// File: contracts\CollectionProxy\IERC1538.sol

pragma solidity ^0.8.0;

/// @title ERC1538 Transparent Contract Standard
/// @dev Required interface
///  Note: the ERC-165 identifier for this interface is 0x61455567
interface IERC1538 {

    /// @dev This emits when one or a set of functions are updated in a transparent contract.
    ///  The message string should give a short description of the change and why
    ///  the change was made.
    event CommitMessage(string message);

    /// @dev This emits for each function that is updated in a transparent contract.
    ///  functionId is the bytes4 of the keccak256 of the function signature.
    ///  oldDelegate is the delegate contract address of the old delegate contract if
    ///  the function is being replaced or removed.
    ///  oldDelegate is the zero value address(0) if a function is being added for the
    ///  first time.
    ///  newDelegate is the delegate contract address of the new delegate contract if
    ///  the function is being added for the first time or if the function is being
    ///  replaced.
    ///  newDelegate is the zero value address(0) if the function is being removed.
    event FunctionUpdate(bytes4 indexed functionId, address indexed oldDelegate, address indexed newDelegate, string functionSignature);

    /// @notice Updates functions in a transparent contract.
    /// @dev If the value of _delegate is zero then the functions specified
    ///  in _functionSignatures are removed.
    ///  If the value of _delegate is a delegate contract address then the functions
    ///  specified in _functionSignatures will be delegated to that address.
    /// @param _delegate The address of a delegate contract to delegate to or zero
    ///        to remove functions.
    /// @param _functionSignatures A list of function signatures listed one after the other
    /// @param _commitMessage A short description of the change and why it is made
    ///        This message is passed to the CommitMessage event.
    function updateContract(address _delegate, string calldata _functionSignatures, string calldata _commitMessage) external;
}

// File: contracts\CollectionProxy\ProxyBaseStorage.sol

pragma solidity ^0.8.0;

///////////////////////////////////////////////////////////////////////////////////////////////////
/**
 * @title ProxyBaseStorage
 * @dev Defining base storage for the proxy contract.
 */
///////////////////////////////////////////////////////////////////////////////////////////////////

contract ProxyBaseStorage {

    //////////////////////////////////////////// VARS /////////////////////////////////////////////

    // maps functions to the delegate contracts that execute the functions.
    // funcId => delegate contract
    mapping(bytes4 => address) public delegates;

    // array of function signatures supported by the contract.
    bytes[] public funcSignatures;

    // maps each function signature to its position in the funcSignatures array.
    // signature => index+1
    mapping(bytes => uint256) internal funcSignatureToIndex;

    // proxy address of itself, can be used for cross-delegate calls but also safety checking.
    address proxy;

    ///////////////////////////////////////////////////////////////////////////////////////////////

}

// File: contracts\IERC721A.sol


// ERC721A Contracts v4.2.3
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721A.
 */
interface IERC721A {
    /**
     * The caller must own the token or be an approved operator.
     */
    error ApprovalCallerNotOwnerNorApproved();

    /**
     * The token does not exist.
     */
    error ApprovalQueryForNonexistentToken();

    /**
     * Cannot query the balance for the zero address.
     */
    error BalanceQueryForZeroAddress();

    /**
     * Cannot mint to the zero address.
     */
    error MintToZeroAddress();

    /**
     * The quantity of tokens minted must be more than zero.
     */
    error MintZeroQuantity();

    /**
     * The token does not exist.
     */
    error OwnerQueryForNonexistentToken();

    /**
     * The caller must own the token or be an approved operator.
     */
    error TransferCallerNotOwnerNorApproved();

    /**
     * The token must be owned by `from`.
     */
    error TransferFromIncorrectOwner();

    /**
     * Cannot safely transfer to a contract that does not implement the
     * ERC721Receiver interface.
     */
    error TransferToNonERC721ReceiverImplementer();

    /**
     * Cannot transfer to the zero address.
     */
    error TransferToZeroAddress();

    /**
     * The token does not exist.
     */
    error URIQueryForNonexistentToken();

    /**
     * The `quantity` minted with ERC2309 exceeds the safety limit.
     */
    error MintERC2309QuantityExceedsLimit();

    /**
     * The `extraData` cannot be set on an unintialized ownership slot.
     */
    error OwnershipNotInitializedForExtraData();

    // =============================================================
    //                            STRUCTS
    // =============================================================

    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Stores the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
        uint24 extraData;
    }

    // =============================================================
    //                         TOKEN COUNTERS
    // =============================================================

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() external view returns (uint256);

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);

    // =============================================================
    //                            IERC721
    // =============================================================

    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables
     * (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`,
     * checking first that contract recipients are aware of the ERC721 protocol
     * to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move
     * this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external payable;

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}
     * whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external payable;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external payable;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);

    // =============================================================
    //                           IERC2309
    // =============================================================

    /**
     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`
     * (inclusive) is transferred from `from` to `to`, as defined in the
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
     *
     * See {_mintERC2309} for more details.
     */
    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}

// File: contracts\ERC721A.sol


// ERC721A Contracts v4.2.3
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721 token receiver.
 */
interface ERC721A__IERC721Receiver {
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

/**
 * @title ERC721A
 *
 * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
 * Non-Fungible Token Standard, including the Metadata extension.
 * Optimized for lower gas during batch mints.
 *
 * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
 * starting from `_startTokenId()`.
 *
 * Assumptions:
 *
 * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is IERC721A {
    // Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
    struct TokenApprovalRef {
        address value;
    }

    // =============================================================
    //                           CONSTANTS
    // =============================================================

    // Mask of an entry in packed address data.
    uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;

    // The bit position of `numberMinted` in packed address data.
    uint256 private constant _BITPOS_NUMBER_MINTED = 64;

    // The bit position of `numberBurned` in packed address data.
    uint256 private constant _BITPOS_NUMBER_BURNED = 128;

    // The bit position of `aux` in packed address data.
    uint256 private constant _BITPOS_AUX = 192;

    // Mask of all 256 bits in packed address data except the 64 bits for `aux`.
    uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;

    // The bit position of `startTimestamp` in packed ownership.
    uint256 private constant _BITPOS_START_TIMESTAMP = 160;

    // The bit mask of the `burned` bit in packed ownership.
    uint256 private constant _BITMASK_BURNED = 1 << 224;

    // The bit position of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;

    // The bit mask of the `nextInitialized` bit in packed ownership.
    uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;

    // The bit position of `extraData` in packed ownership.
    uint256 private constant _BITPOS_EXTRA_DATA = 232;

    // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
    uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;

    // The mask of the lower 160 bits for addresses.
    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;

    // The maximum `quantity` that can be minted with {_mintERC2309}.
    // This limit is to prevent overflows on the address data entries.
    // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
    // is required to cause an overflow, which is unrealistic.
    uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;

    // The `Transfer` event signature is given by:
    // `keccak256(bytes("Transfer(address,address,uint256)"))`.
    bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
        0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;

    // =============================================================
    //                            STORAGE
    // =============================================================

    // The next token ID to be minted.
    uint256 internal _currentIndex;

    // The number of tokens burned.
    uint256 private _burnCounter;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to ownership details
    // An empty struct value does not necessarily mean the token is unowned.
    // See {_packedOwnershipOf} implementation for details.
    //
    // Bits Layout:
    // - [0..159]   `addr`
    // - [160..223] `startTimestamp`
    // - [224]      `burned`
    // - [225]      `nextInitialized`
    // - [232..255] `extraData`
    mapping(uint256 => uint256) private _packedOwnerships;

    // Mapping owner address to address data.
    //
    // Bits Layout:
    // - [0..63]    `balance`
    // - [64..127]  `numberMinted`
    // - [128..191] `numberBurned`
    // - [192..255] `aux`
    mapping(address => uint256) private _packedAddressData;

    // Mapping from token ID to approved address.
    mapping(uint256 => TokenApprovalRef) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) public _operatorApprovals;

    // =============================================================
    //                          CONSTRUCTOR
    // =============================================================

    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _currentIndex = _startTokenId();
    }

    // =============================================================
    //                   TOKEN COUNTING OPERATIONS
    // =============================================================

    /**
     * @dev Returns the starting token ID.
     * To change the starting token ID, please override this function.
     */
    function _startTokenId() internal view virtual returns (uint256) {
        return 1;
    }

    /**
     * @dev Returns the next token ID to be minted.
     */
    function _nextTokenId() internal view virtual returns (uint256) {
        return _currentIndex;
    }

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        // Counter underflow is impossible as _burnCounter cannot be incremented
        // more than `_currentIndex - _startTokenId()` times.
        unchecked {
            return _currentIndex - _burnCounter - _startTokenId();
        }
    }

    /**
     * @dev Returns the total amount of tokens minted in the contract.
     */
    function _totalMinted() internal view virtual returns (uint256) {
        // Counter underflow is impossible as `_currentIndex` does not decrement,
        // and it is initialized to `_startTokenId()`.
        unchecked {
            return _currentIndex - _startTokenId();
        }
    }

    /**
     * @dev Returns the total number of tokens burned.
     */
    function _totalBurned() internal view virtual returns (uint256) {
        return _burnCounter;
    }

    // =============================================================
    //                    ADDRESS DATA OPERATIONS
    // =============================================================

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        if (owner == address(0)) revert BalanceQueryForZeroAddress();
        return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens minted by `owner`.
     */
    function _numberMinted(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the number of tokens burned by or on behalf of `owner`.
     */
    function _numberBurned(address owner) internal view returns (uint256) {
        return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
    }

    /**
     * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     */
    function _getAux(address owner) internal view returns (uint64) {
        return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
    }

    /**
     * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
     * If there are multiple variables, please pack them into a uint64.
     */
    function _setAux(address owner, uint64 aux) internal virtual {
        uint256 packed = _packedAddressData[owner];
        uint256 auxCasted;
        // Cast `aux` with assembly to avoid redundant masking.
        assembly {
            auxCasted := aux
        }
        packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
        _packedAddressData[owner] = packed;
    }

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        // The interface IDs are constants representing the first 4 bytes
        // of the XOR of all function selectors in the interface.
        // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
        // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
        return
            interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
            interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
    }

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

        string memory baseURI = _baseURI();
        return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, it can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return '';
    }

    // =============================================================
    //                     OWNERSHIPS OPERATIONS
    // =============================================================

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        return address(uint160(_packedOwnershipOf(tokenId)));
    }

    /**
     * @dev Gas spent here starts off proportional to the maximum mint batch size.
     * It gradually moves to O(1) as tokens get transferred around over time.
     */
    function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnershipOf(tokenId));
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct at `index`.
     */
    function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
        return _unpackedOwnership(_packedOwnerships[index]);
    }

    /**
     * @dev Initializes the ownership slot minted at `index` for efficiency purposes.
     */
    function _initializeOwnershipAt(uint256 index) internal virtual {
        if (_packedOwnerships[index] == 0) {
            _packedOwnerships[index] = _packedOwnershipOf(index);
        }
    }

    /**
     * Returns the packed ownership data of `tokenId`.
     */
    function _packedOwnershipOf(uint256 tokenId) private view returns (uint256 packed) {
        if (_startTokenId() <= tokenId) {
            packed = _packedOwnerships[tokenId];
            // If not burned.
            if (packed & _BITMASK_BURNED == 0) {
                // If the data at the starting slot does not exist, start the scan.
                if (packed == 0) {
                    if (tokenId >= _currentIndex) revert OwnerQueryForNonexistentToken();
                    // Invariant:
                    // There will always be an initialized ownership slot
                    // (i.e. `ownership.addr != address(0) && ownership.burned == false`)
                    // before an unintialized ownership slot
                    // (i.e. `ownership.addr == address(0) && ownership.burned == false`)
                    // Hence, `tokenId` will not underflow.
                    //
                    // We can directly compare the packed value.
                    // If the address is zero, packed will be zero.
                    for (;;) {
                        unchecked {
                            packed = _packedOwnerships[--tokenId];
                        }
                        if (packed == 0) continue;
                        return packed;
                    }
                }
                // Otherwise, the data exists and is not burned. We can skip the scan.
                // This is possible because we have already achieved the target condition.
                // This saves 2143 gas on transfers of initialized tokens.
                return packed;
            }
        }
        revert OwnerQueryForNonexistentToken();
    }

    /**
     * @dev Returns the unpacked `TokenOwnership` struct from `packed`.
     */
    function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
        ownership.addr = address(uint160(packed));
        ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
        ownership.burned = packed & _BITMASK_BURNED != 0;
        ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
    }

    /**
     * @dev Packs ownership data into a single uint256.
     */
    function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
            result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
        }
    }

    /**
     * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
     */
    function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
        // For branchless setting of the `nextInitialized` flag.
        assembly {
            // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
            result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
        }
    }

    // =============================================================
    //                      APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account. See {ERC721A-_approve}.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     */
    function approve(address to, uint256 tokenId) public payable virtual override {
        _approve(to, tokenId, true);
    }

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

        return _tokenApprovals[tokenId].value;
    }

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _operatorApprovals[_msgSenderERC721A()][operator] = approved;
        emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
    }

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted. See {_mint}.
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return
            _startTokenId() <= tokenId &&
            tokenId < _currentIndex && // If within bounds,
            _packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
    }

    /**
     * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
     */
    function _isSenderApprovedOrOwner(
        address approvedAddress,
        address owner,
        address msgSender
    ) private pure returns (bool result) {
        assembly {
            // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
            owner := and(owner, _BITMASK_ADDRESS)
            // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
            msgSender := and(msgSender, _BITMASK_ADDRESS)
            // `msgSender == owner || msgSender == approvedAddress`.
            result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
        }
    }

    /**
     * @dev Returns the storage slot and value for the approved address of `tokenId`.
     */
    function _getApprovedSlotAndAddress(uint256 tokenId)
        private
        view
        returns (uint256 approvedAddressSlot, address approvedAddress)
    {
        TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
        // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
        assembly {
            approvedAddressSlot := tokenApproval.slot
            approvedAddress := sload(approvedAddressSlot)
        }
    }

    // =============================================================
    //                      TRANSFER OPERATIONS
    // =============================================================

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        // The nested ifs save around 20+ gas over a compound boolean condition.
        if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
            if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();

        if (to == address(0)) revert TransferToZeroAddress();

        _beforeTokenTransfers(from, to, tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // We can directly increment and decrement the balances.
            --_packedAddressData[from]; // Updates: `balance -= 1`.
            ++_packedAddressData[to]; // Updates: `balance += 1`.

            // Updates:
            // - `address` to the next owner.
            // - `startTimestamp` to the timestamp of transfering.
            // - `burned` to `false`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                to,
                _BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, to, tokenId);
        _afterTokenTransfers(from, to, tokenId, 1);
    }

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) public payable virtual override {
        safeTransferFrom(from, to, tokenId, '');
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) public payable virtual override {
        transferFrom(from, to, tokenId);
        if (to.code.length != 0)
            if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
                revert TransferToNonERC721ReceiverImplementer();
            }
    }

    /**
     * @dev Hook that is called before a set of serially-ordered token IDs
     * are about to be transferred. This includes minting.
     * And also called before burning one token.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _beforeTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Hook that is called after a set of serially-ordered token IDs
     * have been transferred. This includes minting.
     * And also called after one token has been burned.
     *
     * `startTokenId` - the first token ID to be transferred.
     * `quantity` - the amount to be transferred.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
     * transferred to `to`.
     * - When `from` is zero, `tokenId` has been minted for `to`.
     * - When `to` is zero, `tokenId` has been burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _afterTokenTransfers(
        address from,
        address to,
        uint256 startTokenId,
        uint256 quantity
    ) internal virtual {}

    /**
     * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
     *
     * `from` - Previous owner of the given token ID.
     * `to` - Target address that will receive the token.
     * `tokenId` - Token ID to be transferred.
     * `_data` - Optional data to send along with the call.
     *
     * Returns whether the call correctly returned the expected magic value.
     */
    function _checkContractOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory _data
    ) private returns (bool) {
        try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
            bytes4 retval
        ) {
            return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
        } catch (bytes memory reason) {
            if (reason.length == 0) {
                revert TransferToNonERC721ReceiverImplementer();
            } else {
                assembly {
                    revert(add(32, reason), mload(reason))
                }
            }
        }
    }

    // =============================================================
    //                        MINT OPERATIONS
    // =============================================================

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _mint(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (quantity == 0) revert MintZeroQuantity();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are incredibly unrealistic.
        // `balance` and `numberMinted` have a maximum limit of 2**64.
        // `tokenId` has a maximum limit of 2**256.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            uint256 toMasked;
            uint256 end = startTokenId + quantity;

            // Use assembly to loop and emit the `Transfer` event for gas savings.
            // The duplicated `log4` removes an extra check and reduces stack juggling.
            // The assembly, together with the surrounding Solidity code, have been
            // delicately arranged to nudge the compiler into producing optimized opcodes.
            assembly {
                // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
                toMasked := and(to, _BITMASK_ADDRESS)
                // Emit the `Transfer` event.
                log4(
                    0, // Start of data (0, since no data).
                    0, // End of data (0, since no data).
                    _TRANSFER_EVENT_SIGNATURE, // Signature.
                    0, // `address(0)`.
                    toMasked, // `to`.
                    startTokenId // `tokenId`.
                )

                // The `iszero(eq(,))` check ensures that large values of `quantity`
                // that overflows uint256 will make the loop run out of gas.
                // The compiler will optimize the `iszero` away for performance.
                for {
                    let tokenId := add(startTokenId, 1)
                } iszero(eq(tokenId, end)) {
                    tokenId := add(tokenId, 1)
                } {
                    // Emit the `Transfer` event. Similar to above.
                    log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
                }
            }
            if (toMasked == 0) revert MintToZeroAddress();

            _currentIndex = end;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Mints `quantity` tokens and transfers them to `to`.
     *
     * This function is intended for efficient minting only during contract creation.
     *
     * It emits only one {ConsecutiveTransfer} as defined in
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
     * instead of a sequence of {Transfer} event(s).
     *
     * Calling this function outside of contract creation WILL make your contract
     * non-compliant with the ERC721 standard.
     * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
     * {ConsecutiveTransfer} event is only permissible during contract creation.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `quantity` must be greater than 0.
     *
     * Emits a {ConsecutiveTransfer} event.
     */
    function _mintERC2309(address to, uint256 quantity) internal virtual {
        uint256 startTokenId = _currentIndex;
        if (to == address(0)) revert MintToZeroAddress();
        if (quantity == 0) revert MintZeroQuantity();
        if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();

        _beforeTokenTransfers(address(0), to, startTokenId, quantity);

        // Overflows are unrealistic due to the above check for `quantity` to be below the limit.
        unchecked {
            // Updates:
            // - `balance += quantity`.
            // - `numberMinted += quantity`.
            //
            // We can directly add to the `balance` and `numberMinted`.
            _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

            // Updates:
            // - `address` to the owner.
            // - `startTimestamp` to the timestamp of minting.
            // - `burned` to `false`.
            // - `nextInitialized` to `quantity == 1`.
            _packedOwnerships[startTokenId] = _packOwnershipData(
                to,
                _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
            );

            emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);

            _currentIndex = startTokenId + quantity;
        }
        _afterTokenTransfers(address(0), to, startTokenId, quantity);
    }

    /**
     * @dev Safely mints `quantity` tokens and transfers them to `to`.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
     * - `quantity` must be greater than 0.
     *
     * See {_mint}.
     *
     * Emits a {Transfer} event for each mint.
     */
    function _safeMint(
        address to,
        uint256 quantity,
        bytes memory _data
    ) internal virtual {
        _mint(to, quantity);

        unchecked {
            if (to.code.length != 0) {
                uint256 end = _currentIndex;
                uint256 index = end - quantity;
                do {
                    if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
                        revert TransferToNonERC721ReceiverImplementer();
                    }
                } while (index < end);
                // Reentrancy protection.
                if (_currentIndex != end) revert();
            }
        }
    }

    /**
     * @dev Equivalent to `_safeMint(to, quantity, '')`.
     */
    function _safeMint(address to, uint256 quantity) internal virtual {
        _safeMint(to, quantity, '');
    }

    // =============================================================
    //                       APPROVAL OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_approve(to, tokenId, false)`.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _approve(to, tokenId, false);
    }

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function _approve(
        address to,
        uint256 tokenId,
        bool approvalCheck
    ) internal virtual {
        address owner = ownerOf(tokenId);

        if (approvalCheck)
            if (_msgSenderERC721A() != owner)
                if (!isApprovedForAll(owner, _msgSenderERC721A())) {
                    revert ApprovalCallerNotOwnerNorApproved();
                }

        _tokenApprovals[tokenId].value = to;
        emit Approval(owner, to, tokenId);
    }

    // =============================================================
    //                        BURN OPERATIONS
    // =============================================================

    /**
     * @dev Equivalent to `_burn(tokenId, false)`.
     */
    function _burn(uint256 tokenId) internal virtual {
        _burn(tokenId, false);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
        uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

        address from = address(uint160(prevOwnershipPacked));

        (uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);

        if (approvalCheck) {
            // The nested ifs save around 20+ gas over a compound boolean condition.
            if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
                if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
        }

        _beforeTokenTransfers(from, address(0), tokenId, 1);

        // Clear approvals from the previous owner.
        assembly {
            if approvedAddress {
                // This is equivalent to `delete _tokenApprovals[tokenId]`.
                sstore(approvedAddressSlot, 0)
            }
        }

        // Underflow of the sender's balance is impossible because we check for
        // ownership above and the recipient's balance can't realistically overflow.
        // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
        unchecked {
            // Updates:
            // - `balance -= 1`.
            // - `numberBurned += 1`.
            //
            // We can directly decrement the balance, and increment the number burned.
            // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
            _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;

            // Updates:
            // - `address` to the last owner.
            // - `startTimestamp` to the timestamp of burning.
            // - `burned` to `true`.
            // - `nextInitialized` to `true`.
            _packedOwnerships[tokenId] = _packOwnershipData(
                from,
                (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
            );

            // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
            if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
                uint256 nextTokenId = tokenId + 1;
                // If the next slot's address is zero and not burned (i.e. packed value is zero).
                if (_packedOwnerships[nextTokenId] == 0) {
                    // If the next slot is within bounds.
                    if (nextTokenId != _currentIndex) {
                        // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
                        _packedOwnerships[nextTokenId] = prevOwnershipPacked;
                    }
                }
            }
        }

        emit Transfer(from, address(0), tokenId);
        _afterTokenTransfers(from, address(0), tokenId, 1);

        // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
        unchecked {
            _burnCounter++;
        }
    }

    // =============================================================
    //                     EXTRA DATA OPERATIONS
    // =============================================================

    /**
     * @dev Directly sets the extra data for the ownership data `index`.
     */
    function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
        uint256 packed = _packedOwnerships[index];
        if (packed == 0) revert OwnershipNotInitializedForExtraData();
        uint256 extraDataCasted;
        // Cast `extraData` with assembly to avoid redundant masking.
        assembly {
            extraDataCasted := extraData
        }
        packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
        _packedOwnerships[index] = packed;
    }

    /**
     * @dev Called during each token transfer to set the 24bit `extraData` field.
     * Intended to be overridden by the cosumer contract.
     *
     * `previousExtraData` - the value of `extraData` before transfer.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, `tokenId` will be burned by `from`.
     * - `from` and `to` are never both zero.
     */
    function _extraData(
        address from,
        address to,
        uint24 previousExtraData
    ) internal view virtual returns (uint24) {}

    /**
     * @dev Returns the next extra data for the packed ownership data.
     * The returned result is shifted into position.
     */
    function _nextExtraData(
        address from,
        address to,
        uint256 prevOwnershipPacked
    ) private view returns (uint256) {
        uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
        return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
    }

    // =============================================================
    //                       OTHER OPERATIONS
    // =============================================================

    /**
     * @dev Returns the message sender (defaults to `msg.sender`).
     *
     * If you are writing GSN compatible contracts, you need to override this function.
     */
    function _msgSenderERC721A() internal view virtual returns (address) {
        return msg.sender;
    }

    /**
     * @dev Converts a uint256 to its ASCII string decimal representation.
     */
    function _toString(uint256 value) internal pure virtual returns (string memory str) {
        assembly {
            // The maximum value of a uint256 contains 78 digits (1 byte per digit), but
            // we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
            // We will need 1 word for the trailing zeros padding, 1 word for the length,
            // and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
            let m := add(mload(0x40), 0xa0)
            // Update the free memory pointer to allocate.
            mstore(0x40, m)
            // Assign the `str` to the end.
            str := sub(m, 0x20)
            // Zeroize the slot after the string.
            mstore(str, 0)

            // Cache the end of the memory to calculate the length later.
            let end := str

            // We write the string from rightmost digit to leftmost digit.
            // The following is essentially a do-while loop that also handles the zero case.
            // prettier-ignore
            for { let temp := value } 1 {} {
                str := sub(str, 1)
                // Write the character to the pointer.
                // The ASCII index of the '0' character is 48.
                mstore8(str, add(48, mod(temp, 10)))
                // Keep dividing `temp` until zero.
                temp := div(temp, 10)
                // prettier-ignore
                if iszero(temp) { break }
            }

            let length := sub(end, str)
            // Move the pointer 32 bytes leftwards to make room for the length.
            str := sub(str, 0x20)
            // Store the length.
            mstore(str, length)
        }
    }
}

// File: contracts\OpenseaStandard\IOperatorFilterRegistry.sol


pragma solidity ^0.8.13;

interface IOperatorFilterRegistry {
    /**
     * @notice Returns true if operator is not filtered for a given token, either by address or codeHash. Also returns
     *         true if supplied registrant address is not registered.
     */
    function isOperatorAllowed(address registrant, address operator) external view returns (bool);

    /**
     * @notice Registers an address with the registry. May be called by address itself or by EIP-173 owner.
     */
    function register(address registrant) external;

    /**
     * @notice Registers an address with the registry and "subscribes" to another address's filtered operators and codeHashes.
     */
    function registerAndSubscribe(address registrant, address subscription) external;

    /**
     * @notice Registers an address with the registry and copies the filtered operators and codeHashes from another
     *         address without subscribing.
     */
    function registerAndCopyEntries(address registrant, address registrantToCopy) external;

    /**
     * @notice Unregisters an address with the registry and removes its subscription. May be called by address itself or by EIP-173 owner.
     *         Note that this does not remove any filtered addresses or codeHashes.
     *         Also note that any subscriptions to this registrant will still be active and follow the existing filtered addresses and codehashes.
     */
    function unregister(address addr) external;

    /**
     * @notice Update an operator address for a registered address - when filtered is true, the operator is filtered.
     */
    function updateOperator(address registrant, address operator, bool filtered) external;

    /**
     * @notice Update multiple operators for a registered address - when filtered is true, the operators will be filtered. Reverts on duplicates.
     */
    function updateOperators(address registrant, address[] calldata operators, bool filtered) external;

    /**
     * @notice Update a codeHash for a registered address - when filtered is true, the codeHash is filtered.
     */
    function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;

    /**
     * @notice Update multiple codeHashes for a registered address - when filtered is true, the codeHashes will be filtered. Reverts on duplicates.
     */
    function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;

    /**
     * @notice Subscribe an address to another registrant's filtered operators and codeHashes. Will remove previous
     *         subscription if present.
     *         Note that accounts with subscriptions may go on to subscribe to other accounts - in this case,
     *         subscriptions will not be forwarded. Instead the former subscription's existing entries will still be
     *         used.
     */
    function subscribe(address registrant, address registrantToSubscribe) external;

    /**
     * @notice Unsubscribe an address from its current subscribed registrant, and optionally copy its filtered operators and codeHashes.
     */
    function unsubscribe(address registrant, bool copyExistingEntries) external;

    /**
     * @notice Get the subscription address of a given registrant, if any.
     */
    function subscriptionOf(address addr) external returns (address registrant);

    /**
     * @notice Get the set of addresses subscribed to a given registrant.
     *         Note that order is not guaranteed as updates are made.
     */
    function subscribers(address registrant) external returns (address[] memory);

    /**
     * @notice Get the subscriber at a given index in the set of addresses subscribed to a given registrant.
     *         Note that order is not guaranteed as updates are made.
     */
    function subscriberAt(address registrant, uint256 index) external returns (address);

    /**
     * @notice Copy filtered operators and codeHashes from a different registrantToCopy to addr.
     */
    function copyEntriesOf(address registrant, address registrantToCopy) external;

    /**
     * @notice Returns true if operator is filtered by a given address or its subscription.
     */
    function isOperatorFiltered(address registrant, address operator) external returns (bool);

    /**
     * @notice Returns true if the hash of an address's code is filtered by a given address or its subscription.
     */
    function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);

    /**
     * @notice Returns true if a codeHash is filtered by a given address or its subscription.
     */
    function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);

    /**
     * @notice Returns a list of filtered operators for a given address or its subscription.
     */
    function filteredOperators(address addr) external returns (address[] memory);

    /**
     * @notice Returns the set of filtered codeHashes for a given address or its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredCodeHashes(address addr) external returns (bytes32[] memory);

    /**
     * @notice Returns the filtered operator at the given index of the set of filtered operators for a given address or
     *         its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredOperatorAt(address registrant, uint256 index) external returns (address);

    /**
     * @notice Returns the filtered codeHash at the given index of the list of filtered codeHashes for a given address or
     *         its subscription.
     *         Note that order is not guaranteed as updates are made.
     */
    function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);

    /**
     * @notice Returns true if an address has registered
     */
    function isRegistered(address addr) external returns (bool);

    /**
     * @dev Convenience method to compute the code hash of an arbitrary contract
     */
    function codeHashOf(address addr) external returns (bytes32);
}

// File: contracts\OpenseaStandard\lib\Constants.sol


pragma solidity ^0.8.13;

address constant CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS = 0x000000000000AAeB6D7670E522A718067333cd4E;
address constant CANONICAL_CORI_SUBSCRIPTION = 0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6;

// File: contracts\OpenseaStandard\OperatorFilterer.sol


pragma solidity ^0.8.13;


/**
 * @title  OperatorFilterer
 * @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another
 *         registrant's entries in the OperatorFilterRegistry.
 * @dev    This smart contract is meant to be inherited by token contracts so they can use the following:
 *         - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.
 *         - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.
 *         Please note that if your token contract does not provide an owner with EIP-173, it must provide
 *         administration methods on the contract itself to interact with the registry otherwise the subscription
 *         will be locked to the options set during construction.
 */

abstract contract OperatorFilterer {
    /// @dev Emitted when an operator is not allowed.
    error OperatorNotAllowed(address operator);

    IOperatorFilterRegistry public constant OPERATOR_FILTER_REGISTRY =
        IOperatorFilterRegistry(CANONICAL_OPERATOR_FILTER_REGISTRY_ADDRESS);

    /// @dev The constructor that is called when the contract is being deployed.
    constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {
        // If an inheriting token contract is deployed to a network without the registry deployed, the modifier
        // will not revert, but the contract will need to be registered with the registry once it is deployed in
        // order for the modifier to filter addresses.
        if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
            if (subscribe) {
                OPERATOR_FILTER_REGISTRY.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
            } else {
                if (subscriptionOrRegistrantToCopy != address(0)) {
                    OPERATOR_FILTER_REGISTRY.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
                } else {
                    OPERATOR_FILTER_REGISTRY.register(address(this));
                }
            }
        }
    }

    /**
     * @dev A helper function to check if an operator is allowed.
     */
    modifier onlyAllowedOperator(address from) virtual {
        // Allow spending tokens from addresses with balance
        // Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
        // from an EOA.
        if (from != msg.sender) {
            _checkFilterOperator(msg.sender);
        }
        _;
    }

    /**
     * @dev A helper function to check if an operator approval is allowed.
     */
    modifier onlyAllowedOperatorApproval(address operator) virtual {
        _checkFilterOperator(operator);
        _;
    }

    /**
     * @dev A helper function to check if an operator is allowed.
     */
    function _checkFilterOperator(address operator) internal view virtual {
        // Check registry code length to facilitate testing in environments without a deployed registry.
        if (address(OPERATOR_FILTER_REGISTRY).code.length > 0) {
            // under normal circumstances, this function will revert rather than return false, but inheriting contracts
            // may specify their own OperatorFilterRegistry implementations, which may behave differently
            if (!OPERATOR_FILTER_REGISTRY.isOperatorAllowed(address(this), operator)) {
                revert OperatorNotAllowed(operator);
            }
        }
    }
}

// File: contracts\OpenseaStandard\DefaultOperatorFilterer.sol


pragma solidity ^0.8.13;


/**
 * @title  DefaultOperatorFilterer
 * @notice Inherits from OperatorFilterer and automatically subscribes to the default OpenSea subscription.
 * @dev    Please note that if your token contract does not provide an owner with EIP-173, it must provide
 *         administration methods on the contract itself to interact with the registry otherwise the subscription
 *         will be locked to the options set during construction.
 */

abstract contract DefaultOperatorFilterer is OperatorFilterer {
    /// @dev The constructor that is called when the contract is being deployed.
    constructor() OperatorFilterer(CANONICAL_CORI_SUBSCRIPTION, true) {}
}

// File: contracts\NFTLimit.sol

pragma solidity ^0.8.13;
abstract contract NFTLimit is ERC721A, DefaultOperatorFilterer {

    mapping(address => bool) public isTransferAllowed;
    mapping(uint256 => bool) public nftLock;

     modifier  onlyTransferAllowed(address from) {
        require(isTransferAllowed[from],"ERC721: transfer not allowed");
        _;
    }

     modifier  isNFTLock(uint256 tokenId) {
        require(!nftLock[tokenId],"ERC721: NFT is locked");
        _;
    }

    function setApprovalForAll(address operator, bool approved) public override onlyAllowedOperatorApproval(operator)  {
        require(isTransferAllowed[operator],"ERC721: transfer not allowed");
        super.setApprovalForAll(operator, approved);
    }

     // OpenSea Enforcer functions
    function transferFrom(address from, address to, uint256 tokenId) public payable override onlyAllowedOperator(from)  {
        require(isTransferAllowed[msg.sender],"ERC721: transfer not allowed");
        require(!nftLock[tokenId],"ERC721: NFT is locked");
        super.transferFrom(from, to, tokenId);
    }

    function safeTransferFrom(address from, address to, uint256 tokenId) public payable override onlyAllowedOperator(from)   {
        require(isTransferAllowed[msg.sender],"ERC721: transfer not allowed");
        require(!nftLock[tokenId],"ERC721: NFT is locked");
        super.safeTransferFrom(from, to, tokenId);
    }

    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public payable override onlyAllowedOperator(from)  {
        require(isTransferAllowed[msg.sender],"ERC721: transfer not allowed");
        require(!nftLock[tokenId],"ERC721: NFT is locked");
        super.safeTransferFrom(from, to, tokenId, data);
    }

  
}

// File: contracts\CollectionProxy\CollectionStorage.sol

pragma solidity ^0.8.13;

contract CollectionStorage {

// Counters.Counter tokenIds;
string public baseURI;
mapping(address => bool) public _allowAddress;


 mapping(uint256 => bytes32) internal whiteListRoot;

 uint256 internal MaxSupply;

 uint256 public status;

 uint256 internal mainPrice;

 address internal seller;

 uint256 internal royalty;

uint256 public bundleId;
 uint256 public perPurchaseNFTToMint;

 

 uint256[] rarity;

 struct SaleDetail {
    uint256 startTime;
    uint256 endTime;
    uint256 price;
 }

 mapping (uint256=>SaleDetail) internal _saleDetails;
 mapping(address => mapping(uint256 => uint256)) internal userBought;
 mapping(uint256 => bool) internal isReserveWhitelist;
 mapping(uint256 => uint256) public reservedNFT;
 uint256 public perTransactionLimit;

}

// File: @openzeppelin\contracts\utils\Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: contracts\CollectionProxy\Ownable.sol



pragma solidity ^0.8.0;
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) internal {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin\contracts\utils\Strings.sol


// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// File: contracts\CollectionProxy\CollectionProxy.sol

pragma solidity ^0.8.13;
///////////////////////////////////////////////////////////////////////////////////////////////////
/**
 * @title ProxyReceiver Contract
 * @dev Handles forwarding calls to receiver delegates while offering transparency of updates.
 *      Follows ERC-1538 standard.
 *
 *    NOTE: Not recommended for direct use in a production contract, as no security control.
 *          Provided as simple example only.
 */
///////////////////////////////////////////////////////////////////////////////////////////////////

contract CollectionProxy is ProxyBaseStorage, IERC1538, NFTLimit, Ownable, CollectionStorage {
using Strings for uint256;

    constructor(address implementation)ERC721A("Breaking Down", "BDN") {

        proxy = address(this);
        _allowAddress[msg.sender] = true;
        baseURI = "https://testapi.xanalia.com/xanalia/get-nft-meta?tokenId=";
        MaxSupply = 100;
        //Adding ERC1538 updateContract function
        bytes memory signature = "updateContract(address,string,string)";
         constructorRegisterFunction(signature, proxy);
         bytes memory setBaseURISig = "setBaseURI(string)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "getUserBoughtCount(address,uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "isWhitelisted(address,bytes32[],uint256,uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "mint(address,uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setSeed(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "preOrder(bytes32[],uint256,uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "claim()";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "buy(bytes32[],uint256,bool,uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "burnAdmin(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setWhitelistRoot(bytes32,uint256,bool)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setAuthor(address)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setMaxSupply(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setStatus(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setTransferAllowed(address,bool)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setSaleDetails(uint256,uint256,uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setPerBundleNFTToMint(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setPerTransactionLimit(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "tokenURI(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setPrice(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "setRoyalty(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "getPrice()";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "getMaxSupply()";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "getAuthor(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "getRoyaltyFee(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "getCreator(uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
         setBaseURISig = "getSaleDetails(uint256)public view returns(uint256,uint256)";
         constructorRegisterFunction(setBaseURISig, implementation);
    }

     function constructorRegisterFunction(bytes memory signature, address proxy) internal {
        bytes4 funcId = bytes4(keccak256(signature));
        delegates[funcId] = proxy;
        funcSignatures.push(signature);
        funcSignatureToIndex[signature] = funcSignatures.length;
       
        emit FunctionUpdate(funcId, address(0), proxy, string(signature));
        
        emit CommitMessage("Added ERC1538 updateContract function at contract creation");
    }

    ///////////////////////////////////////////////////////////////////////////////////////////////

    fallback() external payable {
        if (msg.sig == bytes4(0) && msg.value != uint(0)) { // skipping ethers/BNB received to delegate
            return;
        }
        address delegate = delegates[msg.sig];
        require(delegate != address(0), "Function does not exist.");
        assembly {
            let ptr := mload(0x40)
            calldatacopy(ptr, 0, calldatasize())
            let result := delegatecall(gas(), delegate, ptr, calldatasize(), 0, 0)
            let size := returndatasize()
            returndatacopy(ptr, 0, size)
            switch result
            case 0 {revert(ptr, size)}
            default {return (ptr, size)}
        }
    }

    ///////////////////////////////////////////////////////////////////////////////////////////////

    /// @notice Updates functions in a transparent contract.
    /// @dev If the value of _delegate is zero then the functions specified
    ///  in _functionSignatures are removed.
    ///  If the value of _delegate is a delegate contract address then the functions
    ///  specified in _functionSignatures will be delegated to that address.
    /// @param _delegate The address of a delegate contract to delegate to or zero
    /// @param _functionSignatures A list of function signatures listed one after the other
    /// @param _commitMessage A short description of the change and why it is made
    ///        This message is passed to the CommitMessage event.
    function updateContract(address _delegate, string calldata _functionSignatures, string calldata _commitMessage) override onlyOwner external {
        // pos is first used to check the size of the delegate contract.
        // After that pos is the current memory location of _functionSignatures.
        // It is used to move through the characters of _functionSignatures
        uint256 pos;
        if(_delegate != address(0)) {
            assembly {
                pos := extcodesize(_delegate)
            }
            require(pos > 0, "_delegate address is not a contract and is not address(0)");
        }

        // creates a bytes version of _functionSignatures
        bytes memory signatures = bytes(_functionSignatures);
        // stores the position in memory where _functionSignatures ends.
        uint256 signaturesEnd;
        // stores the starting position of a function signature in _functionSignatures
        uint256 start;
        assembly {
            pos := add(signatures,32)
            start := pos
            signaturesEnd := add(pos,mload(signatures))
        }
        // the function id of the current function signature
        bytes4 funcId;
        // the delegate address that is being replaced or address(0) if removing functions
        address oldDelegate;
        // the length of the current function signature in _functionSignatures
        uint256 num;
        // the current character in _functionSignatures
        uint256 char;
        // the position of the current function signature in the funcSignatures array
        uint256 index;
        // the last position in the funcSignatures array
        uint256 lastIndex;
        // parse the _functionSignatures string and handle each function
        for (; pos < signaturesEnd; pos++) {
            assembly {char := byte(0,mload(pos))}
            // 0x29 == )
            if (char == 0x29) {
                pos++;
                num = (pos - start);
                start = pos;
                assembly {
                    mstore(signatures,num)
                }
                funcId = bytes4(keccak256(signatures));
                oldDelegate = delegates[funcId];
                if(_delegate == address(0)) {
                    index = funcSignatureToIndex[signatures];
                    require(index != 0, "Function does not exist.");
                    index--;
                    lastIndex = funcSignatures.length - 1;
                    if (index != lastIndex) {
                        funcSignatures[index] = funcSignatures[lastIndex];
                        funcSignatureToIndex[funcSignatures[lastIndex]] = index + 1;
                    }
                    funcSignatures.pop();
                    delete funcSignatureToIndex[signatures];
                    delete delegates[funcId];
                    emit FunctionUpdate(funcId, oldDelegate, address(0), string(signatures));
                }
                else if (funcSignatureToIndex[signatures] == 0) {
                    require(oldDelegate == address(0), "FuncId clash.");
                    delegates[funcId] = _delegate;
                    funcSignatures.push(signatures);
                    funcSignatureToIndex[signatures] = funcSignatures.length;
                    emit FunctionUpdate(funcId, address(0), _delegate, string(signatures));
                }
                else if (delegates[funcId] != _delegate) {
                    delegates[funcId] = _delegate;
                    emit FunctionUpdate(funcId, oldDelegate, _delegate, string(signatures));

                }
                assembly {signatures := add(signatures,num)}
            }
        }
        emit CommitMessage(_commitMessage);
    }

    function _baseURI() internal view virtual override returns (string memory) {
      return baseURI;
    }

 /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    ///////////////////////////////////////////////////////////////////////////////////////////////

}

///////////////////////////////////////////////////////////////////////////////////////////////////

{
  "compilationTarget": {
    "CollectionProxy.sol": "CollectionProxy"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}