/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.7.6;

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title IMessageHandler
 * @notice Handles messages on destination domain forwarded from
 * an IReceiver
 */
interface IMessageHandler {
    /**
     * @notice handles an incoming message from a Receiver
     * @param sourceDomain the source domain of the message
     * @param sender the sender of the message
     * @param messageBody The message raw bytes
     * @return success bool, true if successful
     */
    function handleReceiveMessage(
        uint32 sourceDomain,
        bytes32 sender,
        bytes calldata messageBody
    ) external returns (bool);
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title ITokenMinter
 * @notice interface for minter of tokens that are mintable, burnable, and interchangeable
 * across domains.
 */
interface ITokenMinter {
    /**
     * @notice Mints `amount` of local tokens corresponding to the
     * given (`sourceDomain`, `burnToken`) pair, to `to` address.
     * @dev reverts if the (`sourceDomain`, `burnToken`) pair does not
     * map to a nonzero local token address. This mapping can be queried using
     * getLocalToken().
     * @param sourceDomain Source domain where `burnToken` was burned.
     * @param burnToken Burned token address as bytes32.
     * @param to Address to receive minted tokens, corresponding to `burnToken`,
     * on this domain.
     * @param amount Amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of this TokenMinter for given `_mintToken`.
     * @return mintToken token minted.
     */
    function mint(
        uint32 sourceDomain,
        bytes32 burnToken,
        address to,
        uint256 amount
    ) external returns (address mintToken);

    /**
     * @notice Burn tokens owned by this ITokenMinter.
     * @param burnToken burnable token.
     * @param amount amount of tokens to burn. Must be less than or equal to this ITokenMinter's
     * account balance of the given `_burnToken`.
     */
    function burn(address burnToken, uint256 amount) external;

    /**
     * @notice Get the local token associated with the given remote domain and token.
     * @param remoteDomain Remote domain
     * @param remoteToken Remote token
     * @return local token address
     */
    function getLocalToken(uint32 remoteDomain, bytes32 remoteToken)
        external
        view
        returns (address);

    /**
     * @notice Set the token controller of this ITokenMinter. Token controller
     * is responsible for mapping local tokens to remote tokens, and managing
     * token-specific limits
     * @param newTokenController new token controller address
     */
    function setTokenController(address newTokenController) external;
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

/**
 * @title IMintBurnToken
 * @notice interface for mintable and burnable ERC20 token
 */
interface IMintBurnToken is IERC20 {
    /**
     * @dev Function to mint tokens
     * @param to The address that will receive the minted tokens.
     * @param amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(address to, uint256 amount) external returns (bool);

    /**
     * @dev allows a minter to burn some of its own tokens
     * Validates that caller is a minter and that sender is not blacklisted
     * amount is less than or equal to the minter's account balance
     * @param amount uint256 the amount of tokens to be burned
     */
    function burn(uint256 amount) external;
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title IRelayer
 * @notice Sends messages from source domain to destination domain
 */
interface IRelayer {
    /**
     * @notice Sends an outgoing message from the source domain.
     * @dev Increment nonce, format the message, and emit `MessageSent` event with message information.
     * @param destinationDomain Domain of destination chain
     * @param recipient Address of message recipient on destination domain as bytes32
     * @param messageBody Raw bytes content of message
     * @return nonce reserved by message
     */
    function sendMessage(
        uint32 destinationDomain,
        bytes32 recipient,
        bytes calldata messageBody
    ) external returns (uint64);

    /**
     * @notice Sends an outgoing message from the source domain, with a specified caller on the
     * destination domain.
     * @dev Increment nonce, format the message, and emit `MessageSent` event with message information.
     * WARNING: if the `destinationCaller` does not represent a valid address as bytes32, then it will not be possible
     * to broadcast the message on the destination domain. This is an advanced feature, and the standard
     * sendMessage() should be preferred for use cases where a specific destination caller is not required.
     * @param destinationDomain Domain of destination chain
     * @param recipient Address of message recipient on destination domain as bytes32
     * @param destinationCaller caller on the destination domain, as bytes32
     * @param messageBody Raw bytes content of message
     * @return nonce reserved by message
     */
    function sendMessageWithCaller(
        uint32 destinationDomain,
        bytes32 recipient,
        bytes32 destinationCaller,
        bytes calldata messageBody
    ) external returns (uint64);

    /**
     * @notice Replace a message with a new message body and/or destination caller.
     * @dev The `originalAttestation` must be a valid attestation of `originalMessage`.
     * @param originalMessage original message to replace
     * @param originalAttestation attestation of `originalMessage`
     * @param newMessageBody new message body of replaced message
     * @param newDestinationCaller the new destination caller
     */
    function replaceMessage(
        bytes calldata originalMessage,
        bytes calldata originalAttestation,
        bytes calldata newMessageBody,
        bytes32 newDestinationCaller
    ) external;
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title IReceiver
 * @notice Receives messages on destination chain and forwards them to IMessageDestinationHandler
 */
interface IReceiver {
    /**
     * @notice Receives an incoming message, validating the header and passing
     * the body to application-specific handler.
     * @param message The message raw bytes
     * @param signature The message signature
     * @return success bool, true if successful
     */
    function receiveMessage(bytes calldata message, bytes calldata signature)
        external
        returns (bool success);
}

/**
 * @title IMessageTransmitter
 * @notice Interface for message transmitters, which both relay and receive messages.
 */
interface IMessageTransmitter is IRelayer, IReceiver {

}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
The MIT License (MIT)

Copyright (c) 2016 Smart Contract Solutions, Inc.

Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:

The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

/**
 * @title SafeMath_TMV
 * @dev Math operations with safety checks that throw on error
 * @notice SafeMath_TMV is the version of SafeMath used by TypedMemView
 */
library SafeMath_TMV {
    /**
     * @dev Multiplies two numbers, throws on overflow.
     */
    function mul(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
        // Gas optimization: this is cheaper than asserting 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (_a == 0) {
            return 0;
        }

        c = _a * _b;
        require(c / _a == _b, "Overflow during multiplication.");
        return c;
    }

    /**
     * @dev Integer division of two numbers, truncating the quotient.
     */
    function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
        // assert(_b > 0); // Solidity automatically throws when dividing by 0
        // uint256 c = _a / _b;
        // assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold
        return _a / _b;
    }

    /**
     * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
     */
    function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
        require(_b <= _a, "Underflow during subtraction.");
        return _a - _b;
    }

    /**
     * @dev Adds two numbers, throws on overflow.
     */
    function add(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
        c = _a + _b;
        require(c >= _a, "Overflow during addition.");
        return c;
    }
}

library TypedMemView {
    using SafeMath_TMV for uint256;

    // Why does this exist?
    // the solidity `bytes memory` type has a few weaknesses.
    // 1. You can't index ranges effectively
    // 2. You can't slice without copying
    // 3. The underlying data may represent any type
    // 4. Solidity never deallocates memory, and memory costs grow
    //    superlinearly

    // By using a memory view instead of a `bytes memory` we get the following
    // advantages:
    // 1. Slices are done on the stack, by manipulating the pointer
    // 2. We can index arbitrary ranges and quickly convert them to stack types
    // 3. We can insert type info into the pointer, and typecheck at runtime

    // This makes `TypedMemView` a useful tool for efficient zero-copy
    // algorithms.

    // Why bytes29?
    // We want to avoid confusion between views, digests, and other common
    // types so we chose a large and uncommonly used odd number of bytes
    //
    // Note that while bytes are left-aligned in a word, integers and addresses
    // are right-aligned. This means when working in assembly we have to
    // account for the 3 unused bytes on the righthand side
    //
    // First 5 bytes are a type flag.
    // - ff_ffff_fffe is reserved for unknown type.
    // - ff_ffff_ffff is reserved for invalid types/errors.
    // next 12 are memory address
    // next 12 are len
    // bottom 3 bytes are empty

    // Assumptions:
    // - non-modification of memory.
    // - No Solidity updates
    // - - wrt free mem point
    // - - wrt bytes representation in memory
    // - - wrt memory addressing in general

    // Usage:
    // - create type constants
    // - use `assertType` for runtime type assertions
    // - - unfortunately we can't do this at compile time yet :(
    // - recommended: implement modifiers that perform type checking
    // - - e.g.
    // - - `uint40 constant MY_TYPE = 3;`
    // - - ` modifer onlyMyType(bytes29 myView) { myView.assertType(MY_TYPE); }`
    // - instantiate a typed view from a bytearray using `ref`
    // - use `index` to inspect the contents of the view
    // - use `slice` to create smaller views into the same memory
    // - - `slice` can increase the offset
    // - - `slice can decrease the length`
    // - - must specify the output type of `slice`
    // - - `slice` will return a null view if you try to overrun
    // - - make sure to explicitly check for this with `notNull` or `assertType`
    // - use `equal` for typed comparisons.

    // The null view
    bytes29 public constant NULL =
        hex"ffffffffffffffffffffffffffffffffffffffffffffffffffffffffff";
    uint256 constant LOW_12_MASK = 0xffffffffffffffffffffffff;
    uint8 constant TWELVE_BYTES = 96;

    /**
     * @notice      Returns the encoded hex character that represents the lower 4 bits of the argument.
     * @param _b    The byte
     * @return      char - The encoded hex character
     */
    function nibbleHex(uint8 _b) internal pure returns (uint8 char) {
        // This can probably be done more efficiently, but it's only in error
        // paths, so we don't really care :)
        uint8 _nibble = _b | 0xf0; // set top 4, keep bottom 4
        if (_nibble == 0xf0) {
            return 0x30;
        } // 0
        if (_nibble == 0xf1) {
            return 0x31;
        } // 1
        if (_nibble == 0xf2) {
            return 0x32;
        } // 2
        if (_nibble == 0xf3) {
            return 0x33;
        } // 3
        if (_nibble == 0xf4) {
            return 0x34;
        } // 4
        if (_nibble == 0xf5) {
            return 0x35;
        } // 5
        if (_nibble == 0xf6) {
            return 0x36;
        } // 6
        if (_nibble == 0xf7) {
            return 0x37;
        } // 7
        if (_nibble == 0xf8) {
            return 0x38;
        } // 8
        if (_nibble == 0xf9) {
            return 0x39;
        } // 9
        if (_nibble == 0xfa) {
            return 0x61;
        } // a
        if (_nibble == 0xfb) {
            return 0x62;
        } // b
        if (_nibble == 0xfc) {
            return 0x63;
        } // c
        if (_nibble == 0xfd) {
            return 0x64;
        } // d
        if (_nibble == 0xfe) {
            return 0x65;
        } // e
        if (_nibble == 0xff) {
            return 0x66;
        } // f
    }

    /**
     * @notice      Returns a uint16 containing the hex-encoded byte.
     * @param _b    The byte
     * @return      encoded - The hex-encoded byte
     */
    function byteHex(uint8 _b) internal pure returns (uint16 encoded) {
        encoded |= nibbleHex(_b >> 4); // top 4 bits
        encoded <<= 8;
        encoded |= nibbleHex(_b); // lower 4 bits
    }

    /**
     * @notice      Encodes the uint256 to hex. `first` contains the encoded top 16 bytes.
     *              `second` contains the encoded lower 16 bytes.
     *
     * @param _b    The 32 bytes as uint256
     * @return      first - The top 16 bytes
     * @return      second - The bottom 16 bytes
     */
    function encodeHex(uint256 _b)
        internal
        pure
        returns (uint256 first, uint256 second)
    {
        for (uint8 i = 31; i > 15; i -= 1) {
            uint8 _byte = uint8(_b >> (i * 8));
            first |= byteHex(_byte);
            if (i != 16) {
                first <<= 16;
            }
        }

        // abusing underflow here =_=
        for (uint8 i = 15; i < 255; i -= 1) {
            uint8 _byte = uint8(_b >> (i * 8));
            second |= byteHex(_byte);
            if (i != 0) {
                second <<= 16;
            }
        }
    }

    /**
     * @notice          Changes the endianness of a uint256.
     * @dev             https://graphics.stanford.edu/~seander/bithacks.html#ReverseParallel
     * @param _b        The unsigned integer to reverse
     * @return          v - The reversed value
     */
    function reverseUint256(uint256 _b) internal pure returns (uint256 v) {
        v = _b;

        // swap bytes
        v =
            ((v >> 8) &
                0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) |
            ((v &
                0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) <<
                8);
        // swap 2-byte long pairs
        v =
            ((v >> 16) &
                0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) |
            ((v &
                0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) <<
                16);
        // swap 4-byte long pairs
        v =
            ((v >> 32) &
                0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) |
            ((v &
                0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) <<
                32);
        // swap 8-byte long pairs
        v =
            ((v >> 64) &
                0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) |
            ((v &
                0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) <<
                64);
        // swap 16-byte long pairs
        v = (v >> 128) | (v << 128);
    }

    /**
     * @notice      Create a mask with the highest `_len` bits set.
     * @param _len  The length
     * @return      mask - The mask
     */
    function leftMask(uint8 _len) private pure returns (uint256 mask) {
        // ugly. redo without assembly?
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            mask := sar(
                sub(_len, 1),
                0x8000000000000000000000000000000000000000000000000000000000000000
            )
        }
    }

    /**
     * @notice      Return the null view.
     * @return      bytes29 - The null view
     */
    function nullView() internal pure returns (bytes29) {
        return NULL;
    }

    /**
     * @notice      Check if the view is null.
     * @return      bool - True if the view is null
     */
    function isNull(bytes29 memView) internal pure returns (bool) {
        return memView == NULL;
    }

    /**
     * @notice      Check if the view is not null.
     * @return      bool - True if the view is not null
     */
    function notNull(bytes29 memView) internal pure returns (bool) {
        return !isNull(memView);
    }

    /**
     * @notice          Check if the view is of a valid type and points to a valid location
     *                  in memory.
     * @dev             We perform this check by examining solidity's unallocated memory
     *                  pointer and ensuring that the view's upper bound is less than that.
     * @param memView   The view
     * @return          ret - True if the view is valid
     */
    function isValid(bytes29 memView) internal pure returns (bool ret) {
        if (typeOf(memView) == 0xffffffffff) {
            return false;
        }
        uint256 _end = end(memView);
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            ret := not(gt(_end, mload(0x40)))
        }
    }

    /**
     * @notice          Require that a typed memory view be valid.
     * @dev             Returns the view for easy chaining.
     * @param memView   The view
     * @return          bytes29 - The validated view
     */
    function assertValid(bytes29 memView) internal pure returns (bytes29) {
        require(isValid(memView), "Validity assertion failed");
        return memView;
    }

    /**
     * @notice          Return true if the memview is of the expected type. Otherwise false.
     * @param memView   The view
     * @param _expected The expected type
     * @return          bool - True if the memview is of the expected type
     */
    function isType(bytes29 memView, uint40 _expected)
        internal
        pure
        returns (bool)
    {
        return typeOf(memView) == _expected;
    }

    /**
     * @notice          Require that a typed memory view has a specific type.
     * @dev             Returns the view for easy chaining.
     * @param memView   The view
     * @param _expected The expected type
     * @return          bytes29 - The view with validated type
     */
    function assertType(bytes29 memView, uint40 _expected)
        internal
        pure
        returns (bytes29)
    {
        if (!isType(memView, _expected)) {
            (, uint256 g) = encodeHex(uint256(typeOf(memView)));
            (, uint256 e) = encodeHex(uint256(_expected));
            string memory err = string(
                abi.encodePacked(
                    "Type assertion failed. Got 0x",
                    uint80(g),
                    ". Expected 0x",
                    uint80(e)
                )
            );
            revert(err);
        }
        return memView;
    }

    /**
     * @notice          Return an identical view with a different type.
     * @param memView   The view
     * @param _newType  The new type
     * @return          newView - The new view with the specified type
     */
    function castTo(bytes29 memView, uint40 _newType)
        internal
        pure
        returns (bytes29 newView)
    {
        // then | in the new type
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            // shift off the top 5 bytes
            newView := or(newView, shr(40, shl(40, memView)))
            newView := or(newView, shl(216, _newType))
        }
    }

    /**
     * @notice          Unsafe raw pointer construction. This should generally not be called
     *                  directly. Prefer `ref` wherever possible.
     * @dev             Unsafe raw pointer construction. This should generally not be called
     *                  directly. Prefer `ref` wherever possible.
     * @param _type     The type
     * @param _loc      The memory address
     * @param _len      The length
     * @return          newView - The new view with the specified type, location and length
     */
    function unsafeBuildUnchecked(
        uint256 _type,
        uint256 _loc,
        uint256 _len
    ) private pure returns (bytes29 newView) {
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            newView := shl(96, or(newView, _type)) // insert type
            newView := shl(96, or(newView, _loc)) // insert loc
            newView := shl(24, or(newView, _len)) // empty bottom 3 bytes
        }
    }

    /**
     * @notice          Instantiate a new memory view. This should generally not be called
     *                  directly. Prefer `ref` wherever possible.
     * @dev             Instantiate a new memory view. This should generally not be called
     *                  directly. Prefer `ref` wherever possible.
     * @param _type     The type
     * @param _loc      The memory address
     * @param _len      The length
     * @return          newView - The new view with the specified type, location and length
     */
    function build(
        uint256 _type,
        uint256 _loc,
        uint256 _len
    ) internal pure returns (bytes29 newView) {
        uint256 _end = _loc.add(_len);
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            if gt(_end, mload(0x40)) {
                _end := 0
            }
        }
        if (_end == 0) {
            return NULL;
        }
        newView = unsafeBuildUnchecked(_type, _loc, _len);
    }

    /**
     * @notice          Instantiate a memory view from a byte array.
     * @dev             Note that due to Solidity memory representation, it is not possible to
     *                  implement a deref, as the `bytes` type stores its len in memory.
     * @param arr       The byte array
     * @param newType   The type
     * @return          bytes29 - The memory view
     */
    function ref(bytes memory arr, uint40 newType)
        internal
        pure
        returns (bytes29)
    {
        uint256 _len = arr.length;

        uint256 _loc;
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            _loc := add(arr, 0x20) // our view is of the data, not the struct
        }

        return build(newType, _loc, _len);
    }

    /**
     * @notice          Return the associated type information.
     * @param memView   The memory view
     * @return          _type - The type associated with the view
     */
    function typeOf(bytes29 memView) internal pure returns (uint40 _type) {
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            // 216 == 256 - 40
            _type := shr(216, memView) // shift out lower 24 bytes
        }
    }

    /**
     * @notice          Optimized type comparison. Checks that the 5-byte type flag is equal.
     * @param left      The first view
     * @param right     The second view
     * @return          bool - True if the 5-byte type flag is equal
     */
    function sameType(bytes29 left, bytes29 right)
        internal
        pure
        returns (bool)
    {
        return (left ^ right) >> (2 * TWELVE_BYTES) == 0;
    }

    /**
     * @notice          Return the memory address of the underlying bytes.
     * @param memView   The view
     * @return          _loc - The memory address
     */
    function loc(bytes29 memView) internal pure returns (uint96 _loc) {
        uint256 _mask = LOW_12_MASK; // assembly can't use globals
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            // 120 bits = 12 bytes (the encoded loc) + 3 bytes (empty low space)
            _loc := and(shr(120, memView), _mask)
        }
    }

    /**
     * @notice          The number of memory words this memory view occupies, rounded up.
     * @param memView   The view
     * @return          uint256 - The number of memory words
     */
    function words(bytes29 memView) internal pure returns (uint256) {
        return uint256(len(memView)).add(32) / 32;
    }

    /**
     * @notice          The in-memory footprint of a fresh copy of the view.
     * @param memView   The view
     * @return          uint256 - The in-memory footprint of a fresh copy of the view.
     */
    function footprint(bytes29 memView) internal pure returns (uint256) {
        return words(memView) * 32;
    }

    /**
     * @notice          The number of bytes of the view.
     * @param memView   The view
     * @return          _len - The length of the view
     */
    function len(bytes29 memView) internal pure returns (uint96 _len) {
        uint256 _mask = LOW_12_MASK; // assembly can't use globals
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            _len := and(shr(24, memView), _mask)
        }
    }

    /**
     * @notice          Returns the endpoint of `memView`.
     * @param memView   The view
     * @return          uint256 - The endpoint of `memView`
     */
    function end(bytes29 memView) internal pure returns (uint256) {
        return loc(memView) + len(memView);
    }

    /**
     * @notice          Safe slicing without memory modification.
     * @param memView   The view
     * @param _index    The start index
     * @param _len      The length
     * @param newType   The new type
     * @return          bytes29 - The new view
     */
    function slice(
        bytes29 memView,
        uint256 _index,
        uint256 _len,
        uint40 newType
    ) internal pure returns (bytes29) {
        uint256 _loc = loc(memView);

        // Ensure it doesn't overrun the view
        if (_loc.add(_index).add(_len) > end(memView)) {
            return NULL;
        }

        _loc = _loc.add(_index);
        return build(newType, _loc, _len);
    }

    /**
     * @notice          Shortcut to `slice`. Gets a view representing the first `_len` bytes.
     * @param memView   The view
     * @param _len      The length
     * @param newType   The new type
     * @return          bytes29 - The new view
     */
    function prefix(
        bytes29 memView,
        uint256 _len,
        uint40 newType
    ) internal pure returns (bytes29) {
        return slice(memView, 0, _len, newType);
    }

    /**
     * @notice          Shortcut to `slice`. Gets a view representing the last `_len` byte.
     * @param memView   The view
     * @param _len      The length
     * @param newType   The new type
     * @return          bytes29 - The new view
     */
    function postfix(
        bytes29 memView,
        uint256 _len,
        uint40 newType
    ) internal pure returns (bytes29) {
        return slice(memView, uint256(len(memView)).sub(_len), _len, newType);
    }

    /**
     * @notice          Construct an error message for an indexing overrun.
     * @param _loc      The memory address
     * @param _len      The length
     * @param _index    The index
     * @param _slice    The slice where the overrun occurred
     * @return          err - The err
     */
    function indexErrOverrun(
        uint256 _loc,
        uint256 _len,
        uint256 _index,
        uint256 _slice
    ) internal pure returns (string memory err) {
        (, uint256 a) = encodeHex(_loc);
        (, uint256 b) = encodeHex(_len);
        (, uint256 c) = encodeHex(_index);
        (, uint256 d) = encodeHex(_slice);
        err = string(
            abi.encodePacked(
                "TypedMemView/index - Overran the view. Slice is at 0x",
                uint48(a),
                " with length 0x",
                uint48(b),
                ". Attempted to index at offset 0x",
                uint48(c),
                " with length 0x",
                uint48(d),
                "."
            )
        );
    }

    /**
     * @notice          Load up to 32 bytes from the view onto the stack.
     * @dev             Returns a bytes32 with only the `_bytes` highest bytes set.
     *                  This can be immediately cast to a smaller fixed-length byte array.
     *                  To automatically cast to an integer, use `indexUint`.
     * @param memView   The view
     * @param _index    The index
     * @param _bytes    The bytes
     * @return          result - The 32 byte result
     */
    function index(
        bytes29 memView,
        uint256 _index,
        uint8 _bytes
    ) internal pure returns (bytes32 result) {
        if (_bytes == 0) {
            return bytes32(0);
        }
        if (_index.add(_bytes) > len(memView)) {
            revert(
                indexErrOverrun(
                    loc(memView),
                    len(memView),
                    _index,
                    uint256(_bytes)
                )
            );
        }
        require(
            _bytes <= 32,
            "TypedMemView/index - Attempted to index more than 32 bytes"
        );

        uint8 bitLength = _bytes * 8;
        uint256 _loc = loc(memView);
        uint256 _mask = leftMask(bitLength);
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            result := and(mload(add(_loc, _index)), _mask)
        }
    }

    /**
     * @notice          Parse an unsigned integer from the view at `_index`.
     * @dev             Requires that the view have >= `_bytes` bytes following that index.
     * @param memView   The view
     * @param _index    The index
     * @param _bytes    The bytes
     * @return          result - The unsigned integer
     */
    function indexUint(
        bytes29 memView,
        uint256 _index,
        uint8 _bytes
    ) internal pure returns (uint256 result) {
        return uint256(index(memView, _index, _bytes)) >> ((32 - _bytes) * 8);
    }

    /**
     * @notice          Parse an unsigned integer from LE bytes.
     * @param memView   The view
     * @param _index    The index
     * @param _bytes    The bytes
     * @return          result - The unsigned integer
     */
    function indexLEUint(
        bytes29 memView,
        uint256 _index,
        uint8 _bytes
    ) internal pure returns (uint256 result) {
        return reverseUint256(uint256(index(memView, _index, _bytes)));
    }

    /**
     * @notice          Parse an address from the view at `_index`. Requires that the view have >= 20 bytes
     *                  following that index.
     * @param memView   The view
     * @param _index    The index
     * @return          address - The address
     */
    function indexAddress(bytes29 memView, uint256 _index)
        internal
        pure
        returns (address)
    {
        return address(uint160(indexUint(memView, _index, 20)));
    }

    /**
     * @notice          Return the keccak256 hash of the underlying memory
     * @param memView   The view
     * @return          digest - The keccak256 hash of the underlying memory
     */
    function keccak(bytes29 memView) internal pure returns (bytes32 digest) {
        uint256 _loc = loc(memView);
        uint256 _len = len(memView);
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            digest := keccak256(_loc, _len)
        }
    }

    /**
     * @notice          Return the sha2 digest of the underlying memory.
     * @dev             We explicitly deallocate memory afterwards.
     * @param memView   The view
     * @return          digest - The sha2 hash of the underlying memory
     */
    function sha2(bytes29 memView) internal view returns (bytes32 digest) {
        uint256 _loc = loc(memView);
        uint256 _len = len(memView);
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            let ptr := mload(0x40)
            pop(staticcall(gas(), 2, _loc, _len, ptr, 0x20)) // sha2 #1
            digest := mload(ptr)
        }
    }

    /**
     * @notice          Implements bitcoin's hash160 (rmd160(sha2()))
     * @param memView   The pre-image
     * @return          digest - the Digest
     */
    function hash160(bytes29 memView) internal view returns (bytes20 digest) {
        uint256 _loc = loc(memView);
        uint256 _len = len(memView);
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            let ptr := mload(0x40)
            pop(staticcall(gas(), 2, _loc, _len, ptr, 0x20)) // sha2
            pop(staticcall(gas(), 3, ptr, 0x20, ptr, 0x20)) // rmd160
            digest := mload(add(ptr, 0xc)) // return value is 0-prefixed.
        }
    }

    /**
     * @notice          Implements bitcoin's hash256 (double sha2)
     * @param memView   A view of the preimage
     * @return          digest - the Digest
     */
    function hash256(bytes29 memView) internal view returns (bytes32 digest) {
        uint256 _loc = loc(memView);
        uint256 _len = len(memView);
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            let ptr := mload(0x40)
            pop(staticcall(gas(), 2, _loc, _len, ptr, 0x20)) // sha2 #1
            pop(staticcall(gas(), 2, ptr, 0x20, ptr, 0x20)) // sha2 #2
            digest := mload(ptr)
        }
    }

    /**
     * @notice          Return true if the underlying memory is equal. Else false.
     * @param left      The first view
     * @param right     The second view
     * @return          bool - True if the underlying memory is equal
     */
    function untypedEqual(bytes29 left, bytes29 right)
        internal
        pure
        returns (bool)
    {
        return
            (loc(left) == loc(right) && len(left) == len(right)) ||
            keccak(left) == keccak(right);
    }

    /**
     * @notice          Return false if the underlying memory is equal. Else true.
     * @param left      The first view
     * @param right     The second view
     * @return          bool - False if the underlying memory is equal
     */
    function untypedNotEqual(bytes29 left, bytes29 right)
        internal
        pure
        returns (bool)
    {
        return !untypedEqual(left, right);
    }

    /**
     * @notice          Compares type equality.
     * @dev             Shortcuts if the pointers are identical, otherwise compares type and digest.
     * @param left      The first view
     * @param right     The second view
     * @return          bool - True if the types are the same
     */
    function equal(bytes29 left, bytes29 right) internal pure returns (bool) {
        return
            left == right ||
            (typeOf(left) == typeOf(right) && keccak(left) == keccak(right));
    }

    /**
     * @notice          Compares type inequality.
     * @dev             Shortcuts if the pointers are identical, otherwise compares type and digest.
     * @param left      The first view
     * @param right     The second view
     * @return          bool - True if the types are not the same
     */
    function notEqual(bytes29 left, bytes29 right)
        internal
        pure
        returns (bool)
    {
        return !equal(left, right);
    }

    /**
     * @notice          Copy the view to a location, return an unsafe memory reference
     * @dev             Super Dangerous direct memory access.
     *
     *                  This reference can be overwritten if anything else modifies memory (!!!).
     *                  As such it MUST be consumed IMMEDIATELY.
     *                  This function is private to prevent unsafe usage by callers.
     * @param memView   The view
     * @param _newLoc   The new location
     * @return          written - the unsafe memory reference
     */
    function unsafeCopyTo(bytes29 memView, uint256 _newLoc)
        private
        view
        returns (bytes29 written)
    {
        require(notNull(memView), "TypedMemView/copyTo - Null pointer deref");
        require(
            isValid(memView),
            "TypedMemView/copyTo - Invalid pointer deref"
        );
        uint256 _len = len(memView);
        uint256 _oldLoc = loc(memView);

        uint256 ptr;
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            ptr := mload(0x40)
            // revert if we're writing in occupied memory
            if gt(ptr, _newLoc) {
                revert(0x60, 0x20) // empty revert message
            }

            // use the identity precompile to copy
            // guaranteed not to fail, so pop the success
            pop(staticcall(gas(), 4, _oldLoc, _len, _newLoc, _len))
        }

        written = unsafeBuildUnchecked(typeOf(memView), _newLoc, _len);
    }

    /**
     * @notice          Copies the referenced memory to a new loc in memory, returning a `bytes` pointing to
     *                  the new memory
     * @dev             Shortcuts if the pointers are identical, otherwise compares type and digest.
     * @param memView   The view
     * @return          ret - The view pointing to the new memory
     */
    function clone(bytes29 memView) internal view returns (bytes memory ret) {
        uint256 ptr;
        uint256 _len = len(memView);
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            ptr := mload(0x40) // load unused memory pointer
            ret := ptr
        }
        unsafeCopyTo(memView, ptr + 0x20);
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            mstore(0x40, add(add(ptr, _len), 0x20)) // write new unused pointer
            mstore(ptr, _len) // write len of new array (in bytes)
        }
    }

    /**
     * @notice          Join the views in memory, return an unsafe reference to the memory.
     * @dev             Super Dangerous direct memory access.
     *
     *                  This reference can be overwritten if anything else modifies memory (!!!).
     *                  As such it MUST be consumed IMMEDIATELY.
     *                  This function is private to prevent unsafe usage by callers.
     * @param memViews  The views
     * @return          unsafeView - The conjoined view pointing to the new memory
     */
    function unsafeJoin(bytes29[] memory memViews, uint256 _location)
        private
        view
        returns (bytes29 unsafeView)
    {
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            let ptr := mload(0x40)
            // revert if we're writing in occupied memory
            if gt(ptr, _location) {
                revert(0x60, 0x20) // empty revert message
            }
        }

        uint256 _offset = 0;
        for (uint256 i = 0; i < memViews.length; i++) {
            bytes29 memView = memViews[i];
            unsafeCopyTo(memView, _location + _offset);
            _offset += len(memView);
        }
        unsafeView = unsafeBuildUnchecked(0, _location, _offset);
    }

    /**
     * @notice          Produce the keccak256 digest of the concatenated contents of multiple views.
     * @param memViews  The views
     * @return          bytes32 - The keccak256 digest
     */
    function joinKeccak(bytes29[] memory memViews)
        internal
        view
        returns (bytes32)
    {
        uint256 ptr;
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            ptr := mload(0x40) // load unused memory pointer
        }
        return keccak(unsafeJoin(memViews, ptr));
    }

    /**
     * @notice          Produce the sha256 digest of the concatenated contents of multiple views.
     * @param memViews  The views
     * @return          bytes32 - The sha256 digest
     */
    function joinSha2(bytes29[] memory memViews)
        internal
        view
        returns (bytes32)
    {
        uint256 ptr;
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            ptr := mload(0x40) // load unused memory pointer
        }
        return sha2(unsafeJoin(memViews, ptr));
    }

    /**
     * @notice          copies all views, joins them into a new bytearray.
     * @param memViews  The views
     * @return          ret - The new byte array
     */
    function join(bytes29[] memory memViews)
        internal
        view
        returns (bytes memory ret)
    {
        uint256 ptr;
        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            ptr := mload(0x40) // load unused memory pointer
        }

        bytes29 _newView = unsafeJoin(memViews, ptr + 0x20);
        uint256 _written = len(_newView);
        uint256 _footprint = footprint(_newView);

        assembly {
            // solium-disable-previous-line security/no-inline-assembly
            // store the legnth
            mstore(ptr, _written)
            // new pointer is old + 0x20 + the footprint of the body
            mstore(0x40, add(add(ptr, _footprint), 0x20))
            ret := ptr
        }
    }
}

/**
 * @title BurnMessage Library
 * @notice Library for formatted BurnMessages used by TokenMessenger.
 * @dev BurnMessage format:
 * Field                 Bytes      Type       Index
 * version               4          uint32     0
 * burnToken             32         bytes32    4
 * mintRecipient         32         bytes32    36
 * amount                32         uint256    68
 * messageSender         32         bytes32    100
 **/
library BurnMessage {
    using TypedMemView for bytes;
    using TypedMemView for bytes29;

    uint8 private constant VERSION_INDEX = 0;
    uint8 private constant VERSION_LEN = 4;
    uint8 private constant BURN_TOKEN_INDEX = 4;
    uint8 private constant BURN_TOKEN_LEN = 32;
    uint8 private constant MINT_RECIPIENT_INDEX = 36;
    uint8 private constant MINT_RECIPIENT_LEN = 32;
    uint8 private constant AMOUNT_INDEX = 68;
    uint8 private constant AMOUNT_LEN = 32;
    uint8 private constant MSG_SENDER_INDEX = 100;
    uint8 private constant MSG_SENDER_LEN = 32;
    // 4 byte version + 32 bytes burnToken + 32 bytes mintRecipient + 32 bytes amount + 32 bytes messageSender
    uint8 private constant BURN_MESSAGE_LEN = 132;

    /**
     * @notice Formats Burn message
     * @param _version The message body version
     * @param _burnToken The burn token address on source domain as bytes32
     * @param _mintRecipient The mint recipient address as bytes32
     * @param _amount The burn amount
     * @param _messageSender The message sender
     * @return Burn formatted message.
     */
    function _formatMessage(
        uint32 _version,
        bytes32 _burnToken,
        bytes32 _mintRecipient,
        uint256 _amount,
        bytes32 _messageSender
    ) internal pure returns (bytes memory) {
        return
            abi.encodePacked(
                _version,
                _burnToken,
                _mintRecipient,
                _amount,
                _messageSender
            );
    }

    /**
     * @notice Retrieves the burnToken from a DepositForBurn BurnMessage
     * @param _message The message
     * @return sourceToken address as bytes32
     */
    function _getMessageSender(bytes29 _message)
        internal
        pure
        returns (bytes32)
    {
        return _message.index(MSG_SENDER_INDEX, MSG_SENDER_LEN);
    }

    /**
     * @notice Retrieves the burnToken from a DepositForBurn BurnMessage
     * @param _message The message
     * @return sourceToken address as bytes32
     */
    function _getBurnToken(bytes29 _message) internal pure returns (bytes32) {
        return _message.index(BURN_TOKEN_INDEX, BURN_TOKEN_LEN);
    }

    /**
     * @notice Retrieves the mintRecipient from a BurnMessage
     * @param _message The message
     * @return mintRecipient
     */
    function _getMintRecipient(bytes29 _message)
        internal
        pure
        returns (bytes32)
    {
        return _message.index(MINT_RECIPIENT_INDEX, MINT_RECIPIENT_LEN);
    }

    /**
     * @notice Retrieves the amount from a BurnMessage
     * @param _message The message
     * @return amount
     */
    function _getAmount(bytes29 _message) internal pure returns (uint256) {
        return _message.indexUint(AMOUNT_INDEX, AMOUNT_LEN);
    }

    /**
     * @notice Retrieves the version from a Burn message
     * @param _message The message
     * @return version
     */
    function _getVersion(bytes29 _message) internal pure returns (uint32) {
        return uint32(_message.indexUint(VERSION_INDEX, VERSION_LEN));
    }

    /**
     * @notice Reverts if burn message is malformed or invalid length
     * @param _message The burn message as bytes29
     */
    function _validateBurnMessageFormat(bytes29 _message) internal pure {
        require(_message.isValid(), "Malformed message");
        require(_message.len() == BURN_MESSAGE_LEN, "Invalid message length");
    }
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title Message Library
 * @notice Library for formatted messages used by Relayer and Receiver.
 *
 * @dev The message body is dynamically-sized to support custom message body
 * formats. Other fields must be fixed-size to avoid hash collisions.
 * Each other input value has an explicit type to guarantee fixed-size.
 * Padding: uintNN fields are left-padded, and bytesNN fields are right-padded.
 *
 * Field                 Bytes      Type       Index
 * version               4          uint32     0
 * sourceDomain          4          uint32     4
 * destinationDomain     4          uint32     8
 * nonce                 8          uint64     12
 * sender                32         bytes32    20
 * recipient             32         bytes32    52
 * destinationCaller     32         bytes32    84
 * messageBody           dynamic    bytes      116
 *
 **/
library Message {
    using TypedMemView for bytes;
    using TypedMemView for bytes29;

    // Indices of each field in message
    uint8 private constant VERSION_INDEX = 0;
    uint8 private constant SOURCE_DOMAIN_INDEX = 4;
    uint8 private constant DESTINATION_DOMAIN_INDEX = 8;
    uint8 private constant NONCE_INDEX = 12;
    uint8 private constant SENDER_INDEX = 20;
    uint8 private constant RECIPIENT_INDEX = 52;
    uint8 private constant DESTINATION_CALLER_INDEX = 84;
    uint8 private constant MESSAGE_BODY_INDEX = 116;

    /**
     * @notice Returns formatted (packed) message with provided fields
     * @param _msgVersion the version of the message format
     * @param _msgSourceDomain Domain of home chain
     * @param _msgDestinationDomain Domain of destination chain
     * @param _msgNonce Destination-specific nonce
     * @param _msgSender Address of sender on source chain as bytes32
     * @param _msgRecipient Address of recipient on destination chain as bytes32
     * @param _msgDestinationCaller Address of caller on destination chain as bytes32
     * @param _msgRawBody Raw bytes of message body
     * @return Formatted message
     **/
    function _formatMessage(
        uint32 _msgVersion,
        uint32 _msgSourceDomain,
        uint32 _msgDestinationDomain,
        uint64 _msgNonce,
        bytes32 _msgSender,
        bytes32 _msgRecipient,
        bytes32 _msgDestinationCaller,
        bytes memory _msgRawBody
    ) internal pure returns (bytes memory) {
        return
            abi.encodePacked(
                _msgVersion,
                _msgSourceDomain,
                _msgDestinationDomain,
                _msgNonce,
                _msgSender,
                _msgRecipient,
                _msgDestinationCaller,
                _msgRawBody
            );
    }

    // @notice Returns _message's version field
    function _version(bytes29 _message) internal pure returns (uint32) {
        return uint32(_message.indexUint(VERSION_INDEX, 4));
    }

    // @notice Returns _message's sourceDomain field
    function _sourceDomain(bytes29 _message) internal pure returns (uint32) {
        return uint32(_message.indexUint(SOURCE_DOMAIN_INDEX, 4));
    }

    // @notice Returns _message's destinationDomain field
    function _destinationDomain(bytes29 _message)
        internal
        pure
        returns (uint32)
    {
        return uint32(_message.indexUint(DESTINATION_DOMAIN_INDEX, 4));
    }

    // @notice Returns _message's nonce field
    function _nonce(bytes29 _message) internal pure returns (uint64) {
        return uint64(_message.indexUint(NONCE_INDEX, 8));
    }

    // @notice Returns _message's sender field
    function _sender(bytes29 _message) internal pure returns (bytes32) {
        return _message.index(SENDER_INDEX, 32);
    }

    // @notice Returns _message's recipient field
    function _recipient(bytes29 _message) internal pure returns (bytes32) {
        return _message.index(RECIPIENT_INDEX, 32);
    }

    // @notice Returns _message's destinationCaller field
    function _destinationCaller(bytes29 _message)
        internal
        pure
        returns (bytes32)
    {
        return _message.index(DESTINATION_CALLER_INDEX, 32);
    }

    // @notice Returns _message's messageBody field
    function _messageBody(bytes29 _message) internal pure returns (bytes29) {
        return
            _message.slice(
                MESSAGE_BODY_INDEX,
                _message.len() - MESSAGE_BODY_INDEX,
                0
            );
    }

    /**
     * @notice converts address to bytes32 (alignment preserving cast.)
     * @param addr the address to convert to bytes32
     */
    function addressToBytes32(address addr) external pure returns (bytes32) {
        return bytes32(uint256(uint160(addr)));
    }

    /**
     * @notice converts bytes32 to address (alignment preserving cast.)
     * @dev Warning: it is possible to have different input values _buf map to the same address.
     * For use cases where this is not acceptable, validate that the first 12 bytes of _buf are zero-padding.
     * @param _buf the bytes32 to convert to address
     */
    function bytes32ToAddress(bytes32 _buf) public pure returns (address) {
        return address(uint160(uint256(_buf)));
    }

    /**
     * @notice Reverts if message is malformed or incorrect length
     * @param _message The message as bytes29
     */
    function _validateMessageFormat(bytes29 _message) internal pure {
        require(_message.isValid(), "Malformed message");
        require(
            _message.len() >= MESSAGE_BODY_INDEX,
            "Invalid message: too short"
        );
    }
}

/*
 * Copyright (c) 2022, Circle Internet Financial Limited.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/7c5f6bc2c8743d83443fa46395d75f2f3f99054a/contracts/access/Ownable.sol
 * Modifications:
 * 1. Update Solidity version from 0.8.0 to 0.7.6 (11/9/2022). (v8 was used
 * as base because it includes internal _transferOwnership method.)
 * 2. Remove renounceOwnership function
 *
 * Description
 * Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

/**
 * @dev forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/7c5f6bc2c8743d83443fa46395d75f2f3f99054a/contracts/access/Ownable2Step.sol
 * Modifications:
 * 1. Update Solidity version from 0.8.0 to 0.7.6. Version 0.8.0 was used
 * as base because this contract was added to OZ repo after version 0.8.0.
 *
 * Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2Step is Ownable {
    address private _pendingOwner;

    event OwnershipTransferStarted(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner)
        public
        virtual
        override
        onlyOwner
    {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() external {
        address sender = _msgSender();
        require(
            pendingOwner() == sender,
            "Ownable2Step: caller is not the new owner"
        );
        _transferOwnership(sender);
    }
}

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(
            value
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(
            value,
            "SafeERC20: decreased allowance below zero"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(
            data,
            "SafeERC20: low-level call failed"
        );
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}

/**
 * @notice Base contract which allows children to rescue ERC20 locked in their contract.
 * @dev Forked from https://github.com/centrehq/centre-tokens/blob/0d3cab14ebd133a83fc834dbd48d0468bdf0b391/contracts/v1.1/Rescuable.sol
 * Modifications:
 * 1. Update Solidity version from 0.6.12 to 0.7.6 (8/23/2022)
 */
contract Rescuable is Ownable2Step {
    using SafeERC20 for IERC20;

    address private _rescuer;

    event RescuerChanged(address indexed newRescuer);

    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }

    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }

    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }

    /**
     * @notice Assign the rescuer role to a given address.
     * @param newRescuer New rescuer's address
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}

/**
 * @title TokenMessenger
 * @notice Sends messages and receives messages to/from MessageTransmitters
 * and to/from TokenMinters
 */
contract TokenMessenger is IMessageHandler, Rescuable {
    // ============ Events ============
    /**
     * @notice Emitted when a DepositForBurn message is sent
     * @param nonce unique nonce reserved by message
     * @param burnToken address of token burnt on source domain
     * @param amount deposit amount
     * @param depositor address where deposit is transferred from
     * @param mintRecipient address receiving minted tokens on destination domain as bytes32
     * @param destinationDomain destination domain
     * @param destinationTokenMessenger address of TokenMessenger on destination domain as bytes32
     * @param destinationCaller authorized caller as bytes32 of receiveMessage() on destination domain, if not equal to bytes32(0).
     * If equal to bytes32(0), any address can call receiveMessage().
     */
    event DepositForBurn(
        uint64 indexed nonce,
        address indexed burnToken,
        uint256 amount,
        address indexed depositor,
        bytes32 mintRecipient,
        uint32 destinationDomain,
        bytes32 destinationTokenMessenger,
        bytes32 destinationCaller
    );

    /**
     * @notice Emitted when tokens are minted
     * @param mintRecipient recipient address of minted tokens
     * @param amount amount of minted tokens
     * @param mintToken contract address of minted token
     */
    event MintAndWithdraw(
        address indexed mintRecipient,
        uint256 amount,
        address indexed mintToken
    );

    /**
     * @notice Emitted when a remote TokenMessenger is added
     * @param domain remote domain
     * @param tokenMessenger TokenMessenger on remote domain
     */
    event RemoteTokenMessengerAdded(uint32 domain, bytes32 tokenMessenger);

    /**
     * @notice Emitted when a remote TokenMessenger is removed
     * @param domain remote domain
     * @param tokenMessenger TokenMessenger on remote domain
     */
    event RemoteTokenMessengerRemoved(uint32 domain, bytes32 tokenMessenger);

    /**
     * @notice Emitted when the local minter is added
     * @param localMinter address of local minter
     * @notice Emitted when the local minter is added
     */
    event LocalMinterAdded(address localMinter);

    /**
     * @notice Emitted when the local minter is removed
     * @param localMinter address of local minter
     * @notice Emitted when the local minter is removed
     */
    event LocalMinterRemoved(address localMinter);

    // ============ Libraries ============
    using TypedMemView for bytes;
    using TypedMemView for bytes29;
    using BurnMessage for bytes29;
    using Message for bytes29;

    // ============ State Variables ============
    // Local Message Transmitter responsible for sending and receiving messages to/from remote domains
    IMessageTransmitter public immutable localMessageTransmitter;

    // Version of message body format
    uint32 public immutable messageBodyVersion;

    // Minter responsible for minting and burning tokens on the local domain
    ITokenMinter public localMinter;

    // Valid TokenMessengers on remote domains
    mapping(uint32 => bytes32) public remoteTokenMessengers;

    // ============ Modifiers ============
    /**
     * @notice Only accept messages from a registered TokenMessenger contract on given remote domain
     * @param domain The remote domain
     * @param tokenMessenger The address of the TokenMessenger contract for the given remote domain
     */
    modifier onlyRemoteTokenMessenger(uint32 domain, bytes32 tokenMessenger) {
        require(
            _isRemoteTokenMessenger(domain, tokenMessenger),
            "Remote TokenMessenger unsupported"
        );
        _;
    }

    /**
     * @notice Only accept messages from the registered message transmitter on local domain
     */
    modifier onlyLocalMessageTransmitter() {
        // Caller must be the registered message transmitter for this domain
        require(_isLocalMessageTransmitter(), "Invalid message transmitter");
        _;
    }

    // ============ Constructor ============
    /**
     * @param _messageTransmitter Message transmitter address
     * @param _messageBodyVersion Message body version
     */
    constructor(address _messageTransmitter, uint32 _messageBodyVersion) {
        require(
            _messageTransmitter != address(0),
            "MessageTransmitter not set"
        );
        localMessageTransmitter = IMessageTransmitter(_messageTransmitter);
        messageBodyVersion = _messageBodyVersion;
    }

    // ============ External Functions  ============
    /**
     * @notice Deposits and burns tokens from sender to be minted on destination domain.
     * Emits a `DepositForBurn` event.
     * @dev reverts if:
     * - given burnToken is not supported
     * - given destinationDomain has no TokenMessenger registered
     * - transferFrom() reverts. For example, if sender's burnToken balance or approved allowance
     * to this contract is less than `amount`.
     * - burn() reverts. For example, if `amount` is 0.
     * - MessageTransmitter returns false or reverts.
     * @param amount amount of tokens to burn
     * @param destinationDomain destination domain
     * @param mintRecipient address of mint recipient on destination domain
     * @param burnToken address of contract to burn deposited tokens, on local domain
     * @return _nonce unique nonce reserved by message
     */
    function depositForBurn(
        uint256 amount,
        uint32 destinationDomain,
        bytes32 mintRecipient,
        address burnToken
    ) external returns (uint64 _nonce) {
        return
            _depositForBurn(
                amount,
                destinationDomain,
                mintRecipient,
                burnToken,
                // (bytes32(0) here indicates that any address can call receiveMessage()
                // on the destination domain, triggering mint to specified `mintRecipient`)
                bytes32(0)
            );
    }

    /**
     * @notice Deposits and burns tokens from sender to be minted on destination domain. The mint
     * on the destination domain must be called by `destinationCaller`.
     * WARNING: if the `destinationCaller` does not represent a valid address as bytes32, then it will not be possible
     * to broadcast the message on the destination domain. This is an advanced feature, and the standard
     * depositForBurn() should be preferred for use cases where a specific destination caller is not required.
     * Emits a `DepositForBurn` event.
     * @dev reverts if:
     * - given destinationCaller is zero address
     * - given burnToken is not supported
     * - given destinationDomain has no TokenMessenger registered
     * - transferFrom() reverts. For example, if sender's burnToken balance or approved allowance
     * to this contract is less than `amount`.
     * - burn() reverts. For example, if `amount` is 0.
     * - MessageTransmitter returns false or reverts.
     * @param amount amount of tokens to burn
     * @param destinationDomain destination domain
     * @param mintRecipient address of mint recipient on destination domain
     * @param burnToken address of contract to burn deposited tokens, on local domain
     * @param destinationCaller caller on the destination domain, as bytes32
     * @return nonce unique nonce reserved by message
     */
    function depositForBurnWithCaller(
        uint256 amount,
        uint32 destinationDomain,
        bytes32 mintRecipient,
        address burnToken,
        bytes32 destinationCaller
    ) external returns (uint64 nonce) {
        // Destination caller must be nonzero. To allow any destination caller, use depositForBurn().
        require(destinationCaller != bytes32(0), "Invalid destination caller");

        return
            _depositForBurn(
                amount,
                destinationDomain,
                mintRecipient,
                burnToken,
                destinationCaller
            );
    }

    /**
     * @notice Replace a BurnMessage to change the mint recipient and/or
     * destination caller. Allows the sender of a previous BurnMessage
     * (created by depositForBurn or depositForBurnWithCaller)
     * to send a new BurnMessage to replace the original.
     * The new BurnMessage will reuse the amount and burn token of the original,
     * without requiring a new deposit.
     * @dev The new message will reuse the original message's nonce. For a
     * given nonce, all replacement message(s) and the original message are
     * valid to broadcast on the destination domain, until the first message
     * at the nonce confirms, at which point all others are invalidated.
     * Note: The msg.sender of the replaced message must be the same as the
     * msg.sender of the original message.
     * @param originalMessage original message bytes (to replace)
     * @param originalAttestation original attestation bytes
     * @param newDestinationCaller the new destination caller, which may be the
     * same as the original destination caller, a new destination caller, or an empty
     * destination caller (bytes32(0), indicating that any destination caller is valid.)
     * @param newMintRecipient the new mint recipient, which may be the same as the
     * original mint recipient, or different.
     */
    function replaceDepositForBurn(
        bytes calldata originalMessage,
        bytes calldata originalAttestation,
        bytes32 newDestinationCaller,
        bytes32 newMintRecipient
    ) external {
        bytes29 _originalMsg = originalMessage.ref(0);
        _originalMsg._validateMessageFormat();
        bytes29 _originalMsgBody = _originalMsg._messageBody();
        _originalMsgBody._validateBurnMessageFormat();

        bytes32 _originalMsgSender = _originalMsgBody._getMessageSender();
        // _originalMsgSender must match msg.sender of original message
        require(
            msg.sender == Message.bytes32ToAddress(_originalMsgSender),
            "Invalid sender for message"
        );
        require(
            newMintRecipient != bytes32(0),
            "Mint recipient must be nonzero"
        );

        bytes32 _burnToken = _originalMsgBody._getBurnToken();
        uint256 _amount = _originalMsgBody._getAmount();

        bytes memory _newMessageBody = BurnMessage._formatMessage(
            messageBodyVersion,
            _burnToken,
            newMintRecipient,
            _amount,
            _originalMsgSender
        );

        localMessageTransmitter.replaceMessage(
            originalMessage,
            originalAttestation,
            _newMessageBody,
            newDestinationCaller
        );

        emit DepositForBurn(
            _originalMsg._nonce(),
            Message.bytes32ToAddress(_burnToken),
            _amount,
            msg.sender,
            newMintRecipient,
            _originalMsg._destinationDomain(),
            _originalMsg._recipient(),
            newDestinationCaller
        );
    }

    /**
     * @notice Handles an incoming message received by the local MessageTransmitter,
     * and takes the appropriate action. For a burn message, mints the
     * associated token to the requested recipient on the local domain.
     * @dev Validates the local sender is the local MessageTransmitter, and the
     * remote sender is a registered remote TokenMessenger for `remoteDomain`.
     * @param remoteDomain The domain where the message originated from.
     * @param sender The sender of the message (remote TokenMessenger).
     * @param messageBody The message body bytes.
     * @return success Bool, true if successful.
     */
    function handleReceiveMessage(
        uint32 remoteDomain,
        bytes32 sender,
        bytes calldata messageBody
    )
        external
        override
        onlyLocalMessageTransmitter
        onlyRemoteTokenMessenger(remoteDomain, sender)
        returns (bool)
    {
        bytes29 _msg = messageBody.ref(0);
        _msg._validateBurnMessageFormat();
        require(
            _msg._getVersion() == messageBodyVersion,
            "Invalid message body version"
        );

        bytes32 _mintRecipient = _msg._getMintRecipient();
        bytes32 _burnToken = _msg._getBurnToken();
        uint256 _amount = _msg._getAmount();

        ITokenMinter _localMinter = _getLocalMinter();

        _mintAndWithdraw(
            address(_localMinter),
            remoteDomain,
            _burnToken,
            Message.bytes32ToAddress(_mintRecipient),
            _amount
        );

        return true;
    }

    /**
     * @notice Add the TokenMessenger for a remote domain.
     * @dev Reverts if there is already a TokenMessenger set for domain.
     * @param domain Domain of remote TokenMessenger.
     * @param tokenMessenger Address of remote TokenMessenger as bytes32.
     */
    function addRemoteTokenMessenger(uint32 domain, bytes32 tokenMessenger)
        external
        onlyOwner
    {
        require(tokenMessenger != bytes32(0), "bytes32(0) not allowed");

        require(
            remoteTokenMessengers[domain] == bytes32(0),
            "TokenMessenger already set"
        );

        remoteTokenMessengers[domain] = tokenMessenger;
        emit RemoteTokenMessengerAdded(domain, tokenMessenger);
    }

    /**
     * @notice Remove the TokenMessenger for a remote domain.
     * @dev Reverts if there is no TokenMessenger set for `domain`.
     * @param domain Domain of remote TokenMessenger
     */
    function removeRemoteTokenMessenger(uint32 domain) external onlyOwner {
        // No TokenMessenger set for given remote domain.
        require(
            remoteTokenMessengers[domain] != bytes32(0),
            "No TokenMessenger set"
        );

        bytes32 _removedTokenMessenger = remoteTokenMessengers[domain];
        delete remoteTokenMessengers[domain];
        emit RemoteTokenMessengerRemoved(domain, _removedTokenMessenger);
    }

    /**
     * @notice Add minter for the local domain.
     * @dev Reverts if a minter is already set for the local domain.
     * @param newLocalMinter The address of the minter on the local domain.
     */
    function addLocalMinter(address newLocalMinter) external onlyOwner {
        require(newLocalMinter != address(0), "Zero address not allowed");

        require(
            address(localMinter) == address(0),
            "Local minter is already set."
        );

        localMinter = ITokenMinter(newLocalMinter);

        emit LocalMinterAdded(newLocalMinter);
    }

    /**
     * @notice Remove the minter for the local domain.
     * @dev Reverts if the minter of the local domain is not set.
     */
    function removeLocalMinter() external onlyOwner {
        address _localMinterAddress = address(localMinter);
        require(_localMinterAddress != address(0), "No local minter is set.");

        delete localMinter;
        emit LocalMinterRemoved(_localMinterAddress);
    }

    // ============ Internal Utils ============
    /**
     * @notice Deposits and burns tokens from sender to be minted on destination domain.
     * Emits a `DepositForBurn` event.
     * @param _amount amount of tokens to burn (must be non-zero)
     * @param _destinationDomain destination domain
     * @param _mintRecipient address of mint recipient on destination domain
     * @param _burnToken address of contract to burn deposited tokens, on local domain
     * @param _destinationCaller caller on the destination domain, as bytes32
     * @return nonce unique nonce reserved by message
     */
    function _depositForBurn(
        uint256 _amount,
        uint32 _destinationDomain,
        bytes32 _mintRecipient,
        address _burnToken,
        bytes32 _destinationCaller
    ) internal returns (uint64 nonce) {
        require(_amount > 0, "Amount must be nonzero");
        require(_mintRecipient != bytes32(0), "Mint recipient must be nonzero");

        bytes32 _destinationTokenMessenger = _getRemoteTokenMessenger(
            _destinationDomain
        );

        ITokenMinter _localMinter = _getLocalMinter();
        IMintBurnToken _mintBurnToken = IMintBurnToken(_burnToken);
        require(
            _mintBurnToken.transferFrom(
                msg.sender,
                address(_localMinter),
                _amount
            ),
            "Transfer operation failed"
        );
        _localMinter.burn(_burnToken, _amount);

        // Format message body
        bytes memory _burnMessage = BurnMessage._formatMessage(
            messageBodyVersion,
            Message.addressToBytes32(_burnToken),
            _mintRecipient,
            _amount,
            Message.addressToBytes32(msg.sender)
        );

        uint64 _nonceReserved = _sendDepositForBurnMessage(
            _destinationDomain,
            _destinationTokenMessenger,
            _destinationCaller,
            _burnMessage
        );

        emit DepositForBurn(
            _nonceReserved,
            _burnToken,
            _amount,
            msg.sender,
            _mintRecipient,
            _destinationDomain,
            _destinationTokenMessenger,
            _destinationCaller
        );

        return _nonceReserved;
    }

    /**
     * @notice Sends a BurnMessage through the local message transmitter
     * @dev calls local message transmitter's sendMessage() function if `_destinationCaller` == bytes32(0),
     * or else calls sendMessageWithCaller().
     * @param _destinationDomain destination domain
     * @param _destinationTokenMessenger address of registered TokenMessenger contract on destination domain, as bytes32
     * @param _destinationCaller caller on the destination domain, as bytes32. If `_destinationCaller` == bytes32(0),
     * any address can call receiveMessage() on destination domain.
     * @param _burnMessage formatted BurnMessage bytes (message body)
     * @return nonce unique nonce reserved by message
     */
    function _sendDepositForBurnMessage(
        uint32 _destinationDomain,
        bytes32 _destinationTokenMessenger,
        bytes32 _destinationCaller,
        bytes memory _burnMessage
    ) internal returns (uint64 nonce) {
        if (_destinationCaller == bytes32(0)) {
            return
                localMessageTransmitter.sendMessage(
                    _destinationDomain,
                    _destinationTokenMessenger,
                    _burnMessage
                );
        } else {
            return
                localMessageTransmitter.sendMessageWithCaller(
                    _destinationDomain,
                    _destinationTokenMessenger,
                    _destinationCaller,
                    _burnMessage
                );
        }
    }

    /**
     * @notice Mints tokens to a recipient
     * @param _tokenMinter address of TokenMinter contract
     * @param _remoteDomain domain where burned tokens originate from
     * @param _burnToken address of token burned
     * @param _mintRecipient recipient address of minted tokens
     * @param _amount amount of minted tokens
     */
    function _mintAndWithdraw(
        address _tokenMinter,
        uint32 _remoteDomain,
        bytes32 _burnToken,
        address _mintRecipient,
        uint256 _amount
    ) internal {
        ITokenMinter _minter = ITokenMinter(_tokenMinter);
        address _mintToken = _minter.mint(
            _remoteDomain,
            _burnToken,
            _mintRecipient,
            _amount
        );

        emit MintAndWithdraw(_mintRecipient, _amount, _mintToken);
    }

    /**
     * @notice return the remote TokenMessenger for the given `_domain` if one exists, else revert.
     * @param _domain The domain for which to get the remote TokenMessenger
     * @return _tokenMessenger The address of the TokenMessenger on `_domain` as bytes32
     */
    function _getRemoteTokenMessenger(uint32 _domain)
        internal
        view
        returns (bytes32)
    {
        bytes32 _tokenMessenger = remoteTokenMessengers[_domain];
        require(_tokenMessenger != bytes32(0), "No TokenMessenger for domain");
        return _tokenMessenger;
    }

    /**
     * @notice return the local minter address if it is set, else revert.
     * @return local minter as ITokenMinter.
     */
    function _getLocalMinter() internal view returns (ITokenMinter) {
        require(address(localMinter) != address(0), "Local minter is not set");
        return localMinter;
    }

    /**
     * @notice Return true if the given remote domain and TokenMessenger is registered
     * on this TokenMessenger.
     * @param _domain The remote domain of the message.
     * @param _tokenMessenger The address of the TokenMessenger on remote domain.
     * @return true if a remote TokenMessenger is registered for `_domain` and `_tokenMessenger`,
     * on this TokenMessenger.
     */
    function _isRemoteTokenMessenger(uint32 _domain, bytes32 _tokenMessenger)
        internal
        view
        returns (bool)
    {
        return
            _tokenMessenger != bytes32(0) &&
            remoteTokenMessengers[_domain] == _tokenMessenger;
    }

    /**
     * @notice Returns true if the message sender is the local registered MessageTransmitter
     * @return true if message sender is the registered local message transmitter
     */
    function _isLocalMessageTransmitter() internal view returns (bool) {
        return
            address(localMessageTransmitter) != address(0) &&
            msg.sender == address(localMessageTransmitter);
    }
}

{
  "compilationTarget": {
    "TokenMessenger.sol": "TokenMessenger"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 100000
  },
  "remappings": []
}