFrom(
    address from,
    address to,
    uint256[] calldata tokenIds
  ) public virtual {
    for (uint i = 0; i < tokenIds.length; i++)
      transferFrom(from, to, tokenIds[i]);
  }

  function safeTransfersFrom(
    address from,
    address to,
    uint256[] calldata tokenIds
  ) public virtual {
    for (uint i = 0; i < tokenIds.length; i++)
      safeTransferFrom(from, to, tokenIds[i]);
  }

  function safeTransfersFrom(
    address from,
    address to,
    uint256[] calldata tokenIds,
    bytes memory _data
  ) public virtual {
    for (uint i = 0; i < tokenIds.length; i++)
      safeTransferFrom(from, to, tokenIds[i], _data);
  }

  /////////////////
  // Public Views
  /////////////////

  // function getAllAvailableRounds() public view returns (uint8[] memory) {
  //   uint256 len = availableRounds.length;
  //   uint8[] memory ret = new uint8[](len);
  //   for (uint i = 0; i < len; i++)
  //     ret[i] = availableRounds[i];
  //   return ret;
  // }

  function getAllowedRolesInRoundArr(uint8 round) public view returns (int16[] memory) {
    uint256 len = allowedRolesInRoundArr[allowedRolesInRoundSetId][round].length;
    int16[] memory ret = new int16[](len);
    for (uint i = 0; i < len; i++)
      ret[i] = allowedRolesInRoundArr[allowedRolesInRoundSetId][round][i];
    return ret;
  }

  // function getAllAvailableRoles() public view returns (int16[] memory) {
  //   uint256 len = availableRoles.length;
  //   int16[] memory ret = new int16[](len);
  //   for (uint i = 0; i < len; i++)
  //     ret[i] = availableRoles[i];
  //   return ret;
  // }

  function getAllAllowedRolesInRounds() public view returns (RoleInRoundParams[] memory) {
    uint256 len = 0;
    for (uint i = 0; i < availableAllowedRounds.length; i++)
      len += allowedRolesInRoundCount[allowedRolesInRoundSetId][ availableAllowedRounds[i] ];

    RoleInRoundParams[] memory ret = new RoleInRoundParams[](len);
    uint256 index = 0;
    for (uint i = 0; i < availableAllowedRounds.length; i++) {
      uint8 round = availableAllowedRounds[i];
      for (uint j = 0; j < allowedRolesInRoundCount[allowedRolesInRoundSetId][ availableAllowedRounds[i] ]; j++) {
        int16 role = allowedRolesInRoundArr[allowedRolesInRoundSetId][round][j];
        ret[index].round = round;
        ret[index].role = role;
        ret[index].maxMint = allowedRolesInRound[allowedRolesInRoundSetId][round][role].max_mint;
        ret[index].mintPrice = allowedRolesInRound[allowedRolesInRoundSetId][round][role].mint_price;
        index++;
      }
    }
    return ret;
  }

  function getAllRoundAllocations() public view returns (RoundAllocationParams[] memory) {
    uint256 len = availableRounds.length;
    RoundAllocationParams[] memory ret = new RoundAllocationParams[](len);
    for (uint i = 0; i < len; i++) {
      ret[i].round = availableRounds[i];
      ret[i].allocation = roundAllocations[roundAllocationsSetId][availableRounds[i]];
    }
    return ret;
  }

  function getAllRoleAllocations() public view returns (RoleAllocationParams[] memory) {
    uint256 len = availableRoles.length;
    RoleAllocationParams[] memory ret = new RoleAllocationParams[](len);
    for (uint i = 0; i < len; i++) {
      ret[i].role = availableRoles[i];
      ret[i].allocation = roleAllocations[roleAllocationsSetId][availableRoles[i]];
    }
    return ret;
  }

  function mintPriceForCurrentRoundForRole(int16 role) public view returns (uint256) {
    return allowedRolesInRound[allowedRolesInRoundSetId][currentRound][role].mint_price;
  }

  function maxMintableForRole(address addr, int16 role) public view virtual returns (uint256) {
    uint256 minted = _addressTokenMinted[addr];
    uint256 max_mint = 0;

    // Not yet started
    if (currentRound == 0)
      return 0;
    // Total minted in this round reach the maximum allocated
    if (totalMintedInRound[currentRound] >= roundAllocations[roundAllocationsSetId][currentRound])
      return 0;
    if (_addressTokenMintedInRole[addr][role] >= roleAllocations[roleAllocationsSetId][role])
      return 0;

    if (allowedRolesInRound[allowedRolesInRoundSetId][currentRound][role].exists)
      max_mint = allowedRolesInRound[allowedRolesInRoundSetId][currentRound][role].max_mint;

    // Hit the maximum per wallet
    if (minted >= maxMintPerAddress)
      return 0;
    // Cannot mint more for this round
    if (_addressTokenMintedInRoundByRole[addr][currentRound][role] >= max_mint)
      return 0;
    // Prevent underflow
    if (totalMintedInRound[currentRound] >= roundAllocations[roundAllocationsSetId][currentRound])
      return 0;
    // Cannot mint more than allocated for role
    if (_addressTokenMintedInRole[addr][role] >= roleAllocations[roleAllocationsSetId][role])
      return 0;

    uint256 wallet_quota_left = maxMintPerAddress - minted;
    uint256 round_quota_left = max_mint - _addressTokenMintedInRoundByRole[addr][currentRound][role];
    uint256 round_allocation_quota_left = roundAllocations[roundAllocationsSetId][currentRound] - totalMintedInRound[currentRound];
    uint256 role_quota_left = roleAllocations[roleAllocationsSetId][role] - _addressTokenMintedInRole[addr][role];

    return min(mintableLeft(), min(min(min(wallet_quota_left, round_quota_left), round_allocation_quota_left), role_quota_left));
  }

  function maxMintableForTxForRole(address addr, int16 role) public view virtual returns (uint256) {
    uint256 mintable = maxMintableForRole(addr, role);

    if (mintable > maxMintPerTx)
      return maxMintPerTx;

    return mintable;
  }

  function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
    require(_exists(tokenId), 'nonexistent token');

    if (bytes(baseURIExtended).length == 0)
      return '';

    string memory extension = "";
    if (metdataHasExtension)
      extension = ".json";

    return string(abi.encodePacked(baseURIExtended, Strings.toString(tokenId), extension));
  }

  function totalMinted() public view returns (uint256) {
    return _totalMinted();
  }

  function mintableLeft() public view returns (uint256) {
    return MAX_SUPPLY - totalMinted();
  }

  ////////////
  // Helpers
  ////////////

  function removeArrayAtInt16Index(int16[] storage array, uint256 index) private {
    for (uint i = index; i < array.length - 1; i++)
      array[i] = array[i + 1];
    delete array[array.length - 1];
    array.pop();
  }

  function removeArrayAtUint8Index(uint8[] storage array, uint256 index) private {
    for (uint i = index; i < array.length - 1; i++)
      array[i] = array[i + 1];
    delete array[array.length - 1];
    array.pop();
  }

  function min(uint256 a, uint256 b) internal pure returns (uint256) {
    return a < b ? a : b;
  }

  function _recoverAddress(bytes memory data, uint8 v, bytes32 r, bytes32 s) private pure returns (address) {
    bytes32 msgHash = keccak256(data);
    bytes32 messageDigest = keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", msgHash));
    return ecrecover(messageDigest, v, r, s);
  }

  function _transferEth(address payable to, uint256 amount) internal {
    if (amount == 0)
      return;
    (bool sent,) = to.call{ value: amount }("");
    require(sent, "Ether not sent");
  }

  ////////////
  // ERC2981
  ////////////

  function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721A) returns (bool) {
    return super.supportsInterface(interfaceId) || ERC721A.supportsInterface(interfaceId);
  }

  // function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721A, ERC2981) returns (bool) {
  //   return super.supportsInterface(interfaceId) || ERC721A.supportsInterface(interfaceId) || ERC2981.supportsInterface(interfaceId);
  // }

  // function setDefaultRoyalty(address receiver, uint96 feeNumerator) public onlyOwner {
  //   _setDefaultRoyalty(receiver, feeNumerator);
  // }

  // function deleteDefaultRoyalty() public onlyOwner {
  //   _deleteDefaultRoyalty();
  // }

  // function setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) public onlyOwner {
  //   _setTokenRoyalty(tokenId, receiver, feeNumerator);
  // }

  // function resetTokenRoyalty(uint256 tokenId) public onlyOwner {
  //   _resetTokenRoyalty(tokenId);
  // }

  ///////////////
  // Withdrawal
  ///////////////

  function withdraw() public onlyOwner {
    uint256 balance = address(this).balance;
    _transferEth(payable(msg.sender), balance);
  }

  function withdrawToken(address tokenAddress) public onlyOwner {
    IERC20 tokenContract = IERC20(tokenAddress);
    tokenContract.transfer(msg.sender, tokenContract.balanceOf(address(this)));
  }

  /////////////
  // Fallback
  /////////////

  receive() external payable {
    emit Received(msg.sender, msg.value);
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import './IERC721A.sol';
import '@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol';
import '@openzeppelin/contracts/utils/Address.sol';
import '@openzeppelin/contracts/utils/Context.sol';
import '@openzeppelin/contracts/utils/Strings.sol';
import '@openzeppelin/contracts/utils/introspection/ERC165.sol';

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension. Built to optimize for lower gas during batch mints.
 *
 * Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
 *
 * Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 *
 * Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is Context, ERC165, IERC721A {
    using Address for address;
    using Strings for uint256;

    // The tokenId of the next token to be minted.
    uint256 internal _currentIndex;

    // The number of tokens burned.
    uint256 internal _burnCounter;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to ownership details
    // An empty struct value does not necessarily mean the token is unowned. See _ownershipOf implementation for details.
    mapping(uint256 => TokenOwnership) internal _ownerships;

    // Mapping owner address to address data
    mapping(address => AddressData) private _addressData;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _currentIndex = _startTokenId();
    }

    /**
     * To change the starting tokenId, please override this function.
     */
    function _startTokenId() internal view virtual returns (uint256) {
        return 0;
    }

    /**
     * @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.
     */
    function totalSupply() public view override returns (uint256) {
        // Counter underflow is impossible as _burnCounter cannot be incremented
        // more than _currentIndex - _startTokenId() times
        unchecked {
            return _currentIndex - _burnCounter - _startTokenId();
        }
    }

    /**
     * Returns the total amount of tokens minted in the contract.
     */
    function _totalMinted() internal view returns (uint256) {
        // Counter underflow is impossible as _currentIndex does not decrement,
        // and it is initialized to _startTokenId()
        unchecked {
            return _currentIndex - _startTokenId();
        }
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view override returns (uint256) {
        if (owner == address(0)) revert BalanceQueryForZeroAddress();
        return uint256(_addressData[owner].balance);
    }

    /**
     * Returns the number of tokens minted by `owner`.
     */
    function _numberMinted(address owner) internal view returns (uint256) {
        return uint256(_addressData[owner].numberMinted);
    }

    /**
     * Returns the number of tokens burned by or on behalf of `owner`.
     */
    function _numberBurned(address owner) internal view returns (uint256) {
        return uint256(_addressData[owner].numberBurned);
    }

    /**
     * Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
     */
    function _getAux(address owner) internal view returns (uint64) {
        return _addressData[owner].aux;
    }

    /**
     * Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
     * If there are multiple variables, please pack them into a uint64.
     */
    function _setAux(address owner, uint64 aux) internal {
        _addressData[owner].aux = aux;
    }

    /**
     * Gas spent here starts off proportional to the maximum mint batch size.
     * It gradually moves to O(1) as tokens get transferred around in the collection over time.
     */
    function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
        uint256 curr = tokenId;

        unchecked {
            if (_startTokenId() <= curr) if (curr < _currentIndex) {
                TokenOwnership memory ownership = _ownerships[curr];
                if (!ownership.burned) {
                    if (ownership.addr != address(0)) {
                        return ownership;
                    }
                    // Invariant:
                    // There will always be an ownership that has an address and is not burned
                    // before an ownership that does not have an address and is not burned.
                    // Hence, curr will not underflow.
                    while (true) {
                        curr--;
                        ownership = _ownerships[curr];
                        if (ownership.addr != address(0)) {
                            return ownership;
                        }
                    }
                }
            }
        }
        revert OwnerQueryForNonexistentToken();
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view override returns (address) {
        return _ownershipOf(tokenId).addr;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

        string memory baseURI = _baseURI();
        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return '';
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public override {
        address owner = ERC721A.ownerOf(tokenId);
        if (to == owner) revert ApprovalToCurrentOwner();

        if (_msgSender() != owner) if(!isApprovedForAll(owner, _msgSender())) {
            revert ApprovalCallerNotOwnerNorApproved();
        }

        _approve(to, tokenId, owner);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view override returns (address) {
        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        if (operator == _msgSender()) revert ApproveToCaller();

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, '');
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        _transfer(from, to, tokenId);
        if (to.isContract()) if(!_checkContractOnERC721Received(from, to, tokenId, _data)) {
            revert TransferToNonERC721ReceiverImplementer();
        }
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     */
    function _exists(uint256 tokenId) internal view returns (bool) {
        return _startTokenId() <= tokenId && tokenId < _currentIndex && !_ownerships[tokenId].burned;
    }

    /**
     * @dev Equivalent to `_safeMint(to, quantity, '')`.
     */
    function _safeMint(address to, uint256 quantity) internal {
        _safeMint(to, quantity, '');
    }

    /**
     * @dev Safely mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement
     *   {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal {
        uint256 startTokenId = _currentIndex;
        if (to == address(0)) revert MintToZeroAddress();
        if (quantity == 0) revert MintZeroQuantity();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
        // updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
        unchecked {
            _addressData[to].balance += uint64(quantity);
            _addressData[to].numberMinted += uint64(quantity);

            _ownerships[startTokenId].addr = to;
            _ownerships[startTokenId].startTimestamp = uint64(block.timestamp);

            uint256 updatedIndex = startTokenId;
            uint256 end = updatedIndex + quantity;

            if (to.isContract()) {
                do {
                    emit Transfer(address(0), to, updatedIndex);
                    if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
                        revert TransferToNonERC721ReceiverImplementer();
                    }
                } while (updatedIndex < end);
                // Reentrancy protection
                if (_currentIndex != startTokenId) revert();
            } else {
                do {
                    emit Transfer(address(0), to, updatedIndex++);
                } while (updatedIndex < end);
            }
            _currentIndex = updatedIndex;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 quantity) internal {
        uint256 startTokenId = _currentIndex;
        if (to == address(0)) revert MintToZeroAddress();
        if (quantity == 0) revert MintZeroQuantity();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
        // updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
        unchecked {
            _addressData[to].balance += uint64(quantity);
            _addressData[to].numberMinted += uint64(quantity);

            _ownerships[startTokenId].addr = to;
            _ownerships[startTokenId].startTimestamp = uint64(block.timestamp);

            uint256 updatedIndex = startTokenId;
            uint256 end = updatedIndex + quantity;

            do {
                emit Transfer(address(0), to, updatedIndex++);
            } while (updatedIndex < end);

            _currentIndex = updatedIndex;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) private {
        TokenOwnership memory prevOwnership = _ownershipOf(tokenId);

        if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();

        bool isApprovedOrOwner = (_msgSender() == from ||
            isApprovedForAll(from, _msgSender()) ||
            getApproved(tokenId) == _msgSender());

        if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
        if (to == address(0)) revert TransferToZeroAddress();

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId, from);

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
        unchecked {
            _addressData[from].balance -= 1;
            _addressData[to].balance += 1;

            TokenOwnership storage currSlot = _ownerships[tokenId];
            currSlot.addr = to;
            currSlot.startTimestamp = uint64(block.timestamp);

            // If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
            // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
            uint256 nextTokenId = tokenId + 1;
            TokenOwnership storage nextSlot = _ownerships[nextTokenId];
            if (nextSlot.addr == address(0)) {
                // This will suffice for checking _exists(nextTokenId),
                // as a burned slot cannot contain the zero address.
                if (nextTokenId != _currentIndex) {
                    nextSlot.addr = from;
                    nextSlot.startTimestamp = prevOwnership.startTimestamp;
                }
            }
        }

        emit Transfer(from, to, tokenId);
        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Equivalent to `_burn(tokenId, false)`.
     */
    function _burn(uint256 tokenId) internal virtual {
        _burn(tokenId, false);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
        TokenOwnership memory prevOwnership = _ownershipOf(tokenId);

        address from = prevOwnership.addr;

        if (approvalCheck) {
            bool isApprovedOrOwner = (_msgSender() == from ||
                isApprovedForAll(from, _msgSender()) ||
                getApproved(tokenId) == _msgSender());

            if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
        }

        _beforeTokenTransfers(from, address(0), tokenId, 1);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId, from);

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
        unchecked {
            AddressData storage addressData = _addressData[from];
            addressData.balance -= 1;
            addressData.numberBurned += 1;

            // Keep track of who burned the token, and the timestamp of burning.
            TokenOwnership storage currSlot = _ownerships[tokenId];
            currSlot.addr = from;
            currSlot.startTimestamp = uint64(block.timestamp);
            currSlot.burned = true;

            // If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
            // Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
            uint256 nextTokenId = tokenId + 1;
            TokenOwnership storage nextSlot = _ownerships[nextTokenId];
            if (nextSlot.addr == address(0)) {
                // This will suffice for checking _exists(nextTokenId),
                // as a burned slot cannot contain the zero address.
                if (nextTokenId != _currentIndex) {
                    nextSlot.addr = from;
                    nextSlot.startTimestamp = prevOwnership.startTimestamp;
                }
            }
        }

        emit Transfer(from, address(0), tokenId);
        _afterTokenTransfers(from, address(0), tokenId, 1);

        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
        unchecked {
            _burnCounter++;
        }
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(
        address to,
        uint256 tokenId,
        address owner
    ) private {
        _tokenApprovals[tokenId] = to;
        emit Approval(owner, to, tokenId);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkContractOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
            return retval == IERC721Receiver(to).onERC721Received.selector;
        } catch (bytes memory reason) {
            if (reason.length == 0) {
                revert TransferToNonERC721ReceiverImplementer();
            } else {
                assembly {
                    revert(add(32, reason), mload(reason))
                }
            }
        }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
     * And also called before burning one token.
     *
     * startTokenId - the first token id to be transferred
     * quantity - the amount to be transferred
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
     * minting.
     * And also called after one token has been burned.
     *
     * startTokenId - the first token id to be transferred
     * quantity - the amount to be transferred
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
     * transferred to `to`.
     * - When `from` is zero, `tokenId` has been minted for `to`.
     * - When `to` is zero, `tokenId` has been burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import './IERC721AQueryable.sol';
import '../ERC721A.sol';

/**
 * @title ERC721A Queryable
 * @dev ERC721A subclass with convenience query functions.
 */
abstract contract ERC721AQueryable is ERC721A, IERC721AQueryable {
    /**
     * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
     *
     * If the `tokenId` is out of bounds:
     *   - `addr` = `address(0)`
     *   - `startTimestamp` = `0`
     *   - `burned` = `false`
     *
     * If the `tokenId` is burned:
     *   - `addr` = `<Address of owner before token was burned>`
     *   - `startTimestamp` = `<Timestamp when token was burned>`
     *   - `burned = `true`
     *
     * Otherwise:
     *   - `addr` = `<Address of owner>`
     *   - `startTimestamp` = `<Timestamp of start of ownership>`
     *   - `burned = `false`
     */
    function explicitOwnershipOf(uint256 tokenId) public view override returns (TokenOwnership memory) {
        TokenOwnership memory ownership;
        if (tokenId < _startTokenId() || tokenId >= _currentIndex) {
            return ownership;
        }
        ownership = _ownerships[tokenId];
        if (ownership.burned) {
            return ownership;
        }
        return _ownershipOf(tokenId);
    }

    /**
     * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
     * See {ERC721AQueryable-explicitOwnershipOf}
     */
    function explicitOwnershipsOf(uint256[] memory tokenIds) external view override returns (TokenOwnership[] memory) {
        unchecked {
            uint256 tokenIdsLength = tokenIds.length;
            TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);
            for (uint256 i; i != tokenIdsLength; ++i) {
                ownerships[i] = explicitOwnershipOf(tokenIds[i]);
            }
            return ownerships;
        }
    }

    /**
     * @dev Returns an array of token IDs owned by `owner`,
     * in the range [`start`, `stop`)
     * (i.e. `start <= tokenId < stop`).
     *
     * This function allows for tokens to be queried if the collection
     * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
     *
     * Requirements:
     *
     * - `start` < `stop`
     */
    function tokensOfOwnerIn(
        address owner,
        uint256 start,
        uint256 stop
    ) external view override returns (uint256[] memory) {
        unchecked {
            if (start >= stop) revert InvalidQueryRange();
            uint256 tokenIdsIdx;
            uint256 stopLimit = _currentIndex;
            // Set `start = max(start, _startTokenId())`.
            if (start < _startTokenId()) {
                start = _startTokenId();
            }
            // Set `stop = min(stop, _currentIndex)`.
            if (stop > stopLimit) {
                stop = stopLimit;
            }
            uint256 tokenIdsMaxLength = balanceOf(owner);
            // Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,
            // to cater for cases where `balanceOf(owner)` is too big.
            if (start < stop) {
                uint256 rangeLength = stop - start;
                if (rangeLength < tokenIdsMaxLength) {
                    tokenIdsMaxLength = rangeLength;
                }
            } else {
                tokenIdsMaxLength = 0;
            }
            uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);
            if (tokenIdsMaxLength == 0) {
                return tokenIds;
            }
            // We need to call `explicitOwnershipOf(start)`,
            // because the slot at `start` may not be initialized.
            TokenOwnership memory ownership = explicitOwnershipOf(start);
            address currOwnershipAddr;
            // If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.
            // `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.
            if (!ownership.burned) {
                currOwnershipAddr = ownership.addr;
            }
            for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) {
                ownership = _ownerships[i];
                if (ownership.burned) {
                    continue;
                }
                if (ownership.addr != address(0)) {
                    currOwnershipAddr = ownership.addr;
                }
                if (currOwnershipAddr == owner) {
                    tokenIds[tokenIdsIdx++] = i;
                }
            }
            // Downsize the array to fit.
            assembly {
                mstore(tokenIds, tokenIdsIdx)
            }
            return tokenIds;
        }
    }

    /**
     * @dev Returns an array of token IDs owned by `owner`.
     *
     * This function scans the ownership mapping and is O(totalSupply) in complexity.
     * It is meant to be called off-chain.
     *
     * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
     * multiple smaller scans if the collection is large enough to cause
     * an out-of-gas error (10K pfp collections should be fine).
     */
    function tokensOfOwner(address owner) external view override returns (uint256[] memory) {
        unchecked {
            uint256 tokenIdsIdx;
            address currOwnershipAddr;
            uint256 tokenIdsLength = balanceOf(owner);
            uint256[] memory tokenIds = new uint256[](tokenIdsLength);
            TokenOwnership memory ownership;
            for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {
                ownership = _ownerships[i];
                if (ownership.burned) {
                    continue;
                }
                if (ownership.addr != address(0)) {
                    currOwnershipAddr = ownership.addr;
                }
                if (currOwnershipAddr == owner) {
                    tokenIds[tokenIdsIdx++] = i;
                }
            }
            return tokenIds;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import '@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol';

/**
 * @dev Interface of an ERC721A compliant contract.
 */
interface IERC721A is IERC721, IERC721Metadata {
    /**
     * The caller must own the token or be an approved operator.
     */
    error ApprovalCallerNotOwnerNorApproved();

    /**
     * The token does not exist.
     */
    error ApprovalQueryForNonexistentToken();

    /**
     * The caller cannot approve to their own address.
     */
    error ApproveToCaller();

    /**
     * The caller cannot approve to the current owner.
     */
    error ApprovalToCurrentOwner();

    /**
     * Cannot query the balance for the zero address.
     */
    error BalanceQueryForZeroAddress();

    /**
     * Cannot mint to the zero address.
     */
    error MintToZeroAddress();

    /**
     * The quantity of tokens minted must be more than zero.
     */
    error MintZeroQuantity();

    /**
     * The token does not exist.
     */
    error OwnerQueryForNonexistentToken();

    /**
     * The caller must own the token or be an approved operator.
     */
    error TransferCallerNotOwnerNorApproved();

    /**
     * The token must be owned by `from`.
     */
    error TransferFromIncorrectOwner();

    /**
     * Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
     */
    error TransferToNonERC721ReceiverImplementer();

    /**
     * Cannot transfer to the zero address.
     */
    error TransferToZeroAddress();

    /**
     * The token does not exist.
     */
    error URIQueryForNonexistentToken();

    // Compiler will pack this into a single 256bit word.
    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Keeps track of the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
    }

    // Compiler will pack this into a single 256bit word.
    struct AddressData {
        // Realistically, 2**64-1 is more than enough.
        uint64 balance;
        // Keeps track of mint count with minimal overhead for tokenomics.
        uint64 numberMinted;
        // Keeps track of burn count with minimal overhead for tokenomics.
        uint64 numberBurned;
        // For miscellaneous variable(s) pertaining to the address
        // (e.g. number of whitelist mint slots used).
        // If there are multiple variables, please pack them into a uint64.
        uint64 aux;
    }

    /**
     * @dev Returns the total amount of tokens stored by the contract.
     * 
     * Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens.
     */
    function totalSupply() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import '../IERC721A.sol';

/**
 * @dev Interface of an ERC721AQueryable compliant contract.
 */
interface IERC721AQueryable is IERC721A {
    /**
     * Invalid query range (`start` >= `stop`).
     */
    error InvalidQueryRange();

    /**
     * @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
     *
     * If the `tokenId` is out of bounds:
     *   - `addr` = `address(0)`
     *   - `startTimestamp` = `0`
     *   - `burned` = `false`
     *
     * If the `tokenId` is burned:
     *   - `addr` = `<Address of owner before token was burned>`
     *   - `startTimestamp` = `<Timestamp when token was burned>`
     *   - `burned = `true`
     *
     * Otherwise:
     *   - `addr` = `<Address of owner>`
     *   - `startTimestamp` = `<Timestamp of start of ownership>`
     *   - `burned = `false`
     */
    function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);

    /**
     * @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
     * See {ERC721AQueryable-explicitOwnershipOf}
     */
    function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);

    /**
     * @dev Returns an array of token IDs owned by `owner`,
     * in the range [`start`, `stop`)
     * (i.e. `start <= tokenId < stop`).
     *
     * This function allows for tokens to be queried if the collection
     * grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
     *
     * Requirements:
     *
     * - `start` < `stop`
     */
    function tokensOfOwnerIn(
        address owner,
        uint256 start,
        uint256 stop
    ) external view returns (uint256[] memory);

    /**
     * @dev Returns an array of token IDs owned by `owner`.
     *
     * This function scans the ownership mapping and is O(totalSupply) in complexity.
     * It is meant to be called off-chain.
     *
     * See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
     * multiple smaller scans if the collection is large enough to cause
     * an out-of-gas error (10K pfp collections should be fine).
     */
    function tokensOfOwner(address owner) external view returns (uint256[] memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

import "../IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

{
  "compilationTarget": {
    "ApetimismLaunchpadNFT.sol": "ApetimismLaunchpadNFT"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 160
  },
  "remappings": []
}