// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.9.0;

import {StdStorage} from "./StdStorage.sol";
import {Vm, VmSafe} from "./Vm.sol";

abstract contract CommonBase {
    // Cheat code address, 0x7109709ECfa91a80626fF3989D68f67F5b1DD12D.
    address internal constant VM_ADDRESS = address(uint160(uint256(keccak256("hevm cheat code"))));
    // console.sol and console2.sol work by executing a staticcall to this address.
    address internal constant CONSOLE = 0x000000000000000000636F6e736F6c652e6c6f67;
    // Default address for tx.origin and msg.sender, 0x1804c8AB1F12E6bbf3894d4083f33e07309d1f38.
    address internal constant DEFAULT_SENDER = address(uint160(uint256(keccak256("foundry default caller"))));
    // Address of the test contract, deployed by the DEFAULT_SENDER.
    address internal constant DEFAULT_TEST_CONTRACT = 0x5615dEB798BB3E4dFa0139dFa1b3D433Cc23b72f;
    // Deterministic deployment address of the Multicall3 contract.
    address internal constant MULTICALL3_ADDRESS = 0xcA11bde05977b3631167028862bE2a173976CA11;

    uint256 internal constant UINT256_MAX =
        115792089237316195423570985008687907853269984665640564039457584007913129639935;

    Vm internal constant vm = Vm(VM_ADDRESS);
    StdStorage internal stdstore;
}

abstract contract TestBase is CommonBase {}

abstract contract ScriptBase is CommonBase {
    // Used when deploying with create2, https://github.com/Arachnid/deterministic-deployment-proxy.
    address internal constant CREATE2_FACTORY = 0x4e59b44847b379578588920cA78FbF26c0B4956C;

    VmSafe internal constant vmSafe = VmSafe(VM_ADDRESS);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

library BytesCheck {
    /// @notice check if the first digit of the hexadecimal value starts with `0x0`
    function checkFirstDigit0x0(uint8 x) public pure returns (bool) {
        uint8 y = uint8(x & 0xF0);
        uint8 z = y >> 4;
        return (z == 0x0);
    }

    /// @notice check if the first digit of the hexadecimal value starts with `0x1`
    function checkFirstDigit0x1(uint8 x) public pure returns (bool) {
        uint8 y = uint8(x & 0xF0);
        uint8 z = y >> 4;
        return (z == 0x1);
    }

    /// @notice check if the first digit of the hexadecimal value starts with `0x2`
    function checkFirstDigit0x2(uint8 x) public pure returns (bool) {
        uint8 y = uint8(x & 0xF0);
        uint8 z = y >> 4;
        return (z == 0x2);
    }

    /// @notice check if the first digit of the hexadecimal value starts with `0x3`
    function checkFirstDigit0x3(uint8 x) public pure returns (bool) {
        uint8 y = uint8(x & 0xF0);
        uint8 z = y >> 4;
        return (z == 0x3);
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later

/// @title Library for Bytes Manipulation
/// Based on Gonçalo Sá's BytesLib - but updated and heavily editted
pragma solidity ^0.8.0;

library BytesLib {
    /// @notice Returns the address starting at byte 0
    /// @dev length and overflow checks must be carried out before calling
    /// @param _bytes The input bytes string to slice
    /// @return tempAddress The address starting at byte 0
    function toAddress(bytes calldata _bytes) internal pure returns (address tempAddress) {
        assembly {
            tempAddress := shr(96, calldataload(_bytes.offset))
        }
    }

    /// @notice Returns the pool details starting at byte 0
    /// @dev length and overflow checks must be carried out before calling
    /// @param _bytes The input bytes string to slice
    /// @return token0 The address at byte 0
    /// @return fee The uint24 starting at byte 20
    /// @return token1 The address at byte 23
    function toPool(bytes calldata _bytes) internal pure returns (address token0, uint24 fee, address token1) {
        assembly {
            token0 := shr(96, calldataload(_bytes.offset))
            fee := shr(232, calldataload(add(_bytes.offset, 20)))
            token1 := shr(96, calldataload(add(_bytes.offset, 23)))
        }
    }

    /// @notice Decode the `_arg`-th element in `_bytes` as a dynamic array
    /// @dev The decoding of `length` and `offset` is universal,
    /// whereas the type declaration of `res` instructs the compiler how to read it.
    /// @param _bytes The input bytes string to slice
    /// @param _arg The index of the argument to extract
    /// @return length Length of the array
    /// @return offset Pointer to the data part of the array
    function toLengthOffset(bytes calldata _bytes, uint256 _arg)
        internal
        pure
        returns (uint256 length, uint256 offset)
    {
        assembly {
            // The offset of the `_arg`-th element is `32 * arg`, which stores the offset of the length pointer.
            let lengthPtr := add(_bytes.offset, calldataload(add(_bytes.offset, mul(0x20, _arg))))
            length := calldataload(lengthPtr)
            offset := add(lengthPtr, 0x20)
        }
    }

    /// @notice Decode the `_arg`-th element in `_bytes` as `bytes`
    /// @param _bytes The input bytes string to extract a bytes string from
    /// @param _arg The index of the argument to extract
    function toBytes(bytes calldata _bytes, uint256 _arg) internal pure returns (bytes calldata res) {
        (uint256 length, uint256 offset) = toLengthOffset(_bytes, _arg);
        assembly {
            res.length := length
            res.offset := offset
        }
    }

    /// @notice Decode the `_arg`-th element in `_bytes` as `address[]`
    /// @param _bytes The input bytes string to extract an address array from
    /// @param _arg The index of the argument to extract
    function toAddressArray(bytes calldata _bytes, uint256 _arg) internal pure returns (address[] calldata res) {
        (uint256 length, uint256 offset) = toLengthOffset(_bytes, _arg);
        assembly {
            res.length := length
            res.offset := offset
        }
    }

    /// @notice Decode the `_arg`-th element in `_bytes` as `bytes[]`
    /// @param _bytes The input bytes string to extract a bytes array from
    /// @param _arg The index of the argument to extract
    function toBytesArray(bytes calldata _bytes, uint256 _arg) internal pure returns (bytes[] calldata res) {
        (uint256 length, uint256 offset) = toLengthOffset(_bytes, _arg);
        assembly {
            res.length := length
            res.offset := offset
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (proxy/Clones.sol)

pragma solidity ^0.8.0;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-1167[EIP 1167] is a standard for
 * deploying minimal proxy contracts, also known as "clones".
 *
 * > To simply and cheaply clone contract functionality in an immutable way, this standard specifies
 * > a minimal bytecode implementation that delegates all calls to a known, fixed address.
 *
 * The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`
 * (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the
 * deterministic method.
 *
 * _Available since v3.4._
 */
library Clones {
    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create opcode, which should never revert.
     */
    function clone(address implementation) internal returns (address instance) {
        /// @solidity memory-safe-assembly
        assembly {
            // Cleans the upper 96 bits of the `implementation` word, then packs the first 3 bytes
            // of the `implementation` address with the bytecode before the address.
            mstore(0x00, or(shr(0xe8, shl(0x60, implementation)), 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000))
            // Packs the remaining 17 bytes of `implementation` with the bytecode after the address.
            mstore(0x20, or(shl(0x78, implementation), 0x5af43d82803e903d91602b57fd5bf3))
            instance := create(0, 0x09, 0x37)
        }
        require(instance != address(0), "ERC1167: create failed");
    }

    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create2 opcode and a `salt` to deterministically deploy
     * the clone. Using the same `implementation` and `salt` multiple time will revert, since
     * the clones cannot be deployed twice at the same address.
     */
    function cloneDeterministic(address implementation, bytes32 salt) internal returns (address instance) {
        /// @solidity memory-safe-assembly
        assembly {
            // Cleans the upper 96 bits of the `implementation` word, then packs the first 3 bytes
            // of the `implementation` address with the bytecode before the address.
            mstore(0x00, or(shr(0xe8, shl(0x60, implementation)), 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000))
            // Packs the remaining 17 bytes of `implementation` with the bytecode after the address.
            mstore(0x20, or(shl(0x78, implementation), 0x5af43d82803e903d91602b57fd5bf3))
            instance := create2(0, 0x09, 0x37, salt)
        }
        require(instance != address(0), "ERC1167: create2 failed");
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(
        address implementation,
        bytes32 salt,
        address deployer
    ) internal pure returns (address predicted) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(add(ptr, 0x38), deployer)
            mstore(add(ptr, 0x24), 0x5af43d82803e903d91602b57fd5bf3ff)
            mstore(add(ptr, 0x14), implementation)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73)
            mstore(add(ptr, 0x58), salt)
            mstore(add(ptr, 0x78), keccak256(add(ptr, 0x0c), 0x37))
            predicted := keccak256(add(ptr, 0x43), 0x55)
        }
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(address implementation, bytes32 salt)
        internal
        view
        returns (address predicted)
    {
        return predictDeterministicAddress(implementation, salt, address(this));
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

/// @title Commands similar to UniversalRouter
/// @notice Command Flags used to decode commands
/// @notice https://github.com/Uniswap/universal-router/blob/main/contracts/libraries/Commands.sol
library Commands {
    // Masks to extract certain bits of commands
    bytes1 internal constant FLAG_ALLOW_REVERT = 0x80;
    bytes1 internal constant COMMAND_TYPE_MASK = 0x3f;

    // Command Types. Maximum supported command at this moment is 0x3f.

    // Command Types where value >= 0x00, for Perpetuals
    uint256 constant GMX = 0x00;
    uint256 constant PERP = 0x01;
    uint256 constant CAP = 0x02;
    uint256 constant KWENTA = 0x03;
    // COMMAND_PLACEHOLDER = 0x04;
    // Future perpetual protocols can be added below

    // Command Types where value >= 0x10, for Spot
    uint256 constant UNI = 0x10;
    uint256 constant SUSHI = 0x11;
    uint256 constant ONE_INCH = 0x12;
    uint256 constant TRADER_JOE = 0x13;
    uint256 constant PANCAKE = 0x14;
    // COMMAND_PLACEHOLDER = 0x15;
    // Future spot protocols can be added below

    // Future financial services like options can be added with a value >= 0x20

    // Command Types where value >= 0x30, for trade functions
    uint256 constant CROSS_CHAIN = 0x30;
    uint256 constant MODIFY_ORDER = 0x31;
    uint256 constant CLAIM_REWARDS = 0x32;
    // COMMAND_PLACEHOLDER = 0x3d;
    // Future functions to interact with protocols can be added below
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;

import "../Strings.sol";

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

library Errors {
    // Zero Errors
    error ZeroAmount();
    error ZeroAddress();
    error ZeroTotalRaised();
    error ZeroClaimableAmount();

    // Modifier Errors
    error NotOwner();
    error NotAdmin();
    error CallerNotVault();
    error CallerNotTrade();
    error CallerNotVaultOwner();
    error CallerNotGenerate();
    error NoAccess();
    error NotPlugin();

    // State Errors
    error BelowMinFundraisingPeriod();
    error AboveMaxFundraisingPeriod();
    error BelowMinLeverage();
    error AboveMaxLeverage();
    error BelowMinEndTime();
    error TradeTokenNotApplicable();

    // STV errors
    error StvDoesNotExist();
    error AlreadyOpened();
    error MoreThanTotalRaised();
    error MoreThanTotalReceived();
    error StvNotOpen();
    error StvNotClose();
    error ClaimNotApplicable();
    error StvStatusMismatch();

    // General Errors
    error BalanceLessThanAmount();
    error FundraisingPeriodEnded();
    error TotalRaisedMoreThanCapacity();
    error StillFundraising();
    error CommandMisMatch();
    error TradeCommandMisMatch();
    error NotInitialised();
    error Initialised();
    error LengthMismatch();
    error TransferFailed();
    error DelegateCallFailed();
    error CallFailed(bytes);
    error AccountAlreadyExists();
    error SwapFailed();
    error ExchangeDataMismatch();
    error AccountNotExists();
    error InputMismatch();
    error AboveMaxDistributeIndex();
    error BelowMinStvDepositAmount();

    // Protocol specific errors
    error GmxFeesMisMatch();
    error UpdateOrderRequestMisMatch();
    error CancelOrderRequestMisMatch();

    // Subscriptions
    error NotASubscriber();
    error AlreadySubscribed();
    error MoreThanLimit();
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

import {Errors} from "src/libraries/Errors.sol";
import {IVault} from "src/interfaces/IVault.sol";
import {Clones} from "@openzeppelin/contracts/proxy/Clones.sol";
import {IOperator} from "src/storage/interfaces/IOperator.sol";

library Generate {
    /// @notice deploys a new clone of `StvAccount`
    /// @param capacityOfStv capacity of the stv
    /// @param manager address of the manager
    /// @param operator address of the operator
    /// @param maxFundraisingPeriod max fundraising period for an stv
    function generate(uint96 capacityOfStv, address manager, address operator, uint40 maxFundraisingPeriod)
        external
        returns (IVault.StvInfo memory stv)
    {
        address stvAccountImplementation = IOperator(operator).getAddress("STVACCOUNT");
        address defaultStableCoin = IOperator(operator).getAddress("DEFAULTSTABLECOIN");

        if (capacityOfStv < 1e6) revert Errors.InputMismatch();

        stv.manager = manager;
        stv.endTime = uint40(block.timestamp) + maxFundraisingPeriod;
        stv.capacityOfStv = capacityOfStv;

        bytes32 salt = keccak256(
            abi.encodePacked(
                manager, defaultStableCoin, capacityOfStv, maxFundraisingPeriod, block.timestamp, block.chainid
            )
        );
        address contractAddress = Clones.cloneDeterministic(stvAccountImplementation, salt);
        stv.stvId = contractAddress;
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

interface IAccount {
    function execute(address adapter, bytes calldata data, uint256 ethToSend)
        external
        payable
        returns (bytes memory returnData);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.9.0;

pragma experimental ABIEncoderV2;

interface IMulticall3 {
    struct Call {
        address target;
        bytes callData;
    }

    struct Call3 {
        address target;
        bool allowFailure;
        bytes callData;
    }

    struct Call3Value {
        address target;
        bool allowFailure;
        uint256 value;
        bytes callData;
    }

    struct Result {
        bool success;
        bytes returnData;
    }

    function aggregate(Call[] calldata calls)
        external
        payable
        returns (uint256 blockNumber, bytes[] memory returnData);

    function aggregate3(Call3[] calldata calls) external payable returns (Result[] memory returnData);

    function aggregate3Value(Call3Value[] calldata calls) external payable returns (Result[] memory returnData);

    function blockAndAggregate(Call[] calldata calls)
        external
        payable
        returns (uint256 blockNumber, bytes32 blockHash, Result[] memory returnData);

    function getBasefee() external view returns (uint256 basefee);

    function getBlockHash(uint256 blockNumber) external view returns (bytes32 blockHash);

    function getBlockNumber() external view returns (uint256 blockNumber);

    function getChainId() external view returns (uint256 chainid);

    function getCurrentBlockCoinbase() external view returns (address coinbase);

    function getCurrentBlockDifficulty() external view returns (uint256 difficulty);

    function getCurrentBlockGasLimit() external view returns (uint256 gaslimit);

    function getCurrentBlockTimestamp() external view returns (uint256 timestamp);

    function getEthBalance(address addr) external view returns (uint256 balance);

    function getLastBlockHash() external view returns (bytes32 blockHash);

    function tryAggregate(bool requireSuccess, Call[] calldata calls)
        external
        payable
        returns (Result[] memory returnData);

    function tryBlockAndAggregate(bool requireSuccess, Call[] calldata calls)
        external
        payable
        returns (uint256 blockNumber, bytes32 blockHash, Result[] memory returnData);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

interface IOperator {
    function getMaxDistributeIndex() external view returns (uint256);
    function getAddress(string calldata adapter) external view returns (address);
    function getAddresses(string[] calldata adapters) external view returns (address[] memory);
    function getTraderAccount(address trader) external view returns (address);
    function getPlugin(address plugin) external view returns (bool);
    function getPlugins(address[] calldata plugins) external view returns (bool[] memory);
    function setAddress(string calldata adapter, address addr) external;
    function setAddresses(string[] calldata adapters, address[] calldata addresses) external;
    function setPlugin(address plugin, bool isPlugin) external;
    function setPlugins(address[] calldata plugins, bool[] calldata isPlugin) external;
    function setTraderAccount(address trader, address account) external;
    function getAllSubscribers(address manager) external view returns (address[] memory);
    function getIsSubscriber(address manager, address subscriber) external view returns (bool);
    function getSubscriptionAmount(address manager, address subscriber) external view returns (uint96);
    function getTotalSubscribedAmountPerManager(address manager) external view returns (uint96);
    function setSubscribe(address manager, address subscriber, uint96 maxLimit) external;
    function setUnsubscribe(address manager, address subscriber) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.15;

/// @title AllowanceTransfer
/// @notice Handles ERC20 token permissions through signature based allowance setting and ERC20 token transfers by checking allowed amounts
/// @dev Requires user's token approval on the Permit2 contract
interface IPermit2 {
    /// @notice Thrown when an allowance on a token has expired.
    /// @param deadline The timestamp at which the allowed amount is no longer valid
    error AllowanceExpired(uint256 deadline);

    /// @notice Thrown when an allowance on a token has been depleted.
    /// @param amount The maximum amount allowed
    error InsufficientAllowance(uint256 amount);

    /// @notice Thrown when too many nonces are invalidated.
    error ExcessiveInvalidation();

    /// @notice Emits an event when the owner successfully invalidates an ordered nonce.
    event NonceInvalidation(
        address indexed owner, address indexed token, address indexed spender, uint48 newNonce, uint48 oldNonce
    );

    /// @notice Emits an event when the owner successfully sets permissions on a token for the spender.
    event Approval(
        address indexed owner, address indexed token, address indexed spender, uint160 amount, uint48 expiration
    );

    /// @notice Emits an event when the owner successfully sets permissions using a permit signature on a token for the spender.
    event Permit(
        address indexed owner,
        address indexed token,
        address indexed spender,
        uint160 amount,
        uint48 expiration,
        uint48 nonce
    );

    /// @notice Emits an event when the owner sets the allowance back to 0 with the lockdown function.
    event Lockdown(address indexed owner, address token, address spender);

    /// @notice The permit data for a token
    struct PermitDetails {
        // ERC20 token address
        address token;
        // the maximum amount allowed to spend
        uint160 amount;
        // timestamp at which a spender's token allowances become invalid
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }

    /// @notice The permit message signed for a single token allownce
    struct PermitSingle {
        // the permit data for a single token alownce
        PermitDetails details;
        // address permissioned on the allowed tokens
        address spender;
        // deadline on the permit signature
        uint256 sigDeadline;
    }

    /// @notice The permit message signed for multiple token allowances
    struct PermitBatch {
        // the permit data for multiple token allowances
        PermitDetails[] details;
        // address permissioned on the allowed tokens
        address spender;
        // deadline on the permit signature
        uint256 sigDeadline;
    }

    /// @notice The saved permissions
    /// @dev This info is saved per owner, per token, per spender and all signed over in the permit message
    /// @dev Setting amount to type(uint160).max sets an unlimited approval
    struct PackedAllowance {
        // amount allowed
        uint160 amount;
        // permission expiry
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }

    /// @notice A token spender pair.
    struct TokenSpenderPair {
        // the token the spender is approved
        address token;
        // the spender address
        address spender;
    }

    /// @notice Details for a token transfer.
    struct AllowanceTransferDetails {
        // the owner of the token
        address from;
        // the recipient of the token
        address to;
        // the amount of the token
        uint160 amount;
        // the token to be transferred
        address token;
    }

    /// @notice A mapping from owner address to token address to spender address to PackedAllowance struct, which contains details and conditions of the approval.
    /// @notice The mapping is indexed in the above order see: allowance[ownerAddress][tokenAddress][spenderAddress]
    /// @dev The packed slot holds the allowed amount, expiration at which the allowed amount is no longer valid, and current nonce thats updated on any signature based approvals.
    function allowance(address, address, address) external view returns (uint160, uint48, uint48);

    /// @notice Approves the spender to use up to amount of the specified token up until the expiration
    /// @param token The token to approve
    /// @param spender The spender address to approve
    /// @param amount The approved amount of the token
    /// @param expiration The timestamp at which the approval is no longer valid
    /// @dev The packed allowance also holds a nonce, which will stay unchanged in approve
    /// @dev Setting amount to type(uint160).max sets an unlimited approval
    function approve(address token, address spender, uint160 amount, uint48 expiration) external;

    /// @notice Permit a spender to a given amount of the owners token via the owner's EIP-712 signature
    /// @dev May fail if the owner's nonce was invalidated in-flight by invalidateNonce
    /// @param owner The owner of the tokens being approved
    /// @param permitSingle Data signed over by the owner specifying the terms of approval
    /// @param signature The owner's signature over the permit data
    function permit(address owner, PermitSingle memory permitSingle, bytes calldata signature) external;

    /// @notice Permit a spender to the signed amounts of the owners tokens via the owner's EIP-712 signature
    /// @dev May fail if the owner's nonce was invalidated in-flight by invalidateNonce
    /// @param owner The owner of the tokens being approved
    /// @param permitBatch Data signed over by the owner specifying the terms of approval
    /// @param signature The owner's signature over the permit data
    function permit(address owner, PermitBatch memory permitBatch, bytes calldata signature) external;

    /// @notice Transfer approved tokens from one address to another
    /// @param from The address to transfer from
    /// @param to The address of the recipient
    /// @param amount The amount of the token to transfer
    /// @param token The token address to transfer
    /// @dev Requires the from address to have approved at least the desired amount
    /// of tokens to msg.sender.
    function transferFrom(address from, address to, uint160 amount, address token) external;

    /// @notice Transfer approved tokens in a batch
    /// @param transferDetails Array of owners, recipients, amounts, and tokens for the transfers
    /// @dev Requires the from addresses to have approved at least the desired amount
    /// of tokens to msg.sender.
    function transferFrom(AllowanceTransferDetails[] calldata transferDetails) external;

    /// @notice Enables performing a "lockdown" of the sender's Permit2 identity
    /// by batch revoking approvals
    /// @param approvals Array of approvals to revoke.
    function lockdown(TokenSpenderPair[] calldata approvals) external;

    /// @notice Invalidate nonces for a given (token, spender) pair
    /// @param token The token to invalidate nonces for
    /// @param spender The spender to invalidate nonces for
    /// @param newNonce The new nonce to set. Invalidates all nonces less than it.
    /// @dev Can't invalidate more than 2**16 nonces per transaction.
    function invalidateNonces(address token, address spender, uint48 newNonce) external;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

interface IPerpTrade {
    function execute(uint256 command, bytes calldata data, bool isOpen) external payable;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

interface IQ {
    function owner() external view returns (address);
    function admin() external view returns (address);
    function perpTrade() external view returns (address);
    function whitelistedPlugins(address) external view returns (bool);
    function defaultStableCoin() external view returns (address);
    function traderAccount(address) external view returns (address);
    function createAccount(address) external returns (address);
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

import {IVault} from "src/interfaces/IVault.sol";

interface IStvAccount {
    function stvInfo() external view returns (IVault.StvInfo memory);
    function stvBalance() external view returns (IVault.StvBalance memory);
    function investorInfo(address investorAccount) external view returns (IVault.InvestorInfo memory);
    function investors() external view returns (address[] memory);
    function getInvestors() external view returns (address[] memory);
    function totalTradeTokenReceivedAfterOpen(address token) external view returns (uint256);
    function totalTradeTokenUsedForClose(address token) external view returns (uint256);
    function execute(address adapter, bytes calldata data, uint256 ethToSend) external payable;
    function createStv(IVault.StvInfo memory stv) external;
    function deposit(address investorAccount, uint96 amount, bool isFirstDeposit) external;
    function liquidate() external;
    function execute(uint256 amount, address tradeToken, uint256 totalReceived, bool isOpen) external;
    function distribute(uint96 totalRemainingAfterDistribute, uint96 mFee, uint96 pFee) external;
    function distributeOut(bool isCancel, uint256 indexFrom, uint256 indexTo) external;
    function updateStatus(IVault.StvStatus status) external;
    function cancel() external;
}

// SPDX-License-Identifier: GPL-3.0

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB, uint256 liquidity);
    function addLiquidityETH(
        address token,
        uint256 amountTokenDesired,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external payable returns (uint256 amountToken, uint256 amountETH, uint256 liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountA, uint256 amountB);
    function removeLiquidityETH(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountToken, uint256 amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint256 liquidity,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountA, uint256 amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountToken, uint256 amountETH);
    function swapExactTokensForTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
    function swapTokensForExactTokens(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
    function swapExactETHForTokens(uint256 amountOutMin, address[] calldata path, address to, uint256 deadline)
        external
        payable
        returns (uint256[] memory amounts);
    function swapTokensForExactETH(
        uint256 amountOut,
        uint256 amountInMax,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
    function swapExactTokensForETH(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
    function swapETHForExactTokens(uint256 amountOut, address[] calldata path, address to, uint256 deadline)
        external
        payable
        returns (uint256[] memory amounts);

    function quote(uint256 amountA, uint256 reserveA, uint256 reserveB) external pure returns (uint256 amountB);
    function getAmountOut(uint256 amountIn, uint256 reserveIn, uint256 reserveOut)
        external
        pure
        returns (uint256 amountOut);
    function getAmountIn(uint256 amountOut, uint256 reserveIn, uint256 reserveOut)
        external
        pure
        returns (uint256 amountIn);
    function getAmountsOut(uint256 amountIn, address[] calldata path)
        external
        view
        returns (uint256[] memory amounts);
    function getAmountsIn(uint256 amountOut, address[] calldata path)
        external
        view
        returns (uint256[] memory amounts);
}

interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline
    ) external returns (uint256 amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint256 liquidity,
        uint256 amountTokenMin,
        uint256 amountETHMin,
        address to,
        uint256 deadline,
        bool approveMax,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (uint256 amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.13;

import {IERC721Receiver} from "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import {IERC1155Receiver} from "@openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol";

/// @title LooksRare Rewards Collector
/// @notice Implements a permissionless call to fetch LooksRare rewards earned by Universal Router users
/// and transfers them to an external rewards distributor contract
interface IRewardsCollector {
    /// @notice Fetches users' LooksRare rewards and sends them to the distributor contract
    /// @param looksRareClaim The data required by LooksRare to claim reward tokens
    function collectRewards(bytes calldata looksRareClaim) external;
}

interface IUniversalRouter is IRewardsCollector, IERC721Receiver, IERC1155Receiver {
    /// @notice Thrown when a required command has failed
    error ExecutionFailed(uint256 commandIndex, bytes message);

    /// @notice Thrown when attempting to send ETH directly to the contract
    error ETHNotAccepted();

    /// @notice Thrown when executing commands with an expired deadline
    error TransactionDeadlinePassed();

    /// @notice Thrown when attempting to execute commands and an incorrect number of inputs are provided
    error LengthMismatch();

    /// @notice Executes encoded commands along with provided inputs. Reverts if deadline has expired.
    /// @param commands A set of concatenated commands, each 1 byte in length
    /// @param inputs An array of byte strings containing abi encoded inputs for each command
    /// @param deadline The deadline by which the transaction must be executed
    function execute(bytes calldata commands, bytes[] calldata inputs, uint256 deadline) external payable;

    /// @notice Executes encoded commands along with provided inputs.
    /// @param commands A set of concatenated commands, each 1 byte in length
    /// @param inputs An array of byte strings containing abi encoded inputs for each command
    function execute(bytes calldata commands, bytes[] calldata inputs) external payable;
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

interface IVault {
    /// @notice Enum to describe the trading status of the vault
    /// @dev NOT_OPENED - Not open
    /// @dev OPEN - opened position
    /// @dev CANCELLED_WITH_ZERO_RAISE - cancelled without any raise
    /// @dev CANCELLED_WITH_NO_FILL - cancelled with raise but not opening a position
    /// @dev CANCELLED_BY_MANAGER - cancelled by the manager after raising
    /// @dev DISTRIBUTED - distributed fees
    /// @dev LIQUIDATED - liquidated position
    enum StvStatus {
        NOT_OPENED,
        OPEN,
        CANCELLED_WITH_ZERO_RAISE,
        CANCELLED_WITH_NO_FILL,
        CANCELLED_BY_MANAGER,
        DISTRIBUTED,
        LIQUIDATED
    }

    struct StvInfo {
        address stvId;
        uint40 endTime;
        StvStatus status;
        address manager;
        uint96 capacityOfStv;
    }

    struct StvBalance {
        uint96 totalRaised;
        uint96 totalRemainingAfterDistribute;
    }

    struct InvestorInfo {
        uint96 depositAmount;
        uint96 claimedAmount;
        bool claimed;
    }

    function getQ() external view returns (address);
    function maxFundraisingPeriod() external view returns (uint40);
    function distributeOut(address stvId, bool isCancel, uint256 indexFrom, uint256 indexTo) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.17;

import "lib/forge-std/src/Test.sol";
import {Commands} from "src/libraries/Commands.sol";
import {Errors} from "src/libraries/Errors.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IUniversalRouter} from "src/protocols/uni/interfaces/IUniversalRouter.sol";
import {IPermit2} from "src/protocols/uni/interfaces/IPermit2.sol";
import {IUniswapV2Router02} from "src/protocols/sushi/interfaces/IUniswapV2Router02.sol";
import {Commands as UniCommands} from "test/libraries/Commands.sol";
import {BytesLib} from "test/libraries/BytesLib.sol";
import {IOperator} from "src/storage/interfaces/IOperator.sol";
import {IStvAccount} from "src/interfaces/IStvAccount.sol";

contract SpotTrade {
    using BytesLib for bytes;
    using SafeERC20 for IERC20;

    address public operator;

    constructor(address _operator) {
        operator = _operator;
    }

    modifier onlyVault() {
        address vault = IOperator(operator).getAddress("VAULT");
        if (msg.sender != vault) revert Errors.NoAccess();
        _;
    }

    function uni(
        address tokenIn,
        address tokenOut,
        uint256 amountIn,
        bytes calldata commands,
        bytes[] calldata inputs,
        uint256 deadline,
        bytes memory addresses
    ) external onlyVault returns (uint256) {
        address receiver = abi.decode(addresses, (address));
        address universalRouter = IOperator(operator).getAddress("UNIVERSALROUTER");
        _check(tokenIn, tokenOut, amountIn, commands, inputs, receiver);

        _approveUni(receiver, tokenIn, universalRouter, uint160(amountIn));
        uint256 balanceBeforeSwap = IERC20(tokenOut).balanceOf(receiver);
        if (deadline > 0) {
            bytes memory swapTxData =
                abi.encodeWithSignature("execute(bytes,bytes[],uint256)", commands, inputs, deadline);
            IStvAccount(receiver).execute(universalRouter, swapTxData, 0);
        } else {
            bytes memory swapTxData = abi.encodeWithSignature("execute(bytes,bytes[])", commands, inputs);
            IStvAccount(receiver).execute(universalRouter, swapTxData, 0);
        }
        uint256 balanceAfterSwap = IERC20(tokenOut).balanceOf(receiver);

        return balanceAfterSwap - balanceBeforeSwap;
    }

    function _approveUni(address receiver, address tokenIn, address universalRouter, uint160 amountIn) internal {
        address permit2 = IOperator(operator).getAddress("PERMIT2");
        bytes memory approvalData = abi.encodeWithSignature("approve(address,uint256)", permit2, type(uint48).max);
        IStvAccount(receiver).execute(tokenIn, approvalData, 0);
        approvalData = abi.encodeWithSignature(
            "approve(address,address,uint160,uint48)", tokenIn, universalRouter, uint160(amountIn), type(uint48).max
        );
        IStvAccount(receiver).execute(permit2, approvalData, 0);
    }

    function _check(
        address tokenIn,
        address tokenOut,
        uint256 amountIn,
        bytes calldata commands,
        bytes[] calldata inputs,
        address receiver
    ) internal pure {
        uint256 amount;
        for (uint256 i = 0; i < commands.length;) {
            bytes calldata input = inputs[i];
            // the address of the receiver should be spot when opening and trade when closing
            if (address(bytes20(input[12:32])) != receiver) revert Errors.InputMismatch();
            // since the route can be through v2 and v3, adding the swap amount for each input should be equal to the total swap amount
            amount += uint256(bytes32(input[32:64]));

            if (commands[i] == bytes1(uint8(UniCommands.V2_SWAP_EXACT_IN))) {
                address[] calldata path = input.toAddressArray(3);
                // the first address of the path should be tokenIn
                if (path[0] != tokenIn) revert Errors.InputMismatch();
                // last address of the path should be the tokenOut
                if (path[path.length - 1] != tokenOut) revert Errors.InputMismatch();
            } else if (commands[i] == bytes1(uint8(UniCommands.V3_SWAP_EXACT_IN))) {
                bytes calldata path = input.toBytes(3);
                // the first address of the path should be tokenIn
                if (address(bytes20(path[:20])) != tokenIn) revert Errors.InputMismatch();
                // last address of the path should be the tokenOut
                if (address(bytes20(path[path.length - 20:])) != tokenOut) revert Errors.InputMismatch();
            } else {
                // if its not v2 or v3, then revert
                revert Errors.CommandMisMatch();
            }
            unchecked {
                ++i;
            }
        }
        if (amount != uint256(amountIn)) revert Errors.InputMismatch();
    }

    function sushi(address tokenIn, address tokenOut, uint256 amountIn, uint256 amountOutMin, address receiver)
        external
        onlyVault
        returns (uint256)
    {
        address router = IOperator(operator).getAddress("SUSHIROUTER");
        bytes memory approvalData = abi.encodeWithSignature("approve(address,uint256)", router, amountIn);
        IStvAccount(receiver).execute(tokenIn, approvalData, 0);
        address[] memory tokenPath;
        address wrappedToken = IOperator(operator).getAddress("WRAPPEDTOKEN");

        if (tokenIn == wrappedToken || tokenOut == wrappedToken) {
            tokenPath = new address[](2);
            tokenPath[0] = tokenIn;
            tokenPath[1] = tokenOut;
        } else {
            tokenPath = new address[](3);
            tokenPath[0] = tokenIn;
            tokenPath[1] = wrappedToken;
            tokenPath[2] = tokenOut;
        }

        uint256 balanceBeforeSwap = IERC20(tokenOut).balanceOf(receiver);
        bytes memory swapTxData = abi.encodeWithSignature(
            "swapExactTokensForTokens(uint256,uint256,address[],address,uint256)",
            amountIn,
            amountOutMin,
            tokenPath,
            receiver,
            block.timestamp
        );
        IStvAccount(receiver).execute(router, swapTxData, 0);
        uint256 balanceAfterSwap = IERC20(tokenOut).balanceOf(receiver);
        return balanceAfterSwap - balanceBeforeSwap;
    }

    function oneInch(address tokenIn, address tokenOut, address receiver, bytes memory exchangeData)
        external
        onlyVault
        returns (uint256)
    {
        if (exchangeData.length == 0) revert Errors.ExchangeDataMismatch();
        address router = IOperator(operator).getAddress("ONEINCHROUTER");
        uint256 tokenInBalanceBefore = IERC20(tokenIn).balanceOf(receiver);
        uint256 tokenOutBalanceBefore = IERC20(tokenOut).balanceOf(receiver);
        bytes memory approvalData = abi.encodeWithSignature("approve(address,uint256)", router, type(uint256).max);
        IStvAccount(receiver).execute(tokenIn, approvalData, 0);
        IStvAccount(receiver).execute(router, exchangeData, 0);
        approvalData = abi.encodeWithSignature("approve(address,uint256)", router, 0);
        IStvAccount(receiver).execute(tokenIn, approvalData, 0);
        uint256 tokenInBalanceAfter = IERC20(tokenIn).balanceOf(receiver);
        uint256 tokenOutBalanceAfter = IERC20(tokenOut).balanceOf(receiver);
        if (tokenInBalanceAfter >= tokenInBalanceBefore) revert Errors.BalanceLessThanAmount();
        if (tokenOutBalanceAfter <= tokenOutBalanceBefore) revert Errors.BalanceLessThanAmount();
        return tokenOutBalanceAfter - tokenOutBalanceBefore;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.9.0;

import {DSTest} from "ds-test/test.sol";
import {stdMath} from "./StdMath.sol";

abstract contract StdAssertions is DSTest {
    event log_array(uint256[] val);
    event log_array(int256[] val);
    event log_array(address[] val);
    event log_named_array(string key, uint256[] val);
    event log_named_array(string key, int256[] val);
    event log_named_array(string key, address[] val);

    function fail(string memory err) internal virtual {
        emit log_named_string("Error", err);
        fail();
    }

    function assertFalse(bool data) internal virtual {
        assertTrue(!data);
    }

    function assertFalse(bool data, string memory err) internal virtual {
        assertTrue(!data, err);
    }

    function assertEq(bool a, bool b) internal virtual {
        if (a != b) {
            emit log("Error: a == b not satisfied [bool]");
            emit log_named_string("      Left", a ? "true" : "false");
            emit log_named_string("     Right", b ? "true" : "false");
            fail();
        }
    }

    function assertEq(bool a, bool b, string memory err) internal virtual {
        if (a != b) {
            emit log_named_string("Error", err);
            assertEq(a, b);
        }
    }

    function assertEq(bytes memory a, bytes memory b) internal virtual {
        assertEq0(a, b);
    }

    function assertEq(bytes memory a, bytes memory b, string memory err) internal virtual {
        assertEq0(a, b, err);
    }

    function assertEq(uint256[] memory a, uint256[] memory b) internal virtual {
        if (keccak256(abi.encode(a)) != keccak256(abi.encode(b))) {
            emit log("Error: a == b not satisfied [uint[]]");
            emit log_named_array("      Left", a);
            emit log_named_array("     Right", b);
            fail();
        }
    }

    function assertEq(int256[] memory a, int256[] memory b) internal virtual {
        if (keccak256(abi.encode(a)) != keccak256(abi.encode(b))) {
            emit log("Error: a == b not satisfied [int[]]");
            emit log_named_array("      Left", a);
            emit log_named_array("     Right", b);
            fail();
        }
    }

    function assertEq(address[] memory a, address[] memory b) internal virtual {
        if (keccak256(abi.encode(a)) != keccak256(abi.encode(b))) {
            emit log("Error: a == b not satisfied [address[]]");
            emit log_named_array("      Left", a);
            emit log_named_array("     Right", b);
            fail();
        }
    }

    function assertEq(uint256[] memory a, uint256[] memory b, string memory err) internal virtual {
        if (keccak256(abi.encode(a)) != keccak256(abi.encode(b))) {
            emit log_named_string("Error", err);
            assertEq(a, b);
        }
    }

    function assertEq(int256[] memory a, int256[] memory b, string memory err) internal virtual {
        if (keccak256(abi.encode(a)) != keccak256(abi.encode(b))) {
            emit log_named_string("Error", err);
            assertEq(a, b);
        }
    }

    function assertEq(address[] memory a, address[] memory b, string memory err) internal virtual {
        if (keccak256(abi.encode(a)) != keccak256(abi.encode(b))) {
            emit log_named_string("Error", err);
            assertEq(a, b);
        }
    }

    // Legacy helper
    function assertEqUint(uint256 a, uint256 b) internal virtual {
        assertEq(uint256(a), uint256(b));
    }

    function assertApproxEqAbs(uint256 a, uint256 b, uint256 maxDelta) internal virtual {
        uint256 delta = stdMath.delta(a, b);

        if (delta > maxDelta) {
            emit log("Error: a ~= b not satisfied [uint]");
            emit log_named_uint("      Left", a);
            emit log_named_uint("     Right", b);
            emit log_named_uint(" Max Delta", maxDelta);
            emit log_named_uint("     Delta", delta);
            fail();
        }
    }

    function assertApproxEqAbs(uint256 a, uint256 b, uint256 maxDelta, string memory err) internal virtual {
        uint256 delta = stdMath.delta(a, b);

        if (delta > maxDelta) {
            emit log_named_string("Error", err);
            assertApproxEqAbs(a, b, maxDelta);
        }
    }

    function assertApproxEqAbsDecimal(uint256 a, uint256 b, uint256 maxDelta, uint256 decimals) internal virtual {
        uint256 delta = stdMath.delta(a, b);

        if (delta > maxDelta) {
            emit log("Error: a ~= b not satisfied [uint]");
            emit log_named_decimal_uint("      Left", a, decimals);
            emit log_named_decimal_uint("     Right", b, decimals);
            emit log_named_decimal_uint(" Max Delta", maxDelta, decimals);
            emit log_named_decimal_uint("     Delta", delta, decimals);
            fail();
        }
    }

    function assertApproxEqAbsDecimal(uint256 a, uint256 b, uint256 maxDelta, uint256 decimals, string memory err)
        internal
        virtual
    {
        uint256 delta = stdMath.delta(a, b);

        if (delta > maxDelta) {
            emit log_named_string("Error", err);
            assertApproxEqAbsDecimal(a, b, maxDelta, decimals);
        }
    }

    function assertApproxEqAbs(int256 a, int256 b, uint256 maxDelta) internal virtual {
        uint256 delta = stdMath.delta(a, b);

        if (delta > maxDelta) {
            emit log("Error: a ~= b not satisfied [int]");
            emit log_named_int("       Left", a);
            emit log_named_int("      Right", b);
            emit log_named_uint(" Max Delta", maxDelta);
            emit log_named_uint("     Delta", delta);
            fail();
        }
    }

    function assertApproxEqAbs(int256 a, int256 b, uint256 maxDelta, string memory err) internal virtual {
        uint256 delta = stdMath.delta(a, b);

        if (delta > maxDelta) {
            emit log_named_string("Error", err);
            assertApproxEqAbs(a, b, maxDelta);
        }
    }

    function assertApproxEqAbsDecimal(int256 a, int256 b, uint256 maxDelta, uint256 decimals) internal virtual {
        uint256 delta = stdMath.delta(a, b);

        if (delta > maxDelta) {
            emit log("Error: a ~= b not satisfied [int]");
            emit log_named_decimal_int("      Left", a, decimals);
            emit log_named_decimal_int("     Right", b, decimals);
            emit log_named_decimal_uint(" Max Delta", maxDelta, decimals);
            emit log_named_decimal_uint("     Delta", delta, decimals);
            fail();
        }
    }

    function assertApproxEqAbsDecimal(int256 a, int256 b, uint256 maxDelta, uint256 decimals, string memory err)
        internal
        virtual
    {
        uint256 delta = stdMath.delta(a, b);

        if (delta > maxDelta) {
            emit log_named_string("Error", err);
            assertApproxEqAbsDecimal(a, b, maxDelta, decimals);
        }
    }

    function assertApproxEqRel(
        uint256 a,
        uint256 b,
        uint256 maxPercentDelta // An 18 decimal fixed point number, where 1e18 == 100%
    ) internal virtual {
        if (b == 0) return assertEq(a, b); // If the left is 0, right must be too.

        uint256 percentDelta = stdMath.percentDelta(a, b);

        if (percentDelta > maxPercentDelta) {
            emit log("Error: a ~= b not satisfied [uint]");
            emit log_named_uint("        Left", a);
            emit log_named_uint("       Right", b);
            emit log_named_decimal_uint(" Max % Delta", maxPercentDelta, 18);
            emit log_named_decimal_uint("     % Delta", percentDelta, 18);
            fail();
        }
    }

    function assertApproxEqRel(
        uint256 a,
        uint256 b,
        uint256 maxPercentDelta, // An 18 decimal fixed point number, where 1e18 == 100%
        string memory err
    ) internal virtual {
        if (b == 0) return assertEq(a, b, err); // If the left is 0, right must be too.

        uint256 percentDelta = stdMath.percentDelta(a, b);

        if (percentDelta > maxPercentDelta) {
            emit log_named_string("Error", err);
            assertApproxEqRel(a, b, maxPercentDelta);
        }
    }

    function assertApproxEqRelDecimal(
        uint256 a,
        uint256 b,
        uint256 maxPercentDelta, // An 18 decimal fixed point number, where 1e18 == 100%
        uint256 decimals
    ) internal virtual {
        if (b == 0) return assertEq(a, b); // If the left is 0, right must be too.

        uint256 percentDelta = stdMath.percentDelta(a, b);

        if (percentDelta > maxPercentDelta) {
            emit log("Error: a ~= b not satisfied [uint]");
            emit log_named_decimal_uint("        Left", a, decimals);
            emit log_named_decimal_uint("       Right", b, decimals);
            emit log_named_decimal_uint(" Max % Delta", maxPercentDelta, 18);
            emit log_named_decimal_uint("     % Delta", percentDelta, 18);
            fail();
        }
    }

    function assertApproxEqRelDecimal(
        uint256 a,
        uint256 b,
        uint256 maxPercentDelta, // An 18 decimal fixed point number, where 1e18 == 100%
        uint256 decimals,
        string memory err
    ) internal virtual {
        if (b == 0) return assertEq(a, b, err); // If the left is 0, right must be too.

        uint256 percentDelta = stdMath.percentDelta(a, b);

        if (percentDelta > maxPercentDelta) {
            emit log_named_string("Error", err);
            assertApproxEqRelDecimal(a, b, maxPercentDelta, decimals);
        }
    }

    function assertApproxEqRel(int256 a, int256 b, uint256 maxPercentDelta) internal virtual {
        if (b == 0) return assertEq(a, b); // If the left is 0, right must be too.

        uint256 percentDelta = stdMath.percentDelta(a, b);

        if (percentDelta > maxPercentDelta) {
            emit log("Error: a ~= b not satisfied [int]");
            emit log_named_int("        Left", a);
            emit log_named_int("       Right", b);
            emit log_named_decimal_uint(" Max % Delta", maxPercentDelta, 18);
            emit log_named_decimal_uint("     % Delta", percentDelta, 18);
            fail();
        }
    }

    function assertApproxEqRel(int256 a, int256 b, uint256 maxPercentDelta, string memory err) internal virtual {
        if (b == 0) return assertEq(a, b, err); // If the left is 0, right must be too.

        uint256 percentDelta = stdMath.percentDelta(a, b);

        if (percentDelta > maxPercentDelta) {
            emit log_named_string("Error", err);
            assertApproxEqRel(a, b, maxPercentDelta);
        }
    }

    function assertApproxEqRelDecimal(int256 a, int256 b, uint256 maxPercentDelta, uint256 decimals) internal virtual {
        if (b == 0) return assertEq(a, b); // If the left is 0, right must be too.

        uint256 percentDelta = stdMath.percentDelta(a, b);

        if (percentDelta > maxPercentDelta) {
            emit log("Error: a ~= b not satisfied [int]");
            emit log_named_decimal_int("        Left", a, decimals);
            emit log_named_decimal_int("       Right", b, decimals);
            emit log_named_decimal_uint(" Max % Delta", maxPercentDelta, 18);
            emit log_named_decimal_uint("     % Delta", percentDelta, 18);
            fail();
        }
    }

    function assertApproxEqRelDecimal(int256 a, int256 b, uint256 maxPercentDelta, uint256 decimals, string memory err)
        internal
        virtual
    {
        if (b == 0) return assertEq(a, b, err); // If the left is 0, right must be too.

        uint256 percentDelta = stdMath.percentDelta(a, b);

        if (percentDelta > maxPercentDelta) {
            emit log_named_string("Error", err);
            assertApproxEqRelDecimal(a, b, maxPercentDelta, decimals);
        }
    }

    function assertEqCall(address target, bytes memory callDataA, bytes memory callDataB) internal virtual {
        assertEqCall(target, callDataA, target, callDataB, true);
    }

    function assertEqCall(address targetA, bytes memory callDataA, address targetB, bytes memory callDataB)
        internal
        virtual
    {
        assertEqCall(targetA, callDataA, targetB, callDataB, true);
    }

    function assertEqCall(address target, bytes memory callDataA, bytes memory callDataB, bool strictRevertData)
        internal
        virtual
    {
        assertEqCall(target, callDataA, target, callDataB, strictRevertData);
    }

    function assertEqCall(
        address targetA,
        bytes memory callDataA,
        address targetB,
        bytes memory callDataB,
        bool strictRevertData
    ) internal virtual {
        (bool successA, bytes memory returnDataA) = address(targetA).call(callDataA);
        (bool successB, bytes memory returnDataB) = address(targetB).call(callDataB);

        if (successA && successB) {
            assertEq(returnDataA, returnDataB, "Call return data does not match");
        }

        if (!successA && !successB && strictRevertData) {
            assertEq(returnDataA, returnDataB, "Call revert data does not match");
        }

        if (!successA && successB) {
            emit log("Error: Calls were not equal");
            emit log_named_bytes("  Left call revert data", returnDataA);
            emit log_named_bytes(" Right call return data", returnDataB);
            fail();
        }

        if (successA && !successB) {
            emit log("Error: Calls were not equal");
            emit log_named_bytes("  Left call return data", returnDataA);
            emit log_named_bytes(" Right call revert data", returnDataB);
            fail();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.9.0;

pragma experimental ABIEncoderV2;

import {VmSafe} from "./Vm.sol";

/**
 * StdChains provides information about EVM compatible chains that can be used in scripts/tests.
 * For each chain, the chain's name, chain ID, and a default RPC URL are provided. Chains are
 * identified by their alias, which is the same as the alias in the `[rpc_endpoints]` section of
 * the `foundry.toml` file. For best UX, ensure the alias in the `foundry.toml` file match the
 * alias used in this contract, which can be found as the first argument to the
 * `setChainWithDefaultRpcUrl` call in the `initialize` function.
 *
 * There are two main ways to use this contract:
 *   1. Set a chain with `setChain(string memory chainAlias, ChainData memory chain)` or
 *      `setChain(string memory chainAlias, Chain memory chain)`
 *   2. Get a chain with `getChain(string memory chainAlias)` or `getChain(uint256 chainId)`.
 *
 * The first time either of those are used, chains are initialized with the default set of RPC URLs.
 * This is done in `initialize`, which uses `setChainWithDefaultRpcUrl`. Defaults are recorded in
 * `defaultRpcUrls`.
 *
 * The `setChain` function is straightforward, and it simply saves off the given chain data.
 *
 * The `getChain` methods use `getChainWithUpdatedRpcUrl` to return a chain. For example, let's say
 * we want to retrieve `mainnet`'s RPC URL:
 *   - If you haven't set any mainnet chain info with `setChain`, you haven't specified that
 *     chain in `foundry.toml` and no env var is set, the default data and RPC URL will be returned.
 *   - If you have set a mainnet RPC URL in `foundry.toml` it will return that, if valid (e.g. if
 *     a URL is given or if an environment variable is given and that environment variable exists).
 *     Otherwise, the default data is returned.
 *   - If you specified data with `setChain` it will return that.
 *
 * Summarizing the above, the prioritization hierarchy is `setChain` -> `foundry.toml` -> environment variable -> defaults.
 */
abstract contract StdChains {
    VmSafe private constant vm = VmSafe(address(uint160(uint256(keccak256("hevm cheat code")))));

    bool private initialized;

    struct ChainData {
        string name;
        uint256 chainId;
        string rpcUrl;
    }

    struct Chain {
        // The chain name.
        string name;
        // The chain's Chain ID.
        uint256 chainId;
        // The chain's alias. (i.e. what gets specified in `foundry.toml`).
        string chainAlias;
        // A default RPC endpoint for this chain.
        // NOTE: This default RPC URL is included for convenience to facilitate quick tests and
        // experimentation. Do not use this RPC URL for production test suites, CI, or other heavy
        // usage as you will be throttled and this is a disservice to others who need this endpoint.
        string rpcUrl;
    }

    // Maps from the chain's alias (matching the alias in the `foundry.toml` file) to chain data.
    mapping(string => Chain) private chains;
    // Maps from the chain's alias to it's default RPC URL.
    mapping(string => string) private defaultRpcUrls;
    // Maps from a chain ID to it's alias.
    mapping(uint256 => string) private idToAlias;

    bool private fallbackToDefaultRpcUrls = true;

    // The RPC URL will be fetched from config or defaultRpcUrls if possible.
    function getChain(string memory chainAlias) internal virtual returns (Chain memory chain) {
        require(bytes(chainAlias).length != 0, "StdChains getChain(string): Chain alias cannot be the empty string.");

        initialize();
        chain = chains[chainAlias];
        require(
            chain.chainId != 0,
            string(abi.encodePacked("StdChains getChain(string): Chain with alias \"", chainAlias, "\" not found."))
        );

        chain = getChainWithUpdatedRpcUrl(chainAlias, chain);
    }

    function getChain(uint256 chainId) internal virtual returns (Chain memory chain) {
        require(chainId != 0, "StdChains getChain(uint256): Chain ID cannot be 0.");
        initialize();
        string memory chainAlias = idToAlias[chainId];

        chain = chains[chainAlias];

        require(
            chain.chainId != 0,
            string(abi.encodePacked("StdChains getChain(uint256): Chain with ID ", vm.toString(chainId), " not found."))
        );

        chain = getChainWithUpdatedRpcUrl(chainAlias, chain);
    }

    // set chain info, with priority to argument's rpcUrl field.
    function setChain(string memory chainAlias, ChainData memory chain) internal virtual {
        require(
            bytes(chainAlias).length != 0,
            "StdChains setChain(string,ChainData): Chain alias cannot be the empty string."
        );

        require(chain.chainId != 0, "StdChains setChain(string,ChainData): Chain ID cannot be 0.");

        initialize();
        string memory foundAlias = idToAlias[chain.chainId];

        require(
            bytes(foundAlias).length == 0 || keccak256(bytes(foundAlias)) == keccak256(bytes(chainAlias)),
            string(
                abi.encodePacked(
                    "StdChains setChain(string,ChainData): Chain ID ",
                    vm.toString(chain.chainId),
                    " already used by \"",
                    foundAlias,
                    "\"."
                )
            )
        );

        uint256 oldChainId = chains[chainAlias].chainId;
        delete idToAlias[oldChainId];

        chains[chainAlias] =
            Chain({name: chain.name, chainId: chain.chainId, chainAlias: chainAlias, rpcUrl: chain.rpcUrl});
        idToAlias[chain.chainId] = chainAlias;
    }

    // set chain info, with priority to argument's rpcUrl field.
    function setChain(string memory chainAlias, Chain memory chain) internal virtual {
        setChain(chainAlias, ChainData({name: chain.name, chainId: chain.chainId, rpcUrl: chain.rpcUrl}));
    }

    function _toUpper(string memory str) private pure returns (string memory) {
        bytes memory strb = bytes(str);
        bytes memory copy = new bytes(strb.length);
        for (uint256 i = 0; i < strb.length; i++) {
            bytes1 b = strb[i];
            if (b >= 0x61 && b <= 0x7A) {
                copy[i] = bytes1(uint8(b) - 32);
            } else {
                copy[i] = b;
            }
        }
        return string(copy);
    }

    // lookup rpcUrl, in descending order of priority:
    // current -> config (foundry.toml) -> environment variable -> default
    function getChainWithUpdatedRpcUrl(string memory chainAlias, Chain memory chain) private returns (Chain memory) {
        if (bytes(chain.rpcUrl).length == 0) {
            try vm.rpcUrl(chainAlias) returns (string memory configRpcUrl) {
                chain.rpcUrl = configRpcUrl;
            } catch (bytes memory err) {
                string memory envName = string(abi.encodePacked(_toUpper(chainAlias), "_RPC_URL"));
                if (fallbackToDefaultRpcUrls) {
                    chain.rpcUrl = vm.envOr(envName, defaultRpcUrls[chainAlias]);
                } else {
                    chain.rpcUrl = vm.envString(envName);
                }
                // distinguish 'not found' from 'cannot read'
                bytes memory notFoundError =
                    abi.encodeWithSignature("CheatCodeError", string(abi.encodePacked("invalid rpc url ", chainAlias)));
                if (keccak256(notFoundError) != keccak256(err) || bytes(chain.rpcUrl).length == 0) {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, err), mload(err))
                    }
                }
            }
        }
        return chain;
    }

    function setFallbackToDefaultRpcUrls(bool useDefault) internal {
        fallbackToDefaultRpcUrls = useDefault;
    }

    function initialize() private {
        if (initialized) return;

        initialized = true;

        // If adding an RPC here, make sure to test the default RPC URL in `testRpcs`
        setChainWithDefaultRpcUrl("anvil", ChainData("Anvil", 31337, "http://127.0.0.1:8545"));
        setChainWithDefaultRpcUrl(
            "mainnet", ChainData("Mainnet", 1, "https://mainnet.infura.io/v3/f4a0bdad42674adab5fc0ac077ffab2b")
        );
        setChainWithDefaultRpcUrl(
            "goerli", ChainData("Goerli", 5, "https://goerli.infura.io/v3/f4a0bdad42674adab5fc0ac077ffab2b")
        );
        setChainWithDefaultRpcUrl(
            "sepolia", ChainData("Sepolia", 11155111, "https://sepolia.infura.io/v3/f4a0bdad42674adab5fc0ac077ffab2b")
        );
        setChainWithDefaultRpcUrl("optimism", ChainData("Optimism", 10, "https://mainnet.optimism.io"));
        setChainWithDefaultRpcUrl("optimism_goerli", ChainData("Optimism Goerli", 420, "https://goerli.optimism.io"));
        setChainWithDefaultRpcUrl("arbitrum_one", ChainData("Arbitrum One", 42161, "https://arb1.arbitrum.io/rpc"));
        setChainWithDefaultRpcUrl(
            "arbitrum_one_goerli", ChainData("Arbitrum One Goerli", 421613, "https://goerli-rollup.arbitrum.io/rpc")
        );
        setChainWithDefaultRpcUrl("arbitrum_nova", ChainData("Arbitrum Nova", 42170, "https://nova.arbitrum.io/rpc"));
        setChainWithDefaultRpcUrl("polygon", ChainData("Polygon", 137, "https://polygon-rpc.com"));
        setChainWithDefaultRpcUrl(
            "polygon_mumbai", ChainData("Polygon Mumbai", 80001, "https://rpc-mumbai.maticvigil.com")
        );
        setChainWithDefaultRpcUrl("avalanche", ChainData("Avalanche", 43114, "https://api.avax.network/ext/bc/C/rpc"));
        setChainWithDefaultRpcUrl(
            "avalanche_fuji", ChainData("Avalanche Fuji", 43113, "https://api.avax-test.network/ext/bc/C/rpc")
        );
        setChainWithDefaultRpcUrl(
            "bnb_smart_chain", ChainData("BNB Smart Chain", 56, "https://bsc-dataseed1.binance.org")
        );
        setChainWithDefaultRpcUrl(
            "bnb_smart_chain_testnet",
            ChainData("BNB Smart Chain Testnet", 97, "https://rpc.ankr.com/bsc_testnet_chapel")
        );
        setChainWithDefaultRpcUrl("gnosis_chain", ChainData("Gnosis Chain", 100, "https://rpc.gnosischain.com"));
    }

    // set chain info, with priority to chainAlias' rpc url in foundry.toml
    function setChainWithDefaultRpcUrl(string memory chainAlias, ChainData memory chain) private {
        string memory rpcUrl = chain.rpcUrl;
        defaultRpcUrls[chainAlias] = rpcUrl;
        chain.rpcUrl = "";
        setChain(chainAlias, chain);
        chain.rpcUrl = rpcUrl; // restore argument
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.9.0;

pragma experimental ABIEncoderV2;

import {StdStorage, stdStorage} from "./StdStorage.sol";
import {Vm} from "./Vm.sol";

abstract contract StdCheatsSafe {
    Vm private constant vm = Vm(address(uint160(uint256(keccak256("hevm cheat code")))));

    bool private gasMeteringOff;

    // Data structures to parse Transaction objects from the broadcast artifact
    // that conform to EIP1559. The Raw structs is what is parsed from the JSON
    // and then converted to the one that is used by the user for better UX.

    struct RawTx1559 {
        string[] arguments;
        address contractAddress;
        string contractName;
        // json value name = function
        string functionSig;
        bytes32 hash;
        // json value name = tx
        RawTx1559Detail txDetail;
        // json value name = type
        string opcode;
    }

    struct RawTx1559Detail {
        AccessList[] accessList;
        bytes data;
        address from;
        bytes gas;
        bytes nonce;
        address to;
        bytes txType;
        bytes value;
    }

    struct Tx1559 {
        string[] arguments;
        address contractAddress;
        string contractName;
        string functionSig;
        bytes32 hash;
        Tx1559Detail txDetail;
        string opcode;
    }

    struct Tx1559Detail {
        AccessList[] accessList;
        bytes data;
        address from;
        uint256 gas;
        uint256 nonce;
        address to;
        uint256 txType;
        uint256 value;
    }

    // Data structures to parse Transaction objects from the broadcast artifact
    // that DO NOT conform to EIP1559. The Raw structs is what is parsed from the JSON
    // and then converted to the one that is used by the user for better UX.

    struct TxLegacy {
        string[] arguments;
        address contractAddress;
        string contractName;
        string functionSig;
        string hash;
        string opcode;
        TxDetailLegacy transaction;
    }

    struct TxDetailLegacy {
        AccessList[] accessList;
        uint256 chainId;
        bytes data;
        address from;
        uint256 gas;
        uint256 gasPrice;
        bytes32 hash;
        uint256 nonce;
        bytes1 opcode;
        bytes32 r;
        bytes32 s;
        uint256 txType;
        address to;
        uint8 v;
        uint256 value;
    }

    struct AccessList {
        address accessAddress;
        bytes32[] storageKeys;
    }

    // Data structures to parse Receipt objects from the broadcast artifact.
    // The Raw structs is what is parsed from the JSON
    // and then converted to the one that is used by the user for better UX.

    struct RawReceipt {
        bytes32 blockHash;
        bytes blockNumber;
        address contractAddress;
        bytes cumulativeGasUsed;
        bytes effectiveGasPrice;
        address from;
        bytes gasUsed;
        RawReceiptLog[] logs;
        bytes logsBloom;
        bytes status;
        address to;
        bytes32 transactionHash;
        bytes transactionIndex;
    }

    struct Receipt {
        bytes32 blockHash;
        uint256 blockNumber;
        address contractAddress;
        uint256 cumulativeGasUsed;
        uint256 effectiveGasPrice;
        address from;
        uint256 gasUsed;
        ReceiptLog[] logs;
        bytes logsBloom;
        uint256 status;
        address to;
        bytes32 transactionHash;
        uint256 transactionIndex;
    }

    // Data structures to parse the entire broadcast artifact, assuming the
    // transactions conform to EIP1559.

    struct EIP1559ScriptArtifact {
        string[] libraries;
        string path;
        string[] pending;
        Receipt[] receipts;
        uint256 timestamp;
        Tx1559[] transactions;
        TxReturn[] txReturns;
    }

    struct RawEIP1559ScriptArtifact {
        string[] libraries;
        string path;
        string[] pending;
        RawReceipt[] receipts;
        TxReturn[] txReturns;
        uint256 timestamp;
        RawTx1559[] transactions;
    }

    struct RawReceiptLog {
        // json value = address
        address logAddress;
        bytes32 blockHash;
        bytes blockNumber;
        bytes data;
        bytes logIndex;
        bool removed;
        bytes32[] topics;
        bytes32 transactionHash;
        bytes transactionIndex;
        bytes transactionLogIndex;
    }

    struct ReceiptLog {
        // json value = address
        address logAddress;
        bytes32 blockHash;
        uint256 blockNumber;
        bytes data;
        uint256 logIndex;
        bytes32[] topics;
        uint256 transactionIndex;
        uint256 transactionLogIndex;
        bool removed;
    }

    struct TxReturn {
        string internalType;
        string value;
    }

    function assumeNoPrecompiles(address addr) internal virtual {
        // Assembly required since `block.chainid` was introduced in 0.8.0.
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        assumeNoPrecompiles(addr, chainId);
    }

    function assumeNoPrecompiles(address addr, uint256 chainId) internal pure virtual {
        // Note: For some chains like Optimism these are technically predeploys (i.e. bytecode placed at a specific
        // address), but the same rationale for excluding them applies so we include those too.

        // These should be present on all EVM-compatible chains.
        vm.assume(addr < address(0x1) || addr > address(0x9));

        // forgefmt: disable-start
        if (chainId == 10 || chainId == 420) {
            // https://github.com/ethereum-optimism/optimism/blob/eaa371a0184b56b7ca6d9eb9cb0a2b78b2ccd864/op-bindings/predeploys/addresses.go#L6-L21
            vm.assume(addr < address(0x4200000000000000000000000000000000000000) || addr > address(0x4200000000000000000000000000000000000800));
        } else if (chainId == 42161 || chainId == 421613) {
            // https://developer.arbitrum.io/useful-addresses#arbitrum-precompiles-l2-same-on-all-arb-chains
            vm.assume(addr < address(0x0000000000000000000000000000000000000064) || addr > address(0x0000000000000000000000000000000000000068));
        } else if (chainId == 43114 || chainId == 43113) {
            // https://github.com/ava-labs/subnet-evm/blob/47c03fd007ecaa6de2c52ea081596e0a88401f58/precompile/params.go#L18-L59
            vm.assume(addr < address(0x0100000000000000000000000000000000000000) || addr > address(0x01000000000000000000000000000000000000ff));
            vm.assume(addr < address(0x0200000000000000000000000000000000000000) || addr > address(0x02000000000000000000000000000000000000FF));
            vm.assume(addr < address(0x0300000000000000000000000000000000000000) || addr > address(0x03000000000000000000000000000000000000Ff));
        }
        // forgefmt: disable-end
    }

    function readEIP1559ScriptArtifact(string memory path)
        internal
        view
        virtual
        returns (EIP1559ScriptArtifact memory)
    {
        string memory data = vm.readFile(path);
        bytes memory parsedData = vm.parseJson(data);
        RawEIP1559ScriptArtifact memory rawArtifact = abi.decode(parsedData, (RawEIP1559ScriptArtifact));
        EIP1559ScriptArtifact memory artifact;
        artifact.libraries = rawArtifact.libraries;
        artifact.path = rawArtifact.path;
        artifact.timestamp = rawArtifact.timestamp;
        artifact.pending = rawArtifact.pending;
        artifact.txReturns = rawArtifact.txReturns;
        artifact.receipts = rawToConvertedReceipts(rawArtifact.receipts);
        artifact.transactions = rawToConvertedEIPTx1559s(rawArtifact.transactions);
        return artifact;
    }

    function rawToConvertedEIPTx1559s(RawTx1559[] memory rawTxs) internal pure virtual returns (Tx1559[] memory) {
        Tx1559[] memory txs = new Tx1559[](rawTxs.length);
        for (uint256 i; i < rawTxs.length; i++) {
            txs[i] = rawToConvertedEIPTx1559(rawTxs[i]);
        }
        return txs;
    }

    function rawToConvertedEIPTx1559(RawTx1559 memory rawTx) internal pure virtual returns (Tx1559 memory) {
        Tx1559 memory transaction;
        transaction.arguments = rawTx.arguments;
        transaction.contractName = rawTx.contractName;
        transaction.functionSig = rawTx.functionSig;
        transaction.hash = rawTx.hash;
        transaction.txDetail = rawToConvertedEIP1559Detail(rawTx.txDetail);
        transaction.opcode = rawTx.opcode;
        return transaction;
    }

    function rawToConvertedEIP1559Detail(RawTx1559Detail memory rawDetail)
        internal
        pure
        virtual
        returns (Tx1559Detail memory)
    {
        Tx1559Detail memory txDetail;
        txDetail.data = rawDetail.data;
        txDetail.from = rawDetail.from;
        txDetail.to = rawDetail.to;
        txDetail.nonce = _bytesToUint(rawDetail.nonce);
        txDetail.txType = _bytesToUint(rawDetail.txType);
        txDetail.value = _bytesToUint(rawDetail.value);
        txDetail.gas = _bytesToUint(rawDetail.gas);
        txDetail.accessList = rawDetail.accessList;
        return txDetail;
    }

    function readTx1559s(string memory path) internal view virtual returns (Tx1559[] memory) {
        string memory deployData = vm.readFile(path);
        bytes memory parsedDeployData = vm.parseJson(deployData, ".transactions");
        RawTx1559[] memory rawTxs = abi.decode(parsedDeployData, (RawTx1559[]));
        return rawToConvertedEIPTx1559s(rawTxs);
    }

    function readTx1559(string memory path, uint256 index) internal view virtual returns (Tx1559 memory) {
        string memory deployData = vm.readFile(path);
        string memory key = string(abi.encodePacked(".transactions[", vm.toString(index), "]"));
        bytes memory parsedDeployData = vm.parseJson(deployData, key);
        RawTx1559 memory rawTx = abi.decode(parsedDeployData, (RawTx1559));
        return rawToConvertedEIPTx1559(rawTx);
    }

    // Analogous to readTransactions, but for receipts.
    function readReceipts(string memory path) internal view virtual returns (Receipt[] memory) {
        string memory deployData = vm.readFile(path);
        bytes memory parsedDeployData = vm.parseJson(deployData, ".receipts");
        RawReceipt[] memory rawReceipts = abi.decode(parsedDeployData, (RawReceipt[]));
        return rawToConvertedReceipts(rawReceipts);
    }

    function readReceipt(string memory path, uint256 index) internal view virtual returns (Receipt memory) {
        string memory deployData = vm.readFile(path);
        string memory key = string(abi.encodePacked(".receipts[", vm.toString(index), "]"));
        bytes memory parsedDeployData = vm.parseJson(deployData, key);
        RawReceipt memory rawReceipt = abi.decode(parsedDeployData, (RawReceipt));
        return rawToConvertedReceipt(rawReceipt);
    }

    function rawToConvertedReceipts(RawReceipt[] memory rawReceipts) internal pure virtual returns (Receipt[] memory) {
        Receipt[] memory receipts = new Receipt[](rawReceipts.length);
        for (uint256 i; i < rawReceipts.length; i++) {
            receipts[i] = rawToConvertedReceipt(rawReceipts[i]);
        }
        return receipts;
    }

    function rawToConvertedReceipt(RawReceipt memory rawReceipt) internal pure virtual returns (Receipt memory) {
        Receipt memory receipt;
        receipt.blockHash = rawReceipt.blockHash;
        receipt.to = rawReceipt.to;
        receipt.from = rawReceipt.from;
        receipt.contractAddress = rawReceipt.contractAddress;
        receipt.effectiveGasPrice = _bytesToUint(rawReceipt.effectiveGasPrice);
        receipt.cumulativeGasUsed = _bytesToUint(rawReceipt.cumulativeGasUsed);
        receipt.gasUsed = _bytesToUint(rawReceipt.gasUsed);
        receipt.status = _bytesToUint(rawReceipt.status);
        receipt.transactionIndex = _bytesToUint(rawReceipt.transactionIndex);
        receipt.blockNumber = _bytesToUint(rawReceipt.blockNumber);
        receipt.logs = rawToConvertedReceiptLogs(rawReceipt.logs);
        receipt.logsBloom = rawReceipt.logsBloom;
        receipt.transactionHash = rawReceipt.transactionHash;
        return receipt;
    }

    function rawToConvertedReceiptLogs(RawReceiptLog[] memory rawLogs)
        internal
        pure
        virtual
        returns (ReceiptLog[] memory)
    {
        ReceiptLog[] memory logs = new ReceiptLog[](rawLogs.length);
        for (uint256 i; i < rawLogs.length; i++) {
            logs[i].logAddress = rawLogs[i].logAddress;
            logs[i].blockHash = rawLogs[i].blockHash;
            logs[i].blockNumber = _bytesToUint(rawLogs[i].blockNumber);
            logs[i].data = rawLogs[i].data;
            logs[i].logIndex = _bytesToUint(rawLogs[i].logIndex);
            logs[i].topics = rawLogs[i].topics;
            logs[i].transactionIndex = _bytesToUint(rawLogs[i].transactionIndex);
            logs[i].transactionLogIndex = _bytesToUint(rawLogs[i].transactionLogIndex);
            logs[i].removed = rawLogs[i].removed;
        }
        return logs;
    }

    // Deploy a contract by fetching the contract bytecode from
    // the artifacts directory
    // e.g. `deployCode(code, abi.encode(arg1,arg2,arg3))`
    function deployCode(string memory what, bytes memory args) internal virtual returns (address addr) {
        bytes memory bytecode = abi.encodePacked(vm.getCode(what), args);
        /// @solidity memory-safe-assembly
        assembly {
            addr := create(0, add(bytecode, 0x20), mload(bytecode))
        }

        require(addr != address(0), "StdCheats deployCode(string,bytes): Deployment failed.");
    }

    function deployCode(string memory what) internal virtual returns (address addr) {
        bytes memory bytecode = vm.getCode(what);
        /// @solidity memory-safe-assembly
        assembly {
            addr := create(0, add(bytecode, 0x20), mload(bytecode))
        }

        require(addr != address(0), "StdCheats deployCode(string): Deployment failed.");
    }

    /// @dev deploy contract with value on construction
    function deployCode(string memory what, bytes memory args, uint256 val) internal virtual returns (address addr) {
        bytes memory bytecode = abi.encodePacked(vm.getCode(what), args);
        /// @solidity memory-safe-assembly
        assembly {
            addr := create(val, add(bytecode, 0x20), mload(bytecode))
        }

        require(addr != address(0), "StdCheats deployCode(string,bytes,uint256): Deployment failed.");
    }

    function deployCode(string memory what, uint256 val) internal virtual returns (address addr) {
        bytes memory bytecode = vm.getCode(what);
        /// @solidity memory-safe-assembly
        assembly {
            addr := create(val, add(bytecode, 0x20), mload(bytecode))
        }

        require(addr != address(0), "StdCheats deployCode(string,uint256): Deployment failed.");
    }

    // creates a labeled address and the corresponding private key
    function makeAddrAndKey(string memory name) internal virtual returns (address addr, uint256 privateKey) {
        privateKey = uint256(keccak256(abi.encodePacked(name)));
        addr = vm.addr(privateKey);
        vm.label(addr, name);
    }

    // creates a labeled address
    function makeAddr(string memory name) internal virtual returns (address addr) {
        (addr,) = makeAddrAndKey(name);
    }

    function deriveRememberKey(string memory mnemonic, uint32 index)
        internal
        virtual
        returns (address who, uint256 privateKey)
    {
        privateKey = vm.deriveKey(mnemonic, index);
        who = vm.rememberKey(privateKey);
    }

    function _bytesToUint(bytes memory b) private pure returns (uint256) {
        require(b.length <= 32, "StdCheats _bytesToUint(bytes): Bytes length exceeds 32.");
        return abi.decode(abi.encodePacked(new bytes(32 - b.length), b), (uint256));
    }

    function isFork() internal view virtual returns (bool status) {
        try vm.activeFork() {
            status = true;
        } catch (bytes memory) {}
    }

    modifier skipWhenForking() {
        if (!isFork()) {
            _;
        }
    }

    modifier skipWhenNotForking() {
        if (isFork()) {
            _;
        }
    }

    modifier noGasMetering() {
        vm.pauseGasMetering();
        // To prevent turning gas monitoring back on with nested functions that use this modifier,
        // we check if gasMetering started in the off position. If it did, we don't want to turn
        // it back on until we exit the top level function that used the modifier
        //
        // i.e. funcA() noGasMetering { funcB() }, where funcB has noGasMetering as well.
        // funcA will have `gasStartedOff` as false, funcB will have it as true,
        // so we only turn metering back on at the end of the funcA
        bool gasStartedOff = gasMeteringOff;
        gasMeteringOff = true;

        _;

        // if gas metering was on when this modifier was called, turn it back on at the end
        if (!gasStartedOff) {
            gasMeteringOff = false;
            vm.resumeGasMetering();
        }
    }

    // a cheat for fuzzing addresses that are payable only
    // see https://github.com/foundry-rs/foundry/issues/3631
    function assumePayable(address addr) internal virtual {
        (bool success,) = payable(addr).call{value: 0}("");
        vm.assume(success);
    }
}

// Wrappers around cheatcodes to avoid footguns
abstract contract StdCheats is StdCheatsSafe {
    using stdStorage for StdStorage;

    StdStorage private stdstore;
    Vm private constant vm = Vm(address(uint160(uint256(keccak256("hevm cheat code")))));

    // Skip forward or rewind time by the specified number of seconds
    function skip(uint256 time) internal virtual {
        vm.warp(block.timestamp + time);
    }

    function rewind(uint256 time) internal virtual {
        vm.warp(block.timestamp - time);
    }

    // Setup a prank from an address that has some ether
    function hoax(address msgSender) internal virtual {
        vm.deal(msgSender, 1 << 128);
        vm.prank(msgSender);
    }

    function hoax(address msgSender, uint256 give) internal virtual {
        vm.deal(msgSender, give);
        vm.prank(msgSender);
    }

    function hoax(address msgSender, address origin) internal virtual {
        vm.deal(msgSender, 1 << 128);
        vm.prank(msgSender, origin);
    }

    function hoax(address msgSender, address origin, uint256 give) internal virtual {
        vm.deal(msgSender, give);
        vm.prank(msgSender, origin);
    }

    // Start perpetual prank from an address that has some ether
    function startHoax(address msgSender) internal virtual {
        vm.deal(msgSender, 1 << 128);
        vm.startPrank(msgSender);
    }

    function startHoax(address msgSender, uint256 give) internal virtual {
        vm.deal(msgSender, give);
        vm.startPrank(msgSender);
    }

    // Start perpetual prank from an address that has some ether
    // tx.origin is set to the origin parameter
    function startHoax(address msgSender, address origin) internal virtual {
        vm.deal(msgSender, 1 << 128);
        vm.startPrank(msgSender, origin);
    }

    function startHoax(address msgSender, address origin, uint256 give) internal virtual {
        vm.deal(msgSender, give);
        vm.startPrank(msgSender, origin);
    }

    function changePrank(address msgSender) internal virtual {
        vm.stopPrank();
        vm.startPrank(msgSender);
    }

    // The same as Vm's `deal`
    // Use the alternative signature for ERC20 tokens
    function deal(address to, uint256 give) internal virtual {
        vm.deal(to, give);
    }

    // Set the balance of an account for any ERC20 token
    // Use the alternative signature to update `totalSupply`
    function deal(address token, address to, uint256 give) internal virtual {
        deal(token, to, give, false);
    }

    // Set the balance of an account for any ERC1155 token
    // Use the alternative signature to update `totalSupply`
    function dealERC1155(address token, address to, uint256 id, uint256 give) internal virtual {
        dealERC1155(token, to, id, give, false);
    }

    function deal(address token, address to, uint256 give, bool adjust) internal virtual {
        // get current balance
        (, bytes memory balData) = token.call(abi.encodeWithSelector(0x70a08231, to));
        uint256 prevBal = abi.decode(balData, (uint256));

        // update balance
        stdstore.target(token).sig(0x70a08231).with_key(to).checked_write(give);

        // update total supply
        if (adjust) {
            (, bytes memory totSupData) = token.call(abi.encodeWithSelector(0x18160ddd));
            uint256 totSup = abi.decode(totSupData, (uint256));
            if (give < prevBal) {
                totSup -= (prevBal - give);
            } else {
                totSup += (give - prevBal);
            }
            stdstore.target(token).sig(0x18160ddd).checked_write(totSup);
        }
    }

    function dealERC1155(address token, address to, uint256 id, uint256 give, bool adjust) internal virtual {
        // get current balance
        (, bytes memory balData) = token.call(abi.encodeWithSelector(0x00fdd58e, to, id));
        uint256 prevBal = abi.decode(balData, (uint256));

        // update balance
        stdstore.target(token).sig(0x00fdd58e).with_key(to).with_key(id).checked_write(give);

        // update total supply
        if (adjust) {
            (, bytes memory totSupData) = token.call(abi.encodeWithSelector(0xbd85b039, id));
            require(
                totSupData.length != 0,
                "StdCheats deal(address,address,uint,uint,bool): target contract is not ERC1155Supply."
            );
            uint256 totSup = abi.decode(totSupData, (uint256));
            if (give < prevBal) {
                totSup -= (prevBal - give);
            } else {
                totSup += (give - prevBal);
            }
            stdstore.target(token).sig(0xbd85b039).with_key(id).checked_write(totSup);
        }
    }

    function dealERC721(address token, address to, uint256 id) internal virtual {
        // check if token id is already minted and the actual owner.
        (bool successMinted, bytes memory ownerData) = token.staticcall(abi.encodeWithSelector(0x6352211e, id));
        require(successMinted, "StdCheats deal(address,address,uint,bool): id not minted.");

        // get owner current balance
        (, bytes memory fromBalData) = token.call(abi.encodeWithSelector(0x70a08231, abi.decode(ownerData, (address))));
        uint256 fromPrevBal = abi.decode(fromBalData, (uint256));

        // get new user current balance
        (, bytes memory toBalData) = token.call(abi.encodeWithSelector(0x70a08231, to));
        uint256 toPrevBal = abi.decode(toBalData, (uint256));

        // update balances
        stdstore.target(token).sig(0x70a08231).with_key(abi.decode(ownerData, (address))).checked_write(--fromPrevBal);
        stdstore.target(token).sig(0x70a08231).with_key(to).checked_write(++toPrevBal);

        // update owner
        stdstore.target(token).sig(0x6352211e).with_key(id).checked_write(to);
    }
}

// SPDX-License-Identifier: MIT
// Panics work for versions >=0.8.0, but we lowered the pragma to make this compatible with Test
pragma solidity >=0.6.2 <0.9.0;

library stdError {
    bytes public constant assertionError = abi.encodeWithSignature("Panic(uint256)", 0x01);
    bytes public constant arithmeticError = abi.encodeWithSignature("Panic(uint256)", 0x11);
    bytes public constant divisionError = abi.encodeWithSignature("Panic(uint256)", 0x12);
    bytes public constant enumConversionError = abi.encodeWithSignature("Panic(uint256)", 0x21);
    bytes public constant encodeStorageError = abi.encodeWithSignature("Panic(uint256)", 0x22);
    bytes public constant popError = abi.encodeWithSignature("Panic(uint256)", 0x31);
    bytes public constant indexOOBError = abi.encodeWithSignature("Panic(uint256)", 0x32);
    bytes public constant memOverflowError = abi.encodeWithSignature("Panic(uint256)", 0x41);
    bytes public constant zeroVarError = abi.encodeWithSignature("Panic(uint256)", 0x51);
}