// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/utils/math/Math.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

// Proof of a witnessed event by CENNZnet validators
struct CENNZnetEventProof {
    // The Id (nonce) of the event
    uint256 eventId;
    // The validator set Id which witnessed the event
    uint32 validatorSetId;
    // v,r,s are sparse arrays expected to align w public key in 'validators'
    // i.e. v[i], r[i], s[i] matches the i-th validator[i]
    // v part of validator signatures
    uint8[] v;
    // r part of validator signatures
    bytes32[] r;
    // s part of validator signatures
    bytes32[] s;
    // The validator addresses
    address[] validators;
}

// Provides methods for verifying messages from the CENNZnet validator set
contract CENNZnetBridge is Ownable {
    // map from validator set nonce to keccak256 digest of validator ECDSA addresses (i.e bridge session keys)
    // these should be encoded in sorted order matching `pallet_session::Module<T>::validators()` to create the digest
    // signatures from a threshold of these addresses are considered approved by the CENNZnet protocol
    mapping(uint => bytes32) public validatorSetDigests;
    // Nonce for validator set changes
    uint32 public activeValidatorSetId;
    // Message nonces.
    // CENNZnet will only validate one message per nonce.
    // Claiming out of order is ok.
    mapping(uint => bool) public eventIds;
    // Fee for CENNZnet message verification
    // Offsets bridge upkeep costs i.e updating the validator set
    uint public verificationFee = 1e15;
    // Acceptance threshold in %
    uint public thresholdPercent = 60;
    // Number of eras before a bridge message will be considered expired
    uint public proofTTL = 3;
    // Whether the bridge is active or not
    bool public active = true;
    // Max reward paid out to successful caller of `setValidator`
    uint public maxRewardPayout = 1e18;

    event SetValidators(bytes32 validatorSetDigest, uint reward, uint32 validatorSetId);

    // Verify a message was authorised by CENNZnet validators.
    // Callable by anyone.
    // Caller must provide `verificationFee`.
    // Requires signatures from a threshold CENNZnet validators at proof.validatorSetId.
    // Requires proof is not older than `proofTTL` eras
    // Halts on failure
    //
    // Parameters:
    // - message: the unhashed message data packed wide w validatorSetId & eventId e.g. `abi.encode(arg0, arg2, validatorSetId, eventId);`
    // - proof: Signed witness material generated by CENNZnet proving 'message'
    function verifyMessage(bytes calldata message, CENNZnetEventProof calldata proof) payable external {
        require(active, "bridge inactive");
        uint256 eventId = proof.eventId;
        require(!eventIds[eventId], "eventId replayed");
        require(msg.value >= verificationFee || msg.sender == address(this), "must supply verification fee");
        uint32 validatorSetId = proof.validatorSetId;
        require(validatorSetId <= activeValidatorSetId, "future validator set");
        require(activeValidatorSetId - validatorSetId <= proofTTL, "expired proof");
        address[] memory _validators = proof.validators;
        // audit item #1
        require(_validators.length > 0, "invalid validator set");
        require(keccak256(abi.encode(_validators)) == validatorSetDigests[validatorSetId], "unexpected validator digest");

        bytes32 digest = keccak256(message);
        uint acceptanceTreshold = (_validators.length * thresholdPercent / 100);
        uint witnessCount;
        bytes32 ommited;

        for (uint i; i < _validators.length; i++) {
            // check signature omitted == bytes32(0)
            if(proof.r[i] != ommited) {
                // check signature
                require(_validators[i] == ecrecover(digest, proof.v[i], proof.r[i], proof.s[i]), "signature invalid");
                witnessCount += 1;
                // have we got proven consensus?
                if(witnessCount >= acceptanceTreshold) {
                    break;
                }
            }
        }

        require(witnessCount >= acceptanceTreshold, "not enough signatures");
        eventIds[eventId] = true;
    }

    // Update the known CENNZnet validator set
    //
    // Requires signatures from a threshold of current CENNZnet validators
    // v,r,s are sparse arrays expected to align w addresses / public key in 'validators'
    // i.e. v[i], r[i], s[i] matches the i-th validator[i]
    function setValidators(
        address[] calldata newValidators,
        uint32 newValidatorSetId,
        CENNZnetEventProof calldata proof
    ) external payable {
        require(newValidators.length > 0, "empty validator set");
        require(newValidatorSetId > activeValidatorSetId , "validator set id replayed");

        bytes memory message = abi.encode(newValidators, newValidatorSetId, proof.validatorSetId, proof.eventId);
        this.verifyMessage(message, proof);

        // update set digest and active id
        bytes32 validatorSetDigest = keccak256(abi.encode(newValidators));
        validatorSetDigests[newValidatorSetId] = validatorSetDigest;
        activeValidatorSetId = newValidatorSetId;

        // return accumulated fees to the sender as a reward, capped at `maxRewardPayout`
        uint reward = Math.min(address(this).balance, maxRewardPayout);
        (bool sent, ) = msg.sender.call{value: reward}("");
        require(sent, "Failed to send Ether");

        emit SetValidators(validatorSetDigest, reward, newValidatorSetId);
    }

    // Admin functions

    // force set the active CENNZnet validator set
    function forceActiveValidatorSet(address[] calldata _validators, uint32 validatorSetId) external onlyOwner {
        require(_validators.length > 0, "empty validator set");
        require(validatorSetId >= activeValidatorSetId, "set is historic");
        validatorSetDigests[validatorSetId] = keccak256(abi.encode(_validators));
        activeValidatorSetId = validatorSetId;
    }

    // Force set a historic CENNZnet validator set
    // Sets older than proofTTL are not modifiable (since they cannot produce valid proofs any longer)
    function forceHistoricValidatorSet(address[] calldata _validators, uint32 validatorSetId) external onlyOwner {
        require(_validators.length > 0, "empty validator set");
        require(validatorSetId + proofTTL > activeValidatorSetId, "set is inactive");
        validatorSetDigests[validatorSetId] = keccak256(abi.encode(_validators));
    }

    // Set the TTL for historic validator set proofs
    function setProofTTL(uint newTTL) external onlyOwner {
        proofTTL = newTTL;
    }

    // Set the max reward payout for `setValidator` incentive
    function setMaxRewardPayout(uint newMaxRewardPayout) external onlyOwner {
        maxRewardPayout = newMaxRewardPayout;
    }

    // Set the fee for verify messages
    function setVerificationFee(uint newFee) external onlyOwner {
        verificationFee = newFee;
    }

    // Set the threshold % required for proof verification
    function setThreshold(uint newThresholdPercent) external onlyOwner {
        require(newThresholdPercent <= 100, "percent must be <= 100");
        thresholdPercent = newThresholdPercent;
    }

    // Activate/deactivate the bridge
    function setActive(bool active_) external onlyOwner {
        active = active_;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

import "./CENNZnetBridge.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

// Provides an Eth/ERC20/GA CENNZnet peg
// - depositing: lock Eth/ERC20 tokens to redeem CENNZnet "generic asset" 1:1
// - withdrawing: burn or lock GAs to redeem Eth/ERC20 tokens 1:1
contract ERC20Peg is Ownable {
    using SafeMath for uint256;
    // whether the peg is accepting deposits
    bool public depositsActive;
    // whether CENNZ deposists are on
    bool public cennzDepositsActive;
    // whether the peg is accepting withdrawals
    bool public withdrawalsActive;
    // CENNZnet bridge contract address
    CENNZnetBridge public bridge;
    // Reserved address for native Eth deposits/withdraw
    address constant public ETH_RESERVED_TOKEN_ADDRESS = address(0);
    // CENNZ ERC20 contract address
    address constant public CENNZ_TOKEN_ADDRESS = 0x1122B6a0E00DCe0563082b6e2953f3A943855c1F;

    constructor(address _bridge) {
        bridge = CENNZnetBridge(_bridge);
    }

    event Endow(uint256 amount);
    event Deposit(address indexed, address tokenType, uint256 amount, bytes32 cennznetAddress);
    event Withdraw(address indexed, address tokenType, uint256 amount);

    // Deposit amount of tokenType the pegged version of the token will be claim-able on CENNZnet.
    // tokenType '0' is reserved for native Eth
    function deposit(address tokenType, uint256 amount, bytes32 cennznetAddress) payable external {
        require(depositsActive, "deposits paused");
        require(cennznetAddress != bytes32(0), "invalid CENNZnet address");

        if (tokenType == ETH_RESERVED_TOKEN_ADDRESS) {
            require(msg.value == amount, "incorrect deposit amount");
        } else {
            // CENNZ deposits will require a vote to activate
            if (tokenType == CENNZ_TOKEN_ADDRESS) {
                require(cennzDepositsActive, "cennz deposits paused");
            }
            SafeERC20.safeTransferFrom(IERC20(tokenType), msg.sender, address(this), amount);
        }

        emit Deposit(msg.sender, tokenType, amount, cennznetAddress);
    }

    // Withdraw tokens from this contract
    // tokenType '0' is reserved for native Eth
    // Requires signatures from a threshold of current CENNZnet validators
    // v,r,s are sparse arrays expected to align w public key in 'validators'
    // i.e. v[i], r[i], s[i] matches the i-th validator[i]
    function withdraw(address tokenType, uint256 amount, address recipient, CENNZnetEventProof calldata proof) payable external {
        require(withdrawalsActive, "withdrawals paused");
        bytes memory message = abi.encode(tokenType, amount, recipient, proof.validatorSetId, proof.eventId);
        bridge.verifyMessage{ value: msg.value }(message, proof);

        if (tokenType == ETH_RESERVED_TOKEN_ADDRESS) {
            (bool sent, ) = recipient.call{value: amount}("");
            require(sent, "Failed to send Ether");
        } else {
            SafeERC20.safeTransfer(IERC20(tokenType), recipient, amount);
        }

        emit Withdraw(recipient, tokenType, amount);
    }

    function endow() external onlyOwner payable {
        require(msg.value > 0, "must endow nonzero");
        emit Endow(msg.value);
    }

    function activateCENNZDeposits() external onlyOwner {
        cennzDepositsActive = true;
    }

    function activateDeposits() external onlyOwner {
        depositsActive = true;
    }

    function pauseDeposits() external onlyOwner {
        depositsActive = false;
    }

    function activateWithdrawals() external onlyOwner {
        withdrawalsActive = true;
    }

    function pauseWithdrawals() external onlyOwner {
        withdrawalsActive = false;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a / b + (a % b == 0 ? 0 : 1);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

{
  "compilationTarget": {
    "contracts/ERC20Peg.sol": "ERC20Peg"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}