// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes calldata) {
    return msg.data;
  }
}

// File: @openzeppelin/contracts/access/Ownable.sol

// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.9;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
  address private _owner;

  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );

  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
   */
  constructor() {
    _transferOwnership(_msgSender());
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    _checkOwner();
    _;
  }

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view virtual returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if the sender is not the owner.
   */
  function _checkOwner() internal view virtual {
    require(owner() == _msgSender(), "Ownable: caller is not the owner");
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions anymore. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby removing any functionality that is only available to the owner.
   */
  function renounceOwnership() public virtual onlyOwner {
    _transferOwnership(address(0));
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    require(newOwner != address(0), "Ownable: new owner is the zero address");
    _transferOwnership(newOwner);
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Internal function without access restriction.
   */
  function _transferOwnership(address newOwner) internal virtual {
    address oldOwner = _owner;
    _owner = newOwner;
    emit OwnershipTransferred(oldOwner, newOwner);
  }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.9;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);

  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `to`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address to, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(
    address owner,
    address spender
  ) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `from` to `to` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address from,
    address to,
    uint256 amount
  ) external returns (bool);
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.9;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
  /**
   * @dev Returns the name of the token.
   */
  function name() external view returns (string memory);

  /**
   * @dev Returns the symbol of the token.
   */
  function symbol() external view returns (string memory);

  /**
   * @dev Returns the decimals places of the token.
   */
  function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol

// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.9;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
  mapping(address => uint256) private _balances;

  mapping(address => mapping(address => uint256)) private _allowances;

  uint256 private _totalSupply;

  string private _name;
  string private _symbol;

  /**
   * @dev Sets the values for {name} and {symbol}.
   *
   * The default value of {decimals} is 18. To select a different value for
   * {decimals} you should overload it.
   *
   * All two of these values are immutable: they can only be set once during
   * construction.
   */
  constructor(string memory name_, string memory symbol_) {
    _name = name_;
    _symbol = symbol_;
  }

  /**
   * @dev Returns the name of the token.
   */
  function name() public view virtual override returns (string memory) {
    return _name;
  }

  /**
   * @dev Returns the symbol of the token, usually a shorter version of the
   * name.
   */
  function symbol() public view virtual override returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Returns the number of decimals used to get its user representation.
   * For example, if `decimals` equals `2`, a balance of `505` tokens should
   * be displayed to a user as `5.05` (`505 / 10 ** 2`).
   *
   * Tokens usually opt for a value of 18, imitating the relationship between
   * Ether and Wei. This is the value {ERC20} uses, unless this function is
   * overridden;
   *
   * NOTE: This information is only used for _display_ purposes: it in
   * no way affects any of the arithmetic of the contract, including
   * {IERC20-balanceOf} and {IERC20-transfer}.
   */
  function decimals() public view virtual override returns (uint8) {
    return 18;
  }

  /**
   * @dev See {IERC20-totalSupply}.
   */
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }

  /**
   * @dev See {IERC20-balanceOf}.
   */
  function balanceOf(
    address account
  ) public view virtual override returns (uint256) {
    return _balances[account];
  }

  /**
   * @dev See {IERC20-transfer}.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - the caller must have a balance of at least `amount`.
   */
  function transfer(
    address to,
    uint256 amount
  ) public virtual override returns (bool) {
    address owner = _msgSender();
    _transfer(owner, to, amount);
    return true;
  }

  /**
   * @dev See {IERC20-allowance}.
   */
  function allowance(
    address owner,
    address spender
  ) public view virtual override returns (uint256) {
    return _allowances[owner][spender];
  }

  /**
   * @dev See {IERC20-approve}.
   *
   * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
   * `transferFrom`. This is semantically equivalent to an infinite approval.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function approve(
    address spender,
    uint256 amount
  ) public virtual override returns (bool) {
    address owner = _msgSender();
    _approve(owner, spender, amount);
    return true;
  }

  /**
   * @dev See {IERC20-transferFrom}.
   *
   * Emits an {Approval} event indicating the updated allowance. This is not
   * required by the EIP. See the note at the beginning of {ERC20}.
   *
   * NOTE: Does not update the allowance if the current allowance
   * is the maximum `uint256`.
   *
   * Requirements:
   *
   * - `from` and `to` cannot be the zero address.
   * - `from` must have a balance of at least `amount`.
   * - the caller must have allowance for ``from``'s tokens of at least
   * `amount`.
   */
  function transferFrom(
    address from,
    address to,
    uint256 amount
  ) public virtual override returns (bool) {
    address spender = _msgSender();
    _spendAllowance(from, spender, amount);
    _transfer(from, to, amount);
    return true;
  }

  /**
   * @dev Atomically increases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function increaseAllowance(
    address spender,
    uint256 addedValue
  ) public virtual returns (bool) {
    address owner = _msgSender();
    _approve(owner, spender, allowance(owner, spender) + addedValue);
    return true;
  }

  /**
   * @dev Atomically decreases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `spender` must have allowance for the caller of at least
   * `subtractedValue`.
   */
  function decreaseAllowance(
    address spender,
    uint256 subtractedValue
  ) public virtual returns (bool) {
    address owner = _msgSender();
    uint256 currentAllowance = allowance(owner, spender);
    require(
      currentAllowance >= subtractedValue,
      "ERC20: decreased allowance below zero"
    );
    unchecked {
      _approve(owner, spender, currentAllowance - subtractedValue);
    }

    return true;
  }

  /**
   * @dev Moves `amount` of tokens from `from` to `to`.
   *
   * This internal function is equivalent to {transfer}, and can be used to
   * e.g. implement automatic token fees, slashing mechanisms, etc.
   *
   * Emits a {Transfer} event.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `from` must have a balance of at least `amount`.
   */
  function _transfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual {
    require(from != address(0), "ERC20: transfer from the zero address");
    require(to != address(0), "ERC20: transfer to the zero address");

    _beforeTokenTransfer(from, to, amount);

    uint256 fromBalance = _balances[from];
    require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
    unchecked {
      _balances[from] = fromBalance - amount;
      // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
      // decrementing then incrementing.
      _balances[to] += amount;
    }

    emit Transfer(from, to, amount);

    _afterTokenTransfer(from, to, amount);
  }

  /** @dev Creates `amount` tokens and assigns them to `account`, increasing
   * the total supply.
   *
   * Emits a {Transfer} event with `from` set to the zero address.
   *
   * Requirements:
   *
   * - `account` cannot be the zero address.
   */
  function _mint(address account, uint256 amount) internal virtual {
    require(account != address(0), "ERC20: mint to the zero address");

    _beforeTokenTransfer(address(0), account, amount);

    _totalSupply += amount;
    unchecked {
      // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
      _balances[account] += amount;
    }
    emit Transfer(address(0), account, amount);

    _afterTokenTransfer(address(0), account, amount);
  }

  /**
   * @dev Destroys `amount` tokens from `account`, reducing the
   * total supply.
   *
   * Emits a {Transfer} event with `to` set to the zero address.
   *
   * Requirements:
   *
   * - `account` cannot be the zero address.
   * - `account` must have at least `amount` tokens.
   */
  function _burn(address account, uint256 amount) internal virtual {
    require(account != address(0), "ERC20: burn from the zero address");

    _beforeTokenTransfer(account, address(0), amount);

    uint256 accountBalance = _balances[account];
    require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
    unchecked {
      _balances[account] = accountBalance - amount;
      // Overflow not possible: amount <= accountBalance <= totalSupply.
      _totalSupply -= amount;
    }

    emit Transfer(account, address(0), amount);

    _afterTokenTransfer(account, address(0), amount);
  }

  /**
   * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
   *
   * This internal function is equivalent to `approve`, and can be used to
   * e.g. set automatic allowances for certain subsystems, etc.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `owner` cannot be the zero address.
   * - `spender` cannot be the zero address.
   */
  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    require(owner != address(0), "ERC20: approve from the zero address");
    require(spender != address(0), "ERC20: approve to the zero address");

    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  /**
   * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
   *
   * Does not update the allowance amount in case of infinite allowance.
   * Revert if not enough allowance is available.
   *
   * Might emit an {Approval} event.
   */
  function _spendAllowance(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    uint256 currentAllowance = allowance(owner, spender);
    if (currentAllowance != type(uint256).max) {
      require(currentAllowance >= amount, "ERC20: insufficient allowance");
      unchecked {
        _approve(owner, spender, currentAllowance - amount);
      }
    }
  }

  /**
   * @dev Hook that is called before any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * will be transferred to `to`.
   * - when `from` is zero, `amount` tokens will be minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual {}

  /**
   * @dev Hook that is called after any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * has been transferred to `to`.
   * - when `from` is zero, `amount` tokens have been minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _afterTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual {}
}

pragma solidity ^0.8.9;

contract MinerToken is ERC20, Ownable {

  constructor() ERC20("Miner Token", "MINE") {
    _mint(owner(), 300_000_000 * (10 ** 18));
  }

  function claimStuckTokens(address token) external onlyOwner {
    IERC20 ERC20token = IERC20(token);
    uint256 balance = ERC20token.balanceOf(address(this));
    ERC20token.transfer(msg.sender, balance);
  }

  function recoverStuckEther() external onlyOwner {
    uint256 balance = address(this).balance;
    require(balance > 0, "MINE: No ETH available for recovery");
    payable(msg.sender).transfer(balance);
  }

  receive() external payable{}
}

{
  "compilationTarget": {
    "MinerToken.sol": "MinerToken"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": false,
    "runs": 200
  },
  "remappings": []
}