// File: @openzeppelin/contracts/utils/Context.sol
// SPDX-License-Identifier: MIT


pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol



pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol



pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol



pragma solidity ^0.8.0;


/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol



pragma solidity ^0.8.0;




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The defaut value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        _approve(sender, _msgSender(), currentAllowance - amount);

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        _approve(_msgSender(), spender, currentAllowance - subtractedValue);

        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        _balances[sender] = senderBalance - amount;
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        _balances[account] = accountBalance - amount;
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Capped.sol



pragma solidity ^0.8.0;


/**
 * @dev Extension of {ERC20} that adds a cap to the supply of tokens.
 */
abstract contract ERC20Capped is ERC20 {
    uint256 immutable private _cap;

    /**
     * @dev Sets the value of the `cap`. This value is immutable, it can only be
     * set once during construction.
     */
    constructor (uint256 cap_) {
        require(cap_ > 0, "ERC20Capped: cap is 0");
        _cap = cap_;
    }

    /**
     * @dev Returns the cap on the token's total supply.
     */
    function cap() public view virtual returns (uint256) {
        return _cap;
    }

    /**
     * @dev See {ERC20-_mint}.
     */
    function _mint(address account, uint256 amount) internal virtual override {
        require(ERC20.totalSupply() + amount <= cap(), "ERC20Capped: cap exceeded");
        super._mint(account, amount);
    }
}

// File: contracts/libraries/SafeMath.sol



pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */

library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: contracts/SpheriumToken.sol


pragma solidity ^0.8.0;







pragma solidity ^0.8.0;

interface ILiquidityProtectionService {
    event Blocked(address pool, address trader, string trap);

    function getLiquidityPool(address tokenA, address tokenB)
    external view returns(address);

    function LiquidityAmountTrap_preValidateTransfer(
        address from, address to, uint amount,
        address counterToken, uint8 trapBlocks, uint128 trapAmount)
    external returns(bool passed);

    function FirstBlockTrap_preValidateTransfer(
        address from, address to, uint amount, address counterToken)
    external returns(bool passed);

    function LiquidityPercentTrap_preValidateTransfer(
        address from, address to, uint amount,
        address counterToken, uint8 trapBlocks, uint64 trapPercent)
    external returns(bool passed);

    function LiquidityActivityTrap_preValidateTransfer(
        address from, address to, uint amount,
        address counterToken, uint8 trapBlocks, uint8 trapCount)
    external returns(bool passed);

    function isBlocked(address counterToken, address who)
    external view returns(bool);
}




pragma solidity ^0.8.0;

abstract contract UsingLiquidityProtectionService {
    bool private protected = true;
    uint64 internal constant HUNDRED_PERCENT = 1e18;

    function liquidityProtectionService() internal pure virtual returns(address);
    function LPS_isAdmin() internal view virtual returns(bool);
    function LPS_balanceOf(address _holder) internal view virtual returns(uint);
    function LPS_transfer(address _from, address _to, uint _value) internal virtual;
    function counterToken() internal pure virtual returns(address) {
        return 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2; // WETH
    }
    function protectionChecker() internal view virtual returns(bool) {
        return ProtectionSwitch_manual();
    }

    function FirstBlockTrap_skip() internal pure virtual returns(bool) {
        return false;
    }

    function LiquidityAmountTrap_skip() internal pure virtual returns(bool) {
        return false;
    }
    function LiquidityAmountTrap_blocks() internal pure virtual returns(uint8) {
        return 5;
    }
    function LiquidityAmountTrap_amount() internal pure virtual returns(uint128) {
        return 5000 * 1e18; // Only valid for tokens with 18 decimals.
    }

    function LiquidityPercentTrap_skip() internal pure virtual returns(bool) {
        return false;
    }
    function LiquidityPercentTrap_blocks() internal pure virtual returns(uint8) {
        return 50;
    }
    function LiquidityPercentTrap_percent() internal pure virtual returns(uint64) {
        return HUNDRED_PERCENT / 1000; // 0.1%
    }

    function LiquidityActivityTrap_skip() internal pure virtual returns(bool) {
        return false;
    }
    function LiquidityActivityTrap_blocks() internal pure virtual returns(uint8) {
        return 30;
    }
    function LiquidityActivityTrap_count() internal pure virtual returns(uint8) {
        return 15;
    }

    function lps() private pure returns(ILiquidityProtectionService) {
        return ILiquidityProtectionService(liquidityProtectionService());
    }

    function LPS_beforeTokenTransfer(address _from, address _to, uint _amount) internal {
        if (protectionChecker()) {
            if (!protected) {
                return;
            }
            require(FirstBlockTrap_skip() || lps().FirstBlockTrap_preValidateTransfer(
                _from, _to, _amount, counterToken()), 'FirstBlockTrap: blocked');
            require(LiquidityAmountTrap_skip() || lps().LiquidityAmountTrap_preValidateTransfer(
                _from,
                _to,
                _amount,
                counterToken(),
                LiquidityAmountTrap_blocks(),
                LiquidityAmountTrap_amount()), 'LiquidityAmountTrap: blocked');
            require(LiquidityPercentTrap_skip() || lps().LiquidityPercentTrap_preValidateTransfer(
                _from,
                _to,
                _amount,
                counterToken(),
                LiquidityPercentTrap_blocks(),
                LiquidityPercentTrap_percent()), 'LiquidityPercentTrap: blocked');
            require(LiquidityActivityTrap_skip() || lps().LiquidityActivityTrap_preValidateTransfer(
                _from,
                _to,
                _amount,
                counterToken(),
                LiquidityActivityTrap_blocks(),
                LiquidityActivityTrap_count()), 'LiquidityActivityTrap: blocked');
        }
    }

    function revokeBlocked(address[] calldata _holders, address _revokeTo) external {
        require(LPS_isAdmin(), 'UsingLiquidityProtectionService: not admin');
        require(protectionChecker(), 'UsingLiquidityProtectionService: protection removed');
        protected = false;
        for (uint i = 0; i < _holders.length; i++) {
            address holder = _holders[i];
            if (lps().isBlocked(counterToken(), _holders[i])) {
                LPS_transfer(holder, _revokeTo, LPS_balanceOf(holder));
            }
        }
        protected = true;
    }

    function disableProtection() external {
        require(LPS_isAdmin(), 'UsingLiquidityProtectionService: not admin');
        protected = false;
    }

    function isProtected() public view returns(bool) {
        return protected;
    }

    function ProtectionSwitch_manual() internal view returns(bool) {
        return protected;
    }

    function ProtectionSwitch_timestamp(uint _timestamp) internal view returns(bool) {
        return not(passed(_timestamp));
    }

    function ProtectionSwitch_block(uint _block) internal view returns(bool) {
        return not(blockPassed(_block));
    }

    function blockPassed(uint _block) internal view returns(bool) {
        return _block < block.number;
    }

    function passed(uint _timestamp) internal view returns(bool) {
        return _timestamp < block.timestamp;
    }

    function not(bool _condition) internal pure returns(bool) {
        return !_condition;
    }
}






contract spheriumToken is ERC20, ERC20Capped, Ownable, UsingLiquidityProtectionService{

    using SafeMath for uint256;

    /// @dev A record of each accounts delegate
    mapping (address => address) internal _delegates;

    /// @notice A checkpoint for marking number of votes from a given block
    struct Checkpoint {
        uint32 fromBlock;
        uint256 votes;
    }

    /// @notice A record of votes checkpoints for each account, by index
    mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;

    /// @notice The number of checkpoints for each account
    mapping (address => uint32) public numCheckpoints;

    /// @notice The EIP-712 typehash for the contract's domain
    bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");

    /// @notice The EIP-712 typehash for the delegation struct used by the contract
    bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");

    /// @notice A record of states for signing / validating signatures
    mapping (address => uint) public nonces;

      /// @notice An event thats emitted when an account changes its delegate
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);

    /// @notice An event thats emitted when a delegate account's vote balance changes
    event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);



    constructor() ERC20("Spherium Token", "SPHRI") ERC20Capped(100000000 * (10**uint256(18))){}

     function _mint(address account, uint256 amount) internal virtual override(ERC20, ERC20Capped) {
        super._mint(account, amount);
    }


    function mint(address account, uint256 amount)public onlyOwner{
        uint256 amount_ = amount * (10**uint256(18));
        _mint(account,amount_);
    }

        /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal override {
        super._transfer(sender,recipient,amount);
        _moveDelegates(_delegates[sender], _delegates[recipient], amount);

    }

    /**
     * @notice Delegate votes from `msg.sender` to `delegatee`
     * @param delegator The address to get delegatee for
     */
    function delegates(address delegator)
        external
        view
        returns (address)
    {
        return _delegates[delegator];
    }

    /**
    * @notice Delegate votes from `msg.sender` to `delegatee`
    * @param delegatee The address to delegate votes to
    */
    function delegate(address delegatee) external {
        return _delegate(msg.sender, delegatee);
    }

    /**
     * @notice Delegates votes from signatory to `delegatee`
     * @param delegatee The address to delegate votes to
     * @param nonce The contract state required to match the signature
     * @param expiry The time at which to expire the signature
     * @param v The recovery byte of the signature
     * @param r Half of the ECDSA signature pair
     * @param s Half of the ECDSA signature pair
     */
    function delegateBySig(
        address delegatee,
        uint nonce,
        uint expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
    {
        bytes32 domainSeparator = keccak256(
            abi.encode(
                DOMAIN_TYPEHASH,
                keccak256(bytes(name())),
                getChainId(),
                address(this)
            )
        );

        bytes32 structHash = keccak256(
            abi.encode(
                DELEGATION_TYPEHASH,
                delegatee,
                nonce,
                expiry
            )
        );

        bytes32 digest = keccak256(
            abi.encodePacked(
                "\x19\x01",
                domainSeparator,
                structHash
            )
        );

        address signatory = ecrecover(digest, v, r, s);
        require(signatory != address(0), "SPHRI::delegateBySig: invalid signature");
        require(nonce == nonces[signatory]++, "SPHRI::delegateBySig: invalid nonce");
        require(block.timestamp <= expiry, "SPHRI::delegateBySig: signature expired");
        return _delegate(signatory, delegatee);
    }

    /**
     * @notice Gets the current votes balance for `account`
     * @param account The address to get votes balance
     * @return The number of current votes for `account`
     */
    function getCurrentVotes(address account)
        external
        view
        returns (uint256)
    {
        uint32 nCheckpoints = numCheckpoints[account];
        return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
    }

    /**
     * @notice Determine the prior number of votes for an account as of a block number
     * @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
     * @param account The address of the account to check
     * @param blockNumber The block number to get the vote balance at
     * @return The number of votes the account had as of the given block
     */
    function getPriorVotes(address account, uint blockNumber)
        external
        view
        returns (uint256)
    {
        require(blockNumber < block.number, "SPHRI::getPriorVotes: not yet determined");

        uint32 nCheckpoints = numCheckpoints[account];
        if (nCheckpoints == 0) {
            return 0;
        }

        // First check most recent balance
        if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
            return checkpoints[account][nCheckpoints - 1].votes;
        }

        // Next check implicit zero balance
        if (checkpoints[account][0].fromBlock > blockNumber) {
            return 0;
        }

        uint32 lower = 0;
        uint32 upper = nCheckpoints - 1;
        while (upper > lower) {
            uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
            Checkpoint memory cp = checkpoints[account][center];
            if (cp.fromBlock == blockNumber) {
                return cp.votes;
            } else if (cp.fromBlock < blockNumber) {
                lower = center;
            } else {
                upper = center - 1;
            }
        }
        return checkpoints[account][lower].votes;
    }

    function _delegate(address delegator, address delegatee)
        internal
    {
        address currentDelegate = _delegates[delegator];
        uint256 delegatorBalance = balanceOf(delegator);
        _delegates[delegator] = delegatee;

        emit DelegateChanged(delegator, currentDelegate, delegatee);

        _moveDelegates(currentDelegate, delegatee, delegatorBalance);
    }

    function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
        if (srcRep != dstRep && amount > 0) {
            if (srcRep != address(0)) {
                // decrease old representative
                uint32 srcRepNum = numCheckpoints[srcRep];
                uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
                uint256 srcRepNew = srcRepOld.sub(amount);
                _writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
            }

            if (dstRep != address(0)) {
                // increase new representative
                uint32 dstRepNum = numCheckpoints[dstRep];
                uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
                uint256 dstRepNew = dstRepOld.add(amount);
                _writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
            }
        }
    }

    function _writeCheckpoint(
        address delegatee,
        uint32 nCheckpoints,
        uint256 oldVotes,
        uint256 newVotes
    )
        internal
    {
        uint32 blockNumber = safe32(block.number, "SPHRI::_writeCheckpoint: block number exceeds 32 bits");

        if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
            checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
        } else {
            checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
            numCheckpoints[delegatee] = nCheckpoints + 1;
        }

        emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
    }

    function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function getChainId() internal view returns (uint) {
        uint256 chainId;
        assembly { chainId := chainid() }
        return chainId;
    }



    // Mandatory overrides.
    function _beforeTokenTransfer(address _from, address _to, uint _amount) internal override {
        super._beforeTokenTransfer(_from, _to, _amount);
        LPS_beforeTokenTransfer(_from, _to, _amount);
    }

    function LPS_isAdmin() internal view override returns(bool) {
        return _msgSender() == owner();
    }
    function liquidityProtectionService() internal pure override returns(address) {
        return 0xaabAe39230233d4FaFf04111EF08665880BD6dFb; // Replace with the correct address.
    }
    // Expose balanceOf().
    function LPS_balanceOf(address _holder) internal view override returns(uint) {
        return balanceOf(_holder);
    }
    // Expose internal transfer function.
    function LPS_transfer(address _from, address _to, uint _value) internal override {
        _transfer(_from, _to, _value);
    }
    // All the following overrides are optional, if you want to modify default behavior.

    // How the protection gets disabled.
    function protectionChecker() internal view override returns(bool) {
        return ProtectionSwitch_timestamp(1624665599); // Switch off protection on Friday, June 25, 2021 11:59:59 PM GMT
        // return ProtectionSwitch_block(13000000); // Switch off protection on block 13000000.
        //return ProtectionSwitch_manual(); // Switch off protection by calling disableProtection(); from owner. Default.
    }

    // This token will be pooled in pair with:
    function counterToken() internal pure override returns(address) {
        return 0xdAC17F958D2ee523a2206206994597C13D831ec7; // USDT
    }

    // Disable/Enable FirstBlockTrap
    function FirstBlockTrap_skip() internal pure override returns(bool) {
        return false;
    }

    // Disable/Enable absolute amount of tokens bought trap.
    // Per address per LiquidityAmountTrap_blocks.
    function LiquidityAmountTrap_skip() internal pure override returns(bool) {
        return false;
    }
    function LiquidityAmountTrap_blocks() internal pure override returns(uint8) {
        return 4;
    }
    function LiquidityAmountTrap_amount() internal pure override returns(uint128) {
        return 19000 * 1e18; // Only valid for tokens with 18 decimals.
    }

    // Disable/Enable percent of remaining liquidity bought trap.
    // Per address per block.
    function LiquidityPercentTrap_skip() internal pure override returns(bool) {
        return false;
    }
    function LiquidityPercentTrap_blocks() internal pure override returns(uint8) {
        return 6;
    }
    function LiquidityPercentTrap_percent() internal pure override returns(uint64) {
        return HUNDRED_PERCENT / 25; // 4%
    }

    // Disable/Enable number of trades trap.
    // Per block.
    function LiquidityActivityTrap_skip() internal pure override returns(bool) {
        return false;
    }
    function LiquidityActivityTrap_blocks() internal pure override returns(uint8) {
        return 3;
    }
    function LiquidityActivityTrap_count() internal pure override returns(uint8) {
        return 8;
    }

}

{
  "compilationTarget": {
    "spheriumToken.sol": "spheriumToken"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "remappings": []
}