// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

//SPDX-License-Identifier: MIT

pragma solidity 0.8.20;

import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

interface Aggregator {
   function latestRoundData() external view returns (uint80 roundId, int256 answer, uint256 startedAt, uint256 updatedAt, uint80 answeredInRound);
}

contract Presale is Ownable{
    using SafeERC20 for IERC20;
	
	uint256 public tokenToClaim;
	uint256 public tokenSold;
    uint256 public USDRaised;
	uint256 public currentStage;
	uint256 public startTime;
	uint256 public USDThreshold;
	
	address public burnWallet;
	address public AIM;
	address public USDT;
	Aggregator public aggregatorInterface;
	
	bool public claimStatus;
	bool public presaleStatus;
	
	uint256[5]  public tokenToSell;
	uint256[5]  public remainingToSell;
	uint256[][] public tokenPrice;
	
	struct buyTokenInfo {
	  uint256 USDPaid;
	  uint256 tokenFromBuy;
      uint256 clamedToken; 	  
    }
	
	mapping(address => buyTokenInfo) public mapBuyTokenInfo;
	
    event TokensBought(address user, uint256 tokens, uint256 amount);
	event TokensClaimed(address user, uint256 amount, uint256 timestamp);
	event PresaleStatusUpdated(bool status);
	
    constructor() {
	   tokenToSell = [30000000  * 10**18, 30000000 * 10**18, 30000000 * 10**18, 30000000 * 10**18, 30000000 * 10**18];
	   remainingToSell = [30000000  * 10**18, 30000000 * 10**18, 30000000 * 10**18, 30000000 * 10**18, 30000000 * 10**18];
	   
	   tokenPrice.push([10000, 13700, 17400, 21100]);
	   tokenPrice.push([24800, 28500, 32200, 35900]);
	   tokenPrice.push([39600, 43300, 47000, 50700]);
	   tokenPrice.push([54400, 58100, 61800, 65500]);
	   tokenPrice.push([69200, 72900, 76600, 80300]);
	   
	   USDThreshold = 25000 * 10**6;
		
	   aggregatorInterface = Aggregator(0x5f4eC3Df9cbd43714FE2740f5E3616155c5b8419);
	   burnWallet = address(0x000000000000000000000000000000000000dEaD);
	   AIM = address(0xf69c3A5Be775c92898735Ff4E1Fe99fE6Ec89813);
	   USDT = address(0xdAC17F958D2ee523a2206206994597C13D831ec7);
	}
	
	function buyWithUSDT(uint256 amount) external {
	   require(amount > 0, "Amount must be greater than zero");
	   require(presaleStatus, "Presale not start yet");
	   require(IERC20(USDT).balanceOf(address(msg.sender)) >= amount, "USDT amount not available to buy tokens");
	   require(IERC20(USDT).allowance(address(msg.sender), address(this)) >= amount, "Make sure to add enough USDT allowance");
	   require(USDThreshold >= (amount + mapBuyTokenInfo[address(msg.sender)].USDPaid), "Buy limit exceeded");
	   
	   uint256 currentRound = (block.timestamp - startTime) / 604800;
	   if(currentRound > 3)
	   {
	       _updateStage();
	   }
	   if(currentStage > 4)
	   {
	       presaleStatus = false;
		   claimStatus = true;
	   }
	   else
	   {
	       uint256 round = (block.timestamp - startTime) / 604800;
		           round = round > 3 ? 3 : round;
		   uint256 price = tokenPrice[currentStage][round];
		   
		   uint256 remainingToken = remainingToSell[currentStage];
		   uint256 requestedToken = amount * (10**18) / price;
		  
		   if(requestedToken > remainingToken)
		   {
			   amount = remainingToken * price / 10**18;
			   IERC20(USDT).safeTransferFrom(address(msg.sender), address(this), amount);
			   _buytokens(amount, remainingToken, address(msg.sender));	
			   emit TokensBought(address(msg.sender), remainingToken, amount);		   
		   } 
		   else
		   {
			   IERC20(USDT).safeTransferFrom(address(msg.sender), address(this), amount);
			   _buytokens(amount, requestedToken, address(msg.sender));
			   emit TokensBought(address(msg.sender), requestedToken, amount);
		   }
	   }
    }
	
	function buyWithETH() external payable {
	   uint256 amount = (getLatestPrice() * msg.value) / (10**30);
	   require(amount > 0, "Amount must be greater than zero");
	   require(presaleStatus, "Presale not start yet");
	   require(USDThreshold >= amount + mapBuyTokenInfo[address(msg.sender)].USDPaid, "Buy limit exceeded");
	   
	   uint256 currentRound = (block.timestamp - startTime) / 604800;
	   if(currentRound > 3)
	   {
	       _updateStage();
	   }
	   if(currentStage > 4)
	   {
	       presaleStatus = false;
		   claimStatus = true;
	   }
	   else
	   {
	      uint256 round = (block.timestamp - startTime) / 604800;
		          round = round > 3 ? 3 : round;
		  uint256 price = tokenPrice[currentStage][round];
		  
		  uint256 remainingToken = remainingToSell[currentStage];
		  uint256 requestedToken = amount * (10**18) / price;
		  
		  if(requestedToken > remainingToken)
		  {
			 amount = remainingToken * price / 10**18;
			 _buytokens(amount, remainingToken, address(msg.sender));	
			 emit TokensBought(address(msg.sender), remainingToken, amount);		   
		  } 
		  else
		  {
			 _buytokens(amount, requestedToken, address(msg.sender));
			 emit TokensBought(address(msg.sender), requestedToken, amount);
		  }	 
	   }
    }
	
	function privateSaleBuyers(uint256[] calldata tokens, address[] calldata buyers) external onlyOwner {
	   require(tokens.length == buyers.length, "Error: Array lengths do not match");
	   require(!presaleStatus && !claimStatus, "Presale is already start");
	   
	   for(uint256 i = 0; i < tokens.length; i++)
	   {
		   require(tokens[i] > 0, "Tokens must be greater than zero");
		   require(buyers[i] != address(0), "address cannot be zero");
   
		   uint256 price = tokenPrice[currentStage][0];
		   uint256 amount = tokens[i] * price / 10**18;
		   
		   require(USDThreshold >= (amount + mapBuyTokenInfo[address(buyers[i])].USDPaid), "Buy limit exceeded");
		   require(remainingToSell[currentStage] >= tokens[i], "Token not available for sale");
		   
		   _buytokens(amount, tokens[i], address(buyers[i]));
		   emit TokensBought(address(buyers[i]), tokens[i], amount);
	    } 
    }
	
	function _buytokens(uint256 amount, uint256 tokens, address buyer) internal {
		USDRaised += amount; 
		remainingToSell[currentStage] -= tokens;
		tokenSold += tokens;
		tokenToClaim += tokens;
		
		if(remainingToSell[currentStage] == 0)
		{
		   currentStage += 1;
		   startTime = block.timestamp;
		}
		if(currentStage > 4)
		{
		   presaleStatus = false;
		   claimStatus = true;
		}
		mapBuyTokenInfo[address(buyer)].USDPaid += amount;
		mapBuyTokenInfo[address(buyer)].tokenFromBuy += tokens;
	}
	
	function _updateStage() internal {
	    uint256 tokenToBurn = remainingToSell[currentStage];
	    if(tokenToBurn > 0)
	    {
		   IERC20(AIM).safeTransfer(address(burnWallet), tokenToBurn);
	    }
	    startTime += 2419200;
	    currentStage += 1;
	}
	
	function startPresale() external onlyOwner{
        require(!presaleStatus && !claimStatus, "Presale is already start");
		require(IERC20(AIM).balanceOf(address(this)) >= 150000000 * 10**18, "Token not available to start presale");
		
		startTime = block.timestamp;
        presaleStatus = true;
		emit PresaleStatusUpdated(true);
    }
	
	function claimToken() external{
		require(claimStatus, "Claim not start yet");
		
		uint256 pending = mapBuyTokenInfo[address(msg.sender)].tokenFromBuy - mapBuyTokenInfo[address(msg.sender)].clamedToken;
		if(pending > 0) 
		{
		    mapBuyTokenInfo[address(msg.sender)].clamedToken += pending;
		    IERC20(AIM).safeTransfer(address(msg.sender), pending);
		    emit TokensClaimed(address(msg.sender), pending, block.timestamp);
		}
    }
	
    function withdrawETH(address receiver, uint256 amount) public onlyOwner {
	   require(receiver != address(0), "address cannot be zero");
	   require(address(this).balance >= amount, "Tokens must be greater than zero");
	   
       (bool success, ) = address(receiver).call{value: amount}("");
	   require(success, "ETH withdraw failed");
    }
	
    function withdrawUSDT(address receiver, uint256 amount) public onlyOwner {
	   require(receiver != address(0), "address cannot be zero");
	   require(IERC20(USDT).balanceOf(address(this)) >= amount, "Tokens must be greater than zero");
	   
	   IERC20(USDT).safeTransfer(address(receiver), amount);
    }
	
	function getLatestPrice() public view returns (uint256) {
       (, int256 price, , , ) = aggregatorInterface.latestRoundData();
       price = (price * (10 ** 10));
       return uint256(price);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

{
  "compilationTarget": {
    "contracts/Presale.sol": "Presale"
  },
  "evmVersion": "shanghai",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}