// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }

    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }

    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./IERC721Metadata.sol";
import "./Address.sol";
import "./Context.sol";
import "./Strings.sol";
import "./ERC165.sol";

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _owners[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overriden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "https://ipfs.io/ipfs/QmX5yN7YR2RBQRD6cbkk5v8Ut7fZ8ZZYXNgcf1Gb25jAAo?filename=MetaData.json";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(operator != _msgSender(), "ERC721: approve to caller");

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _owners[tokenId] != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(
        address to,
        uint256 tokenId,
        bytes memory _data
    ) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, _data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        _balances[owner] -= 1;
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _balances[from] -= 1;
        _balances[to] += 1;
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits a {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 tokenId
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./EnumerableSet.sol";

/**
 * @dev Library for managing an enumerable variant of Solidity's
 * https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
 * type.
 *
 * Maps have the following properties:
 *
 * - Entries are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Entries are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableMap for EnumerableMap.UintToAddressMap;
 *
 *     // Declare a set state variable
 *     EnumerableMap.UintToAddressMap private myMap;
 * }
 * ```
 *
 * As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
 * supported.
 */
library EnumerableMap {
    using EnumerableSet for EnumerableSet.Bytes32Set;

    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Map type with
    // bytes32 keys and values.
    // The Map implementation uses private functions, and user-facing
    // implementations (such as Uint256ToAddressMap) are just wrappers around
    // the underlying Map.
    // This means that we can only create new EnumerableMaps for types that fit
    // in bytes32.

    struct Map {
        // Storage of keys
        EnumerableSet.Bytes32Set _keys;
        mapping(bytes32 => bytes32) _values;
    }

    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function _set(
        Map storage map,
        bytes32 key,
        bytes32 value
    ) private returns (bool) {
        map._values[key] = value;
        return map._keys.add(key);
    }

    /**
     * @dev Removes a key-value pair from a map. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function _remove(Map storage map, bytes32 key) private returns (bool) {
        delete map._values[key];
        return map._keys.remove(key);
    }

    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function _contains(Map storage map, bytes32 key) private view returns (bool) {
        return map._keys.contains(key);
    }

    /**
     * @dev Returns the number of key-value pairs in the map. O(1).
     */
    function _length(Map storage map) private view returns (uint256) {
        return map._keys.length();
    }

    /**
     * @dev Returns the key-value pair stored at position `index` in the map. O(1).
     *
     * Note that there are no guarantees on the ordering of entries inside the
     * array, and it may change when more entries are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
        bytes32 key = map._keys.at(index);
        return (key, map._values[key]);
    }

    /**
     * @dev Tries to returns the value associated with `key`.  O(1).
     * Does not revert if `key` is not in the map.
     */
    function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) {
        bytes32 value = map._values[key];
        if (value == bytes32(0)) {
            return (_contains(map, key), bytes32(0));
        } else {
            return (true, value);
        }
    }

    /**
     * @dev Returns the value associated with `key`.  O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function _get(Map storage map, bytes32 key) private view returns (bytes32) {
        bytes32 value = map._values[key];
        require(value != 0 || _contains(map, key), "EnumerableMap: nonexistent key");
        return value;
    }

    /**
     * @dev Same as {_get}, with a custom error message when `key` is not in the map.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {_tryGet}.
     */
    function _get(
        Map storage map,
        bytes32 key,
        string memory errorMessage
    ) private view returns (bytes32) {
        bytes32 value = map._values[key];
        require(value != 0 || _contains(map, key), errorMessage);
        return value;
    }

    // UintToAddressMap

    struct UintToAddressMap {
        Map _inner;
    }

    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function set(
        UintToAddressMap storage map,
        uint256 key,
        address value
    ) internal returns (bool) {
        return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
        return _remove(map._inner, bytes32(key));
    }

    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
        return _contains(map._inner, bytes32(key));
    }

    /**
     * @dev Returns the number of elements in the map. O(1).
     */
    function length(UintToAddressMap storage map) internal view returns (uint256) {
        return _length(map._inner);
    }

    /**
     * @dev Returns the element stored at position `index` in the set. O(1).
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
        (bytes32 key, bytes32 value) = _at(map._inner, index);
        return (uint256(key), address(uint160(uint256(value))));
    }

    /**
     * @dev Tries to returns the value associated with `key`.  O(1).
     * Does not revert if `key` is not in the map.
     *
     * _Available since v3.4._
     */
    function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
        (bool success, bytes32 value) = _tryGet(map._inner, bytes32(key));
        return (success, address(uint160(uint256(value))));
    }

    /**
     * @dev Returns the value associated with `key`.  O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
        return address(uint160(uint256(_get(map._inner, bytes32(key)))));
    }

    /**
     * @dev Same as {get}, with a custom error message when `key` is not in the map.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryGet}.
     */
    function get(
        UintToAddressMap storage map,
        uint256 key,
        string memory errorMessage
    ) internal view returns (address) {
        return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage))));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastvalue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastvalue;
                // Update the index for the moved value
                set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {
    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.7;

import "./ERC721.sol";
import "./Ownable.sol";
import "./Address.sol";
import "./SafeMath.sol";
import "./Counters.sol";
import "./PaymentSplitter.sol";

contract MoonBoyz is ERC721, Ownable, PaymentSplitter {
    using SafeMath for uint256;
    using Counters for Counters.Counter;
    using Address for address;
    
    // Optional mapping for token URIs
    mapping (uint256 => string) private _tokenURIs;

    // Base URI
    string private _baseURIextended;
    
    Counters.Counter private _tokenIdCounter;
    
    uint256 public constant maxMoonBoyzSupply = 11111;
    bool public whiteListSale = false;
    bool public regularSale = false;
    uint256 public salePrice;
    
    mapping(address => uint256) public totalAvailableForUser;
    
    address[] public whiteListOne;
    address[] public whiteListTwo;
    address[] public whiteListThree;
    address[] public whiteListFour;
    address[] public whiteListFive;
    address[] public whiteListSix;
    address[] public whiteListSeven;
    address[] public whiteListEight;
    address[] public whiteListNine;
    address[] public whiteListTen;
    address[] public whiteListEleven;
    
    
    address payable thisContract;
    
    
    address[] private _team = [
        0x700eec4D6Ed56ED0F97a0f43Fc9DF5B426Ba25Fc, 
        0xDFf1889Ec0F09d14dE9379938bDc3Df0c6D0B39C, 
        0x4c2a5a4ea0d3f7E9142535f260A05b975Ee1df02, 
        0xDbe3BfBEc8332b0835bf0f466bA34c64655Ba94D, 
        0x12B285072b1Ffc70F367f08066b0D9A7d3337309 
        ];
    
    uint256[] private _teamShares = [
        23,
        22,
        23,
        22,
        10
        ];
    
    constructor() ERC721("MoonBoyz", "MOONBOYZ") PaymentSplitter(_team, _teamShares) {
    }
    
    fallback() external payable {

  	}
  	
  	function setBaseURI(string memory baseURI_) external onlyOwner() {
            _baseURIextended = baseURI_;
    }
    
    function _baseURI() internal view virtual override returns (string memory) {
            return _baseURIextended;
    }

    function setThisContract(address payable _thisContract) external onlyOwner {
        thisContract = _thisContract;
    }
    
    function populateWhiteListOne(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListOne.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }
    }
    
    function populateWhiteListTwo(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListTwo.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }   
    }
    
    function populateWhiteListThree(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListThree.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }
    }
    
    function populateWhiteListFour(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListFour.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }   
    }
    
    function populateWhiteListFive(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListFive.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }
    }
    
    function populateWhiteListSix(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListSix.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }   
    }
    
    function populateWhiteListSeven(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListSeven.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }
    }
    
    function populateWhiteListEight(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListEight.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }   
    }
    
    function populateWhiteListNine(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListNine.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }
    }
    
    function populateWhiteListTen(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListTen.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }   
    }
    
    function populateWhiteListEleven(address[] memory _users) external onlyOwner {
        for(uint256 i = 0; i < _users.length; i++) {
            whiteListEleven.push(_users[i]);
            totalAvailableForUser[_users[i]] = totalAvailableForUser[_users[i]] + 2;
        }
    }
    
    function whitelistOwners(address _owners) public onlyOwner {
        whiteListOne.push(_owners);
        whiteListTwo.push(_owners);
        whiteListThree.push(_owners);
        whiteListFour.push(_owners);
        whiteListFive.push(_owners);
        whiteListSix.push(_owners);
        whiteListSeven.push(_owners);
        whiteListEight.push(_owners);
        whiteListNine.push(_owners);
        whiteListTen.push(_owners);
        whiteListEleven.push(_owners);
        totalAvailableForUser[_owners] = 299;
    }
    
    function viewWhitelistOneStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListOne.length; i++) {
            if(whiteListOne[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistTwoStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListTwo.length; i++) {
            if(whiteListTwo[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistThreeStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListThree.length; i++) {
            if(whiteListThree[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistFourStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListFour.length; i++) {
            if(whiteListFour[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistFiveStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListFive.length; i++) {
            if(whiteListFive[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistSixStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListSix.length; i++) {
            if(whiteListSix[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistSevenStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListSeven.length; i++) {
            if(whiteListSeven[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistEightStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListEight.length; i++) {
            if(whiteListEight[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistNineStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListNine.length; i++) {
            if(whiteListNine[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistTenStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListTen.length; i++) {
            if(whiteListTen[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function viewWhitelistElevenStatus(address _user) public view returns(bool) {
        for(uint256 i = 0; i < whiteListEleven.length; i++) {
            if(whiteListEleven[i] == _user) {
                return true;
            }
        }
        return false;
    }
    
    function whiteListGroupOne() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistOneStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupTwo() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistTwoStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupThree() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistThreeStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupFour() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistFourStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupFive() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistFiveStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupSix() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistSixStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupSeven() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistSevenStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupEight() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistEightStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupNine() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistNineStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupTen() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistTenStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function whiteListGroupEleven() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(whiteListSale == true, "Whitelisted Sale Not Active");
        uint256 _tokenID = getAvailableIndex();
        require(viewWhitelistElevenStatus(msg.sender), "Not In Group One");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        require(totalAvailableForUser[msg.sender] >= 1, "Exceeds Alotted Amount");
        totalAvailableForUser[msg.sender] = totalAvailableForUser[msg.sender] - 1;
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function regularSaleMint() public payable {
        require(msg.value >= salePrice, "Insuffcient amount sent");
        require(regularSale == true, "Normal Sale Not Active");
        require(thisContract.send(msg.value), "Receiever must be the contract");
        require(_tokenIdCounter.current() < maxMoonBoyzSupply, "At Max Supply");
        uint256 _tokenID = getAvailableIndex();
        require(!super._exists(_tokenID), "Token ID Exists");
        
        _safeMint(msg.sender, _tokenID);
        _tokenIdCounter.increment();
    }
    
    function getAvailableIndex() public view returns(uint256) {
        for(uint256 i = 1; i < maxMoonBoyzSupply; i++) {
            if(!_exists(i)) {
                return i;
            }
        }
        return 0;
    }
    
    function totalSupply() external view returns (uint256) {
        return _tokenIdCounter.current();
    }
    
    function setWhitelistSale(bool _trueOrFalse) external onlyOwner {
        whiteListSale = _trueOrFalse;
    }
    
    function setRegularSale(bool _trueOrFalse) external onlyOwner {
        regularSale = _trueOrFalse;
    }
    
    function setSalePrice(uint256 _priceInWei) external onlyOwner {
        salePrice = _priceInWei;
    }
    
    function withdrawAll() external onlyOwner {
        for (uint256 i = 0; i < _team.length; i++) {
            address payable wallet = payable(_team[i]);
            release(wallet);
        }
    }
    
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./Address.sol";
import "./Context.sol";

/**
 * @title PaymentSplitter
 * @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
 * that the Ether will be split in this way, since it is handled transparently by the contract.
 *
 * The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
 * account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
 * an amount proportional to the percentage of total shares they were assigned.
 *
 * `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
 * accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
 * function.
 */
contract PaymentSplitter is Context {
    event PayeeAdded(address account, uint256 shares);
    event PaymentReleased(address to, uint256 amount);
    event PaymentReceived(address from, uint256 amount);

    uint256 private _totalShares;
    uint256 private _totalReleased;

    mapping(address => uint256) private _shares;
    mapping(address => uint256) private _released;
    address[] private _payees;

    /**
     * @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
     * the matching position in the `shares` array.
     *
     * All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
     * duplicates in `payees`.
     */
    constructor(address[] memory payees, uint256[] memory shares_) payable {
        require(payees.length == shares_.length, "PaymentSplitter: payees and shares length mismatch");
        require(payees.length > 0, "PaymentSplitter: no payees");

        for (uint256 i = 0; i < payees.length; i++) {
            _addPayee(payees[i], shares_[i]);
        }
    }

    /**
     * @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
     * reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
     * reliability of the events, and not the actual splitting of Ether.
     *
     * To learn more about this see the Solidity documentation for
     * https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
     * functions].
     */
    receive() external payable virtual {
        emit PaymentReceived(_msgSender(), msg.value);
    }

    /**
     * @dev Getter for the total shares held by payees.
     */
    function totalShares() external view returns (uint256) {
        return _totalShares;
    }

    /**
     * @dev Getter for the total amount of Ether already released.
     */
    function totalReleased() external view returns (uint256) {
        return _totalReleased;
    }

    /**
     * @dev Getter for the amount of shares held by an account.
     */
    function shares(address account) external view returns (uint256) {
        return _shares[account];
    }

    /**
     * @dev Getter for the amount of Ether already released to a payee.
     */
    function released(address account) external view returns (uint256) {
        return _released[account];
    }

    /**
     * @dev Getter for the address of the payee number `index`.
     */
    function payee(uint256 index) external view returns (address) {
        return _payees[index];
    }

    /**
     * @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
     * total shares and their previous withdrawals.
     */
    function release(address payable account) public virtual {
        require(_shares[account] > 0, "PaymentSplitter: account has no shares");

        uint256 totalReceived = address(this).balance + _totalReleased;
        uint256 payment = (totalReceived * _shares[account]) / _totalShares - _released[account];

        require(payment != 0, "PaymentSplitter: account is not due payment");

        _released[account] = _released[account] + payment;
        _totalReleased = _totalReleased + payment;

        Address.sendValue(account, payment);
        emit PaymentReleased(account, payment);
    }

    /**
     * @dev Add a new payee to the contract.
     * @param account The address of the payee to add.
     * @param shares_ The number of shares owned by the payee.
     */
    function _addPayee(address account, uint256 shares_) private {
        require(account != address(0), "PaymentSplitter: account is the zero address");
        require(shares_ > 0, "PaymentSplitter: shares are 0");
        require(_shares[account] == 0, "PaymentSplitter: account already has shares");

        _payees.push(account);
        _shares[account] = shares_;
        _totalShares = _totalShares + shares_;
        emit PayeeAdded(account, shares_);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }
}

{
  "compilationTarget": {
    "MoonBoyz.sol": "MoonBoyz"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}