// File: contracts/tokens/interfaces/IMintable.sol



pragma solidity 0.6.12;

interface IMintable {
    function isMinter(address _account) external returns (bool);
    function setMinter(address _minter, bool _isActive) external;
    function mint(address _account, uint256 _amount) external;
    function burn(address _account, uint256 _amount) external;
}

// File: contracts/tokens/interfaces/IBaseToken.sol



pragma solidity 0.6.12;

interface IBaseToken {
    function totalStaked() external view returns (uint256);
    function stakedBalance(address _account) external view returns (uint256);
    function removeAdmin(address _account) external;
    function setInPrivateTransferMode(bool _inPrivateTransferMode) external;
    function withdrawToken(address _token, address _account, uint256 _amount) external;
}

// File: contracts/tokens/interfaces/IYieldTracker.sol



pragma solidity 0.6.12;

interface IYieldTracker {
    function claim(address _account, address _receiver) external returns (uint256);
    function updateRewards(address _account) external;
    function getTokensPerInterval() external view returns (uint256);
    function claimable(address _account) external view returns (uint256);
}

// File: @openzeppelin/contracts/utils/Address.sol



pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: @openzeppelin/contracts/math/SafeMath.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol



pragma solidity >=0.6.0 <0.8.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: contracts/tokens/BaseToken.sol



pragma solidity 0.6.12;






contract BaseToken is IERC20, IBaseToken {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    string public name;
    string public symbol;
    uint8 public constant decimals = 18;

    uint256 public override totalSupply;
    uint256 public nonStakingSupply;

    address public gov;

    mapping (address => uint256) public balances;
    mapping (address => mapping (address => uint256)) public allowances;

    address[] public yieldTrackers;
    mapping (address => bool) public nonStakingAccounts;
    mapping (address => bool) public admins;

    bool public inPrivateTransferMode;
    mapping (address => bool) public isHandler;

    modifier onlyGov() {
        require(msg.sender == gov, "BaseToken: forbidden");
        _;
    }

    modifier onlyAdmin() {
        require(admins[msg.sender], "BaseToken: forbidden");
        _;
    }

    constructor(string memory _name, string memory _symbol, uint256 _initialSupply) public {
        name = _name;
        symbol = _symbol;
        gov = msg.sender;
        _mint(msg.sender, _initialSupply);
    }

    function setGov(address _gov) external onlyGov {
        gov = _gov;
    }

    function setInfo(string memory _name, string memory _symbol) external onlyGov {
        name = _name;
        symbol = _symbol;
    }

    function setYieldTrackers(address[] memory _yieldTrackers) external onlyGov {
        yieldTrackers = _yieldTrackers;
    }

    function addAdmin(address _account) external onlyGov {
        admins[_account] = true;
    }

    function removeAdmin(address _account) external override onlyGov {
        admins[_account] = false;
    }

    // to help users who accidentally send their tokens to this contract
    function withdrawToken(address _token, address _account, uint256 _amount) external override onlyGov {
        IERC20(_token).safeTransfer(_account, _amount);
    }

    function setInPrivateTransferMode(bool _inPrivateTransferMode) external override onlyGov {
        inPrivateTransferMode = _inPrivateTransferMode;
    }

    function setHandler(address _handler, bool _isActive) external onlyGov {
        isHandler[_handler] = _isActive;
    }

    function addNonStakingAccount(address _account) external onlyAdmin {
        require(!nonStakingAccounts[_account], "BaseToken: _account already marked");
        _updateRewards(_account);
        nonStakingAccounts[_account] = true;
        nonStakingSupply = nonStakingSupply.add(balances[_account]);
    }

    function removeNonStakingAccount(address _account) external onlyAdmin {
        require(nonStakingAccounts[_account], "BaseToken: _account not marked");
        _updateRewards(_account);
        nonStakingAccounts[_account] = false;
        nonStakingSupply = nonStakingSupply.sub(balances[_account]);
    }

    function recoverClaim(address _account, address _receiver) external onlyAdmin {
        for (uint256 i = 0; i < yieldTrackers.length; i++) {
            address yieldTracker = yieldTrackers[i];
            IYieldTracker(yieldTracker).claim(_account, _receiver);
        }
    }

    function claim(address _receiver) external {
        for (uint256 i = 0; i < yieldTrackers.length; i++) {
            address yieldTracker = yieldTrackers[i];
            IYieldTracker(yieldTracker).claim(msg.sender, _receiver);
        }
    }

    function totalStaked() external view override returns (uint256) {
        return totalSupply.sub(nonStakingSupply);
    }

    function balanceOf(address _account) external view override returns (uint256) {
        return balances[_account];
    }

    function stakedBalance(address _account) external view override returns (uint256) {
        if (nonStakingAccounts[_account]) {
            return 0;
        }
        return balances[_account];
    }

    function transfer(address _recipient, uint256 _amount) external override returns (bool) {
        _transfer(msg.sender, _recipient, _amount);
        return true;
    }

    function allowance(address _owner, address _spender) external view override returns (uint256) {
        return allowances[_owner][_spender];
    }

    function approve(address _spender, uint256 _amount) external override returns (bool) {
        _approve(msg.sender, _spender, _amount);
        return true;
    }

    function transferFrom(address _sender, address _recipient, uint256 _amount) external override returns (bool) {
        if (isHandler[msg.sender]) {
            _transfer(_sender, _recipient, _amount);
            return true;
        }
        uint256 nextAllowance = allowances[_sender][msg.sender].sub(_amount, "BaseToken: transfer amount exceeds allowance");
        _approve(_sender, msg.sender, nextAllowance);
        _transfer(_sender, _recipient, _amount);
        return true;
    }

    function _mint(address _account, uint256 _amount) internal {
        require(_account != address(0), "BaseToken: mint to the zero address");

        _updateRewards(_account);

        totalSupply = totalSupply.add(_amount);
        balances[_account] = balances[_account].add(_amount);

        if (nonStakingAccounts[_account]) {
            nonStakingSupply = nonStakingSupply.add(_amount);
        }

        emit Transfer(address(0), _account, _amount);
    }

    function _burn(address _account, uint256 _amount) internal {
        require(_account != address(0), "BaseToken: burn from the zero address");

        _updateRewards(_account);

        balances[_account] = balances[_account].sub(_amount, "BaseToken: burn amount exceeds balance");
        totalSupply = totalSupply.sub(_amount);

        if (nonStakingAccounts[_account]) {
            nonStakingSupply = nonStakingSupply.sub(_amount);
        }

        emit Transfer(_account, address(0), _amount);
    }

    function _transfer(address _sender, address _recipient, uint256 _amount) private {
        require(_sender != address(0), "BaseToken: transfer from the zero address");
        require(_recipient != address(0), "BaseToken: transfer to the zero address");

        if (inPrivateTransferMode) {
            require(isHandler[msg.sender], "BaseToken: msg.sender not whitelisted");
        }

        _updateRewards(_sender);
        _updateRewards(_recipient);

        balances[_sender] = balances[_sender].sub(_amount, "BaseToken: transfer amount exceeds balance");
        balances[_recipient] = balances[_recipient].add(_amount);

        if (nonStakingAccounts[_sender]) {
            nonStakingSupply = nonStakingSupply.sub(_amount);
        }
        if (nonStakingAccounts[_recipient]) {
            nonStakingSupply = nonStakingSupply.add(_amount);
        }

        emit Transfer(_sender, _recipient,_amount);
    }

    function _approve(address _owner, address _spender, uint256 _amount) private {
        require(_owner != address(0), "BaseToken: approve from the zero address");
        require(_spender != address(0), "BaseToken: approve to the zero address");

        allowances[_owner][_spender] = _amount;

        emit Approval(_owner, _spender, _amount);
    }

    function _updateRewards(address _account) private {
        for (uint256 i = 0; i < yieldTrackers.length; i++) {
            address yieldTracker = yieldTrackers[i];
            IYieldTracker(yieldTracker).updateRewards(_account);
        }
    }
}

// File: contracts/tokens/MintableBaseToken.sol

pragma solidity 0.6.12;



contract MintableBaseToken is BaseToken, IMintable {

    mapping (address => bool) public override isMinter;

    constructor(string memory _name, string memory _symbol, uint256 _initialSupply) public BaseToken(_name, _symbol, _initialSupply) {
    }

    modifier onlyMinter() {
        require(isMinter[msg.sender], "MintableBaseToken: forbidden");
        _;
    }

    function setMinter(address _minter, bool _isActive) external override onlyGov {
        isMinter[_minter] = _isActive;
    }

    function mint(address _account, uint256 _amount) external override onlyMinter {
        _mint(_account, _amount);
    }

    function burn(address _account, uint256 _amount) external override onlyMinter {
        _burn(_account, _amount);
    }
}

pragma solidity 0.6.12;


contract BTD is MintableBaseToken {
    constructor() public MintableBaseToken("Base Trade", "BTD", 0) {
    }

    function id() external pure returns (string memory _name) {
        return "BTD";
    }
}

{
  "compilationTarget": {
    "BTD.sol": "BTD"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 1
  },
  "remappings": []
}