// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.11;

interface IUniFactory {
    function createPair(address tokenA, address tokenB) external returns (address pair);
    function getPair(address tokenA, address tokenB) external returns (address pair);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.11;

interface IUniRouter {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);

    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `+` operator.
   *
   * Requirements:
   * - Addition cannot overflow.
   */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   * - Subtraction cannot overflow.
   */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   * - Subtraction cannot overflow.
   */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `*` operator.
   *
   * Requirements:
   * - Multiplication cannot overflow.
   */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * Reverts when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * Reverts with custom message when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   * - The divisor cannot be zero.
   */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.11;

import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeMath} from "./libraries/SafeMath.sol";
import {IUniRouter} from "./interfaces/IUniRouter.sol";
import {IUniFactory} from "./interfaces/IUniFactory.sol";

contract WrappedTradeAI  is Ownable, IERC20 {
    using SafeMath for uint256;

    uint256 _totalSupply = 21000000 * 10 ** _decimals;
    address WETH;
    address constant DEAD = 0x000000000000000000000000000000000000dEaD;
    address constant ZERO = 0x0000000000000000000000000000000000000000;

    // Token info
    string constant _name = "Wrapped Trade AI";
    string constant _symbol = "wTAI";
    uint8 constant _decimals = 18;

    uint256 setRatio = 30;
    uint256 setRatioDenominator = 100;

    mapping(address => uint256) _balances;
    mapping(address => mapping(address => uint256)) _allowances;
    mapping(address => bool) isNotABot;
    mapping(address => bool) isExemptFromFees;

    uint256 public teamFee = 400; // 2%
    uint256 public holderFee = 600; // 3%
    uint256 public sellPercent = 400; // 40% for start listing
    uint256 public buyPercent = 400; // 40% for start listing
    uint256 public liquidityFee = 0;

    uint256 public transferPercent = 0;
    uint256 public totalFee = liquidityFee + teamFee + holderFee;
    uint256 public feeDenominator = 1000;

    IUniRouter public router = IUniRouter(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);

    address public autoLiquidityReceiver;
    address public teamFeeReceiver = 0x34387FCfc571C928B9C322CF59d8a0EDcBe8118A;
    address public holderFeeReceiver = 0x620b70964eb92990600aD3082253D0276CD57138;

    address public pair;
    bool public swapEnabled = true;
    uint256 public swapThreshold = _totalSupply / 1000;
    bool inSwap;

    modifier swapping() {
        inSwap = true;
        _;
        inSwap = false;
    }

    event AutoAddLiquify(uint256 amountETH, uint256 amountTokens);
    event UpdateTax(uint8 Buy, uint8 Sell, uint8 Transfer);
    event ClearToken(address TokenAddressCleared, uint256 Amount);
    event SetReceivers(address autoLiquidityReceiver, address teamFee, address holderFee);
    event UpdateMaxWallet(uint256 maxWallet);
    event UpdateSwapBackSetting(uint256 Amount, bool Enabled);

    constructor () {
        WETH = router.WETH();
        _allowances[address(this)][address(router)] = type(uint256).max;

        autoLiquidityReceiver = msg.sender;

        isExemptFromFees[msg.sender] = true;
        isNotABot[msg.sender] = true;

        _balances[msg.sender] = _totalSupply;
        emit Transfer(address(0), msg.sender, _totalSupply);
    }

    receive() external payable {}

    function totalSupply() external view override returns (uint256) {return _totalSupply;}
    function decimals() external pure returns (uint8) {return _decimals;}
    function symbol() external pure returns (string memory) {return _symbol;}
    function name() external pure returns (string memory) {return _name;}
    function getOwner() external view returns (address) {return owner();}
    function balanceOf(address account) public view override returns (uint256) {return _balances[account];}
    function allowance(address holder, address spender) external view override returns (uint256) {return _allowances[holder][spender];}

    function checkRatio(uint256 ratio, uint256 accuracy) public view returns (bool) {
        return showBacking(accuracy) > ratio;
    }

    function showBacking(uint256 accuracy) public view returns (uint256) {
        return accuracy.mul(balanceOf(pair).mul(2)).div(showSupply());
    }

    function showSupply() public view returns (uint256) {
        return _totalSupply.sub(balanceOf(DEAD)).sub(balanceOf(ZERO));
    }

    function approve(address spender, uint256 amount) public override returns (bool) {
        _allowances[msg.sender][spender] = amount;
        emit Approval(msg.sender, spender, amount);
        return true;
    }

    function approveMax(address spender) external returns (bool) {
        return approve(spender, type(uint256).max);
    }

    function transfer(address recipient, uint256 amount) external override returns (bool) {
        return _transferFrom(msg.sender, recipient, amount);
    }

    function transferFrom(address sender, address recipient, uint256 amount) external override returns (bool) {
        if (_allowances[sender][msg.sender] != type(uint256).max) {
            _allowances[sender][msg.sender] = _allowances[sender][msg.sender].sub(amount, "Insufficient Allowance");
        }

        return _transferFrom(sender, recipient, amount);
    }

    function manualSend() external {
        payable(autoLiquidityReceiver).transfer(address(this).balance);
    }

    function _transferFrom(address sender, address recipient, uint256 amount) internal returns (bool) {
        if (inSwap) {return _basicTransfer(sender, recipient, amount);}

        if (_shouldSwapBack()) {
            _swapBack();
        }

        _balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");

        uint256 amountReceived = (isExemptFromFees[sender] || isExemptFromFees[recipient]) ? amount : _takeFee(sender, amount, recipient);

        _balances[recipient] = _balances[recipient].add(amountReceived);

        emit Transfer(sender, recipient, amountReceived);
        return true;
    }

    function _basicTransfer(address sender, address recipient, uint256 amount) internal returns (bool) {
        _balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
        return true;
    }

    function _shouldTakeFee(address sender) internal view returns (bool) {
        return !isExemptFromFees[sender];
    }

    function _takeFee(address sender, uint256 amount, address recipient) internal returns (uint256) {
        uint256 percent = transferPercent;
        if (recipient == pair) {
            percent = sellPercent;
        } else if (sender == pair) {
            percent = buyPercent;
        }

        uint256 feeAmount = amount.mul(totalFee).mul(percent).div(feeDenominator * 1000);
        _balances[address(this)] = _balances[address(this)].add(feeAmount);

        emit Transfer(sender, address(this), feeAmount);

        return amount.sub(feeAmount);
    }

    function _shouldSwapBack() internal view returns (bool) {
        return msg.sender != pair
            && !inSwap
            && swapEnabled
            && _balances[address(this)] >= swapThreshold;
    }

    function _swapBack() internal swapping {
        uint256 dynamicLiquidityFee = checkRatio(setRatio, setRatioDenominator) ? 0 : liquidityFee;
        uint256 amountToLiquify = swapThreshold.mul(dynamicLiquidityFee).div(totalFee).div(2);
        uint256 amountToSwap = swapThreshold.sub(amountToLiquify);

        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = WETH;

        uint256 balanceBefore = address(this).balance;

        router.swapExactTokensForETHSupportingFeeOnTransferTokens(
            amountToSwap,
            0,
            path,
            address(this),
            block.timestamp
        );

        uint256 amountETH = address(this).balance.sub(balanceBefore);

        uint256 totalETHFee = totalFee.sub(dynamicLiquidityFee.div(2));

        uint256 amountETHLiquidity = amountETH.mul(dynamicLiquidityFee).div(totalETHFee).div(2);
        uint256 amountETHTeam = amountETH.mul(teamFee).div(totalETHFee);
        uint256 amountETHbuykeys = amountETH.mul(holderFee).div(totalETHFee);

        (bool tmpSuccess,) = payable(teamFeeReceiver).call{value: amountETHTeam}("");
        (tmpSuccess,) = payable(holderFeeReceiver).call{value: amountETHbuykeys}("");

        tmpSuccess = false;

        if (amountToLiquify > 0) {
            router.addLiquidityETH{value: amountETHLiquidity}(
                address(this),
                amountToLiquify,
                0,
                0,
                autoLiquidityReceiver,
                block.timestamp
            );
            emit AutoAddLiquify(amountETHLiquidity, amountToLiquify);
        }
    }

    function clearStuckToken(address tokenAddress, uint256 tokens) external onlyOwner returns (bool success) {
        if (tokens == 0) {
            tokens = IERC20(tokenAddress).balanceOf(address(this));
        }

        emit ClearToken(tokenAddress, tokens);
        return IERC20(tokenAddress).transfer(autoLiquidityReceiver, tokens);
    }

    function setFeesBuySellTransfer(uint256 _percentOnBuy, uint256 _percentOnSell, uint256 _walletTransfer) external onlyOwner {
        sellPercent = _percentOnSell;
        buyPercent = _percentOnBuy;
        transferPercent = _walletTransfer;
    }

    function _setFees() internal {
        emit UpdateTax(uint8(totalFee.mul(buyPercent).div(feeDenominator)),
            uint8(totalFee.mul(sellPercent).div(feeDenominator)),
            uint8(totalFee.mul(transferPercent).div(feeDenominator))
        );
    }

    function setParameters(uint256 _liquidityFee, uint256 _teamFee, uint256 _holderFee, uint256 _feeDenominator) external onlyOwner {
        liquidityFee = _liquidityFee;
        teamFee = _teamFee;
        holderFee = _holderFee;

        totalFee = _liquidityFee.add(_teamFee).add(_holderFee);
        feeDenominator = _feeDenominator;
        _setFees();
    }

    function setWallets(address _autoLiquidityReceiver, address _teamFeeReceiver, address _holderFeeReceiver) external onlyOwner {
        autoLiquidityReceiver = _autoLiquidityReceiver;
        teamFeeReceiver = _teamFeeReceiver;
        holderFeeReceiver = _holderFeeReceiver;

        emit SetReceivers(autoLiquidityReceiver, teamFeeReceiver, holderFeeReceiver);
    }

    function setSwapBackSettings(bool _enabled, uint256 _amount) external onlyOwner {
        swapEnabled = _enabled;
        swapThreshold = _amount;
        emit UpdateSwapBackSetting(swapThreshold, swapEnabled);
    }

    function setNotBot(address[] calldata accounts, bool excluded) public onlyOwner {
        for (uint256 i = 0; i < accounts.length; i++) {
            isNotABot[accounts[i]] = excluded;
        }
    }

    function setExemptFees(address[] calldata accounts, bool excluded) external onlyOwner {
        for (uint256 i = 0; i < accounts.length; i++) {
            isExemptFromFees[accounts[i]] = excluded;
        }
    }

    function updatePair() external onlyOwner {
        pair = IUniFactory(router.factory()).getPair(WETH, address(this));
    }
}

{
  "compilationTarget": {
    "contracts/WrappedTradeAI.sol": "WrappedTradeAI"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 256
  },
  "remappings": []
}