/**
 *Submitted for verification at Etherscan.io on 2019-06-20
*/

// File: node_modules\openzeppelin-solidity\contracts\ownership\Ownable.sol

pragma solidity ^0.5.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be aplied to your functions to restrict their use to
 * the owner.
 */
contract Ownable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        _owner = msg.sender;
        emit OwnershipTransferred(address(0), _owner);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(isOwner(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Returns true if the caller is the current owner.
     */
    function isOwner() public view returns (bool) {
        return msg.sender == _owner;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * > Note: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     */
    function _transferOwnership(address newOwner) internal {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: node_modules\openzeppelin-solidity\contracts\token\ERC20\IERC20.sol



/**
 * @dev Interface of the ERC20 standard as defined in the EIP. Does not include
 * the optional functions; to access them see `ERC20Detailed`.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a `Transfer` event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through `transferFrom`. This is
     * zero by default.
     *
     * This value changes when `approve` or `transferFrom` are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * > Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an `Approval` event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a `Transfer` event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to `approve`. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: node_modules\openzeppelin-solidity\contracts\math\SafeMath.sol



/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}

// File: node_modules\openzeppelin-solidity\contracts\utils\Address.sol



/**
 * @dev Collection of functions related to the address type,
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * This test is non-exhaustive, and there may be false-negatives: during the
     * execution of a contract's constructor, its address will be reported as
     * not containing a contract.
     *
     * > It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
}

// File: node_modules\openzeppelin-solidity\contracts\token\ERC20\SafeERC20.sol






/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves.

        // A Solidity high level call has three parts:
        //  1. The target address is checked to verify it contains contract code
        //  2. The call itself is made, and success asserted
        //  3. The return value is decoded, which in turn checks the size of the returned data.
        // solhint-disable-next-line max-line-length
        require(address(token).isContract(), "SafeERC20: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(data);
        require(success, "SafeERC20: low-level call failed");

        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: node_modules\openzeppelin-solidity\contracts\utils\ReentrancyGuard.sol



/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the `nonReentrant` modifier
 * available, which can be aplied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 */
contract ReentrancyGuard {
    /// @dev counter to allow mutex lock with only one SSTORE operation
    uint256 private _guardCounter;

    constructor () internal {
        // The counter starts at one to prevent changing it from zero to a non-zero
        // value, which is a more expensive operation.
        _guardCounter = 1;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call");
    }
}

// File: node_modules\openzeppelin-solidity\contracts\crowdsale\Crowdsale.sol







/**
 * @title Crowdsale
 * @dev Crowdsale is a base contract for managing a token crowdsale,
 * allowing investors to purchase tokens with ether. This contract implements
 * such functionality in its most fundamental form and can be extended to provide additional
 * functionality and/or custom behavior.
 * The external interface represents the basic interface for purchasing tokens, and conforms
 * the base architecture for crowdsales. It is *not* intended to be modified / overridden.
 * The internal interface conforms the extensible and modifiable surface of crowdsales. Override
 * the methods to add functionality. Consider using 'super' where appropriate to concatenate
 * behavior.
 */
contract Crowdsale is ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // The token being sold
    IERC20 private _token;

    // Address where funds are collected
    address payable private _wallet;

    // How many token units a buyer gets per wei.
    // The rate is the conversion between wei and the smallest and indivisible token unit.
    // So, if you are using a rate of 1 with a ERC20Detailed token with 3 decimals called TOK
    // 1 wei will give you 1 unit, or 0.001 TOK.
    uint256 private _rate;

    // Amount of wei raised
    uint256 private _weiRaised;

    /**
     * Event for token purchase logging
     * @param purchaser who paid for the tokens
     * @param beneficiary who got the tokens
     * @param value weis paid for purchase
     * @param amount amount of tokens purchased
     */
    event TokensPurchased(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);

    /**
     * @param rate Number of token units a buyer gets per wei
     * @dev The rate is the conversion between wei and the smallest and indivisible
     * token unit. So, if you are using a rate of 1 with a ERC20Detailed token
     * with 3 decimals called TOK, 1 wei will give you 1 unit, or 0.001 TOK.
     * @param wallet Address where collected funds will be forwarded to
     * @param token Address of the token being sold
     */
    constructor (uint256 rate, address payable wallet, IERC20 token) public {
        require(rate > 0, "Crowdsale: rate is 0");
        require(wallet != address(0), "Crowdsale: wallet is the zero address");
        require(address(token) != address(0), "Crowdsale: token is the zero address");

        _rate = rate;
        _wallet = wallet;
        _token = token;
    }

    /**
     * @dev fallback function ***DO NOT OVERRIDE***
     * Note that other contracts will transfer funds with a base gas stipend
     * of 2300, which is not enough to call buyTokens. Consider calling
     * buyTokens directly when purchasing tokens from a contract.
     */
    function () external payable {
        buyTokens(msg.sender);
    }

    /**
     * @return the token being sold.
     */
    function token() public view returns (IERC20) {
        return _token;
    }

    /**
     * @return the address where funds are collected.
     */
    function wallet() public view returns (address payable) {
        return _wallet;
    }

    /**
     * @return the number of token units a buyer gets per wei.
     */
    function rate() public view returns (uint256) {
        return _rate;
    }

    /**
     * @return the amount of wei raised.
     */
    function weiRaised() public view returns (uint256) {
        return _weiRaised;
    }

    /**
     * @dev low level token purchase ***DO NOT OVERRIDE***
     * This function has a non-reentrancy guard, so it shouldn't be called by
     * another `nonReentrant` function.
     * @param beneficiary Recipient of the token purchase
     */
    function buyTokens(address beneficiary) public nonReentrant payable {
        uint256 weiAmount = msg.value;
        _preValidatePurchase(beneficiary, weiAmount);

        // calculate token amount to be created
        uint256 tokens = _getTokenAmount(weiAmount);

        // update state
        _weiRaised = _weiRaised.add(weiAmount);

        _processPurchase(beneficiary, tokens);
        emit TokensPurchased(msg.sender, beneficiary, weiAmount, tokens);

        _updatePurchasingState(beneficiary, weiAmount);

        _forwardFunds();
        _postValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met.
     * Use `super` in contracts that inherit from Crowdsale to extend their validations.
     * Example from CappedCrowdsale.sol's _preValidatePurchase method:
     *     super._preValidatePurchase(beneficiary, weiAmount);
     *     require(weiRaised().add(weiAmount) <= cap);
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        require(beneficiary != address(0), "Crowdsale: beneficiary is the zero address");
        require(weiAmount != 0, "Crowdsale: weiAmount is 0");
    }

    /**
     * @dev Validation of an executed purchase. Observe state and use revert statements to undo rollback when valid
     * conditions are not met.
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _postValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends
     * its tokens.
     * @param beneficiary Address performing the token purchase
     * @param tokenAmount Number of tokens to be emitted
     */
    function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
        _token.safeTransfer(beneficiary, tokenAmount);
    }

    /**
     * @dev Executed when a purchase has been validated and is ready to be executed. Doesn't necessarily emit/send
     * tokens.
     * @param beneficiary Address receiving the tokens
     * @param tokenAmount Number of tokens to be purchased
     */
    function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
        _deliverTokens(beneficiary, tokenAmount);
    }

    /**
     * @dev Override for extensions that require an internal state to check for validity (current user contributions,
     * etc.)
     * @param beneficiary Address receiving the tokens
     * @param weiAmount Value in wei involved in the purchase
     */
    function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Override to extend the way in which ether is converted to tokens.
     * @param weiAmount Value in wei to be converted into tokens
     * @return Number of tokens that can be purchased with the specified _weiAmount
     */
    function _getTokenAmount(uint256 weiAmount) internal view returns (uint256) {
        return weiAmount.mul(_rate);
    }

    /**
     * @dev Determines how ETH is stored/forwarded on purchases.
     */
    function _forwardFunds() internal {
        _wallet.transfer(msg.value);
    }
}

// File: node_modules\openzeppelin-solidity\contracts\crowdsale\validation\CappedCrowdsale.sol

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}


/**
 * @title CappedCrowdsale
 * @dev Crowdsale with a limit for total contributions.
 */
contract CappedCrowdsale is Crowdsale {
    using SafeMath for uint256;

    uint256 private _cap;

    /**
     * @dev Constructor, takes maximum amount of wei accepted in the crowdsale.
     * @param cap Max amount of wei to be contributed
     */
    constructor (uint256 cap) public {
        require(cap > 0, "CappedCrowdsale: cap is 0");
        _cap = cap;
    }

    /**
     * @return the cap of the crowdsale.
     */
    function cap() public view returns (uint256) {
        return _cap;
    }

    /**
     * @dev Checks whether the cap has been reached.
     * @return Whether the cap was reached
     */
    function capReached() public view returns (bool) {
        return weiRaised() >= _cap;
    }

    /**
     * @dev Extend parent behavior requiring purchase to respect the funding cap.
     * @param beneficiary Token purchaser
     * @param weiAmount Amount of wei contributed
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        super._preValidatePurchase(beneficiary, weiAmount);
        require(weiRaised().add(weiAmount) <= _cap, "CappedCrowdsale: cap exceeded");
    }
}

// File: node_modules\openzeppelin-solidity\contracts\crowdsale\validation\TimedCrowdsale.sol





/**
 * @title TimedCrowdsale
 * @dev Crowdsale accepting contributions only within a time frame.
 */
contract TimedCrowdsale is Crowdsale {
    using SafeMath for uint256;

    uint256 private _openingTime;
    uint256 private _closingTime;

    /**
     * Event for crowdsale extending
     * @param newClosingTime new closing time
     * @param prevClosingTime old closing time
     */
    event TimedCrowdsaleExtended(uint256 prevClosingTime, uint256 newClosingTime);

    /**
     * @dev Reverts if not in crowdsale time range.
     */
    modifier onlyWhileOpen {
        require(isOpen(), "TimedCrowdsale: not open");
        _;
    }

    /**
     * @dev Constructor, takes crowdsale opening and closing times.
     * @param openingTime Crowdsale opening time
     * @param closingTime Crowdsale closing time
     */
    constructor (uint256 openingTime, uint256 closingTime) public {
        // solhint-disable-next-line not-rely-on-time
        require(openingTime >= block.timestamp, "TimedCrowdsale: opening time is before current time");
        // solhint-disable-next-line max-line-length
        require(closingTime > openingTime, "TimedCrowdsale: opening time is not before closing time");

        _openingTime = openingTime;
        _closingTime = closingTime;
    }

    /**
     * @return the crowdsale opening time.
     */
    function openingTime() public view returns (uint256) {
        return _openingTime;
    }

    /**
     * @return the crowdsale closing time.
     */
    function closingTime() public view returns (uint256) {
        return _closingTime;
    }

    /**
     * @return true if the crowdsale is open, false otherwise.
     */
    function isOpen() public view returns (bool) {
        // solhint-disable-next-line not-rely-on-time
        return block.timestamp >= _openingTime && block.timestamp <= _closingTime;
    }

    /**
     * @dev Checks whether the period in which the crowdsale is open has already elapsed.
     * @return Whether crowdsale period has elapsed
     */
    function hasClosed() public view returns (bool) {
        // solhint-disable-next-line not-rely-on-time
        return block.timestamp > _closingTime;
    }

    /**
     * @dev Extend parent behavior requiring to be within contributing period.
     * @param beneficiary Token purchaser
     * @param weiAmount Amount of wei contributed
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal onlyWhileOpen view {
        super._preValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Extend crowdsale.
     * @param newClosingTime Crowdsale closing time
     */
    function _extendTime(uint256 newClosingTime) internal {
        require(!hasClosed(), "TimedCrowdsale: already closed");
        // solhint-disable-next-line max-line-length
        require(newClosingTime > _closingTime, "TimedCrowdsale: new closing time is before current closing time");

        emit TimedCrowdsaleExtended(_closingTime, newClosingTime);
        _closingTime = newClosingTime;
    }
}

// File: node_modules\openzeppelin-solidity\contracts\access\Roles.sol



/**
 * @title Roles
 * @dev Library for managing addresses assigned to a Role.
 */
library Roles {
    struct Role {
        mapping (address => bool) bearer;
    }

    /**
     * @dev Give an account access to this role.
     */
    function add(Role storage role, address account) internal {
        require(!has(role, account), "Roles: account already has role");
        role.bearer[account] = true;
    }

    /**
     * @dev Remove an account's access to this role.
     */
    function remove(Role storage role, address account) internal {
        require(has(role, account), "Roles: account does not have role");
        role.bearer[account] = false;
    }

    /**
     * @dev Check if an account has this role.
     * @return bool
     */
    function has(Role storage role, address account) internal view returns (bool) {
        require(account != address(0), "Roles: account is the zero address");
        return role.bearer[account];
    }
}

contract AllowanceCrowdsale is Crowdsale {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    address private _tokenWallet;

    /**
     * @dev Constructor, takes token wallet address.
     * @param tokenWallet Address holding the tokens, which has approved allowance to the crowdsale.
     */
    constructor (address tokenWallet) public {
        require(tokenWallet != address(0), "AllowanceCrowdsale: token wallet is the zero address");
        _tokenWallet = tokenWallet;
    }

    /**
     * @return the address of the wallet that will hold the tokens.
     */
    function tokenWallet() public view returns (address) {
        return _tokenWallet;
    }

    /**
     * @dev Checks the amount of tokens left in the allowance.
     * @return Amount of tokens left in the allowance
     */
    function remainingTokens() public view returns (uint256) {
        return Math.min(token().balanceOf(_tokenWallet), token().allowance(_tokenWallet, address(this)));
    }

    /**
     * @dev Overrides parent behavior by transferring tokens from wallet.
     * @param beneficiary Token purchaser
     * @param tokenAmount Amount of tokens purchased
     */
    function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
        token().safeTransferFrom(_tokenWallet, beneficiary, tokenAmount);
    }
}
/**
 * @title __unstable__TokenVault
 * @dev Similar to an Escrow for tokens, this contract allows its primary account to spend its tokens as it sees fit.
 * This contract is an internal helper for PostDeliveryCrowdsale, and should not be used outside of this context.
 */
// solhint-disable-next-line contract-name-camelcase

// File: contracts\TonCrowdsale.sol

contract TonCrowdsale is
Crowdsale,
CappedCrowdsale,
TimedCrowdsale,
AllowanceCrowdsale,
Ownable
{
  // Track investor contributions
  uint256 public investorMinCap  =   10000000000000000;    // 0.01 ether
  uint256 public investorHardCap = 2000000000000000000;    // 2 ether
  uint256 constant public maxGasPrice =  1000000000000;    // 1000 Gwei
  uint256 _rate = 40000;
  uint256 _cap  = 621539400000000000000;
  mapping(address => uint256) public contributions;

  constructor(
    IERC20 _token,
    address  _walletAddress,
    address payable _fundAddress,
    uint256 _openingTime,
    uint256 _closingTime
  )
    Crowdsale(_rate, _fundAddress, _token)
    CappedCrowdsale(_cap)
    AllowanceCrowdsale(_walletAddress)
    TimedCrowdsale(_openingTime, _closingTime)
    public
  {

  }

  /**
  * @dev Returns the amount contributed so far by a sepecific user.
  * @param _beneficiary Address of contributor
  * @return User contribution so far
  */
  function getContribution(address _beneficiary)
    public view returns (uint256)
  {
    return contributions[_beneficiary];
  }

  /**
  * @dev Extend parent behavior requiring purchase to respect the beneficiary's funding cap.
  * @param beneficiary Token purchaser
  * @param weiAmount Amount of wei contributed
  */
  function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
      uint256 newContribution = contributions[beneficiary].add(weiAmount);
      require(tx.gasprice <= maxGasPrice,"TonCrowdsale: beneficiary's max Gas Price exceeded");
      require(newContribution <= investorHardCap, "TonCrowdsale: beneficiary's max cap exceeded");
      require(newContribution >= investorMinCap, "TonCrowdsale: beneficiary's min cap not reached");
      super._preValidatePurchase(beneficiary, weiAmount);
      // solhint-disable-next-line max-line-length
  }

  /**
  * @dev Extend parent behavior to update beneficiary contributions.
  * @param beneficiary Token purchaser
  * @param weiAmount Amount of wei contributed
  */
  function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal {
      super._updatePurchasingState(beneficiary, weiAmount);
      contributions[beneficiary] = contributions[beneficiary].add(weiAmount);
  }

}

{
  "compilationTarget": {
    "TonCrowdsale.sol": "TonCrowdsale"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}