// File: @openzeppelin\contracts\utils\Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin\contracts\access\Ownable.sol


// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin\contracts\utils\math\SafeMath.sol


// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// File: @openzeppelin\contracts\token\ERC20\IERC20.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// File: @openzeppelin\contracts\token\ERC20\extensions\IERC20Metadata.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: contracts\DooraInu.sol

// SPDX-License-Identifier: MIT LICENSE

//website:https://doorainu.world/
//telegram:https://t.me/doorainuworld
pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) internal _balances;

    mapping(address => mapping(address => uint256)) internal _allowances;

    uint256 internal _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
        }
        _balances[to] += amount;

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        _spendAllowance(account, _msgSender(), amount);
        _burn(account, amount);
    }
}

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);
    function migrator() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
    function setMigrator(address) external;
}

interface IUniswapRouter01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

interface IUniswapRouter02 is IUniswapRouter01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}


contract DooraInu is ERC20, ERC20Burnable, Ownable{
    using SafeMath for uint256;

    mapping(address => bool) public controllers;

    uint256 constant MAXIMUMSUPPLY = (10**8)*1e18;

    address payable public marketingWalletAddress = payable(0xAfa16265Bf434ad83c04bC9Ae26Ce2113c66c9fd) ;
    address payable public developmentWalletAddress = payable(0x1D8Cf1c5735b92C52cAD6f9CE61Fd3a7eCcf5F79) ; 
    address payable public priceProtectionAddress = payable(0x0000000000000000000000000000000000000000) ; 
    address public immutable deadAddress = 0x000000000000000000000000000000000000dEaD;
 
    mapping (address => bool) public isExcludedFromFee;
    mapping (address => bool) public isEarlyBuyer;
    mapping (address => bool) public isTxLimitExempt;
    mapping (address => bool) public isWalletLimitExempt;
 
    uint256 public _protectionFee = 3;
    uint256 public _marketingFee = 1;
    uint256 public _developmentFee = 1;
    uint256 public _totalTax = 5;
    uint256 public _extraFeeOnSell = 0; 
    uint256 public _totalTaxIfSelling = 5;
    

    uint256 private minimumTokensBeforeSwap = 5000 * 1e18;
    uint256 public maxTxAmount = 1 * 10**6 *1e18;
    uint256 public walletMax = 2 * 10**6 *1e18; 

    mapping(address => uint256) private _lastSell;
    bool public coolDownEnabled = false;
    uint256 public coolDownTime = 30 seconds;

    IUniswapRouter02 public uniswapRouter;
    address public uniswapPair;
    address public contSetter;
    
    bool inSwapAndLiquify;
    bool public swapAndLiquifyEnabled = true;
    bool public swapAndLiquifyByLimitOnly = false;
    bool public launched = false;
    bool public checkWalletLimit = true;
    bool public snipeBlockExpired = false;

    uint256 public launchBlock = 0;
    uint256 public snipeBlockAmount = 0;

    event SwapAndLiquifyEnabledUpdated(bool enabled);
    event SwapAndLiquify(
        uint256 tokensSwapped,
        uint256 ethReceived,
        uint256 tokensIntoLiqudity
    );
    
    event SwapETHForTokens(
        uint256 amountIn,
        address[] path
    );
    
    event SwapTokensForETH(
        uint256 amountIn,
        address[] path
    );

    event RenounceContSetter();
    event AccountWhitelisted(address account, bool feeExempt, bool walletLimitExempt, bool txLimitExempt);
    event RouterVersionChanged(address newRouterAddress);
    event AutoLiquidityReceiverChanged(address autoLiquidityReceiver_);
    event EarlyBuyerUpdated(address account, bool isEarlyBuyer_);
    event MarketPairUpdated(address account, bool isMarketPair_);
    event WalletLimitChanged(uint256 walletMax_);
    event MaxTxAmountChanged(uint256 maxTxAmount_);
    event MaxWalletCheckChanged(bool checkWalletLimit_);

    modifier onlyController() {
        require(controllers[msg.sender] , "Ownable: caller is not a controller");
        _;
    }
    
    modifier lockTheSwap {
        inSwapAndLiquify = true;
        _;
        inSwapAndLiquify = false;
    }

  constructor() 
    ERC20("Doora Inu", "DINU") 
    {   _mint(msg.sender, MAXIMUMSUPPLY );
        contSetter = msg.sender ;
        controllers[msg.sender] = true;
        IUniswapRouter02 _uniswapRouter = IUniswapRouter02(0x1b02dA8Cb0d097eB8D57A175b88c7D8b47997506); 

        uniswapPair = IUniswapV2Factory(_uniswapRouter.factory())
            .createPair(address(this), _uniswapRouter.WETH());

        uniswapRouter = _uniswapRouter;
        _allowances[address(this)][address(uniswapRouter)] = MAXIMUMSUPPLY;

        isExcludedFromFee[owner()] = true;
        isExcludedFromFee[address(this)] = true;
        isExcludedFromFee[marketingWalletAddress] = true;
        isExcludedFromFee[developmentWalletAddress] = true;


        isTxLimitExempt[owner()] = true;
        isTxLimitExempt[address(this)] = true;
        isTxLimitExempt[marketingWalletAddress] = true;
        isTxLimitExempt[developmentWalletAddress] = true;

        isWalletLimitExempt[owner()] = true;
        isWalletLimitExempt[uniswapPair] = true;
        isWalletLimitExempt[address(this)] = true;
        isWalletLimitExempt[marketingWalletAddress] = true;
        isWalletLimitExempt[developmentWalletAddress] = true;
        
        _totalTax = _protectionFee.add(_marketingFee).add(_developmentFee);
        _totalTaxIfSelling = _totalTax.add(_extraFeeOnSell);

  }

  function addController(address controller) external  {
    require(msg.sender == contSetter, "Only contSetter can set controllers");
    controllers[controller] = true;
  }

  function removeController(address controller) external {
    require(msg.sender == contSetter, "Only contSetter can set controllers");
    controllers[controller] = false;
  }

  function renounceContSetter() external {
    require(msg.sender == contSetter, "Only contSetter");
    contSetter = address(0);
    emit RenounceContSetter();
  }

  function maxSupply() public  pure returns (uint256) {
    return MAXIMUMSUPPLY;
  }


    function launch(uint256 snipeBlockAmount_) public onlyOwner {
        require(!launched , "already launched");
        launched = true;
        launchBlock = block.number;
        snipeBlockAmount = snipeBlockAmount_;
    }

    function setIsEarlyBuyer(address account, bool isEarlyBuyer_) public onlyController {
        isEarlyBuyer[account] = isEarlyBuyer_;
        emit EarlyBuyerUpdated(account, isEarlyBuyer_);
    }

    function minimumTokensBeforeSwapAmount() public view returns (uint256) {
        return minimumTokensBeforeSwap;
    }

    function setMaxTxAmount(uint256 maxTxAmount_) external onlyController {
        require(maxTxAmount_ > 100000 * 1e18 , "min value is 100000");
        maxTxAmount = maxTxAmount_;
        emit MaxTxAmountChanged(maxTxAmount_);
    }

    function setWalletLimit(uint256 walletMax_) external onlyController {
        require(walletMax_ > 200000 * 1e18 , "min value is 200000");
        walletMax  = walletMax_;
        emit WalletLimitChanged(walletMax_);
    }

    function enableDisableWalletLimit(bool checkWalletLimit_) external onlyController {
        checkWalletLimit = checkWalletLimit_;
        emit MaxWalletCheckChanged(checkWalletLimit_);
    }
    
    function whitelistAccount(address account, bool feeExempt, bool walletLimitExempt, bool txLimitExempt) public onlyController {
        isExcludedFromFee[account] = feeExempt;
        isWalletLimitExempt[account] = walletLimitExempt;
        isTxLimitExempt[account] = txLimitExempt;
        emit AccountWhitelisted(account, feeExempt, walletLimitExempt, txLimitExempt);
    }

    function setIsExcludedFromFee(address account, bool newValue) public onlyController {
        isExcludedFromFee[account] = newValue;
    }

    function setTaxes(uint256 newProtectionTax, uint256 newMarketingTax, uint256 newdevelopmentTax, uint256 newExtraFeeOnSell)
        external onlyController {
        _protectionFee = newProtectionTax;
        _marketingFee = newMarketingTax;
        _developmentFee = newdevelopmentTax;
        _extraFeeOnSell = newExtraFeeOnSell;

        _totalTax = _protectionFee.add(_marketingFee).add(_developmentFee);
        _totalTaxIfSelling = _totalTax.add(_extraFeeOnSell);
        require(_totalTax <= 10, "Must keep fees at 10% or less");
        require(_totalTaxIfSelling <= 10, "Must keep fees at 10% or less");

    }
 
    function updateCooldown(bool state, uint256 time) external onlyController{
        coolDownTime = time;
        coolDownEnabled = state;
    }

    function setNumTokensBeforeSwap(uint256 newLimit) external onlyController() {
        minimumTokensBeforeSwap = newLimit;
    }

    function setMarketingWalletAddress(address newAddress) external onlyController() {
        marketingWalletAddress = payable(newAddress);
        isExcludedFromFee[newAddress] = true;
        isWalletLimitExempt[newAddress] = true;
        isTxLimitExempt[newAddress] = true;
    }

    function setdevelopmentWalletAddress(address newAddress) external onlyController() {
        developmentWalletAddress = payable(newAddress);
        isExcludedFromFee[newAddress] = true;
        isWalletLimitExempt[newAddress] = true;
        isTxLimitExempt[newAddress] = true;
    }

    function setProtectionAddress(address newAddress) external onlyController() {
        priceProtectionAddress = payable(newAddress);
        isExcludedFromFee[newAddress] = true;
        isWalletLimitExempt[newAddress] = true;
        isTxLimitExempt[newAddress] = true;
    }

    function setSwapAndLiquifyEnabled(bool _enabled) public onlyController {
        swapAndLiquifyEnabled = _enabled;
        emit SwapAndLiquifyEnabledUpdated(_enabled);
    }

    function setSwapAndLiquifyByLimitOnly(bool newValue) public onlyController {
        swapAndLiquifyByLimitOnly = newValue;
    }
    
    function getCirculatingSupply() public view returns (uint256) {
        return _totalSupply.sub(balanceOf(deadAddress));
    }

    function transferToAddressETH(address payable recipient, uint256 amount) private {
        recipient.transfer(amount);
    }
    
    function changePair(address newPairAddress) public onlyController  {

        require (newPairAddress != address(0) , "pair cannot be the zero address");

        uniswapPair = newPairAddress; //Set new pair address
        isWalletLimitExempt[uniswapPair] = true;
    }

    function updateRouter(address newRouterAddress) public onlyController returns(address newPairAddress) {
        IUniswapRouter02 dexRouter_ = IUniswapRouter02(newRouterAddress); 
        newPairAddress = IUniswapV2Factory(dexRouter_.factory()).getPair(address(this), dexRouter_.WETH());

        if(newPairAddress == address(0)) { //Create If Doesnt exist
            newPairAddress = IUniswapV2Factory(dexRouter_.factory()).
                                createPair(address(this), dexRouter_.WETH());
        }

        uniswapPair = newPairAddress; //Set new pair address
        uniswapRouter = dexRouter_; //Set new router address

        isWalletLimitExempt[address(uniswapPair)] = true;
        emit RouterVersionChanged(newRouterAddress);
    }

     //to recieve ETH from uniswapRouter when swaping
    receive() external payable {}

    function _transfer(address sender, address recipient, uint256 amount) internal override  {

        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");
        require(!isEarlyBuyer[sender] && !isEarlyBuyer[recipient], "To/from address is blacklisted!");
        
        if(inSwapAndLiquify)
        { 
             _basicTransfer(sender, recipient, amount); 
        }
        else
        {
            if(!isTxLimitExempt[sender] && !isTxLimitExempt[recipient]) {
                require(launched, "Not Launched.");
                require(amount <= maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
                
                if(!snipeBlockExpired) {
                    checkIfBot(sender, recipient);
                }
            }
            
            uint256 contractTokenBalance = balanceOf(address(this));
            bool overMinimumTokenBalance = contractTokenBalance >= minimumTokensBeforeSwap;
            
            
            if (overMinimumTokenBalance && !inSwapAndLiquify && sender != uniswapPair && swapAndLiquifyEnabled) 
            {
                if(swapAndLiquifyByLimitOnly)
                    contractTokenBalance = minimumTokensBeforeSwap;
                swapAndLiquify(contractTokenBalance); 
                if(coolDownEnabled && !isExcludedFromFee[sender] ){
                uint256 timePassed = block.timestamp - _lastSell[sender];
                require(timePassed >= coolDownTime, "Cooldown enabled");
                _lastSell[sender] = block.timestamp;
            }   
            }

            _balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");

            uint256 finalAmount = (isExcludedFromFee[sender] || isExcludedFromFee[recipient]) ? 
                                         amount : takeFee(sender, recipient, amount);

            
            if(checkWalletLimit && !isWalletLimitExempt[recipient])
                require((balanceOf(recipient) + finalAmount) <= walletMax , "max wallet limit exceed!");

            _balances[recipient] = _balances[recipient].add(finalAmount);

            emit Transfer(sender, recipient, finalAmount);
           
        }
    }

    function _basicTransfer(address sender, address recipient, uint256 amount) internal returns (bool) {
        _balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
        return true;
    }

    function swapAndLiquify(uint256 tAmount) private lockTheSwap {

        swapTokensForEth(tAmount);
        uint256 amountReceived = address(this).balance;
        
        uint256 amountETHProtection = amountReceived.mul(_protectionFee).div(_totalTax);
        uint256 amountETHdevelopment = amountReceived.mul(_developmentFee).div(_totalTax);
        uint256 amountETHMarketing = amountReceived.sub(amountETHProtection).sub(amountETHdevelopment);

        transferToAddressETH(marketingWalletAddress, amountETHMarketing);
        transferToAddressETH(developmentWalletAddress, amountETHdevelopment);
        transferToAddressETH(priceProtectionAddress, amountETHProtection);
    }
    
    function swapTokensForEth(uint256 tokenAmount) private {
        // generate the uniswap pair path of token -> weth
        address[] memory path = new address[](2);
        path[0] = address(this);
        path[1] = uniswapRouter.WETH();

        _approve(address(this), address(uniswapRouter), tokenAmount);

        // make the swap
        uniswapRouter.swapExactTokensForETHSupportingFeeOnTransferTokens(
            tokenAmount,
            0, // accept any amount of ETH
            path,
            address(this), // The contract
            block.timestamp
        );
        
        emit SwapTokensForETH(tokenAmount, path);
    }
    
    function checkIfBot(address sender, address recipient) private {
        if((block.number - launchBlock) > snipeBlockAmount) {
            snipeBlockExpired = true;
        } else if(sender != owner() && recipient != owner()) {
            if(sender != uniswapPair && sender != address(this)) {
                isEarlyBuyer[sender] = true;
            }
            if(recipient != uniswapPair && recipient != address(this)) {
                isEarlyBuyer[recipient] = true;
            }
        }
    }

    function takeFee(address sender, address recipient, uint256 amount) internal returns (uint256) {
        
        uint256 feeAmount = recipient == uniswapPair ? amount.mul(_totalTaxIfSelling).div(100) 
                                : amount.mul(_totalTax).div(100);

        _balances[address(this)] = _balances[address(this)].add(feeAmount);
        emit Transfer(sender, address(this), feeAmount);

        return amount.sub(feeAmount);
    }

    //Use this in case ETH are sent to the contract by mistake
    function rescueETH() external onlyController{
        require(address(this).balance > 0, "insufficient BNB balance");
        payable(msg.sender).transfer(address(this).balance);
    }
    
    function rescueAnyERC20Tokens(address _tokenAddr, address _to, uint _amount) external onlyController {
        IERC20(_tokenAddr).transfer(_to, _amount);
    }
}

{
  "compilationTarget": {
    "DooraInu.sol": "DooraInu"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}