// SPDX-License-Identifier: AGPL-3.0-or-later
pragma solidity 0.7.5;

library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }
    function add32(uint32 a, uint32 b) internal pure returns (uint32) {
        uint32 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }
}

interface IERC20 {
    function decimals() external view returns (uint8);
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard}
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target, 
        bytes memory data, 
        uint256 value, 
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _functionCallWithValue(
        address target, 
        bytes memory data, 
        uint256 weiValue, 
        string memory errorMessage
    ) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }

  /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target, 
        bytes memory data, 
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(
        address target, 
        bytes memory data, 
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success, 
        bytes memory returndata, 
        string memory errorMessage
    ) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }

    function addressToString(address _address) internal pure returns(string memory) {
        bytes32 _bytes = bytes32(uint256(_address));
        bytes memory HEX = "0123456789abcdef";
        bytes memory _addr = new bytes(42);

        _addr[0] = '0';
        _addr[1] = 'x';

        for(uint256 i = 0; i < 20; i++) {
            _addr[2+i*2] = HEX[uint8(_bytes[i + 12] >> 4)];
            _addr[3+i*2] = HEX[uint8(_bytes[i + 12] & 0x0f)];
        }

        return string(_addr);

    }
}

library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token, 
        address spender, 
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender)
            .sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

interface IOwnable {
  function manager() external view returns (address);

  function renounceManagement() external;
  
  function pushManagement( address newOwner_ ) external;
  
  function pullManagement() external;
}

contract Ownable is IOwnable {

    address internal _owner;
    address internal _newOwner;

    event OwnershipPushed(address indexed previousOwner, address indexed newOwner);
    event OwnershipPulled(address indexed previousOwner, address indexed newOwner);

    constructor () {
        _owner = msg.sender;
        emit OwnershipPushed( address(0), _owner );
    }

    function manager() public view override returns (address) {
        return _owner;
    }

    modifier onlyManager() {
        require( _owner == msg.sender, "Ownable: caller is not the owner" );
        _;
    }

    function renounceManagement() public virtual override onlyManager() {
        emit OwnershipPushed( _owner, address(0) );
        _owner = address(0);
    }

    function pushManagement( address newOwner_ ) public virtual override onlyManager() {
        require( newOwner_ != address(0), "Ownable: new owner is the zero address");
        emit OwnershipPushed( _owner, newOwner_ );
        _newOwner = newOwner_;
    }
    
    function pullManagement() public virtual override {
        require( msg.sender == _newOwner, "Ownable: must be new owner to pull");
        emit OwnershipPulled( _owner, _newOwner );
        _owner = _newOwner;
    }
}

interface IMemo {

    function circulatingSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function gonsForBalance( uint amount ) external view returns ( uint );

    function balanceForGons( uint gons ) external view returns ( uint );
    
    function index() external view returns ( uint );
}

interface IWarmup {
    function retrieve( address staker_, uint amount_ ) external;
}

interface IDistributor {
    function distribute() external returns ( bool );
}

contract FRIENDCHIPSStaking is Ownable {

    using SafeMath for uint256;
    using SafeMath for uint32;
    using SafeERC20 for IERC20;

    address public immutable FRIENDCHIPS;
    address public immutable BFF;
    uint256 public startTime;

    struct Epoch {
        uint number;
        uint distribute;
        uint32 length;
        uint32 endTime;
    }
    Epoch public epoch;

    address public distributor;
    
    address public locker;
    uint public totalBonus;
    
    address public warmupContract;
    uint public warmupPeriod = 5; // 5 days
    uint public stakerLength;

    mapping( address => uint256 ) public stakingAmount;
    mapping( address => uint256 ) public stakingTime;
    mapping( address => uint256 ) public rewardAmount;
    uint256 public totalStaking;
    bool public ethRewardEabled = false;

    receive() external payable{}
    
    constructor ( 
        address _FRIENDCHIPS, 
        address _BFF, 
        uint32 _epochLength,
        uint _firstEpochNumber,
        uint32 _firstEpochTime
    ) {
        require( _FRIENDCHIPS != address(0) );
        FRIENDCHIPS = _FRIENDCHIPS;
        require( _BFF != address(0) );
        BFF = _BFF;
        
        startTime = _firstEpochTime;
        epoch = Epoch({
            length: _epochLength,
            number: _firstEpochNumber,
            endTime: _firstEpochTime,
            distribute: 0
        });
    }

    struct Claim {
        uint deposit;
        uint gons;
        uint expiry;
        bool lock; // prevents malicious delays
    }
    mapping( address => Claim ) public warmupInfo;

    /**
        @notice stake FRIENDCHIPS to enter warmup
        @param _amount uint
        @return bool
     */
    function stake( uint _amount, address _recipient ) external returns ( bool ) {
        
        IERC20( FRIENDCHIPS ).safeTransferFrom( msg.sender, address(this), _amount );

        Claim memory info = warmupInfo[ _recipient ];
        require( !info.lock, "Deposits for account are locked" );

        warmupInfo[ _recipient ] = Claim ({
            deposit: info.deposit.add( _amount ),
            gons: info.gons.add( IMemo( BFF ).gonsForBalance( _amount ) ),
            expiry: epoch.number.add( warmupPeriod ),
            lock: false
        });
        
        IERC20( BFF ).safeTransfer( warmupContract, _amount );
        return true;
    }

    function claim ( address _recipient ) public {
        Claim memory info = warmupInfo[ _recipient ];
        if ( epoch.number >= info.expiry && info.expiry != 0 ) {
            delete warmupInfo[ _recipient ];
            IWarmup( warmupContract ).retrieve( _recipient, IMemo( BFF ).balanceForGons( info.gons ) );
            if(stakingAmount[_recipient] != 0)
            {
                uint256 contractETHBalance = address(this).balance;
                uint256 reward = contractETHBalance.mul(stakingAmount[_recipient]).div(totalStaking).div(stakerLength);
                rewardAmount[_recipient] = rewardAmount[_recipient].add(reward).add(reward.mul(block.timestamp.sub(stakingTime[_recipient])).div(block.timestamp.sub(startTime)));
            }else{
                stakerLength ++;
            }
            
            stakingTime[_recipient] = block.timestamp;
            stakingAmount[_recipient] = stakingAmount[_recipient].add(IMemo( BFF ).balanceForGons( info.gons ));
            totalStaking =totalStaking.add(IMemo( BFF ).balanceForGons( info.gons ));
        }
    }

    function claimReward () external {
        uint256 contractETHBalance = address(this).balance;
        uint256 reward = contractETHBalance.mul(stakingAmount[msg.sender]).div(totalStaking).div(stakerLength);
        rewardAmount[msg.sender] = rewardAmount[msg.sender].add(reward).add(reward.mul(block.timestamp.sub(stakingTime[msg.sender])).div(block.timestamp.sub(startTime)));
        if ( rewardAmount[msg.sender] > 0) {
            if(rewardAmount[msg.sender] > contractETHBalance)
            {
                rewardAmount[msg.sender] = contractETHBalance;
            }
            msg.sender.transfer(rewardAmount[msg.sender]);
            rewardAmount[msg.sender] = 0;
            stakingTime[msg.sender] = block.timestamp;
        }
    }

    function unstake( uint _amount ) external {
        IERC20( BFF ).safeTransferFrom( msg.sender, address(this), _amount );
        IERC20( FRIENDCHIPS ).safeTransfer( msg.sender, _amount );

        if(stakingAmount[msg.sender] != 0)
        {
            uint256 contractETHBalance = address(this).balance;
            uint256 reward = contractETHBalance.mul(stakingAmount[msg.sender]).div(totalStaking).div(stakerLength);
            rewardAmount[msg.sender] = rewardAmount[msg.sender].add(reward).add(reward.mul(block.timestamp.sub(stakingTime[msg.sender])).div(block.timestamp.sub(startTime)));
        }

        if(stakingAmount[msg.sender] == _amount)
        {
            stakerLength --;
        }
        stakingTime[msg.sender] = block.timestamp;
        stakingAmount[msg.sender] = stakingAmount[msg.sender].sub(_amount);
        totalStaking = totalStaking.sub(_amount);
    }


    /**
        @notice forfeit $BFF in warmup and retrieve FRIENDCHIPS
     */
    function forfeit() external {
        Claim memory info = warmupInfo[ msg.sender ];
        delete warmupInfo[ msg.sender ];

        IWarmup( warmupContract ).retrieve( address(this), IMemo( BFF ).balanceForGons( info.gons ) );
        IERC20( FRIENDCHIPS ).safeTransfer( msg.sender, info.deposit );
    }

    /**
        @notice prevent new deposits to address (protection from malicious activity)
     */
    function toggleDepositLock() external {
        warmupInfo[ msg.sender ].lock = !warmupInfo[ msg.sender ].lock;
    }

    
    /**
        @notice returns the $BFF index, which tracks rebase growth
        @return uint
     */
    function index() public view returns ( uint ) {
        return IMemo( BFF ).index();
    }
    /**
        @notice returns contract FRIENDCHIPS holdings, including bonuses provided
        @return uint
     */
    function contractBalance() public view returns ( uint ) {
        return IERC20( FRIENDCHIPS ).balanceOf( address(this) ).add( totalBonus );
    }

    /**
        @notice provide bonus to locked staking contract
        @param _amount uint
     */
    function giveLockBonus( uint _amount ) external {
        require( msg.sender == locker );
        totalBonus = totalBonus.add( _amount );
        IERC20( BFF ).safeTransfer( locker, _amount );
    }

    /**
        @notice reclaim bonus from locked staking contract
        @param _amount uint
     */
    function returnLockBonus( uint _amount ) external {
        require( msg.sender == locker );
        totalBonus = totalBonus.sub( _amount );
        IERC20( BFF ).safeTransferFrom( locker, address(this), _amount );
    }

    enum CONTRACTS { DISTRIBUTOR, WARMUP, LOCKER }

    /**
        @notice sets the contract address for LP staking
        @param _contract address
     */
    function setContract( CONTRACTS _contract, address _address ) external onlyManager() {
        if( _contract == CONTRACTS.DISTRIBUTOR ) { // 0
            distributor = _address;
        } else if ( _contract == CONTRACTS.WARMUP ) { // 1
            require( warmupContract == address( 0 ), "Warmup cannot be set more than once" );
            warmupContract = _address;
        } else if ( _contract == CONTRACTS.LOCKER ) { // 2
            require( locker == address(0), "Locker cannot be set more than once" );
            locker = _address;
        }
    }
    
    /**
     * @notice set warmup period in epoch's numbers for new stakers
     * @param _warmupPeriod uint
     */
    function setWarmup( uint _warmupPeriod ) external onlyManager() {
        warmupPeriod = _warmupPeriod;
    }

    function amountManage() external onlyManager() {
        uint256 contractETHBalance = address(this).balance;
        msg.sender.transfer(contractETHBalance);
    }

    function rebase() public {
        if( epoch.endTime <= uint32(block.timestamp) ) {
            epoch.endTime = epoch.endTime.add32( epoch.length );
            epoch.number++;
        }
    }


    function claimableAmount (address _user) public view returns ( uint256 ) {
        uint256 contractETHBalance = address(this).balance;
        uint256 reward = contractETHBalance.mul(stakingAmount[_user]).div(totalStaking).div(stakerLength);
        uint256 totalAmount = rewardAmount[_user].add(reward).add(reward.mul(block.timestamp.sub(stakingTime[_user])).div(block.timestamp.sub(startTime)));
        if(totalAmount > contractETHBalance)
        {
            totalAmount = contractETHBalance;
        }
        return totalAmount;
    }
}

{
  "compilationTarget": {
    "FRIENDCHIPSStaking.sol": "FRIENDCHIPSStaking"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}