// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IPendleBaseToken is IERC20 {
    /**
     * @notice Decreases the allowance granted to spender by the caller.
     * @param spender The address to reduce the allowance from.
     * @param subtractedValue The amount allowance to subtract.
     * @return Returns true if allowance has decreased, otherwise false.
     **/
    function decreaseAllowance(address spender, uint256 subtractedValue) external returns (bool);

    /**
     * @notice The yield contract start in epoch time.
     * @return Returns the yield start date.
     **/
    function start() external view returns (uint256);

    /**
     * @notice The yield contract expiry in epoch time.
     * @return Returns the yield expiry date.
     **/
    function expiry() external view returns (uint256);

    /**
     * @notice Increases the allowance granted to spender by the caller.
     * @param spender The address to increase the allowance from.
     * @param addedValue The amount allowance to add.
     * @return Returns true if allowance has increased, otherwise false
     **/
    function increaseAllowance(address spender, uint256 addedValue) external returns (bool);

    /**
     * @notice Returns the number of decimals the token uses.
     * @return Returns the token's decimals.
     **/
    function decimals() external view returns (uint8);

    /**
     * @notice Returns the name of the token.
     * @return Returns the token's name.
     **/
    function name() external view returns (string memory);

    /**
     * @notice Returns the symbol of the token.
     * @return Returns the token's symbol.
     **/
    function symbol() external view returns (string memory);

    /**
     * @notice approve using the owner's signature
     **/
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;

import "./IPendleForge.sol";

interface IPendleCompoundForge is IPendleForge {
    /**
    @dev directly get the exchangeRate from Compound
    */
    function getExchangeRate(address _underlyingAsset) external returns (uint256);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;

import "./IPendleRouter.sol";
import "./IPendleYieldToken.sol";
import "./IPendlePausingManager.sol";
import "./IPendleMarket.sol";

interface IPendleData {
    /**
     * @notice Emitted when validity of a forge-factory pair is updated
     * @param _forgeId the forge id
     * @param _marketFactoryId the market factory id
     * @param _valid valid or not
     **/
    event ForgeFactoryValiditySet(bytes32 _forgeId, bytes32 _marketFactoryId, bool _valid);

    /**
     * @notice Emitted when Pendle and PendleFactory addresses have been updated.
     * @param treasury The address of the new treasury contract.
     **/
    event TreasurySet(address treasury);

    /**
     * @notice Emitted when LockParams is changed
     **/
    event LockParamsSet(uint256 lockNumerator, uint256 lockDenominator);

    /**
     * @notice Emitted when ExpiryDivisor is changed
     **/
    event ExpiryDivisorSet(uint256 expiryDivisor);

    /**
     * @notice Emitted when forge fee is changed
     **/
    event ForgeFeeSet(uint256 forgeFee);

    /**
     * @notice Emitted when interestUpdateRateDeltaForMarket is changed
     * @param interestUpdateRateDeltaForMarket new interestUpdateRateDeltaForMarket setting
     **/
    event InterestUpdateRateDeltaForMarketSet(uint256 interestUpdateRateDeltaForMarket);

    /**
     * @notice Emitted when market fees are changed
     * @param _swapFee new swapFee setting
     * @param _protocolSwapFee new protocolSwapFee setting
     **/
    event MarketFeesSet(uint256 _swapFee, uint256 _protocolSwapFee);

    /**
     * @notice Emitted when the curve shift block delta is changed
     * @param _blockDelta new block delta setting
     **/
    event CurveShiftBlockDeltaSet(uint256 _blockDelta);

    /**
     * @dev Emitted when new forge is added
     * @param marketFactoryId Human Readable Market Factory ID in Bytes
     * @param marketFactoryAddress The Market Factory Address
     */
    event NewMarketFactory(bytes32 indexed marketFactoryId, address indexed marketFactoryAddress);

    /**
     * @notice Set/update validity of a forge-factory pair
     * @param _forgeId the forge id
     * @param _marketFactoryId the market factory id
     * @param _valid valid or not
     **/
    function setForgeFactoryValidity(
        bytes32 _forgeId,
        bytes32 _marketFactoryId,
        bool _valid
    ) external;

    /**
     * @notice Sets the PendleTreasury contract addresses.
     * @param newTreasury Address of new treasury contract.
     **/
    function setTreasury(address newTreasury) external;

    /**
     * @notice Gets a reference to the PendleRouter contract.
     * @return Returns the router contract reference.
     **/
    function router() external view returns (IPendleRouter);

    /**
     * @notice Gets a reference to the PendleRouter contract.
     * @return Returns the router contract reference.
     **/
    function pausingManager() external view returns (IPendlePausingManager);

    /**
     * @notice Gets the treasury contract address where fees are being sent to.
     * @return Address of the treasury contract.
     **/
    function treasury() external view returns (address);

    /***********
     *  FORGE  *
     ***********/

    /**
     * @notice Emitted when a forge for a protocol is added.
     * @param forgeId Forge and protocol identifier.
     * @param forgeAddress The address of the added forge.
     **/
    event ForgeAdded(bytes32 indexed forgeId, address indexed forgeAddress);

    /**
     * @notice Adds a new forge for a protocol.
     * @param forgeId Forge and protocol identifier.
     * @param forgeAddress The address of the added forge.
     **/
    function addForge(bytes32 forgeId, address forgeAddress) external;

    /**
     * @notice Store new OT and XYT details.
     * @param forgeId Forge and protocol identifier.
     * @param ot The address of the new XYT.
     * @param xyt The address of the new XYT.
     * @param underlyingAsset Token address of the underlying asset.
     * @param expiry Yield contract expiry in epoch time.
     **/
    function storeTokens(
        bytes32 forgeId,
        address ot,
        address xyt,
        address underlyingAsset,
        uint256 expiry
    ) external;

    /**
     * @notice Set a new forge fee
     * @param _forgeFee new forge fee
     **/
    function setForgeFee(uint256 _forgeFee) external;

    /**
     * @notice Gets the OT and XYT tokens.
     * @param forgeId Forge and protocol identifier.
     * @param underlyingYieldToken Token address of the underlying yield token.
     * @param expiry Yield contract expiry in epoch time.
     * @return ot The OT token references.
     * @return xyt The XYT token references.
     **/
    function getPendleYieldTokens(
        bytes32 forgeId,
        address underlyingYieldToken,
        uint256 expiry
    ) external view returns (IPendleYieldToken ot, IPendleYieldToken xyt);

    /**
     * @notice Gets a forge given the identifier.
     * @param forgeId Forge and protocol identifier.
     * @return forgeAddress Returns the forge address.
     **/
    function getForgeAddress(bytes32 forgeId) external view returns (address forgeAddress);

    /**
     * @notice Checks if an XYT token is valid.
     * @param forgeId The forgeId of the forge.
     * @param underlyingAsset Token address of the underlying asset.
     * @param expiry Yield contract expiry in epoch time.
     * @return True if valid, false otherwise.
     **/
    function isValidXYT(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry
    ) external view returns (bool);

    /**
     * @notice Checks if an OT token is valid.
     * @param forgeId The forgeId of the forge.
     * @param underlyingAsset Token address of the underlying asset.
     * @param expiry Yield contract expiry in epoch time.
     * @return True if valid, false otherwise.
     **/
    function isValidOT(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry
    ) external view returns (bool);

    function validForgeFactoryPair(bytes32 _forgeId, bytes32 _marketFactoryId)
        external
        view
        returns (bool);

    /**
     * @notice Gets a reference to a specific OT.
     * @param forgeId Forge and protocol identifier.
     * @param underlyingYieldToken Token address of the underlying yield token.
     * @param expiry Yield contract expiry in epoch time.
     * @return ot Returns the reference to an OT.
     **/
    function otTokens(
        bytes32 forgeId,
        address underlyingYieldToken,
        uint256 expiry
    ) external view returns (IPendleYieldToken ot);

    /**
     * @notice Gets a reference to a specific XYT.
     * @param forgeId Forge and protocol identifier.
     * @param underlyingAsset Token address of the underlying asset
     * @param expiry Yield contract expiry in epoch time.
     * @return xyt Returns the reference to an XYT.
     **/
    function xytTokens(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry
    ) external view returns (IPendleYieldToken xyt);

    /***********
     *  MARKET *
     ***********/

    event MarketPairAdded(address indexed market, address indexed xyt, address indexed token);

    function addMarketFactory(bytes32 marketFactoryId, address marketFactoryAddress) external;

    function isMarket(address _addr) external view returns (bool result);

    function isXyt(address _addr) external view returns (bool result);

    function addMarket(
        bytes32 marketFactoryId,
        address xyt,
        address token,
        address market
    ) external;

    function setMarketFees(uint256 _swapFee, uint256 _protocolSwapFee) external;

    function setInterestUpdateRateDeltaForMarket(uint256 _interestUpdateRateDeltaForMarket)
        external;

    function setLockParams(uint256 _lockNumerator, uint256 _lockDenominator) external;

    function setExpiryDivisor(uint256 _expiryDivisor) external;

    function setCurveShiftBlockDelta(uint256 _blockDelta) external;

    /**
     * @notice Displays the number of markets currently existing.
     * @return Returns markets length,
     **/
    function allMarketsLength() external view returns (uint256);

    function forgeFee() external view returns (uint256);

    function interestUpdateRateDeltaForMarket() external view returns (uint256);

    function expiryDivisor() external view returns (uint256);

    function lockNumerator() external view returns (uint256);

    function lockDenominator() external view returns (uint256);

    function swapFee() external view returns (uint256);

    function protocolSwapFee() external view returns (uint256);

    function curveShiftBlockDelta() external view returns (uint256);

    function getMarketByIndex(uint256 index) external view returns (address market);

    /**
     * @notice Gets a market given a future yield token and an ERC20 token.
     * @param xyt Token address of the future yield token as base asset.
     * @param token Token address of an ERC20 token as quote asset.
     * @return market Returns the market address.
     **/
    function getMarket(
        bytes32 marketFactoryId,
        address xyt,
        address token
    ) external view returns (address market);

    /**
     * @notice Gets a market factory given the identifier.
     * @param marketFactoryId MarketFactory identifier.
     * @return marketFactoryAddress Returns the factory address.
     **/
    function getMarketFactoryAddress(bytes32 marketFactoryId)
        external
        view
        returns (address marketFactoryAddress);

    function getMarketFromKey(
        address xyt,
        address token,
        bytes32 marketFactoryId
    ) external view returns (address market);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;

import "./IPendleRouter.sol";
import "./IPendleRewardManager.sol";
import "./IPendleYieldContractDeployer.sol";
import "./IPendleData.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IPendleForge {
    /**
     * @dev Emitted when the Forge has minted the OT and XYT tokens.
     * @param forgeId The forgeId
     * @param underlyingAsset The address of the underlying yield token.
     * @param expiry The expiry of the XYT token
     * @param amountToTokenize The amount of yield bearing assets to tokenize
     * @param amountTokenMinted The amount of OT/XYT minted
     **/
    event MintYieldTokens(
        bytes32 forgeId,
        address indexed underlyingAsset,
        uint256 indexed expiry,
        uint256 amountToTokenize,
        uint256 amountTokenMinted,
        address indexed user
    );

    /**
     * @dev Emitted when the Forge has created new yield token contracts.
     * @param forgeId The forgeId
     * @param underlyingAsset The address of the underlying asset.
     * @param expiry The date in epoch time when the contract will expire.
     * @param ot The address of the ownership token.
     * @param xyt The address of the new future yield token.
     **/
    event NewYieldContracts(
        bytes32 forgeId,
        address indexed underlyingAsset,
        uint256 indexed expiry,
        address ot,
        address xyt,
        address yieldBearingAsset
    );

    /**
     * @dev Emitted when the Forge has redeemed the OT and XYT tokens.
     * @param forgeId The forgeId
     * @param underlyingAsset the address of the underlying asset
     * @param expiry The expiry of the XYT token
     * @param amountToRedeem The amount of OT to be redeemed.
     * @param redeemedAmount The amount of yield token received
     **/
    event RedeemYieldToken(
        bytes32 forgeId,
        address indexed underlyingAsset,
        uint256 indexed expiry,
        uint256 amountToRedeem,
        uint256 redeemedAmount,
        address indexed user
    );

    /**
     * @dev Emitted when interest claim is settled
     * @param forgeId The forgeId
     * @param underlyingAsset the address of the underlying asset
     * @param expiry The expiry of the XYT token
     * @param user Interest receiver Address
     * @param amount The amount of interest claimed
     **/
    event DueInterestsSettled(
        bytes32 forgeId,
        address indexed underlyingAsset,
        uint256 indexed expiry,
        uint256 amount,
        uint256 forgeFeeAmount,
        address indexed user
    );

    /**
     * @dev Emitted when forge fee is withdrawn
     * @param forgeId The forgeId
     * @param underlyingAsset the address of the underlying asset
     * @param expiry The expiry of the XYT token
     * @param amount The amount of interest claimed
     **/
    event ForgeFeeWithdrawn(
        bytes32 forgeId,
        address indexed underlyingAsset,
        uint256 indexed expiry,
        uint256 amount
    );

    function setUpEmergencyMode(
        address _underlyingAsset,
        uint256 _expiry,
        address spender
    ) external;

    function newYieldContracts(address underlyingAsset, uint256 expiry)
        external
        returns (address ot, address xyt);

    function redeemAfterExpiry(
        address user,
        address underlyingAsset,
        uint256 expiry
    ) external returns (uint256 redeemedAmount);

    function redeemDueInterests(
        address user,
        address underlyingAsset,
        uint256 expiry
    ) external returns (uint256 interests);

    function updateDueInterests(
        address underlyingAsset,
        uint256 expiry,
        address user
    ) external;

    function updatePendingRewards(
        address _underlyingAsset,
        uint256 _expiry,
        address _user
    ) external;

    function redeemUnderlying(
        address user,
        address underlyingAsset,
        uint256 expiry,
        uint256 amountToRedeem
    ) external returns (uint256 redeemedAmount);

    function mintOtAndXyt(
        address underlyingAsset,
        uint256 expiry,
        uint256 amountToTokenize,
        address to
    )
        external
        returns (
            address ot,
            address xyt,
            uint256 amountTokenMinted
        );

    function withdrawForgeFee(address underlyingAsset, uint256 expiry) external;

    function getYieldBearingToken(address underlyingAsset) external returns (address);

    /**
     * @notice Gets a reference to the PendleRouter contract.
     * @return Returns the router contract reference.
     **/
    function router() external view returns (IPendleRouter);

    function data() external view returns (IPendleData);

    function rewardManager() external view returns (IPendleRewardManager);

    function yieldContractDeployer() external view returns (IPendleYieldContractDeployer);

    function rewardToken() external view returns (IERC20);

    /**
     * @notice Gets the bytes32 ID of the forge.
     * @return Returns the forge and protocol identifier.
     **/
    function forgeId() external view returns (bytes32);

    function dueInterests(
        address _underlyingAsset,
        uint256 expiry,
        address _user
    ) external view returns (uint256);

    function yieldTokenHolders(address _underlyingAsset, uint256 _expiry)
        external
        view
        returns (address yieldTokenHolder);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;

interface IPendleLiquidityMining {
    event Funded(uint256[] _rewards, uint256 numberOfEpochs);
    event RewardsToppedUp(uint256[] _epochIds, uint256[] _rewards);
    event AllocationSettingSet(uint256[] _expiries, uint256[] _allocationNumerators);
    event Staked(uint256 expiry, address user, uint256 amount);
    event Withdrawn(uint256 expiry, address user, uint256 amount);
    event PendleRewardsSettled(uint256 expiry, address user, uint256 amount);

    /**
     * @notice fund new epochs
     */
    function fund(uint256[] calldata rewards) external;

    /**
    @notice top up rewards for any funded future epochs (but not to create new epochs)
    */
    function topUpRewards(uint256[] calldata _epochIds, uint256[] calldata _rewards) external;

    /**
     * @notice Stake an exact amount of LP_expiry
     */
    function stake(uint256 expiry, uint256 amount) external returns (address);

    /**
     * @notice Stake an exact amount of LP_expiry, using a permit
     */
    function stakeWithPermit(
        uint256 expiry,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external returns (address);

    /**
     * @notice Withdraw an exact amount of LP_expiry
     */
    function withdraw(uint256 expiry, uint256 amount) external;

    /**
     * @notice Get the pending rewards for a user
     * @return rewards Returns rewards[0] as the rewards available now, as well as rewards
     that can be claimed for subsequent epochs (size of rewards array is numberOfEpochs)
     */
    function redeemRewards(uint256 expiry, address user) external returns (uint256 rewards);

    /**
     * @notice Get the pending LP interests for a staker
     * @return dueInterests Returns the interest amount
     */
    function redeemLpInterests(uint256 expiry, address user)
        external
        returns (uint256 dueInterests);

    /**
     * @notice Let the liqMiningEmergencyHandler call to approve spender to spend tokens from liqMiningContract
     *          and to spend tokensForLpHolder from the respective lp holders for expiries specified
     */
    function setUpEmergencyMode(uint256[] calldata expiries, address spender) external;

    /**
     * @notice Read the all the expiries that user has staked LP for
     */
    function readUserExpiries(address user) external view returns (uint256[] memory expiries);

    /**
     * @notice Read the amount of LP_expiry staked for a user
     */
    function getBalances(uint256 expiry, address user) external view returns (uint256);

    function lpHolderForExpiry(uint256 expiry) external view returns (address);

    function startTime() external view returns (uint256);

    function epochDuration() external view returns (uint256);

    function totalRewardsForEpoch(uint256) external view returns (uint256);

    function numberOfEpochs() external view returns (uint256);

    function vestingEpochs() external view returns (uint256);

    function baseToken() external view returns (address);

    function underlyingAsset() external view returns (address);

    function underlyingYieldToken() external view returns (address);

    function pendleTokenAddress() external view returns (address);

    function marketFactoryId() external view returns (bytes32);

    function forgeId() external view returns (bytes32);

    function forge() external view returns (address);

    function readAllExpiriesLength() external view returns (uint256);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */
pragma solidity 0.7.6;

interface IPendleLpHolder {
    function underlyingYieldToken() external returns (address);

    function pendleMarket() external returns (address);

    function sendLp(address user, uint256 amount) external;

    function sendInterests(address user, uint256 amount) external;

    function redeemLpInterests() external;

    function setUpEmergencyMode(address spender) external;
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;
pragma abicoder v2;

import "./IPendleRouter.sol";
import "./IPendleBaseToken.sol";
import "../libraries/PendleStructs.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IPendleMarket is IERC20 {
    /**
     * @notice Emitted when reserves pool has been updated
     * @param reserve0 The XYT reserves.
     * @param weight0  The XYT weight
     * @param reserve1 The generic token reserves.
     * For the generic Token weight it can be inferred by (2^40) - weight0
     **/
    event Sync(uint256 reserve0, uint256 weight0, uint256 reserve1);

    function setUpEmergencyMode(address spender) external;

    function bootstrap(
        address user,
        uint256 initialXytLiquidity,
        uint256 initialTokenLiquidity
    ) external returns (PendingTransfer[2] memory transfers, uint256 exactOutLp);

    function addMarketLiquiditySingle(
        address user,
        address inToken,
        uint256 inAmount,
        uint256 minOutLp
    ) external returns (PendingTransfer[2] memory transfers, uint256 exactOutLp);

    function addMarketLiquidityDual(
        address user,
        uint256 _desiredXytAmount,
        uint256 _desiredTokenAmount,
        uint256 _xytMinAmount,
        uint256 _tokenMinAmount
    ) external returns (PendingTransfer[2] memory transfers, uint256 lpOut);

    function removeMarketLiquidityDual(
        address user,
        uint256 inLp,
        uint256 minOutXyt,
        uint256 minOutToken
    ) external returns (PendingTransfer[2] memory transfers);

    function removeMarketLiquiditySingle(
        address user,
        address outToken,
        uint256 exactInLp,
        uint256 minOutToken
    ) external returns (PendingTransfer[2] memory transfers);

    function swapExactIn(
        address inToken,
        uint256 inAmount,
        address outToken,
        uint256 minOutAmount
    ) external returns (uint256 outAmount, PendingTransfer[2] memory transfers);

    function swapExactOut(
        address inToken,
        uint256 maxInAmount,
        address outToken,
        uint256 outAmount
    ) external returns (uint256 inAmount, PendingTransfer[2] memory transfers);

    function redeemLpInterests(address user) external returns (uint256 interests);

    function getReserves()
        external
        view
        returns (
            uint256 xytBalance,
            uint256 xytWeight,
            uint256 tokenBalance,
            uint256 tokenWeight,
            uint256 currentBlock
        );

    function factoryId() external view returns (bytes32);

    function token() external view returns (address);

    function xyt() external view returns (address);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;

import "./IPendleRouter.sol";

interface IPendleMarketFactory {
    /**
     * @notice Creates a market given a protocol ID, future yield token, and an ERC20 token.
     * @param xyt Token address of the futuonlyCorere yield token as base asset.
     * @param token Token address of an ERC20 token as quote asset.
     * @return market Returns the address of the newly created market.
     **/
    function createMarket(address xyt, address token) external returns (address market);

    /**
     * @notice Gets a reference to the PendleRouter contract.
     * @return Returns the router contract reference.
     **/
    function router() external view returns (IPendleRouter);

    function marketFactoryId() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */
pragma solidity 0.7.6;

interface IPendlePausingManager {
    event AddPausingAdmin(address admin);
    event RemovePausingAdmin(address admin);
    event PendingForgeEmergencyHandler(address _pendingForgeHandler);
    event PendingMarketEmergencyHandler(address _pendingMarketHandler);
    event PendingLiqMiningEmergencyHandler(address _pendingLiqMiningHandler);
    event ForgeEmergencyHandlerSet(address forgeEmergencyHandler);
    event MarketEmergencyHandlerSet(address marketEmergencyHandler);
    event LiqMiningEmergencyHandlerSet(address liqMiningEmergencyHandler);

    event PausingManagerLocked();
    event ForgeHandlerLocked();
    event MarketHandlerLocked();
    event LiqMiningHandlerLocked();

    event SetForgePaused(bytes32 forgeId, bool settingToPaused);
    event SetForgeAssetPaused(bytes32 forgeId, address underlyingAsset, bool settingToPaused);
    event SetForgeAssetExpiryPaused(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry,
        bool settingToPaused
    );

    event SetForgeLocked(bytes32 forgeId);
    event SetForgeAssetLocked(bytes32 forgeId, address underlyingAsset);
    event SetForgeAssetExpiryLocked(bytes32 forgeId, address underlyingAsset, uint256 expiry);

    event SetMarketFactoryPaused(bytes32 marketFactoryId, bool settingToPaused);
    event SetMarketPaused(bytes32 marketFactoryId, address market, bool settingToPaused);

    event SetMarketFactoryLocked(bytes32 marketFactoryId);
    event SetMarketLocked(bytes32 marketFactoryId, address market);

    event SetLiqMiningPaused(address liqMiningContract, bool settingToPaused);
    event SetLiqMiningLocked(address liqMiningContract);

    function forgeEmergencyHandler()
        external
        view
        returns (
            address handler,
            address pendingHandler,
            uint256 timelockDeadline
        );

    function marketEmergencyHandler()
        external
        view
        returns (
            address handler,
            address pendingHandler,
            uint256 timelockDeadline
        );

    function liqMiningEmergencyHandler()
        external
        view
        returns (
            address handler,
            address pendingHandler,
            uint256 timelockDeadline
        );

    function permLocked() external view returns (bool);

    function permForgeHandlerLocked() external view returns (bool);

    function permMarketHandlerLocked() external view returns (bool);

    function permLiqMiningHandlerLocked() external view returns (bool);

    function isPausingAdmin(address) external view returns (bool);

    function setPausingAdmin(address admin, bool isAdmin) external;

    function requestForgeHandlerChange(address _pendingForgeHandler) external;

    function requestMarketHandlerChange(address _pendingMarketHandler) external;

    function requestLiqMiningHandlerChange(address _pendingLiqMiningHandler) external;

    function applyForgeHandlerChange() external;

    function applyMarketHandlerChange() external;

    function applyLiqMiningHandlerChange() external;

    function lockPausingManagerPermanently() external;

    function lockForgeHandlerPermanently() external;

    function lockMarketHandlerPermanently() external;

    function lockLiqMiningHandlerPermanently() external;

    function setForgePaused(bytes32 forgeId, bool paused) external;

    function setForgeAssetPaused(
        bytes32 forgeId,
        address underlyingAsset,
        bool paused
    ) external;

    function setForgeAssetExpiryPaused(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry,
        bool paused
    ) external;

    function setForgeLocked(bytes32 forgeId) external;

    function setForgeAssetLocked(bytes32 forgeId, address underlyingAsset) external;

    function setForgeAssetExpiryLocked(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry
    ) external;

    function checkYieldContractStatus(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry
    ) external returns (bool _paused, bool _locked);

    function setMarketFactoryPaused(bytes32 marketFactoryId, bool paused) external;

    function setMarketPaused(
        bytes32 marketFactoryId,
        address market,
        bool paused
    ) external;

    function setMarketFactoryLocked(bytes32 marketFactoryId) external;

    function setMarketLocked(bytes32 marketFactoryId, address market) external;

    function checkMarketStatus(bytes32 marketFactoryId, address market)
        external
        returns (bool _paused, bool _locked);

    function setLiqMiningPaused(address liqMiningContract, bool settingToPaused) external;

    function setLiqMiningLocked(address liqMiningContract) external;

    function checkLiqMiningStatus(address liqMiningContract)
        external
        returns (bool _paused, bool _locked);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */
pragma solidity 0.7.6;

interface IPendleRewardManager {
    event UpdateFrequencySet(address[], uint256[]);
    event SkippingRewardsSet(bool);

    event DueRewardsSettled(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry,
        uint256 amountOut,
        address user
    );

    function redeemRewards(
        address _underlyingAsset,
        uint256 _expiry,
        address _user
    ) external returns (uint256 dueRewards);

    function updatePendingRewards(
        address _underlyingAsset,
        uint256 _expiry,
        address _user
    ) external;

    function updateParamLManual(address _underlyingAsset, uint256 _expiry) external;

    function setUpdateFrequency(
        address[] calldata underlyingAssets,
        uint256[] calldata frequencies
    ) external;

    function setSkippingRewards(bool skippingRewards) external;

    function forgeId() external returns (bytes32);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;
pragma abicoder v2;

import "../interfaces/IWETH.sol";
import "./IPendleData.sol";
import "../libraries/PendleStructs.sol";
import "./IPendleMarketFactory.sol";

interface IPendleRouter {
    /**
     * @notice Emitted when a market for a future yield token and an ERC20 token is created.
     * @param marketFactoryId Forge identifier.
     * @param xyt The address of the tokenized future yield token as the base asset.
     * @param token The address of an ERC20 token as the quote asset.
     * @param market The address of the newly created market.
     **/
    event MarketCreated(
        bytes32 marketFactoryId,
        address indexed xyt,
        address indexed token,
        address indexed market
    );

    /**
     * @notice Emitted when a swap happens on the market.
     * @param trader The address of msg.sender.
     * @param inToken The input token.
     * @param outToken The output token.
     * @param exactIn The exact amount being traded.
     * @param exactOut The exact amount received.
     * @param market The market address.
     **/
    event SwapEvent(
        address indexed trader,
        address inToken,
        address outToken,
        uint256 exactIn,
        uint256 exactOut,
        address market
    );

    /**
     * @dev Emitted when user adds liquidity
     * @param sender The user who added liquidity.
     * @param token0Amount the amount of token0 (xyt) provided by user
     * @param token1Amount the amount of token1 provided by user
     * @param market The market address.
     * @param exactOutLp The exact LP minted
     */
    event Join(
        address indexed sender,
        uint256 token0Amount,
        uint256 token1Amount,
        address market,
        uint256 exactOutLp
    );

    /**
     * @dev Emitted when user removes liquidity
     * @param sender The user who removed liquidity.
     * @param token0Amount the amount of token0 (xyt) given to user
     * @param token1Amount the amount of token1 given to user
     * @param market The market address.
     * @param exactInLp The exact Lp to remove
     */
    event Exit(
        address indexed sender,
        uint256 token0Amount,
        uint256 token1Amount,
        address market,
        uint256 exactInLp
    );

    /**
     * @notice Gets a reference to the PendleData contract.
     * @return Returns the data contract reference.
     **/
    function data() external view returns (IPendleData);

    /**
     * @notice Gets a reference of the WETH9 token contract address.
     * @return WETH token reference.
     **/
    function weth() external view returns (IWETH);

    /***********
     *  FORGE  *
     ***********/

    function newYieldContracts(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry
    ) external returns (address ot, address xyt);

    function redeemAfterExpiry(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry
    ) external returns (uint256 redeemedAmount);

    function redeemDueInterests(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry,
        address user
    ) external returns (uint256 interests);

    function redeemUnderlying(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry,
        uint256 amountToRedeem
    ) external returns (uint256 redeemedAmount);

    function renewYield(
        bytes32 forgeId,
        uint256 oldExpiry,
        address underlyingAsset,
        uint256 newExpiry,
        uint256 renewalRate
    )
        external
        returns (
            uint256 redeemedAmount,
            uint256 amountRenewed,
            address ot,
            address xyt,
            uint256 amountTokenMinted
        );

    function tokenizeYield(
        bytes32 forgeId,
        address underlyingAsset,
        uint256 expiry,
        uint256 amountToTokenize,
        address to
    )
        external
        returns (
            address ot,
            address xyt,
            uint256 amountTokenMinted
        );

    /***********
     *  MARKET *
     ***********/

    function addMarketLiquidityDual(
        bytes32 _marketFactoryId,
        address _xyt,
        address _token,
        uint256 _desiredXytAmount,
        uint256 _desiredTokenAmount,
        uint256 _xytMinAmount,
        uint256 _tokenMinAmount
    )
        external
        payable
        returns (
            uint256 amountXytUsed,
            uint256 amountTokenUsed,
            uint256 lpOut
        );

    function addMarketLiquiditySingle(
        bytes32 marketFactoryId,
        address xyt,
        address token,
        bool forXyt,
        uint256 exactInAsset,
        uint256 minOutLp
    ) external payable returns (uint256 exactOutLp);

    function removeMarketLiquidityDual(
        bytes32 marketFactoryId,
        address xyt,
        address token,
        uint256 exactInLp,
        uint256 minOutXyt,
        uint256 minOutToken
    ) external returns (uint256 exactOutXyt, uint256 exactOutToken);

    function removeMarketLiquiditySingle(
        bytes32 marketFactoryId,
        address xyt,
        address token,
        bool forXyt,
        uint256 exactInLp,
        uint256 minOutAsset
    ) external returns (uint256 exactOutXyt, uint256 exactOutToken);

    /**
     * @notice Creates a market given a protocol ID, future yield token, and an ERC20 token.
     * @param marketFactoryId Market Factory identifier.
     * @param xyt Token address of the future yield token as base asset.
     * @param token Token address of an ERC20 token as quote asset.
     * @return market Returns the address of the newly created market.
     **/
    function createMarket(
        bytes32 marketFactoryId,
        address xyt,
        address token
    ) external returns (address market);

    function bootstrapMarket(
        bytes32 marketFactoryId,
        address xyt,
        address token,
        uint256 initialXytLiquidity,
        uint256 initialTokenLiquidity
    ) external payable;

    function swapExactIn(
        address tokenIn,
        address tokenOut,
        uint256 inTotalAmount,
        uint256 minOutTotalAmount,
        bytes32 marketFactoryId
    ) external payable returns (uint256 outTotalAmount);

    function swapExactOut(
        address tokenIn,
        address tokenOut,
        uint256 outTotalAmount,
        uint256 maxInTotalAmount,
        bytes32 marketFactoryId
    ) external payable returns (uint256 inTotalAmount);

    function redeemLpInterests(address market, address user) external returns (uint256 interests);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */
pragma solidity 0.7.6;

interface IPendleWhitelist {
    event AddedToWhiteList(address);
    event RemovedFromWhiteList(address);

    function whitelisted(address) external view returns (bool);

    function addToWhitelist(address[] calldata _addresses) external;

    function removeFromWhitelist(address[] calldata _addresses) external;

    function getWhitelist() external view returns (address[] memory list);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */
pragma solidity 0.7.6;

interface IPendleYieldContractDeployer {
    function forgeId() external returns (bytes32);

    function forgeOwnershipToken(
        address _underlyingAsset,
        string memory _name,
        string memory _symbol,
        uint8 _decimals,
        uint256 _expiry
    ) external returns (address ot);

    function forgeFutureYieldToken(
        address _underlyingAsset,
        string memory _name,
        string memory _symbol,
        uint8 _decimals,
        uint256 _expiry
    ) external returns (address xyt);

    function deployYieldTokenHolder(address yieldToken, uint256 expiry)
        external
        returns (address yieldTokenHolder);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./IPendleBaseToken.sol";
import "./IPendleForge.sol";

interface IPendleYieldToken is IERC20, IPendleBaseToken {
    /**
     * @notice Emitted when burning OT or XYT tokens.
     * @param user The address performing the burn.
     * @param amount The amount to be burned.
     **/
    event Burn(address indexed user, uint256 amount);

    /**
     * @notice Emitted when minting OT or XYT tokens.
     * @param user The address performing the mint.
     * @param amount The amount to be minted.
     **/
    event Mint(address indexed user, uint256 amount);

    /**
     * @notice Burns OT or XYT tokens from user, reducing the total supply.
     * @param user The address performing the burn.
     * @param amount The amount to be burned.
     **/
    function burn(address user, uint256 amount) external;

    /**
     * @notice Mints new OT or XYT tokens for user, increasing the total supply.
     * @param user The address to send the minted tokens.
     * @param amount The amount to be minted.
     **/
    function mint(address user, uint256 amount) external;

    /**
     * @notice Gets the forge address of the PendleForge contract for this yield token.
     * @return Retuns the forge address.
     **/
    function forge() external view returns (IPendleForge);

    /**
     * @notice Returns the address of the underlying asset.
     * @return Returns the underlying asset address.
     **/
    function underlyingAsset() external view returns (address);

    /**
     * @notice Returns the address of the underlying yield token.
     * @return Returns the underlying yield token address.
     **/
    function underlyingYieldToken() external view returns (address);

    /**
     * @notice let the router approve itself to spend OT/XYT/LP from any wallet
     * @param user user to approve
     **/
    function approveRouter(address user) external;
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */

pragma solidity 0.7.6;
pragma abicoder v2;

import "../core/PendleGovernanceManager.sol";

interface IPermissionsV2 {
    function governanceManager() external returns (PendleGovernanceManager);
}

// SPDX-License-Identifier: MIT
/*
 * MIT License
 * ===========
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 */
pragma solidity 0.7.6;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IWETH is IERC20 {
    function deposit() external payable;

    function withdraw(uint256 wad) external;
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.7.0;
pragma abicoder v2;

import "@openzeppelin/contracts/math/SafeMath.sol";

library Math {
    using SafeMath for uint256;

    uint256 internal constant BIG_NUMBER = (uint256(1) << uint256(200));
    uint256 internal constant PRECISION_BITS = 40;
    uint256 internal constant RONE = uint256(1) << PRECISION_BITS;
    uint256 internal constant PI = (314 * RONE) / 10**2;
    uint256 internal constant PI_PLUSONE = (414 * RONE) / 10**2;
    uint256 internal constant PRECISION_POW = 1e2;

    function checkMultOverflow(uint256 _x, uint256 _y) internal pure returns (bool) {
        if (_y == 0) return false;
        return (((_x * _y) / _y) != _x);
    }

    /**
    @notice find the integer part of log2(p/q)
        => find largest x s.t p >= q * 2^x
        => find largest x s.t 2^x <= p / q
     */
    function log2Int(uint256 _p, uint256 _q) internal pure returns (uint256) {
        uint256 res = 0;
        uint256 remain = _p / _q;
        while (remain > 0) {
            res++;
            remain /= 2;
        }
        return res - 1;
    }

    /**
    @notice log2 for a number that it in [1,2)
    @dev _x is FP, return a FP
    @dev function is from Kyber. Long modified the condition to be (_x >= one) && (_x < two)
    to avoid the case where x = 2 may lead to incorrect result
     */
    function log2ForSmallNumber(uint256 _x) internal pure returns (uint256) {
        uint256 res = 0;
        uint256 one = (uint256(1) << PRECISION_BITS);
        uint256 two = 2 * one;
        uint256 addition = one;

        require((_x >= one) && (_x < two), "MATH_ERROR");
        require(PRECISION_BITS < 125, "MATH_ERROR");

        for (uint256 i = PRECISION_BITS; i > 0; i--) {
            _x = (_x * _x) / one;
            addition = addition / 2;
            if (_x >= two) {
                _x = _x / 2;
                res += addition;
            }
        }

        return res;
    }

    /**
    @notice log2 of (p/q). returns result in FP form
    @dev function is from Kyber.
    @dev _p & _q is FP, return a FP
     */
    function logBase2(uint256 _p, uint256 _q) internal pure returns (uint256) {
        uint256 n = 0;

        if (_p > _q) {
            n = log2Int(_p, _q);
        }

        require(n * RONE <= BIG_NUMBER, "MATH_ERROR");
        require(!checkMultOverflow(_p, RONE), "MATH_ERROR");
        require(!checkMultOverflow(n, RONE), "MATH_ERROR");
        require(!checkMultOverflow(uint256(1) << n, _q), "MATH_ERROR");

        uint256 y = (_p * RONE) / (_q * (uint256(1) << n));
        uint256 log2Small = log2ForSmallNumber(y);

        assert(log2Small <= BIG_NUMBER);

        return n * RONE + log2Small;
    }

    /**
    @notice calculate ln(p/q). returned result >= 0
    @dev function is from Kyber.
    @dev _p & _q is FP, return a FP
    */
    function ln(uint256 p, uint256 q) internal pure returns (uint256) {
        uint256 ln2Numerator = 6931471805599453094172;
        uint256 ln2Denomerator = 10000000000000000000000;

        uint256 log2x = logBase2(p, q);

        require(!checkMultOverflow(ln2Numerator, log2x), "MATH_ERROR");

        return (ln2Numerator * log2x) / ln2Denomerator;
    }

    /**
    @notice extract the fractional part of a FP
    @dev value is a FP, return a FP
     */
    function fpart(uint256 value) internal pure returns (uint256) {
        return value % RONE;
    }

    /**
    @notice convert a FP to an Int
    @dev value is a FP, return an Int
     */
    function toInt(uint256 value) internal pure returns (uint256) {
        return value / RONE;
    }

    /**
    @notice convert an Int to a FP
    @dev value is an Int, return a FP
     */
    function toFP(uint256 value) internal pure returns (uint256) {
        return value * RONE;
    }

    /**
    @notice return e^exp in FP form
    @dev estimation by formula at http://pages.mtu.edu/~shene/COURSES/cs201/NOTES/chap04/exp.html
        the function is based on exp function of:
        https://github.com/NovakDistributed/macroverse/blob/master/contracts/RealMath.sol
    @dev the function is expected to converge quite fast, after about 20 iteration
    @dev exp is a FP, return a FP
     */
    function rpowe(uint256 exp) internal pure returns (uint256) {
        uint256 res = 0;

        uint256 curTerm = RONE;

        for (uint256 n = 0; ; n++) {
            res += curTerm;
            curTerm = rmul(curTerm, rdiv(exp, toFP(n + 1)));
            if (curTerm == 0) {
                break;
            }
            if (n == 500) {
                /*
                testing shows that in the most extreme case, it will take 430 turns to converge.
                however, it's expected that the numbers will not exceed 2^120 in normal situation
                the most extreme case is rpow((1<<256)-1,(1<<40)-1) (equal to rpow((2^256-1)/2^40,0.99..9))
                */
                revert("RPOWE_SLOW_CONVERGE");
            }
        }

        return res;
    }

    /**
    @notice calculate base^exp with base and exp being FP int
    @dev to improve accuracy, base^exp = base^(int(exp)+frac(exp))
                                       = base^int(exp) * base^frac
    @dev base & exp are FP, return a FP
     */
    function rpow(uint256 base, uint256 exp) internal pure returns (uint256) {
        if (exp == 0) {
            // Anything to the 0 is 1
            return RONE;
        }
        if (base == 0) {
            // 0 to anything except 0 is 0
            return 0;
        }

        uint256 frac = fpart(exp); // get the fractional part
        uint256 whole = exp - frac;

        uint256 wholePow = rpowi(base, toInt(whole)); // whole is a FP, convert to Int
        uint256 fracPow;

        // instead of calculating base ^ frac, we will calculate e ^ (frac*ln(base))
        if (base < RONE) {
            /* since the base is smaller than 1.0, ln(base) < 0.
            Since 1 / (e^(frac*ln(1/base))) = e ^ (frac*ln(base)),
            we will calculate 1 / (e^(frac*ln(1/base))) instead.
            */
            uint256 newExp = rmul(frac, ln(rdiv(RONE, base), RONE));
            fracPow = rdiv(RONE, rpowe(newExp));
        } else {
            /* base is greater than 1, calculate normally */
            uint256 newExp = rmul(frac, ln(base, RONE));
            fracPow = rpowe(newExp);
        }
        return rmul(wholePow, fracPow);
    }

    /**
    @notice return base^exp with base in FP form and exp in Int
    @dev this function use a technique called: exponentiating by squaring
        complexity O(log(q))
    @dev function is from Kyber.
    @dev base is a FP, exp is an Int, return a FP
     */
    function rpowi(uint256 base, uint256 exp) internal pure returns (uint256) {
        uint256 res = exp % 2 != 0 ? base : RONE;

        for (exp /= 2; exp != 0; exp /= 2) {
            base = rmul(base, base);

            if (exp % 2 != 0) {
                res = rmul(res, base);
            }
        }
        return res;
    }

    /**
    @dev y is an Int, returns an Int
    @dev babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    @dev from Uniswap
     */
    function sqrt(uint256 y) internal pure returns (uint256 z) {
        if (y > 3) {
            z = y;
            uint256 x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }

    /**
    @notice divide 2 FP, return a FP
    @dev function is from Balancer.
    @dev x & y are FP, return a FP
     */
    function rdiv(uint256 x, uint256 y) internal pure returns (uint256) {
        return (y / 2).add(x.mul(RONE)).div(y);
    }

    /**
    @notice multiply 2 FP, return a FP
    @dev function is from Balancer.
    @dev x & y are FP, return a FP
     */
    function rmul(uint256 x, uint256 y) internal pure returns (uint256) {
        return (RONE / 2).add(x.mul(y)).div(RONE);
    }

    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    function subMax0(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a - b : 0;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;

import "../../libraries/MathLib.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "../../interfaces/IPendleCompoundForge.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./../abstract/PendleLiquidityMiningBase.sol";

/**
    @dev things that must hold in this contract:
     - If an user's stake information is updated (hence lastTimeUserStakeUpdated is changed),
        then his pending rewards are calculated as well
        (and saved in availableRewardsForEpoch[user][epochId])
 */
contract PendleCompoundLiquidityMining is PendleLiquidityMiningBase {
    using Math for uint256;
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    mapping(uint256 => uint256) private globalLastExchangeRate;

    constructor(
        address _governanceManager,
        address _pausingManager,
        address _whitelist,
        address _pendleTokenAddress,
        address _pendleRouter, // The router basically identify our Pendle instance.
        bytes32 _pendleMarketFactoryId,
        bytes32 _pendleForgeId,
        address _underlyingAsset,
        address _baseToken,
        uint256 _startTime,
        uint256 _epochDuration,
        uint256 _vestingEpochs
    )
        PendleLiquidityMiningBase(
            _governanceManager,
            _pausingManager,
            _whitelist,
            _pendleTokenAddress,
            _pendleRouter,
            _pendleMarketFactoryId,
            _pendleForgeId,
            _underlyingAsset,
            _baseToken,
            _startTime,
            _epochDuration,
            _vestingEpochs
        )
    {}

    function _getExchangeRate() internal returns (uint256) {
        return IPendleCompoundForge(forge).getExchangeRate(underlyingAsset);
    }

    /**
    * Very similar to the function in PendleAaveMarket. Any major differences are likely to be bugs
        Please refer to it for more details
    */
    function _updateDueInterests(uint256 expiry, address user) internal override {
        ExpiryData storage exd = expiryData[expiry];
        require(exd.lpHolder != address(0), "INVALID_EXPIRY");

        _updateParamL(expiry);
        uint256 paramL = exd.paramL;
        uint256 userLastParamL = exd.lastParamL[user];

        if (userLastParamL == 0) {
            exd.lastParamL[user] = paramL;
            return;
        }

        uint256 principal = exd.balances[user];
        uint256 interestValuePerLP = paramL.sub(userLastParamL);

        uint256 interestFromLp = principal.mul(interestValuePerLP).div(MULTIPLIER);

        exd.dueInterests[user] = exd.dueInterests[user].add(interestFromLp);
        exd.lastParamL[user] = paramL;
    }

    /**
    * Very similar to the function in PendleCompoundMarket. Any major differences are likely to be bugs
        Please refer to it for more details
    */
    function _getFirstTermAndParamR(uint256 expiry, uint256 currentNYield)
        internal
        override
        returns (uint256 firstTerm, uint256 paramR)
    {
        ExpiryData storage exd = expiryData[expiry];
        firstTerm = exd.paramL;
        paramR = currentNYield.sub(exd.lastNYield);
        globalLastExchangeRate[expiry] = _getExchangeRate();
    }

    function _afterAddingNewExpiry(uint256 expiry) internal override {
        expiryData[expiry].paramL = 1; // we only use differences between paramL so we can just set an arbitrary initial number
        globalLastExchangeRate[expiry] = _getExchangeRate();
    }

    /**
    * Very similar to the function in PendleAaveMarket. Any major differences are likely to be bugs
        Please refer to it for more details
    */
    function _getIncomeIndexIncreaseRate(uint256 expiry)
        internal
        override
        returns (uint256 increaseRate)
    {
        return _getExchangeRate().rdiv(globalLastExchangeRate[expiry]) - Math.RONE;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;

import "../compound/PendleCompoundLiquidityMining.sol";

contract PendleGenericLiquidityMining is PendleCompoundLiquidityMining {
    constructor(
        address _governanceManager,
        address _pausingManager,
        address _whitelist,
        address _pendleTokenAddress,
        address _pendleRouter,
        bytes32 _pendleMarketFactoryId,
        bytes32 _pendleForgeId,
        address _underlyingAsset,
        address _baseToken,
        uint256 _startTime,
        uint256 _epochDuration,
        uint256 _vestingEpochs
    )
        PendleCompoundLiquidityMining(
            _governanceManager,
            _pausingManager,
            _whitelist,
            _pendleTokenAddress,
            _pendleRouter,
            _pendleMarketFactoryId,
            _pendleForgeId,
            _underlyingAsset,
            _baseToken,
            _startTime,
            _epochDuration,
            _vestingEpochs
        )
    {}
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;

contract PendleGovernanceManager {
    address public governance;
    address public pendingGovernance;

    event GovernanceClaimed(address newGovernance, address previousGovernance);

    event TransferGovernancePending(address pendingGovernance);

    constructor(address _governance) {
        require(_governance != address(0), "ZERO_ADDRESS");
        governance = _governance;
    }

    modifier onlyGovernance() {
        require(msg.sender == governance, "ONLY_GOVERNANCE");
        _;
    }

    /**
     * @dev Allows the pendingGovernance address to finalize the change governance process.
     */
    function claimGovernance() external {
        require(pendingGovernance == msg.sender, "WRONG_GOVERNANCE");
        emit GovernanceClaimed(pendingGovernance, governance);
        governance = pendingGovernance;
        pendingGovernance = address(0);
    }

    /**
     * @dev Allows the current governance to set the pendingGovernance address.
     * @param _governance The address to transfer ownership to.
     */
    function transferGovernance(address _governance) external onlyGovernance {
        require(_governance != address(0), "ZERO_ADDRESS");
        pendingGovernance = _governance;

        emit TransferGovernancePending(pendingGovernance);
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;

import "../../libraries/MathLib.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "../../interfaces/IPendleForge.sol";
import "../../interfaces/IPendleData.sol";
import "../../interfaces/IPendleLpHolder.sol";
import "../../core/PendleLpHolder.sol";
import "../../interfaces/IPendleLiquidityMining.sol";
import "../../interfaces/IPendleWhitelist.sol";
import "../../interfaces/IPendlePausingManager.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/Address.sol";

/**
@dev things that must hold in this contract:
 - If an user's stake information is updated (hence lastTimeUserStakeUpdated is changed),
    then his pending rewards are calculated as well
    (and saved in availableRewardsForEpoch[user][epochId])
@dev We define 1 Unit = 1 LP stake in contract 1 second. For example, 20 LP stakes 30 secs will create 600 units for the user
@dev Basically the logic of distributing rewards is very simple: For each epoch, we calculate how many units that each user
has contributed in this epoch. The rewards will be distributed proportionately based on that number
@dev IMPORTANT: All markets with the same triplets of (marketFactoryId,XYT,baseToken) will share the same LiqMining contract
I.e: All the markets using the same LiqMining contract are only different from each other by their expiries
@dev CORE LOGIC: So in a single LiqMining contract:
* the rewards will be distributed among different expiries by ratios set by Governance
* In a single expiry, the reward will be distributed by the ratio of units (explained above)
*/
abstract contract PendleLiquidityMiningBase is
    IPendleLiquidityMining,
    WithdrawableV2,
    ReentrancyGuard
{
    using Math for uint256;
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    struct UserExpiries {
        uint256[] expiries;
        mapping(uint256 => bool) hasExpiry;
    }

    struct EpochData {
        // total units for different expiries in this epoch
        mapping(uint256 => uint256) stakeUnitsForExpiry;
        // the last time in this epoch that we updated the stakeUnits for this expiry
        mapping(uint256 => uint256) lastUpdatedForExpiry;
        /* availableRewardsForEpoch[user][epochId] is the amount of PENDLEs the user can withdraw
        at the beginning of epochId*/
        mapping(address => uint256) availableRewardsForUser;
        // number of units an user has contributed in this epoch & expiry
        mapping(address => mapping(uint256 => uint256)) stakeUnitsForUser;
        // the reward setting to use
        uint256 settingId;
        // totalRewards for this epoch
        uint256 totalRewards;
    }

    // For each expiry, we will have one struct
    struct ExpiryData {
        // the last time the units of an user was updated in this expiry
        mapping(address => uint256) lastTimeUserStakeUpdated; // map user => time
        // the last epoch the user claimed rewards. After the rewards an epoch has been claimed, there won't be any
        // additional rewards in that epoch for the user to claim
        mapping(address => uint256) lastEpochClaimed;
        // total amount of LP in this expiry (to use for units calculation)
        uint256 totalStakeLP;
        // lpHolder contract for this expiry
        address lpHolder;
        // the LP balances for each user in this expiry
        mapping(address => uint256) balances;
        // variables for lp interest calculations
        uint256 lastNYield;
        uint256 paramL;
        mapping(address => uint256) lastParamL;
        mapping(address => uint256) dueInterests;
    }

    struct LatestSetting {
        uint256 id;
        uint256 firstEpochToApply;
    }

    IPendleWhitelist public immutable whitelist;
    IPendleRouter public immutable router;
    IPendleData public immutable data;
    address public immutable override pendleTokenAddress;
    bytes32 public immutable override forgeId;
    address public immutable override forge;
    bytes32 public immutable override marketFactoryId;
    IPendlePausingManager private immutable pausingManager;

    address public immutable override underlyingAsset;
    address public immutable override underlyingYieldToken;
    address public immutable override baseToken;
    uint256 public immutable override startTime;
    uint256 public immutable override epochDuration;
    uint256 public override numberOfEpochs;
    uint256 public immutable override vestingEpochs;
    bool public funded;

    uint256[] public allExpiries;
    uint256 private constant ALLOCATION_DENOMINATOR = 1_000_000_000;
    uint256 internal constant MULTIPLIER = 10**20;

    // allocationSettings[settingId][expiry] = rewards portion of a pool for settingId
    mapping(uint256 => mapping(uint256 => uint256)) public allocationSettings;
    LatestSetting public latestSetting;

    mapping(uint256 => ExpiryData) internal expiryData;
    mapping(uint256 => EpochData) private epochData;
    mapping(address => UserExpiries) private userExpiries;

    modifier isFunded() {
        require(funded, "NOT_FUNDED");
        _;
    }

    modifier nonContractOrWhitelisted() {
        bool isEOA = !Address.isContract(msg.sender) && tx.origin == msg.sender;
        require(isEOA || whitelist.whitelisted(msg.sender), "CONTRACT_NOT_WHITELISTED");
        _;
    }

    constructor(
        address _governanceManager,
        address _pausingManager,
        address _whitelist,
        address _pendleTokenAddress,
        address _router,
        bytes32 _marketFactoryId,
        bytes32 _forgeId,
        address _underlyingAsset,
        address _baseToken,
        uint256 _startTime,
        uint256 _epochDuration,
        uint256 _vestingEpochs
    ) PermissionsV2(_governanceManager) {
        require(_startTime > block.timestamp, "START_TIME_OVER");
        require(IERC20(_pendleTokenAddress).totalSupply() > 0, "INVALID_ERC20");
        require(IERC20(_underlyingAsset).totalSupply() > 0, "INVALID_ERC20");
        require(IERC20(_baseToken).totalSupply() > 0, "INVALID_ERC20");
        require(_vestingEpochs > 0, "INVALID_VESTING_EPOCHS");

        pendleTokenAddress = _pendleTokenAddress;
        router = IPendleRouter(_router);
        whitelist = IPendleWhitelist(_whitelist);
        IPendleData _dataTemp = IPendleRouter(_router).data();
        data = _dataTemp;
        require(
            _dataTemp.getMarketFactoryAddress(_marketFactoryId) != address(0),
            "INVALID_MARKET_FACTORY_ID"
        );
        require(_dataTemp.getForgeAddress(_forgeId) != address(0), "INVALID_FORGE_ID");

        address _forgeTemp = _dataTemp.getForgeAddress(_forgeId);
        forge = _forgeTemp;
        underlyingYieldToken = IPendleForge(_forgeTemp).getYieldBearingToken(_underlyingAsset);
        pausingManager = IPendlePausingManager(_pausingManager);
        marketFactoryId = _marketFactoryId;
        forgeId = _forgeId;
        underlyingAsset = _underlyingAsset;
        baseToken = _baseToken;
        startTime = _startTime;
        epochDuration = _epochDuration;
        vestingEpochs = _vestingEpochs;
    }

    // Only the liqMiningEmergencyHandler can call this function, when its in emergencyMode
    // this will allow a spender to spend the whole balance of the specified tokens from this contract
    // as well as to spend tokensForLpHolder from the respective lp holders for expiries specified
    // the spender should ideally be a contract with logic for users to withdraw out their funds.
    function setUpEmergencyMode(uint256[] calldata expiries, address spender) external override {
        (, bool emergencyMode) = pausingManager.checkLiqMiningStatus(address(this));
        require(emergencyMode, "NOT_EMERGENCY");

        (address liqMiningEmergencyHandler, , ) = pausingManager.liqMiningEmergencyHandler();
        require(msg.sender == liqMiningEmergencyHandler, "NOT_EMERGENCY_HANDLER");

        for (uint256 i = 0; i < expiries.length; i++) {
            IPendleLpHolder(expiryData[expiries[i]].lpHolder).setUpEmergencyMode(spender);
        }
        IERC20(pendleTokenAddress).approve(spender, type(uint256).max);
    }

    /**
     * @notice fund new epochs
     * @dev Once the last epoch is over, the program is permanently override
     * @dev the settings must be set before epochs can be funded
        => if funded=true, means that epochs have been funded & have already has valid allocation settings
     * conditions:
        * Must only be called by governance
     */
    function fund(uint256[] calldata _rewards) external override onlyGovernance {
        checkNotPaused();
        // Can only be fund if there is already a setting
        require(latestSetting.id > 0, "NO_ALLOC_SETTING");
        // Once the program is over, cannot fund
        require(_getCurrentEpochId() <= numberOfEpochs, "LAST_EPOCH_OVER");

        uint256 nNewEpochs = _rewards.length;
        uint256 totalFunded;
        // all the funding will be used for new epochs
        for (uint256 i = 0; i < nNewEpochs; i++) {
            totalFunded = totalFunded.add(_rewards[i]);
            epochData[numberOfEpochs + i + 1].totalRewards = _rewards[i];
        }

        require(totalFunded > 0, "ZERO_FUND");
        funded = true;
        numberOfEpochs = numberOfEpochs.add(nNewEpochs);
        IERC20(pendleTokenAddress).safeTransferFrom(msg.sender, address(this), totalFunded);
        emit Funded(_rewards, numberOfEpochs);
    }

    /**
    @notice top up rewards for any funded future epochs (but not to create new epochs)
    * conditions:
        * Must only be called by governance
        * The contract must have been funded already
    */
    function topUpRewards(uint256[] calldata _epochIds, uint256[] calldata _rewards)
        external
        override
        onlyGovernance
        isFunded
    {
        checkNotPaused();
        require(latestSetting.id > 0, "NO_ALLOC_SETTING");
        require(_epochIds.length == _rewards.length, "INVALID_ARRAYS");

        uint256 curEpoch = _getCurrentEpochId();
        uint256 endEpoch = numberOfEpochs;
        uint256 totalTopUp;

        for (uint256 i = 0; i < _epochIds.length; i++) {
            require(curEpoch < _epochIds[i] && _epochIds[i] <= endEpoch, "INVALID_EPOCH_ID");
            totalTopUp = totalTopUp.add(_rewards[i]);
            epochData[_epochIds[i]].totalRewards = epochData[_epochIds[i]].totalRewards.add(
                _rewards[i]
            );
        }

        require(totalTopUp > 0, "ZERO_FUND");
        IERC20(pendleTokenAddress).safeTransferFrom(msg.sender, address(this), totalTopUp);
        emit RewardsToppedUp(_epochIds, _rewards);
    }

    /**
    @notice set a new allocation setting, which will be applied from the next epoch onwards
    @dev  all the epochData from latestSetting.firstEpochToApply+1 to current epoch will follow the previous
    allocation setting
    @dev We must set the very first allocation setting before the start of epoch 1,
            otherwise epoch 1 will not have any allocation setting!
        In that case, we will not be able to set any allocation and hence its not possible to
            fund the contract as well
        => We should just throw this contract away, and funds are SAFU!
    @dev the length of _expiries array is expected to be small, 2 or 3
    @dev it's intentional that we don't check the existence of expiries
     */
    function setAllocationSetting(
        uint256[] calldata _expiries,
        uint256[] calldata _allocationNumerators
    ) external onlyGovernance {
        checkNotPaused();
        require(_expiries.length == _allocationNumerators.length, "INVALID_ALLOCATION");
        if (latestSetting.id == 0) {
            require(block.timestamp < startTime, "LATE_FIRST_ALLOCATION");
        }

        uint256 curEpoch = _getCurrentEpochId();
        // set the settingId for past epochs
        for (uint256 i = latestSetting.firstEpochToApply; i <= curEpoch; i++) {
            epochData[i].settingId = latestSetting.id;
        }

        // create a new setting that will be applied from the next epoch onwards
        latestSetting.firstEpochToApply = curEpoch + 1;
        latestSetting.id++;

        uint256 sumAllocationNumerators;
        for (uint256 _i = 0; _i < _expiries.length; _i++) {
            allocationSettings[latestSetting.id][_expiries[_i]] = _allocationNumerators[_i];
            sumAllocationNumerators = sumAllocationNumerators.add(_allocationNumerators[_i]);
        }
        require(sumAllocationNumerators == ALLOCATION_DENOMINATOR, "INVALID_ALLOCATION");
        emit AllocationSettingSet(_expiries, _allocationNumerators);
    }

    /**
     * @notice Use to stake their LPs to a specific expiry
     * @param newLpHoldingContractAddress will be /= 0 in case a new lpHolder contract is deployed
    Conditions:
        * only be called if the contract has been funded
        * must have Reentrancy protection
        * only be called if 0 < current epoch <= numberOfEpochs
    Note:
        * Even if an expiry currently has zero rewards allocated to it, we still allow users to stake their
        LP in
     */
    function stake(uint256 expiry, uint256 amount)
        external
        override
        isFunded
        nonReentrant
        nonContractOrWhitelisted
        returns (address newLpHoldingContractAddress)
    {
        checkNotPaused();
        newLpHoldingContractAddress = _stake(expiry, amount);
    }

    /**
     * @notice Similar to stake() function, but using a permit to approve for LP tokens first
     */
    function stakeWithPermit(
        uint256 expiry,
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
        override
        isFunded
        nonReentrant
        nonContractOrWhitelisted
        returns (address newLpHoldingContractAddress)
    {
        checkNotPaused();
        address xyt = address(data.xytTokens(forgeId, underlyingAsset, expiry));
        address marketAddress = data.getMarket(marketFactoryId, xyt, baseToken);
        // Pendle Market LP tokens are EIP-2612 compliant, hence we can approve liq-mining contract using a signature
        IPendleYieldToken(marketAddress).permit(
            msg.sender,
            address(this),
            amount,
            deadline,
            v,
            r,
            s
        );

        newLpHoldingContractAddress = _stake(expiry, amount);
    }

    /**
     * @notice Use to withdraw their LP from a specific expiry
    Conditions:
        * only be called if the contract has been funded.
        * must have Reentrancy protection
        * only be called if 0 < current epoch (always can withdraw)
     */
    function withdraw(uint256 expiry, uint256 amount) external override nonReentrant isFunded {
        checkNotPaused();
        uint256 curEpoch = _getCurrentEpochId();
        require(curEpoch > 0, "NOT_STARTED");
        require(amount != 0, "ZERO_AMOUNT");

        ExpiryData storage exd = expiryData[expiry];
        require(exd.balances[msg.sender] >= amount, "INSUFFICIENT_BALANCE");

        _pushLpToken(expiry, amount);
        emit Withdrawn(expiry, msg.sender, amount);
    }

    /**
     * @notice use to claim PENDLE rewards
    Conditions:
        * only be called if the contract has been funded.
        * must have Reentrancy protection
        * only be called if 0 < current epoch (always can withdraw)
        * Anyone can call it (and claim it for any other user)
     */
    function redeemRewards(uint256 expiry, address user)
        external
        override
        isFunded
        nonReentrant
        returns (uint256 rewards)
    {
        checkNotPaused();
        uint256 curEpoch = _getCurrentEpochId();
        require(curEpoch > 0, "NOT_STARTED");
        require(user != address(0), "ZERO_ADDRESS");
        require(userExpiries[user].hasExpiry[expiry], "INVALID_EXPIRY");

        rewards = _beforeTransferPendingRewards(expiry, user);
        if (rewards != 0) {
            IERC20(pendleTokenAddress).safeTransfer(user, rewards);
        }
    }

    /**
     * @notice use to claim lpInterest
    Conditions:
        * must have Reentrancy protection
        * Anyone can call it (and claim it for any other user)
     */
    function redeemLpInterests(uint256 expiry, address user)
        external
        override
        nonReentrant
        returns (uint256 interests)
    {
        checkNotPaused();
        require(user != address(0), "ZERO_ADDRESS");
        require(userExpiries[user].hasExpiry[expiry], "INVALID_EXPIRY");
        interests = _beforeTransferDueInterests(expiry, user);
        _safeTransferYieldToken(expiry, user, interests);
    }

    function totalRewardsForEpoch(uint256 epochId)
        external
        view
        override
        returns (uint256 rewards)
    {
        rewards = epochData[epochId].totalRewards;
    }

    function readUserExpiries(address _user)
        external
        view
        override
        returns (uint256[] memory _expiries)
    {
        _expiries = userExpiries[_user].expiries;
    }

    function getBalances(uint256 expiry, address user) external view override returns (uint256) {
        return expiryData[expiry].balances[user];
    }

    function lpHolderForExpiry(uint256 expiry) external view override returns (address) {
        return expiryData[expiry].lpHolder;
    }

    function readExpiryData(uint256 expiry)
        external
        view
        returns (
            uint256 totalStakeLP,
            uint256 lastNYield,
            uint256 paramL,
            address lpHolder
        )
    {
        totalStakeLP = expiryData[expiry].totalStakeLP;
        lastNYield = expiryData[expiry].lastNYield;
        paramL = expiryData[expiry].paramL;
        lpHolder = expiryData[expiry].lpHolder;
    }

    function readUserSpecificExpiryData(uint256 expiry, address user)
        external
        view
        returns (
            uint256 lastTimeUserStakeUpdated,
            uint256 lastEpochClaimed,
            uint256 balances,
            uint256 lastParamL,
            uint256 dueInterests
        )
    {
        lastTimeUserStakeUpdated = expiryData[expiry].lastTimeUserStakeUpdated[user];
        lastEpochClaimed = expiryData[expiry].lastEpochClaimed[user];
        balances = expiryData[expiry].balances[user];
        lastParamL = expiryData[expiry].lastParamL[user];
        dueInterests = expiryData[expiry].dueInterests[user];
    }

    function readEpochData(uint256 epochId)
        external
        view
        returns (uint256 settingId, uint256 totalRewards)
    {
        settingId = epochData[epochId].settingId;
        totalRewards = epochData[epochId].totalRewards;
    }

    function readExpirySpecificEpochData(uint256 epochId, uint256 expiry)
        external
        view
        returns (uint256 stakeUnits, uint256 lastUpdatedForExpiry)
    {
        stakeUnits = epochData[epochId].stakeUnitsForExpiry[expiry];
        lastUpdatedForExpiry = epochData[epochId].lastUpdatedForExpiry[expiry];
    }

    function readAvailableRewardsForUser(uint256 epochId, address user)
        external
        view
        returns (uint256 availableRewardsForUser)
    {
        availableRewardsForUser = epochData[epochId].availableRewardsForUser[user];
    }

    function readStakeUnitsForUser(
        uint256 epochId,
        address user,
        uint256 expiry
    ) external view returns (uint256 stakeUnitsForUser) {
        stakeUnitsForUser = epochData[epochId].stakeUnitsForUser[user][expiry];
    }

    function readAllExpiriesLength() external view override returns (uint256 length) {
        length = allExpiries.length;
    }

    function checkNotPaused() internal {
        (bool paused, ) = pausingManager.checkLiqMiningStatus(address(this));
        require(!paused, "LIQ_MINING_PAUSED");
    }

    function _stake(uint256 expiry, uint256 amount)
        internal
        returns (address newLpHoldingContractAddress)
    {
        ExpiryData storage exd = expiryData[expiry];
        uint256 curEpoch = _getCurrentEpochId();
        require(curEpoch > 0, "NOT_STARTED");
        require(curEpoch <= numberOfEpochs, "INCENTIVES_PERIOD_OVER");
        require(amount != 0, "ZERO_AMOUNT");

        address xyt = address(data.xytTokens(forgeId, underlyingAsset, expiry));
        address marketAddress = data.getMarket(marketFactoryId, xyt, baseToken);
        require(xyt != address(0), "YT_NOT_FOUND");
        require(marketAddress != address(0), "MARKET_NOT_FOUND");

        // there is no lpHolder for this expiry yet, we will create one
        if (exd.lpHolder == address(0)) {
            newLpHoldingContractAddress = _addNewExpiry(expiry, marketAddress);
        }

        if (!userExpiries[msg.sender].hasExpiry[expiry]) {
            userExpiries[msg.sender].expiries.push(expiry);
            userExpiries[msg.sender].hasExpiry[expiry] = true;
        }

        _pullLpToken(marketAddress, expiry, amount);
        emit Staked(expiry, msg.sender, amount);
    }

    /**
    @notice update the following stake data for the current epoch:
        - epochData[_curEpoch].stakeUnitsForExpiry
        - epochData[_curEpoch].lastUpdatedForExpiry
    @dev If this is the very first transaction involving this expiry, then need to update for the
    previous epoch as well. If the previous didn't have any transactions at all, (and hence was not
    updated at all), we need to update it and check the previous previous ones, and so on..
    @dev must be called right before every _updatePendingRewards()
    @dev this is the only function that updates lastTimeUserStakeUpdated & stakeUnitsForExpiry
    @dev other functions must make sure that totalStakeLPForExpiry could be assumed
        to stay exactly the same since lastTimeUserStakeUpdated until now;
    @dev to be called only by _updatePendingRewards
     */
    function _updateStakeDataForExpiry(uint256 expiry) internal {
        uint256 _curEpoch = _getCurrentEpochId();

        // loop through all epochData in descending order
        for (uint256 i = Math.min(_curEpoch, numberOfEpochs); i > 0; i--) {
            uint256 epochEndTime = _endTimeOfEpoch(i);
            uint256 lastUpdatedForEpoch = epochData[i].lastUpdatedForExpiry[expiry];

            if (lastUpdatedForEpoch == epochEndTime) {
                break; // its already updated until this epoch, our job here is done
            }

            // if the epoch hasn't been fully updated yet, we will update it
            // just add the amount of units contributed by users since lastUpdatedForEpoch -> now
            // by calling _calcUnitsStakeInEpoch
            epochData[i].stakeUnitsForExpiry[expiry] = epochData[i].stakeUnitsForExpiry[expiry]
                .add(
                _calcUnitsStakeInEpoch(expiryData[expiry].totalStakeLP, lastUpdatedForEpoch, i)
            );
            // If the epoch has ended, lastUpdated = epochEndTime
            // If not yet, lastUpdated = block.timestamp (aka now)
            epochData[i].lastUpdatedForExpiry[expiry] = Math.min(block.timestamp, epochEndTime);
        }
    }

    /**
    @notice Update pending rewards to users
        The rewards are calculated since the last time rewards was calculated for him,
        I.e. Since the last time his stake was "updated"
        I.e. Since lastTimeUserStakeUpdated[user]
    @dev The user's stake since lastTimeUserStakeUpdated[user] until now = balances[user][expiry]
    @dev After this function, the following should be updated correctly up to this point:
            - availableRewardsForEpoch[user][all epochData]
            - epochData[all epochData].stakeUnitsForUser
    @dev This must be called before any transfer action of LP (push LP, pull LP)
        (and this has been implemented in two functions _pushLpToken & _pullLpToken of this contract)
    */
    function _updatePendingRewards(uint256 expiry, address user) internal {
        _updateStakeDataForExpiry(expiry);
        ExpiryData storage exd = expiryData[expiry];

        // user has not staked this LP_expiry before, no need to do anything
        if (exd.lastTimeUserStakeUpdated[user] == 0) {
            exd.lastTimeUserStakeUpdated[user] = block.timestamp;
            return;
        }

        uint256 _curEpoch = _getCurrentEpochId();
        uint256 _endEpoch = Math.min(numberOfEpochs, _curEpoch);

        // if _curEpoch<=numberOfEpochs
        // => the endEpoch hasn't ended yet (since endEpoch=curEpoch)
        bool _isEndEpochOver = (_curEpoch > numberOfEpochs);

        uint256 _startEpoch = _epochOfTimestamp(exd.lastTimeUserStakeUpdated[user]);

        /* Go through all epochs until now
        to update stakeUnitsForUser and availableRewardsForEpoch
        */
        for (uint256 epochId = _startEpoch; epochId <= _endEpoch; epochId++) {
            if (epochData[epochId].stakeUnitsForExpiry[expiry] == 0 && exd.totalStakeLP == 0) {
                /* in the extreme extreme case of zero staked LPs for this expiry even now,
                    => nothing to do from this epoch onwards */
                break;
            }

            // updating stakeUnits for users. The logic of this is similar to that of _updateStakeDataForExpiry
            // Please refer to _updateStakeDataForExpiry for more details
            epochData[epochId].stakeUnitsForUser[user][expiry] = epochData[epochId]
                .stakeUnitsForUser[user][expiry]
                .add(
                _calcUnitsStakeInEpoch(
                    exd.balances[user],
                    exd.lastTimeUserStakeUpdated[user],
                    epochId
                )
            );

            // all epochs prior to the endEpoch must have ended
            // if epochId == _endEpoch, we must check if the epoch has ended or not
            if (epochId == _endEpoch && !_isEndEpochOver) {
                // not ended yet, break
                break;
            }

            // Now this epoch has ended,let's distribute its reward to this user

            /*
            @Long: this can never happen because:
            * if exd.totalStakeLP==0 => will break by conditions above
            * else: exd.totalStakeLP!=0. Since every time the LP balance changes, this function will be called.
            => if startOfEpoch != now, the epoch must have at a positive amount of units in it.
            else startOfEpoch == now, but in this case it means that the epoch is not over yet, so !_isEndEpochOver == false
            */
            require(epochData[epochId].stakeUnitsForExpiry[expiry] != 0, "INTERNAL_ERROR");

            // calc the amount of rewards the user is eligible to receive from this epoch
            uint256 rewardsPerVestingEpoch =
                _calcAmountRewardsForUserInEpoch(expiry, user, epochId);

            // Now we distribute this rewards over the vestingEpochs starting from epochId + 1
            // to epochId + vestingEpochs
            for (uint256 i = epochId + 1; i <= epochId + vestingEpochs; i++) {
                epochData[i].availableRewardsForUser[user] = epochData[i].availableRewardsForUser[
                    user
                ]
                    .add(rewardsPerVestingEpoch);
            }
        }

        exd.lastTimeUserStakeUpdated[user] = block.timestamp;
    }

    // calc the amount of rewards the user is eligible to receive from this epoch
    // but we will return the amount per vestingEpoch instead
    function _calcAmountRewardsForUserInEpoch(
        uint256 expiry,
        address user,
        uint256 epochId
    ) internal view returns (uint256 rewardsPerVestingEpoch) {
        uint256 settingId =
            epochId >= latestSetting.firstEpochToApply
                ? latestSetting.id
                : epochData[epochId].settingId;

        uint256 rewardsForThisExpiry =
            epochData[epochId].totalRewards.mul(allocationSettings[settingId][expiry]).div(
                ALLOCATION_DENOMINATOR
            );

        rewardsPerVestingEpoch = rewardsForThisExpiry
            .mul(epochData[epochId].stakeUnitsForUser[user][expiry])
            .div(epochData[epochId].stakeUnitsForExpiry[expiry])
            .div(vestingEpochs);
    }

    /**
     * @notice returns the stakeUnits in the _epochId(th) epoch of an user if he stake from _startTime to now
     * @dev to calculate durationStakeThisEpoch:
     *   user will stake from _startTime -> _endTime, while the epoch last from _startTimeOfEpoch -> _endTimeOfEpoch
     *   => the stakeDuration of user will be min(_endTime,_endTimeOfEpoch) - max(_startTime,_startTimeOfEpoch)
     */
    function _calcUnitsStakeInEpoch(
        uint256 lpAmount,
        uint256 _startTime,
        uint256 _epochId
    ) internal view returns (uint256 stakeUnitsForUser) {
        uint256 _endTime = block.timestamp;

        uint256 _l = Math.max(_startTime, _startTimeOfEpoch(_epochId));
        uint256 _r = Math.min(_endTime, _endTimeOfEpoch(_epochId));
        uint256 durationStakeThisEpoch = _r.subMax0(_l);

        return lpAmount.mul(durationStakeThisEpoch);
    }

    /// @notice pull the lp token from users. This must be the only way to pull LP
    function _pullLpToken(
        address marketAddress,
        uint256 expiry,
        uint256 amount
    ) internal {
        _updatePendingRewards(expiry, msg.sender);
        _updateDueInterests(expiry, msg.sender);

        ExpiryData storage exd = expiryData[expiry];
        exd.balances[msg.sender] = exd.balances[msg.sender].add(amount);
        exd.totalStakeLP = exd.totalStakeLP.add(amount);

        IERC20(marketAddress).safeTransferFrom(msg.sender, expiryData[expiry].lpHolder, amount);
    }

    /// @notice push the lp token to users. This must be the only way to send LP out
    function _pushLpToken(uint256 expiry, uint256 amount) internal {
        _updatePendingRewards(expiry, msg.sender);
        _updateDueInterests(expiry, msg.sender);

        ExpiryData storage exd = expiryData[expiry];
        exd.balances[msg.sender] = exd.balances[msg.sender].sub(amount);
        exd.totalStakeLP = exd.totalStakeLP.sub(amount);

        IPendleLpHolder(expiryData[expiry].lpHolder).sendLp(msg.sender, amount);
    }

    /**
     * Very similar to the function in PendleMarketBase. Any major differences are likely to be bugs
       Please refer to it for more details
     */
    function _beforeTransferDueInterests(uint256 expiry, address user)
        internal
        returns (uint256 amountOut)
    {
        ExpiryData storage exd = expiryData[expiry];

        _updateDueInterests(expiry, user);

        amountOut = exd.dueInterests[user];
        exd.dueInterests[user] = 0;

        exd.lastNYield = exd.lastNYield.subMax0(amountOut);
    }

    /**
    @dev Must be the only way to transfer aToken/cToken out
    // Please refer to _safeTransfer of PendleForgeBase for the rationale of this function
    */
    function _safeTransferYieldToken(
        uint256 _expiry,
        address _user,
        uint256 _amount
    ) internal {
        if (_amount == 0) return;
        _amount = Math.min(
            _amount,
            IERC20(underlyingYieldToken).balanceOf(expiryData[_expiry].lpHolder)
        );
        IPendleLpHolder(expiryData[_expiry].lpHolder).sendInterests(_user, _amount);
    }

    /**
    @notice Calc the amount of rewards that the user can receive now.
    @dev To be called before any rewards is transferred out
    */
    function _beforeTransferPendingRewards(uint256 expiry, address user)
        internal
        returns (uint256 amountOut)
    {
        _updatePendingRewards(expiry, user);

        uint256 _lastEpoch = Math.min(_getCurrentEpochId(), numberOfEpochs + vestingEpochs);
        for (uint256 i = expiryData[expiry].lastEpochClaimed[user]; i <= _lastEpoch; i++) {
            if (epochData[i].availableRewardsForUser[user] > 0) {
                amountOut = amountOut.add(epochData[i].availableRewardsForUser[user]);
                epochData[i].availableRewardsForUser[user] = 0;
            }
        }

        expiryData[expiry].lastEpochClaimed[user] = _lastEpoch;
        emit PendleRewardsSettled(expiry, user, amountOut);
        return amountOut;
    }

    /**
    * Very similar to the function in PendleMarketBase. Any major differences are likely to be bugs
        Please refer to it for more details
    */
    function checkNeedUpdateParamL(uint256 expiry) internal returns (bool) {
        return _getIncomeIndexIncreaseRate(expiry) > data.interestUpdateRateDeltaForMarket();
    }

    /**
     * @dev all LP interests related functions are almost identical to markets' functions
     * Very similar to the function in PendleMarketBase. Any major differences are likely to be bugs
       Please refer to it for more details
     */
    function _updateParamL(uint256 expiry) internal {
        ExpiryData storage exd = expiryData[expiry];

        if (!checkNeedUpdateParamL(expiry)) return;

        IPendleLpHolder(exd.lpHolder).redeemLpInterests();

        uint256 currentNYield = IERC20(underlyingYieldToken).balanceOf(exd.lpHolder);
        (uint256 firstTerm, uint256 paramR) = _getFirstTermAndParamR(expiry, currentNYield);

        uint256 secondTerm;

        if (exd.totalStakeLP != 0) secondTerm = paramR.mul(MULTIPLIER).div(exd.totalStakeLP);

        // Update new states
        exd.paramL = firstTerm.add(secondTerm);
        exd.lastNYield = currentNYield;
    }

    /**
     * @notice Use to create a new lpHolder contract
     * Must only be called by Stake
     */
    function _addNewExpiry(uint256 expiry, address marketAddress)
        internal
        returns (address newLpHoldingContractAddress)
    {
        allExpiries.push(expiry);
        newLpHoldingContractAddress = address(
            new PendleLpHolder(
                address(governanceManager),
                marketAddress,
                address(router),
                underlyingYieldToken
            )
        );
        expiryData[expiry].lpHolder = newLpHoldingContractAddress;
        _afterAddingNewExpiry(expiry);
    }

    // 1-indexed
    function _getCurrentEpochId() internal view returns (uint256) {
        return _epochOfTimestamp(block.timestamp);
    }

    function _epochOfTimestamp(uint256 t) internal view returns (uint256) {
        if (t < startTime) return 0;
        return (t.sub(startTime)).div(epochDuration).add(1);
    }

    function _startTimeOfEpoch(uint256 t) internal view returns (uint256) {
        // epoch id starting from 1
        return startTime.add((t.sub(1)).mul(epochDuration));
    }

    function _endTimeOfEpoch(uint256 t) internal view returns (uint256) {
        // epoch id starting from 1
        return startTime.add(t.mul(epochDuration));
    }

    // There should be only PENDLE in here(LPs and yield tokens are kept in LP holders)
    // hence governance is allowed to withdraw anything other than PENDLE
    function _allowedToWithdraw(address _token) internal view override returns (bool allowed) {
        allowed = _token != pendleTokenAddress;
    }

    function _updateDueInterests(uint256 expiry, address user) internal virtual;

    function _getFirstTermAndParamR(uint256 expiry, uint256 currentNYield)
        internal
        virtual
        returns (uint256 firstTerm, uint256 paramR);

    function _afterAddingNewExpiry(uint256 expiry) internal virtual;

    function _getIncomeIndexIncreaseRate(uint256 expiry)
        internal
        virtual
        returns (uint256 increaseRate);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "../interfaces/IPendleLpHolder.sol";
import "../interfaces/IPendleRouter.sol";
import "../periphery/WithdrawableV2.sol";

contract PendleLpHolder is IPendleLpHolder, WithdrawableV2 {
    using SafeERC20 for IERC20;

    address private immutable pendleLiquidityMining;
    address public immutable override underlyingYieldToken;
    address public immutable override pendleMarket;
    address private immutable router;

    modifier onlyLiquidityMining() {
        require(msg.sender == pendleLiquidityMining, "ONLY_LIQUIDITY_MINING");
        _;
    }

    constructor(
        address _governanceManager,
        address _pendleMarket,
        address _router,
        address _underlyingYieldToken
    ) PermissionsV2(_governanceManager) {
        require(
            _pendleMarket != address(0) &&
                _router != address(0) &&
                _underlyingYieldToken != address(0),
            "ZERO_ADDRESS"
        );
        pendleMarket = _pendleMarket;
        router = _router;
        pendleLiquidityMining = msg.sender;
        underlyingYieldToken = _underlyingYieldToken;
    }

    function sendLp(address user, uint256 amount) external override onlyLiquidityMining {
        IERC20(pendleMarket).safeTransfer(user, amount);
    }

    function sendInterests(address user, uint256 amount) external override onlyLiquidityMining {
        IERC20(underlyingYieldToken).safeTransfer(user, amount);
    }

    function redeemLpInterests() external override onlyLiquidityMining {
        IPendleRouter(router).redeemLpInterests(pendleMarket, address(this));
    }

    // governance address is allowed to withdraw tokens except for
    // the yield token and the LPs staked here
    function _allowedToWithdraw(address _token) internal view override returns (bool allowed) {
        allowed = _token != underlyingYieldToken && _token != pendleMarket;
    }

    // Only liquidityMining contract can call this function
    // this will allow a spender to spend the whole balance of the specified token
    // the spender should ideally be a contract with logic for users to withdraw out their funds.
    function setUpEmergencyMode(address spender) external override onlyLiquidityMining {
        IERC20(underlyingYieldToken).safeApprove(spender, type(uint256).max);
        IERC20(pendleMarket).safeApprove(spender, type(uint256).max);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity 0.7.6;

struct TokenReserve {
    uint256 weight;
    uint256 balance;
}

struct PendingTransfer {
    uint256 amount;
    bool isOut;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "../core/PendleGovernanceManager.sol";
import "../interfaces/IPermissionsV2.sol";

abstract contract PermissionsV2 is IPermissionsV2 {
    PendleGovernanceManager public immutable override governanceManager;
    address internal initializer;

    constructor(address _governanceManager) {
        require(_governanceManager != address(0), "ZERO_ADDRESS");
        initializer = msg.sender;
        governanceManager = PendleGovernanceManager(_governanceManager);
    }

    modifier initialized() {
        require(initializer == address(0), "NOT_INITIALIZED");
        _;
    }

    modifier onlyGovernance() {
        require(msg.sender == _governance(), "ONLY_GOVERNANCE");
        _;
    }

    function _governance() internal view returns (address) {
        return governanceManager.governance();
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./PermissionsV2.sol";

abstract contract WithdrawableV2 is PermissionsV2 {
    using SafeERC20 for IERC20;

    event EtherWithdraw(uint256 amount, address sendTo);
    event TokenWithdraw(IERC20 token, uint256 amount, address sendTo);

    /**
     * @dev Allows governance to withdraw Ether in a Pendle contract
     *      in case of accidental ETH transfer into the contract.
     * @param amount The amount of Ether to withdraw.
     * @param sendTo The recipient address.
     */
    function withdrawEther(uint256 amount, address payable sendTo) external onlyGovernance {
        (bool success, ) = sendTo.call{value: amount}("");
        require(success, "WITHDRAW_FAILED");
        emit EtherWithdraw(amount, sendTo);
    }

    /**
     * @dev Allows governance to withdraw all IERC20 compatible tokens in a Pendle
     *      contract in case of accidental token transfer into the contract.
     * @param token IERC20 The address of the token contract.
     * @param amount The amount of IERC20 tokens to withdraw.
     * @param sendTo The recipient address.
     */
    function withdrawToken(
        IERC20 token,
        uint256 amount,
        address sendTo
    ) external onlyGovernance {
        require(_allowedToWithdraw(address(token)), "TOKEN_NOT_ALLOWED");
        token.safeTransfer(sendTo, amount);
        emit TokenWithdraw(token, amount, sendTo);
    }

    // must be overridden by the sub contracts, so we must consider explicitly
    // in each and every contract which tokens are allowed to be withdrawn
    function _allowedToWithdraw(address) internal view virtual returns (bool allowed);
}

{
  "compilationTarget": {
    "contracts/core/Generic/PendleGenericLiquidityMining.sol": "PendleGenericLiquidityMining"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}