// File: @openzeppelin/contracts/math/SafeMath.sol

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/cryptography/ECDSA.sol

pragma solidity ^0.6.0;

/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        // Check the signature length
        if (signature.length != 65) {
            revert("ECDSA: invalid signature length");
        }

        // Divide the signature in r, s and v variables
        bytes32 r;
        bytes32 s;
        uint8 v;

        // ecrecover takes the signature parameters, and the only way to get them
        // currently is to use assembly.
        // solhint-disable-next-line no-inline-assembly
        assembly {
            r := mload(add(signature, 0x20))
            s := mload(add(signature, 0x40))
            v := byte(0, mload(add(signature, 0x60)))
        }

        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            revert("ECDSA: invalid signature 's' value");
        }

        if (v != 27 && v != 28) {
            revert("ECDSA: invalid signature 'v' value");
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        require(signer != address(0), "ECDSA: invalid signature");

        return signer;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * replicates the behavior of the
     * https://github.com/ethereum/wiki/wiki/JSON-RPC#eth_sign[`eth_sign`]
     * JSON-RPC method.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
    }
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(account) }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
}

// File: @openzeppelin/contracts/GSN/Context.sol

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
contract Context {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.
    constructor () internal { }

    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.6.0;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20MinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// File: contracts/ERC865Plus677ish.sol

pragma solidity >=0.6.0  <0.7.0;
/**
 * @title ERC677 transferAndCall token interface
 * @dev See https://github.com/ethereum/EIPs/issues/677 for specification and
 *      discussion.
 *
 * We deviate from the specification and we don't define a tokenfallback. That means
 * tranferAndCall can specify the function to call (bytes4(sha3("setN(uint256)")))
 * and its arguments, and the respective function is called.
 *
 * If an invalid function is called, its default function (if implemented) is called.
 *
 * We also deviate from ERC865 and added a pre signed transaction for transferAndCall.
 */

/*
 Notes on signature malleability: Ethereum took the same
 precaution as in bitcoin was used to prevent that:

 https://github.com/ethereum/go-ethereum/blob/master/vendor/github.com/btcsuite/btcd/btcec/signature.go#L48
 https://github.com/ethereum/go-ethereum/blob/master/crypto/signature_test.go
 https://github.com/ethereum/EIPs/blob/master/EIPS/eip-155.md
 https://github.com/ethereum/EIPs/blob/master/EIPS/eip-2.md

 However, ecrecover still allows ambigous signatures. Thus, recover that wraps ecrecover checks for ambigous
 signatures and only allows unique signatures.
*/

abstract contract ERC865Plus677ish {
    event TransferAndCall(address indexed _from, address indexed _to, uint256 _value, bytes4 _methodName, bytes _args);
    function transferAndCall(address _to, uint256 _value, bytes4 _methodName, bytes memory _args) public virtual returns (bool);

    event TransferPreSigned(address indexed _from, address indexed _to, address indexed _delegate,
        uint256 _amount, uint256 _fee);
    event TransferAndCallPreSigned(address indexed _from, address indexed _to, address indexed _delegate,
        uint256 _amount, uint256 _fee, bytes4 _methodName, bytes _args);

    function transferPreSigned(bytes memory _signature, address _from, address _to, uint256 _value,
        uint256 _fee, uint256 _nonce) public virtual returns (bool);
    function transferAndCallPreSigned(bytes memory _signature, address _from, address _to, uint256 _value,
        uint256 _fee, uint256 _nonce, bytes4 _methodName, bytes memory _args) public virtual returns (bool);
}

// File: contracts/BaseToken.sol

pragma solidity >=0.6.0  <0.7.0;






abstract contract Basetoken is ERC20, ERC865Plus677ish {

    using SafeMath for uint256;
    using ECDSA for bytes32;
    using Address for address;

    /**
    * Events
    */


    event MyLog( address indexed _from, uint256 _value);


    // ownership
    address public owner;
    uint8 private _decimals;

    // nonces of transfers performed
    mapping(bytes => bool) signatures;



    constructor(string memory name, string memory symbol ) ERC20(name, symbol) public {
        owner = msg.sender;
    }

    //**************** OVERRIDE ERC20 *******************************************************************************************
    /**
     * @dev Allows the current owner to transfer the ownership.
     * @param _newOwner The address to transfer ownership to.
     */
    function transferOwnership(address _newOwner) public onlyOwner {
        require(owner == msg.sender,'Only owner can transfer the ownership');
        owner = _newOwner;
    }


    /**
     * Minting functionality to multiples recipients
     */
    function mint(address[] memory _recipients, uint256[] memory _amounts) public onlyOwner  {
        require(owner == msg.sender,'Only owner can add new tokens');
        require(_recipients.length == _amounts.length,'Invalid size of recipients|amount');
        require(_recipients.length <= 10,'Only allow mint 10 recipients');

        for (uint8 i = 0; i < _recipients.length; i++) {
            address recipient = _recipients[i];
            uint256 amount = _amounts[i];

            _mint(recipient, amount);
        }
    }






    function doTransfer(address _from, address _to, uint256 _value, uint256 _fee, address _feeAddress) internal {
        emit MyLog(_from,  _value);

        require(_to != address(0),'Invalid recipient address');

        uint256 total = _value.add(_fee);
        require(total <= balanceOf(_from),'Insufficient funds');


        emit MyLog(_from, _value);
        myTransferFrom(_from,_to,_value);

        //Agregar el fee a la address fee
        if(_fee > 0 && _feeAddress != address(0)) {
            myTransferFrom(_from,_feeAddress,_fee);

        }


    }

    /**
      * @dev See {IERC20-transferFrom}.
      *
      * Emits an {Approval} event indicating the updated allowance. This is not
      * required by the EIP. See the note at the beginning of {ERC20};
      *
      * Requirements:
      * - `sender` and `recipient` cannot be the zero address.
      * - `sender` must have a balance of at least `amount`.
      * - the caller must have allowance for ``sender``'s tokens of at least
      * `amount`.
      */
    function myTransferFrom(address from, address to, uint256 amount) public onlyOwner returns (bool) {
        _transfer(from, to, amount);
        //Check if allow use amount to spent
        uint256 allowed= allowance(msg.sender, from);
        uint256 diff=allowed.sub(amount);
        _approve(from, msg.sender, diff);
        return true;
    }



    //**************** END OVERRIDE ERC20 *******************************************************************************************






    //**************** FROM ERC865 *******************************************************************************************
    function transferAndCall(address _to, uint256 _value, bytes4 _methodName, bytes memory _args) public override returns (bool) {
        require(transferFromSender(_to, _value),'Invalid transfer from sender');

        emit TransferAndCall(msg.sender, _to, _value, _methodName, _args);

        // call receiver
        require(Address.isContract(_to),'Address is not contract');

        (bool success, ) = _to.call(abi.encodePacked(abi.encodeWithSelector(_methodName, msg.sender, _value), _args));
        require(success, 'Transfer unsuccesfully');
        return success;
    }

    //ERC 865 + delegate transfer and call
    function transferPreSigned(bytes memory _signature, address _from, address _to, uint256 _value, uint256 _fee, uint256 _nonce) public override returns (bool) {

        require(!signatures[_signature],'Signature already used');

        bytes32 hashedTx = transferPreSignedHashing(address(this), _to, _value, _fee, _nonce);

        address from = ECDSA.recover(hashedTx, _signature);

        //if hashedTx does not fit to _signature Utils.recover resp. Solidity's ecrecover returns another (random) address,
        //if this returned address does have enough tokens, they would be transferred, therefor we check if the retrieved
        //signature is equal the specified one
        require(from == _from,'Invalid sender1');
        require(from != address(0),'Invalid sender address');



        doTransfer(from, _to, _value, _fee, msg.sender);
        signatures[_signature] = true;


        emit TransferPreSigned(from, _to, msg.sender, _value, _fee);
        return true;
    }


    function transferAndCallPreSigned(bytes memory _signature, address _from, address _to, uint256 _value, uint256 _fee, uint256 _nonce,
        bytes4 _methodName, bytes memory _args) public override returns (bool) {

        require(!signatures[_signature],'Signature already used');

        bytes32 hashedTx = transferAndCallPreSignedHashing(address(this), _to, _value, _fee, _nonce, _methodName, _args);
        address from = ECDSA.recover(hashedTx, _signature);

        /**
        *if hashedTx does not fit to _signature Utils.recover resp. Solidity's ecrecover returns another (random) address,
        *if this returned address does have enough tokens, they would be transferred, therefor we check if the retrieved
        *signature is equal the specified one
        **/
        require(from == _from,'Invalid sender');
        require(from != address(0),'Invalid sender address');

        doTransfer(from, _to, _value, _fee, msg.sender);
        signatures[_signature] = true;


        emit TransferAndCallPreSigned(from, _to, msg.sender, _value, _fee, _methodName, _args);

        // call receiver
        require(Address.isContract(_to),'Address is not contract');

        //call on behalf of from and not msg.sender
        (bool success, ) = _to.call(abi.encodePacked(abi.encodeWithSelector(_methodName, from, _value), _args));
        require(success);
        return success;
    }

    //**************** END FROM ERC865 *******************************************************************************************







    //*****************************UTILS FUNCTIONS****************************************************************
    /**
     * From: https://github.com/PROPSProject/props-token-distribution/blob/master/contracts/token/ERC865Token.sol
     * adapted to: https://solidity.readthedocs.io/en/v0.5.3/050-breaking-changes.html?highlight=abi%20encode
     * @notice Hash (keccak256) of the payload used by transferPreSigned
     * @param _token address The address of the token.
     * @param _to address The address which you want to transfer to.
     * @param _value uint256 The amount of tokens to be transferred.
     * @param _fee uint256 The amount of tokens paid to msg.sender, by the owner.
     */
    function transferAndCallPreSignedHashing(address _token, address _to, uint256 _value, uint256 _fee, uint256 _nonce,
        bytes4 _methodName, bytes memory _args) internal pure returns (bytes32) {
        /* "38980f82": transferAndCallPreSignedHashing(address,address,uint256,uint256,uint256,bytes4,bytes) */
        return keccak256(abi.encode(bytes4(0x38980f82), _token, _to, _value, _fee, _nonce, _methodName, _args));
    }

    function transferPreSignedHashing(address _token, address _to, uint256 _value, uint256 _fee, uint256 _nonce)
    internal pure returns (bytes32) {
        /* "15420b71": transferPreSignedHashing(address,address,uint256,uint256,uint256) */
        return keccak256(abi.encode(bytes4(0x15420b71), _token, _to, _value, _fee, _nonce));
    }


    function transferFromSender(address _to, uint256 _value) private returns (bool) {
        doTransfer(msg.sender, _to, _value, 0, address(0));
        return true;
    }

    modifier onlyOwner() {
        require(msg.sender == owner, "Access denied");
        _;
    }


    //*****************************END UTILS FUNCTIONS**********************************************************

}

// File: contracts/ARSCB.sol

pragma solidity >=0.6.0  <0.7.0;


contract ARSCB is Basetoken{

    constructor() Basetoken("Pesos Argentinos", "ARSCB") public{

    }
}

{
  "compilationTarget": {
    "ARSCB.sol": "ARSCB"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}