// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   *
   * [IMPORTANT]
   * ====
   * You shouldn't rely on `isContract` to protect against flash loan attacks!
   *
   * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
   * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
   * constructor.
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize/address.code.length, which returns 0
    // for contracts in construction, since the code is only stored at the end
    // of the constructor execution.

    return account.code.length > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, "Address: insufficient balance");

    (bool success, ) = recipient.call{value: amount}("");
    require(success, "Address: unable to send value, recipient may have reverted");
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain `call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, "Address: low-level call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, "Address: insufficient balance for call");
    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
    return functionStaticCall(target, data, "Address: low-level static call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    (bool success, bytes memory returndata) = target.staticcall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, "Address: low-level delegate call failed");
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return verifyCallResultFromTarget(target, success, returndata, errorMessage);
  }

  /**
   * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
   * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
   *
   * _Available since v4.8._
   */
  function verifyCallResultFromTarget(
    address target,
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    if (success) {
      if (returndata.length == 0) {
        // only check isContract if the call was successful and the return data is empty
        // otherwise we already know that it was a contract
        require(isContract(target), "Address: call to non-contract");
      }
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  /**
   * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
   * revert reason or using the provided one.
   *
   * _Available since v4.3._
   */
  function verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) internal pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      _revert(returndata, errorMessage);
    }
  }

  function _revert(bytes memory returndata, string memory errorMessage) private pure {
    // Look for revert reason and bubble it up if present
    if (returndata.length > 0) {
      // The easiest way to bubble the revert reason is using memory via assembly
      /// @solidity memory-safe-assembly
      assembly {
        let returndata_size := mload(returndata)
        revert(add(32, returndata), returndata_size)
      }
    } else {
      revert(errorMessage);
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

// End consumer library.
library Client {
  /// @dev RMN depends on this struct, if changing, please notify the RMN maintainers.
  struct EVMTokenAmount {
    address token; // token address on the local chain.
    uint256 amount; // Amount of tokens.
  }

  struct Any2EVMMessage {
    bytes32 messageId; // MessageId corresponding to ccipSend on source.
    uint64 sourceChainSelector; // Source chain selector.
    bytes sender; // abi.decode(sender) if coming from an EVM chain.
    bytes data; // payload sent in original message.
    EVMTokenAmount[] destTokenAmounts; // Tokens and their amounts in their destination chain representation.
  }

  // If extraArgs is empty bytes, the default is 200k gas limit.
  struct EVM2AnyMessage {
    bytes receiver; // abi.encode(receiver address) for dest EVM chains
    bytes data; // Data payload
    EVMTokenAmount[] tokenAmounts; // Token transfers
    address feeToken; // Address of feeToken. address(0) means you will send msg.value.
    bytes extraArgs; // Populate this with _argsToBytes(EVMExtraArgsV1)
  }

  // bytes4(keccak256("CCIP EVMExtraArgsV1"));
  bytes4 public constant EVM_EXTRA_ARGS_V1_TAG = 0x97a657c9;
  struct EVMExtraArgsV1 {
    uint256 gasLimit;
  }

  function _argsToBytes(EVMExtraArgsV1 memory extraArgs) internal pure returns (bytes memory bts) {
    return abi.encodeWithSelector(EVM_EXTRA_ARGS_V1_TAG, extraArgs);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfirmedOwnerWithProposal} from "./ConfirmedOwnerWithProposal.sol";

/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwner is ConfirmedOwnerWithProposal {
  constructor(address newOwner) ConfirmedOwnerWithProposal(newOwner, address(0)) {}
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IOwnable} from "../interfaces/IOwnable.sol";

/// @title The ConfirmedOwner contract
/// @notice A contract with helpers for basic contract ownership.
contract ConfirmedOwnerWithProposal is IOwnable {
  address private s_owner;
  address private s_pendingOwner;

  event OwnershipTransferRequested(address indexed from, address indexed to);
  event OwnershipTransferred(address indexed from, address indexed to);

  constructor(address newOwner, address pendingOwner) {
    // solhint-disable-next-line custom-errors
    require(newOwner != address(0), "Cannot set owner to zero");

    s_owner = newOwner;
    if (pendingOwner != address(0)) {
      _transferOwnership(pendingOwner);
    }
  }

  /// @notice Allows an owner to begin transferring ownership to a new address.
  function transferOwnership(address to) public override onlyOwner {
    _transferOwnership(to);
  }

  /// @notice Allows an ownership transfer to be completed by the recipient.
  function acceptOwnership() external override {
    // solhint-disable-next-line custom-errors
    require(msg.sender == s_pendingOwner, "Must be proposed owner");

    address oldOwner = s_owner;
    s_owner = msg.sender;
    s_pendingOwner = address(0);

    emit OwnershipTransferred(oldOwner, msg.sender);
  }

  /// @notice Get the current owner
  function owner() public view override returns (address) {
    return s_owner;
  }

  /// @notice validate, transfer ownership, and emit relevant events
  function _transferOwnership(address to) private {
    // solhint-disable-next-line custom-errors
    require(to != msg.sender, "Cannot transfer to self");

    s_pendingOwner = to;

    emit OwnershipTransferRequested(s_owner, to);
  }

  /// @notice validate access
  function _validateOwnership() internal view {
    // solhint-disable-next-line custom-errors
    require(msg.sender == s_owner, "Only callable by owner");
  }

  /// @notice Reverts if called by anyone other than the contract owner.
  modifier onlyOwner() {
    _validateOwnership();
    _;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
 * unusable.
 * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
 * array of EnumerableSet.
 * ====
 */
library EnumerableSet {
  // To implement this library for multiple types with as little code
  // repetition as possible, we write it in terms of a generic Set type with
  // bytes32 values.
  // The Set implementation uses private functions, and user-facing
  // implementations (such as AddressSet) are just wrappers around the
  // underlying Set.
  // This means that we can only create new EnumerableSets for types that fit
  // in bytes32.

  struct Set {
    // Storage of set values
    bytes32[] _values;
    // Position of the value in the `values` array, plus 1 because index 0
    // means a value is not in the set.
    mapping(bytes32 => uint256) _indexes;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function _add(Set storage set, bytes32 value) private returns (bool) {
    if (!_contains(set, value)) {
      set._values.push(value);
      // The value is stored at length-1, but we add 1 to all indexes
      // and use 0 as a sentinel value
      set._indexes[value] = set._values.length;
      return true;
    } else {
      return false;
    }
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function _remove(Set storage set, bytes32 value) private returns (bool) {
    // We read and store the value's index to prevent multiple reads from the same storage slot
    uint256 valueIndex = set._indexes[value];

    if (valueIndex != 0) {
      // Equivalent to contains(set, value)
      // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
      // the array, and then remove the last element (sometimes called as 'swap and pop').
      // This modifies the order of the array, as noted in {at}.

      uint256 toDeleteIndex = valueIndex - 1;
      uint256 lastIndex = set._values.length - 1;

      if (lastIndex != toDeleteIndex) {
        bytes32 lastValue = set._values[lastIndex];

        // Move the last value to the index where the value to delete is
        set._values[toDeleteIndex] = lastValue;
        // Update the index for the moved value
        set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
      }

      // Delete the slot where the moved value was stored
      set._values.pop();

      // Delete the index for the deleted slot
      delete set._indexes[value];

      return true;
    } else {
      return false;
    }
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function _contains(Set storage set, bytes32 value) private view returns (bool) {
    return set._indexes[value] != 0;
  }

  /**
   * @dev Returns the number of values on the set. O(1).
   */
  function _length(Set storage set) private view returns (uint256) {
    return set._values.length;
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function _at(Set storage set, uint256 index) private view returns (bytes32) {
    return set._values[index];
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function _values(Set storage set) private view returns (bytes32[] memory) {
    return set._values;
  }

  // Bytes32Set

  struct Bytes32Set {
    Set _inner;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
    return _add(set._inner, value);
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
    return _remove(set._inner, value);
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
    return _contains(set._inner, value);
  }

  /**
   * @dev Returns the number of values in the set. O(1).
   */
  function length(Bytes32Set storage set) internal view returns (uint256) {
    return _length(set._inner);
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
    return _at(set._inner, index);
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
    bytes32[] memory store = _values(set._inner);
    bytes32[] memory result;

    /// @solidity memory-safe-assembly
    assembly {
      result := store
    }

    return result;
  }

  // AddressSet

  struct AddressSet {
    Set _inner;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function add(AddressSet storage set, address value) internal returns (bool) {
    return _add(set._inner, bytes32(uint256(uint160(value))));
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function remove(AddressSet storage set, address value) internal returns (bool) {
    return _remove(set._inner, bytes32(uint256(uint160(value))));
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function contains(AddressSet storage set, address value) internal view returns (bool) {
    return _contains(set._inner, bytes32(uint256(uint160(value))));
  }

  /**
   * @dev Returns the number of values in the set. O(1).
   */
  function length(AddressSet storage set) internal view returns (uint256) {
    return _length(set._inner);
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function at(AddressSet storage set, uint256 index) internal view returns (address) {
    return address(uint160(uint256(_at(set._inner, index))));
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function values(AddressSet storage set) internal view returns (address[] memory) {
    bytes32[] memory store = _values(set._inner);
    address[] memory result;

    /// @solidity memory-safe-assembly
    assembly {
      result := store
    }

    return result;
  }

  // UintSet

  struct UintSet {
    Set _inner;
  }

  /**
   * @dev Add a value to a set. O(1).
   *
   * Returns true if the value was added to the set, that is if it was not
   * already present.
   */
  function add(UintSet storage set, uint256 value) internal returns (bool) {
    return _add(set._inner, bytes32(value));
  }

  /**
   * @dev Removes a value from a set. O(1).
   *
   * Returns true if the value was removed from the set, that is if it was
   * present.
   */
  function remove(UintSet storage set, uint256 value) internal returns (bool) {
    return _remove(set._inner, bytes32(value));
  }

  /**
   * @dev Returns true if the value is in the set. O(1).
   */
  function contains(UintSet storage set, uint256 value) internal view returns (bool) {
    return _contains(set._inner, bytes32(value));
  }

  /**
   * @dev Returns the number of values in the set. O(1).
   */
  function length(UintSet storage set) internal view returns (uint256) {
    return _length(set._inner);
  }

  /**
   * @dev Returns the value stored at position `index` in the set. O(1).
   *
   * Note that there are no guarantees on the ordering of values inside the
   * array, and it may change when more values are added or removed.
   *
   * Requirements:
   *
   * - `index` must be strictly less than {length}.
   */
  function at(UintSet storage set, uint256 index) internal view returns (uint256) {
    return uint256(_at(set._inner, index));
  }

  /**
   * @dev Return the entire set in an array
   *
   * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
   * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
   * this function has an unbounded cost, and using it as part of a state-changing function may render the function
   * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
   */
  function values(UintSet storage set) internal view returns (uint256[] memory) {
    bytes32[] memory store = _values(set._inner);
    uint256[] memory result;

    /// @solidity memory-safe-assembly
    assembly {
      result := store
    }

    return result;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/// @notice This interface contains the only ARM-related functions that might be used on-chain by other CCIP contracts.
interface IARM {
  /// @notice A Merkle root tagged with the address of the commit store contract it is destined for.
  struct TaggedRoot {
    address commitStore;
    bytes32 root;
  }

  /// @notice Callers MUST NOT cache the return value as a blessed tagged root could become unblessed.
  function isBlessed(TaggedRoot calldata taggedRoot) external view returns (bool);

  /// @notice When the ARM is "cursed", CCIP pauses until the curse is lifted.
  function isCursed() external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);

  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `from` to `to` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/// @notice Interface for a liquidity container, this can be a CCIP token pool.
interface ILiquidityContainer {
  event LiquidityAdded(address indexed provider, uint256 indexed amount);
  event LiquidityRemoved(address indexed provider, uint256 indexed amount);

  /// @notice Provide additional liquidity to the container.
  /// @dev Should emit LiquidityAdded
  function provideLiquidity(uint256 amount) external;

  /// @notice Withdraws liquidity from the container to the msg sender
  /// @dev Should emit LiquidityRemoved
  function withdrawLiquidity(uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IOwnable {
  function owner() external returns (address);

  function transferOwnership(address recipient) external;

  function acceptOwnership() external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20} from "../../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";

// Shared public interface for multiple pool types.
// Each pool type handles a different child token model (lock/unlock, mint/burn.)
interface IPool {
  /// @notice Lock tokens into the pool or burn the tokens.
  /// @param originalSender Original sender of the tokens.
  /// @param receiver Receiver of the tokens on destination chain.
  /// @param amount Amount to lock or burn.
  /// @param remoteChainSelector Destination chain Id.
  /// @param extraArgs Additional data passed in by sender for lockOrBurn processing
  /// in custom pools on source chain.
  /// @return retData Optional field that contains bytes. Unused for now but already
  /// implemented to allow future upgrades while preserving the interface.
  function lockOrBurn(
    address originalSender,
    bytes calldata receiver,
    uint256 amount,
    uint64 remoteChainSelector,
    bytes calldata extraArgs
  ) external returns (bytes memory);

  /// @notice Releases or mints tokens to the receiver address.
  /// @param originalSender Original sender of the tokens.
  /// @param receiver Receiver of the tokens.
  /// @param amount Amount to release or mint.
  /// @param remoteChainSelector Source chain Id.
  /// @param extraData Additional data supplied offchain for releaseOrMint processing in
  /// custom pools on dest chain. This could be an attestation that was retrieved through a
  /// third party API.
  /// @dev offchainData can come from any untrusted source.
  function releaseOrMint(
    bytes memory originalSender,
    address receiver,
    uint256 amount,
    uint64 remoteChainSelector,
    bytes memory extraData
  ) external;

  /// @notice Gets the IERC20 token that this pool can lock or burn.
  /// @return token The IERC20 token representation.
  function getToken() external view returns (IERC20 token);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Client} from "../libraries/Client.sol";

interface IRouter {
  error OnlyOffRamp();

  /// @notice Route the message to its intended receiver contract.
  /// @param message Client.Any2EVMMessage struct.
  /// @param gasForCallExactCheck of params for exec
  /// @param gasLimit set of params for exec
  /// @param receiver set of params for exec
  /// @dev if the receiver is a contracts that signals support for CCIP execution through EIP-165.
  /// the contract is called. If not, only tokens are transferred.
  /// @return success A boolean value indicating whether the ccip message was received without errors.
  /// @return retBytes A bytes array containing return data form CCIP receiver.
  /// @return gasUsed the gas used by the external customer call. Does not include any overhead.
  function routeMessage(
    Client.Any2EVMMessage calldata message,
    uint16 gasForCallExactCheck,
    uint256 gasLimit,
    address receiver
  ) external returns (bool success, bytes memory retBytes, uint256 gasUsed);

  /// @notice Returns the configured onramp for a specific destination chain.
  /// @param destChainSelector The destination chain Id to get the onRamp for.
  /// @return onRampAddress The address of the onRamp.
  function getOnRamp(uint64 destChainSelector) external view returns (address onRampAddress);

  /// @notice Return true if the given offRamp is a configured offRamp for the given source chain.
  /// @param sourceChainSelector The source chain selector to check.
  /// @param offRamp The address of the offRamp to check.
  function isOffRamp(uint64 sourceChainSelector, address offRamp) external view returns (bool isOffRamp);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface ITypeAndVersion {
  function typeAndVersion() external pure returns (string memory);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.19;

import {ITypeAndVersion} from "../../shared/interfaces/ITypeAndVersion.sol";
import {ILiquidityContainer} from "../../rebalancer/interfaces/ILiquidityContainer.sol";

import {TokenPool} from "./TokenPool.sol";
import {RateLimiter} from "../libraries/RateLimiter.sol";

import {IERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/utils/SafeERC20.sol";

/// @notice Token pool used for tokens on their native chain. This uses a lock and release mechanism.
/// Because of lock/unlock requiring liquidity, this pool contract also has function to add and remove
/// liquidity. This allows for proper bookkeeping for both user and liquidity provider balances.
/// @dev One token per LockReleaseTokenPool.
contract LockReleaseTokenPool is TokenPool, ILiquidityContainer, ITypeAndVersion {
  using SafeERC20 for IERC20;

  error InsufficientLiquidity();
  error LiquidityNotAccepted();
  error Unauthorized(address caller);

  string public constant override typeAndVersion = "LockReleaseTokenPool 1.4.0";

  /// @dev The unique lock release pool flag to signal through EIP 165.
  bytes4 private constant LOCK_RELEASE_INTERFACE_ID = bytes4(keccak256("LockReleaseTokenPool"));

  /// @dev Whether or not the pool accepts liquidity.
  /// External liquidity is not required when there is one canonical token deployed to a chain,
  /// and CCIP is facilitating mint/burn on all the other chains, in which case the invariant
  /// balanceOf(pool) on home chain == sum(totalSupply(mint/burn "wrapped" token) on all remote chains) should always hold
  bool internal immutable i_acceptLiquidity;
  /// @notice The address of the rebalancer.
  address internal s_rebalancer;
  /// @notice The address of the rate limiter admin.
  /// @dev Can be address(0) if none is configured.
  address internal s_rateLimitAdmin;

  constructor(
    IERC20 token,
    address[] memory allowlist,
    address armProxy,
    bool acceptLiquidity,
    address router
  ) TokenPool(token, allowlist, armProxy, router) {
    i_acceptLiquidity = acceptLiquidity;
  }

  /// @notice Locks the token in the pool
  /// @param amount Amount to lock
  /// @dev The whenHealthy check is important to ensure that even if a ramp is compromised
  /// we're able to stop token movement via ARM.
  function lockOrBurn(
    address originalSender,
    bytes calldata,
    uint256 amount,
    uint64 remoteChainSelector,
    bytes calldata
  )
    external
    virtual
    override
    onlyOnRamp(remoteChainSelector)
    checkAllowList(originalSender)
    whenHealthy
    returns (bytes memory)
  {
    _consumeOutboundRateLimit(remoteChainSelector, amount);
    emit Locked(msg.sender, amount);
    return "";
  }

  /// @notice Release tokens from the pool to the recipient
  /// @param receiver Recipient address
  /// @param amount Amount to release
  /// @dev The whenHealthy check is important to ensure that even if a ramp is compromised
  /// we're able to stop token movement via ARM.
  function releaseOrMint(
    bytes memory,
    address receiver,
    uint256 amount,
    uint64 remoteChainSelector,
    bytes memory
  ) external virtual override onlyOffRamp(remoteChainSelector) whenHealthy {
    _consumeInboundRateLimit(remoteChainSelector, amount);
    getToken().safeTransfer(receiver, amount);
    emit Released(msg.sender, receiver, amount);
  }

  /// @notice returns the lock release interface flag used for EIP165 identification.
  function getLockReleaseInterfaceId() public pure returns (bytes4) {
    return LOCK_RELEASE_INTERFACE_ID;
  }

  // @inheritdoc IERC165
  function supportsInterface(bytes4 interfaceId) public pure virtual override returns (bool) {
    return
      interfaceId == LOCK_RELEASE_INTERFACE_ID ||
      interfaceId == type(ILiquidityContainer).interfaceId ||
      super.supportsInterface(interfaceId);
  }

  /// @notice Gets Rebalancer, can be address(0) if none is configured.
  /// @return The current liquidity manager.
  function getRebalancer() external view returns (address) {
    return s_rebalancer;
  }

  /// @notice Sets the Rebalancer address.
  /// @dev Only callable by the owner.
  function setRebalancer(address rebalancer) external onlyOwner {
    s_rebalancer = rebalancer;
  }

  /// @notice Sets the rate limiter admin address.
  /// @dev Only callable by the owner.
  /// @param rateLimitAdmin The new rate limiter admin address.
  function setRateLimitAdmin(address rateLimitAdmin) external onlyOwner {
    s_rateLimitAdmin = rateLimitAdmin;
  }

  /// @notice Gets the rate limiter admin address.
  function getRateLimitAdmin() external view returns (address) {
    return s_rateLimitAdmin;
  }

  /// @notice Checks if the pool can accept liquidity.
  /// @return true if the pool can accept liquidity, false otherwise.
  function canAcceptLiquidity() external view returns (bool) {
    return i_acceptLiquidity;
  }

  /// @notice Adds liquidity to the pool. The tokens should be approved first.
  /// @param amount The amount of liquidity to provide.
  function provideLiquidity(uint256 amount) external {
    if (!i_acceptLiquidity) revert LiquidityNotAccepted();
    if (s_rebalancer != msg.sender) revert Unauthorized(msg.sender);

    i_token.safeTransferFrom(msg.sender, address(this), amount);
    emit LiquidityAdded(msg.sender, amount);
  }

  /// @notice Removed liquidity to the pool. The tokens will be sent to msg.sender.
  /// @param amount The amount of liquidity to remove.
  function withdrawLiquidity(uint256 amount) external {
    if (s_rebalancer != msg.sender) revert Unauthorized(msg.sender);

    if (i_token.balanceOf(address(this)) < amount) revert InsufficientLiquidity();
    i_token.safeTransfer(msg.sender, amount);
    emit LiquidityRemoved(msg.sender, amount);
  }

  /// @notice Sets the rate limiter admin address.
  /// @dev Only callable by the owner or the rate limiter admin. NOTE: overwrites the normal
  /// onlyAdmin check in the base implementation to also allow the rate limiter admin.
  /// @param remoteChainSelector The remote chain selector for which the rate limits apply.
  /// @param outboundConfig The new outbound rate limiter config.
  /// @param inboundConfig The new inbound rate limiter config.
  function setChainRateLimiterConfig(
    uint64 remoteChainSelector,
    RateLimiter.Config memory outboundConfig,
    RateLimiter.Config memory inboundConfig
  ) external override {
    if (msg.sender != s_rateLimitAdmin && msg.sender != owner()) revert Unauthorized(msg.sender);

    _setRateLimitConfig(remoteChainSelector, outboundConfig, inboundConfig);
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {ConfirmedOwner} from "./ConfirmedOwner.sol";

/// @title The OwnerIsCreator contract
/// @notice A contract with helpers for basic contract ownership.
contract OwnerIsCreator is ConfirmedOwner {
  constructor() ConfirmedOwner(msg.sender) {}
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;

/// @notice Implements Token Bucket rate limiting.
/// @dev uint128 is safe for rate limiter state.
/// For USD value rate limiting, it can adequately store USD value in 18 decimals.
/// For ERC20 token amount rate limiting, all tokens that will be listed will have at most
/// a supply of uint128.max tokens, and it will therefore not overflow the bucket.
/// In exceptional scenarios where tokens consumed may be larger than uint128,
/// e.g. compromised issuer, an enabled RateLimiter will check and revert.
library RateLimiter {
  error BucketOverfilled();
  error OnlyCallableByAdminOrOwner();
  error TokenMaxCapacityExceeded(uint256 capacity, uint256 requested, address tokenAddress);
  error TokenRateLimitReached(uint256 minWaitInSeconds, uint256 available, address tokenAddress);
  error AggregateValueMaxCapacityExceeded(uint256 capacity, uint256 requested);
  error AggregateValueRateLimitReached(uint256 minWaitInSeconds, uint256 available);
  error InvalidRatelimitRate(Config rateLimiterConfig);
  error DisabledNonZeroRateLimit(Config config);
  error RateLimitMustBeDisabled();

  event TokensConsumed(uint256 tokens);
  event ConfigChanged(Config config);

  struct TokenBucket {
    uint128 tokens; // ──────╮ Current number of tokens that are in the bucket.
    uint32 lastUpdated; //   │ Timestamp in seconds of the last token refill, good for 100+ years.
    bool isEnabled; // ──────╯ Indication whether the rate limiting is enabled or not
    uint128 capacity; // ────╮ Maximum number of tokens that can be in the bucket.
    uint128 rate; // ────────╯ Number of tokens per second that the bucket is refilled.
  }

  struct Config {
    bool isEnabled; // Indication whether the rate limiting should be enabled
    uint128 capacity; // ────╮ Specifies the capacity of the rate limiter
    uint128 rate; //  ───────╯ Specifies the rate of the rate limiter
  }

  /// @notice _consume removes the given tokens from the pool, lowering the
  /// rate tokens allowed to be consumed for subsequent calls.
  /// @param requestTokens The total tokens to be consumed from the bucket.
  /// @param tokenAddress The token to consume capacity for, use 0x0 to indicate aggregate value capacity.
  /// @dev Reverts when requestTokens exceeds bucket capacity or available tokens in the bucket
  /// @dev emits removal of requestTokens if requestTokens is > 0
  function _consume(TokenBucket storage s_bucket, uint256 requestTokens, address tokenAddress) internal {
    // If there is no value to remove or rate limiting is turned off, skip this step to reduce gas usage
    if (!s_bucket.isEnabled || requestTokens == 0) {
      return;
    }

    uint256 tokens = s_bucket.tokens;
    uint256 capacity = s_bucket.capacity;
    uint256 timeDiff = block.timestamp - s_bucket.lastUpdated;

    if (timeDiff != 0) {
      if (tokens > capacity) revert BucketOverfilled();

      // Refill tokens when arriving at a new block time
      tokens = _calculateRefill(capacity, tokens, timeDiff, s_bucket.rate);

      s_bucket.lastUpdated = uint32(block.timestamp);
    }

    if (capacity < requestTokens) {
      // Token address 0 indicates consuming aggregate value rate limit capacity.
      if (tokenAddress == address(0)) revert AggregateValueMaxCapacityExceeded(capacity, requestTokens);
      revert TokenMaxCapacityExceeded(capacity, requestTokens, tokenAddress);
    }
    if (tokens < requestTokens) {
      uint256 rate = s_bucket.rate;
      // Wait required until the bucket is refilled enough to accept this value, round up to next higher second
      // Consume is not guaranteed to succeed after wait time passes if there is competing traffic.
      // This acts as a lower bound of wait time.
      uint256 minWaitInSeconds = ((requestTokens - tokens) + (rate - 1)) / rate;

      if (tokenAddress == address(0)) revert AggregateValueRateLimitReached(minWaitInSeconds, tokens);
      revert TokenRateLimitReached(minWaitInSeconds, tokens, tokenAddress);
    }
    tokens -= requestTokens;

    // Downcast is safe here, as tokens is not larger than capacity
    s_bucket.tokens = uint128(tokens);
    emit TokensConsumed(requestTokens);
  }

  /// @notice Gets the token bucket with its values for the block it was requested at.
  /// @return The token bucket.
  function _currentTokenBucketState(TokenBucket memory bucket) internal view returns (TokenBucket memory) {
    // We update the bucket to reflect the status at the exact time of the
    // call. This means we might need to refill a part of the bucket based
    // on the time that has passed since the last update.
    bucket.tokens = uint128(
      _calculateRefill(bucket.capacity, bucket.tokens, block.timestamp - bucket.lastUpdated, bucket.rate)
    );
    bucket.lastUpdated = uint32(block.timestamp);
    return bucket;
  }

  /// @notice Sets the rate limited config.
  /// @param s_bucket The token bucket
  /// @param config The new config
  function _setTokenBucketConfig(TokenBucket storage s_bucket, Config memory config) internal {
    // First update the bucket to make sure the proper rate is used for all the time
    // up until the config change.
    uint256 timeDiff = block.timestamp - s_bucket.lastUpdated;
    if (timeDiff != 0) {
      s_bucket.tokens = uint128(_calculateRefill(s_bucket.capacity, s_bucket.tokens, timeDiff, s_bucket.rate));

      s_bucket.lastUpdated = uint32(block.timestamp);
    }

    s_bucket.tokens = uint128(_min(config.capacity, s_bucket.tokens));
    s_bucket.isEnabled = config.isEnabled;
    s_bucket.capacity = config.capacity;
    s_bucket.rate = config.rate;

    emit ConfigChanged(config);
  }

  /// @notice Validates the token bucket config
  function _validateTokenBucketConfig(Config memory config, bool mustBeDisabled) internal pure {
    if (config.isEnabled) {
      if (config.rate >= config.capacity || config.rate == 0) {
        revert InvalidRatelimitRate(config);
      }
      if (mustBeDisabled) {
        revert RateLimitMustBeDisabled();
      }
    } else {
      if (config.rate != 0 || config.capacity != 0) {
        revert DisabledNonZeroRateLimit(config);
      }
    }
  }

  /// @notice Calculate refilled tokens
  /// @param capacity bucket capacity
  /// @param tokens current bucket tokens
  /// @param timeDiff block time difference since last refill
  /// @param rate bucket refill rate
  /// @return the value of tokens after refill
  function _calculateRefill(
    uint256 capacity,
    uint256 tokens,
    uint256 timeDiff,
    uint256 rate
  ) private pure returns (uint256) {
    return _min(capacity, tokens + timeDiff * rate);
  }

  /// @notice Return the smallest of two integers
  /// @param a first int
  /// @param b second int
  /// @return smallest
  function _min(uint256 a, uint256 b) internal pure returns (uint256) {
    return a < b ? a : b;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
  using Address for address;

  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
  }

  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
  }

  /**
   * @dev Deprecated. This function has issues similar to the ones found in
   * {IERC20-approve}, and its usage is discouraged.
   *
   * Whenever possible, use {safeIncreaseAllowance} and
   * {safeDecreaseAllowance} instead.
   */
  function safeApprove(IERC20 token, address spender, uint256 value) internal {
    // safeApprove should only be called when setting an initial allowance,
    // or when resetting it to zero. To increase and decrease it, use
    // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
    require(
      (value == 0) || (token.allowance(address(this), spender) == 0),
      "SafeERC20: approve from non-zero to non-zero allowance"
    );
    _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
  }

  function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
    uint256 newAllowance = token.allowance(address(this), spender) + value;
    _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
  }

  function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
    unchecked {
      uint256 oldAllowance = token.allowance(address(this), spender);
      require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
      uint256 newAllowance = oldAllowance - value;
      _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
  }

  function safePermit(
    IERC20Permit token,
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) internal {
    uint256 nonceBefore = token.nonces(owner);
    token.permit(owner, spender, value, deadline, v, r, s);
    uint256 nonceAfter = token.nonces(owner);
    require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
  }

  /**
   * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
   * on the return value: the return value is optional (but if data is returned, it must not be false).
   * @param token The token targeted by the call.
   * @param data The call data (encoded using abi.encode or one of its variants).
   */
  function _callOptionalReturn(IERC20 token, bytes memory data) private {
    // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
    // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
    // the target address contains contract code and also asserts for success in the low-level call.

    bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
    if (returndata.length > 0) {
      // Return data is optional
      require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.19;

import {IPool} from "../interfaces/pools/IPool.sol";
import {IARM} from "../interfaces/IARM.sol";
import {IRouter} from "../interfaces/IRouter.sol";

import {OwnerIsCreator} from "../../shared/access/OwnerIsCreator.sol";
import {RateLimiter} from "../libraries/RateLimiter.sol";

import {IERC20} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/token/ERC20/IERC20.sol";
import {IERC165} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/utils/introspection/IERC165.sol";
import {EnumerableSet} from "../../vendor/openzeppelin-solidity/v4.8.3/contracts/utils/structs/EnumerableSet.sol";

/// @notice Base abstract class with common functions for all token pools.
/// A token pool serves as isolated place for holding tokens and token specific logic
/// that may execute as tokens move across the bridge.
abstract contract TokenPool is IPool, OwnerIsCreator, IERC165 {
  using EnumerableSet for EnumerableSet.AddressSet;
  using EnumerableSet for EnumerableSet.UintSet;
  using RateLimiter for RateLimiter.TokenBucket;

  error CallerIsNotARampOnRouter(address caller);
  error ZeroAddressNotAllowed();
  error SenderNotAllowed(address sender);
  error AllowListNotEnabled();
  error NonExistentChain(uint64 remoteChainSelector);
  error ChainNotAllowed(uint64 remoteChainSelector);
  error BadARMSignal();
  error ChainAlreadyExists(uint64 chainSelector);

  event Locked(address indexed sender, uint256 amount);
  event Burned(address indexed sender, uint256 amount);
  event Released(address indexed sender, address indexed recipient, uint256 amount);
  event Minted(address indexed sender, address indexed recipient, uint256 amount);
  event ChainAdded(
    uint64 remoteChainSelector,
    RateLimiter.Config outboundRateLimiterConfig,
    RateLimiter.Config inboundRateLimiterConfig
  );
  event ChainConfigured(
    uint64 remoteChainSelector,
    RateLimiter.Config outboundRateLimiterConfig,
    RateLimiter.Config inboundRateLimiterConfig
  );
  event ChainRemoved(uint64 remoteChainSelector);
  event AllowListAdd(address sender);
  event AllowListRemove(address sender);
  event RouterUpdated(address oldRouter, address newRouter);

  struct ChainUpdate {
    uint64 remoteChainSelector; // ──╮ Remote chain selector
    bool allowed; // ────────────────╯ Whether the chain is allowed
    RateLimiter.Config outboundRateLimiterConfig; // Outbound rate limited config, meaning the rate limits for all of the onRamps for the given chain
    RateLimiter.Config inboundRateLimiterConfig; // Inbound rate limited config, meaning the rate limits for all of the offRamps for the given chain
  }

  /// @dev The bridgeable token that is managed by this pool.
  IERC20 internal immutable i_token;
  /// @dev The address of the arm proxy
  address internal immutable i_armProxy;
  /// @dev The immutable flag that indicates if the pool is access-controlled.
  bool internal immutable i_allowlistEnabled;
  /// @dev A set of addresses allowed to trigger lockOrBurn as original senders.
  /// Only takes effect if i_allowlistEnabled is true.
  /// This can be used to ensure only token-issuer specified addresses can
  /// move tokens.
  EnumerableSet.AddressSet internal s_allowList;
  /// @dev The address of the router
  IRouter internal s_router;
  /// @dev A set of allowed chain selectors. We want the allowlist to be enumerable to
  /// be able to quickly determine (without parsing logs) who can access the pool.
  /// @dev The chain selectors are in uin256 format because of the EnumerableSet implementation.
  EnumerableSet.UintSet internal s_remoteChainSelectors;
  /// @dev Outbound rate limits. Corresponds to the inbound rate limit for the pool
  /// on the remote chain.
  mapping(uint64 remoteChainSelector => RateLimiter.TokenBucket) internal s_outboundRateLimits;
  /// @dev Inbound rate limits. This allows per destination chain
  /// token issuer specified rate limiting (e.g. issuers may trust chains to varying
  /// degrees and prefer different limits)
  mapping(uint64 remoteChainSelector => RateLimiter.TokenBucket) internal s_inboundRateLimits;

  constructor(IERC20 token, address[] memory allowlist, address armProxy, address router) {
    if (address(token) == address(0) || router == address(0)) revert ZeroAddressNotAllowed();
    i_token = token;
    i_armProxy = armProxy;
    s_router = IRouter(router);

    // Pool can be set as permissioned or permissionless at deployment time only to save hot-path gas.
    i_allowlistEnabled = allowlist.length > 0;
    if (i_allowlistEnabled) {
      _applyAllowListUpdates(new address[](0), allowlist);
    }
  }

  /// @notice Get ARM proxy address
  /// @return armProxy Address of arm proxy
  function getArmProxy() public view returns (address armProxy) {
    return i_armProxy;
  }

  /// @inheritdoc IPool
  function getToken() public view override returns (IERC20 token) {
    return i_token;
  }

  /// @notice Gets the pool's Router
  /// @return router The pool's Router
  function getRouter() public view returns (address router) {
    return address(s_router);
  }

  /// @notice Sets the pool's Router
  /// @param newRouter The new Router
  function setRouter(address newRouter) public onlyOwner {
    if (newRouter == address(0)) revert ZeroAddressNotAllowed();
    address oldRouter = address(s_router);
    s_router = IRouter(newRouter);

    emit RouterUpdated(oldRouter, newRouter);
  }

  /// @inheritdoc IERC165
  function supportsInterface(bytes4 interfaceId) public pure virtual override returns (bool) {
    return interfaceId == type(IPool).interfaceId || interfaceId == type(IERC165).interfaceId;
  }

  // ================================================================
  // │                     Chain permissions                        │
  // ================================================================

  /// @notice Checks whether a chain selector is permissioned on this contract.
  /// @return true if the given chain selector is a permissioned remote chain.
  function isSupportedChain(uint64 remoteChainSelector) public view returns (bool) {
    return s_remoteChainSelectors.contains(remoteChainSelector);
  }

  /// @notice Get list of allowed chains
  /// @return list of chains.
  function getSupportedChains() public view returns (uint64[] memory) {
    uint256[] memory uint256ChainSelectors = s_remoteChainSelectors.values();
    uint64[] memory chainSelectors = new uint64[](uint256ChainSelectors.length);
    for (uint256 i = 0; i < uint256ChainSelectors.length; ++i) {
      chainSelectors[i] = uint64(uint256ChainSelectors[i]);
    }

    return chainSelectors;
  }

  /// @notice Sets the permissions for a list of chains selectors. Actual senders for these chains
  /// need to be allowed on the Router to interact with this pool.
  /// @dev Only callable by the owner
  /// @param chains A list of chains and their new permission status & rate limits. Rate limits
  /// are only used when the chain is being added through `allowed` being true.
  function applyChainUpdates(ChainUpdate[] calldata chains) external virtual onlyOwner {
    for (uint256 i = 0; i < chains.length; ++i) {
      ChainUpdate memory update = chains[i];
      RateLimiter._validateTokenBucketConfig(update.outboundRateLimiterConfig, !update.allowed);
      RateLimiter._validateTokenBucketConfig(update.inboundRateLimiterConfig, !update.allowed);

      if (update.allowed) {
        // If the chain already exists, revert
        if (!s_remoteChainSelectors.add(update.remoteChainSelector)) {
          revert ChainAlreadyExists(update.remoteChainSelector);
        }

        s_outboundRateLimits[update.remoteChainSelector] = RateLimiter.TokenBucket({
          rate: update.outboundRateLimiterConfig.rate,
          capacity: update.outboundRateLimiterConfig.capacity,
          tokens: update.outboundRateLimiterConfig.capacity,
          lastUpdated: uint32(block.timestamp),
          isEnabled: update.outboundRateLimiterConfig.isEnabled
        });

        s_inboundRateLimits[update.remoteChainSelector] = RateLimiter.TokenBucket({
          rate: update.inboundRateLimiterConfig.rate,
          capacity: update.inboundRateLimiterConfig.capacity,
          tokens: update.inboundRateLimiterConfig.capacity,
          lastUpdated: uint32(block.timestamp),
          isEnabled: update.inboundRateLimiterConfig.isEnabled
        });
        emit ChainAdded(update.remoteChainSelector, update.outboundRateLimiterConfig, update.inboundRateLimiterConfig);
      } else {
        // If the chain doesn't exist, revert
        if (!s_remoteChainSelectors.remove(update.remoteChainSelector)) {
          revert NonExistentChain(update.remoteChainSelector);
        }

        delete s_inboundRateLimits[update.remoteChainSelector];
        delete s_outboundRateLimits[update.remoteChainSelector];
        emit ChainRemoved(update.remoteChainSelector);
      }
    }
  }

  // ================================================================
  // │                        Rate limiting                         │
  // ================================================================

  /// @notice Consumes outbound rate limiting capacity in this pool
  function _consumeOutboundRateLimit(uint64 remoteChainSelector, uint256 amount) internal {
    s_outboundRateLimits[remoteChainSelector]._consume(amount, address(i_token));
  }

  /// @notice Consumes inbound rate limiting capacity in this pool
  function _consumeInboundRateLimit(uint64 remoteChainSelector, uint256 amount) internal {
    s_inboundRateLimits[remoteChainSelector]._consume(amount, address(i_token));
  }

  /// @notice Gets the token bucket with its values for the block it was requested at.
  /// @return The token bucket.
  function getCurrentOutboundRateLimiterState(
    uint64 remoteChainSelector
  ) external view returns (RateLimiter.TokenBucket memory) {
    return s_outboundRateLimits[remoteChainSelector]._currentTokenBucketState();
  }

  /// @notice Gets the token bucket with its values for the block it was requested at.
  /// @return The token bucket.
  function getCurrentInboundRateLimiterState(
    uint64 remoteChainSelector
  ) external view returns (RateLimiter.TokenBucket memory) {
    return s_inboundRateLimits[remoteChainSelector]._currentTokenBucketState();
  }

  /// @notice Sets the chain rate limiter config.
  /// @param remoteChainSelector The remote chain selector for which the rate limits apply.
  /// @param outboundConfig The new outbound rate limiter config, meaning the onRamp rate limits for the given chain.
  /// @param inboundConfig The new inbound rate limiter config, meaning the offRamp rate limits for the given chain.
  function setChainRateLimiterConfig(
    uint64 remoteChainSelector,
    RateLimiter.Config memory outboundConfig,
    RateLimiter.Config memory inboundConfig
  ) external virtual onlyOwner {
    _setRateLimitConfig(remoteChainSelector, outboundConfig, inboundConfig);
  }

  function _setRateLimitConfig(
    uint64 remoteChainSelector,
    RateLimiter.Config memory outboundConfig,
    RateLimiter.Config memory inboundConfig
  ) internal {
    if (!isSupportedChain(remoteChainSelector)) revert NonExistentChain(remoteChainSelector);
    RateLimiter._validateTokenBucketConfig(outboundConfig, false);
    s_outboundRateLimits[remoteChainSelector]._setTokenBucketConfig(outboundConfig);
    RateLimiter._validateTokenBucketConfig(inboundConfig, false);
    s_inboundRateLimits[remoteChainSelector]._setTokenBucketConfig(inboundConfig);
    emit ChainConfigured(remoteChainSelector, outboundConfig, inboundConfig);
  }

  // ================================================================
  // │                           Access                             │
  // ================================================================

  /// @notice Checks whether remote chain selector is configured on this contract, and if the msg.sender
  /// is a permissioned onRamp for the given chain on the Router.
  modifier onlyOnRamp(uint64 remoteChainSelector) {
    if (!isSupportedChain(remoteChainSelector)) revert ChainNotAllowed(remoteChainSelector);
    if (!(msg.sender == s_router.getOnRamp(remoteChainSelector))) revert CallerIsNotARampOnRouter(msg.sender);
    _;
  }

  /// @notice Checks whether remote chain selector is configured on this contract, and if the msg.sender
  /// is a permissioned offRamp for the given chain on the Router.
  modifier onlyOffRamp(uint64 remoteChainSelector) {
    if (!isSupportedChain(remoteChainSelector)) revert ChainNotAllowed(remoteChainSelector);
    if (!s_router.isOffRamp(remoteChainSelector, msg.sender)) revert CallerIsNotARampOnRouter(msg.sender);
    _;
  }

  // ================================================================
  // │                          Allowlist                           │
  // ================================================================

  modifier checkAllowList(address sender) {
    if (i_allowlistEnabled && !s_allowList.contains(sender)) revert SenderNotAllowed(sender);
    _;
  }

  /// @notice Gets whether the allowList functionality is enabled.
  /// @return true is enabled, false if not.
  function getAllowListEnabled() external view returns (bool) {
    return i_allowlistEnabled;
  }

  /// @notice Gets the allowed addresses.
  /// @return The allowed addresses.
  function getAllowList() external view returns (address[] memory) {
    return s_allowList.values();
  }

  /// @notice Apply updates to the allow list.
  /// @param removes The addresses to be removed.
  /// @param adds The addresses to be added.
  /// @dev allowListing will be removed before public launch
  function applyAllowListUpdates(address[] calldata removes, address[] calldata adds) external onlyOwner {
    _applyAllowListUpdates(removes, adds);
  }

  /// @notice Internal version of applyAllowListUpdates to allow for reuse in the constructor.
  function _applyAllowListUpdates(address[] memory removes, address[] memory adds) internal {
    if (!i_allowlistEnabled) revert AllowListNotEnabled();

    for (uint256 i = 0; i < removes.length; ++i) {
      address toRemove = removes[i];
      if (s_allowList.remove(toRemove)) {
        emit AllowListRemove(toRemove);
      }
    }
    for (uint256 i = 0; i < adds.length; ++i) {
      address toAdd = adds[i];
      if (toAdd == address(0)) {
        continue;
      }
      if (s_allowList.add(toAdd)) {
        emit AllowListAdd(toAdd);
      }
    }
  }

  /// @notice Ensure that there is no active curse.
  modifier whenHealthy() {
    if (IARM(i_armProxy).isCursed()) revert BadARMSignal();
    _;
  }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
  /**
   * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
   * given ``owner``'s signed approval.
   *
   * IMPORTANT: The same issues {IERC20-approve} has related to transaction
   * ordering also apply here.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `deadline` must be a timestamp in the future.
   * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
   * over the EIP712-formatted function arguments.
   * - the signature must use ``owner``'s current nonce (see {nonces}).
   *
   * For more information on the signature format, see the
   * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
   * section].
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  /**
   * @dev Returns the current nonce for `owner`. This value must be
   * included whenever a signature is generated for {permit}.
   *
   * Every successful call to {permit} increases ``owner``'s nonce by one. This
   * prevents a signature from being used multiple times.
   */
  function nonces(address owner) external view returns (uint256);

  /**
   * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
   */
  // solhint-disable-next-line func-name-mixedcase
  function DOMAIN_SEPARATOR() external view returns (bytes32);
}

{
  "compilationTarget": {
    "src/v0.8/ccip/pools/LockReleaseTokenPool.sol": "LockReleaseTokenPool"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "none"
  },
  "optimizer": {
    "enabled": true,
    "runs": 1000000
  },
  "remappings": [
    ":@arbitrum/=node_modules/@arbitrum/",
    ":@ensdomains/=node_modules/@ensdomains/",
    ":@eth-optimism/=node_modules/@eth-optimism/",
    ":@offchainlabs/=node_modules/@offchainlabs/",
    ":@openzeppelin/=node_modules/@openzeppelin/",
    ":@scroll-tech/=node_modules/@scroll-tech/",
    ":ds-test/=foundry-lib/forge-std/lib/ds-test/src/",
    ":eth-gas-reporter/=node_modules/eth-gas-reporter/",
    ":forge-std/=foundry-lib/forge-std/src/",
    ":hardhat/=node_modules/hardhat/"
  ]
}