pragma solidity ^0.5.16;

/**
  * @title Artem ERC-20 Contract
  * @notice Derived from Compound's cERC20 contract
  * https://github.com/compound-finance/compound-protocol/tree/master/contracts
  */

/**
  * @title Careful Math
  * @notice Derived from OpenZeppelin's SafeMath library
  *         https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/math/SafeMath.sol
  */
contract CarefulMath {

    enum MathError {
        NO_ERROR,
        DIVISION_BY_ZERO,
        INTEGER_OVERFLOW,
        INTEGER_UNDERFLOW
    }

    /**
    * @dev Multiplies two numbers, returns an error on overflow.
    */
    function mulUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (a == 0) {
            return (MathError.NO_ERROR, 0);
        }

        uint c = a * b;

        if (c / a != b) {
            return (MathError.INTEGER_OVERFLOW, 0);
        } else {
            return (MathError.NO_ERROR, c);
        }
    }

    /**
    * @dev Integer division of two numbers, truncating the quotient.
    */
    function divUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (b == 0) {
            return (MathError.DIVISION_BY_ZERO, 0);
        }

        return (MathError.NO_ERROR, a / b);
    }

    /**
    * @dev Subtracts two numbers, returns an error on overflow (i.e. if subtrahend is greater than minuend).
    */
    function subUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (b <= a) {
            return (MathError.NO_ERROR, a - b);
        } else {
            return (MathError.INTEGER_UNDERFLOW, 0);
        }
    }

    /**
    * @dev Adds two numbers, returns an error on overflow.
    */
    function addUInt(uint a, uint b) internal pure returns (MathError, uint) {
        uint c = a + b;

        if (c >= a) {
            return (MathError.NO_ERROR, c);
        } else {
            return (MathError.INTEGER_OVERFLOW, 0);
        }
    }

    /**
    * @dev add a and b and then subtract c
    */
    function addThenSubUInt(uint a, uint b, uint c) internal pure returns (MathError, uint) {
        (MathError err0, uint sum) = addUInt(a, b);

        if (err0 != MathError.NO_ERROR) {
            return (err0, 0);
        }

        return subUInt(sum, c);
    }
}

interface ControllerInterface {

    function isController() external view returns (bool);

    function enterMarkets(address[] calldata aTokens) external returns (uint[] memory);
    function exitMarket(address aToken) external returns (uint);

    function mintAllowed(address aToken, address minter, uint mintAmount) external returns (uint);
    function mintVerify(address aToken, address minter, uint mintAmount, uint mintTokens) external;

    function redeemAllowed(address aToken, address redeemer, uint redeemTokens) external returns (uint);
    function redeemVerify(address aToken, address redeemer, uint redeemAmount, uint redeemTokens) external;

    function borrowAllowed(address aToken, address borrower, uint borrowAmount) external returns (uint);
    function borrowVerify(address aToken, address borrower, uint borrowAmount) external;

    function repayBorrowAllowed(
        address aToken,
        address payer,
        address borrower,
        uint repayAmount) external returns (uint);
        
    function repayBorrowVerify(
        address aToken,
        address payer,
        address borrower,
        uint repayAmount,
        uint borrowerIndex) external;

    function liquidateBorrowAllowed(
        address aTokenBorrowed,
        address aTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount) external returns (uint);
        
    function liquidateBorrowVerify(
        address aTokenBorrowed,
        address aTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount,
        uint seizeTokens) external;

    function seizeAllowed(
        address aTokenCollateral,
        address aTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external returns (uint);
        
    function seizeVerify(
        address aTokenCollateral,
        address aTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external;

    function transferAllowed(address aToken, address src, address dst, uint transferTokens) external returns (uint);
    function transferVerify(address aToken, address src, address dst, uint transferTokens) external;

    /*** Liquidity/Liquidation Calculations ***/

    function liquidateCalculateSeizeTokens(
        address aTokenBorrowed,
        address aTokenCollateral,
        uint repayAmount) external view returns (uint, uint);
}


contract ControllerErrorReporter {

    event Failure(uint error, uint info, uint detail);


    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
    
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        CONTROLLER_MISMATCH,
        INSUFFICIENT_SHORTFALL,
        INSUFFICIENT_LIQUIDITY,
        INVALID_CLOSE_FACTOR,
        INVALID_COLLATERAL_FACTOR,
        INVALID_LIQUIDATION_INCENTIVE,
        MARKET_NOT_ENTERED,
        MARKET_NOT_LISTED,
        MARKET_ALREADY_LISTED,
        MATH_ERROR,
        NONZERO_BORROW_BALANCE,
        PRICE_ERROR,
        REJECTION,
        SNAPSHOT_ERROR,
        TOO_MANY_ASSETS,
        TOO_MUCH_REPAY
    }

    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK,
        EXIT_MARKET_BALANCE_OWED,
        EXIT_MARKET_REJECTION,
        SET_CLOSE_FACTOR_OWNER_CHECK,
        SET_CLOSE_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_NO_EXISTS,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_WITHOUT_PRICE,
        SET_IMPLEMENTATION_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_VALIDATION,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_PENDING_IMPLEMENTATION_OWNER_CHECK,
        SET_PRICE_ORACLE_OWNER_CHECK,
        SUPPORT_MARKET_EXISTS,
        SUPPORT_MARKET_OWNER_CHECK,
        ZUNUSED
    }

    
}

contract TokenErrorReporter {

    event Failure(uint error, uint info, uint detail);

    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
    
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        BAD_INPUT,
        CONTROLLER_REJECTION,
        CONTROLLER_CALCULATION_ERROR,
        INTEREST_RATE_MODEL_ERROR,
        INVALID_ACCOUNT_PAIR,
        INVALID_CLOSE_AMOUNT_REQUESTED,
        INVALID_COLLATERAL_FACTOR,
        MATH_ERROR,
        MARKET_NOT_FRESH,
        MARKET_NOT_LISTED,
        TOKEN_INSUFFICIENT_ALLOWANCE,
        TOKEN_INSUFFICIENT_BALANCE,
        TOKEN_INSUFFICIENT_CASH,
        TOKEN_TRANSFER_IN_FAILED,
        TOKEN_TRANSFER_OUT_FAILED
    }


    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCRUE_INTEREST_ACCUMULATED_INTEREST_CALCULATION_FAILED,
        ACCRUE_INTEREST_BORROW_RATE_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_BORROW_INDEX_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_BORROWS_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_RESERVES_CALCULATION_FAILED,
        ACCRUE_INTEREST_SIMPLE_INTEREST_FACTOR_CALCULATION_FAILED,
        BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        BORROW_ACCRUE_INTEREST_FAILED,
        BORROW_CASH_NOT_AVAILABLE,
        BORROW_FRESHNESS_CHECK,
        BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        BORROW_MARKET_NOT_LISTED,
        BORROW_CONTROLLER_REJECTION,
        LIQUIDATE_ACCRUE_BORROW_INTEREST_FAILED,
        LIQUIDATE_ACCRUE_COLLATERAL_INTEREST_FAILED,
        LIQUIDATE_COLLATERAL_FRESHNESS_CHECK,
        LIQUIDATE_CONTROLLER_REJECTION,
        LIQUIDATE_CONTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED,
        LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX,
        LIQUIDATE_CLOSE_AMOUNT_IS_ZERO,
        LIQUIDATE_FRESHNESS_CHECK,
        LIQUIDATE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_REPAY_BORROW_FRESH_FAILED,
        LIQUIDATE_SEIZE_BALANCE_INCREMENT_FAILED,
        LIQUIDATE_SEIZE_BALANCE_DECREMENT_FAILED,
        LIQUIDATE_SEIZE_CONTROLLER_REJECTION,
        LIQUIDATE_SEIZE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_SEIZE_TOO_MUCH,
        MINT_ACCRUE_INTEREST_FAILED,
        MINT_CONTROLLER_REJECTION,
        MINT_EXCHANGE_CALCULATION_FAILED,
        MINT_EXCHANGE_RATE_READ_FAILED,
        MINT_FRESHNESS_CHECK,
        MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        MINT_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        MINT_TRANSFER_IN_FAILED,
        MINT_TRANSFER_IN_NOT_POSSIBLE,
        REDEEM_ACCRUE_INTEREST_FAILED,
        REDEEM_CONTROLLER_REJECTION,
        REDEEM_EXCHANGE_TOKENS_CALCULATION_FAILED,
        REDEEM_EXCHANGE_AMOUNT_CALCULATION_FAILED,
        REDEEM_EXCHANGE_RATE_READ_FAILED,
        REDEEM_FRESHNESS_CHECK,
        REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        REDEEM_TRANSFER_OUT_NOT_POSSIBLE,
        REDUCE_RESERVES_ACCRUE_INTEREST_FAILED,
        REDUCE_RESERVES_ADMIN_CHECK,
        REDUCE_RESERVES_CASH_NOT_AVAILABLE,
        REDUCE_RESERVES_FRESH_CHECK,
        REDUCE_RESERVES_VALIDATION,
        REPAY_BEHALF_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_CONTROLLER_REJECTION,
        REPAY_BORROW_FRESHNESS_CHECK,
        REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_TRANSFER_IN_NOT_POSSIBLE,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_CONTROLLER_OWNER_CHECK,
        SET_INTEREST_RATE_MODEL_ACCRUE_INTEREST_FAILED,
        SET_INTEREST_RATE_MODEL_FRESH_CHECK,
        SET_INTEREST_RATE_MODEL_OWNER_CHECK,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_ORACLE_MARKET_NOT_LISTED,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_RESERVE_FACTOR_ACCRUE_INTEREST_FAILED,
        SET_RESERVE_FACTOR_ADMIN_CHECK,
        SET_RESERVE_FACTOR_FRESH_CHECK,
        SET_RESERVE_FACTOR_BOUNDS_CHECK,
        TRANSFER_CONTROLLER_REJECTION,
        TRANSFER_NOT_ALLOWED,
        TRANSFER_NOT_ENOUGH,
        TRANSFER_TOO_MUCH
    }


}


contract Exponential is CarefulMath {
    uint constant expScale = 1e18;
    uint constant halfExpScale = expScale/2;
    uint constant mantissaOne = expScale;

    struct Exp {
        uint mantissa;
    }

    function getExp(uint num, uint denom) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint scaledNumerator) = mulUInt(num, expScale);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        (MathError err1, uint rational) = divUInt(scaledNumerator, denom);
        if (err1 != MathError.NO_ERROR) {
            return (err1, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: rational}));
    }

    function addExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        (MathError error, uint result) = addUInt(a.mantissa, b.mantissa);

        return (error, Exp({mantissa: result}));
    }

    function subExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        (MathError error, uint result) = subUInt(a.mantissa, b.mantissa);

        return (error, Exp({mantissa: result}));
    }

    function mulScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint scaledMantissa) = mulUInt(a.mantissa, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: scaledMantissa}));
    }

    function mulScalarTruncate(Exp memory a, uint scalar) pure internal returns (MathError, uint) {
        (MathError err, Exp memory product) = mulScalar(a, scalar);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return (MathError.NO_ERROR, truncate(product));
    }

    function mulScalarTruncateAddUInt(Exp memory a, uint scalar, uint addend) pure internal returns (MathError, uint) {
        (MathError err, Exp memory product) = mulScalar(a, scalar);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return addUInt(truncate(product), addend);
    }

    function divScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint descaledMantissa) = divUInt(a.mantissa, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: descaledMantissa}));
    }

    function divScalarByExp(uint scalar, Exp memory divisor) pure internal returns (MathError, Exp memory) {
        /*
          We are doing this as:
          getExp(mulUInt(expScale, scalar), divisor.mantissa)

          How it works:
          Exp = a / b;
          Scalar = s;
          `s / (a / b)` = `b * s / a` and since for an Exp `a = mantissa, b = expScale`
        */
        (MathError err0, uint numerator) = mulUInt(expScale, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }
        return getExp(numerator, divisor.mantissa);
    }

    function divScalarByExpTruncate(uint scalar, Exp memory divisor) pure internal returns (MathError, uint) {
        (MathError err, Exp memory fraction) = divScalarByExp(scalar, divisor);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return (MathError.NO_ERROR, truncate(fraction));
    }

    function mulExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {

        (MathError err0, uint doubleScaledProduct) = mulUInt(a.mantissa, b.mantissa);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        // We add half the scale before dividing so that we get rounding instead of truncation.
        //  See "Listing 6" and text above it at https://accu.org/index.php/journals/1717
        // Without this change, a result like 6.6...e-19 will be truncated to 0 instead of being rounded to 1e-18.
        (MathError err1, uint doubleScaledProductWithHalfScale) = addUInt(halfExpScale, doubleScaledProduct);
        if (err1 != MathError.NO_ERROR) {
            return (err1, Exp({mantissa: 0}));
        }

        (MathError err2, uint product) = divUInt(doubleScaledProductWithHalfScale, expScale);
        // The only error `div` can return is MathError.DIVISION_BY_ZERO but we control `expScale` and it is not zero.
        assert(err2 == MathError.NO_ERROR);

        return (MathError.NO_ERROR, Exp({mantissa: product}));
    }

    function mulExp(uint a, uint b) pure internal returns (MathError, Exp memory) {
        return mulExp(Exp({mantissa: a}), Exp({mantissa: b}));
    }

    function mulExp3(Exp memory a, Exp memory b, Exp memory c) pure internal returns (MathError, Exp memory) {
        (MathError err, Exp memory ab) = mulExp(a, b);
        if (err != MathError.NO_ERROR) {
            return (err, ab);
        }
        return mulExp(ab, c);
    }

    function divExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        return getExp(a.mantissa, b.mantissa);
    }

    function truncate(Exp memory exp) pure internal returns (uint) {
        // Note: We are not using careful math here as we're performing a division that cannot fail
        return exp.mantissa / expScale;
    }

    function lessThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa < right.mantissa; //TODO: Add some simple tests and this in another PR yo.
    }

    function lessThanOrEqualExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa <= right.mantissa;
    }

    function isZeroExp(Exp memory value) pure internal returns (bool) {
        return value.mantissa == 0;
    }
}

/**
 * @title ERC 20 Token Standard Interface
 *  https://eips.ethereum.org/EIPS/eip-20
 */
interface EIP20Interface {

    /**
      * @notice Get the total number of tokens in circulation
      * @return The supply of tokens
      */
    function totalSupply() external view returns (uint256);

    /**
     * @notice Gets the balance of the specified address
     * @param owner The address from which the balance will be retrieved
     * @return The balance
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
      * @notice Transfer `amount` tokens from `msg.sender` to `dst`
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return Whether or not the transfer succeeded
      */
    function transfer(address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Transfer `amount` tokens from `src` to `dst`
      * @param src The address of the source account
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return Whether or not the transfer succeeded
      */
    function transferFrom(address src, address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Approve `spender` to transfer up to `amount` from `src`
      * @dev This will overwrite the approval amount for `spender`
      *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
      * @param spender The address of the account which may transfer tokens
      * @param amount The number of tokens that are approved (-1 means infinite)
      * @return Whether or not the approval succeeded
      */
    function approve(address spender, uint256 amount) external returns (bool success);

    /**
      * @notice Get the current allowance from `owner` for `spender`
      * @param owner The address of the account which owns the tokens to be spent
      * @param spender The address of the account which may transfer tokens
      * @return The number of tokens allowed to be spent (-1 means infinite)
      */
    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}


/**
 *  @title EIP20NonStandardInterface
 *  notice: Version of ERC20 with no return values for `transfer` and `transferFrom`
 *  See https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
 */
interface EIP20NonStandardInterface {

    function totalSupply() external view returns (uint256);

    function balanceOf(address owner) external view returns (uint256 balance);

    function transfer(address dst, uint256 amount) external;

    function transferFrom(address src, address dst, uint256 amount) external;

    function approve(address spender, uint256 amount) external returns (bool success);

    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}


/**
 * @title Helps contracts guard against reentrancy attacks.
 * @author Remco Bloemen <remco@2π.com>, Eenae <alexey@mixbytes.io>
 * @dev If you mark a function `nonReentrant`, you should also
 * mark it `external`.
 */
contract ReentrancyGuard {
    /// @dev counter to allow mutex lock with only one SSTORE operation
    uint256 private _guardCounter;

    constructor () public {
        // The counter starts at one to prevent changing it from zero to a non-zero
        // value, which is a more expensive operation.
        _guardCounter = 1;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter, "re-entered");
    }
}


interface InterestRateModel {

    function getBorrowRate(uint cash, uint borrows, uint reserves) external view returns (uint, uint);

    function isInterestRateModel() external view returns (bool);
}


contract AToken is EIP20Interface, Exponential, TokenErrorReporter, ReentrancyGuard {
    /**
     * @notice Indicator that this is a AToken contract (for inspection)
     */
    bool public constant isAToken = true;

    /**
     * @notice EIP-20 token name for this token
     */
    string public name;

    /**
     * @notice EIP-20 token symbol for this token
     */
    string public symbol;

    /**
     * @notice EIP-20 token decimals for this token
     */
    uint public decimals;

    /**
     * @notice Maximum borrow rate that can ever be applied (.0005% / block)
     */
    uint constant borrowRateMaxMantissa = 5e14;

    /**
     * @notice Maximum fraction of interest that can be set aside for reserves
     */
    uint constant reserveFactorMaxMantissa = 1e18;

    /**
     * @notice Administrator for this contract
     */
    address payable public admin;

    /**
     * @notice Pending administrator for this contract
     */
    address payable public pendingAdmin;

    /**
     * @notice Contract which oversees inter-aToken operations
     */
    ControllerInterface public controller;

    /**
     * @notice Model which tells what the current interest rate should be
     */
    InterestRateModel public interestRateModel;

    /**
     * @notice Initial exchange rate used when minting the first ATokens (used when totalSupply = 0)
     */
    uint public initialExchangeRateMantissa;

    /**
     * @notice Fraction of interest currently set aside for reserves
     */
    uint public reserveFactorMantissa;

    /**
     * @notice Block number that interest was last accrued at
     */
    uint public accrualBlockNumber;

    /**
     * @notice Accumulator of total earned interest since the opening of the market
     */
    uint public borrowIndex;

    /**
     * @notice Total amount of outstanding borrows of the underlying in this market
     */
    uint public totalBorrows;

    /**
     * @notice Total amount of reserves of the underlying held in this market
     */
    uint public totalReserves;

    /**
     * @notice Total number of tokens in circulation
     */
    uint256 public totalSupply;

    /**
     * @notice Official record of token balances for each account
     */
    mapping (address => uint256) accountTokens;

    /**
     * @notice Approved token transfer amounts on behalf of others
     */
    mapping (address => mapping (address => uint256)) transferAllowances;

    /**
     * @notice Container for borrow balance information
     * @member principal Total balance (with accrued interest), after applying the most recent balance-changing action
     * @member interestIndex Global borrowIndex as of the most recent balance-changing action
     */
    struct BorrowSnapshot {
        uint principal;
        uint interestIndex;
    }

    /**
     * @notice Mapping of account addresses to outstanding borrow balances
     */
    mapping(address => BorrowSnapshot) accountBorrows;


    /*** Market Events ***/

    /**
     * @notice Event emitted when interest is accrued
     */
    event AccrueInterest(uint interestAccumulated, uint borrowIndex, uint totalBorrows);

    /**
     * @notice Event emitted when tokens are minted
     */
    event Mint(address minter, uint mintAmount, uint mintTokens);

    /**
     * @notice Event emitted when tokens are redeemed
     */
    event Redeem(address redeemer, uint redeemAmount, uint redeemTokens);

    /**
     * @notice Event emitted when underlying is borrowed
     */
    event Borrow(address borrower, uint borrowAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is repaid
     */
    event RepayBorrow(address payer, address borrower, uint repayAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is liquidated
     */
    event LiquidateBorrow(address liquidator, address borrower, uint repayAmount, address aTokenCollateral, uint seizeTokens);


    /*** Admin Events ***/

    /**
     * @notice Event emitted when pendingAdmin is changed
     */
    event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);

    /**
     * @notice Event emitted when pendingAdmin is accepted, which means admin is updated
     */
    event NewAdmin(address oldAdmin, address newAdmin);

    /**
     * @notice Event emitted when controller is changed
     */
    event NewController(ControllerInterface oldController, ControllerInterface newController);

    /**
     * @notice Event emitted when interestRateModel is changed
     */
    event NewMarketInterestRateModel(InterestRateModel oldInterestRateModel, InterestRateModel newInterestRateModel);

    /**
     * @notice Event emitted when the reserve factor is changed
     */
    event NewReserveFactor(uint oldReserveFactorMantissa, uint newReserveFactorMantissa);

    /**
     * @notice Event emitted when the reserves are reduced
     */
    event ReservesReduced(address admin, uint reduceAmount, uint newTotalReserves);

    constructor( ) public { 
        admin = msg.sender;

        // Set initial exchange rate
        initialExchangeRateMantissa = uint(200000000000000000000000000);

        // Initialize block number and borrow index (block number mocks depend on controller being set)
        accrualBlockNumber = getBlockNumber();
        borrowIndex = mantissaOne;

        name = string("Artem cVault.finance");
        symbol = string("aCORE");
        decimals = uint(8);
    }

    function transferTokens(address spender, address src, address dst, uint tokens) internal returns (uint) {
        /* Fail if transfer not allowed */
        uint allowed = controller.transferAllowed(address(this), src, dst, tokens);
        if (allowed != 0) {
            return failOpaque(Error.CONTROLLER_REJECTION, FailureInfo.TRANSFER_CONTROLLER_REJECTION, allowed);
        }

        /* Do not allow self-transfers */
        if (src == dst) {
            return fail(Error.BAD_INPUT, FailureInfo.TRANSFER_NOT_ALLOWED);
        }

        /* Get the allowance, infinite for the account owner */
        uint startingAllowance = 0;
        if (spender == src) {
            startingAllowance = uint(-1);
        } else {
            startingAllowance = transferAllowances[src][spender];
        }

        /* Do the calculations, checking for {under,over}flow */
        MathError mathErr;
        uint allowanceNew;
        uint srcTokensNew;
        uint dstTokensNew;

        (mathErr, allowanceNew) = subUInt(startingAllowance, tokens);
        if (mathErr != MathError.NO_ERROR) {
            return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_NOT_ALLOWED);
        }

        (mathErr, srcTokensNew) = subUInt(accountTokens[src], tokens);
        if (mathErr != MathError.NO_ERROR) {
            return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_NOT_ENOUGH);
        }

        (mathErr, dstTokensNew) = addUInt(accountTokens[dst], tokens);
        if (mathErr != MathError.NO_ERROR) {
            return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_TOO_MUCH);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        accountTokens[src] = srcTokensNew;
        accountTokens[dst] = dstTokensNew;

        /* Eat some of the allowance (if necessary) */
        if (startingAllowance != uint(-1)) {
            transferAllowances[src][spender] = allowanceNew;
        }

        /* We emit a Transfer event */
        emit Transfer(src, dst, tokens);

        /* We call the defense hook (which checks for under-collateralization) */
        controller.transferVerify(address(this), src, dst, tokens);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Transfer `amount` tokens from `msg.sender` to `dst`
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transfer(address dst, uint256 amount) external nonReentrant returns (bool) {
        return transferTokens(msg.sender, msg.sender, dst, amount) == uint(Error.NO_ERROR);
    }

    /**
     * @notice Transfer `amount` tokens from `src` to `dst`
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferFrom(address src, address dst, uint256 amount) external nonReentrant returns (bool) {
        return transferTokens(msg.sender, src, dst, amount) == uint(Error.NO_ERROR);
    }

    /**
     * @notice Approve `spender` to transfer up to `amount` from `src`
     * @dev This will overwrite the approval amount for `spender`
     *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
     * @param spender The address of the account which may transfer tokens
     * @param amount The number of tokens that are approved (-1 means infinite)
     * @return Whether or not the approval succeeded
     */
    function approve(address spender, uint256 amount) external returns (bool) {
        address src = msg.sender;
        transferAllowances[src][spender] = amount;
        emit Approval(src, spender, amount);
        return true;
    }

    /**
     * @notice Get the current allowance from `owner` for `spender`
     * @param owner The address of the account which owns the tokens to be spent
     * @param spender The address of the account which may transfer tokens
     * @return The number of tokens allowed to be spent (-1 means infinite)
     */
    function allowance(address owner, address spender) external view returns (uint256) {
        return transferAllowances[owner][spender];
    }

    /**
     * @notice Get the token balance of the `owner`
     * @param owner The address of the account to query
     * @return The number of tokens owned by `owner`
     */
    function balanceOf(address owner) external view returns (uint256) {
        return accountTokens[owner];
    }

    /**
     * @notice Get the underlying balance of the `owner`
     * @dev This also accrues interest in a transaction
     * @param owner The address of the account to query
     * @return The amount of underlying owned by `owner`
     */
    function balanceOfUnderlying(address owner) external returns (uint) {
        Exp memory exchangeRate = Exp({mantissa: exchangeRateCurrent()});
        (MathError mErr, uint balance) = mulScalarTruncate(exchangeRate, accountTokens[owner]);
        require(mErr == MathError.NO_ERROR);
        return balance;
    }

    /**
     * @notice Get a snapshot of the account's balances, and the cached exchange rate
     * @dev This is used by controller to more efficiently perform liquidity checks.
     * @param account Address of the account to snapshot
     * @return (possible error, token balance, borrow balance, exchange rate mantissa)
     */
    function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint) {
        uint aTokenBalance = accountTokens[account];
        uint borrowBalance;
        uint exchangeRateMantissa;

        MathError mErr;

        (mErr, borrowBalance) = borrowBalanceStoredInternal(account);
        if (mErr != MathError.NO_ERROR) {
            return (uint(Error.MATH_ERROR), 0, 0, 0);
        }

        (mErr, exchangeRateMantissa) = exchangeRateStoredInternal();
        if (mErr != MathError.NO_ERROR) {
            return (uint(Error.MATH_ERROR), 0, 0, 0);
        }

        return (uint(Error.NO_ERROR), aTokenBalance, borrowBalance, exchangeRateMantissa);
    }

    /**
     * @dev Function to simply retrieve block number
     *  This exists mainly for inheriting test contracts to stub this result.
     */
    function getBlockNumber() internal view returns (uint) {
        return block.number;
    }

    /**
     * @notice Returns the current per-block borrow interest rate for this aToken
     * @return The borrow interest rate per block, scaled by 1e18
     */
    function borrowRatePerBlock() external view returns (uint) {
        (uint opaqueErr, uint borrowRateMantissa) = interestRateModel.getBorrowRate(getCashPrior(), totalBorrows, totalReserves);
        require(opaqueErr == 0, "borrowRatePerBlock: interestRateModel.borrowRate failed"); // semi-opaque
        return borrowRateMantissa;
    }

    /**
     * @notice Returns the current per-block supply interest rate for this aToken
     * @return The supply interest rate per block, scaled by 1e18
     */
    function supplyRatePerBlock() external view returns (uint) {
        /* We calculate the supply rate:
         *  underlying = totalSupply × exchangeRate
         *  borrowsPer = totalBorrows ÷ underlying
         *  supplyRate = borrowRate × (1-reserveFactor) × borrowsPer
         */
        uint exchangeRateMantissa = exchangeRateStored();

        (uint e0, uint borrowRateMantissa) = interestRateModel.getBorrowRate(getCashPrior(), totalBorrows, totalReserves);
        require(e0 == 0, "supplyRatePerBlock: calculating borrowRate failed"); // semi-opaque

        (MathError e1, Exp memory underlying) = mulScalar(Exp({mantissa: exchangeRateMantissa}), totalSupply);
        require(e1 == MathError.NO_ERROR, "supplyRatePerBlock: calculating underlying failed");

        (MathError e2, Exp memory borrowsPer) = divScalarByExp(totalBorrows, underlying);
        require(e2 == MathError.NO_ERROR, "supplyRatePerBlock: calculating borrowsPer failed");

        (MathError e3, Exp memory oneMinusReserveFactor) = subExp(Exp({mantissa: mantissaOne}), Exp({mantissa: reserveFactorMantissa}));
        require(e3 == MathError.NO_ERROR, "supplyRatePerBlock: calculating oneMinusReserveFactor failed");

        (MathError e4, Exp memory supplyRate) = mulExp3(Exp({mantissa: borrowRateMantissa}), oneMinusReserveFactor, borrowsPer);
        require(e4 == MathError.NO_ERROR, "supplyRatePerBlock: calculating supplyRate failed");

        return supplyRate.mantissa;
    }

    /**
     * @notice Returns the current total borrows plus accrued interest
     * @return The total borrows with interest
     */
    function totalBorrowsCurrent() external nonReentrant returns (uint) {
        require(accrueInterest() == uint(Error.NO_ERROR), "accrue interest failed");
        return totalBorrows;
    }

    /**
     * @notice Accrue interest to updated borrowIndex and then calculate account's borrow balance using the updated borrowIndex
     * @param account The address whose balance should be calculated after updating borrowIndex
     * @return The calculated balance
     */
    function borrowBalanceCurrent(address account) external nonReentrant returns (uint) {
        require(accrueInterest() == uint(Error.NO_ERROR), "accrue interest failed");
        return borrowBalanceStored(account);
    }

    /**
     * @notice Return the borrow balance of account based on stored data
     * @param account The address whose balance should be calculated
     * @return The calculated balance
     */
    function borrowBalanceStored(address account) public view returns (uint) {
        (MathError err, uint result) = borrowBalanceStoredInternal(account);
        require(err == MathError.NO_ERROR, "borrowBalanceStored: borrowBalanceStoredInternal failed");
        return result;
    }

    /**
     * @notice Return the borrow balance of account based on stored data
     * @param account The address whose balance should be calculated
     * @return (error code, the calculated balance or 0 if error code is non-zero)
     */
    function borrowBalanceStoredInternal(address account) internal view returns (MathError, uint) {
        /* Note: we do not assert that the market is up to date */
        MathError mathErr;
        uint principalTimesIndex;
        uint result;

        /* Get borrowBalance and borrowIndex */
        BorrowSnapshot storage borrowSnapshot = accountBorrows[account];

        /* If borrowBalance = 0 then borrowIndex is likely also 0.
         * Rather than failing the calculation with a division by 0, we immediately return 0 in this case.
         */
        if (borrowSnapshot.principal == 0) {
            return (MathError.NO_ERROR, 0);
        }

        /* Calculate new borrow balance using the interest index:
         *  recentBorrowBalance = borrower.borrowBalance * market.borrowIndex / borrower.borrowIndex
         */
        (mathErr, principalTimesIndex) = mulUInt(borrowSnapshot.principal, borrowIndex);
        if (mathErr != MathError.NO_ERROR) {
            return (mathErr, 0);
        }

        (mathErr, result) = divUInt(principalTimesIndex, borrowSnapshot.interestIndex);
        if (mathErr != MathError.NO_ERROR) {
            return (mathErr, 0);
        }

        return (MathError.NO_ERROR, result);
    }

    /**
     * @notice Accrue interest then return the up-to-date exchange rate
     * @return Calculated exchange rate scaled by 1e18
     */
    function exchangeRateCurrent() public nonReentrant returns (uint) {
        require(accrueInterest() == uint(Error.NO_ERROR), "accrue interest failed");
        return exchangeRateStored();
    }

    /**
     * @notice Calculates the exchange rate from the underlying to the AToken
     * @dev This function does not accrue interest before calculating the exchange rate
     * @return Calculated exchange rate scaled by 1e18
     */
    function exchangeRateStored() public view returns (uint) {
        (MathError err, uint result) = exchangeRateStoredInternal();
        require(err == MathError.NO_ERROR, "exchangeRateStored: exchangeRateStoredInternal failed");
        return result;
    }

    /**
     * @notice Calculates the exchange rate from the underlying to the AToken
     * @dev This function does not accrue interest before calculating the exchange rate
     * @return (error code, calculated exchange rate scaled by 1e18)
     */
    function exchangeRateStoredInternal() internal view returns (MathError, uint) {
        if (totalSupply == 0) {
            /*
             * If there are no tokens minted:
             *  exchangeRate = initialExchangeRate
             */
            return (MathError.NO_ERROR, initialExchangeRateMantissa);
        } else {
            /*
             * Otherwise:
             *  exchangeRate = (totalCash + totalBorrows - totalReserves) / totalSupply
             */
            uint totalCash = getCashPrior();
            uint cashPlusBorrowsMinusReserves;
            Exp memory exchangeRate;
            MathError mathErr;

            (mathErr, cashPlusBorrowsMinusReserves) = addThenSubUInt(totalCash, totalBorrows, totalReserves);
            if (mathErr != MathError.NO_ERROR) {
                return (mathErr, 0);
            }

            (mathErr, exchangeRate) = getExp(cashPlusBorrowsMinusReserves, totalSupply);
            if (mathErr != MathError.NO_ERROR) {
                return (mathErr, 0);
            }

            return (MathError.NO_ERROR, exchangeRate.mantissa);
        }
    }

    /**
     * @notice Get cash balance of this aToken in the underlying asset
     * @return The quantity of underlying asset owned by this contract
     */
    function getCash() external view returns (uint) {
        return getCashPrior();
    }

    struct AccrueInterestLocalVars {
        MathError mathErr;
        uint opaqueErr;
        uint borrowRateMantissa;
        uint currentBlockNumber;
        uint blockDelta;

        Exp simpleInterestFactor;

        uint interestAccumulated;
        uint totalBorrowsNew;
        uint totalReservesNew;
        uint borrowIndexNew;
    }
    
    
    /**
      * @notice Applies accrued interest to total borrows and reserves.
      * @dev This calculates interest accrued from the last checkpointed block
      *      up to the current block and writes new checkpoint to storage.
      */
    function accrueInterest() public returns (uint) {
        AccrueInterestLocalVars memory vars;

        /* Calculate the current borrow interest rate */
        (vars.opaqueErr, vars.borrowRateMantissa) = interestRateModel.getBorrowRate(getCashPrior(), totalBorrows, totalReserves);

        require(vars.borrowRateMantissa <= borrowRateMaxMantissa, "borrow rate is absurdly high");
        if (vars.opaqueErr != 0) {
            return failOpaque(Error.INTEREST_RATE_MODEL_ERROR, FailureInfo.ACCRUE_INTEREST_BORROW_RATE_CALCULATION_FAILED, vars.opaqueErr);
        }

        /* Remember the initial block number */
        vars.currentBlockNumber = getBlockNumber();

        /* Calculate the number of blocks elapsed since the last accrual */
        (vars.mathErr, vars.blockDelta) = subUInt(vars.currentBlockNumber, accrualBlockNumber);
        assert(vars.mathErr == MathError.NO_ERROR); // Block delta should always succeed and if it doesn't, blow up.

        /*
         * Calculate the interest accumulated into borrows and reserves and the new index:
         *  simpleInterestFactor = borrowRate * blockDelta
         *  interestAccumulated = simpleInterestFactor * totalBorrows
         *  totalBorrowsNew = interestAccumulated + totalBorrows
         *  totalReservesNew = interestAccumulated * reserveFactor + totalReserves
         *  borrowIndexNew = simpleInterestFactor * borrowIndex + borrowIndex
         */
        (vars.mathErr, vars.simpleInterestFactor) = mulScalar(Exp({mantissa: vars.borrowRateMantissa}), vars.blockDelta);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_SIMPLE_INTEREST_FACTOR_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.interestAccumulated) = mulScalarTruncate(vars.simpleInterestFactor, totalBorrows);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_ACCUMULATED_INTEREST_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.totalBorrowsNew) = addUInt(vars.interestAccumulated, totalBorrows);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_NEW_TOTAL_BORROWS_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.totalReservesNew) = mulScalarTruncateAddUInt(Exp({mantissa: reserveFactorMantissa}), vars.interestAccumulated, totalReserves);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_NEW_TOTAL_RESERVES_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.borrowIndexNew) = mulScalarTruncateAddUInt(vars.simpleInterestFactor, borrowIndex, borrowIndex);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_NEW_BORROW_INDEX_CALCULATION_FAILED, uint(vars.mathErr));
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We write the previously calculated values into storage */
        accrualBlockNumber = vars.currentBlockNumber;
        borrowIndex = vars.borrowIndexNew;
        totalBorrows = vars.totalBorrowsNew;
        totalReserves = vars.totalReservesNew;

        /* We emit an AccrueInterest event */
        emit AccrueInterest(vars.interestAccumulated, vars.borrowIndexNew, totalBorrows);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Sender supplies assets into the market and receives aTokens in exchange
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param mintAmount The amount of the underlying asset to supply
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function mintInternal(uint mintAmount) internal nonReentrant returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
            return fail(Error(error), FailureInfo.MINT_ACCRUE_INTEREST_FAILED);
        }
        // mintFresh emits the actual Mint event if successful and logs on errors, so we don't need to
        return mintFresh(msg.sender, mintAmount);
    }

    struct MintLocalVars {
        Error err;
        MathError mathErr;
        uint exchangeRateMantissa;
        uint mintTokens;
        uint totalSupplyNew;
        uint accountTokensNew;
    }
    
    /**
     * @notice User supplies assets into the market and receives aTokens in exchange
     * @dev Assumes interest has already been accrued up to the current block
     * @param minter The address of the account which is supplying the assets
     * @param mintAmount The amount of the underlying asset to supply
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function mintFresh(address minter, uint mintAmount) internal returns (uint) {
        /* Fail if mint not allowed */
        uint allowed = controller.mintAllowed(address(this), minter, mintAmount);
        if (allowed != 0) {
            return failOpaque(Error.CONTROLLER_REJECTION, FailureInfo.MINT_CONTROLLER_REJECTION, allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.MINT_FRESHNESS_CHECK);
        }

        MintLocalVars memory vars;

        /* Fail if checkTransferIn fails */
        vars.err = checkTransferIn(minter, mintAmount);
        if (vars.err != Error.NO_ERROR) {
            return fail(vars.err, FailureInfo.MINT_TRANSFER_IN_NOT_POSSIBLE);
        }

        /*
         * We get the current exchange rate and calculate the number of aTokens to be minted:
         *  mintTokens = mintAmount / exchangeRate
         */
        (vars.mathErr, vars.exchangeRateMantissa) = exchangeRateStoredInternal();
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.MINT_EXCHANGE_RATE_READ_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.mintTokens) = divScalarByExpTruncate(mintAmount, Exp({mantissa: vars.exchangeRateMantissa}));
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.MINT_EXCHANGE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        /*
         * We calculate the new total supply of aTokens and minter token balance, checking for overflow:
         *  totalSupplyNew = totalSupply + mintTokens
         *  accountTokensNew = accountTokens[minter] + mintTokens
         */
        (vars.mathErr, vars.totalSupplyNew) = addUInt(totalSupply, vars.mintTokens);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.MINT_NEW_TOTAL_SUPPLY_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.accountTokensNew) = addUInt(accountTokens[minter], vars.mintTokens);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We call doTransferIn for the minter and the mintAmount
         *  Note: The aToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the aToken holds an additional mintAmount of cash.
         *  If doTransferIn fails despite the fact we checked pre-conditions,
         *   we revert because we can't be sure if side effects occurred.
         */
        vars.err = doTransferIn(minter, mintAmount);
        if (vars.err != Error.NO_ERROR) {
            return fail(vars.err, FailureInfo.MINT_TRANSFER_IN_FAILED);
        }

        /* We write previously calculated values into storage */
        totalSupply = vars.totalSupplyNew;
        accountTokens[minter] = vars.accountTokensNew;

        /* We emit a Mint event, and a Transfer event */
        emit Mint(minter, mintAmount, vars.mintTokens);
        emit Transfer(address(this), minter, vars.mintTokens);

        /* We call the defense hook */
        controller.mintVerify(address(this), minter, mintAmount, vars.mintTokens);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Sender redeems aTokens in exchange for the underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemTokens The number of aTokens to redeem into underlying
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemInternal(uint redeemTokens) internal nonReentrant returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted redeem failed
            return fail(Error(error), FailureInfo.REDEEM_ACCRUE_INTEREST_FAILED);
        }
        // redeemFresh emits redeem-specific logs on errors, so we don't need to
        return redeemFresh(msg.sender, redeemTokens, 0);
    }

    /**
     * @notice Sender redeems aTokens in exchange for a specified amount of underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemAmount The amount of underlying to redeem
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemUnderlyingInternal(uint redeemAmount) internal nonReentrant returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted redeem failed
            return fail(Error(error), FailureInfo.REDEEM_ACCRUE_INTEREST_FAILED);
        }
        // redeemFresh emits redeem-specific logs on errors, so we don't need to
        return redeemFresh(msg.sender, 0, redeemAmount);
    }

    struct RedeemLocalVars {
        Error err;
        MathError mathErr;
        uint exchangeRateMantissa;
        uint redeemTokens;
        uint redeemAmount;
        uint totalSupplyNew;
        uint accountTokensNew;
    }

    /**
     * @notice User redeems aTokens in exchange for the underlying asset
     * @dev Assumes interest has already been accrued up to the current block
     * @param redeemer The address of the account which is redeeming the tokens
     * @param redeemTokensIn The number of aTokens to redeem into underlying (only one of redeemTokensIn or redeemAmountIn may be zero)
     * @param redeemAmountIn The number of aTokens to redeem into underlying (only one of redeemTokensIn or redeemAmountIn may be zero)
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemFresh(address payable redeemer, uint redeemTokensIn, uint redeemAmountIn) internal returns (uint) {
        require(redeemTokensIn == 0 || redeemAmountIn == 0, "one of redeemTokensIn or redeemAmountIn must be zero");

        RedeemLocalVars memory vars;

        /* exchangeRate = invoke Exchange Rate Stored() */
        (vars.mathErr, vars.exchangeRateMantissa) = exchangeRateStoredInternal();
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_EXCHANGE_RATE_READ_FAILED, uint(vars.mathErr));
        }

        /* If redeemTokensIn > 0: */
        if (redeemTokensIn > 0) {
            /*
             * We calculate the exchange rate and the amount of underlying to be redeemed:
             *  redeemTokens = redeemTokensIn
             *  redeemAmount = redeemTokensIn x exchangeRateCurrent
             */
            vars.redeemTokens = redeemTokensIn;

            (vars.mathErr, vars.redeemAmount) = mulScalarTruncate(Exp({mantissa: vars.exchangeRateMantissa}), redeemTokensIn);
            if (vars.mathErr != MathError.NO_ERROR) {
                return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_EXCHANGE_TOKENS_CALCULATION_FAILED, uint(vars.mathErr));
            }
        } else {
            /*
             * We get the current exchange rate and calculate the amount to be redeemed:
             *  redeemTokens = redeemAmountIn / exchangeRate
             *  redeemAmount = redeemAmountIn
             */

            (vars.mathErr, vars.redeemTokens) = divScalarByExpTruncate(redeemAmountIn, Exp({mantissa: vars.exchangeRateMantissa}));
            if (vars.mathErr != MathError.NO_ERROR) {
                return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_EXCHANGE_AMOUNT_CALCULATION_FAILED, uint(vars.mathErr));
            }

            vars.redeemAmount = redeemAmountIn;
        }

        /* Fail if redeem not allowed */
        uint allowed = controller.redeemAllowed(address(this), redeemer, vars.redeemTokens);
        if (allowed != 0) {
            return failOpaque(Error.CONTROLLER_REJECTION, FailureInfo.REDEEM_CONTROLLER_REJECTION, allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.REDEEM_FRESHNESS_CHECK);
        }

        /*
         * We calculate the new total supply and redeemer balance, checking for underflow:
         *  totalSupplyNew = totalSupply - redeemTokens
         *  accountTokensNew = accountTokens[redeemer] - redeemTokens
         */
        (vars.mathErr, vars.totalSupplyNew) = subUInt(totalSupply, vars.redeemTokens);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.accountTokensNew) = subUInt(accountTokens[redeemer], vars.redeemTokens);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        /* Fail gracefully if protocol has insufficient cash */
        if (getCashPrior() < vars.redeemAmount) {
            return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.REDEEM_TRANSFER_OUT_NOT_POSSIBLE);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We invoke doTransferOut for the redeemer and the redeemAmount.
         *  Note: The aToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the aToken has redeemAmount less of cash.
         *  If doTransferOut fails despite the fact we checked pre-conditions,
         *   we revert because we can't be sure if side effects occurred.
         */
        vars.err = doTransferOut(redeemer, vars.redeemAmount);
        require(vars.err == Error.NO_ERROR, "redeem transfer out failed");

        /* We write previously calculated values into storage */
        totalSupply = vars.totalSupplyNew;
        accountTokens[redeemer] = vars.accountTokensNew;

        /* We emit a Transfer event, and a Redeem event */
        emit Transfer(redeemer, address(this), vars.redeemTokens);
        emit Redeem(redeemer, vars.redeemAmount, vars.redeemTokens);

        /* We call the defense hook */
        controller.redeemVerify(address(this), redeemer, vars.redeemAmount, vars.redeemTokens);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Sender borrows assets from the protocol to their own address
      * @param borrowAmount The amount of the underlying asset to borrow
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function borrowInternal(uint borrowAmount) internal nonReentrant returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
            return fail(Error(error), FailureInfo.BORROW_ACCRUE_INTEREST_FAILED);
        }
        // borrowFresh emits borrow-specific logs on errors, so we don't need to
        return borrowFresh(msg.sender, borrowAmount);
    }

    struct BorrowLocalVars {
        Error err;
        MathError mathErr;
        uint accountBorrows;
        uint accountBorrowsNew;
        uint totalBorrowsNew;
    }

    /**
      * @notice Users borrow assets from the protocol to their own address
      * @param borrowAmount The amount of the underlying asset to borrow
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function borrowFresh(address payable borrower, uint borrowAmount) internal returns (uint) {
        /* Fail if borrow not allowed */
        uint allowed = controller.borrowAllowed(address(this), borrower, borrowAmount);
        if (allowed != 0) {
            return failOpaque(Error.CONTROLLER_REJECTION, FailureInfo.BORROW_CONTROLLER_REJECTION, allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.BORROW_FRESHNESS_CHECK);
        }

        /* Fail gracefully if protocol has insufficient underlying cash */
        if (getCashPrior() < borrowAmount) {
            return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.BORROW_CASH_NOT_AVAILABLE);
        }

        BorrowLocalVars memory vars;

        /*
         * We calculate the new borrower and total borrow balances, failing on overflow:
         *  accountBorrowsNew = accountBorrows + borrowAmount
         *  totalBorrowsNew = totalBorrows + borrowAmount
         */
        (vars.mathErr, vars.accountBorrows) = borrowBalanceStoredInternal(borrower);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.accountBorrowsNew) = addUInt(vars.accountBorrows, borrowAmount);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.totalBorrowsNew) = addUInt(totalBorrows, borrowAmount);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We invoke doTransferOut for the borrower and the borrowAmount.
         *  Note: The aToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the aToken borrowAmount less of cash.
         *  If doTransferOut fails despite the fact we checked pre-conditions,
         *   we revert because we can't be sure if side effects occurred.
         */
        vars.err = doTransferOut(borrower, borrowAmount);
        require(vars.err == Error.NO_ERROR, "borrow transfer out failed");

        /* We write the previously calculated values into storage */
        accountBorrows[borrower].principal = vars.accountBorrowsNew;
        accountBorrows[borrower].interestIndex = borrowIndex;
        totalBorrows = vars.totalBorrowsNew;

        /* We emit a Borrow event */
        emit Borrow(borrower, borrowAmount, vars.accountBorrowsNew, vars.totalBorrowsNew);

        /* We call the defense hook */
        controller.borrowVerify(address(this), borrower, borrowAmount);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Sender repays their own borrow
     * @param repayAmount The amount to repay
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrowInternal(uint repayAmount) internal nonReentrant returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
            return fail(Error(error), FailureInfo.REPAY_BORROW_ACCRUE_INTEREST_FAILED);
        }
        // repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
        return repayBorrowFresh(msg.sender, msg.sender, repayAmount);
    }

    /**
     * @notice Sender repays a borrow belonging to borrower
     * @param borrower the account with the debt being payed off
     * @param repayAmount The amount to repay
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrowBehalfInternal(address borrower, uint repayAmount) internal nonReentrant returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
            return fail(Error(error), FailureInfo.REPAY_BEHALF_ACCRUE_INTEREST_FAILED);
        }
        // repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
        return repayBorrowFresh(msg.sender, borrower, repayAmount);
    }

    struct RepayBorrowLocalVars {
        Error err;
        MathError mathErr;
        uint repayAmount;
        uint borrowerIndex;
        uint accountBorrows;
        uint accountBorrowsNew;
        uint totalBorrowsNew;
    }

    /**
     * @notice Borrows are repaid by another user (possibly the borrower).
     * @param payer the account paying off the borrow
     * @param borrower the account with the debt being payed off
     * @param repayAmount the amount of undelrying tokens being returned
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrowFresh(address payer, address borrower, uint repayAmount) internal returns (uint) {
        /* Fail if repayBorrow not allowed */
        uint allowed = controller.repayBorrowAllowed(address(this), payer, borrower, repayAmount);
        if (allowed != 0) {
            return failOpaque(Error.CONTROLLER_REJECTION, FailureInfo.REPAY_BORROW_CONTROLLER_REJECTION, allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.REPAY_BORROW_FRESHNESS_CHECK);
        }

        RepayBorrowLocalVars memory vars;

        /* We remember the original borrowerIndex for verification purposes */
        vars.borrowerIndex = accountBorrows[borrower].interestIndex;

        /* We fetch the amount the borrower owes, with accumulated interest */
        (vars.mathErr, vars.accountBorrows) = borrowBalanceStoredInternal(borrower);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        /* If repayAmount == -1, repayAmount = accountBorrows */
        if (repayAmount == uint(-1)) {
            vars.repayAmount = vars.accountBorrows;
        } else {
            vars.repayAmount = repayAmount;
        }

        /* Fail if checkTransferIn fails */
        vars.err = checkTransferIn(payer, vars.repayAmount);
        if (vars.err != Error.NO_ERROR) {
            return fail(vars.err, FailureInfo.REPAY_BORROW_TRANSFER_IN_NOT_POSSIBLE);
        }

        /*
         * We calculate the new borrower and total borrow balances, failing on underflow:
         *  accountBorrowsNew = accountBorrows - repayAmount
         *  totalBorrowsNew = totalBorrows - repayAmount
         */
        (vars.mathErr, vars.accountBorrowsNew) = subUInt(vars.accountBorrows, vars.repayAmount);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.totalBorrowsNew) = subUInt(totalBorrows, vars.repayAmount);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We call doTransferIn for the payer and the repayAmount
         *  Note: The aToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the aToken holds an additional repayAmount of cash.
         *  If doTransferIn fails despite the fact we checked pre-conditions,
         *   we revert because we can't be sure if side effects occurred.
         */
        vars.err = doTransferIn(payer, vars.repayAmount);
        require(vars.err == Error.NO_ERROR, "repay borrow transfer in failed");

        /* We write the previously calculated values into storage */
        accountBorrows[borrower].principal = vars.accountBorrowsNew;
        accountBorrows[borrower].interestIndex = borrowIndex;
        totalBorrows = vars.totalBorrowsNew;

        /* We emit a RepayBorrow event */
        emit RepayBorrow(payer, borrower, vars.repayAmount, vars.accountBorrowsNew, vars.totalBorrowsNew);

        /* We call the defense hook */
        controller.repayBorrowVerify(address(this), payer, borrower, vars.repayAmount, vars.borrowerIndex);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice The sender liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this aToken to be liquidated
     * @param aTokenCollateral The market in which to seize collateral from the borrower
     * @param repayAmount The amount of the underlying borrowed asset to repay
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function liquidateBorrowInternal(address borrower, uint repayAmount, AToken aTokenCollateral) internal nonReentrant returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted liquidation failed
            return fail(Error(error), FailureInfo.LIQUIDATE_ACCRUE_BORROW_INTEREST_FAILED);
        }

        error = aTokenCollateral.accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted liquidation failed
            return fail(Error(error), FailureInfo.LIQUIDATE_ACCRUE_COLLATERAL_INTEREST_FAILED);
        }

        // liquidateBorrowFresh emits borrow-specific logs on errors, so we don't need to
        return liquidateBorrowFresh(msg.sender, borrower, repayAmount, aTokenCollateral);
    }

    /**
     * @notice The liquidator liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this aToken to be liquidated
     * @param liquidator The address repaying the borrow and seizing collateral
     * @param aTokenCollateral The market in which to seize collateral from the borrower
     * @param repayAmount The amount of the underlying borrowed asset to repay
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function liquidateBorrowFresh(address liquidator, address borrower, uint repayAmount, AToken aTokenCollateral) internal returns (uint) {
        /* Fail if liquidate not allowed */
        uint allowed = controller.liquidateBorrowAllowed(address(this), address(aTokenCollateral), liquidator, borrower, repayAmount);
        if (allowed != 0) {
            return failOpaque(Error.CONTROLLER_REJECTION, FailureInfo.LIQUIDATE_CONTROLLER_REJECTION, allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.LIQUIDATE_FRESHNESS_CHECK);
        }

        /* Verify aTokenCollateral market's block number equals current block number */
        if (aTokenCollateral.accrualBlockNumber() != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.LIQUIDATE_COLLATERAL_FRESHNESS_CHECK);
        }

        /* Fail if borrower = liquidator */
        if (borrower == liquidator) {
            return fail(Error.INVALID_ACCOUNT_PAIR, FailureInfo.LIQUIDATE_LIQUIDATOR_IS_BORROWER);
        }

        /* Fail if repayAmount = 0 */
        if (repayAmount == 0) {
            return fail(Error.INVALID_CLOSE_AMOUNT_REQUESTED, FailureInfo.LIQUIDATE_CLOSE_AMOUNT_IS_ZERO);
        }

        /* Fail if repayAmount = -1 */
        if (repayAmount == uint(-1)) {
            return fail(Error.INVALID_CLOSE_AMOUNT_REQUESTED, FailureInfo.LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX);
        }

        /* We calculate the number of collateral tokens that will be seized */
        (uint amountSeizeError, uint seizeTokens) = controller.liquidateCalculateSeizeTokens(address(this), address(aTokenCollateral), repayAmount);
        if (amountSeizeError != 0) {
            return failOpaque(Error.CONTROLLER_CALCULATION_ERROR, FailureInfo.LIQUIDATE_CONTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED, amountSeizeError);
        }

        /* Fail if seizeTokens > borrower collateral token balance */
        if (seizeTokens > aTokenCollateral.balanceOf(borrower)) {
            return fail(Error.TOKEN_INSUFFICIENT_BALANCE, FailureInfo.LIQUIDATE_SEIZE_TOO_MUCH);
        }

        /* Fail if repayBorrow fails */
        uint repayBorrowError = repayBorrowFresh(liquidator, borrower, repayAmount);
        if (repayBorrowError != uint(Error.NO_ERROR)) {
            return fail(Error(repayBorrowError), FailureInfo.LIQUIDATE_REPAY_BORROW_FRESH_FAILED);
        }

        /* Revert if seize tokens fails (since we cannot be sure of side effects) */
        uint seizeError = aTokenCollateral.seize(liquidator, borrower, seizeTokens);
        require(seizeError == uint(Error.NO_ERROR), "token seizure failed");

        /* We emit a LiquidateBorrow event */
        emit LiquidateBorrow(liquidator, borrower, repayAmount, address(aTokenCollateral), seizeTokens);

        /* We call the defense hook */
        controller.liquidateBorrowVerify(address(this), address(aTokenCollateral), liquidator, borrower, repayAmount, seizeTokens);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Transfers collateral tokens (this market) to the liquidator.
     * @dev Will fail unless called by another aToken during the process of liquidation.
     *  Its absolutely critical to use msg.sender as the borrowed aToken and not a parameter.
     * @param liquidator The account receiving seized collateral
     * @param borrower The account having collateral seized
     * @param seizeTokens The number of aTokens to seize
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function seize(address liquidator, address borrower, uint seizeTokens) external nonReentrant returns (uint) {
        /* Fail if seize not allowed */
        uint allowed = controller.seizeAllowed(address(this), msg.sender, liquidator, borrower, seizeTokens);
        if (allowed != 0) {
            return failOpaque(Error.CONTROLLER_REJECTION, FailureInfo.LIQUIDATE_SEIZE_CONTROLLER_REJECTION, allowed);
        }

        /* Fail if borrower = liquidator */
        if (borrower == liquidator) {
            return fail(Error.INVALID_ACCOUNT_PAIR, FailureInfo.LIQUIDATE_SEIZE_LIQUIDATOR_IS_BORROWER);
        }

        MathError mathErr;
        uint borrowerTokensNew;
        uint liquidatorTokensNew;

        /*
         * We calculate the new borrower and liquidator token balances, failing on underflow/overflow:
         *  borrowerTokensNew = accountTokens[borrower] - seizeTokens
         *  liquidatorTokensNew = accountTokens[liquidator] + seizeTokens
         */
        (mathErr, borrowerTokensNew) = subUInt(accountTokens[borrower], seizeTokens);
        if (mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.LIQUIDATE_SEIZE_BALANCE_DECREMENT_FAILED, uint(mathErr));
        }

        (mathErr, liquidatorTokensNew) = addUInt(accountTokens[liquidator], seizeTokens);
        if (mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.LIQUIDATE_SEIZE_BALANCE_INCREMENT_FAILED, uint(mathErr));
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We write the previously calculated values into storage */
        accountTokens[borrower] = borrowerTokensNew;
        accountTokens[liquidator] = liquidatorTokensNew;

        /* Emit a Transfer event */
        emit Transfer(borrower, liquidator, seizeTokens);

        /* We call the defense hook */
        controller.seizeVerify(address(this), msg.sender, liquidator, borrower, seizeTokens);

        return uint(Error.NO_ERROR);
    }


    /*** Admin Functions ***/

    /**
      * @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @param newPendingAdmin New pending admin.
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      *
      * TODO: Should we add a second arg to verify, like a checksum of `newAdmin` address?
      */
    function _setPendingAdmin(address payable newPendingAdmin) external returns (uint) {
        // Check caller = admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_ADMIN_OWNER_CHECK);
        }

        // Save current value, if any, for inclusion in log
        address oldPendingAdmin = pendingAdmin;

        // Store pendingAdmin with value newPendingAdmin
        pendingAdmin = newPendingAdmin;

        // Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
        emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
      * @dev Admin function for pending admin to accept role and update admin
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _acceptAdmin() external returns (uint) {
        // Check caller is pendingAdmin and pendingAdmin ≠ address(0)
        if (msg.sender != pendingAdmin || msg.sender == address(0)) {
            return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_ADMIN_PENDING_ADMIN_CHECK);
        }

        // Save current values for inclusion in log
        address oldAdmin = admin;
        address oldPendingAdmin = pendingAdmin;

        // Store admin with value pendingAdmin
        admin = pendingAdmin;

        // Clear the pending value
        pendingAdmin = address(0);

        emit NewAdmin(oldAdmin, admin);
        emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Sets a new controller for the market
      * @dev Admin function to set a new controller
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setController(ControllerInterface newController) public returns (uint) {
        // Check caller is admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_CONTROLLER_OWNER_CHECK);
        }

        ControllerInterface oldController = controller;
        
        // Ensure invoke controller.isController() returns true
        require(newController.isController(), "marker method returned false");

        // Set market's controller to newController
        controller = newController;

        // Emit NewControllerr(oldController, newController)
        emit NewController(oldController, newController);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice accrues interest and sets a new reserve factor for the protocol using _setReserveFactorFresh
      * @dev Admin function to accrue interest and set a new reserve factor
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setReserveFactor(uint newReserveFactorMantissa) external nonReentrant returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted reserve factor change failed.
            return fail(Error(error), FailureInfo.SET_RESERVE_FACTOR_ACCRUE_INTEREST_FAILED);
        }
        // _setReserveFactorFresh emits reserve-factor-specific logs on errors, so we don't need to.
        return _setReserveFactorFresh(newReserveFactorMantissa);
    }

    /**
      * @notice Sets a new reserve factor for the protocol (*requires fresh interest accrual)
      * @dev Admin function to set a new reserve factor
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setReserveFactorFresh(uint newReserveFactorMantissa) internal returns (uint) {
        // Check caller is admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_RESERVE_FACTOR_ADMIN_CHECK);
        }

        // Verify market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            // TODO: static_assert + no error code?
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_RESERVE_FACTOR_FRESH_CHECK);
        }

        // Check newReserveFactor ≤ maxReserveFactor
        if (newReserveFactorMantissa > reserveFactorMaxMantissa) {
            return fail(Error.BAD_INPUT, FailureInfo.SET_RESERVE_FACTOR_BOUNDS_CHECK);
        }

        uint oldReserveFactorMantissa = reserveFactorMantissa;
        reserveFactorMantissa = newReserveFactorMantissa;

        emit NewReserveFactor(oldReserveFactorMantissa, newReserveFactorMantissa);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Accrues interest and reduces reserves by transferring to admin
     * @param reduceAmount Amount of reduction to reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _reduceReserves(uint reduceAmount) external nonReentrant returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted reduce reserves failed.
            return fail(Error(error), FailureInfo.REDUCE_RESERVES_ACCRUE_INTEREST_FAILED);
        }
        // _reduceReservesFresh emits reserve-reduction-specific logs on errors, so we don't need to.
        return _reduceReservesFresh(reduceAmount);
    }

    /**
     * @notice Reduces reserves by transferring to admin
     * @dev Requires fresh interest accrual
     * @param reduceAmount Amount of reduction to reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _reduceReservesFresh(uint reduceAmount) internal returns (uint) {
        Error err;
        // totalReserves - reduceAmount
        uint totalReservesNew;

        // Check caller is admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.REDUCE_RESERVES_ADMIN_CHECK);
        }

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            // TODO: static_assert + no error code?
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.REDUCE_RESERVES_FRESH_CHECK);
        }

        // Fail gracefully if protocol has insufficient underlying cash
        if (getCashPrior() < reduceAmount) {
            return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.REDUCE_RESERVES_CASH_NOT_AVAILABLE);
        }

        // Check reduceAmount ≤ reserves[n] (totalReserves)
        // TODO: I'm following the spec literally here but I think we should we just use SafeMath instead and fail on an error (which would be underflow)
        if (reduceAmount > totalReserves) {
            return fail(Error.BAD_INPUT, FailureInfo.REDUCE_RESERVES_VALIDATION);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        totalReservesNew = totalReserves - reduceAmount;
        // We checked reduceAmount <= totalReserves above, so this should never revert.
        require(totalReservesNew <= totalReserves, "reduce reserves unexpected underflow");

        // Store reserves[n+1] = reserves[n] - reduceAmount
        totalReserves = totalReservesNew;

        // invoke doTransferOut(reduceAmount, admin)
        err = doTransferOut(admin, reduceAmount);
        // we revert on the failure of this command
        require(err == Error.NO_ERROR, "reduce reserves transfer out failed");

        emit ReservesReduced(admin, reduceAmount, totalReservesNew);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice accrues interest and updates the interest rate model using _setInterestRateModelFresh
     * @dev Admin function to accrue interest and update the interest rate model
     * @param newInterestRateModel the new interest rate model to use
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted change of interest rate model failed
            return fail(Error(error), FailureInfo.SET_INTEREST_RATE_MODEL_ACCRUE_INTEREST_FAILED);
        }
        // _setInterestRateModelFresh emits interest-rate-model-update-specific logs on errors, so we don't need to.
        return _setInterestRateModelFresh(newInterestRateModel);
    }

    function _setInterestRateModel_init(InterestRateModel newInterestRateModel) public returns (uint) {
        if (msg.sender != admin) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_INTEREST_RATE_MODEL_FRESH_CHECK);
        }
        // _setInterestRateModelFresh emits interest-rate-model-update-specific logs on errors, so we don't need to.
        interestRateModel = newInterestRateModel;
        _setInterestRateModelFresh(interestRateModel);
    }
    
    /**
     * @notice updates the interest rate model (*requires fresh interest accrual)
     * @dev Admin function to update the interest rate model
     * @param newInterestRateModel the new interest rate model to use
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setInterestRateModelFresh(InterestRateModel newInterestRateModel) internal returns (uint) {

        // Used to store old model for use in the event that is emitted on success
        InterestRateModel oldInterestRateModel;

        // Check caller is admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_INTEREST_RATE_MODEL_OWNER_CHECK);
        }

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            // TODO: static_assert + no error code?
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_INTEREST_RATE_MODEL_FRESH_CHECK);
        }

        // Track the market's current interest rate model
        oldInterestRateModel = interestRateModel;

        // Ensure invoke newInterestRateModel.isInterestRateModel() returns true
        require(newInterestRateModel.isInterestRateModel(), "marker method returned false");

        // Set the interest rate model to newInterestRateModel
        interestRateModel = newInterestRateModel;

        // Emit NewMarketInterestRateModel(oldInterestRateModel, newInterestRateModel)
        emit NewMarketInterestRateModel(oldInterestRateModel, newInterestRateModel);

        return uint(Error.NO_ERROR);
    }

    
    /*** Safe Token ***/

    /**
     * @notice Gets balance of this contract in terms of the underlying
     * @dev This excludes the value of the current message, if any
     * @return The quantity of underlying owned by this contract
     */
    function getCashPrior() internal view returns (uint);

    /**
     * @dev Checks whether or not there is sufficient allowance for this contract to move amount from `from` and
     *      whether or not `from` has a balance of at least `amount`. Does NOT do a transfer.
     */
    function checkTransferIn(address from, uint amount) internal view returns (Error);

    /**
     * @dev Performs a transfer in, ideally returning an explanatory error code upon failure rather than reverting.
     *  If caller has not called `checkTransferIn`, this may revert due to insufficient balance or insufficient allowance.
     *  If caller has called `checkTransferIn` successfully, this should not revert in normal conditions.
     */
    function doTransferIn(address from, uint amount) internal returns (Error);

    /**
     * @dev Performs a transfer out, ideally returning an explanatory error code upon failure tather than reverting.
     *  If caller has not called checked protocol's balance, may revert due to insufficient cash held in the contract.
     *  If caller has checked protocol's balance, and verified it is >= amount, this should not revert in normal conditions.
     */
    function doTransferOut(address payable to, uint amount) internal returns (Error);
}



contract AErc20 is AToken {

    /**
     * @notice Underlying asset for this AToken
     */
    address public underlying;

    /*** User Interface ***/

    /**
     * @notice Sender supplies assets into the market and receives aTokens in exchange
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param mintAmount The amount of the underlying asset to supply
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function mint(uint mintAmount) external returns (uint) {
        return mintInternal(mintAmount);
    }

    /**
     * @notice Sender redeems aTokens in exchange for the underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemTokens The number of aTokens to redeem into underlying
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeem(uint redeemTokens) external returns (uint) {
        return redeemInternal(redeemTokens);
    }

    /**
     * @notice Sender redeems aTokens in exchange for a specified amount of underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemAmount The amount of underlying to redeem
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemUnderlying(uint redeemAmount) external returns (uint) {
        return redeemUnderlyingInternal(redeemAmount);
    }

    /**
      * @notice Sender borrows assets from the protocol to their own address
      * @param borrowAmount The amount of the underlying asset to borrow
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function borrow(uint borrowAmount) external returns (uint) {
        return borrowInternal(borrowAmount);
    }

    /**
     * @notice Sender repays their own borrow
     * @param repayAmount The amount to repay
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrow(uint repayAmount) external returns (uint) {
        return repayBorrowInternal(repayAmount);
    }

    /**
     * @notice Sender repays a borrow belonging to borrower
     * @param borrower the account with the debt being payed off
     * @param repayAmount The amount to repay
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint) {
        return repayBorrowBehalfInternal(borrower, repayAmount);
    }

    /**
     * @notice The sender liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this aToken to be liquidated
     * @param aTokenCollateral The market in which to seize collateral from the borrower
     * @param repayAmount The amount of the underlying borrowed asset to repay
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function liquidateBorrow(address borrower, uint repayAmount, AToken aTokenCollateral) external returns (uint) {
        return liquidateBorrowInternal(borrower, repayAmount, aTokenCollateral);
    }

    /*** Safe Token ***/

    /**
     * @notice Gets balance of this contract in terms of the underlying
     * @dev This excludes the value of the current message, if any
     * @return The quantity of underlying tokens owned by this contract
     */
    function getCashPrior() internal view returns (uint) {
        EIP20Interface token = EIP20Interface(underlying);
        return token.balanceOf(address(this));
    }

    /**
     * @dev Checks whether or not there is sufficient allowance for this contract to move amount from `from` and
     *      whether or not `from` has a balance of at least `amount`. Does NOT do a transfer.
     */
    function checkTransferIn(address from, uint amount) internal view returns (Error) {
        EIP20Interface token = EIP20Interface(underlying);

        if (token.allowance(from, address(this)) < amount) {
            return Error.TOKEN_INSUFFICIENT_ALLOWANCE;
        }

        if (token.balanceOf(from) < amount) {
            return Error.TOKEN_INSUFFICIENT_BALANCE;
        }

        return Error.NO_ERROR;
    }

    /**
     * @dev Similar to EIP20 transfer, except it handles a False result from `transferFrom` and returns an explanatory
     *      error code rather than reverting.  If caller has not called `checkTransferIn`, this may revert due to
     *      insufficient balance or insufficient allowance. If caller has called `checkTransferIn` prior to this call,
     *      and it returned Error.NO_ERROR, this should not revert in normal conditions.
     *
     *      Note: This wrapper safely handles non-standard ERC-20 tokens that do not return a value.
     *            See here: https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
     */
    function doTransferIn(address from, uint amount) internal returns (Error) {
        EIP20NonStandardInterface token = EIP20NonStandardInterface(underlying);
        bool result;

        token.transferFrom(from, address(this), amount);

        // solium-disable-next-line security/no-inline-assembly
        assembly {
            switch returndatasize()
                case 0 {                      // This is a non-standard ERC-20
                    result := not(0)          // set result to true
                }
                case 32 {                     // This is a complaint ERC-20
                    returndatacopy(0, 0, 32)
                    result := mload(0)        // Set `result = returndata` of external call
                }
                default {                     // This is an excessively non-compliant ERC-20, revert.
                    revert(0, 0)
                }
        }

        if (!result) {
            return Error.TOKEN_TRANSFER_IN_FAILED;
        }

        return Error.NO_ERROR;
    }

    /**
     * @dev Similar to EIP20 transfer, except it handles a False result from `transfer` and returns an explanatory
     *      error code rather than reverting. If caller has not called checked protocol's balance, this may revert due to
     *      insufficient cash held in this contract. If caller has checked protocol's balance prior to this call, and verified
     *      it is >= amount, this should not revert in normal conditions.
     *
     *      Note: This wrapper safely handles non-standard ERC-20 tokens that do not return a value.
     *            See here: https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
     */
    function doTransferOut(address payable to, uint amount) internal returns (Error) {
        EIP20NonStandardInterface token = EIP20NonStandardInterface(underlying);
        bool result;

        token.transfer(to, amount);

        // solium-disable-next-line security/no-inline-assembly
        assembly {
            switch returndatasize()
                case 0 {                      // This is a non-standard ERC-20
                    result := not(0)          // set result to true
                }
                case 32 {                     // This is a complaint ERC-20
                    returndatacopy(0, 0, 32)
                    result := mload(0)        // Set `result = returndata` of external call
                }
                default {                     // This is an excessively non-compliant ERC-20, revert.
                    revert(0, 0)
                }
        }

        if (!result) {
            return Error.TOKEN_TRANSFER_OUT_FAILED;
        }

        return Error.NO_ERROR;
    }
    
    function _setUnderlying(address newunderlying) public returns (uint) {
        // Check caller is admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_CONTROLLER_OWNER_CHECK);
        }

        // Set market's controller to newController
        underlying = newunderlying;
        EIP20Interface(underlying).totalSupply(); // Sanity check the underlying
        
        return uint(Error.NO_ERROR);
    } 
}

{
  "compilationTarget": {
    "AErc20.sol": "AErc20"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}