// SPDX-License-Identifier: MIT                                                                               
             
pragma solidity 0.8.16;

abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

interface IPlaygroundToken {
    // function addPair(address pair, address token) external;

    function claimFees(uint256 amount, address token) external;
}

library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

interface IPlaygroundPair {
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    event Transfer(address indexed from, address indexed to, uint256 value);

    function name() external pure returns (string memory);

    function symbol() external pure returns (string memory);

    function decimals() external pure returns (uint8);

    function totalSupply() external view returns (uint256);

    function balanceOf(address owner) external view returns (uint256);

    function allowance(address owner, address spender)
        external
        view
        returns (uint256);

    function approve(address spender, uint256 value) external returns (bool);

    function transfer(address to, uint256 value) external returns (bool);

    function transferFrom(
        address from,
        address to,
        uint256 value
    ) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);

    function PERMIT_TYPEHASH() external pure returns (bytes32);

    function nonces(address owner) external view returns (uint256);

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    event Mint(address indexed sender, uint256 amount0, uint256 amount1);
    event Burn(
        address indexed sender,
        uint256 amount0,
        uint256 amount1,
        address indexed to
    );
    event Swap(
        address indexed sender,
        uint256 amount0In,
        uint256 amount1In,
        uint256 amount0Out,
        uint256 amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint256);

    function factory() external view returns (address);

    function token0() external view returns (address);

    function token1() external view returns (address);

    function feeToken() external view returns (address);

    function totalFee() external view returns (uint256);

    function getReserves()
        external
        view
        returns (
            uint112 reserve0,
            uint112 reserve1,
            uint32 blockTimestampLast
        );

    function setFeeToken(address _feeToken) external;

    function setTotalFee(uint256 _totalFee) external returns (bool);

    function price0CumulativeLast() external view returns (uint256);

    function price1CumulativeLast() external view returns (uint256);

    function kLast() external view returns (uint256);

    function mint(address to) external returns (uint256 liquidity);

    function burn(address to)
        external
        returns (uint256 amount0, uint256 amount1);

    function swap(
        uint256 amount0Out,
        uint256 amount1Out,
        uint256 amount0Fee,
        uint256 amount1Fee,
        address to,
        bytes calldata data
    ) external;

    function skim(address to) external;

    function sync() external;

    function initialize(
        address,
        address,
        address
    ) external;
}

interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    function name() public view virtual override returns (string memory) {
        return _name;
    }

    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);
    }

    function _createInitialSupply(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);
    }

    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
}

contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    function owner() public view returns (address) {
        return _owner;
    }

    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    function renounceOwnership() external virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

interface IPlaygroundRouter {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    function swapExactTokensForETHSupportingFeeOnTransferTokens(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline) external;
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(uint amountOutMin, address[] calldata path, address to, uint deadline) external payable;
    function addLiquidityETH(address token, uint256 amountTokenDesired, uint256 amountTokenMin, uint256 amountETHMin, address to, uint256 deadline) external payable returns (uint256 amountToken, uint256 amountETH, uint256 liquidity);
    function addLiquidity(
        address tokenA,
        address tokenB,
        uint256 amountADesired,
        uint256 amountBDesired,
        uint256 amountAMin,
        uint256 amountBMin,
        address to,
        uint256 deadline
    )
        external
        returns (
            uint256 amountA,
            uint256 amountB,
            uint256 liquidity
        );
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function removeLiquidityETH(address token, uint liquidity, uint amountTokenMin, uint amountETHMin, address to, uint deadline) external returns (uint amountToken, uint amountETH);
}

interface IPlaygroundFactory {
    function createPair(address tokenA, address tokenB, address router) external returns (address pair);
}

contract TokenHandler is Ownable {
    function sendTokenToOwner(address token) external onlyOwner {
        if(IERC20(token).balanceOf(address(this)) > 0){
            IERC20(token).transfer(owner(), IERC20(token).balanceOf(address(this)));
        }
    }
}

contract BURNREDBURN is ERC20, Ownable, IPlaygroundToken {

    IPlaygroundRouter public dexRouter;
    IPlaygroundPair public lpPair;
    IPlaygroundPair public usdcLpPair;
    address usdcAddress;

    uint256 public maxTxnAmount;
    uint256 public maxWallet;

    address public communityAddress;

    TokenHandler public tokenHandler;

    address public RED;

    uint256 public tradingActiveBlock = 0; // 0 means trading is not active

    bool public limitsInEffect = true;
    bool public tradingActive = false;
    bool public swapEnabled = false;

    uint256 public totalFees;
    uint256 public communityFee;
    uint256 public liquidityFee;

    uint256 public constant FEE_DIVISOR = 1000;

    uint256 public lpWithdrawRequestTimestamp;
    uint256 public lpWithdrawRequestDuration = 1 minutes;
    bool public lpWithdrawRequestPending;
    uint256 public lpPercToWithDraw;

    uint256 public percentForLPBurn = 25; // 25 = .25%
    bool public lpBurnEnabled = false;
    uint256 public lpBurnFrequency = 360000 seconds;
    uint256 public lastLpBurnTime;
    
    uint256 public manualBurnFrequency = 1 seconds;
    uint256 public lastManualLpBurnTime;
    
    /******************/

    mapping (address => bool) private _isWhitelisted;

    // store addresses that a automatic market maker pairs. Any transfer *to* these addresses
    // could be subject to a maximum transfer amount
    mapping (address => bool) public automatedMarketMakerPairs;

    event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);

    event EnabledTrading();

    event ExcludeFromFees(address indexed account, bool isExcluded);

    event UpdatedCommunityAddress(address indexed newWallet);

    event OwnerForcedSwapBack(uint256 timestamp);

    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiquidity
    );

    event AutoBurnLP(uint256 indexed tokensBurned);

    event ManualBurnLP(uint256 indexed tokensBurned);

    event TransferForeignToken(address token, uint256 amount);

    event RequestedLPWithdraw();
    
    event WithdrewLPForMigration();

    event CanceledLpWithdrawRequest();

    event UpdatedMaxTxnAmount(uint256 newAmount);

    event RemovedLimits();

    constructor() ERC20("RED", "RED") payable {
        
        address newOwner = msg.sender; // can leave alone if owner is deployer.
        address _dexRouter;

        if(block.chainid == 1){
            _dexRouter = 0xd0c2ce21b55fc153e1298455276418D8F2fA6431; // Plaground Router
            usdcAddress = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48; // USDC 
            
        } else if(block.chainid == 5){
            _dexRouter = 0x57BdACb706c392c675Fb103924f1b3C325FaDd12; // Goerli Router
            usdcAddress = 0x2f3A40A3db8a7e3D09B0adfEfbCe4f6F81927557;
        } else if(block.chainid == 42161){
            _dexRouter = 0x30F7f0C9A9f3BE5D0E06FA187bd25693BDdb4CD6; // Arbitrum Router
            usdcAddress = 0xFF970A61A04b1cA14834A43f5dE4533eBDDB5CC8;
        }else {
            revert("Chain not configured");
        }

        tokenHandler = new TokenHandler();
        RED = owner();

        // initialize router
        dexRouter = IPlaygroundRouter(_dexRouter);
        // create pair
        lpPair = IPlaygroundPair(IPlaygroundFactory(dexRouter.factory()).createPair(address(this), dexRouter.WETH(), address(dexRouter)));
        usdcLpPair = IPlaygroundPair(IPlaygroundFactory(dexRouter.factory()).createPair(address(this), usdcAddress, address(dexRouter)));

        usdcLpPair.setFeeToken(usdcAddress);
        lpPair.setFeeToken(dexRouter.WETH());

        _setAutomatedMarketMakerPair(address(lpPair), true);
        _setAutomatedMarketMakerPair(address(usdcLpPair), true);
        
        uint256 totalSupply = 1 * 1e9 * (10 ** decimals());

        maxTxnAmount = totalSupply * 5 / 1000;
        maxWallet = totalSupply * 1 / 100; // 1%
        
        communityFee = 50;
        liquidityFee = 50;
        totalFees = communityFee + liquidityFee;

        communityAddress = address(msg.sender);

        whitelist(newOwner, true);
        whitelist(address(this), true);
        whitelist(address(0xdead), true);
        whitelist(address(communityAddress), true);
        whitelist(address(dexRouter), true);

        _createInitialSupply(newOwner, totalSupply);
        transferOwnership(newOwner);
    }

    receive() external payable {}
    
    function enableTrading() external onlyOwner {
        require(!tradingActive, "Cannot reenable trading");
        usdcLpPair.setTotalFee(totalFees);
        lpPair.setTotalFee(totalFees);
        tradingActive = true;
        tradingActiveBlock = block.number;
        emit EnabledTrading();
    }
    
    function airdropToWallets(address[] memory wallets, uint256[] memory amountsInTokens) external onlyOwner {
        require(wallets.length == amountsInTokens.length, "arrays must be the same length");
        require(wallets.length < 600, "Can only airdrop 600 wallets per txn due to gas limits"); // allows for airdrop + launch at the same exact time, reducing delays and reducing sniper input.
        for(uint256 i = 0; i < wallets.length; i++){
            address wallet = wallets[i];
            uint256 amount = amountsInTokens[i];
            super._transfer(msg.sender, wallet, amount);
        }
    }

    function setAutomatedMarketMakerPair(address pair, bool value) external onlyOwner {
        require(pair != address(lpPair), "The pair cannot be removed from automatedMarketMakerPairs");
        _setAutomatedMarketMakerPair(pair, value);
        emit SetAutomatedMarketMakerPair(pair, value);
    }

    function _setAutomatedMarketMakerPair(address pair, bool value) private {
        automatedMarketMakerPairs[pair] = value;
        emit SetAutomatedMarketMakerPair(pair, value);
    }

    function updateFees(uint256 _communityFee, uint256 _liquidityFee) external onlyRED {
        communityFee = _communityFee;
        liquidityFee = _liquidityFee;
        totalFees = communityFee + liquidityFee;
        lpPair.setTotalFee(totalFees);
        usdcLpPair.setTotalFee(totalFees);
        require(totalFees <= 15 * FEE_DIVISOR / 100, "Must keep fees at 15% or less");
    }

    function massExcludeFromFees(address[] calldata accounts, bool excluded) external onlyOwner {
        for(uint256 i = 0; i < accounts.length; i++){
            _isWhitelisted[accounts[i]] = excluded;
            emit ExcludeFromFees(accounts[i], excluded);
        }
    }

    function whitelist(address account, bool excluded) public onlyOwner {
        _isWhitelisted[account] = excluded;
        emit ExcludeFromFees(account, excluded);
    }

    function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
        require(newNum >= (totalSupply() * 2 / 1000)/1e18, "Cannot set max buy amount lower than 0.2%");
        maxTxnAmount = newNum * (10**18);
        emit UpdatedMaxTxnAmount(maxTxnAmount);
    }

    function updateMaxWallet(uint256 newNum) external onlyOwner {
        require(newNum >= (totalSupply() * 1 / 100)/1e18, "Cannot set max wallet amount lower than 1%");
        maxWallet = newNum * (10**18);
    }

    // remove limits after token is stable
    function removeLimits() external onlyOwner {
        limitsInEffect = false;
        emit RemovedLimits();
    }

    function _transfer(address from, address to, uint256 amount) internal override {

        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "amount must be greater than 0");
        
        if(!tradingActive){
            require(_isWhitelisted[from] || _isWhitelisted[to], "Trading is not active.");
        }

        if(limitsInEffect){
            if (!_isWhitelisted[from] && !_isWhitelisted[to]){
                //when buy
                if (automatedMarketMakerPairs[from]) {
                    require(amount <= maxTxnAmount, "Buy transfer amount exceeds the max buy.");
                    require(amount + balanceOf(to) <= maxWallet, "Max Wallet exceeded");
                } 
                //when sell
                else if (automatedMarketMakerPairs[to]) {
                    require(amount <= maxTxnAmount, "Sell transfer amount exceeds the max sell.");
                }
            }
        }

        if(automatedMarketMakerPairs[to] && lpBurnEnabled && block.timestamp >= lastLpBurnTime + lpBurnFrequency && !_isWhitelisted[from]){
            autoBurnLiquidityPairTokens();
        }

        super._transfer(from, to, amount);
    }

    function claimFees(uint256 amount, address token) external {
        if(amount == 0) return;
        SafeERC20.safeTransferFrom(IERC20(token), msg.sender, address(this), amount);
        uint256 amountForCommunity = amount * communityFee / totalFees;
        if(amountForCommunity > 0){
            SafeERC20.safeTransfer(IERC20(token), communityAddress, amountForCommunity);
        }
    }

    function transferForeignToken(address _token, address _to) external onlyRED {
        require(_token != address(0), "_token address cannot be 0");
        require(_token != address(lpPair) || !tradingActive, "Can't withdraw LP while trading is active");
        uint256 _contractBalance = IERC20(_token).balanceOf(address(this));
        SafeERC20.safeTransfer(IERC20(_token), _to , _contractBalance);
        emit TransferForeignToken(_token, _contractBalance);
    }

    // withdraw ETH if stuck or someone sends to the address
    function withdrawStuckETH() external onlyRED {
        bool success;
        (success,) = address(msg.sender).call{value: address(this).balance}("");
    }

    function setCommunityAddress(address _communityAddress) external onlyRED {
        require(_communityAddress != address(0), "_communityAddress address cannot be 0");
        communityAddress = payable(_communityAddress);
        emit UpdatedCommunityAddress(_communityAddress);
    }

    function setAutoLPBurnSettings(uint256 _frequencyInSeconds, uint256 _percent, bool _Enabled) external onlyRED {
        require(_frequencyInSeconds >= 600, "cannot set buyback more often than every 10 minutes");
        require(_percent <= 1000 && _percent >= 0, "Must set auto LP burn percent between 0% and 10%");
        lpBurnFrequency = _frequencyInSeconds;
        percentForLPBurn = _percent;
        lpBurnEnabled = _Enabled;
    }
    
    function autoBurnLiquidityPairTokens() internal {
        
        lastLpBurnTime = block.timestamp;
        
        lastManualLpBurnTime = block.timestamp;
        uint256 lpBalance = IERC20(address(lpPair)).balanceOf(address(this));
        uint256 tokenBalance = balanceOf(address(this));
        uint256 lpAmount = lpBalance * percentForLPBurn / 10000;
        uint256 initialEthBalance = address(this).balance;

        // approve token transfer to cover all possible scenarios
        IERC20(address(lpPair)).approve(address(dexRouter), lpAmount);

        // remove the liquidity
        dexRouter.removeLiquidityETH(
            address(this),
            lpAmount,
            1, // slippage is unavoidable
            1, // slippage is unavoidable
            address(this),
            block.timestamp
        );

        uint256 deltaTokenBalance = balanceOf(address(this)) - tokenBalance;
        if(deltaTokenBalance > 0){
            super._transfer(address(this), address(0xdead), deltaTokenBalance);
        }

        uint256 deltaEthBalance = address(this).balance - initialEthBalance;

        if(deltaEthBalance > 0){
            buyBackTokens(deltaEthBalance);
        }

        emit AutoBurnLP(lpAmount);
    }

    function manualBurnLiquidityPairTokens(uint256 percent) external onlyRED {
        require(percent <=2000, "May not burn more than 20% of contract's LP at a time");
        require(lastManualLpBurnTime <= block.timestamp - manualBurnFrequency, "Burn too soon");
        lastManualLpBurnTime = block.timestamp;
        uint256 lpBalance = IERC20(address(lpPair)).balanceOf(address(this));
        uint256 tokenBalance = balanceOf(address(this));
        uint256 lpAmount = lpBalance * percent / 10000;
        uint256 initialEthBalance = address(this).balance;

        // approve token transfer to cover all possible scenarios
        IERC20(address(lpPair)).approve(address(dexRouter), lpAmount);

        // remove the liquidity
        dexRouter.removeLiquidityETH(
            address(this),
            lpAmount,
            1, // slippage is unavoidable
            1, // slippage is unavoidable
            address(this),
            block.timestamp
        );

        uint256 deltaTokenBalance = balanceOf(address(this)) - tokenBalance;
        if(deltaTokenBalance > 0){
            super._transfer(address(this), address(0xdead), deltaTokenBalance);
        }

        uint256 deltaEthBalance = address(this).balance - initialEthBalance;

        if(deltaEthBalance > 0){
            buyBackTokens(deltaEthBalance);
        }

        emit ManualBurnLP(lpAmount);
    }

    function buyBackTokens(uint256 amountInWei) internal {
        address[] memory path = new address[](2);
        path[0] = dexRouter.WETH();
        path[1] = address(this);

        dexRouter.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amountInWei}(
            0,
            path,
            address(0xdead),
            block.timestamp
        );
    }

    function requestToWithdrawLP(uint256 percToWithdraw) external onlyOwner {
        require(!lpWithdrawRequestPending, "Cannot request again until first request is over.");
        require(percToWithdraw <= 100 && percToWithdraw > 0, "Need to set between 1-100%");
        lpWithdrawRequestTimestamp = block.timestamp;
        lpWithdrawRequestPending = true;
        lpPercToWithDraw = percToWithdraw;
        emit RequestedLPWithdraw();
    }

    function nextAvailableLpWithdrawDate() public view returns (uint256){
        if(lpWithdrawRequestPending){
            return lpWithdrawRequestTimestamp + lpWithdrawRequestDuration;
        }
        else {
            return 0;  // 0 means no open requests
        }
    }

    function withdrawRequestedLP() external onlyOwner {
        require(block.timestamp >= nextAvailableLpWithdrawDate() && nextAvailableLpWithdrawDate() > 0, "Must request and wait.");
        lpWithdrawRequestTimestamp = 0;
        lpWithdrawRequestPending = false;

        uint256 amtToWithdraw = IERC20(address(lpPair)).balanceOf(address(this)) * lpPercToWithDraw / 100;
        
        lpPercToWithDraw = 0;

        IERC20(address(lpPair)).transfer(msg.sender, amtToWithdraw);
    }

    function cancelLPWithdrawRequest() external onlyOwner {
        lpWithdrawRequestPending = false;
        lpPercToWithDraw = 0;
        lpWithdrawRequestTimestamp = 0;
        emit CanceledLpWithdrawRequest();
    }

    function addInitialLiquidity(uint256 blocksForPenalty) external onlyOwner {
        require(!tradingActive, "Trading is already active, cannot relaunch.");
        require(blocksForPenalty < 10, "Cannot make penalty blocks more than 10");
   
        // add the liquidity

        require(address(this).balance > 0, "Must have ETH on contract to launch");

        require(balanceOf(address(this)) > 0, "Must have Tokens on contract to launch");

        _approve(address(this), address(dexRouter), balanceOf(address(this)));
        dexRouter.addLiquidityETH{value: address(this).balance}(
            address(this),
            balanceOf(address(this)),
            1, // slippage is unavoidable
            1, // slippage is unavoidable
            address(this),
            block.timestamp
        );
    }

    function addLiquidity() external onlyRED {
        require(tradingActive, "Trading is not active.");
        uint256 wethBalance = IERC20(dexRouter.WETH()).balanceOf(address(this));
        require(wethBalance > 0, "No WETH");
        IERC20(dexRouter.WETH()).transfer(address(lpPair), wethBalance);
        lpPair.sync();
    }

    function addLiquidityUSDC() external onlyRED {
        require(tradingActive, "Trading is not active.");
        uint256 usdcBalance = IERC20(usdcAddress).balanceOf(address(this));
        require(usdcBalance > 0, "No USDC");
        IERC20(usdcAddress).transfer(address(usdcLpPair), usdcBalance);
        usdcLpPair.sync();
    }

    modifier onlyRED(){
        require(msg.sender == RED, "Not RED");
        _;
    }

    function renounceREDOwnership() external onlyRED {
        RED = address(0);
    }
}

{
  "compilationTarget": {
    "BURNREDBURN.sol": "BURNREDBURN"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}