// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

// ----------------------------------------------------------------------------
// BokkyPooBah's DateTime Library v1.01
//
// A gas-efficient Solidity date and time library
//
// https://github.com/bokkypoobah/BokkyPooBahsDateTimeLibrary
//
// Tested date range 1970/01/01 to 2345/12/31
//
// Conventions:
// Unit      | Range         | Notes
// :-------- |:-------------:|:-----
// timestamp | >= 0          | Unix timestamp, number of seconds since 1970/01/01 00:00:00 UTC
// year      | 1970 ... 2345 |
// month     | 1 ... 12      |
// day       | 1 ... 31      |
// hour      | 0 ... 23      |
// minute    | 0 ... 59      |
// second    | 0 ... 59      |
// dayOfWeek | 1 ... 7       | 1 = Monday, ..., 7 = Sunday
//
//
// Enjoy. (c) BokkyPooBah / Bok Consulting Pty Ltd 2018-2019. The MIT Licence.
// ----------------------------------------------------------------------------

library BokkyPooBahsDateTimeLibrary {
    uint256 constant SECONDS_PER_DAY = 24 * 60 * 60;
    uint256 constant SECONDS_PER_HOUR = 60 * 60;
    uint256 constant SECONDS_PER_MINUTE = 60;
    int256 constant OFFSET19700101 = 2440588;

    uint256 constant DOW_MON = 1;
    uint256 constant DOW_TUE = 2;
    uint256 constant DOW_WED = 3;
    uint256 constant DOW_THU = 4;
    uint256 constant DOW_FRI = 5;
    uint256 constant DOW_SAT = 6;
    uint256 constant DOW_SUN = 7;

    // ------------------------------------------------------------------------
    // Calculate the number of days from 1970/01/01 to year/month/day using
    // the date conversion algorithm from
    //   http://aa.usno.navy.mil/faq/docs/JD_Formula.php
    // and subtracting the offset 2440588 so that 1970/01/01 is day 0
    //
    // days = day
    //      - 32075
    //      + 1461 * (year + 4800 + (month - 14) / 12) / 4
    //      + 367 * (month - 2 - (month - 14) / 12 * 12) / 12
    //      - 3 * ((year + 4900 + (month - 14) / 12) / 100) / 4
    //      - offset
    // ------------------------------------------------------------------------
    function _daysFromDate(
        uint256 year,
        uint256 month,
        uint256 day
    ) internal pure returns (uint256 _days) {
        require(year >= 1970);
        int256 _year = int256(year);
        int256 _month = int256(month);
        int256 _day = int256(day);

        int256 __days =
            _day -
                32075 +
                (1461 * (_year + 4800 + (_month - 14) / 12)) /
                4 +
                (367 * (_month - 2 - ((_month - 14) / 12) * 12)) /
                12 -
                (3 * ((_year + 4900 + (_month - 14) / 12) / 100)) /
                4 -
                OFFSET19700101;

        _days = uint256(__days);
    }

    // ------------------------------------------------------------------------
    // Calculate year/month/day from the number of days since 1970/01/01 using
    // the date conversion algorithm from
    //   http://aa.usno.navy.mil/faq/docs/JD_Formula.php
    // and adding the offset 2440588 so that 1970/01/01 is day 0
    //
    // int L = days + 68569 + offset
    // int N = 4 * L / 146097
    // L = L - (146097 * N + 3) / 4
    // year = 4000 * (L + 1) / 1461001
    // L = L - 1461 * year / 4 + 31
    // month = 80 * L / 2447
    // dd = L - 2447 * month / 80
    // L = month / 11
    // month = month + 2 - 12 * L
    // year = 100 * (N - 49) + year + L
    // ------------------------------------------------------------------------
    function _daysToDate(uint256 _days)
        internal
        pure
        returns (
            uint256 year,
            uint256 month,
            uint256 day
        )
    {
        int256 __days = int256(_days);

        int256 L = __days + 68569 + OFFSET19700101;
        int256 N = (4 * L) / 146097;
        L = L - (146097 * N + 3) / 4;
        int256 _year = (4000 * (L + 1)) / 1461001;
        L = L - (1461 * _year) / 4 + 31;
        int256 _month = (80 * L) / 2447;
        int256 _day = L - (2447 * _month) / 80;
        L = _month / 11;
        _month = _month + 2 - 12 * L;
        _year = 100 * (N - 49) + _year + L;

        year = uint256(_year);
        month = uint256(_month);
        day = uint256(_day);
    }

    function timestampFromDate(
        uint256 year,
        uint256 month,
        uint256 day
    ) internal pure returns (uint256 timestamp) {
        timestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY;
    }

    function timestampFromDateTime(
        uint256 year,
        uint256 month,
        uint256 day,
        uint256 hour,
        uint256 minute,
        uint256 second
    ) internal pure returns (uint256 timestamp) {
        timestamp =
            _daysFromDate(year, month, day) *
            SECONDS_PER_DAY +
            hour *
            SECONDS_PER_HOUR +
            minute *
            SECONDS_PER_MINUTE +
            second;
    }

    function timestampToDate(uint256 timestamp)
        internal
        pure
        returns (
            uint256 year,
            uint256 month,
            uint256 day
        )
    {
        (year, month, day) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }

    function timestampToDateTime(uint256 timestamp)
        internal
        pure
        returns (
            uint256 year,
            uint256 month,
            uint256 day,
            uint256 hour,
            uint256 minute,
            uint256 second
        )
    {
        (year, month, day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        uint256 secs = timestamp % SECONDS_PER_DAY;
        hour = secs / SECONDS_PER_HOUR;
        secs = secs % SECONDS_PER_HOUR;
        minute = secs / SECONDS_PER_MINUTE;
        second = secs % SECONDS_PER_MINUTE;
    }

    function isValidDate(
        uint256 year,
        uint256 month,
        uint256 day
    ) internal pure returns (bool valid) {
        if (year >= 1970 && month > 0 && month <= 12) {
            uint256 daysInMonth = _getDaysInMonth(year, month);
            if (day > 0 && day <= daysInMonth) {
                valid = true;
            }
        }
    }

    function isValidDateTime(
        uint256 year,
        uint256 month,
        uint256 day,
        uint256 hour,
        uint256 minute,
        uint256 second
    ) internal pure returns (bool valid) {
        if (isValidDate(year, month, day)) {
            if (hour < 24 && minute < 60 && second < 60) {
                valid = true;
            }
        }
    }

    function isLeapYear(uint256 timestamp) internal pure returns (bool leapYear) {
        (uint256 year, , ) = _daysToDate(timestamp / SECONDS_PER_DAY);
        leapYear = _isLeapYear(year);
    }

    function _isLeapYear(uint256 year) internal pure returns (bool leapYear) {
        leapYear = ((year % 4 == 0) && (year % 100 != 0)) || (year % 400 == 0);
    }

    function isWeekDay(uint256 timestamp) internal pure returns (bool weekDay) {
        weekDay = getDayOfWeek(timestamp) <= DOW_FRI;
    }

    function isWeekEnd(uint256 timestamp) internal pure returns (bool weekEnd) {
        weekEnd = getDayOfWeek(timestamp) >= DOW_SAT;
    }

    function getDaysInMonth(uint256 timestamp) internal pure returns (uint256 daysInMonth) {
        (uint256 year, uint256 month, ) = _daysToDate(timestamp / SECONDS_PER_DAY);
        daysInMonth = _getDaysInMonth(year, month);
    }

    function _getDaysInMonth(uint256 year, uint256 month) internal pure returns (uint256 daysInMonth) {
        if (month == 1 || month == 3 || month == 5 || month == 7 || month == 8 || month == 10 || month == 12) {
            daysInMonth = 31;
        } else if (month != 2) {
            daysInMonth = 30;
        } else {
            daysInMonth = _isLeapYear(year) ? 29 : 28;
        }
    }

    // 1 = Monday, 7 = Sunday
    function getDayOfWeek(uint256 timestamp) internal pure returns (uint256 dayOfWeek) {
        uint256 _days = timestamp / SECONDS_PER_DAY;
        dayOfWeek = ((_days + 3) % 7) + 1;
    }

    function getYear(uint256 timestamp) internal pure returns (uint256 year) {
        (year, , ) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }

    function getMonth(uint256 timestamp) internal pure returns (uint256 month) {
        (, month, ) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }

    function getDay(uint256 timestamp) internal pure returns (uint256 day) {
        (, , day) = _daysToDate(timestamp / SECONDS_PER_DAY);
    }

    function getHour(uint256 timestamp) internal pure returns (uint256 hour) {
        uint256 secs = timestamp % SECONDS_PER_DAY;
        hour = secs / SECONDS_PER_HOUR;
    }

    function getMinute(uint256 timestamp) internal pure returns (uint256 minute) {
        uint256 secs = timestamp % SECONDS_PER_HOUR;
        minute = secs / SECONDS_PER_MINUTE;
    }

    function getSecond(uint256 timestamp) internal pure returns (uint256 second) {
        second = timestamp % SECONDS_PER_MINUTE;
    }

    function addYears(uint256 timestamp, uint256 _years) internal pure returns (uint256 newTimestamp) {
        (uint256 year, uint256 month, uint256 day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        year += _years;
        uint256 daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + (timestamp % SECONDS_PER_DAY);
        require(newTimestamp >= timestamp);
    }

    function addMonths(uint256 timestamp, uint256 _months) internal pure returns (uint256 newTimestamp) {
        (uint256 year, uint256 month, uint256 day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        month += _months;
        year += (month - 1) / 12;
        month = ((month - 1) % 12) + 1;
        uint256 daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + (timestamp % SECONDS_PER_DAY);
        require(newTimestamp >= timestamp);
    }

    function addDays(uint256 timestamp, uint256 _days) internal pure returns (uint256 newTimestamp) {
        newTimestamp = timestamp + _days * SECONDS_PER_DAY;
        require(newTimestamp >= timestamp);
    }

    function addHours(uint256 timestamp, uint256 _hours) internal pure returns (uint256 newTimestamp) {
        newTimestamp = timestamp + _hours * SECONDS_PER_HOUR;
        require(newTimestamp >= timestamp);
    }

    function addMinutes(uint256 timestamp, uint256 _minutes) internal pure returns (uint256 newTimestamp) {
        newTimestamp = timestamp + _minutes * SECONDS_PER_MINUTE;
        require(newTimestamp >= timestamp);
    }

    function addSeconds(uint256 timestamp, uint256 _seconds) internal pure returns (uint256 newTimestamp) {
        newTimestamp = timestamp + _seconds;
        require(newTimestamp >= timestamp);
    }

    function subYears(uint256 timestamp, uint256 _years) internal pure returns (uint256 newTimestamp) {
        (uint256 year, uint256 month, uint256 day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        year -= _years;
        uint256 daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + (timestamp % SECONDS_PER_DAY);
        require(newTimestamp <= timestamp);
    }

    function subMonths(uint256 timestamp, uint256 _months) internal pure returns (uint256 newTimestamp) {
        (uint256 year, uint256 month, uint256 day) = _daysToDate(timestamp / SECONDS_PER_DAY);
        uint256 yearMonth = year * 12 + (month - 1) - _months;
        year = yearMonth / 12;
        month = (yearMonth % 12) + 1;
        uint256 daysInMonth = _getDaysInMonth(year, month);
        if (day > daysInMonth) {
            day = daysInMonth;
        }
        newTimestamp = _daysFromDate(year, month, day) * SECONDS_PER_DAY + (timestamp % SECONDS_PER_DAY);
        require(newTimestamp <= timestamp);
    }

    function subDays(uint256 timestamp, uint256 _days) internal pure returns (uint256 newTimestamp) {
        newTimestamp = timestamp - _days * SECONDS_PER_DAY;
        require(newTimestamp <= timestamp);
    }

    function subHours(uint256 timestamp, uint256 _hours) internal pure returns (uint256 newTimestamp) {
        newTimestamp = timestamp - _hours * SECONDS_PER_HOUR;
        require(newTimestamp <= timestamp);
    }

    function subMinutes(uint256 timestamp, uint256 _minutes) internal pure returns (uint256 newTimestamp) {
        newTimestamp = timestamp - _minutes * SECONDS_PER_MINUTE;
        require(newTimestamp <= timestamp);
    }

    function subSeconds(uint256 timestamp, uint256 _seconds) internal pure returns (uint256 newTimestamp) {
        newTimestamp = timestamp - _seconds;
        require(newTimestamp <= timestamp);
    }

    function diffYears(uint256 fromTimestamp, uint256 toTimestamp) internal pure returns (uint256 _years) {
        require(fromTimestamp <= toTimestamp);
        (uint256 fromYear, , ) = _daysToDate(fromTimestamp / SECONDS_PER_DAY);
        (uint256 toYear, , ) = _daysToDate(toTimestamp / SECONDS_PER_DAY);
        _years = toYear - fromYear;
    }

    function diffMonths(uint256 fromTimestamp, uint256 toTimestamp) internal pure returns (uint256 _months) {
        require(fromTimestamp <= toTimestamp);
        (uint256 fromYear, uint256 fromMonth, ) = _daysToDate(fromTimestamp / SECONDS_PER_DAY);
        (uint256 toYear, uint256 toMonth, ) = _daysToDate(toTimestamp / SECONDS_PER_DAY);
        _months = toYear * 12 + toMonth - fromYear * 12 - fromMonth;
    }

    function diffDays(uint256 fromTimestamp, uint256 toTimestamp) internal pure returns (uint256 _days) {
        require(fromTimestamp <= toTimestamp);
        _days = (toTimestamp - fromTimestamp) / SECONDS_PER_DAY;
    }

    function diffHours(uint256 fromTimestamp, uint256 toTimestamp) internal pure returns (uint256 _hours) {
        require(fromTimestamp <= toTimestamp);
        _hours = (toTimestamp - fromTimestamp) / SECONDS_PER_HOUR;
    }

    function diffMinutes(uint256 fromTimestamp, uint256 toTimestamp) internal pure returns (uint256 _minutes) {
        require(fromTimestamp <= toTimestamp);
        _minutes = (toTimestamp - fromTimestamp) / SECONDS_PER_MINUTE;
    }

    function diffSeconds(uint256 fromTimestamp, uint256 toTimestamp) internal pure returns (uint256 _seconds) {
        require(fromTimestamp <= toTimestamp);
        _seconds = toTimestamp - fromTimestamp;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.7.4;

// import "hardhat/console.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./BokkyPooBahsDateTimeLibrary.sol";

contract DailyDistribution is Ownable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    event InvestorsAdded(address[] investors, uint256[] tokenAllocations, address caller);

    event InvestorAdded(address indexed investor, address indexed caller, uint256 allocation);

    event InvestorRemoved(address indexed investor, address indexed caller, uint256 allocation);

    event WithdrawnTokens(address indexed investor, uint256 value);

    event DepositInvestment(address indexed investor, uint256 value);

    event TransferInvestment(address indexed owner, uint256 value);

    event RecoverToken(address indexed token, uint256 indexed amount);

    uint256 private _totalAllocatedAmount;
    uint256 private _initialTimestamp;
    IERC20 private _mahaToken;
    address[] public investors;

    struct Investor {
        bool exists;
        uint256 withdrawnTokens;
        uint256 tokensAllotment;
    }

    mapping(address => Investor) public investorsInfo;

    /// @dev Boolean variable that indicates whether the contract was initialized.
    bool public isInitialized = false;
    /// @dev Boolean variable that indicates whether the investors set was finalized.
    bool public isFinalized = false;

    /// @dev Checks that the contract is initialized.
    modifier initialized() {
        require(isInitialized, "not initialized");
        _;
    }

    /// @dev Checks that the contract is initialized.
    modifier notInitialized() {
        require(!isInitialized, "initialized");
        _;
    }

    modifier onlyInvestor() {
        require(investorsInfo[_msgSender()].exists, "Only investors allowed");
        _;
    }

    constructor(address _token) public {
        _mahaToken = IERC20(_token);
    }

    function getInitialTimestamp() public view returns (uint256 timestamp) {
        return _initialTimestamp;
    }

    /// @dev release tokens to all the investors
    function releaseTokens() external onlyOwner initialized() {
        for (uint8 i = 0; i < investors.length; i++) {
            uint256 availableTokens = withdrawableTokens(investors[i]);
            _mahaToken.safeTransfer(investors[i], availableTokens);
        }
    }

    /// @dev Adds investors. This function doesn't limit max gas consumption,
    /// so adding too many investors can cause it to reach the out-of-gas error.
    /// @param _investors The addresses of new investors.
    /// @param _tokenAllocations The amounts of the tokens that belong to each investor.
    function addInvestors(address[] calldata _investors, uint256[] calldata _tokenAllocations) external onlyOwner {
        require(_investors.length == _tokenAllocations.length, "different arrays sizes");
        for (uint256 i = 0; i < _investors.length; i++) {
            _addInvestor(_investors[i], _tokenAllocations[i]);
        }
        emit InvestorsAdded(_investors, _tokenAllocations, msg.sender);
    }


    /// @dev Adds investor. This function doesn't limit max gas consumption,
    /// so adding too many investors can cause it to reach the out-of-gas error.
    /// @param _investor The addresses of new investors.
    /// @param _tokensAllotment The amounts of the tokens that belong to each investor.
    function _addInvestor(address _investor, uint256 _tokensAllotment) internal onlyOwner {
        require(_investor != address(0), "Invalid address");
        require(_tokensAllotment > 0, "the investor allocation must be more than 0");
        Investor storage investor = investorsInfo[_investor];

        require(investor.tokensAllotment == 0, "investor already added");

        investor.tokensAllotment = _tokensAllotment;
        investor.exists = true;
        investors.push(_investor);
        _totalAllocatedAmount = _totalAllocatedAmount.add(_tokensAllotment);
        emit InvestorAdded(_investor, _msgSender(), _tokensAllotment);
    }

    // 15% on listing and rest daily distribution from day 31 for 11 months (12 months)
    function withdrawTokens() external onlyInvestor() initialized() {
        Investor storage investor = investorsInfo[_msgSender()];

        uint256 tokensAvailable = withdrawableTokens(_msgSender());

        require(tokensAvailable > 0, "no tokens available for withdrawl");

        investor.withdrawnTokens = investor.withdrawnTokens.add(tokensAvailable);
        _mahaToken.safeTransfer(_msgSender(), tokensAvailable);

        emit WithdrawnTokens(_msgSender(), tokensAvailable);
    }

    /// @dev The starting time of TGE
    /// @param _timestamp The initial timestamp, this timestap should be used for vesting
    function setInitialTimestamp(uint256 _timestamp) external onlyOwner() notInitialized() {
        isInitialized = true;
        _initialTimestamp = _timestamp;
    }

    function withdrawableTokens(address _investor) public view returns (uint256 tokens) {
        Investor storage investor = investorsInfo[_investor];
        uint256 availablePercentage = _calculateAvailablePercentage();
        uint256 noOfTokens = _calculatePercentage(investor.tokensAllotment, availablePercentage);
        uint256 tokensAvailable = noOfTokens.sub(investor.withdrawnTokens);

        return tokensAvailable;
    }

    function _calculatePercentage(uint256 _amount, uint256 _percentage) private pure returns (uint256 percentage) {
        return _amount.mul(_percentage).div(100).div(1e18);
    }

    function _calculateAvailablePercentage() private view returns (uint256 availablePercentage) {
        // Daily distribution from day 1 for 10 months
        // 0.373134328% of tokens everyday
        // 1000000 MAHA assigned

        uint256 distroDuration = _initialTimestamp + 268 days;
        uint256 remainingDistroPercentage = 100;
        uint256 noOfRemaingDays = 268;
        uint256 everyDayReleasePercentage = remainingDistroPercentage.mul(1e18).div(noOfRemaingDays);
        // console.log("Every Day Release %: %s", everyDayReleasePercentage);

        uint256 currentTimeStamp = block.timestamp;

        if (currentTimeStamp > _initialTimestamp) {
            if (currentTimeStamp < distroDuration) {
                uint256 noOfDays = BokkyPooBahsDateTimeLibrary.diffDays(_initialTimestamp, currentTimeStamp);
                // console.log("Number of days: %s", noOfDays);
                uint256 currentUnlockedPercentage = noOfDays.mul(everyDayReleasePercentage);
                // console.log("Current Unlock %: %s", currentUnlockedPercentage);
                return currentUnlockedPercentage;
            } else {
                return uint256(100).mul(1e18);
            }
        } else {
            return uint256(0);
        }
    }

    function recoverToken(address _token, uint256 _amount) external onlyOwner {
        IERC20(_token).safeTransfer(_msgSender(), _amount);
        emit RecoverToken(_token, _amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

{
  "compilationTarget": {
    "contracts/DailyDistribution.sol": "DailyDistribution"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}