// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return payable(msg.sender);
  }

  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

library DataTypes {
  /**
   * This exists specifically to maintain the `getReserveData()` interface, since the new, internal
   * `ReserveData` struct includes the reserve's `virtualUnderlyingBalance`.
   */
  struct ReserveDataLegacy {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 currentStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address stableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
  }

  struct ReserveData {
    //stores the reserve configuration
    ReserveConfigurationMap configuration;
    //the liquidity index. Expressed in ray
    uint128 liquidityIndex;
    //the current supply rate. Expressed in ray
    uint128 currentLiquidityRate;
    //variable borrow index. Expressed in ray
    uint128 variableBorrowIndex;
    //the current variable borrow rate. Expressed in ray
    uint128 currentVariableBorrowRate;
    // DEPRECATED on v3.2.0
    uint128 __deprecatedStableBorrowRate;
    //timestamp of last update
    uint40 lastUpdateTimestamp;
    //the id of the reserve. Represents the position in the list of the active reserves
    uint16 id;
    //timestamp until when liquidations are not allowed on the reserve, if set to past liquidations will be allowed
    uint40 liquidationGracePeriodUntil;
    //aToken address
    address aTokenAddress;
    // DEPRECATED on v3.2.0
    address __deprecatedStableDebtTokenAddress;
    //variableDebtToken address
    address variableDebtTokenAddress;
    //address of the interest rate strategy
    address interestRateStrategyAddress;
    //the current treasury balance, scaled
    uint128 accruedToTreasury;
    //the outstanding unbacked aTokens minted through the bridging feature
    uint128 unbacked;
    //the outstanding debt borrowed against this asset in isolation mode
    uint128 isolationModeTotalDebt;
    //the amount of underlying accounted for by the protocol
    uint128 virtualUnderlyingBalance;
  }

  struct ReserveConfigurationMap {
    //bit 0-15: LTV
    //bit 16-31: Liq. threshold
    //bit 32-47: Liq. bonus
    //bit 48-55: Decimals
    //bit 56: reserve is active
    //bit 57: reserve is frozen
    //bit 58: borrowing is enabled
    //bit 59: DEPRECATED: stable rate borrowing enabled
    //bit 60: asset is paused
    //bit 61: borrowing in isolation mode is enabled
    //bit 62: siloed borrowing enabled
    //bit 63: flashloaning enabled
    //bit 64-79: reserve factor
    //bit 80-115: borrow cap in whole tokens, borrowCap == 0 => no cap
    //bit 116-151: supply cap in whole tokens, supplyCap == 0 => no cap
    //bit 152-167: liquidation protocol fee
    //bit 168-175: DEPRECATED: eMode category
    //bit 176-211: unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
    //bit 212-251: debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
    //bit 252: virtual accounting is enabled for the reserve
    //bit 253-255 unused

    uint256 data;
  }

  struct UserConfigurationMap {
    /**
     * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
     * The first bit indicates if an asset is used as collateral by the user, the second whether an
     * asset is borrowed by the user.
     */
    uint256 data;
  }

  // DEPRECATED: kept for backwards compatibility, might be removed in a future version
  struct EModeCategoryLegacy {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    // DEPRECATED
    address priceSource;
    string label;
  }

  struct CollateralConfig {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
  }

  struct EModeCategoryBaseConfiguration {
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    string label;
  }

  struct EModeCategory {
    // each eMode category has a custom ltv and liquidation threshold
    uint16 ltv;
    uint16 liquidationThreshold;
    uint16 liquidationBonus;
    uint128 collateralBitmap;
    string label;
    uint128 borrowableBitmap;
  }

  enum InterestRateMode {
    NONE,
    __DEPRECATED,
    VARIABLE
  }

  struct ReserveCache {
    uint256 currScaledVariableDebt;
    uint256 nextScaledVariableDebt;
    uint256 currLiquidityIndex;
    uint256 nextLiquidityIndex;
    uint256 currVariableBorrowIndex;
    uint256 nextVariableBorrowIndex;
    uint256 currLiquidityRate;
    uint256 currVariableBorrowRate;
    uint256 reserveFactor;
    ReserveConfigurationMap reserveConfiguration;
    address aTokenAddress;
    address variableDebtTokenAddress;
    uint40 reserveLastUpdateTimestamp;
  }

  struct ExecuteLiquidationCallParams {
    uint256 reservesCount;
    uint256 debtToCover;
    address collateralAsset;
    address debtAsset;
    address user;
    bool receiveAToken;
    address priceOracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteSupplyParams {
    address asset;
    uint256 amount;
    address onBehalfOf;
    uint16 referralCode;
  }

  struct ExecuteBorrowParams {
    address asset;
    address user;
    address onBehalfOf;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint16 referralCode;
    bool releaseUnderlying;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
  }

  struct ExecuteRepayParams {
    address asset;
    uint256 amount;
    InterestRateMode interestRateMode;
    address onBehalfOf;
    bool useATokens;
  }

  struct ExecuteWithdrawParams {
    address asset;
    uint256 amount;
    address to;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ExecuteSetUserEModeParams {
    uint256 reservesCount;
    address oracle;
    uint8 categoryId;
  }

  struct FinalizeTransferParams {
    address asset;
    address from;
    address to;
    uint256 amount;
    uint256 balanceFromBefore;
    uint256 balanceToBefore;
    uint256 reservesCount;
    address oracle;
    uint8 fromEModeCategory;
  }

  struct FlashloanParams {
    address receiverAddress;
    address[] assets;
    uint256[] amounts;
    uint256[] interestRateModes;
    address onBehalfOf;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
    uint256 reservesCount;
    address addressesProvider;
    address pool;
    uint8 userEModeCategory;
    bool isAuthorizedFlashBorrower;
  }

  struct FlashloanSimpleParams {
    address receiverAddress;
    address asset;
    uint256 amount;
    bytes params;
    uint16 referralCode;
    uint256 flashLoanPremiumToProtocol;
    uint256 flashLoanPremiumTotal;
  }

  struct FlashLoanRepaymentParams {
    uint256 amount;
    uint256 totalPremium;
    uint256 flashLoanPremiumToProtocol;
    address asset;
    address receiverAddress;
    uint16 referralCode;
  }

  struct CalculateUserAccountDataParams {
    UserConfigurationMap userConfig;
    uint256 reservesCount;
    address user;
    address oracle;
    uint8 userEModeCategory;
  }

  struct ValidateBorrowParams {
    ReserveCache reserveCache;
    UserConfigurationMap userConfig;
    address asset;
    address userAddress;
    uint256 amount;
    InterestRateMode interestRateMode;
    uint256 reservesCount;
    address oracle;
    uint8 userEModeCategory;
    address priceOracleSentinel;
    bool isolationModeActive;
    address isolationModeCollateralAddress;
    uint256 isolationModeDebtCeiling;
  }

  struct ValidateLiquidationCallParams {
    ReserveCache debtReserveCache;
    uint256 totalDebt;
    uint256 healthFactor;
    address priceOracleSentinel;
  }

  struct CalculateInterestRatesParams {
    uint256 unbacked;
    uint256 liquidityAdded;
    uint256 liquidityTaken;
    uint256 totalDebt;
    uint256 reserveFactor;
    address reserve;
    bool usingVirtualBalance;
    uint256 virtualUnderlyingBalance;
  }

  struct InitReserveParams {
    address asset;
    address aTokenAddress;
    address variableDebtAddress;
    address interestRateStrategyAddress;
    uint16 reservesCount;
    uint16 maxNumberReserves;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title Errors library
 * @author Aave
 * @notice Defines the error messages emitted by the different contracts of the Aave protocol
 */
library Errors {
  string public constant CALLER_NOT_POOL_ADMIN = '1'; // 'The caller of the function is not a pool admin'
  string public constant CALLER_NOT_EMERGENCY_ADMIN = '2'; // 'The caller of the function is not an emergency admin'
  string public constant CALLER_NOT_POOL_OR_EMERGENCY_ADMIN = '3'; // 'The caller of the function is not a pool or emergency admin'
  string public constant CALLER_NOT_RISK_OR_POOL_ADMIN = '4'; // 'The caller of the function is not a risk or pool admin'
  string public constant CALLER_NOT_ASSET_LISTING_OR_POOL_ADMIN = '5'; // 'The caller of the function is not an asset listing or pool admin'
  string public constant CALLER_NOT_BRIDGE = '6'; // 'The caller of the function is not a bridge'
  string public constant ADDRESSES_PROVIDER_NOT_REGISTERED = '7'; // 'Pool addresses provider is not registered'
  string public constant INVALID_ADDRESSES_PROVIDER_ID = '8'; // 'Invalid id for the pool addresses provider'
  string public constant NOT_CONTRACT = '9'; // 'Address is not a contract'
  string public constant CALLER_NOT_POOL_CONFIGURATOR = '10'; // 'The caller of the function is not the pool configurator'
  string public constant CALLER_NOT_ATOKEN = '11'; // 'The caller of the function is not an AToken'
  string public constant INVALID_ADDRESSES_PROVIDER = '12'; // 'The address of the pool addresses provider is invalid'
  string public constant INVALID_FLASHLOAN_EXECUTOR_RETURN = '13'; // 'Invalid return value of the flashloan executor function'
  string public constant RESERVE_ALREADY_ADDED = '14'; // 'Reserve has already been added to reserve list'
  string public constant NO_MORE_RESERVES_ALLOWED = '15'; // 'Maximum amount of reserves in the pool reached'
  string public constant EMODE_CATEGORY_RESERVED = '16'; // 'Zero eMode category is reserved for volatile heterogeneous assets'
  string public constant INVALID_EMODE_CATEGORY_ASSIGNMENT = '17'; // 'Invalid eMode category assignment to asset'
  string public constant RESERVE_LIQUIDITY_NOT_ZERO = '18'; // 'The liquidity of the reserve needs to be 0'
  string public constant FLASHLOAN_PREMIUM_INVALID = '19'; // 'Invalid flashloan premium'
  string public constant INVALID_RESERVE_PARAMS = '20'; // 'Invalid risk parameters for the reserve'
  string public constant INVALID_EMODE_CATEGORY_PARAMS = '21'; // 'Invalid risk parameters for the eMode category'
  string public constant BRIDGE_PROTOCOL_FEE_INVALID = '22'; // 'Invalid bridge protocol fee'
  string public constant CALLER_MUST_BE_POOL = '23'; // 'The caller of this function must be a pool'
  string public constant INVALID_MINT_AMOUNT = '24'; // 'Invalid amount to mint'
  string public constant INVALID_BURN_AMOUNT = '25'; // 'Invalid amount to burn'
  string public constant INVALID_AMOUNT = '26'; // 'Amount must be greater than 0'
  string public constant RESERVE_INACTIVE = '27'; // 'Action requires an active reserve'
  string public constant RESERVE_FROZEN = '28'; // 'Action cannot be performed because the reserve is frozen'
  string public constant RESERVE_PAUSED = '29'; // 'Action cannot be performed because the reserve is paused'
  string public constant BORROWING_NOT_ENABLED = '30'; // 'Borrowing is not enabled'
  string public constant NOT_ENOUGH_AVAILABLE_USER_BALANCE = '32'; // 'User cannot withdraw more than the available balance'
  string public constant INVALID_INTEREST_RATE_MODE_SELECTED = '33'; // 'Invalid interest rate mode selected'
  string public constant COLLATERAL_BALANCE_IS_ZERO = '34'; // 'The collateral balance is 0'
  string public constant HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '35'; // 'Health factor is lesser than the liquidation threshold'
  string public constant COLLATERAL_CANNOT_COVER_NEW_BORROW = '36'; // 'There is not enough collateral to cover a new borrow'
  string public constant COLLATERAL_SAME_AS_BORROWING_CURRENCY = '37'; // 'Collateral is (mostly) the same currency that is being borrowed'
  string public constant NO_DEBT_OF_SELECTED_TYPE = '39'; // 'For repayment of a specific type of debt, the user needs to have debt that type'
  string public constant NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '40'; // 'To repay on behalf of a user an explicit amount to repay is needed'
  string public constant NO_OUTSTANDING_VARIABLE_DEBT = '42'; // 'User does not have outstanding variable rate debt on this reserve'
  string public constant UNDERLYING_BALANCE_ZERO = '43'; // 'The underlying balance needs to be greater than 0'
  string public constant INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '44'; // 'Interest rate rebalance conditions were not met'
  string public constant HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '45'; // 'Health factor is not below the threshold'
  string public constant COLLATERAL_CANNOT_BE_LIQUIDATED = '46'; // 'The collateral chosen cannot be liquidated'
  string public constant SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '47'; // 'User did not borrow the specified currency'
  string public constant INCONSISTENT_FLASHLOAN_PARAMS = '49'; // 'Inconsistent flashloan parameters'
  string public constant BORROW_CAP_EXCEEDED = '50'; // 'Borrow cap is exceeded'
  string public constant SUPPLY_CAP_EXCEEDED = '51'; // 'Supply cap is exceeded'
  string public constant UNBACKED_MINT_CAP_EXCEEDED = '52'; // 'Unbacked mint cap is exceeded'
  string public constant DEBT_CEILING_EXCEEDED = '53'; // 'Debt ceiling is exceeded'
  string public constant UNDERLYING_CLAIMABLE_RIGHTS_NOT_ZERO = '54'; // 'Claimable rights over underlying not zero (aToken supply or accruedToTreasury)'
  string public constant VARIABLE_DEBT_SUPPLY_NOT_ZERO = '56'; // 'Variable debt supply is not zero'
  string public constant LTV_VALIDATION_FAILED = '57'; // 'Ltv validation failed'
  string public constant INCONSISTENT_EMODE_CATEGORY = '58'; // 'Inconsistent eMode category'
  string public constant PRICE_ORACLE_SENTINEL_CHECK_FAILED = '59'; // 'Price oracle sentinel validation failed'
  string public constant ASSET_NOT_BORROWABLE_IN_ISOLATION = '60'; // 'Asset is not borrowable in isolation mode'
  string public constant RESERVE_ALREADY_INITIALIZED = '61'; // 'Reserve has already been initialized'
  string public constant USER_IN_ISOLATION_MODE_OR_LTV_ZERO = '62'; // 'User is in isolation mode or ltv is zero'
  string public constant INVALID_LTV = '63'; // 'Invalid ltv parameter for the reserve'
  string public constant INVALID_LIQ_THRESHOLD = '64'; // 'Invalid liquidity threshold parameter for the reserve'
  string public constant INVALID_LIQ_BONUS = '65'; // 'Invalid liquidity bonus parameter for the reserve'
  string public constant INVALID_DECIMALS = '66'; // 'Invalid decimals parameter of the underlying asset of the reserve'
  string public constant INVALID_RESERVE_FACTOR = '67'; // 'Invalid reserve factor parameter for the reserve'
  string public constant INVALID_BORROW_CAP = '68'; // 'Invalid borrow cap for the reserve'
  string public constant INVALID_SUPPLY_CAP = '69'; // 'Invalid supply cap for the reserve'
  string public constant INVALID_LIQUIDATION_PROTOCOL_FEE = '70'; // 'Invalid liquidation protocol fee for the reserve'
  string public constant INVALID_EMODE_CATEGORY = '71'; // 'Invalid eMode category for the reserve'
  string public constant INVALID_UNBACKED_MINT_CAP = '72'; // 'Invalid unbacked mint cap for the reserve'
  string public constant INVALID_DEBT_CEILING = '73'; // 'Invalid debt ceiling for the reserve
  string public constant INVALID_RESERVE_INDEX = '74'; // 'Invalid reserve index'
  string public constant ACL_ADMIN_CANNOT_BE_ZERO = '75'; // 'ACL admin cannot be set to the zero address'
  string public constant INCONSISTENT_PARAMS_LENGTH = '76'; // 'Array parameters that should be equal length are not'
  string public constant ZERO_ADDRESS_NOT_VALID = '77'; // 'Zero address not valid'
  string public constant INVALID_EXPIRATION = '78'; // 'Invalid expiration'
  string public constant INVALID_SIGNATURE = '79'; // 'Invalid signature'
  string public constant OPERATION_NOT_SUPPORTED = '80'; // 'Operation not supported'
  string public constant DEBT_CEILING_NOT_ZERO = '81'; // 'Debt ceiling is not zero'
  string public constant ASSET_NOT_LISTED = '82'; // 'Asset is not listed'
  string public constant INVALID_OPTIMAL_USAGE_RATIO = '83'; // 'Invalid optimal usage ratio'
  string public constant UNDERLYING_CANNOT_BE_RESCUED = '85'; // 'The underlying asset cannot be rescued'
  string public constant ADDRESSES_PROVIDER_ALREADY_ADDED = '86'; // 'Reserve has already been added to reserve list'
  string public constant POOL_ADDRESSES_DO_NOT_MATCH = '87'; // 'The token implementation pool address and the pool address provided by the initializing pool do not match'
  string public constant SILOED_BORROWING_VIOLATION = '89'; // 'User is trying to borrow multiple assets including a siloed one'
  string public constant RESERVE_DEBT_NOT_ZERO = '90'; // the total debt of the reserve needs to be 0
  string public constant FLASHLOAN_DISABLED = '91'; // FlashLoaning for this asset is disabled
  string public constant INVALID_MAX_RATE = '92'; // The expect maximum borrow rate is invalid
  string public constant WITHDRAW_TO_ATOKEN = '93'; // Withdrawing to the aToken is not allowed
  string public constant SUPPLY_TO_ATOKEN = '94'; // Supplying to the aToken is not allowed
  string public constant SLOPE_2_MUST_BE_GTE_SLOPE_1 = '95'; // Variable interest rate slope 2 can not be lower than slope 1
  string public constant CALLER_NOT_RISK_OR_POOL_OR_EMERGENCY_ADMIN = '96'; // 'The caller of the function is not a risk, pool or emergency admin'
  string public constant LIQUIDATION_GRACE_SENTINEL_CHECK_FAILED = '97'; // 'Liquidation grace sentinel validation failed'
  string public constant INVALID_GRACE_PERIOD = '98'; // Grace period above a valid range
  string public constant INVALID_FREEZE_STATE = '99'; // Reserve is already in the passed freeze state
  string public constant NOT_BORROWABLE_IN_EMODE = '100'; // Asset not borrowable in eMode
}

// SPDX-License-Identifier: LGPL-3.0-or-later
pragma solidity ^0.8.10;

import {IERC20} from '../../openzeppelin/contracts/IERC20.sol';

/// @title Gnosis Protocol v2 Safe ERC20 Transfer Library
/// @author Gnosis Developers
/// @dev Gas-efficient version of Openzeppelin's SafeERC20 contract.
library GPv2SafeERC20 {
  /// @dev Wrapper around a call to the ERC20 function `transfer` that reverts
  /// also when the token returns `false`.
  function safeTransfer(IERC20 token, address to, uint256 value) internal {
    bytes4 selector_ = token.transfer.selector;

    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), value)

      if iszero(call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }

    require(getLastTransferResult(token), 'GPv2: failed transfer');
  }

  /// @dev Wrapper around a call to the ERC20 function `transferFrom` that
  /// reverts also when the token returns `false`.
  function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
    bytes4 selector_ = token.transferFrom.selector;

    // solhint-disable-next-line no-inline-assembly
    assembly {
      let freeMemoryPointer := mload(0x40)
      mstore(freeMemoryPointer, selector_)
      mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff))
      mstore(add(freeMemoryPointer, 68), value)

      if iszero(call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)) {
        returndatacopy(0, 0, returndatasize())
        revert(0, returndatasize())
      }
    }

    require(getLastTransferResult(token), 'GPv2: failed transferFrom');
  }

  /// @dev Verifies that the last return was a successful `transfer*` call.
  /// This is done by checking that the return data is either empty, or
  /// is a valid ABI encoded boolean.
  function getLastTransferResult(IERC20 token) private view returns (bool success) {
    // NOTE: Inspecting previous return data requires assembly. Note that
    // we write the return data to memory 0 in the case where the return
    // data size is 32, this is OK since the first 64 bytes of memory are
    // reserved by Solidy as a scratch space that can be used within
    // assembly blocks.
    // <https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html>
    // solhint-disable-next-line no-inline-assembly
    assembly {
      /// @dev Revert with an ABI encoded Solidity error with a message
      /// that fits into 32-bytes.
      ///
      /// An ABI encoded Solidity error has the following memory layout:
      ///
      /// ------------+----------------------------------
      ///  byte range | value
      /// ------------+----------------------------------
      ///  0x00..0x04 |        selector("Error(string)")
      ///  0x04..0x24 |      string offset (always 0x20)
      ///  0x24..0x44 |                    string length
      ///  0x44..0x64 | string value, padded to 32-bytes
      function revertWithMessage(length, message) {
        mstore(0x00, '\x08\xc3\x79\xa0')
        mstore(0x04, 0x20)
        mstore(0x24, length)
        mstore(0x44, message)
        revert(0x00, 0x64)
      }

      switch returndatasize()
      // Non-standard ERC20 transfer without return.
      case 0 {
        // NOTE: When the return data size is 0, verify that there
        // is code at the address. This is done in order to maintain
        // compatibility with Solidity calling conventions.
        // <https://docs.soliditylang.org/en/v0.7.6/control-structures.html#external-function-calls>
        if iszero(extcodesize(token)) {
          revertWithMessage(20, 'GPv2: not a contract')
        }

        success := 1
      }
      // Standard ERC20 transfer returning boolean success value.
      case 32 {
        returndatacopy(0, 0, returndatasize())

        // NOTE: For ABI encoding v1, any non-zero value is accepted
        // as `true` for a boolean. In order to stay compatible with
        // OpenZeppelin's `SafeERC20` library which is known to work
        // with the existing ERC20 implementation we care about,
        // make sure we return success for any non-zero return value
        // from the `transfer*` call.
        success := iszero(iszero(mload(0)))
      }
      default {
        revertWithMessage(31, 'GPv2: malformed transfer result')
      }
    }
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';

/**
 * @title IAToken
 * @author Aave
 * @notice Defines the basic interface for an AToken.
 */
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
  /**
   * @dev Emitted during the transfer action
   * @param from The user whose tokens are being transferred
   * @param to The recipient
   * @param value The scaled amount being transferred
   * @param index The next liquidity index of the reserve
   */
  event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);

  /**
   * @notice Mints `amount` aTokens to `user`
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted aTokens
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   * @return `true` if the the previous balance of the user was 0
   */
  function mint(
    address caller,
    address onBehalfOf,
    uint256 amount,
    uint256 index
  ) external returns (bool);

  /**
   * @notice Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
   * @dev In some instances, the mint event could be emitted from a burn transaction
   * if the amount to burn is less than the interest that the user accrued
   * @param from The address from which the aTokens will be burned
   * @param receiverOfUnderlying The address that will receive the underlying
   * @param amount The amount being burned
   * @param index The next liquidity index of the reserve
   */
  function burn(address from, address receiverOfUnderlying, uint256 amount, uint256 index) external;

  /**
   * @notice Mints aTokens to the reserve treasury
   * @param amount The amount of tokens getting minted
   * @param index The next liquidity index of the reserve
   */
  function mintToTreasury(uint256 amount, uint256 index) external;

  /**
   * @notice Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
   * @param from The address getting liquidated, current owner of the aTokens
   * @param to The recipient
   * @param value The amount of tokens getting transferred
   */
  function transferOnLiquidation(address from, address to, uint256 value) external;

  /**
   * @notice Transfers the underlying asset to `target`.
   * @dev Used by the Pool to transfer assets in borrow(), withdraw() and flashLoan()
   * @param target The recipient of the underlying
   * @param amount The amount getting transferred
   */
  function transferUnderlyingTo(address target, uint256 amount) external;

  /**
   * @notice Handles the underlying received by the aToken after the transfer has been completed.
   * @dev The default implementation is empty as with standard ERC20 tokens, nothing needs to be done after the
   * transfer is concluded. However in the future there may be aTokens that allow for example to stake the underlying
   * to receive LM rewards. In that case, `handleRepayment()` would perform the staking of the underlying asset.
   * @param user The user executing the repayment
   * @param onBehalfOf The address of the user who will get his debt reduced/removed
   * @param amount The amount getting repaid
   */
  function handleRepayment(address user, address onBehalfOf, uint256 amount) external;

  /**
   * @notice Allow passing a signed message to approve spending
   * @dev implements the permit function as for
   * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
   * @param owner The owner of the funds
   * @param spender The spender
   * @param value The amount
   * @param deadline The deadline timestamp, type(uint256).max for max deadline
   * @param v Signature param
   * @param s Signature param
   * @param r Signature param
   */
  function permit(
    address owner,
    address spender,
    uint256 value,
    uint256 deadline,
    uint8 v,
    bytes32 r,
    bytes32 s
  ) external;

  /**
   * @notice Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @return The address of the underlying asset
   */
  function UNDERLYING_ASSET_ADDRESS() external view returns (address);

  /**
   * @notice Returns the address of the Aave treasury, receiving the fees on this aToken.
   * @return Address of the Aave treasury
   */
  function RESERVE_TREASURY_ADDRESS() external view returns (address);

  /**
   * @notice Get the domain separator for the token
   * @dev Return cached value if chainId matches cache, otherwise recomputes separator
   * @return The domain separator of the token at current chain
   */
  function DOMAIN_SEPARATOR() external view returns (bytes32);

  /**
   * @notice Returns the nonce for owner.
   * @param owner The address of the owner
   * @return The nonce of the owner
   */
  function nonces(address owner) external view returns (uint256);

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IAaveIncentivesController
 * @author Aave
 * @notice Defines the basic interface for an Aave Incentives Controller.
 * @dev It only contains one single function, needed as a hook on aToken and debtToken transfers.
 */
interface IAaveIncentivesController {
  /**
   * @dev Called by the corresponding asset on transfer hook in order to update the rewards distribution.
   * @dev The units of `totalSupply` and `userBalance` should be the same.
   * @param user The address of the user whose asset balance has changed
   * @param totalSupply The total supply of the asset prior to user balance change
   * @param userBalance The previous user balance prior to balance change
   */
  function handleAction(address user, uint256 totalSupply, uint256 userBalance) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
import {IPool} from './IPool.sol';

/**
 * @title IInitializableAToken
 * @author Aave
 * @notice Interface for the initialize function on AToken
 */
interface IInitializableAToken {
  /**
   * @dev Emitted when an aToken is initialized
   * @param underlyingAsset The address of the underlying asset
   * @param pool The address of the associated pool
   * @param treasury The address of the treasury
   * @param incentivesController The address of the incentives controller for this aToken
   * @param aTokenDecimals The decimals of the underlying
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  event Initialized(
    address indexed underlyingAsset,
    address indexed pool,
    address treasury,
    address incentivesController,
    uint8 aTokenDecimals,
    string aTokenName,
    string aTokenSymbol,
    bytes params
  );

  /**
   * @notice Initializes the aToken
   * @param pool The pool contract that is initializing this contract
   * @param treasury The address of the Aave treasury, receiving the fees on this aToken
   * @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
   * @param incentivesController The smart contract managing potential incentives distribution
   * @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
   * @param aTokenName The name of the aToken
   * @param aTokenSymbol The symbol of the aToken
   * @param params A set of encoded parameters for additional initialization
   */
  function initialize(
    IPool pool,
    address treasury,
    address underlyingAsset,
    IAaveIncentivesController incentivesController,
    uint8 aTokenDecimals,
    string calldata aTokenName,
    string calldata aTokenSymbol,
    bytes calldata params
  ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from './IPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
  /**
   * @dev Emitted on mintUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
   * @param amount The amount of supplied assets
   * @param referralCode The referral code used
   */
  event MintUnbacked(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on backUnbacked()
   * @param reserve The address of the underlying asset of the reserve
   * @param backer The address paying for the backing
   * @param amount The amount added as backing
   * @param fee The amount paid in fees
   */
  event BackUnbacked(address indexed reserve, address indexed backer, uint256 amount, uint256 fee);

  /**
   * @dev Emitted on supply()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address initiating the supply
   * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
   * @param amount The amount supplied
   * @param referralCode The referral code used
   */
  event Supply(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on withdraw()
   * @param reserve The address of the underlying asset being withdrawn
   * @param user The address initiating the withdrawal, owner of aTokens
   * @param to The address that will receive the underlying
   * @param amount The amount to be withdrawn
   */
  event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);

  /**
   * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
   * @param reserve The address of the underlying asset being borrowed
   * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
   * initiator of the transaction on flashLoan()
   * @param onBehalfOf The address that will be getting the debt
   * @param amount The amount borrowed out
   * @param interestRateMode The rate mode: 2 for Variable, 1 is deprecated (changed on v3.2.0)
   * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
   * @param referralCode The referral code used
   */
  event Borrow(
    address indexed reserve,
    address user,
    address indexed onBehalfOf,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 borrowRate,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted on repay()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The beneficiary of the repayment, getting his debt reduced
   * @param repayer The address of the user initiating the repay(), providing the funds
   * @param amount The amount repaid
   * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
   */
  event Repay(
    address indexed reserve,
    address indexed user,
    address indexed repayer,
    uint256 amount,
    bool useATokens
  );

  /**
   * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
   * @param asset The address of the underlying asset of the reserve
   * @param totalDebt The total isolation mode debt for the reserve
   */
  event IsolationModeTotalDebtUpdated(address indexed asset, uint256 totalDebt);

  /**
   * @dev Emitted when the user selects a certain asset category for eMode
   * @param user The address of the user
   * @param categoryId The category id
   */
  event UserEModeSet(address indexed user, uint8 categoryId);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on setUserUseReserveAsCollateral()
   * @param reserve The address of the underlying asset of the reserve
   * @param user The address of the user enabling the usage as collateral
   */
  event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);

  /**
   * @dev Emitted on flashLoan()
   * @param target The address of the flash loan receiver contract
   * @param initiator The address initiating the flash loan
   * @param asset The address of the asset being flash borrowed
   * @param amount The amount flash borrowed
   * @param interestRateMode The flashloan mode: 0 for regular flashloan,
   *        1 for Stable (Deprecated on v3.2.0), 2 for Variable
   * @param premium The fee flash borrowed
   * @param referralCode The referral code used
   */
  event FlashLoan(
    address indexed target,
    address initiator,
    address indexed asset,
    uint256 amount,
    DataTypes.InterestRateMode interestRateMode,
    uint256 premium,
    uint16 indexed referralCode
  );

  /**
   * @dev Emitted when a borrower is liquidated.
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
   * @param liquidator The address of the liquidator
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  event LiquidationCall(
    address indexed collateralAsset,
    address indexed debtAsset,
    address indexed user,
    uint256 debtToCover,
    uint256 liquidatedCollateralAmount,
    address liquidator,
    bool receiveAToken
  );

  /**
   * @dev Emitted when the state of a reserve is updated.
   * @param reserve The address of the underlying asset of the reserve
   * @param liquidityRate The next liquidity rate
   * @param stableBorrowRate The next stable borrow rate @note deprecated on v3.2.0
   * @param variableBorrowRate The next variable borrow rate
   * @param liquidityIndex The next liquidity index
   * @param variableBorrowIndex The next variable borrow index
   */
  event ReserveDataUpdated(
    address indexed reserve,
    uint256 liquidityRate,
    uint256 stableBorrowRate,
    uint256 variableBorrowRate,
    uint256 liquidityIndex,
    uint256 variableBorrowIndex
  );

  /**
   * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
   * @param reserve The address of the reserve
   * @param amountMinted The amount minted to the treasury
   */
  event MintedToTreasury(address indexed reserve, uint256 amountMinted);

  /**
   * @notice Mints an `amount` of aTokens to the `onBehalfOf`
   * @param asset The address of the underlying asset to mint
   * @param amount The amount to mint
   * @param onBehalfOf The address that will receive the aTokens
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function mintUnbacked(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode
  ) external;

  /**
   * @notice Back the current unbacked underlying with `amount` and pay `fee`.
   * @param asset The address of the underlying asset to back
   * @param amount The amount to back
   * @param fee The amount paid in fees
   * @return The backed amount
   */
  function backUnbacked(address asset, uint256 amount, uint256 fee) external returns (uint256);

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function supply(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Supply with transfer approval of asset to be supplied done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param deadline The deadline timestamp that the permit is valid
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   */
  function supplyWithPermit(
    address asset,
    uint256 amount,
    address onBehalfOf,
    uint16 referralCode,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;

  /**
   * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
   * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
   * @param asset The address of the underlying asset to withdraw
   * @param amount The underlying amount to be withdrawn
   *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
   * @param to The address that will receive the underlying, same as msg.sender if the user
   *   wants to receive it on his own wallet, or a different address if the beneficiary is a
   *   different wallet
   * @return The final amount withdrawn
   */
  function withdraw(address asset, uint256 amount, address to) external returns (uint256);

  /**
   * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
   * already supplied enough collateral, or he was given enough allowance by a credit delegator on the VariableDebtToken
   * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
   *   and 100 variable debt tokens
   * @param asset The address of the underlying asset to borrow
   * @param amount The amount to be borrowed
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
   * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
   * if he has been given credit delegation allowance
   */
  function borrow(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    uint16 referralCode,
    address onBehalfOf
  ) external;

  /**
   * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
   * - E.g. User repays 100 USDC, burning 100 variable debt tokens of the `onBehalfOf` address
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @return The final amount repaid
   */
  function repay(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf
  ) external returns (uint256);

  /**
   * @notice Repay with transfer approval of asset to be repaid done via permit function
   * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode 2 for Variable, 1 is deprecated on v3.2.0
   * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
   * user calling the function if he wants to reduce/remove his own debt, or the address of any other
   * other borrower whose debt should be removed
   * @param deadline The deadline timestamp that the permit is valid
   * @param permitV The V parameter of ERC712 permit sig
   * @param permitR The R parameter of ERC712 permit sig
   * @param permitS The S parameter of ERC712 permit sig
   * @return The final amount repaid
   */
  function repayWithPermit(
    address asset,
    uint256 amount,
    uint256 interestRateMode,
    address onBehalfOf,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external returns (uint256);

  /**
   * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
   * equivalent debt tokens
   * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable debt tokens
   * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
   * balance is not enough to cover the whole debt
   * @param asset The address of the borrowed underlying asset previously borrowed
   * @param amount The amount to repay
   * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
   * @param interestRateMode DEPRECATED in v3.2.0
   * @return The final amount repaid
   */
  function repayWithATokens(
    address asset,
    uint256 amount,
    uint256 interestRateMode
  ) external returns (uint256);

  /**
   * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
   * @param asset The address of the underlying asset supplied
   * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
   */
  function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;

  /**
   * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
   * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
   *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
   * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
   * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
   * @param user The address of the borrower getting liquidated
   * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
   * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
   * to receive the underlying collateral asset directly
   */
  function liquidationCall(
    address collateralAsset,
    address debtAsset,
    address user,
    uint256 debtToCover,
    bool receiveAToken
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
   * @param assets The addresses of the assets being flash-borrowed
   * @param amounts The amounts of the assets being flash-borrowed
   * @param interestRateModes Types of the debt to open if the flash loan is not returned:
   *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
   *   1 -> Deprecated on v3.2.0
   *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
   * @param onBehalfOf The address  that will receive the debt in the case of using 2 on `modes`
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoan(
    address receiverAddress,
    address[] calldata assets,
    uint256[] calldata amounts,
    uint256[] calldata interestRateModes,
    address onBehalfOf,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
   * as long as the amount taken plus a fee is returned.
   * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
   * into consideration. For further details please visit https://docs.aave.com/developers/
   * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
   * @param asset The address of the asset being flash-borrowed
   * @param amount The amount of the asset being flash-borrowed
   * @param params Variadic packed params to pass to the receiver as extra information
   * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function flashLoanSimple(
    address receiverAddress,
    address asset,
    uint256 amount,
    bytes calldata params,
    uint16 referralCode
  ) external;

  /**
   * @notice Returns the user account data across all the reserves
   * @param user The address of the user
   * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
   * @return totalDebtBase The total debt of the user in the base currency used by the price feed
   * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
   * @return currentLiquidationThreshold The liquidation threshold of the user
   * @return ltv The loan to value of The user
   * @return healthFactor The current health factor of the user
   */
  function getUserAccountData(
    address user
  )
    external
    view
    returns (
      uint256 totalCollateralBase,
      uint256 totalDebtBase,
      uint256 availableBorrowsBase,
      uint256 currentLiquidationThreshold,
      uint256 ltv,
      uint256 healthFactor
    );

  /**
   * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
   * interest rate strategy
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param aTokenAddress The address of the aToken that will be assigned to the reserve
   * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
   * @param interestRateStrategyAddress The address of the interest rate strategy contract
   */
  function initReserve(
    address asset,
    address aTokenAddress,
    address variableDebtAddress,
    address interestRateStrategyAddress
  ) external;

  /**
   * @notice Drop a reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev Does not reset eMode flags, which must be considered when reusing the same reserve id for a different reserve.
   * @param asset The address of the underlying asset of the reserve
   */
  function dropReserve(address asset) external;

  /**
   * @notice Updates the address of the interest rate strategy contract
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param rateStrategyAddress The address of the interest rate strategy contract
   */
  function setReserveInterestRateStrategyAddress(
    address asset,
    address rateStrategyAddress
  ) external;

  /**
   * @notice Accumulates interest to all indexes of the reserve
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncIndexesState(address asset) external;

  /**
   * @notice Updates interest rates on the reserve data
   * @dev Only callable by the PoolConfigurator contract
   * @dev To be used when required by the configurator, for example when updating interest rates strategy data
   * @param asset The address of the underlying asset of the reserve
   */
  function syncRatesState(address asset) external;

  /**
   * @notice Sets the configuration bitmap of the reserve as a whole
   * @dev Only callable by the PoolConfigurator contract
   * @param asset The address of the underlying asset of the reserve
   * @param configuration The new configuration bitmap
   */
  function setConfiguration(
    address asset,
    DataTypes.ReserveConfigurationMap calldata configuration
  ) external;

  /**
   * @notice Returns the configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The configuration of the reserve
   */
  function getConfiguration(
    address asset
  ) external view returns (DataTypes.ReserveConfigurationMap memory);

  /**
   * @notice Returns the configuration of the user across all the reserves
   * @param user The user address
   * @return The configuration of the user
   */
  function getUserConfiguration(
    address user
  ) external view returns (DataTypes.UserConfigurationMap memory);

  /**
   * @notice Returns the normalized income of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve's normalized income
   */
  function getReserveNormalizedIncome(address asset) external view returns (uint256);

  /**
   * @notice Returns the normalized variable debt per unit of asset
   * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
   * "dynamic" variable index based on time, current stored index and virtual rate at the current
   * moment (approx. a borrower would get if opening a position). This means that is always used in
   * combination with variable debt supply/balances.
   * If using this function externally, consider that is possible to have an increasing normalized
   * variable debt that is not equivalent to how the variable debt index would be updated in storage
   * (e.g. only updates with non-zero variable debt supply)
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve normalized variable debt
   */
  function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);

  /**
   * @notice Returns the state and configuration of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve
   */
  function getReserveData(address asset) external view returns (DataTypes.ReserveDataLegacy memory);

  /**
   * @notice Returns the state and configuration of the reserve, including extra data included with Aave v3.1
   * @dev DEPRECATED use independent getters instead (getReserveData, getLiquidationGracePeriod)
   * @param asset The address of the underlying asset of the reserve
   * @return The state and configuration data of the reserve with virtual accounting
   */
  function getReserveDataExtended(
    address asset
  ) external view returns (DataTypes.ReserveData memory);

  /**
   * @notice Returns the virtual underlying balance of the reserve
   * @param asset The address of the underlying asset of the reserve
   * @return The reserve virtual underlying balance
   */
  function getVirtualUnderlyingBalance(address asset) external view returns (uint128);

  /**
   * @notice Validates and finalizes an aToken transfer
   * @dev Only callable by the overlying aToken of the `asset`
   * @param asset The address of the underlying asset of the aToken
   * @param from The user from which the aTokens are transferred
   * @param to The user receiving the aTokens
   * @param amount The amount being transferred/withdrawn
   * @param balanceFromBefore The aToken balance of the `from` user before the transfer
   * @param balanceToBefore The aToken balance of the `to` user before the transfer
   */
  function finalizeTransfer(
    address asset,
    address from,
    address to,
    uint256 amount,
    uint256 balanceFromBefore,
    uint256 balanceToBefore
  ) external;

  /**
   * @notice Returns the list of the underlying assets of all the initialized reserves
   * @dev It does not include dropped reserves
   * @return The addresses of the underlying assets of the initialized reserves
   */
  function getReservesList() external view returns (address[] memory);

  /**
   * @notice Returns the number of initialized reserves
   * @dev It includes dropped reserves
   * @return The count
   */
  function getReservesCount() external view returns (uint256);

  /**
   * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
   * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
   * @return The address of the reserve associated with id
   */
  function getReserveAddressById(uint16 id) external view returns (address);

  /**
   * @notice Returns the PoolAddressesProvider connected to this contract
   * @return The address of the PoolAddressesProvider
   */
  function ADDRESSES_PROVIDER() external view returns (IPoolAddressesProvider);

  /**
   * @notice Updates the protocol fee on the bridging
   * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
   */
  function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

  /**
   * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
   * - A part is sent to aToken holders as extra, one time accumulated interest
   * - A part is collected by the protocol treasury
   * @dev The total premium is calculated on the total borrowed amount
   * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
   * @dev Only callable by the PoolConfigurator contract
   * @param flashLoanPremiumTotal The total premium, expressed in bps
   * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
   */
  function updateFlashloanPremiums(
    uint128 flashLoanPremiumTotal,
    uint128 flashLoanPremiumToProtocol
  ) external;

  /**
   * @notice Configures a new or alters an existing collateral configuration of an eMode.
   * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
   * The category 0 is reserved as it's the default for volatile assets
   * @param id The id of the category
   * @param config The configuration of the category
   */
  function configureEModeCategory(
    uint8 id,
    DataTypes.EModeCategoryBaseConfiguration memory config
  ) external;

  /**
   * @notice Replaces the current eMode collateralBitmap.
   * @param id The id of the category
   * @param collateralBitmap The collateralBitmap of the category
   */
  function configureEModeCategoryCollateralBitmap(uint8 id, uint128 collateralBitmap) external;

  /**
   * @notice Replaces the current eMode borrowableBitmap.
   * @param id The id of the category
   * @param borrowableBitmap The borrowableBitmap of the category
   */
  function configureEModeCategoryBorrowableBitmap(uint8 id, uint128 borrowableBitmap) external;

  /**
   * @notice Returns the data of an eMode category
   * @dev DEPRECATED use independent getters instead
   * @param id The id of the category
   * @return The configuration data of the category
   */
  function getEModeCategoryData(
    uint8 id
  ) external view returns (DataTypes.EModeCategoryLegacy memory);

  /**
   * @notice Returns the label of an eMode category
   * @param id The id of the category
   * @return The label of the category
   */
  function getEModeCategoryLabel(uint8 id) external view returns (string memory);

  /**
   * @notice Returns the collateral config of an eMode category
   * @param id The id of the category
   * @return The ltv,lt,lb of the category
   */
  function getEModeCategoryCollateralConfig(
    uint8 id
  ) external view returns (DataTypes.CollateralConfig memory);

  /**
   * @notice Returns the collateralBitmap of an eMode category
   * @param id The id of the category
   * @return The collateralBitmap of the category
   */
  function getEModeCategoryCollateralBitmap(uint8 id) external view returns (uint128);

  /**
   * @notice Returns the borrowableBitmap of an eMode category
   * @param id The id of the category
   * @return The borrowableBitmap of the category
   */
  function getEModeCategoryBorrowableBitmap(uint8 id) external view returns (uint128);

  /**
   * @notice Allows a user to use the protocol in eMode
   * @param categoryId The id of the category
   */
  function setUserEMode(uint8 categoryId) external;

  /**
   * @notice Returns the eMode the user is using
   * @param user The address of the user
   * @return The eMode id
   */
  function getUserEMode(address user) external view returns (uint256);

  /**
   * @notice Resets the isolation mode total debt of the given asset to zero
   * @dev It requires the given asset has zero debt ceiling
   * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
   */
  function resetIsolationModeTotalDebt(address asset) external;

  /**
   * @notice Sets the liquidation grace period of the given asset
   * @dev To enable a liquidation grace period, a timestamp in the future should be set,
   *      To disable a liquidation grace period, any timestamp in the past works, like 0
   * @param asset The address of the underlying asset to set the liquidationGracePeriod
   * @param until Timestamp when the liquidation grace period will end
   **/
  function setLiquidationGracePeriod(address asset, uint40 until) external;

  /**
   * @notice Returns the liquidation grace period of the given asset
   * @param asset The address of the underlying asset
   * @return Timestamp when the liquidation grace period will end
   **/
  function getLiquidationGracePeriod(address asset) external returns (uint40);

  /**
   * @notice Returns the total fee on flash loans
   * @return The total fee on flashloans
   */
  function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

  /**
   * @notice Returns the part of the bridge fees sent to protocol
   * @return The bridge fee sent to the protocol treasury
   */
  function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

  /**
   * @notice Returns the part of the flashloan fees sent to protocol
   * @return The flashloan fee sent to the protocol treasury
   */
  function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

  /**
   * @notice Returns the maximum number of reserves supported to be listed in this Pool
   * @return The maximum number of reserves supported
   */
  function MAX_NUMBER_RESERVES() external view returns (uint16);

  /**
   * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
   * @param assets The list of reserves for which the minting needs to be executed
   */
  function mintToTreasury(address[] calldata assets) external;

  /**
   * @notice Rescue and transfer tokens locked in this contract
   * @param token The address of the token
   * @param to The address of the recipient
   * @param amount The amount of token to transfer
   */
  function rescueTokens(address token, address to, uint256 amount) external;

  /**
   * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
   * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
   * @dev Deprecated: Use the `supply` function instead
   * @param asset The address of the underlying asset to supply
   * @param amount The amount to be supplied
   * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
   *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
   *   is a different wallet
   * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
   *   0 if the action is executed directly by the user, without any middle-man
   */
  function deposit(address asset, uint256 amount, address onBehalfOf, uint16 referralCode) external;

  /**
   * @notice Gets the address of the external FlashLoanLogic
   */
  function getFlashLoanLogic() external view returns (address);

  /**
   * @notice Gets the address of the external BorrowLogic
   */
  function getBorrowLogic() external view returns (address);

  /**
   * @notice Gets the address of the external BridgeLogic
   */
  function getBridgeLogic() external view returns (address);

  /**
   * @notice Gets the address of the external EModeLogic
   */
  function getEModeLogic() external view returns (address);

  /**
   * @notice Gets the address of the external LiquidationLogic
   */
  function getLiquidationLogic() external view returns (address);

  /**
   * @notice Gets the address of the external PoolLogic
   */
  function getPoolLogic() external view returns (address);

  /**
   * @notice Gets the address of the external SupplyLogic
   */
  function getSupplyLogic() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
  /**
   * @dev Emitted when the market identifier is updated.
   * @param oldMarketId The old id of the market
   * @param newMarketId The new id of the market
   */
  event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

  /**
   * @dev Emitted when the pool is updated.
   * @param oldAddress The old address of the Pool
   * @param newAddress The new address of the Pool
   */
  event PoolUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool configurator is updated.
   * @param oldAddress The old address of the PoolConfigurator
   * @param newAddress The new address of the PoolConfigurator
   */
  event PoolConfiguratorUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle is updated.
   * @param oldAddress The old address of the PriceOracle
   * @param newAddress The new address of the PriceOracle
   */
  event PriceOracleUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL manager is updated.
   * @param oldAddress The old address of the ACLManager
   * @param newAddress The new address of the ACLManager
   */
  event ACLManagerUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the ACL admin is updated.
   * @param oldAddress The old address of the ACLAdmin
   * @param newAddress The new address of the ACLAdmin
   */
  event ACLAdminUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the price oracle sentinel is updated.
   * @param oldAddress The old address of the PriceOracleSentinel
   * @param newAddress The new address of the PriceOracleSentinel
   */
  event PriceOracleSentinelUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the pool data provider is updated.
   * @param oldAddress The old address of the PoolDataProvider
   * @param newAddress The new address of the PoolDataProvider
   */
  event PoolDataProviderUpdated(address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when a new proxy is created.
   * @param id The identifier of the proxy
   * @param proxyAddress The address of the created proxy contract
   * @param implementationAddress The address of the implementation contract
   */
  event ProxyCreated(
    bytes32 indexed id,
    address indexed proxyAddress,
    address indexed implementationAddress
  );

  /**
   * @dev Emitted when a new non-proxied contract address is registered.
   * @param id The identifier of the contract
   * @param oldAddress The address of the old contract
   * @param newAddress The address of the new contract
   */
  event AddressSet(bytes32 indexed id, address indexed oldAddress, address indexed newAddress);

  /**
   * @dev Emitted when the implementation of the proxy registered with id is updated
   * @param id The identifier of the contract
   * @param proxyAddress The address of the proxy contract
   * @param oldImplementationAddress The address of the old implementation contract
   * @param newImplementationAddress The address of the new implementation contract
   */
  event AddressSetAsProxy(
    bytes32 indexed id,
    address indexed proxyAddress,
    address oldImplementationAddress,
    address indexed newImplementationAddress
  );

  /**
   * @notice Returns the id of the Aave market to which this contract points to.
   * @return The market id
   */
  function getMarketId() external view returns (string memory);

  /**
   * @notice Associates an id with a specific PoolAddressesProvider.
   * @dev This can be used to create an onchain registry of PoolAddressesProviders to
   * identify and validate multiple Aave markets.
   * @param newMarketId The market id
   */
  function setMarketId(string calldata newMarketId) external;

  /**
   * @notice Returns an address by its identifier.
   * @dev The returned address might be an EOA or a contract, potentially proxied
   * @dev It returns ZERO if there is no registered address with the given id
   * @param id The id
   * @return The address of the registered for the specified id
   */
  function getAddress(bytes32 id) external view returns (address);

  /**
   * @notice General function to update the implementation of a proxy registered with
   * certain `id`. If there is no proxy registered, it will instantiate one and
   * set as implementation the `newImplementationAddress`.
   * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
   * setter function, in order to avoid unexpected consequences
   * @param id The id
   * @param newImplementationAddress The address of the new implementation
   */
  function setAddressAsProxy(bytes32 id, address newImplementationAddress) external;

  /**
   * @notice Sets an address for an id replacing the address saved in the addresses map.
   * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
   * @param id The id
   * @param newAddress The address to set
   */
  function setAddress(bytes32 id, address newAddress) external;

  /**
   * @notice Returns the address of the Pool proxy.
   * @return The Pool proxy address
   */
  function getPool() external view returns (address);

  /**
   * @notice Updates the implementation of the Pool, or creates a proxy
   * setting the new `pool` implementation when the function is called for the first time.
   * @param newPoolImpl The new Pool implementation
   */
  function setPoolImpl(address newPoolImpl) external;

  /**
   * @notice Returns the address of the PoolConfigurator proxy.
   * @return The PoolConfigurator proxy address
   */
  function getPoolConfigurator() external view returns (address);

  /**
   * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
   * setting the new `PoolConfigurator` implementation when the function is called for the first time.
   * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
   */
  function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;

  /**
   * @notice Returns the address of the price oracle.
   * @return The address of the PriceOracle
   */
  function getPriceOracle() external view returns (address);

  /**
   * @notice Updates the address of the price oracle.
   * @param newPriceOracle The address of the new PriceOracle
   */
  function setPriceOracle(address newPriceOracle) external;

  /**
   * @notice Returns the address of the ACL manager.
   * @return The address of the ACLManager
   */
  function getACLManager() external view returns (address);

  /**
   * @notice Updates the address of the ACL manager.
   * @param newAclManager The address of the new ACLManager
   */
  function setACLManager(address newAclManager) external;

  /**
   * @notice Returns the address of the ACL admin.
   * @return The address of the ACL admin
   */
  function getACLAdmin() external view returns (address);

  /**
   * @notice Updates the address of the ACL admin.
   * @param newAclAdmin The address of the new ACL admin
   */
  function setACLAdmin(address newAclAdmin) external;

  /**
   * @notice Returns the address of the price oracle sentinel.
   * @return The address of the PriceOracleSentinel
   */
  function getPriceOracleSentinel() external view returns (address);

  /**
   * @notice Updates the address of the price oracle sentinel.
   * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
   */
  function setPriceOracleSentinel(address newPriceOracleSentinel) external;

  /**
   * @notice Returns the address of the data provider.
   * @return The address of the DataProvider
   */
  function getPoolDataProvider() external view returns (address);

  /**
   * @notice Updates the address of the data provider.
   * @param newDataProvider The address of the new DataProvider
   */
  function setPoolDataProvider(address newDataProvider) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/**
 * @title IScaledBalanceToken
 * @author Aave
 * @notice Defines the basic interface for a scaled-balance token.
 */
interface IScaledBalanceToken {
  /**
   * @dev Emitted after the mint action
   * @param caller The address performing the mint
   * @param onBehalfOf The address of the user that will receive the minted tokens
   * @param value The scaled-up amount being minted (based on user entered amount and balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'onBehalfOf'
   * @param index The next liquidity index of the reserve
   */
  event Mint(
    address indexed caller,
    address indexed onBehalfOf,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @dev Emitted after the burn action
   * @dev If the burn function does not involve a transfer of the underlying asset, the target defaults to zero address
   * @param from The address from which the tokens will be burned
   * @param target The address that will receive the underlying, if any
   * @param value The scaled-up amount being burned (user entered amount - balance increase from interest)
   * @param balanceIncrease The increase in scaled-up balance since the last action of 'from'
   * @param index The next liquidity index of the reserve
   */
  event Burn(
    address indexed from,
    address indexed target,
    uint256 value,
    uint256 balanceIncrease,
    uint256 index
  );

  /**
   * @notice Returns the scaled balance of the user.
   * @dev The scaled balance is the sum of all the updated stored balance divided by the reserve's liquidity index
   * at the moment of the update
   * @param user The user whose balance is calculated
   * @return The scaled balance of the user
   */
  function scaledBalanceOf(address user) external view returns (uint256);

  /**
   * @notice Returns the scaled balance of the user and the scaled total supply.
   * @param user The address of the user
   * @return The scaled balance of the user
   * @return The scaled total supply
   */
  function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);

  /**
   * @notice Returns the scaled total supply of the scaled balance token. Represents sum(debt/index)
   * @return The scaled total supply
   */
  function scaledTotalSupply() external view returns (uint256);

  /**
   * @notice Returns last index interest was accrued to the user's balance
   * @param user The address of the user
   * @return The last index interest was accrued to the user's balance, expressed in ray
   */
  function getPreviousIndex(address user) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IWETH {
  function deposit() external payable;

  function withdraw(uint256) external;

  function approve(address guy, uint256 wad) external returns (bool);

  function transferFrom(address src, address dst, uint256 wad) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;

interface IWrappedTokenGatewayV3 {
  function depositETH(address pool, address onBehalfOf, uint16 referralCode) external payable;

  function withdrawETH(address pool, uint256 amount, address onBehalfOf) external;

  function repayETH(address pool, uint256 amount, address onBehalfOf) external payable;

  function borrowETH(address pool, uint256 amount, uint16 referralCode) external;

  function withdrawETHWithPermit(
    address pool,
    uint256 amount,
    address to,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.10;

import './Context.sol';

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
  address private _owner;

  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
   */
  constructor() {
    address msgSender = _msgSender();
    _owner = msgSender;
    emit OwnershipTransferred(address(0), msgSender);
  }

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(_owner == _msgSender(), 'Ownable: caller is not the owner');
    _;
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions anymore. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby removing any functionality that is only available to the owner.
   */
  function renounceOwnership() public virtual onlyOwner {
    emit OwnershipTransferred(_owner, address(0));
    _owner = address(0);
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    require(newOwner != address(0), 'Ownable: new owner is the zero address');
    emit OwnershipTransferred(_owner, newOwner);
    _owner = newOwner;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';

/**
 * @title ReserveConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the reserve configuration
 */
library ReserveConfiguration {
  uint256 internal constant LTV_MASK =                       0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore
  uint256 internal constant LIQUIDATION_THRESHOLD_MASK =     0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_BONUS_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore
  uint256 internal constant DECIMALS_MASK =                  0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant ACTIVE_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FROZEN_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWING_MASK =                 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore
  // @notice there is an unoccupied hole of 1 bit at position 59 from pre 3.2 stableBorrowRateEnabled
  uint256 internal constant PAUSED_MASK =                    0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROWABLE_IN_ISOLATION_MASK =   0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SILOED_BORROWING_MASK =          0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant FLASHLOAN_ENABLED_MASK =         0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant RESERVE_FACTOR_MASK =            0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant BORROW_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant SUPPLY_CAP_MASK =                0xFFFFFFFFFFFFFFFFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_MASK =  0xFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  // @notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_MASK =         0xFFFFFFFFFFF000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant DEBT_CEILING_MASK =              0xF0000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore
  uint256 internal constant VIRTUAL_ACC_ACTIVE_MASK =        0xEFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF; // prettier-ignore

  /// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
  uint256 internal constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
  uint256 internal constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
  uint256 internal constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
  uint256 internal constant IS_ACTIVE_START_BIT_POSITION = 56;
  uint256 internal constant IS_FROZEN_START_BIT_POSITION = 57;
  uint256 internal constant BORROWING_ENABLED_START_BIT_POSITION = 58;
  uint256 internal constant IS_PAUSED_START_BIT_POSITION = 60;
  uint256 internal constant BORROWABLE_IN_ISOLATION_START_BIT_POSITION = 61;
  uint256 internal constant SILOED_BORROWING_START_BIT_POSITION = 62;
  uint256 internal constant FLASHLOAN_ENABLED_START_BIT_POSITION = 63;
  uint256 internal constant RESERVE_FACTOR_START_BIT_POSITION = 64;
  uint256 internal constant BORROW_CAP_START_BIT_POSITION = 80;
  uint256 internal constant SUPPLY_CAP_START_BIT_POSITION = 116;
  uint256 internal constant LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION = 152;
  //@notice there is an unoccupied hole of 8 bits from 168 to 176 left from pre 3.2 eModeCategory
  uint256 internal constant UNBACKED_MINT_CAP_START_BIT_POSITION = 176;
  uint256 internal constant DEBT_CEILING_START_BIT_POSITION = 212;
  uint256 internal constant VIRTUAL_ACC_START_BIT_POSITION = 252;

  uint256 internal constant MAX_VALID_LTV = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
  uint256 internal constant MAX_VALID_LIQUIDATION_BONUS = 65535;
  uint256 internal constant MAX_VALID_DECIMALS = 255;
  uint256 internal constant MAX_VALID_RESERVE_FACTOR = 65535;
  uint256 internal constant MAX_VALID_BORROW_CAP = 68719476735;
  uint256 internal constant MAX_VALID_SUPPLY_CAP = 68719476735;
  uint256 internal constant MAX_VALID_LIQUIDATION_PROTOCOL_FEE = 65535;
  uint256 internal constant MAX_VALID_UNBACKED_MINT_CAP = 68719476735;
  uint256 internal constant MAX_VALID_DEBT_CEILING = 1099511627775;

  uint256 public constant DEBT_CEILING_DECIMALS = 2;
  uint16 public constant MAX_RESERVES_COUNT = 128;

  /**
   * @notice Sets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @param ltv The new ltv
   */
  function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
    require(ltv <= MAX_VALID_LTV, Errors.INVALID_LTV);

    self.data = (self.data & LTV_MASK) | ltv;
  }

  /**
   * @notice Gets the Loan to Value of the reserve
   * @param self The reserve configuration
   * @return The loan to value
   */
  function getLtv(DataTypes.ReserveConfigurationMap memory self) internal pure returns (uint256) {
    return self.data & ~LTV_MASK;
  }

  /**
   * @notice Sets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @param threshold The new liquidation threshold
   */
  function setLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 threshold
  ) internal pure {
    require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.INVALID_LIQ_THRESHOLD);

    self.data =
      (self.data & LIQUIDATION_THRESHOLD_MASK) |
      (threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
  }

  /**
   * @notice Gets the liquidation threshold of the reserve
   * @param self The reserve configuration
   * @return The liquidation threshold
   */
  function getLiquidationThreshold(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
  }

  /**
   * @notice Sets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @param bonus The new liquidation bonus
   */
  function setLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 bonus
  ) internal pure {
    require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.INVALID_LIQ_BONUS);

    self.data =
      (self.data & LIQUIDATION_BONUS_MASK) |
      (bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
  }

  /**
   * @notice Gets the liquidation bonus of the reserve
   * @param self The reserve configuration
   * @return The liquidation bonus
   */
  function getLiquidationBonus(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
  }

  /**
   * @notice Sets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @param decimals The decimals
   */
  function setDecimals(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 decimals
  ) internal pure {
    require(decimals <= MAX_VALID_DECIMALS, Errors.INVALID_DECIMALS);

    self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
  }

  /**
   * @notice Gets the decimals of the underlying asset of the reserve
   * @param self The reserve configuration
   * @return The decimals of the asset
   */
  function getDecimals(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
  }

  /**
   * @notice Sets the active state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
    self.data =
      (self.data & ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
  }

  /**
   * @notice Gets the active state of the reserve
   * @param self The reserve configuration
   * @return The active state
   */
  function getActive(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~ACTIVE_MASK) != 0;
  }

  /**
   * @notice Sets the frozen state of the reserve
   * @param self The reserve configuration
   * @param frozen The frozen state
   */
  function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
    self.data =
      (self.data & FROZEN_MASK) |
      (uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
  }

  /**
   * @notice Gets the frozen state of the reserve
   * @param self The reserve configuration
   * @return The frozen state
   */
  function getFrozen(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~FROZEN_MASK) != 0;
  }

  /**
   * @notice Sets the paused state of the reserve
   * @param self The reserve configuration
   * @param paused The paused state
   */
  function setPaused(DataTypes.ReserveConfigurationMap memory self, bool paused) internal pure {
    self.data =
      (self.data & PAUSED_MASK) |
      (uint256(paused ? 1 : 0) << IS_PAUSED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the paused state of the reserve
   * @param self The reserve configuration
   * @return The paused state
   */
  function getPaused(DataTypes.ReserveConfigurationMap memory self) internal pure returns (bool) {
    return (self.data & ~PAUSED_MASK) != 0;
  }

  /**
   * @notice Sets the borrowable in isolation flag for the reserve.
   * @dev When this flag is set to true, the asset will be borrowable against isolated collaterals and the borrowed
   * amount will be accumulated in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @param borrowable True if the asset is borrowable
   */
  function setBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self,
    bool borrowable
  ) internal pure {
    self.data =
      (self.data & BORROWABLE_IN_ISOLATION_MASK) |
      (uint256(borrowable ? 1 : 0) << BORROWABLE_IN_ISOLATION_START_BIT_POSITION);
  }

  /**
   * @notice Gets the borrowable in isolation flag for the reserve.
   * @dev If the returned flag is true, the asset is borrowable against isolated collateral. Assets borrowed with
   * isolated collateral is accounted for in the isolated collateral's total debt exposure.
   * @dev Only assets of the same family (eg USD stablecoins) should be borrowable in isolation mode to keep
   * consistency in the debt ceiling calculations.
   * @param self The reserve configuration
   * @return The borrowable in isolation flag
   */
  function getBorrowableInIsolation(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWABLE_IN_ISOLATION_MASK) != 0;
  }

  /**
   * @notice Sets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @param siloed True if the asset is siloed
   */
  function setSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self,
    bool siloed
  ) internal pure {
    self.data =
      (self.data & SILOED_BORROWING_MASK) |
      (uint256(siloed ? 1 : 0) << SILOED_BORROWING_START_BIT_POSITION);
  }

  /**
   * @notice Gets the siloed borrowing flag for the reserve.
   * @dev When this flag is set to true, users borrowing this asset will not be allowed to borrow any other asset.
   * @param self The reserve configuration
   * @return The siloed borrowing flag
   */
  function getSiloedBorrowing(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~SILOED_BORROWING_MASK) != 0;
  }

  /**
   * @notice Enables or disables borrowing on the reserve
   * @param self The reserve configuration
   * @param enabled True if the borrowing needs to be enabled, false otherwise
   */
  function setBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool enabled
  ) internal pure {
    self.data =
      (self.data & BORROWING_MASK) |
      (uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the borrowing state of the reserve
   * @param self The reserve configuration
   * @return The borrowing state
   */
  function getBorrowingEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~BORROWING_MASK) != 0;
  }

  /**
   * @notice Sets the reserve factor of the reserve
   * @param self The reserve configuration
   * @param reserveFactor The reserve factor
   */
  function setReserveFactor(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 reserveFactor
  ) internal pure {
    require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.INVALID_RESERVE_FACTOR);

    self.data =
      (self.data & RESERVE_FACTOR_MASK) |
      (reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
  }

  /**
   * @notice Gets the reserve factor of the reserve
   * @param self The reserve configuration
   * @return The reserve factor
   */
  function getReserveFactor(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
  }

  /**
   * @notice Sets the borrow cap of the reserve
   * @param self The reserve configuration
   * @param borrowCap The borrow cap
   */
  function setBorrowCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 borrowCap
  ) internal pure {
    require(borrowCap <= MAX_VALID_BORROW_CAP, Errors.INVALID_BORROW_CAP);

    self.data = (self.data & BORROW_CAP_MASK) | (borrowCap << BORROW_CAP_START_BIT_POSITION);
  }

  /**
   * @notice Gets the borrow cap of the reserve
   * @param self The reserve configuration
   * @return The borrow cap
   */
  function getBorrowCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION;
  }

  /**
   * @notice Sets the supply cap of the reserve
   * @param self The reserve configuration
   * @param supplyCap The supply cap
   */
  function setSupplyCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 supplyCap
  ) internal pure {
    require(supplyCap <= MAX_VALID_SUPPLY_CAP, Errors.INVALID_SUPPLY_CAP);

    self.data = (self.data & SUPPLY_CAP_MASK) | (supplyCap << SUPPLY_CAP_START_BIT_POSITION);
  }

  /**
   * @notice Gets the supply cap of the reserve
   * @param self The reserve configuration
   * @return The supply cap
   */
  function getSupplyCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION;
  }

  /**
   * @notice Sets the debt ceiling in isolation mode for the asset
   * @param self The reserve configuration
   * @param ceiling The maximum debt ceiling for the asset
   */
  function setDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 ceiling
  ) internal pure {
    require(ceiling <= MAX_VALID_DEBT_CEILING, Errors.INVALID_DEBT_CEILING);

    self.data = (self.data & DEBT_CEILING_MASK) | (ceiling << DEBT_CEILING_START_BIT_POSITION);
  }

  /**
   * @notice Gets the debt ceiling for the asset if the asset is in isolation mode
   * @param self The reserve configuration
   * @return The debt ceiling (0 = isolation mode disabled)
   */
  function getDebtCeiling(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~DEBT_CEILING_MASK) >> DEBT_CEILING_START_BIT_POSITION;
  }

  /**
   * @notice Sets the liquidation protocol fee of the reserve
   * @param self The reserve configuration
   * @param liquidationProtocolFee The liquidation protocol fee
   */
  function setLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 liquidationProtocolFee
  ) internal pure {
    require(
      liquidationProtocolFee <= MAX_VALID_LIQUIDATION_PROTOCOL_FEE,
      Errors.INVALID_LIQUIDATION_PROTOCOL_FEE
    );

    self.data =
      (self.data & LIQUIDATION_PROTOCOL_FEE_MASK) |
      (liquidationProtocolFee << LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION);
  }

  /**
   * @dev Gets the liquidation protocol fee
   * @param self The reserve configuration
   * @return The liquidation protocol fee
   */
  function getLiquidationProtocolFee(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return
      (self.data & ~LIQUIDATION_PROTOCOL_FEE_MASK) >> LIQUIDATION_PROTOCOL_FEE_START_BIT_POSITION;
  }

  /**
   * @notice Sets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @param unbackedMintCap The unbacked mint cap
   */
  function setUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self,
    uint256 unbackedMintCap
  ) internal pure {
    require(unbackedMintCap <= MAX_VALID_UNBACKED_MINT_CAP, Errors.INVALID_UNBACKED_MINT_CAP);

    self.data =
      (self.data & UNBACKED_MINT_CAP_MASK) |
      (unbackedMintCap << UNBACKED_MINT_CAP_START_BIT_POSITION);
  }

  /**
   * @dev Gets the unbacked mint cap of the reserve
   * @param self The reserve configuration
   * @return The unbacked mint cap
   */
  function getUnbackedMintCap(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256) {
    return (self.data & ~UNBACKED_MINT_CAP_MASK) >> UNBACKED_MINT_CAP_START_BIT_POSITION;
  }

  /**
   * @notice Sets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @param flashLoanEnabled True if the asset is flashloanable, false otherwise
   */
  function setFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self,
    bool flashLoanEnabled
  ) internal pure {
    self.data =
      (self.data & FLASHLOAN_ENABLED_MASK) |
      (uint256(flashLoanEnabled ? 1 : 0) << FLASHLOAN_ENABLED_START_BIT_POSITION);
  }

  /**
   * @notice Gets the flashloanable flag for the reserve
   * @param self The reserve configuration
   * @return The flashloanable flag
   */
  function getFlashLoanEnabled(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~FLASHLOAN_ENABLED_MASK) != 0;
  }

  /**
   * @notice Sets the virtual account active/not state of the reserve
   * @param self The reserve configuration
   * @param active The active state
   */
  function setVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self,
    bool active
  ) internal pure {
    self.data =
      (self.data & VIRTUAL_ACC_ACTIVE_MASK) |
      (uint256(active ? 1 : 0) << VIRTUAL_ACC_START_BIT_POSITION);
  }

  /**
   * @notice Gets the virtual account active/not state of the reserve
   * @dev The state should be true for all normal assets and should be false
   *  only in special cases (ex. GHO) where an asset is minted instead of supplied.
   * @param self The reserve configuration
   * @return The active state
   */
  function getIsVirtualAccActive(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool) {
    return (self.data & ~VIRTUAL_ACC_ACTIVE_MASK) != 0;
  }

  /**
   * @notice Gets the configuration flags of the reserve
   * @param self The reserve configuration
   * @return The state flag representing active
   * @return The state flag representing frozen
   * @return The state flag representing borrowing enabled
   * @return The state flag representing paused
   */
  function getFlags(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (bool, bool, bool, bool) {
    uint256 dataLocal = self.data;

    return (
      (dataLocal & ~ACTIVE_MASK) != 0,
      (dataLocal & ~FROZEN_MASK) != 0,
      (dataLocal & ~BORROWING_MASK) != 0,
      (dataLocal & ~PAUSED_MASK) != 0
    );
  }

  /**
   * @notice Gets the configuration parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing ltv
   * @return The state param representing liquidation threshold
   * @return The state param representing liquidation bonus
   * @return The state param representing reserve decimals
   * @return The state param representing reserve factor
   */
  function getParams(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256, uint256, uint256, uint256) {
    uint256 dataLocal = self.data;

    return (
      dataLocal & ~LTV_MASK,
      (dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
      (dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
      (dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
      (dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
    );
  }

  /**
   * @notice Gets the caps parameters of the reserve from storage
   * @param self The reserve configuration
   * @return The state param representing borrow cap
   * @return The state param representing supply cap.
   */
  function getCaps(
    DataTypes.ReserveConfigurationMap memory self
  ) internal pure returns (uint256, uint256) {
    uint256 dataLocal = self.data;

    return (
      (dataLocal & ~BORROW_CAP_MASK) >> BORROW_CAP_START_BIT_POSITION,
      (dataLocal & ~SUPPLY_CAP_MASK) >> SUPPLY_CAP_START_BIT_POSITION
    );
  }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
import {ReserveConfiguration} from './ReserveConfiguration.sol';

/**
 * @title UserConfiguration library
 * @author Aave
 * @notice Implements the bitmap logic to handle the user configuration
 */
library UserConfiguration {
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;

  uint256 internal constant BORROWING_MASK =
    0x5555555555555555555555555555555555555555555555555555555555555555;
  uint256 internal constant COLLATERAL_MASK =
    0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA;

  /**
   * @notice Sets if the user is borrowing the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param borrowing True if the user is borrowing the reserve, false otherwise
   */
  function setBorrowing(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool borrowing
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << (reserveIndex << 1);
      if (borrowing) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }

  /**
   * @notice Sets if the user is using as collateral the reserve identified by reserveIndex
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @param usingAsCollateral True if the user is using the reserve as collateral, false otherwise
   */
  function setUsingAsCollateral(
    DataTypes.UserConfigurationMap storage self,
    uint256 reserveIndex,
    bool usingAsCollateral
  ) internal {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      uint256 bit = 1 << ((reserveIndex << 1) + 1);
      if (usingAsCollateral) {
        self.data |= bit;
      } else {
        self.data &= ~bit;
      }
    }
  }

  /**
   * @notice Returns if a user has been using the reserve for borrowing or as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing or as collateral, false otherwise
   */
  function isUsingAsCollateralOrBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 3 != 0;
    }
  }

  /**
   * @notice Validate a user has been using the reserve for borrowing
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve for borrowing, false otherwise
   */
  function isBorrowing(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> (reserveIndex << 1)) & 1 != 0;
    }
  }

  /**
   * @notice Validate a user has been using the reserve as collateral
   * @param self The configuration object
   * @param reserveIndex The index of the reserve in the bitmap
   * @return True if the user has been using a reserve as collateral, false otherwise
   */
  function isUsingAsCollateral(
    DataTypes.UserConfigurationMap memory self,
    uint256 reserveIndex
  ) internal pure returns (bool) {
    unchecked {
      require(reserveIndex < ReserveConfiguration.MAX_RESERVES_COUNT, Errors.INVALID_RESERVE_INDEX);
      return (self.data >> ((reserveIndex << 1) + 1)) & 1 != 0;
    }
  }

  /**
   * @notice Checks if a user has been supplying only one reserve as collateral
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isUsingAsCollateralOne(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    uint256 collateralData = self.data & COLLATERAL_MASK;
    return collateralData != 0 && (collateralData & (collateralData - 1) == 0);
  }

  /**
   * @notice Checks if a user has been supplying any reserve as collateral
   * @param self The configuration object
   * @return True if the user has been supplying as collateral any reserve, false otherwise
   */
  function isUsingAsCollateralAny(
    DataTypes.UserConfigurationMap memory self
  ) internal pure returns (bool) {
    return self.data & COLLATERAL_MASK != 0;
  }

  /**
   * @notice Checks if a user has been borrowing only one asset
   * @dev this uses a simple trick - if a number is a power of two (only one bit set) then n & (n - 1) == 0
   * @param self The configuration object
   * @return True if the user has been supplying as collateral one reserve, false otherwise
   */
  function isBorrowingOne(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    uint256 borrowingData = self.data & BORROWING_MASK;
    return borrowingData != 0 && (borrowingData & (borrowingData - 1) == 0);
  }

  /**
   * @notice Checks if a user has been borrowing from any reserve
   * @param self The configuration object
   * @return True if the user has been borrowing any reserve, false otherwise
   */
  function isBorrowingAny(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data & BORROWING_MASK != 0;
  }

  /**
   * @notice Checks if a user has not been using any reserve for borrowing or supply
   * @param self The configuration object
   * @return True if the user has not been borrowing or supplying any reserve, false otherwise
   */
  function isEmpty(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
    return self.data == 0;
  }

  /**
   * @notice Returns the Isolation Mode state of the user
   * @param self The configuration object
   * @param reservesData The state of all the reserves
   * @param reservesList The addresses of all the active reserves
   * @return True if the user is in isolation mode, false otherwise
   * @return The address of the only asset used as collateral
   * @return The debt ceiling of the reserve
   */
  function getIsolationModeState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address, uint256) {
    if (isUsingAsCollateralOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, COLLATERAL_MASK);

      address assetAddress = reservesList[assetId];
      uint256 ceiling = reservesData[assetAddress].configuration.getDebtCeiling();
      if (ceiling != 0) {
        return (true, assetAddress, ceiling);
      }
    }
    return (false, address(0), 0);
  }

  /**
   * @notice Returns the siloed borrowing state for the user
   * @param self The configuration object
   * @param reservesData The data of all the reserves
   * @param reservesList The reserve list
   * @return True if the user has borrowed a siloed asset, false otherwise
   * @return The address of the only borrowed asset
   */
  function getSiloedBorrowingState(
    DataTypes.UserConfigurationMap memory self,
    mapping(address => DataTypes.ReserveData) storage reservesData,
    mapping(uint256 => address) storage reservesList
  ) internal view returns (bool, address) {
    if (isBorrowingOne(self)) {
      uint256 assetId = _getFirstAssetIdByMask(self, BORROWING_MASK);
      address assetAddress = reservesList[assetId];
      if (reservesData[assetAddress].configuration.getSiloedBorrowing()) {
        return (true, assetAddress);
      }
    }

    return (false, address(0));
  }

  /**
   * @notice Returns the address of the first asset flagged in the bitmap given the corresponding bitmask
   * @param self The configuration object
   * @return The index of the first asset flagged in the bitmap once the corresponding mask is applied
   */
  function _getFirstAssetIdByMask(
    DataTypes.UserConfigurationMap memory self,
    uint256 mask
  ) internal pure returns (uint256) {
    unchecked {
      uint256 bitmapData = self.data & mask;
      uint256 firstAssetPosition = bitmapData & ~(bitmapData - 1);
      uint256 id;

      while ((firstAssetPosition >>= 2) != 0) {
        id += 1;
      }
      return id;
    }
  }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.10;

import {Ownable} from '../dependencies/openzeppelin/contracts/Ownable.sol';
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {GPv2SafeERC20} from '../dependencies/gnosis/contracts/GPv2SafeERC20.sol';
import {IWETH} from './interfaces/IWETH.sol';
import {IPool} from '../interfaces/IPool.sol';
import {IAToken} from '../interfaces/IAToken.sol';
import {ReserveConfiguration} from '../protocol/libraries/configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../protocol/libraries/configuration/UserConfiguration.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
import {IWrappedTokenGatewayV3} from './interfaces/IWrappedTokenGatewayV3.sol';

/**
 * @dev This contract is an upgrade of the WrappedTokenGatewayV3 contract, with immutable pool address.
 * This contract keeps the same interface of the deprecated WrappedTokenGatewayV3 contract.
 */
contract WrappedTokenGatewayV3 is IWrappedTokenGatewayV3, Ownable {
  using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
  using UserConfiguration for DataTypes.UserConfigurationMap;
  using GPv2SafeERC20 for IERC20;

  IWETH internal immutable WETH;
  IPool internal immutable POOL;

  /**
   * @dev Sets the WETH address and the PoolAddressesProvider address. Infinite approves pool.
   * @param weth Address of the Wrapped Ether contract
   * @param owner Address of the owner of this contract
   **/
  constructor(address weth, address owner, IPool pool) {
    WETH = IWETH(weth);
    POOL = pool;
    transferOwnership(owner);
    IWETH(weth).approve(address(pool), type(uint256).max);
  }

  /**
   * @dev deposits WETH into the reserve, using native ETH. A corresponding amount of the overlying asset (aTokens)
   * is minted.
   * @param onBehalfOf address of the user who will receive the aTokens representing the deposit
   * @param referralCode integrators are assigned a referral code and can potentially receive rewards.
   **/
  function depositETH(address, address onBehalfOf, uint16 referralCode) external payable override {
    WETH.deposit{value: msg.value}();
    POOL.deposit(address(WETH), msg.value, onBehalfOf, referralCode);
  }

  /**
   * @dev withdraws the WETH _reserves of msg.sender.
   * @param amount amount of aWETH to withdraw and receive native ETH
   * @param to address of the user who will receive native ETH
   */
  function withdrawETH(address, uint256 amount, address to) external override {
    IAToken aWETH = IAToken(POOL.getReserveData(address(WETH)).aTokenAddress);
    uint256 userBalance = aWETH.balanceOf(msg.sender);
    uint256 amountToWithdraw = amount;

    // if amount is equal to uint(-1), the user wants to redeem everything
    if (amount == type(uint256).max) {
      amountToWithdraw = userBalance;
    }
    aWETH.transferFrom(msg.sender, address(this), amountToWithdraw);
    POOL.withdraw(address(WETH), amountToWithdraw, address(this));
    WETH.withdraw(amountToWithdraw);
    _safeTransferETH(to, amountToWithdraw);
  }

  /**
   * @dev repays a borrow on the WETH reserve, for the specified amount (or for the whole amount, if uint256(-1) is specified).
   * @param amount the amount to repay, or uint256(-1) if the user wants to repay everything
   * @param onBehalfOf the address for which msg.sender is repaying
   */
  function repayETH(address, uint256 amount, address onBehalfOf) external payable override {
    uint256 paybackAmount = IERC20((POOL.getReserveData(address(WETH))).variableDebtTokenAddress)
      .balanceOf(onBehalfOf);

    if (amount < paybackAmount) {
      paybackAmount = amount;
    }
    require(msg.value >= paybackAmount, 'msg.value is less than repayment amount');
    WETH.deposit{value: paybackAmount}();
    POOL.repay(
      address(WETH),
      paybackAmount,
      uint256(DataTypes.InterestRateMode.VARIABLE),
      onBehalfOf
    );

    // refund remaining dust eth
    if (msg.value > paybackAmount) _safeTransferETH(msg.sender, msg.value - paybackAmount);
  }

  /**
   * @dev borrow WETH, unwraps to ETH and send both the ETH and DebtTokens to msg.sender, via `approveDelegation` and onBehalf argument in `Pool.borrow`.
   * @param amount the amount of ETH to borrow
   * @param referralCode integrators are assigned a referral code and can potentially receive rewards
   */
  function borrowETH(address, uint256 amount, uint16 referralCode) external override {
    POOL.borrow(
      address(WETH),
      amount,
      uint256(DataTypes.InterestRateMode.VARIABLE),
      referralCode,
      msg.sender
    );
    WETH.withdraw(amount);
    _safeTransferETH(msg.sender, amount);
  }

  /**
   * @dev withdraws the WETH _reserves of msg.sender.
   * @param amount amount of aWETH to withdraw and receive native ETH
   * @param to address of the user who will receive native ETH
   * @param deadline validity deadline of permit and so depositWithPermit signature
   * @param permitV V parameter of ERC712 permit sig
   * @param permitR R parameter of ERC712 permit sig
   * @param permitS S parameter of ERC712 permit sig
   */
  function withdrawETHWithPermit(
    address,
    uint256 amount,
    address to,
    uint256 deadline,
    uint8 permitV,
    bytes32 permitR,
    bytes32 permitS
  ) external override {
    IAToken aWETH = IAToken(POOL.getReserveData(address(WETH)).aTokenAddress);
    uint256 userBalance = aWETH.balanceOf(msg.sender);
    uint256 amountToWithdraw = amount;

    // if amount is equal to type(uint256).max, the user wants to redeem everything
    if (amount == type(uint256).max) {
      amountToWithdraw = userBalance;
    }
    // permit `amount` rather than `amountToWithdraw` to make it easier for front-ends and integrators
    aWETH.permit(msg.sender, address(this), amount, deadline, permitV, permitR, permitS);
    aWETH.transferFrom(msg.sender, address(this), amountToWithdraw);
    POOL.withdraw(address(WETH), amountToWithdraw, address(this));
    WETH.withdraw(amountToWithdraw);
    _safeTransferETH(to, amountToWithdraw);
  }

  /**
   * @dev transfer ETH to an address, revert if it fails.
   * @param to recipient of the transfer
   * @param value the amount to send
   */
  function _safeTransferETH(address to, uint256 value) internal {
    (bool success, ) = to.call{value: value}(new bytes(0));
    require(success, 'ETH_TRANSFER_FAILED');
  }

  /**
   * @dev transfer ERC20 from the utility contract, for ERC20 recovery in case of stuck tokens due
   * direct transfers to the contract address.
   * @param token token to transfer
   * @param to recipient of the transfer
   * @param amount amount to send
   */
  function emergencyTokenTransfer(address token, address to, uint256 amount) external onlyOwner {
    IERC20(token).safeTransfer(to, amount);
  }

  /**
   * @dev transfer native Ether from the utility contract, for native Ether recovery in case of stuck Ether
   * due to selfdestructs or ether transfers to the pre-computed contract address before deployment.
   * @param to recipient of the transfer
   * @param amount amount to send
   */
  function emergencyEtherTransfer(address to, uint256 amount) external onlyOwner {
    _safeTransferETH(to, amount);
  }

  /**
   * @dev Get WETH address used by WrappedTokenGatewayV3
   */
  function getWETHAddress() external view returns (address) {
    return address(WETH);
  }

  /**
   * @dev Only WETH contract is allowed to transfer ETH here. Prevent other addresses to send Ether to this contract.
   */
  receive() external payable {
    require(msg.sender == address(WETH), 'Receive not allowed');
  }

  /**
   * @dev Revert fallback calls
   */
  fallback() external payable {
    revert('Fallback not allowed');
  }
}

{
  "compilationTarget": {
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/helpers/WrappedTokenGatewayV3.sol": "WrappedTokenGatewayV3"
  },
  "evmVersion": "shanghai",
  "libraries": {
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/BorrowLogic.sol:BorrowLogic": "0x4c52fe2162200bf26c314d7bbd8611699139d553",
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/BridgeLogic.sol:BridgeLogic": "0x97dcbfae5372a63128f141e8c0bc2c871ca5f604",
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/ConfiguratorLogic.sol:ConfiguratorLogic": "0x3a593a622754ed9572599d33aad6d799b0899fae",
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/EModeLogic.sol:EModeLogic": "0x88f864670de467aa73cd45325f9652c578c8ab85",
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/FlashLoanLogic.sol:FlashLoanLogic": "0xb32381fefff45ee9f47fd2f2cf83c832637d6ef0",
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/LiquidationLogic.sol:LiquidationLogic": "0x80d16970b31243fe67dab028115f3e4c3e3510ad",
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/PoolLogic.sol:PoolLogic": "0xa58fb47be9074828215a173564c0cd10f6f249bf",
    "lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/contracts/protocol/libraries/logic/SupplyLogic.sol:SupplyLogic": "0x2b22e425c1322fba0dbf17bb1da25d71811ee7ba"
  },
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [
    ":@openzeppelin/contracts-upgradeable/=lib/aave-v3-origin-private/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/contracts/",
    ":@openzeppelin/contracts/=lib/aave-v3-origin-private/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/contracts/",
    ":aave-address-book/=lib/aave-helpers/lib/aave-address-book/src/",
    ":aave-helpers/=lib/aave-helpers/",
    ":aave-v3-core/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/core/",
    ":aave-v3-origin-test/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/test/",
    ":aave-v3-origin-tests/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/tests/",
    ":aave-v3-origin/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/",
    ":aave-v3-periphery/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/src/periphery/",
    ":ds-test/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/forge-std/lib/ds-test/src/",
    ":erc4626-tests/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    ":forge-std/=lib/forge-std/src/",
    ":openzeppelin-contracts-upgradeable/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/",
    ":openzeppelin-contracts/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/solidity-utils/lib/openzeppelin-contracts-upgradeable/lib/openzeppelin-contracts/",
    ":solidity-utils/=lib/aave-helpers/lib/aave-address-book/lib/aave-v3-origin/lib/solidity-utils/src/"
  ]
}