// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts@4.7.3/utils/Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
  */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts@4.7.3/access/Ownable.sol


// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
  */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
      * @dev Initializes the contract setting the deployer as the initial owner.
      */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
      * @dev Throws if called by any account other than the owner.
      */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
      * @dev Returns the address of the current owner.
      */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
      * @dev Throws if the sender is not the owner.
      */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
      * @dev Leaves the contract without owner. It will not be possible to call
    * `onlyOwner` functions anymore. Can only be called by the current owner.
    *
    * NOTE: Renouncing ownership will leave the contract without an owner,
    * thereby removing any functionality that is only available to the owner.
      */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
      * @dev Transfers ownership of the contract to a new account (`newOwner`).
    * Can only be called by the current owner.
      */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
      * @dev Transfers ownership of the contract to a new account (`newOwner`).
    * Internal function without access restriction.
      */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin/contracts@4.7.3/token/ERC20/IERC20.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
* @dev Interface of the ERC20 standard as defined in the EIP.
  */
interface IERC20 {
    /**
      * @dev Emitted when `value` tokens are moved from one account (`from`) to
    * another (`to`).
    *
    * Note that `value` may be zero.
      */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
      * @dev Emitted when the allowance of a `spender` for an `owner` is set by
    * a call to {approve}. `value` is the new allowance.
      */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
      * @dev Returns the amount of tokens in existence.
      */
    function totalSupply() external view returns (uint256);

    /**
      * @dev Returns the amount of tokens owned by `account`.
      */
    function balanceOf(address account) external view returns (uint256);

    /**
      * @dev Moves `amount` tokens from the caller's account to `to`.
    *
    * Returns a boolean value indicating whether the operation succeeded.
    *
    * Emits a {Transfer} event.
      */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
      * @dev Returns the remaining number of tokens that `spender` will be
    * allowed to spend on behalf of `owner` through {transferFrom}. This is
    * zero by default.
    *
    * This value changes when {approve} or {transferFrom} are called.
      */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
      * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
    *
    * Returns a boolean value indicating whether the operation succeeded.
    *
    * IMPORTANT: Beware that changing an allowance with this method brings the risk
    * that someone may use both the old and the new allowance by unfortunate
    * transaction ordering. One possible solution to mitigate this race
    * condition is to first reduce the spender's allowance to 0 and set the
    * desired value afterwards:
    * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
    *
    * Emits an {Approval} event.
      */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
      * @dev Moves `amount` tokens from `from` to `to` using the
    * allowance mechanism. `amount` is then deducted from the caller's
    * allowance.
    *
    * Returns a boolean value indicating whether the operation succeeded.
    *
    * Emits a {Transfer} event.
      */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// File: @openzeppelin/contracts@4.7.3/token/ERC20/extensions/IERC20Metadata.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;


/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
  */
interface IERC20Metadata is IERC20 {
    /**
      * @dev Returns the name of the token.
      */
    function name() external view returns (string memory);

    /**
      * @dev Returns the symbol of the token.
      */
    function symbol() external view returns (string memory);

    /**
      * @dev Returns the decimals places of the token.
      */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts@4.7.3/token/ERC20/ERC20.sol


// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;




/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
  */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
      * @dev Sets the values for {name} and {symbol}.
    *
    * The default value of {decimals} is 18. To select a different value for
    * {decimals} you should overload it.
    *
    * All two of these values are immutable: they can only be set once during
    * construction.
      */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
      * @dev Returns the name of the token.
      */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
      * @dev Returns the symbol of the token, usually a shorter version of the
    * name.
      */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
      * @dev Returns the number of decimals used to get its user representation.
    * For example, if `decimals` equals `2`, a balance of `505` tokens should
    * be displayed to a user as `5.05` (`505 / 10 ** 2`).
    *
    * Tokens usually opt for a value of 18, imitating the relationship between
    * Ether and Wei. This is the value {ERC20} uses, unless this function is
    * overridden;
    *
    * NOTE: This information is only used for _display_ purposes: it in
    * no way affects any of the arithmetic of the contract, including
    * {IERC20-balanceOf} and {IERC20-transfer}.
      */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
      * @dev See {IERC20-totalSupply}.
      */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
      * @dev See {IERC20-balanceOf}.
      */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
      * @dev See {IERC20-transfer}.
    *
    * Requirements:
    *
    * - `to` cannot be the zero address.
    * - the caller must have a balance of at least `amount`.
        */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
      * @dev See {IERC20-allowance}.
      */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
      * @dev See {IERC20-approve}.
    *
    * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
    * `transferFrom`. This is semantically equivalent to an infinite approval.
    *
    * Requirements:
    *
    * - `spender` cannot be the zero address.
        */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
      * @dev See {IERC20-transferFrom}.
    *
    * Emits an {Approval} event indicating the updated allowance. This is not
    * required by the EIP. See the note at the beginning of {ERC20}.
    *
    * NOTE: Does not update the allowance if the current allowance
    * is the maximum `uint256`.
    *
    * Requirements:
    *
    * - `from` and `to` cannot be the zero address.
    * - `from` must have a balance of at least `amount`.
    * - the caller must have allowance for ``from``'s tokens of at least
    * `amount`.
      */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
      * @dev Atomically increases the allowance granted to `spender` by the caller.
    *
    * This is an alternative to {approve} that can be used as a mitigation for
    * problems described in {IERC20-approve}.
    *
    * Emits an {Approval} event indicating the updated allowance.
    *
    * Requirements:
    *
    * - `spender` cannot be the zero address.
        */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
      * @dev Atomically decreases the allowance granted to `spender` by the caller.
    *
    * This is an alternative to {approve} that can be used as a mitigation for
    * problems described in {IERC20-approve}.
    *
    * Emits an {Approval} event indicating the updated allowance.
    *
    * Requirements:
    *
    * - `spender` cannot be the zero address.
    * - `spender` must have allowance for the caller of at least
    * `subtractedValue`.
      */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
    unchecked {
        _approve(owner, spender, currentAllowance - subtractedValue);
    }

        return true;
    }

    /**
      * @dev Moves `amount` of tokens from `from` to `to`.
    *
    * This internal function is equivalent to {transfer}, and can be used to
    * e.g. implement automatic token fees, slashing mechanisms, etc.
    *
    * Emits a {Transfer} event.
    *
    * Requirements:
    *
    * - `from` cannot be the zero address.
    * - `to` cannot be the zero address.
    * - `from` must have a balance of at least `amount`.
        */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
    unchecked {
        _balances[from] = fromBalance - amount;
    }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
    * the total supply.
    *
    * Emits a {Transfer} event with `from` set to the zero address.
    *
    * Requirements:
    *
    * - `account` cannot be the zero address.
        */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
      * @dev Destroys `amount` tokens from `account`, reducing the
    * total supply.
    *
    * Emits a {Transfer} event with `to` set to the zero address.
    *
    * Requirements:
    *
    * - `account` cannot be the zero address.
    * - `account` must have at least `amount` tokens.
        */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
    unchecked {
        _balances[account] = accountBalance - amount;
    }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
      * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
    *
    * This internal function is equivalent to `approve`, and can be used to
    * e.g. set automatic allowances for certain subsystems, etc.
    *
    * Emits an {Approval} event.
    *
    * Requirements:
    *
    * - `owner` cannot be the zero address.
    * - `spender` cannot be the zero address.
        */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
      * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
    *
    * Does not update the allowance amount in case of infinite allowance.
    * Revert if not enough allowance is available.
    *
    * Might emit an {Approval} event.
      */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
        unchecked {
            _approve(owner, spender, currentAllowance - amount);
        }
        }
    }

    /**
      * @dev Hook that is called before any transfer of tokens. This includes
    * minting and burning.
    *
    * Calling conditions:
    *
    * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
    * will be transferred to `to`.
    * - when `from` is zero, `amount` tokens will be minted for `to`.
    * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
    * - `from` and `to` are never both zero.
    *
    * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
      */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
      * @dev Hook that is called after any transfer of tokens. This includes
    * minting and burning.
    *
    * Calling conditions:
    *
    * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
    * has been transferred to `to`.
    * - when `from` is zero, `amount` tokens have been minted for `to`.
    * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
    * - `from` and `to` are never both zero.
    *
    * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
      */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// File: @openzeppelin/contracts@4.7.3/token/ERC20/extensions/ERC20Burnable.sol


// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)

pragma solidity ^0.8.0;



/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
  */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
      * @dev Destroys `amount` tokens from the caller.
    *
    * See {ERC20-_burn}.
      */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
      * @dev Destroys `amount` tokens from `account`, deducting from the caller's
    * allowance.
    *
    * See {ERC20-_burn} and {ERC20-allowance}.
    *
    * Requirements:
    *
    * - the caller must have allowance for ``accounts``'s tokens of at least
    * `amount`.
      */
    function burnFrom(address account, uint256 amount) public virtual {
        _spendAllowance(account, _msgSender(), amount);
        _burn(account, amount);
    }
}

// File: contract-a54d4aa65a.sol


pragma solidity ^0.8.0;




contract YouYue is ERC20, ERC20Burnable, Ownable {
    constructor() ERC20("You Yue", "YB") {
        _mint(msg.sender, 210000000 * 10 ** decimals());
    }

    function mint(address to, uint256 amount) public onlyOwner {
        _mint(to, amount);
    }
}

{
  "compilationTarget": {
    "YouYue.sol": "YouYue"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}