// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/utils/Context.sol


pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/math/SafeMath.sol


pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol


pragma solidity >=0.6.0 <0.8.0;




/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: @openzeppelin/contracts/access/Ownable.sol


pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: contracts/Token.sol

pragma solidity ^0.6.0;








// ----------------------------------------------------------------------------
// BokkyPooBah's DateTime Library v1.01
//
// A gas-efficient Solidity date and time library
//
// https://github.com/bokkypoobah/BokkyPooBahsDateTimeLibrary
//
// Tested date range 1970/01/01 to 2345/12/31
//
// Conventions:
// Unit      | Range         | Notes
// :-------- |:-------------:|:-----
// timestamp | >= 0          | Unix timestamp, number of seconds since 1970/01/01 00:00:00 UTC
// year      | 1970 ... 2345 |
// month     | 1 ... 12      |
// day       | 1 ... 31      |
// hour      | 0 ... 23      |
// minute    | 0 ... 59      |
// second    | 0 ... 59      |
// dayOfWeek | 1 ... 7       | 1 = Monday, ..., 7 = Sunday
//
//
// Enjoy. (c) BokkyPooBah / Bok Consulting Pty Ltd 2018-2019. The MIT Licence.
// ----------------------------------------------------------------------------

library BokkyPooBahsDateTimeLibrary {

    uint constant SECONDS_PER_DAY = 24 * 60 * 60;
    uint constant SECONDS_PER_HOUR = 60 * 60;
    uint constant SECONDS_PER_MINUTE = 60;
    int constant OFFSET19700101 = 2440588;

    uint constant DOW_MON = 1;
    uint constant DOW_TUE = 2;
    uint constant DOW_WED = 3;
    uint constant DOW_THU = 4;
    uint constant DOW_FRI = 5;
    uint constant DOW_SAT = 6;
    uint constant DOW_SUN = 7;

    // ------------------------------------------------------------------------
    // Calculate the number of days from 1970/01/01 to year/month/day using
    // the date conversion algorithm from
    //   http://aa.usno.navy.mil/faq/docs/JD_Formula.php
    // and subtracting the offset 2440588 so that 1970/01/01 is day 0
    //
    // days = day
    //      - 32075
    //      + 1461 * (year + 4800 + (month - 14) / 12) / 4
    //      + 367 * (month - 2 - (month - 14) / 12 * 12) / 12
    //      - 3 * ((year + 4900 + (month - 14) / 12) / 100) / 4
    //      - offset
    // ------------------------------------------------------------------------
    function _daysFromDate(uint year, uint month, uint day) internal pure returns (uint _days) {
        require(year >= 1970);
        int _year = int(year);
        int _month = int(month);
        int _day = int(day);

        int __days = _day
          - 32075
          + 1461 * (_year + 4800 + (_month - 14) / 12) / 4
          + 367 * (_month - 2 - (_month - 14) / 12 * 12) / 12
          - 3 * ((_year + 4900 + (_month - 14) / 12) / 100) / 4
          - OFFSET19700101;

        _days = uint(__days);
    }

    // ------------------------------------------------------------------------
    // Calculate year/month/day from the number of days since 1970/01/01 using
    // the date conversion algorithm from
    //   http://aa.usno.navy.mil/faq/docs/JD_Formula.php
    // and adding the offset 2440588 so that 1970/01/01 is day 0
    //
    // int L = days + 68569 + offset
    // int N = 4 * L / 146097
    // L = L - (146097 * N + 3) / 4
    // year = 4000 * (L + 1) / 1461001
    // L = L - 1461 * year / 4 + 31
    // month = 80 * L / 2447
    // dd = L - 2447 * month / 80
    // L = month / 11
    // month = month + 2 - 12 * L
    // year = 100 * (N - 49) + year + L
    // ------------------------------------------------------------------------
    function _daysToDate(uint _days) internal pure returns (uint year, uint month, uint day) {
        int __days = int(_days);

        int L = __days + 68569 + OFFSET19700101;
        int N = 4 * L / 146097;
        L = L - (146097 * N + 3) / 4;
        int _year = 4000 * (L + 1) / 1461001;
        L = L - 1461 * _year / 4 + 31;
        int _month = 80 * L / 2447;
        int _day = L - 2447 * _month / 80;
        L = _month / 11;
        _month = _month + 2 - 12 * L;
        _year = 100 * (N - 49) + _year + L;

        year = uint(_year);
        month = uint(_month);
        day = uint(_day);
    }

    function timestampFromDate(uint year, uint month, uint day) internal pure returns (uint timestamp) {
        timestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY;
    }
    function timestampFromDateTime(uint year, uint month, uint day, uint hour, uint minute, uint second) internal pure returns (uint timestamp) {
        timestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + hour * SECONDS_PER_HOUR + minute * SECONDS_PER_MINUTE + second;
    }
    function timestampToDate(uint timestamp) internal pure returns (uint year, uint month, uint day) {
        (year, month, day) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }
    function timestampToDateTime(uint timestamp) internal pure returns (uint year, uint month, uint day, uint hour, uint minute, uint second) {
        (year, month, day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        uint secs = timestamp % SECONDS_PER_DAY;
        hour = secs / SECONDS_PER_HOUR;
        secs = secs % SECONDS_PER_HOUR;
        minute = secs / SECONDS_PER_MINUTE;
        second = secs % SECONDS_PER_MINUTE;
    }

    function isValidDate(uint year, uint month, uint day) internal pure returns (bool valid) {
        if (year >= 1970 && month > 0 && month <= 12) {
            uint daysInMonth = _getDaysInMonth(year, month);
            if (day > 0 && day <= daysInMonth) {
                valid = true;
            }
        }
    }
    function isValidDateTime(uint year, uint month, uint day, uint hour, uint minute, uint second) internal pure returns (bool valid) {
        if (isValidDate(year, month, day)) {
            if (hour < 24 && minute < 60 && second < 60) {
                valid = true;
            }
        }
    }
    function isLeapYear(uint timestamp) internal pure returns (bool leapYear) {
        (uint year,,) = _daysToDate(timestamp / SECONDS_PER_DAY);
        leapYear = _isLeapYear(year);
    }
    function _isLeapYear(uint year) internal pure returns (bool leapYear) {
        leapYear = ((year % 4 == 0) && (year % 100 != 0)) || (year % 400 == 0);
    }
    function isWeekDay(uint timestamp) internal pure returns (bool weekDay) {
        weekDay = getDayOfWeek(timestamp) <= DOW_FRI;
    }
    function isWeekEnd(uint timestamp) internal pure returns (bool weekEnd) {
        weekEnd = getDayOfWeek(timestamp) >= DOW_SAT;
    }
    function getDaysInMonth(uint timestamp) internal pure returns (uint daysInMonth) {
        (uint year, uint month,) = _daysToDate(timestamp / SECONDS_PER_DAY);
        daysInMonth = _getDaysInMonth(year, month);
    }
    function _getDaysInMonth(uint year, uint month) internal pure returns (uint daysInMonth) {
        if (month == 1 || month == 3 || month == 5 || month == 7 || month == 8 || month == 10 || month == 12) {
            daysInMonth = 31;
        } else if (month != 2) {
            daysInMonth = 30;
        } else {
            daysInMonth = _isLeapYear(year) ? 29 : 28;
        }
    }
    // 1 = Monday, 7 = Sunday
    function getDayOfWeek(uint timestamp) internal pure returns (uint dayOfWeek) {
        uint _days = timestamp / SECONDS_PER_DAY;
        dayOfWeek = (_days + 3) % 7 + 1;
    }

    function getYear(uint timestamp) internal pure returns (uint year) {
        (year,,) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }
    function getMonth(uint timestamp) internal pure returns (uint month) {
        (,month,) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }
    function getDay(uint timestamp) internal pure returns (uint day) {
        (,,day) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }
    function getHour(uint timestamp) internal pure returns (uint hour) {
        uint secs = timestamp % SECONDS_PER_DAY;
        hour = secs / SECONDS_PER_HOUR;
    }
    function getMinute(uint timestamp) internal pure returns (uint minute) {
        uint secs = timestamp % SECONDS_PER_HOUR;
        minute = secs / SECONDS_PER_MINUTE;
    }
    function getSecond(uint timestamp) internal pure returns (uint second) {
        second = timestamp % SECONDS_PER_MINUTE;
    }

    function addYears(uint timestamp, uint _years) internal pure returns (uint newTimestamp) {
        (uint year, uint month, uint day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        year += _years;
        uint daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + timestamp % SECONDS_PER_DAY;
        require(newTimestamp >= timestamp);
    }
    function addMonths(uint timestamp, uint _months) internal pure returns (uint newTimestamp) {
        (uint year, uint month, uint day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        month += _months;
        year += (month - 1) / 12;
        month = (month - 1) % 12 + 1;
        uint daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + timestamp % SECONDS_PER_DAY;
        require(newTimestamp >= timestamp);
    }
    function addDays(uint timestamp, uint _days) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp + _days * SECONDS_PER_DAY;
        require(newTimestamp >= timestamp);
    }
    function addHours(uint timestamp, uint _hours) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp + _hours * SECONDS_PER_HOUR;
        require(newTimestamp >= timestamp);
    }
    function addMinutes(uint timestamp, uint _minutes) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp + _minutes * SECONDS_PER_MINUTE;
        require(newTimestamp >= timestamp);
    }
    function addSeconds(uint timestamp, uint _seconds) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp + _seconds;
        require(newTimestamp >= timestamp);
    }

    function subYears(uint timestamp, uint _years) internal pure returns (uint newTimestamp) {
        (uint year, uint month, uint day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        year -= _years;
        uint daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + timestamp % SECONDS_PER_DAY;
        require(newTimestamp <= timestamp);
    }
    function subMonths(uint timestamp, uint _months) internal pure returns (uint newTimestamp) {
        (uint year, uint month, uint day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        uint yearMonth = year * 12 + (month - 1) - _months;
        year = yearMonth / 12;
        month = yearMonth % 12 + 1;
        uint daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + timestamp % SECONDS_PER_DAY;
        require(newTimestamp <= timestamp);
    }
    function subDays(uint timestamp, uint _days) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp - _days * SECONDS_PER_DAY;
        require(newTimestamp <= timestamp);
    }
    function subHours(uint timestamp, uint _hours) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp - _hours * SECONDS_PER_HOUR;
        require(newTimestamp <= timestamp);
    }
    function subMinutes(uint timestamp, uint _minutes) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp - _minutes * SECONDS_PER_MINUTE;
        require(newTimestamp <= timestamp);
    }
    function subSeconds(uint timestamp, uint _seconds) internal pure returns (uint newTimestamp) {
        newTimestamp = timestamp - _seconds;
        require(newTimestamp <= timestamp);
    }

    function diffYears(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _years) {
        require(fromTimestamp <= toTimestamp);
        (uint fromYear,,) = _daysToDate(fromTimestamp / SECONDS_PER_DAY);
        (uint toYear,,) = _daysToDate(toTimestamp / SECONDS_PER_DAY);
        _years = toYear - fromYear;
    }
    function diffMonths(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _months) {
        require(fromTimestamp <= toTimestamp);
        (uint fromYear, uint fromMonth,) = _daysToDate(fromTimestamp / SECONDS_PER_DAY);
        (uint toYear, uint toMonth,) = _daysToDate(toTimestamp / SECONDS_PER_DAY);
        _months = toYear * 12 + toMonth - fromYear * 12 - fromMonth;
    }
    function diffDays(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _days) {
        require(fromTimestamp <= toTimestamp);
        _days = (toTimestamp - fromTimestamp) / SECONDS_PER_DAY;
    }
    function diffHours(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _hours) {
        require(fromTimestamp <= toTimestamp);
        _hours = (toTimestamp - fromTimestamp) / SECONDS_PER_HOUR;
    }
    function diffMinutes(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _minutes) {
        require(fromTimestamp <= toTimestamp);
        _minutes = (toTimestamp - fromTimestamp) / SECONDS_PER_MINUTE;
    }
    function diffSeconds(uint fromTimestamp, uint toTimestamp) internal pure returns (uint _seconds) {
        require(fromTimestamp <= toTimestamp);
        _seconds = toTimestamp - fromTimestamp;
    }
}

// ----------------------------------------------------------------------------
// Testing BokkyPooBah's DateTime Library
//
// https://github.com/bokkypoobah/BokkyPooBahsDateTimeLibrary
//
// Enjoy. (c) BokkyPooBah / Bok Consulting Pty Ltd 2018-2019. The MIT Licence.
// ----------------------------------------------------------------------------

contract TestDateTime {
    using BokkyPooBahsDateTimeLibrary for uint;

    uint public nextYear;

    function test() public {
        uint today = now;
        nextYear = today.addYears(1);
    }

    function timestampFromDate(uint year, uint month, uint day) public pure returns (uint timestamp) {
        return BokkyPooBahsDateTimeLibrary.timestampFromDate(year, month, day);
    }
    function timestampFromDateTime(uint year, uint month, uint day, uint hour, uint minute, uint second) public pure returns (uint timestamp) {
        return BokkyPooBahsDateTimeLibrary.timestampFromDateTime(year, month, day, hour, minute, second);
    }
    function timestampToDate(uint timestamp) public pure returns (uint year, uint month, uint day) {
        (year, month, day) = BokkyPooBahsDateTimeLibrary.timestampToDate(timestamp);
    }
    function timestampToDateTime(uint timestamp) public pure returns (uint year, uint month, uint day, uint hour, uint minute, uint second) {
        (year, month, day, hour, minute, second) = BokkyPooBahsDateTimeLibrary.timestampToDateTime(timestamp);
    }

    function isLeapYear(uint timestamp) public pure returns (bool leapYear) {
        leapYear = BokkyPooBahsDateTimeLibrary.isLeapYear(timestamp);
    }
    function _isLeapYear(uint year) public pure returns (bool leapYear) {
        leapYear = BokkyPooBahsDateTimeLibrary._isLeapYear(year);
    }
    function isWeekDay(uint timestamp) public pure returns (bool weekDay) {
        weekDay = BokkyPooBahsDateTimeLibrary.isWeekDay(timestamp);
    }
    function isWeekEnd(uint timestamp) public pure returns (bool weekEnd) {
        weekEnd = BokkyPooBahsDateTimeLibrary.isWeekEnd(timestamp);
    }

    function getDaysInMonth(uint timestamp) public pure returns (uint daysInMonth) {
        daysInMonth = BokkyPooBahsDateTimeLibrary.getDaysInMonth(timestamp);
    }
    function _getDaysInMonth(uint year, uint month) public pure returns (uint daysInMonth) {
        daysInMonth = BokkyPooBahsDateTimeLibrary._getDaysInMonth(year, month);
    }
    function getDayOfWeek(uint timestamp) public pure returns (uint dayOfWeek) {
        dayOfWeek = BokkyPooBahsDateTimeLibrary.getDayOfWeek(timestamp);
    }

    function isValidDate(uint year, uint month, uint day) public pure returns (bool valid) {
        valid = BokkyPooBahsDateTimeLibrary.isValidDate(year, month, day);
    }
    function isValidDateTime(uint year, uint month, uint day, uint hour, uint minute, uint second) public pure returns (bool valid) {
        valid = BokkyPooBahsDateTimeLibrary.isValidDateTime(year, month, day, hour, minute, second);
    }

    function getYear(uint timestamp) public pure returns (uint year) {
        year = BokkyPooBahsDateTimeLibrary.getYear(timestamp);
    }
    function getMonth(uint timestamp) public pure returns (uint month) {
        month = BokkyPooBahsDateTimeLibrary.getMonth(timestamp);
    }
    function getDay(uint timestamp) public pure returns (uint day) {
        day = BokkyPooBahsDateTimeLibrary.getDay(timestamp);
    }
    function getHour(uint timestamp) public pure returns (uint hour) {
        hour = BokkyPooBahsDateTimeLibrary.getHour(timestamp);
    }
    function getMinute(uint timestamp) public pure returns (uint minute) {
        minute = BokkyPooBahsDateTimeLibrary.getMinute(timestamp);
    }
    function getSecond(uint timestamp) public pure returns (uint second) {
        second = BokkyPooBahsDateTimeLibrary.getSecond(timestamp);
    }

    function addYears(uint timestamp, uint _years) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.addYears(timestamp, _years);
    }
    function addMonths(uint timestamp, uint _months) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.addMonths(timestamp, _months);
    }
    function addDays(uint timestamp, uint _days) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.addDays(timestamp, _days);
    }
    function addHours(uint timestamp, uint _hours) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.addHours(timestamp, _hours);
    }
    function addMinutes(uint timestamp, uint _minutes) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.addMinutes(timestamp, _minutes);
    }
    function addSeconds(uint timestamp, uint _seconds) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.addSeconds(timestamp, _seconds);
    }

    function subYears(uint timestamp, uint _years) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.subYears(timestamp, _years);
    }
    function subMonths(uint timestamp, uint _months) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.subMonths(timestamp, _months);
    }
    function subDays(uint timestamp, uint _days) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.subDays(timestamp, _days);
    }
    function subHours(uint timestamp, uint _hours) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.subHours(timestamp, _hours);
    }
    function subMinutes(uint timestamp, uint _minutes) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.subMinutes(timestamp, _minutes);
    }
    function subSeconds(uint timestamp, uint _seconds) public pure returns (uint newTimestamp) {
        newTimestamp = BokkyPooBahsDateTimeLibrary.subSeconds(timestamp, _seconds);
    }

    function diffYears(uint fromTimestamp, uint toTimestamp) public pure returns (uint _years) {
        _years = BokkyPooBahsDateTimeLibrary.diffYears(fromTimestamp, toTimestamp);
    }
    function diffMonths(uint fromTimestamp, uint toTimestamp) public pure returns (uint _months) {
        _months = BokkyPooBahsDateTimeLibrary.diffMonths(fromTimestamp, toTimestamp);
    }
    function diffDays(uint fromTimestamp, uint toTimestamp) public pure returns (uint _days) {
        _days = BokkyPooBahsDateTimeLibrary.diffDays(fromTimestamp, toTimestamp);
    }
    function diffHours(uint fromTimestamp, uint toTimestamp) public pure returns (uint _hours) {
        _hours = BokkyPooBahsDateTimeLibrary.diffHours(fromTimestamp, toTimestamp);
    }
    function diffMinutes(uint fromTimestamp, uint toTimestamp) public pure returns (uint _minutes) {
        _minutes = BokkyPooBahsDateTimeLibrary.diffMinutes(fromTimestamp, toTimestamp);
    }
    function diffSeconds(uint fromTimestamp, uint toTimestamp) public pure returns (uint _seconds) {
        _seconds = BokkyPooBahsDateTimeLibrary.diffSeconds(fromTimestamp, toTimestamp);
    }
}



contract Artemis is Ownable, ERC20 {
    
    using BokkyPooBahsDateTimeLibrary for uint;
    using SafeMath for uint256;

    uint256 public MAX_SUPPLY =  10000000 * 10**18;
    uint public last_development_withdrawal_time;
    //TOKENS ALLOTMENT
    uint256 public STAKING_RESERVE =  1670000 * 10**18;
    uint256 public TEAM_AND_ADVISOR_RESERVE =  240000 * 10**18;
    uint256 public DEVELOPMENT_RESERVE =  200000 * 10**18;
    uint256 public MARKETING_AND_LISTING_RESERVE =  400000 * 10**18;
    uint256 public MINTABLE_SUPPLY =  7000000 * 10**18;
    uint256 public TOTAL_MINTABLE_MINTED =  0;
    uint256 public PARTNERSHIP_INTERGRATION_RESERVE =  490000 * 10**18;





    address public _stakingWallet;
    address public _teamWallet;
    address public _developmentWallet;
    address public _marketingWallet;
    address public _partnershipIntegrationWallet;



    function checkTeamWalletWithdrawalEligiblity() private returns(bool){
        if(last_development_withdrawal_time ==0){
            return true;
        }
        uint _days = BokkyPooBahsDateTimeLibrary.diffDays(last_development_withdrawal_time, now);

        if(_days>30){
            return true;
        }else{
            return false;
        }
    }



    function claimTeamTokens()public{
        require(checkTeamWalletWithdrawalEligiblity(),"1 month has not passed please try after one month");

        require(msg.sender == _teamWallet,"You are not authorized");
        require(TEAM_AND_ADVISOR_RESERVE >0,"Development Reserve Empty");
        uint256 amount =  20000 * 10**18;
        _mint(_teamWallet, amount);
        last_development_withdrawal_time = now;
        TEAM_AND_ADVISOR_RESERVE = TEAM_AND_ADVISOR_RESERVE.sub(amount);
    }


    function claimDevelopmentTokens()public{

        
         require(msg.sender == _developmentWallet,"You are not authorized");
        _mint(_developmentWallet, DEVELOPMENT_RESERVE);
        DEVELOPMENT_RESERVE = 0;
    }

    function claimMarketingTokens()public{
        require(msg.sender == _marketingWallet,"You are not authorized");
        _mint(_marketingWallet, MARKETING_AND_LISTING_RESERVE);
        MARKETING_AND_LISTING_RESERVE = 0;

    }
    
    
     function claimPartnershipAndIntegrationTokens()public{
        require(msg.sender == _partnershipIntegrationWallet,"You are not authorized");
        _mint(_partnershipIntegrationWallet, PARTNERSHIP_INTERGRATION_RESERVE);
        PARTNERSHIP_INTERGRATION_RESERVE = 0;

    }

    function claimStakingTokens()public{
        require(msg.sender == _stakingWallet,"You are not authorized");
        _mint(_stakingWallet, STAKING_RESERVE);
        STAKING_RESERVE=0;
    }



    constructor(address stakingWallet,
                address  teamWallet,
                address  developmentWallet,
                address marketingWallet,
                address partnershipIntegrationWallet)
                 public ERC20("Artemis Vision", "ARV") {


        _stakingWallet = stakingWallet;
        _teamWallet = teamWallet;
        _developmentWallet = developmentWallet;
        _marketingWallet = marketingWallet;

        _partnershipIntegrationWallet = partnershipIntegrationWallet;
                  
                     
 }

   
   
   
   
    function mint(address account, uint256 amount) public onlyOwner {
        require(TOTAL_MINTABLE_MINTED.add(amount)<=MINTABLE_SUPPLY,"Max Supply Exceeds");
        _mint(account, amount);
        TOTAL_MINTABLE_MINTED = TOTAL_MINTABLE_MINTED.add(amount);
    }



   
    function burn(address account, uint256 amount) public onlyOwner {
        _burn(account, amount);
    }

    function recoverERC20( uint256 tokenAmount) public virtual onlyOwner {
        IERC20(address(this)).transfer(owner(), tokenAmount);
    }
}

{
  "compilationTarget": {
    "Artemis.sol": "Artemis"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}