/**
 *Submitted for verification at Etherscan.io on 2024-02-11
*/

//Inspired by all the great work out there from ERC20, 404, 721, 721a, 721Psi, 1155, 1155Delta

// SPDX-License-Identifier: MIT

pragma solidity 0.8.24;

abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

interface IERC20 {
    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);
    function totalSupply() external view returns (uint256);
    function balanceOf(address account) external view returns (uint256);
    function transfer(address to, uint256 value) external returns (bool);
    function allowance(address owner, address spender) external view returns (uint256);
    function approve(address spender, uint256 value) external returns (bool);
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

interface IERC20Metadata is IERC20 {
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
}

interface IERC20Errors {
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);
    error ERC20InvalidSender(address sender);
    error ERC20InvalidReceiver(address receiver);
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);
    error ERC20InvalidApprover(address approver);
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }
}

interface IERCX {
    /**
     * The caller must own the token or be an approved operator.
     */
    error ApprovalCallerNotOwnerNorApproved();

    /**
     * Cannot query the balance for the zero address.
     */
    error BalanceQueryForZeroAddress();

    /**
     * Cannot mint to the zero address.
     */
    error MintToZeroAddress();

    /**
     * The quantity of tokens minted must be more than zero.
     */
    error MintZeroQuantity();

    /**
     * Cannot burn from the zero address.
     */
    error BurnFromZeroAddress();

    /**
     * Cannot burn from the address that doesn't owne the token.
     */
    error BurnFromNonOnwerAddress();

    /**
     * The caller must own the token or be an approved operator.
     */
    error TransferCallerNotOwnerNorApproved();

    /**
     * The token must be owned by `from` or the `amount` is not 1.
     */
    error TransferFromIncorrectOwnerOrInvalidAmount();

    /**
     * Cannot safely transfer to a contract that does not implement the
     * ERC1155Receiver interface.
     */
    error TransferToNonERC1155ReceiverImplementer();
    error TransferToNonERC721ReceiverImplementer();

    /**
     * Cannot transfer to the zero address.
     */
    error TransferToZeroAddress();

    /**
     * The length of input arraies is not matching.
     */
    error InputLengthMistmatch();

    function isOwnerOf(address account, uint256 id) external view returns(bool);
}

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

/**
 * @dev Interface that must be implemented by smart contracts in order to receive
 * ERC-1155 token transfers.
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}


abstract contract ERC721Receiver {
    function onERC721Received(
        address,
        address,
        uint256,
        bytes calldata
    ) external virtual returns (bytes4) {
        return ERC721Receiver.onERC721Received.selector;
    }
}

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}


/// @notice Library for bit twiddling and boolean operations.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/utils/LibBit.sol)
/// @author Inspired by (https://graphics.stanford.edu/~seander/bithacks.html)
library LibBit {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                  BIT TWIDDLING OPERATIONS                  */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Find last set.
    /// Returns the index of the most significant bit of `x`,
    /// counting from the least significant bit position.
    /// If `x` is zero, returns 256.
    function fls(uint256 x) internal pure returns (uint256 r) {
        /// @solidity memory-safe-assembly
        assembly {
            r := or(shl(8, iszero(x)), shl(7, lt(0xffffffffffffffffffffffffffffffff, x)))
            r := or(r, shl(6, lt(0xffffffffffffffff, shr(r, x))))
            r := or(r, shl(5, lt(0xffffffff, shr(r, x))))
            r := or(r, shl(4, lt(0xffff, shr(r, x))))
            r := or(r, shl(3, lt(0xff, shr(r, x))))
            // forgefmt: disable-next-item
            r := or(r, byte(and(0x1f, shr(shr(r, x), 0x8421084210842108cc6318c6db6d54be)),
                0x0706060506020504060203020504030106050205030304010505030400000000))
        }
    }

    /// @dev Count leading zeros.
    /// Returns the number of zeros preceding the most significant one bit.
    /// If `x` is zero, returns 256.
    function clz(uint256 x) internal pure returns (uint256 r) {
        /// @solidity memory-safe-assembly
        assembly {
            r := shl(7, lt(0xffffffffffffffffffffffffffffffff, x))
            r := or(r, shl(6, lt(0xffffffffffffffff, shr(r, x))))
            r := or(r, shl(5, lt(0xffffffff, shr(r, x))))
            r := or(r, shl(4, lt(0xffff, shr(r, x))))
            r := or(r, shl(3, lt(0xff, shr(r, x))))
            // forgefmt: disable-next-item
            r := add(xor(r, byte(and(0x1f, shr(shr(r, x), 0x8421084210842108cc6318c6db6d54be)),
                0xf8f9f9faf9fdfafbf9fdfcfdfafbfcfef9fafdfafcfcfbfefafafcfbffffffff)), iszero(x))
        }
    }

    /// @dev Find first set.
    /// Returns the index of the least significant bit of `x`,
    /// counting from the least significant bit position.
    /// If `x` is zero, returns 256.
    /// Equivalent to `ctz` (count trailing zeros), which gives
    /// the number of zeros following the least significant one bit.
    function ffs(uint256 x) internal pure returns (uint256 r) {
        /// @solidity memory-safe-assembly
        assembly {
            // Isolate the least significant bit.
            let b := and(x, add(not(x), 1))

            r := or(shl(8, iszero(x)), shl(7, lt(0xffffffffffffffffffffffffffffffff, b)))
            r := or(r, shl(6, lt(0xffffffffffffffff, shr(r, b))))
            r := or(r, shl(5, lt(0xffffffff, shr(r, b))))

            // For the remaining 32 bits, use a De Bruijn lookup.
            // forgefmt: disable-next-item
            r := or(r, byte(and(div(0xd76453e0, shr(r, b)), 0x1f),
                0x001f0d1e100c1d070f090b19131c1706010e11080a1a141802121b1503160405))
        }
    }

    /// @dev Returns the number of set bits in `x`.
    function popCount(uint256 x) internal pure returns (uint256 c) {
        /// @solidity memory-safe-assembly
        assembly {
            let max := not(0)
            let isMax := eq(x, max)
            x := sub(x, and(shr(1, x), div(max, 3)))
            x := add(and(x, div(max, 5)), and(shr(2, x), div(max, 5)))
            x := and(add(x, shr(4, x)), div(max, 17))
            c := or(shl(8, isMax), shr(248, mul(x, div(max, 255))))
        }
    }

    /// @dev Returns whether `x` is a power of 2.
    function isPo2(uint256 x) internal pure returns (bool result) {
        /// @solidity memory-safe-assembly
        assembly {
            // Equivalent to `x && !(x & (x - 1))`.
            result := iszero(add(and(x, sub(x, 1)), iszero(x)))
        }
    }

    /// @dev Returns `x` reversed at the bit level.
    function reverseBits(uint256 x) internal pure returns (uint256 r) {
        uint256 m0 = 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f;
        uint256 m1 = m0 ^ (m0 << 2);
        uint256 m2 = m1 ^ (m1 << 1);
        r = reverseBytes(x);
        r = (m2 & (r >> 1)) | ((m2 & r) << 1);
        r = (m1 & (r >> 2)) | ((m1 & r) << 2);
        r = (m0 & (r >> 4)) | ((m0 & r) << 4);
    }

    /// @dev Returns `x` reversed at the byte level.
    function reverseBytes(uint256 x) internal pure returns (uint256 r) {
        unchecked {
            // Computing masks on-the-fly reduces bytecode size by about 200 bytes.
            uint256 m0 = 0x100000000000000000000000000000001 * (~toUint(x == 0) >> 192);
            uint256 m1 = m0 ^ (m0 << 32);
            uint256 m2 = m1 ^ (m1 << 16);
            uint256 m3 = m2 ^ (m2 << 8);
            r = (m3 & (x >> 8)) | ((m3 & x) << 8);
            r = (m2 & (r >> 16)) | ((m2 & r) << 16);
            r = (m1 & (r >> 32)) | ((m1 & r) << 32);
            r = (m0 & (r >> 64)) | ((m0 & r) << 64);
            r = (r >> 128) | (r << 128);
        }
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                     BOOLEAN OPERATIONS                     */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    // A Solidity bool on the stack or memory is represented as a 256-bit word.
    // Non-zero values are true, zero is false.
    // A clean bool is either 0 (false) or 1 (true) under the hood.
    // Usually, if not always, the bool result of a regular Solidity expression,
    // or the argument of a public/external function will be a clean bool.
    // You can usually use the raw variants for more performance.
    // If uncertain, test (best with exact compiler settings).
    // Or use the non-raw variants (compiler can sometimes optimize out the double `iszero`s).

    /// @dev Returns `x & y`. Inputs must be clean.
    function rawAnd(bool x, bool y) internal pure returns (bool z) {
        /// @solidity memory-safe-assembly
        assembly {
            z := and(x, y)
        }
    }

    /// @dev Returns `x & y`.
    function and(bool x, bool y) internal pure returns (bool z) {
        /// @solidity memory-safe-assembly
        assembly {
            z := and(iszero(iszero(x)), iszero(iszero(y)))
        }
    }

    /// @dev Returns `x | y`. Inputs must be clean.
    function rawOr(bool x, bool y) internal pure returns (bool z) {
        /// @solidity memory-safe-assembly
        assembly {
            z := or(x, y)
        }
    }

    /// @dev Returns `x | y`.
    function or(bool x, bool y) internal pure returns (bool z) {
        /// @solidity memory-safe-assembly
        assembly {
            z := or(iszero(iszero(x)), iszero(iszero(y)))
        }
    }

    /// @dev Returns 1 if `b` is true, else 0. Input must be clean.
    function rawToUint(bool b) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            z := b
        }
    }

    /// @dev Returns 1 if `b` is true, else 0.
    function toUint(bool b) internal pure returns (uint256 z) {
        /// @solidity memory-safe-assembly
        assembly {
            z := iszero(iszero(b))
        }
    }
}

/// @notice Library for storage of packed unsigned booleans.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/utils/LibBitmap.sol)
/// @author Modified from Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/LibBitmap.sol)
/// @author Modified from Solidity-Bits (https://github.com/estarriolvetch/solidity-bits/blob/main/contracts/BitMaps.sol)
library LibBitmap {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         CONSTANTS                          */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev The constant returned when a bitmap scan does not find a result.
    uint256 internal constant NOT_FOUND = type(uint256).max;

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          STRUCTS                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev A bitmap in storage.
    struct Bitmap {
        mapping(uint256 => uint256) map;
    }

    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         OPERATIONS                         */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/

    /// @dev Returns the boolean value of the bit at `index` in `bitmap`.
    function get(Bitmap storage bitmap, uint256 index) internal view returns (bool isSet) {
        // It is better to set `isSet` to either 0 or 1, than zero vs non-zero.
        // Both cost the same amount of gas, but the former allows the returned value
        // to be reused without cleaning the upper bits.
        uint256 b = (bitmap.map[index >> 8] >> (index & 0xff)) & 1;
        /// @solidity memory-safe-assembly
        assembly {
            isSet := b
        }
    }

    /// @dev Updates the bit at `index` in `bitmap` to true.
    function set(Bitmap storage bitmap, uint256 index) internal {
        bitmap.map[index >> 8] |= (1 << (index & 0xff));
    }

    /// @dev Updates the bit at `index` in `bitmap` to false.
    function unset(Bitmap storage bitmap, uint256 index) internal {
        bitmap.map[index >> 8] &= ~(1 << (index & 0xff));
    }

    /// @dev Flips the bit at `index` in `bitmap`.
    /// Returns the boolean result of the flipped bit.
    function toggle(Bitmap storage bitmap, uint256 index) internal returns (bool newIsSet) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x20, bitmap.slot)
            mstore(0x00, shr(8, index))
            let storageSlot := keccak256(0x00, 0x40)
            let shift := and(index, 0xff)
            let storageValue := xor(sload(storageSlot), shl(shift, 1))
            // It makes sense to return the `newIsSet`,
            // as it allow us to skip an additional warm `sload`,
            // and it costs minimal gas (about 15),
            // which may be optimized away if the returned value is unused.
            newIsSet := and(1, shr(shift, storageValue))
            sstore(storageSlot, storageValue)
        }
    }

    /// @dev Updates the bit at `index` in `bitmap` to `shouldSet`.
    function setTo(Bitmap storage bitmap, uint256 index, bool shouldSet) internal {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x20, bitmap.slot)
            mstore(0x00, shr(8, index))
            let storageSlot := keccak256(0x00, 0x40)
            let storageValue := sload(storageSlot)
            let shift := and(index, 0xff)
            sstore(
                storageSlot,
                // Unsets the bit at `shift` via `and`, then sets its new value via `or`.
                or(and(storageValue, not(shl(shift, 1))), shl(shift, iszero(iszero(shouldSet))))
            )
        }
    }

    /// @dev Consecutively sets `amount` of bits starting from the bit at `start`.
    function setBatch(Bitmap storage bitmap, uint256 start, uint256 amount) internal {
        /// @solidity memory-safe-assembly
        assembly {
            let max := not(0)
            let shift := and(start, 0xff)
            mstore(0x20, bitmap.slot)
            mstore(0x00, shr(8, start))
            if iszero(lt(add(shift, amount), 257)) {
                let storageSlot := keccak256(0x00, 0x40)
                sstore(storageSlot, or(sload(storageSlot), shl(shift, max)))
                let bucket := add(mload(0x00), 1)
                let bucketEnd := add(mload(0x00), shr(8, add(amount, shift)))
                amount := and(add(amount, shift), 0xff)
                shift := 0
                for {} iszero(eq(bucket, bucketEnd)) { bucket := add(bucket, 1) } {
                    mstore(0x00, bucket)
                    sstore(keccak256(0x00, 0x40), max)
                }
                mstore(0x00, bucket)
            }
            let storageSlot := keccak256(0x00, 0x40)
            sstore(storageSlot, or(sload(storageSlot), shl(shift, shr(sub(256, amount), max))))
        }
    }

    /// @dev Consecutively unsets `amount` of bits starting from the bit at `start`.
    function unsetBatch(Bitmap storage bitmap, uint256 start, uint256 amount) internal {
        /// @solidity memory-safe-assembly
        assembly {
            let shift := and(start, 0xff)
            mstore(0x20, bitmap.slot)
            mstore(0x00, shr(8, start))
            if iszero(lt(add(shift, amount), 257)) {
                let storageSlot := keccak256(0x00, 0x40)
                sstore(storageSlot, and(sload(storageSlot), not(shl(shift, not(0)))))
                let bucket := add(mload(0x00), 1)
                let bucketEnd := add(mload(0x00), shr(8, add(amount, shift)))
                amount := and(add(amount, shift), 0xff)
                shift := 0
                for {} iszero(eq(bucket, bucketEnd)) { bucket := add(bucket, 1) } {
                    mstore(0x00, bucket)
                    sstore(keccak256(0x00, 0x40), 0)
                }
                mstore(0x00, bucket)
            }
            let storageSlot := keccak256(0x00, 0x40)
            sstore(
                storageSlot, and(sload(storageSlot), not(shl(shift, shr(sub(256, amount), not(0)))))
            )
        }
    }

    /// @dev Returns number of set bits within a range by
    /// scanning `amount` of bits starting from the bit at `start`.
    function popCount(Bitmap storage bitmap, uint256 start, uint256 amount)
        internal
        view
        returns (uint256 count)
    {
        unchecked {
            uint256 bucket = start >> 8;
            uint256 shift = start & 0xff;
            if (!(amount + shift < 257)) {
                count = LibBit.popCount(bitmap.map[bucket] >> shift);
                uint256 bucketEnd = bucket + ((amount + shift) >> 8);
                amount = (amount + shift) & 0xff;
                shift = 0;
                for (++bucket; bucket != bucketEnd; ++bucket) {
                    count += LibBit.popCount(bitmap.map[bucket]);
                }
            }
            count += LibBit.popCount((bitmap.map[bucket] >> shift) << (256 - amount));
        }
    }

    /// @dev Returns the index of the most significant set bit before the bit at `before`.
    /// If no set bit is found, returns `NOT_FOUND`.
    function findLastSet(Bitmap storage bitmap, uint256 before)
        internal
        view
        returns (uint256 setBitIndex)
    {
        uint256 bucket;
        uint256 bucketBits;
        /// @solidity memory-safe-assembly
        assembly {
            setBitIndex := not(0)
            bucket := shr(8, before)
            mstore(0x00, bucket)
            mstore(0x20, bitmap.slot)
            let offset := and(0xff, not(before)) // `256 - (255 & before) - 1`.
            bucketBits := shr(offset, shl(offset, sload(keccak256(0x00, 0x40))))
            if iszero(or(bucketBits, iszero(bucket))) {
                for {} 1 {} {
                    bucket := add(bucket, setBitIndex) // `sub(bucket, 1)`.
                    mstore(0x00, bucket)
                    bucketBits := sload(keccak256(0x00, 0x40))
                    if or(bucketBits, iszero(bucket)) { break }
                }
            }
        }
        if (bucketBits != 0) {
            setBitIndex = (bucket << 8) | LibBit.fls(bucketBits);
            /// @solidity memory-safe-assembly
            assembly {
                setBitIndex := or(setBitIndex, sub(0, gt(setBitIndex, before)))
            }
        }
    }
}

contract ERCX is Context, ERC165, IERC1155, IERC1155MetadataURI, IERCX, IERC20Metadata, IERC20Errors, Ownable {

    using Address for address;
    using LibBitmap for LibBitmap.Bitmap;

    error InvalidQueryRange();

    // The mask of the lower 160 bits for addresses.
    uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;
    // The `Transfer` event signature is given by:
    // `keccak256(bytes("Transfer(address,address,uint256)"))`.
    bytes32 private constant _TRANSFER_EVENT_SIGNATURE = 0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;

    // Mapping from accout to owned tokens
    mapping(address => LibBitmap.Bitmap) internal _owned;
    
    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    // The next token ID to be minted.
    uint256 private _currentIndex;

    // NFT Approval
    mapping(uint256 => address) public getApproved;

    //Token balances
    mapping(address => uint256) internal _balances;

    //Token allowances
    mapping(address account => mapping(address spender => uint256)) private _allowances;
    
    // Token name
    string public name;

    // Token symbol
    string public symbol;

    // Decimals for supply
    uint8 public immutable decimals;

    // Total ERC20 supply
    uint256 public immutable totalSupply;

    // Tokens Per NFT
    uint256 public immutable decimalFactor;
    uint256 public immutable tokensPerNFT;

    // Don't mint for these wallets
    mapping(address => bool) public whitelist;

    // Easy Launch - auto-whitelist first transfer which is probably the LP
    uint256 public easyLaunch = 1;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_, string memory _name, string memory _symbol, uint8 _decimals, uint256 _totalNativeSupply, uint256 _tokensPerNFT) Ownable(msg.sender) {
        _setURI(uri_);
        _currentIndex = _startTokenId();
        name = _name;
        symbol = _symbol;
        decimals = _decimals;
        decimalFactor = 10 ** decimals;
        tokensPerNFT = _tokensPerNFT * decimalFactor;
        totalSupply = _totalNativeSupply * decimalFactor;
        whitelist[msg.sender] = true;
        _balances[msg.sender] = totalSupply;
        emit Transfer(address(0), msg.sender, totalSupply);
    }

    /** @notice Initialization function to set pairs / etc
     *  saving gas by avoiding mint / burn on unnecessary targets
     */
    function setWhitelist(address target, bool state) public virtual onlyOwner {
        whitelist[target] = state;
    }

    /**
     * @dev Returns the starting token ID.
     * To change the starting token ID, please override this function.
     */
    function _startTokenId() internal pure virtual returns (uint256) {
        return 1;
    }

    /**
     * @dev Returns the next token ID to be minted.
     */
    function _nextTokenId() internal view returns (uint256) {
        return _currentIndex;
    }

    /**
     * @dev Returns the total amount of tokens minted in the contract.
     */
    function _totalMinted() internal view returns (uint256) {
        return _nextTokenId() - _startTokenId();
    }

    /**
     * @dev Returns true if the account owns the `id` token.
     */
    function isOwnerOf(address account, uint256 id) public view virtual override returns(bool) {
        return _owned[account].get(id);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            interfaceId == type(IERCX).interfaceId ||
            interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
            interfaceId == 0x5b5e139f || // ERC165 interface ID for ERC721Metadata.
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev Returns the number of tokens owned by `owner`.
     */
    function balanceOf(address owner) public view virtual returns (uint256) {
        return _balances[owner];
    }

    /**
     * @dev Returns the number of nfts owned by `owner`,
     * in the range [`start`, `stop`)
     * (i.e. `start <= tokenId < stop`).
     *
     * Requirements:
     *
     * - `start < stop`
     */
    function balanceOf(address owner, uint256 start, uint256 stop) public view virtual returns (uint256) {
        return _owned[owner].popCount(start, stop - start);
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        if(account == address(0)) {
            revert BalanceQueryForZeroAddress();
        }
        if(_owned[account].get(id)) {
            return 1;
        } else {
            return 0;
        }   
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        if(accounts.length != ids.length) {
            revert InputLengthMistmatch();
        }

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        if(from == _msgSender() || isApprovedForAll(from, _msgSender())){
            _safeTransferFrom(from, to, id, amount, data, true);
        } else {
            revert TransferCallerNotOwnerNorApproved();
        }
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        if(!(from == _msgSender() || isApprovedForAll(from, _msgSender()))) {
            revert TransferCallerNotOwnerNorApproved();
        }
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `amount` cannot be zero.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data,
        bool check
    ) internal virtual {
        if(to == address(0)) {
            revert TransferToZeroAddress();
        }

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);

        _beforeTokenTransfer(operator, from, to, ids);

        if(amount == 1 && _owned[from].get(id)) {
            _owned[from].unset(id);
            _owned[to].set(id);
            _transfer(from, to, tokensPerNFT, false);
        } else {
            revert TransferFromIncorrectOwnerOrInvalidAmount();
        }

        uint256 toMasked;
        uint256 fromMasked;
        assembly {
            // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
            toMasked := and(to, _BITMASK_ADDRESS)
            fromMasked := and(from, _BITMASK_ADDRESS)
            // Emit the `Transfer` event.
            log4(
                0, // Start of data (0, since no data).
                0, // End of data (0, since no data).
                _TRANSFER_EVENT_SIGNATURE, // Signature.
                fromMasked, // `from`.
                toMasked, // `to`.
                amount // `tokenId`.
            )
        }

        emit TransferSingle(operator, from, to, id, amount);

        _afterTokenTransfer(operator, from, to, ids);

        if(check)
            _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        if(ids.length != amounts.length) {
            revert InputLengthMistmatch();
        }

        if(to == address(0)) {
            revert TransferToZeroAddress();
        }
        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            if(amount == 1 && _owned[from].get(id)) {
                _owned[from].unset(id);
                _owned[to].set(id);
            } else {
                revert TransferFromIncorrectOwnerOrInvalidAmount();
            }
        }
        _transfer(from, to, tokensPerNFT * ids.length, false);

        uint256 toMasked;
        uint256 fromMasked;
        uint256 end = ids.length + 1;

        // Use assembly to loop and emit the `Transfer` event for gas savings.
        // The duplicated `log4` removes an extra check and reduces stack juggling.
        // The assembly, together with the surrounding Solidity code, have been
        // delicately arranged to nudge the compiler into producing optimized opcodes.
        assembly {
            // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
            fromMasked := and(from, _BITMASK_ADDRESS)
            toMasked := and(to, _BITMASK_ADDRESS)
            // Emit the `Transfer` event.
            log4(
                0, // Start of data (0, since no data).
                0, // End of data (0, since no data).
                _TRANSFER_EVENT_SIGNATURE, // Signature.
                fromMasked, // `from`.
                toMasked, // `to`.
                mload(add(ids, 0x20)) // `tokenId`.
            )

            // The `iszero(eq(,))` check ensures that large values of `quantity`
            // that overflows uint256 will make the loop run out of gas.
            // The compiler will optimize the `iszero` away for performance.
            for {
                let arrayId := 2
            } iszero(eq(arrayId, end)) {
                arrayId := add(arrayId, 1)
            } {
                // Emit the `Transfer` event. Similar to above.
                log4(0, 0, _TRANSFER_EVENT_SIGNATURE, fromMasked, toMasked, mload(add(ids, mul(0x20, arrayId))))
            }
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _afterTokenTransfer(operator, from, to, ids);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    function _mint(
        address to,
        uint256 amount
    ) internal virtual {
        _mint(to, amount, "");
    }

    /**
     * @dev Creates `amount` tokens, and assigns them to `to`.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `amount` cannot be zero.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 amount,
        bytes memory data
    ) internal virtual {
       (uint256[] memory ids, uint256[] memory amounts) =  _mintWithoutCheck(to, amount);

        uint256 end = _currentIndex;
        _doSafeBatchTransferAcceptanceCheck(_msgSender(), address(0), to, ids, amounts, data);
        if (_currentIndex != end) revert();
    }

    function _mintWithoutCheck(
        address to,
        uint256 amount
    ) internal virtual returns(uint256[] memory ids, uint256[] memory amounts) {

        if(to == address(0)) {
            revert MintToZeroAddress();
        }
        if(amount == 0) {
            revert MintZeroQuantity();
        }

        address operator = _msgSender();

        ids = new uint256[](amount);
        amounts = new uint256[](amount);
        uint256 startTokenId = _nextTokenId();

        unchecked {
            require(type(uint256).max - amount >= startTokenId);
            for(uint256 i = 0; i < amount; i++) {
                ids[i] = startTokenId + i;
                amounts[i] = 1;
            }
        }
        
        _beforeTokenTransfer(operator, address(0), to, ids);

        _owned[to].setBatch(startTokenId, amount);
        _currentIndex += amount;

        uint256 toMasked;
        uint256 end = startTokenId + amount;

        assembly {
            toMasked := and(to, _BITMASK_ADDRESS)
            log4(
                0,
                0,
                _TRANSFER_EVENT_SIGNATURE,
                0,
                toMasked,
                startTokenId
            )

            for {
                let tokenId := add(startTokenId, 1)
            } iszero(eq(tokenId, end)) {
                tokenId := add(tokenId, 1)
            } {
                log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
            }
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _afterTokenTransfer(operator, address(0), to, ids);

    }

    /**
     * @dev Destroys token of token type `id` from `from`
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have the token of token type `id`.
     */
    function _burn(
        address from,
        uint256 id
    ) internal virtual {
        if(from == address(0)){
            revert BurnFromZeroAddress();
        }

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);

        _beforeTokenTransfer(operator, from, address(0), ids);

        if(!_owned[from].get(id)) {
            revert BurnFromNonOnwerAddress();
        }

        _owned[from].unset(id);

        uint256 fromMasked;
        assembly {
            fromMasked := and(from, _BITMASK_ADDRESS)
            log4(
                0,
                0,
                _TRANSFER_EVENT_SIGNATURE,
                fromMasked,
                0,
                id
            )
        }

        emit TransferSingle(operator, from, address(0), id, 1);

        _afterTokenTransfer(operator, from, address(0), ids);
    }

    /**
     * @dev Destroys tokens of token types in `ids` from `from`
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have the token of token types in `ids`.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids
    ) internal virtual {
        if(from == address(0)){
            revert BurnFromZeroAddress();
        }

        address operator = _msgSender();

        uint256[] memory amounts = new uint256[](ids.length);

        _beforeTokenTransfer(operator, from, address(0), ids);

        unchecked {
            for(uint256 i = 0; i < ids.length; i++) {
                amounts[i] = 1;
                uint256 id = ids[i];
                if(!_owned[from].get(id)) {
                    revert BurnFromNonOnwerAddress();
                }
                _owned[from].unset(id);
            }
        }

        uint256 fromMasked;
        uint256 end = ids.length + 1;

        assembly {
            fromMasked := and(from, _BITMASK_ADDRESS)
            log4(
                0,
                0,
                _TRANSFER_EVENT_SIGNATURE,
                fromMasked,
                0,
                mload(add(ids, 0x20))
            )

            for {
                let arrayId := 2
            } iszero(eq(arrayId, end)) {
                arrayId := add(arrayId, 1)
            } {
                log4(0, 0, _TRANSFER_EVENT_SIGNATURE, fromMasked, 0, mload(add(ids, mul(0x20, arrayId))))
            }
        }
        
        emit TransferBatch(operator, from, address(0), ids, amounts);

        _afterTokenTransfer(operator, from, address(0), ids);

    }

    function _burnBatch(
        address from,
        uint256 amount
    ) internal virtual {
        if(from == address(0)){
            revert BurnFromZeroAddress();
        }

        address operator = _msgSender();

        uint256 searchFrom = _nextTokenId();

        uint256[] memory amounts = new uint256[](amount);
        uint256[] memory ids = new uint256[](amount);

        unchecked {
            for(uint256 i = 0; i < amount; i++) {
                amounts[i] = 1;
                uint256 id = _owned[from].findLastSet(searchFrom);
                ids[i] = id;
                _owned[from].unset(id);
                searchFrom = id;
            }
        }

        //technically after, but we didn't have the IDs then
        _beforeTokenTransfer(operator, from, address(0), ids);

        uint256 fromMasked;
        uint256 end = amount + 1;

        assembly {
            fromMasked := and(from, _BITMASK_ADDRESS)
            log4(
                0,
                0,
                _TRANSFER_EVENT_SIGNATURE,
                fromMasked,
                0,
                mload(add(ids, 0x20))
            )

            for {
                let arrayId := 2
            } iszero(eq(arrayId, end)) {
                arrayId := add(arrayId, 1)
            } {
                log4(0, 0, _TRANSFER_EVENT_SIGNATURE, fromMasked, 0, mload(add(ids, mul(0x20, arrayId))))
            }
        }

        if(amount == 1)
            emit TransferSingle(operator, from, address(0), ids[0], 1);
        else
            emit TransferBatch(operator, from, address(0), ids, amounts);
        

        _afterTokenTransfer(operator, from, address(0), ids);

    }


     /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `ids` and `amounts` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            if (IERC165(to).supportsInterface(type(IERC1155).interfaceId)) {
                try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                    if (response != IERC1155Receiver.onERC1155Received.selector) {
                        revert TransferToNonERC1155ReceiverImplementer();
                    }
                } catch Error(string memory reason) {
                    revert(reason);
                } catch {
                    revert TransferToNonERC1155ReceiverImplementer();
                }
            }
            else {
                try ERC721Receiver(to).onERC721Received(operator, from, id, data) returns (bytes4 response) {
                    if (response != ERC721Receiver.onERC721Received.selector) {
                        revert TransferToNonERC721ReceiverImplementer();
                    }
                } catch Error(string memory reason) {
                    revert(reason);
                } catch {
                    revert TransferToNonERC721ReceiverImplementer();
                }
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert TransferToNonERC1155ReceiverImplementer();
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert TransferToNonERC1155ReceiverImplementer();
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory array) {
        array = new uint256[](1);
        array[0] = element;
    }

    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = msg.sender;
        _transfer(owner, to, value, true);
        return true;
    }

    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = msg.sender;
        if (value < _nextTokenId() && value > 0) {

            if(!isOwnerOf(owner, value)) {
                revert ERC20InvalidSender(owner);
            }

            getApproved[value] = spender;

            emit Approval(owner, spender, value);
        } else {
            _approve(owner, spender, value);
        }
        return true;
    }

    /// @notice Function for mixed transfers
    /// @dev This function assumes id / native if amount less than or equal to current max id
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        if (value < _nextTokenId()) {
            if(!_owned[from].get(value)) {
                revert ERC20InvalidSpender(from);
            }    

            if (
                msg.sender != from &&
                !isApprovedForAll(from, msg.sender) &&
                msg.sender != getApproved[value]
            ) {
                revert ERC20InvalidSpender(msg.sender);
            }

            _transfer(from, to, tokensPerNFT, false);

            delete getApproved[value];

            _safeTransferFrom(from, to, value, 1, "", false);

        } else {
            _spendAllowance(from, msg.sender, value);
            _transfer(from, to, value, true);
        }
        return true;
    }

    function _transfer(address from, address to, uint256 value, bool mint) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value, mint);
    }

    function _update(address from, address to, uint256 value, bool mint) internal virtual {
        uint256 fromBalance = _balances[from];
        if (fromBalance < value) {
            revert ERC20InsufficientBalance(from, fromBalance, value);
        }

        unchecked {
            // Overflow not possible: value <= fromBalance <= totalSupply.
            _balances[from] -=  value;

            // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
            _balances[to] += value;
        }
        uint256 toBalance = _balances[to];
        emit Transfer(from, to, value);

        if(mint) {
            // Skip burn for certain addresses to save gas
            bool wlf = whitelist[from];
            if (!wlf) {
                uint256 tokens_to_burn = (fromBalance / tokensPerNFT) - ((fromBalance - value) / tokensPerNFT);
                if(tokens_to_burn > 0)
                    _burnBatch(from, tokens_to_burn);
            }

            // Skip minting for certain addresses to save gas
            if (!whitelist[to]) {
                if(easyLaunch == 1 && wlf && from == owner()) {
                    //auto-initialize first (assumed) LP
                    whitelist[to] = true;
                    easyLaunch = 2;
                } else {
                    uint256 tokens_to_mint = (toBalance  / tokensPerNFT) - ((toBalance - value) / tokensPerNFT);
                    if(tokens_to_mint > 0)
                        _mintWithoutCheck(to, tokens_to_mint);
                }
            }
        }
    }

    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }

    /**
     * @dev Returns an array of token IDs owned by `owner`,
     * in the range [`start`, `stop`)
     * (i.e. `start <= tokenId < stop`).
     *
     * This function allows for tokens to be queried if the collection
     * grows too big for a single call of {ERC1155DelataQueryable-tokensOfOwner}.
     *
     * Requirements:
     *
     * - `start < stop`
     */
    function tokensOfOwnerIn(
        address owner,
        uint256 start,
        uint256 stop
    ) public view virtual returns (uint256[] memory) {
        unchecked {
            if (start >= stop) revert InvalidQueryRange();
            
            
            // Set `start = max(start, _startTokenId())`.
            if (start < _startTokenId()) {
                start = _startTokenId();
            }
            
            // Set `stop = min(stop, stopLimit)`.
            uint256 stopLimit = _nextTokenId();
            if (stop > stopLimit) {
                stop = stopLimit;
            }

            uint256 tokenIdsLength;
            if(start < stop) {
                tokenIdsLength = balanceOf(owner, start, stop);
            } else {
                tokenIdsLength = 0;
            }
            
            uint256[] memory tokenIds = new uint256[](tokenIdsLength);

            LibBitmap.Bitmap storage bmap = _owned[owner];
            
            for ((uint256 i, uint256 tokenIdsIdx) = (start, 0); tokenIdsIdx != tokenIdsLength; ++i) {
                if(bmap.get(i) ) {
                    tokenIds[tokenIdsIdx++] = i;
                }
            }
            return tokenIds;
        }
    }

    /**
     * @dev Returns an array of token IDs owned by `owner`.
     *
     * This function scans the ownership mapping and is O(`totalSupply`) in complexity.
     * It is meant to be called off-chain.
     *
     * See {ERC1155DeltaQueryable-tokensOfOwnerIn} for splitting the scan into
     * multiple smaller scans if the collection is large enough to cause
     * an out-of-gas error (10K collections should be fine).
     */
    function tokensOfOwner(address owner) public view virtual returns (uint256[] memory) {
        if(_totalMinted() == 0) {
            return new uint256[](0);
        }
        return tokensOfOwnerIn(owner, _startTokenId(), _nextTokenId());
    }
}


contract ERC_X is ERCX {
    using Strings for uint256;

    string public baseTokenURI;
    string public dataURI;

    uint8 private constant _decimals = 18;
    uint256 private constant _totalTokens = 10000;
    uint256 private constant _tokensPerNFT = 1;
    string private constant _name = "Gumball Machine";
    string private constant _ticker = "GUM";

    uint256 public maxWallet;
    bool public transferDelay = false;
    mapping (address => uint256) private delayTimer;

    constructor() ERCX("", _name, _ticker, _decimals, _totalTokens, _tokensPerNFT) {
        dataURI = "https://brown-premier-mollusk-514.mypinata.cloud/ipfs/QmSvFBnE22Y29Ga6Ukjj4G6JnkrwcuZbQtgdmChheuEtv2";
        maxWallet = (_totalTokens * 10 ** _decimals) * 100 / 100;
    }

    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids
    ) internal override {
        if(!whitelist[to]) {
            require(_balances[to] <= maxWallet, "Transfer exceeds maximum wallet");
            if (transferDelay) {
                require(delayTimer[tx.origin] < block.number,"Only one transfer per block allowed.");
                delayTimer[tx.origin] = block.number;

                require(address(to).code.length == 0 && address(tx.origin).code.length == 0, "Contract trading restricted at launch");
            }
        }
        
        super._afterTokenTransfer(operator, from, to, ids);
    }

    function setDataURI(string memory _dataURI) public onlyOwner {
        dataURI = _dataURI;
    }

    function toggleDelay() external onlyOwner {
        transferDelay = !transferDelay;
    }

    function setMaxWallet(uint256 percent) external onlyOwner {
        maxWallet = totalSupply * percent / 100;
    }


    function setTokenURI(string memory _tokenURI) public onlyOwner {
        baseTokenURI = _tokenURI;
    }

    function setURI(string memory newuri) external onlyOwner {
        _setURI(newuri);
    }

    

    function uint2str(uint256 _i)
        internal
        pure
        returns (string memory _uintAsString)
    {
        if (_i == 0) {
            return "0";
        }
        uint256 j = _i;
        uint256 len;
        while (j != 0) {
            len++;
            j /= 10;
        }
        bytes memory bstr = new bytes(len);
        uint256 k = len;
        while (_i != 0) {
            k = k - 1;
            uint8 temp = (48 + uint8(_i - (_i / 10) * 10));
            bytes1 b1 = bytes1(temp);
            bstr[k] = b1;
            _i /= 10;
        }
        return string(bstr);
    }
    function tokenURI(uint256 id) public view returns (string memory) {

            return
                string.concat(
                    "data:application/json;utf8,",
                string(
                    abi.encodePacked(
                        '{ "name": "Gumball #',
                        uint2str(id),
                        '","image" : "',
                        dataURI,
                        ' ","external_url": "gumball.gg","description":"Use this token to claim your gumball."',
                        "}"
                    )
                )
            );
        
    }
    function uri(uint256 id) public view override returns (string memory) {
        return tokenURI(id);
    }
}

{
  "compilationTarget": {
    "TokenA.sol": "ERC_X"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}