pragma solidity >=0.6.0 <0.8.0;

contract EternalStorage {

    mapping(bytes32 => uint256) internal uintStorage;
    mapping(bytes32 => string) internal stringStorage;
    mapping(bytes32 => address) internal addressStorage;
    mapping(bytes32 => bytes) internal bytesStorage;
    mapping(bytes32 => bool) internal boolStorage;
    mapping(bytes32 => int256) internal intStorage;

}
// File: @openzeppelin/contracts/utils/ReentrancyGuard.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// File: @openzeppelin/contracts/math/SafeMath.sol


/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}



// File: @openzeppelin/contracts/utils/Context.sol


/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @uniswap/lib/contracts/libraries/TransferHelper.sol


// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('approve(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::safeApprove: approve failed'
        );
    }

    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transfer(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::safeTransfer: transfer failed'
        );
    }

    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::transferFrom: transferFrom failed'
        );
    }

    function safeTransferBaseToken(address token, address payable to, uint value, bool isERC20) internal {
        if (!isERC20) {
            to.transfer(value);
        } else {
            (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
            require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FAILED');
        }
    }
}



interface IERCBurn {
    function burn(uint256 _amount) external;
    function approve(address spender, uint256 amount) external returns (bool);
    function allowance(address owner, address spender) external returns (uint256);
    function balanceOf(address account) external view returns (uint256);
}

interface IUniFactory {
    function getPair(address tokenA, address tokenB) external view returns (address);
}

interface IMigrator {
    function migrate(address lpToken, uint256 amount, uint256 unlockDate, address owner) external returns (bool);
}

contract TokenLocker is Ownable, ReentrancyGuard,EternalStorage {
  using SafeMath for uint256;

  

  struct TokenLock {
    uint256 lockDate; // the date the token was locked
    uint256 amount; // the amount of tokens still locked (initialAmount minus withdrawls)
    uint256 initialAmount; // the initial lock amount
    uint256 unlockDate; // the date the token can be withdrawn
    address owner;
  }

  mapping(address => address[]) public lockedTokens;
  mapping(address => address[]) public lockedUser;
  mapping(address =>  mapping (address => TokenLock)) public tokenLocks; //map univ2 pair to all its locks
  
  struct FeeStruct {
    uint256 ethFee; // Small eth fee to prevent spam on the platform
    uint256 liquidityFee; // fee on univ2 liquidity tokens
  }
    
  FeeStruct public gFees;
  
  address payable devaddr;
  address payable lpaddr;

  
  IMigrator migrator;

  event onDeposit(address lpToken, address user, uint256 amount, uint256 lockDate, uint256 unlockDate);
  event onWithdraw(address lpToken, uint256 amount);

  constructor(address payable _lpaddr) public {
    devaddr = msg.sender;
    lpaddr = _lpaddr;
    gFees.ethFee = 0.1 ether;
    gFees.liquidityFee = 10; // 1%
  }
  
  function setDev(address payable _devaddr) public onlyOwner {
    devaddr = _devaddr;
  }
  
  /**
   * @notice set the migrator contract which allows locked lp tokens to be migrated to uniswap v3
   */
  function setMigrator(IMigrator _migrator) public onlyOwner {
    migrator = _migrator;
  }
  


  
  function setFees(uint256 _ethFee, uint256 _liquidityFee) public onlyOwner {
    gFees.ethFee = _ethFee;
    gFees.liquidityFee = _liquidityFee;
  }
  


  /**
   * @notice Creates a new lock
   * @param _lpToken the univ2 token address
   * @param _amount amount of LP tokens to lock
   * @param _unlock_date the unix timestamp (in seconds) until unlock
   * @param _withdrawer the user who can withdraw liquidity once the lock expires.
   */
  function lockLPToken (address _lpToken, uint256 _amount, uint256 _unlock_date, address payable _withdrawer) external payable nonReentrant {
    require(_unlock_date < 10000000000, 'TIMESTAMP INVALID'); // prevents errors when timestamp entered in milliseconds
    require(_amount > 0, 'INSUFFICIENT');


    TransferHelper.safeTransferFrom(_lpToken, address(msg.sender), address(this), _amount);
    
    
    uint256 ethFee = gFees.ethFee;
    require(msg.value == ethFee, 'FEE NOT MET');
    uint256 devFee = ethFee;
    devaddr.transfer(devFee);
    
    // percent fee
    uint256 liquidityFee = _amount.mul(gFees.liquidityFee).div(1000);
    TransferHelper.safeTransfer(_lpToken, lpaddr, liquidityFee);
    uint256 amountLocked = _amount.sub(liquidityFee);
    
	if(!boolStorage[keccak256(abi.encodePacked(_lpToken,_withdrawer))]){
        TokenLock memory token_lock;
        token_lock.lockDate = block.timestamp;
        token_lock.amount = amountLocked;
        token_lock.initialAmount = amountLocked;
        token_lock.unlockDate = _unlock_date;
        token_lock.owner = _withdrawer;
        // record the lock for the univ2pair
        tokenLocks[_lpToken][_withdrawer] = token_lock;
        boolStorage[keccak256(abi.encodePacked(_lpToken,_withdrawer))] = true;
        
        if(!boolStorage[keccak256(abi.encodePacked(_withdrawer,_lpToken))]){
          lockedTokens[_lpToken].push(_withdrawer);
          lockedUser[_withdrawer].push(_lpToken);
          boolStorage[keccak256(abi.encodePacked(_withdrawer,_lpToken))] = true;
        }
        emit onDeposit(_lpToken, msg.sender, token_lock.amount, token_lock.lockDate, token_lock.unlockDate);
	}else{
	    require(msg.sender == _withdrawer, '_withdrawer no sender');
	    TokenLock storage tokenLock = tokenLocks[_lpToken][_withdrawer];
		tokenLock.amount= tokenLock.amount.add(amountLocked);
		tokenLock.initialAmount= tokenLock.initialAmount.add(amountLocked);
		tokenLock.lockDate = block.timestamp;
		if(_unlock_date > tokenLock.unlockDate){
		    tokenLock.unlockDate = _unlock_date;
		}
		emit onDeposit(_lpToken, msg.sender, tokenLock.amount, tokenLock.lockDate, tokenLock.unlockDate);
	}

    
  }
  

  function relock (address _lpToken,  uint256 _unlock_date) external nonReentrant {
    require(_unlock_date < 10000000000, 'TIMESTAMP INVALID'); // prevents errors when timestamp entered in milliseconds
    TokenLock storage userLock = tokenLocks[_lpToken][msg.sender];
    require(userLock.owner == msg.sender, 'LOCK MISMATCH'); // ensures correct lock is affected
    require(userLock.unlockDate < _unlock_date, 'UNLOCK BEFORE');

    userLock.unlockDate = _unlock_date;

  }


  /**
   * @notice withdraw a specified amount from a lock. _index and _lockID ensure the correct lock is changed
   * this prevents errors when a user performs multiple tx per block possibly with varying gas prices
   */
  function withdraw (address _lpToken, uint256 _amount) external nonReentrant {
    require(_amount > 0, 'ZERO WITHDRAWL');
    TokenLock storage userLock = tokenLocks[_lpToken][msg.sender];
    require(userLock.owner == msg.sender, 'LOCK MISMATCH'); // ensures correct lock is affected
    require(userLock.unlockDate < block.timestamp, 'NOT YET');
    userLock.amount = userLock.amount.sub(_amount);

    // clean user storage
    if (userLock.amount == 0) {
		boolStorage[keccak256(abi.encodePacked(_lpToken,msg.sender))] = false;
    }
    
    TransferHelper.safeTransfer(_lpToken, msg.sender, _amount);
    emit onWithdraw(_lpToken, _amount);
  }
  


  function getLockForToken (address _lpToken) external view 
  returns (address[] memory) {
    address[] memory addr_list = lockedTokens[_lpToken];
    return addr_list;
  }
  
  function getLockForUser (address _user) external view 
  returns (address[] memory) {
    address[] memory addr_list = lockedUser[_user];
    return addr_list;
  }
  
  function getUserLockForToken (address _user, address _lpToken) external view 
  returns (uint256, uint256, uint256, uint256, address) {
    TokenLock storage tokenLock = tokenLocks[_lpToken][_user];
    return (tokenLock.lockDate, tokenLock.amount, tokenLock.initialAmount, tokenLock.unlockDate, tokenLock.owner);
  }
  

}

{
  "compilationTarget": {
    "browser/Untitled.sol": "TokenLocker"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}