// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

/// @title ErrorsLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library exposing error messages.
library ErrorsLib {
    /// @notice Thrown when the caller is not the owner.
    string internal constant NOT_OWNER = "not owner";

    /// @notice Thrown when the LLTV to enable exceeds the maximum LLTV.
    string internal constant MAX_LLTV_EXCEEDED = "max LLTV exceeded";

    /// @notice Thrown when the fee to set exceeds the maximum fee.
    string internal constant MAX_FEE_EXCEEDED = "max fee exceeded";

    /// @notice Thrown when the value is already set.
    string internal constant ALREADY_SET = "already set";

    /// @notice Thrown when the IRM is not enabled at market creation.
    string internal constant IRM_NOT_ENABLED = "IRM not enabled";

    /// @notice Thrown when the LLTV is not enabled at market creation.
    string internal constant LLTV_NOT_ENABLED = "LLTV not enabled";

    /// @notice Thrown when the market is already created.
    string internal constant MARKET_ALREADY_CREATED = "market already created";

    /// @notice Thrown when a token to transfer doesn't have code.
    string internal constant NO_CODE = "no code";

    /// @notice Thrown when the market is not created.
    string internal constant MARKET_NOT_CREATED = "market not created";

    /// @notice Thrown when not exactly one of the input amount is zero.
    string internal constant INCONSISTENT_INPUT = "inconsistent input";

    /// @notice Thrown when zero assets is passed as input.
    string internal constant ZERO_ASSETS = "zero assets";

    /// @notice Thrown when a zero address is passed as input.
    string internal constant ZERO_ADDRESS = "zero address";

    /// @notice Thrown when the caller is not authorized to conduct an action.
    string internal constant UNAUTHORIZED = "unauthorized";

    /// @notice Thrown when the collateral is insufficient to `borrow` or `withdrawCollateral`.
    string internal constant INSUFFICIENT_COLLATERAL = "insufficient collateral";

    /// @notice Thrown when the liquidity is insufficient to `withdraw` or `borrow`.
    string internal constant INSUFFICIENT_LIQUIDITY = "insufficient liquidity";

    /// @notice Thrown when the position to liquidate is healthy.
    string internal constant HEALTHY_POSITION = "position is healthy";

    /// @notice Thrown when the authorization signature is invalid.
    string internal constant INVALID_SIGNATURE = "invalid signature";

    /// @notice Thrown when the authorization signature is expired.
    string internal constant SIGNATURE_EXPIRED = "signature expired";

    /// @notice Thrown when the nonce is invalid.
    string internal constant INVALID_NONCE = "invalid nonce";

    /// @notice Thrown when a token transfer reverted.
    string internal constant TRANSFER_REVERTED = "transfer reverted";

    /// @notice Thrown when a token transfer returned false.
    string internal constant TRANSFER_RETURNED_FALSE = "transfer returned false";

    /// @notice Thrown when a token transferFrom reverted.
    string internal constant TRANSFER_FROM_REVERTED = "transferFrom reverted";

    /// @notice Thrown when a token transferFrom returned false
    string internal constant TRANSFER_FROM_RETURNED_FALSE = "transferFrom returned false";

    /// @notice Thrown when the maximum uint128 is exceeded.
    string internal constant MAX_UINT128_EXCEEDED = "max uint128 exceeded";
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {FlowCapsConfig, Id} from "../interfaces/IPublicAllocator.sol";

/// @title EventsLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library exposing events.
library EventsLib {
    /// @notice Emitted during a public reallocation for each withdrawn-from market.
    event PublicWithdrawal(address indexed sender, address indexed vault, Id indexed id, uint256 withdrawnAssets);

    /// @notice Emitted at the end of a public reallocation.
    event PublicReallocateTo(
        address indexed sender, address indexed vault, Id indexed supplyMarketId, uint256 suppliedAssets
    );

    /// @notice Emitted when the admin is set for a vault.
    event SetAdmin(address indexed sender, address indexed vault, address admin);

    /// @notice Emitted when the fee is set for a vault.
    event SetFee(address indexed sender, address indexed vault, uint256 fee);

    /// @notice Emitted when the fee is transfered for a vault.
    event TransferFee(address indexed sender, address indexed vault, uint256 amount, address indexed feeRecipient);

    /// @notice Emitted when the flow caps are set for a vault.
    event SetFlowCaps(address indexed sender, address indexed vault, FlowCapsConfig[] config);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import {MarketParams, Market} from "./IMorpho.sol";

/// @title IIrm
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Interface that Interest Rate Models (IRMs) used by Morpho must implement.
interface IIrm {
    /// @notice Returns the borrow rate per second (scaled by WAD) of the market `marketParams`.
    /// @dev Assumes that `market` corresponds to `marketParams`.
    function borrowRate(MarketParams memory marketParams, Market memory market) external returns (uint256);

    /// @notice Returns the borrow rate per second (scaled by WAD) of the market `marketParams` without modifying any
    /// storage.
    /// @dev Assumes that `market` corresponds to `marketParams`.
    function borrowRateView(MarketParams memory marketParams, Market memory market) external view returns (uint256);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import {IMorpho, Id, MarketParams} from "../../lib/morpho-blue/src/interfaces/IMorpho.sol";
import {IERC4626} from "../../lib/openzeppelin-contracts/contracts/interfaces/IERC4626.sol";
import {IERC20Permit} from "../../lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Permit.sol";

import {MarketConfig, PendingUint192, PendingAddress} from "../libraries/PendingLib.sol";

struct MarketAllocation {
    /// @notice The market to allocate.
    MarketParams marketParams;
    /// @notice The amount of assets to allocate.
    uint256 assets;
}

interface IMulticall {
    function multicall(bytes[] calldata) external returns (bytes[] memory);
}

interface IOwnable {
    function owner() external view returns (address);
    function transferOwnership(address) external;
    function renounceOwnership() external;
    function acceptOwnership() external;
    function pendingOwner() external view returns (address);
}

/// @dev This interface is used for factorizing IMetaMorphoStaticTyping and IMetaMorpho.
/// @dev Consider using the IMetaMorpho interface instead of this one.
interface IMetaMorphoBase {
    /// @notice The address of the Morpho contract.
    function MORPHO() external view returns (IMorpho);
    function DECIMALS_OFFSET() external view returns (uint8);

    /// @notice The address of the curator.
    function curator() external view returns (address);

    /// @notice Stores whether an address is an allocator or not.
    function isAllocator(address target) external view returns (bool);

    /// @notice The current guardian. Can be set even without the timelock set.
    function guardian() external view returns (address);

    /// @notice The current fee.
    function fee() external view returns (uint96);

    /// @notice The fee recipient.
    function feeRecipient() external view returns (address);

    /// @notice The skim recipient.
    function skimRecipient() external view returns (address);

    /// @notice The current timelock.
    function timelock() external view returns (uint256);

    /// @dev Stores the order of markets on which liquidity is supplied upon deposit.
    /// @dev Can contain any market. A market is skipped as soon as its supply cap is reached.
    function supplyQueue(uint256) external view returns (Id);

    /// @notice Returns the length of the supply queue.
    function supplyQueueLength() external view returns (uint256);

    /// @dev Stores the order of markets from which liquidity is withdrawn upon withdrawal.
    /// @dev Always contain all non-zero cap markets as well as all markets on which the vault supplies liquidity,
    /// without duplicate.
    function withdrawQueue(uint256) external view returns (Id);

    /// @notice Returns the length of the withdraw queue.
    function withdrawQueueLength() external view returns (uint256);

    /// @notice Stores the total assets managed by this vault when the fee was last accrued.
    /// @dev May be greater than `totalAssets()` due to removal of markets with non-zero supply or socialized bad debt.
    /// This difference will decrease the fee accrued until one of the functions updating `lastTotalAssets` is
    /// triggered (deposit/mint/withdraw/redeem/setFee/setFeeRecipient).
    function lastTotalAssets() external view returns (uint256);

    /// @notice Submits a `newTimelock`.
    /// @dev Warning: Reverts if a timelock is already pending. Revoke the pending timelock to overwrite it.
    /// @dev In case the new timelock is higher than the current one, the timelock is set immediately.
    function submitTimelock(uint256 newTimelock) external;

    /// @notice Accepts the pending timelock.
    function acceptTimelock() external;

    /// @notice Revokes the pending timelock.
    /// @dev Does not revert if there is no pending timelock.
    function revokePendingTimelock() external;

    /// @notice Submits a `newSupplyCap` for the market defined by `marketParams`.
    /// @dev Warning: Reverts if a cap is already pending. Revoke the pending cap to overwrite it.
    /// @dev Warning: Reverts if a market removal is pending.
    /// @dev In case the new cap is lower than the current one, the cap is set immediately.
    function submitCap(MarketParams memory marketParams, uint256 newSupplyCap) external;

    /// @notice Accepts the pending cap of the market defined by `marketParams`.
    function acceptCap(MarketParams memory marketParams) external;

    /// @notice Revokes the pending cap of the market defined by `id`.
    /// @dev Does not revert if there is no pending cap.
    function revokePendingCap(Id id) external;

    /// @notice Submits a forced market removal from the vault, eventually losing all funds supplied to the market.
    /// @notice Funds can be recovered by enabling this market again and withdrawing from it (using `reallocate`),
    /// but funds will be distributed pro-rata to the shares at the time of withdrawal, not at the time of removal.
    /// @notice This forced removal is expected to be used as an emergency process in case a market constantly reverts.
    /// To softly remove a sane market, the curator role is expected to bundle a reallocation that empties the market
    /// first (using `reallocate`), followed by the removal of the market (using `updateWithdrawQueue`).
    /// @dev Warning: Removing a market with non-zero supply will instantly impact the vault's price per share.
    /// @dev Warning: Reverts for non-zero cap or if there is a pending cap. Successfully submitting a zero cap will
    /// prevent such reverts.
    function submitMarketRemoval(MarketParams memory marketParams) external;

    /// @notice Revokes the pending removal of the market defined by `id`.
    /// @dev Does not revert if there is no pending market removal.
    function revokePendingMarketRemoval(Id id) external;

    /// @notice Submits a `newGuardian`.
    /// @notice Warning: a malicious guardian could disrupt the vault's operation, and would have the power to revoke
    /// any pending guardian.
    /// @dev In case there is no guardian, the gardian is set immediately.
    /// @dev Warning: Submitting a gardian will overwrite the current pending gardian.
    function submitGuardian(address newGuardian) external;

    /// @notice Accepts the pending guardian.
    function acceptGuardian() external;

    /// @notice Revokes the pending guardian.
    function revokePendingGuardian() external;

    /// @notice Skims the vault `token` balance to `skimRecipient`.
    function skim(address) external;

    /// @notice Sets `newAllocator` as an allocator or not (`newIsAllocator`).
    function setIsAllocator(address newAllocator, bool newIsAllocator) external;

    /// @notice Sets `curator` to `newCurator`.
    function setCurator(address newCurator) external;

    /// @notice Sets the `fee` to `newFee`.
    function setFee(uint256 newFee) external;

    /// @notice Sets `feeRecipient` to `newFeeRecipient`.
    function setFeeRecipient(address newFeeRecipient) external;

    /// @notice Sets `skimRecipient` to `newSkimRecipient`.
    function setSkimRecipient(address newSkimRecipient) external;

    /// @notice Sets `supplyQueue` to `newSupplyQueue`.
    /// @param newSupplyQueue is an array of enabled markets, and can contain duplicate markets, but it would only
    /// increase the cost of depositing to the vault.
    function setSupplyQueue(Id[] calldata newSupplyQueue) external;

    /// @notice Updates the withdraw queue. Some markets can be removed, but no market can be added.
    /// @notice Removing a market requires the vault to have 0 supply on it, or to have previously submitted a removal
    /// for this market (with the function `submitMarketRemoval`).
    /// @notice Warning: Anyone can supply on behalf of the vault so the call to `updateWithdrawQueue` that expects a
    /// market to be empty can be griefed by a front-run. To circumvent this, the allocator can simply bundle a
    /// reallocation that withdraws max from this market with a call to `updateWithdrawQueue`.
    /// @dev Warning: Removing a market with supply will decrease the fee accrued until one of the functions updating
    /// `lastTotalAssets` is triggered (deposit/mint/withdraw/redeem/setFee/setFeeRecipient).
    /// @dev Warning: `updateWithdrawQueue` is not idempotent. Submitting twice the same tx will change the queue twice.
    /// @param indexes The indexes of each market in the previous withdraw queue, in the new withdraw queue's order.
    function updateWithdrawQueue(uint256[] calldata indexes) external;

    /// @notice Reallocates the vault's liquidity so as to reach a given allocation of assets on each given market.
    /// @notice The allocator can withdraw from any market, even if it's not in the withdraw queue, as long as the loan
    /// token of the market is the same as the vault's asset.
    /// @dev The behavior of the reallocation can be altered by state changes, including:
    /// - Deposits on the vault that supplies to markets that are expected to be supplied to during reallocation.
    /// - Withdrawals from the vault that withdraws from markets that are expected to be withdrawn from during
    /// reallocation.
    /// - Donations to the vault on markets that are expected to be supplied to during reallocation.
    /// - Withdrawals from markets that are expected to be withdrawn from during reallocation.
    /// @dev Sender is expected to pass `assets = type(uint256).max` with the last MarketAllocation of `allocations` to
    /// supply all the remaining withdrawn liquidity, which would ensure that `totalWithdrawn` = `totalSupplied`.
    function reallocate(MarketAllocation[] calldata allocations) external;
}

/// @dev This interface is inherited by MetaMorpho so that function signatures are checked by the compiler.
/// @dev Consider using the IMetaMorpho interface instead of this one.
interface IMetaMorphoStaticTyping is IMetaMorphoBase {
    /// @notice Returns the current configuration of each market.
    function config(Id) external view returns (uint184 cap, bool enabled, uint64 removableAt);

    /// @notice Returns the pending guardian.
    function pendingGuardian() external view returns (address guardian, uint64 validAt);

    /// @notice Returns the pending cap for each market.
    function pendingCap(Id) external view returns (uint192 value, uint64 validAt);

    /// @notice Returns the pending timelock.
    function pendingTimelock() external view returns (uint192 value, uint64 validAt);
}

/// @title IMetaMorpho
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @dev Use this interface for MetaMorpho to have access to all the functions with the appropriate function signatures.
interface IMetaMorpho is IMetaMorphoBase, IERC4626, IERC20Permit, IOwnable, IMulticall {
    /// @notice Returns the current configuration of each market.
    function config(Id) external view returns (MarketConfig memory);

    /// @notice Returns the pending guardian.
    function pendingGuardian() external view returns (PendingAddress memory);

    /// @notice Returns the pending cap for each market.
    function pendingCap(Id) external view returns (PendingUint192 memory);

    /// @notice Returns the pending timelock.
    function pendingTimelock() external view returns (PendingUint192 memory);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

type Id is bytes32;

struct MarketParams {
    address loanToken;
    address collateralToken;
    address oracle;
    address irm;
    uint256 lltv;
}

/// @dev Warning: For `feeRecipient`, `supplyShares` does not contain the accrued shares since the last interest
/// accrual.
struct Position {
    uint256 supplyShares;
    uint128 borrowShares;
    uint128 collateral;
}

/// @dev Warning: `totalSupplyAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `totalBorrowAssets` does not contain the accrued interest since the last interest accrual.
/// @dev Warning: `totalSupplyShares` does not contain the additional shares accrued by `feeRecipient` since the last
/// interest accrual.
struct Market {
    uint128 totalSupplyAssets;
    uint128 totalSupplyShares;
    uint128 totalBorrowAssets;
    uint128 totalBorrowShares;
    uint128 lastUpdate;
    uint128 fee;
}

struct Authorization {
    address authorizer;
    address authorized;
    bool isAuthorized;
    uint256 nonce;
    uint256 deadline;
}

struct Signature {
    uint8 v;
    bytes32 r;
    bytes32 s;
}

/// @dev This interface is used for factorizing IMorphoStaticTyping and IMorpho.
/// @dev Consider using the IMorpho interface instead of this one.
interface IMorphoBase {
    /// @notice The EIP-712 domain separator.
    /// @dev Warning: Every EIP-712 signed message based on this domain separator can be reused on another chain sharing
    /// the same chain id because the domain separator would be the same.
    function DOMAIN_SEPARATOR() external view returns (bytes32);

    /// @notice The owner of the contract.
    /// @dev It has the power to change the owner.
    /// @dev It has the power to set fees on markets and set the fee recipient.
    /// @dev It has the power to enable but not disable IRMs and LLTVs.
    function owner() external view returns (address);

    /// @notice The fee recipient of all markets.
    /// @dev The recipient receives the fees of a given market through a supply position on that market.
    function feeRecipient() external view returns (address);

    /// @notice Whether the `irm` is enabled.
    function isIrmEnabled(address irm) external view returns (bool);

    /// @notice Whether the `lltv` is enabled.
    function isLltvEnabled(uint256 lltv) external view returns (bool);

    /// @notice Whether `authorized` is authorized to modify `authorizer`'s position on all markets.
    /// @dev Anyone is authorized to modify their own positions, regardless of this variable.
    function isAuthorized(address authorizer, address authorized) external view returns (bool);

    /// @notice The `authorizer`'s current nonce. Used to prevent replay attacks with EIP-712 signatures.
    function nonce(address authorizer) external view returns (uint256);

    /// @notice Sets `newOwner` as `owner` of the contract.
    /// @dev Warning: No two-step transfer ownership.
    /// @dev Warning: The owner can be set to the zero address.
    function setOwner(address newOwner) external;

    /// @notice Enables `irm` as a possible IRM for market creation.
    /// @dev Warning: It is not possible to disable an IRM.
    function enableIrm(address irm) external;

    /// @notice Enables `lltv` as a possible LLTV for market creation.
    /// @dev Warning: It is not possible to disable a LLTV.
    function enableLltv(uint256 lltv) external;

    /// @notice Sets the `newFee` for the given market `marketParams`.
    /// @param newFee The new fee, scaled by WAD.
    /// @dev Warning: The recipient can be the zero address.
    function setFee(MarketParams memory marketParams, uint256 newFee) external;

    /// @notice Sets `newFeeRecipient` as `feeRecipient` of the fee.
    /// @dev Warning: If the fee recipient is set to the zero address, fees will accrue there and will be lost.
    /// @dev Modifying the fee recipient will allow the new recipient to claim any pending fees not yet accrued. To
    /// ensure that the current recipient receives all due fees, accrue interest manually prior to making any changes.
    function setFeeRecipient(address newFeeRecipient) external;

    /// @notice Creates the market `marketParams`.
    /// @dev Here is the list of assumptions on the market's dependencies (tokens, IRM and oracle) that guarantees
    /// Morpho behaves as expected:
    /// - The token should be ERC-20 compliant, except that it can omit return values on `transfer` and `transferFrom`.
    /// - The token balance of Morpho should only decrease on `transfer` and `transferFrom`. In particular, tokens with
    /// burn functions are not supported.
    /// - The token should not re-enter Morpho on `transfer` nor `transferFrom`.
    /// - The token balance of the sender (resp. receiver) should decrease (resp. increase) by exactly the given amount
    /// on `transfer` and `transferFrom`. In particular, tokens with fees on transfer are not supported.
    /// - The IRM should not re-enter Morpho.
    /// - The oracle should return a price with the correct scaling.
    /// @dev Here is a list of properties on the market's dependencies that could break Morpho's liveness properties
    /// (funds could get stuck):
    /// - The token can revert on `transfer` and `transferFrom` for a reason other than an approval or balance issue.
    /// - A very high amount of assets (~1e35) supplied or borrowed can make the computation of `toSharesUp` and
    /// `toSharesDown` overflow.
    /// - The IRM can revert on `borrowRate`.
    /// - A very high borrow rate returned by the IRM can make the computation of `interest` in `_accrueInterest`
    /// overflow.
    /// - The oracle can revert on `price`. Note that this can be used to prevent `borrow`, `withdrawCollateral` and
    /// `liquidate` from being used under certain market conditions.
    /// - A very high price returned by the oracle can make the computation of `maxBorrow` in `_isHealthy` overflow, or
    /// the computation of `assetsRepaid` in `liquidate` overflow.
    /// @dev The borrow share price of a market with less than 1e4 assets borrowed can be decreased by manipulations, to
    /// the point where `totalBorrowShares` is very large and borrowing overflows.
    function createMarket(MarketParams memory marketParams) external;

    /// @notice Supplies `assets` or `shares` on behalf of `onBehalf`, optionally calling back the caller's
    /// `onMorphoSupply` function with the given `data`.
    /// @dev Either `assets` or `shares` should be zero. Most use cases should rely on `assets` as an input so the
    /// caller is guaranteed to have `assets` tokens pulled from their balance, but the possibility to mint a specific
    /// amount of shares is given for full compatibility and precision.
    /// @dev Supplying a large amount can revert for overflow.
    /// @dev Supplying an amount of shares may lead to supply more or fewer assets than expected due to slippage.
    /// Consider using the `assets` parameter to avoid this.
    /// @param marketParams The market to supply assets to.
    /// @param assets The amount of assets to supply.
    /// @param shares The amount of shares to mint.
    /// @param onBehalf The address that will own the increased supply position.
    /// @param data Arbitrary data to pass to the `onMorphoSupply` callback. Pass empty data if not needed.
    /// @return assetsSupplied The amount of assets supplied.
    /// @return sharesSupplied The amount of shares minted.
    function supply(
        MarketParams memory marketParams,
        uint256 assets,
        uint256 shares,
        address onBehalf,
        bytes memory data
    ) external returns (uint256 assetsSupplied, uint256 sharesSupplied);

    /// @notice Withdraws `assets` or `shares` on behalf of `onBehalf` and sends the assets to `receiver`.
    /// @dev Either `assets` or `shares` should be zero. To withdraw max, pass the `shares`'s balance of `onBehalf`.
    /// @dev `msg.sender` must be authorized to manage `onBehalf`'s positions.
    /// @dev Withdrawing an amount corresponding to more shares than supplied will revert for underflow.
    /// @dev It is advised to use the `shares` input when withdrawing the full position to avoid reverts due to
    /// conversion roundings between shares and assets.
    /// @param marketParams The market to withdraw assets from.
    /// @param assets The amount of assets to withdraw.
    /// @param shares The amount of shares to burn.
    /// @param onBehalf The address of the owner of the supply position.
    /// @param receiver The address that will receive the withdrawn assets.
    /// @return assetsWithdrawn The amount of assets withdrawn.
    /// @return sharesWithdrawn The amount of shares burned.
    function withdraw(
        MarketParams memory marketParams,
        uint256 assets,
        uint256 shares,
        address onBehalf,
        address receiver
    ) external returns (uint256 assetsWithdrawn, uint256 sharesWithdrawn);

    /// @notice Borrows `assets` or `shares` on behalf of `onBehalf` and sends the assets to `receiver`.
    /// @dev Either `assets` or `shares` should be zero. Most use cases should rely on `assets` as an input so the
    /// caller is guaranteed to borrow `assets` of tokens, but the possibility to mint a specific amount of shares is
    /// given for full compatibility and precision.
    /// @dev `msg.sender` must be authorized to manage `onBehalf`'s positions.
    /// @dev Borrowing a large amount can revert for overflow.
    /// @dev Borrowing an amount of shares may lead to borrow fewer assets than expected due to slippage.
    /// Consider using the `assets` parameter to avoid this.
    /// @param marketParams The market to borrow assets from.
    /// @param assets The amount of assets to borrow.
    /// @param shares The amount of shares to mint.
    /// @param onBehalf The address that will own the increased borrow position.
    /// @param receiver The address that will receive the borrowed assets.
    /// @return assetsBorrowed The amount of assets borrowed.
    /// @return sharesBorrowed The amount of shares minted.
    function borrow(
        MarketParams memory marketParams,
        uint256 assets,
        uint256 shares,
        address onBehalf,
        address receiver
    ) external returns (uint256 assetsBorrowed, uint256 sharesBorrowed);

    /// @notice Repays `assets` or `shares` on behalf of `onBehalf`, optionally calling back the caller's
    /// `onMorphoReplay` function with the given `data`.
    /// @dev Either `assets` or `shares` should be zero. To repay max, pass the `shares`'s balance of `onBehalf`.
    /// @dev Repaying an amount corresponding to more shares than borrowed will revert for underflow.
    /// @dev It is advised to use the `shares` input when repaying the full position to avoid reverts due to conversion
    /// roundings between shares and assets.
    /// @dev An attacker can front-run a repay with a small repay making the transaction revert for underflow.
    /// @param marketParams The market to repay assets to.
    /// @param assets The amount of assets to repay.
    /// @param shares The amount of shares to burn.
    /// @param onBehalf The address of the owner of the debt position.
    /// @param data Arbitrary data to pass to the `onMorphoRepay` callback. Pass empty data if not needed.
    /// @return assetsRepaid The amount of assets repaid.
    /// @return sharesRepaid The amount of shares burned.
    function repay(
        MarketParams memory marketParams,
        uint256 assets,
        uint256 shares,
        address onBehalf,
        bytes memory data
    ) external returns (uint256 assetsRepaid, uint256 sharesRepaid);

    /// @notice Supplies `assets` of collateral on behalf of `onBehalf`, optionally calling back the caller's
    /// `onMorphoSupplyCollateral` function with the given `data`.
    /// @dev Interest are not accrued since it's not required and it saves gas.
    /// @dev Supplying a large amount can revert for overflow.
    /// @param marketParams The market to supply collateral to.
    /// @param assets The amount of collateral to supply.
    /// @param onBehalf The address that will own the increased collateral position.
    /// @param data Arbitrary data to pass to the `onMorphoSupplyCollateral` callback. Pass empty data if not needed.
    function supplyCollateral(MarketParams memory marketParams, uint256 assets, address onBehalf, bytes memory data)
        external;

    /// @notice Withdraws `assets` of collateral on behalf of `onBehalf` and sends the assets to `receiver`.
    /// @dev `msg.sender` must be authorized to manage `onBehalf`'s positions.
    /// @dev Withdrawing an amount corresponding to more collateral than supplied will revert for underflow.
    /// @param marketParams The market to withdraw collateral from.
    /// @param assets The amount of collateral to withdraw.
    /// @param onBehalf The address of the owner of the collateral position.
    /// @param receiver The address that will receive the collateral assets.
    function withdrawCollateral(MarketParams memory marketParams, uint256 assets, address onBehalf, address receiver)
        external;

    /// @notice Liquidates the given `repaidShares` of debt asset or seize the given `seizedAssets` of collateral on the
    /// given market `marketParams` of the given `borrower`'s position, optionally calling back the caller's
    /// `onMorphoLiquidate` function with the given `data`.
    /// @dev Either `seizedAssets` or `repaidShares` should be zero.
    /// @dev Seizing more than the collateral balance will underflow and revert without any error message.
    /// @dev Repaying more than the borrow balance will underflow and revert without any error message.
    /// @dev An attacker can front-run a liquidation with a small repay making the transaction revert for underflow.
    /// @param marketParams The market of the position.
    /// @param borrower The owner of the position.
    /// @param seizedAssets The amount of collateral to seize.
    /// @param repaidShares The amount of shares to repay.
    /// @param data Arbitrary data to pass to the `onMorphoLiquidate` callback. Pass empty data if not needed.
    /// @return The amount of assets seized.
    /// @return The amount of assets repaid.
    function liquidate(
        MarketParams memory marketParams,
        address borrower,
        uint256 seizedAssets,
        uint256 repaidShares,
        bytes memory data
    ) external returns (uint256, uint256);

    /// @notice Executes a flash loan.
    /// @dev Flash loans have access to the whole balance of the contract (the liquidity and deposited collateral of all
    /// markets combined, plus donations).
    /// @dev Warning: Not ERC-3156 compliant but compatibility is easily reached:
    /// - `flashFee` is zero.
    /// - `maxFlashLoan` is the token's balance of this contract.
    /// - The receiver of `assets` is the caller.
    /// @param token The token to flash loan.
    /// @param assets The amount of assets to flash loan.
    /// @param data Arbitrary data to pass to the `onMorphoFlashLoan` callback.
    function flashLoan(address token, uint256 assets, bytes calldata data) external;

    /// @notice Sets the authorization for `authorized` to manage `msg.sender`'s positions.
    /// @param authorized The authorized address.
    /// @param newIsAuthorized The new authorization status.
    function setAuthorization(address authorized, bool newIsAuthorized) external;

    /// @notice Sets the authorization for `authorization.authorized` to manage `authorization.authorizer`'s positions.
    /// @dev Warning: Reverts if the signature has already been submitted.
    /// @dev The signature is malleable, but it has no impact on the security here.
    /// @dev The nonce is passed as argument to be able to revert with a different error message.
    /// @param authorization The `Authorization` struct.
    /// @param signature The signature.
    function setAuthorizationWithSig(Authorization calldata authorization, Signature calldata signature) external;

    /// @notice Accrues interest for the given market `marketParams`.
    function accrueInterest(MarketParams memory marketParams) external;

    /// @notice Returns the data stored on the different `slots`.
    function extSloads(bytes32[] memory slots) external view returns (bytes32[] memory);
}

/// @dev This interface is inherited by Morpho so that function signatures are checked by the compiler.
/// @dev Consider using the IMorpho interface instead of this one.
interface IMorphoStaticTyping is IMorphoBase {
    /// @notice The state of the position of `user` on the market corresponding to `id`.
    /// @dev Warning: For `feeRecipient`, `supplyShares` does not contain the accrued shares since the last interest
    /// accrual.
    function position(Id id, address user)
        external
        view
        returns (uint256 supplyShares, uint128 borrowShares, uint128 collateral);

    /// @notice The state of the market corresponding to `id`.
    /// @dev Warning: `totalSupplyAssets` does not contain the accrued interest since the last interest accrual.
    /// @dev Warning: `totalBorrowAssets` does not contain the accrued interest since the last interest accrual.
    /// @dev Warning: `totalSupplyShares` does not contain the accrued shares by `feeRecipient` since the last interest
    /// accrual.
    function market(Id id)
        external
        view
        returns (
            uint128 totalSupplyAssets,
            uint128 totalSupplyShares,
            uint128 totalBorrowAssets,
            uint128 totalBorrowShares,
            uint128 lastUpdate,
            uint128 fee
        );

    /// @notice The market params corresponding to `id`.
    /// @dev This mapping is not used in Morpho. It is there to enable reducing the cost associated to calldata on layer
    /// 2s by creating a wrapper contract with functions that take `id` as input instead of `marketParams`.
    function idToMarketParams(Id id)
        external
        view
        returns (address loanToken, address collateralToken, address oracle, address irm, uint256 lltv);
}

/// @title IMorpho
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @dev Use this interface for Morpho to have access to all the functions with the appropriate function signatures.
interface IMorpho is IMorphoBase {
    /// @notice The state of the position of `user` on the market corresponding to `id`.
    /// @dev Warning: For `feeRecipient`, `p.supplyShares` does not contain the accrued shares since the last interest
    /// accrual.
    function position(Id id, address user) external view returns (Position memory p);

    /// @notice The state of the market corresponding to `id`.
    /// @dev Warning: `m.totalSupplyAssets` does not contain the accrued interest since the last interest accrual.
    /// @dev Warning: `m.totalBorrowAssets` does not contain the accrued interest since the last interest accrual.
    /// @dev Warning: `m.totalSupplyShares` does not contain the accrued shares by `feeRecipient` since the last
    /// interest accrual.
    function market(Id id) external view returns (Market memory m);

    /// @notice The market params corresponding to `id`.
    /// @dev This mapping is not used in Morpho. It is there to enable reducing the cost associated to calldata on layer
    /// 2s by creating a wrapper contract with functions that take `id` as input instead of `marketParams`.
    function idToMarketParams(Id id) external view returns (MarketParams memory);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

import {
    IMetaMorpho,
    IMorpho,
    MarketAllocation,
    Id,
    MarketParams
} from "../../lib/metamorpho/src/interfaces/IMetaMorpho.sol";

/// @dev Max settable flow cap, such that caps can always be stored on 128 bits.
/// @dev The actual max possible flow cap is type(uint128).max-1.
/// @dev Equals to 170141183460469231731687303715884105727;
uint128 constant MAX_SETTABLE_FLOW_CAP = type(uint128).max / 2;

struct FlowCaps {
    /// @notice The maximum allowed inflow in a market.
    uint128 maxIn;
    /// @notice The maximum allowed outflow in a market.
    uint128 maxOut;
}

struct FlowCapsConfig {
    /// @notice Market for which to change flow caps.
    Id id;
    /// @notice New flow caps for this market.
    FlowCaps caps;
}

struct Withdrawal {
    /// @notice The market from which to withdraw.
    MarketParams marketParams;
    /// @notice The amount to withdraw.
    uint128 amount;
}

/// @dev This interface is used for factorizing IPublicAllocatorStaticTyping and IPublicAllocator.
/// @dev Consider using the IPublicAllocator interface instead of this one.
interface IPublicAllocatorBase {
    /// @notice The Morpho contract.
    function MORPHO() external view returns (IMorpho);

    /// @notice The admin for a given vault.
    function admin(address vault) external view returns (address);

    /// @notice The current ETH fee for a given vault.
    function fee(address vault) external view returns (uint256);

    /// @notice The accrued ETH fee for a given vault.
    function accruedFee(address vault) external view returns (uint256);

    /// @notice Reallocates from a list of markets to one market.
    /// @param vault The MetaMorpho vault to reallocate.
    /// @param withdrawals The markets to withdraw from,and the amounts to withdraw.
    /// @param supplyMarketParams The market receiving total withdrawn to.
    /// @dev Will call MetaMorpho's `reallocate`.
    /// @dev Checks that the flow caps are respected.
    /// @dev Will revert when `withdrawals` contains a duplicate or is not sorted.
    /// @dev Will revert if `withdrawals` contains the supply market.
    /// @dev Will revert if a withdrawal amount is larger than available liquidity.
    function reallocateTo(address vault, Withdrawal[] calldata withdrawals, MarketParams calldata supplyMarketParams)
        external
        payable;

    /// @notice Sets the admin for a given vault.
    function setAdmin(address vault, address newAdmin) external;

    /// @notice Sets the fee for a given vault.
    function setFee(address vault, uint256 newFee) external;

    /// @notice Transfers the current balance to `feeRecipient` for a given vault.
    function transferFee(address vault, address payable feeRecipient) external;

    /// @notice Sets the maximum inflow and outflow through public allocation for some markets for a given vault.
    /// @dev Max allowed inflow/outflow is MAX_SETTABLE_FLOW_CAP.
    /// @dev Doesn't revert if it doesn't change the storage at all.
    function setFlowCaps(address vault, FlowCapsConfig[] calldata config) external;
}

/// @dev This interface is inherited by PublicAllocator so that function signatures are checked by the compiler.
/// @dev Consider using the IPublicAllocator interface instead of this one.
interface IPublicAllocatorStaticTyping is IPublicAllocatorBase {
    /// @notice Returns (maximum inflow, maximum outflow) through public allocation of a given market for a given vault.
    function flowCaps(address vault, Id) external view returns (uint128, uint128);
}

/// @title IPublicAllocator
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @dev Use this interface for PublicAllocator to have access to all the functions with the appropriate function
/// signatures.
interface IPublicAllocator is IPublicAllocatorBase {
    /// @notice Returns the maximum inflow and maximum outflow through public allocation of a given market for a given
    /// vault.
    function flowCaps(address vault, Id) external view returns (FlowCaps memory);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {Id, MarketParams} from "../interfaces/IMorpho.sol";

/// @title MarketParamsLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library to convert a market to its id.
library MarketParamsLib {
    /// @notice The length of the data used to compute the id of a market.
    /// @dev The length is 5 * 32 because `MarketParams` has 5 variables of 32 bytes each.
    uint256 internal constant MARKET_PARAMS_BYTES_LENGTH = 5 * 32;

    /// @notice Returns the id of the market `marketParams`.
    function id(MarketParams memory marketParams) internal pure returns (Id marketParamsId) {
        assembly ("memory-safe") {
            marketParamsId := keccak256(marketParams, MARKET_PARAMS_BYTES_LENGTH)
        }
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

uint256 constant WAD = 1e18;

/// @title MathLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library to manage fixed-point arithmetic.
library MathLib {
    /// @dev Returns (`x` * `y`) / `WAD` rounded down.
    function wMulDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, y, WAD);
    }

    /// @dev Returns (`x` * `WAD`) / `y` rounded down.
    function wDivDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, WAD, y);
    }

    /// @dev Returns (`x` * `WAD`) / `y` rounded up.
    function wDivUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, WAD, y);
    }

    /// @dev Returns (`x` * `y`) / `d` rounded down.
    function mulDivDown(uint256 x, uint256 y, uint256 d) internal pure returns (uint256) {
        return (x * y) / d;
    }

    /// @dev Returns (`x` * `y`) / `d` rounded up.
    function mulDivUp(uint256 x, uint256 y, uint256 d) internal pure returns (uint256) {
        return (x * y + (d - 1)) / d;
    }

    /// @dev Returns the sum of the first three non-zero terms of a Taylor expansion of e^(nx) - 1, to approximate a
    /// continuous compound interest rate.
    function wTaylorCompounded(uint256 x, uint256 n) internal pure returns (uint256) {
        uint256 firstTerm = x * n;
        uint256 secondTerm = mulDivDown(firstTerm, firstTerm, 2 * WAD);
        uint256 thirdTerm = mulDivDown(secondTerm, firstTerm, 3 * WAD);

        return firstTerm + secondTerm + thirdTerm;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {Id, MarketParams, Market, IMorpho} from "../../interfaces/IMorpho.sol";
import {IIrm} from "../../interfaces/IIrm.sol";

import {MathLib} from "../MathLib.sol";
import {UtilsLib} from "../UtilsLib.sol";
import {MorphoLib} from "./MorphoLib.sol";
import {SharesMathLib} from "../SharesMathLib.sol";
import {MarketParamsLib} from "../MarketParamsLib.sol";

/// @title MorphoBalancesLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Helper library exposing getters with the expected value after interest accrual.
/// @dev This library is not used in Morpho itself and is intended to be used by integrators.
/// @dev The getter to retrieve the expected total borrow shares is not exposed because interest accrual does not apply
/// to it. The value can be queried directly on Morpho using `totalBorrowShares`.
library MorphoBalancesLib {
    using MathLib for uint256;
    using MathLib for uint128;
    using UtilsLib for uint256;
    using MorphoLib for IMorpho;
    using SharesMathLib for uint256;
    using MarketParamsLib for MarketParams;

    /// @notice Returns the expected market balances of a market after having accrued interest.
    /// @return The expected total supply assets.
    /// @return The expected total supply shares.
    /// @return The expected total borrow assets.
    /// @return The expected total borrow shares.
    function expectedMarketBalances(IMorpho morpho, MarketParams memory marketParams)
        internal
        view
        returns (uint256, uint256, uint256, uint256)
    {
        Id id = marketParams.id();
        Market memory market = morpho.market(id);

        uint256 elapsed = block.timestamp - market.lastUpdate;

        // Skipped if elapsed == 0 or totalBorrowAssets == 0 because interest would be null, or if irm == address(0).
        if (elapsed != 0 && market.totalBorrowAssets != 0 && marketParams.irm != address(0)) {
            uint256 borrowRate = IIrm(marketParams.irm).borrowRateView(marketParams, market);
            uint256 interest = market.totalBorrowAssets.wMulDown(borrowRate.wTaylorCompounded(elapsed));
            market.totalBorrowAssets += interest.toUint128();
            market.totalSupplyAssets += interest.toUint128();

            if (market.fee != 0) {
                uint256 feeAmount = interest.wMulDown(market.fee);
                // The fee amount is subtracted from the total supply in this calculation to compensate for the fact
                // that total supply is already updated.
                uint256 feeShares =
                    feeAmount.toSharesDown(market.totalSupplyAssets - feeAmount, market.totalSupplyShares);
                market.totalSupplyShares += feeShares.toUint128();
            }
        }

        return (market.totalSupplyAssets, market.totalSupplyShares, market.totalBorrowAssets, market.totalBorrowShares);
    }

    /// @notice Returns the expected total supply assets of a market after having accrued interest.
    function expectedTotalSupplyAssets(IMorpho morpho, MarketParams memory marketParams)
        internal
        view
        returns (uint256 totalSupplyAssets)
    {
        (totalSupplyAssets,,,) = expectedMarketBalances(morpho, marketParams);
    }

    /// @notice Returns the expected total borrow assets of a market after having accrued interest.
    function expectedTotalBorrowAssets(IMorpho morpho, MarketParams memory marketParams)
        internal
        view
        returns (uint256 totalBorrowAssets)
    {
        (,, totalBorrowAssets,) = expectedMarketBalances(morpho, marketParams);
    }

    /// @notice Returns the expected total supply shares of a market after having accrued interest.
    function expectedTotalSupplyShares(IMorpho morpho, MarketParams memory marketParams)
        internal
        view
        returns (uint256 totalSupplyShares)
    {
        (, totalSupplyShares,,) = expectedMarketBalances(morpho, marketParams);
    }

    /// @notice Returns the expected supply assets balance of `user` on a market after having accrued interest.
    /// @dev Warning: Wrong for `feeRecipient` because their supply shares increase is not taken into account.
    /// @dev Warning: Withdrawing using the expected supply assets can lead to a revert due to conversion roundings from
    /// assets to shares.
    function expectedSupplyAssets(IMorpho morpho, MarketParams memory marketParams, address user)
        internal
        view
        returns (uint256)
    {
        Id id = marketParams.id();
        uint256 supplyShares = morpho.supplyShares(id, user);
        (uint256 totalSupplyAssets, uint256 totalSupplyShares,,) = expectedMarketBalances(morpho, marketParams);

        return supplyShares.toAssetsDown(totalSupplyAssets, totalSupplyShares);
    }

    /// @notice Returns the expected borrow assets balance of `user` on a market after having accrued interest.
    /// @dev Warning: The expected balance is rounded up, so it may be greater than the market's expected total borrow
    /// assets.
    function expectedBorrowAssets(IMorpho morpho, MarketParams memory marketParams, address user)
        internal
        view
        returns (uint256)
    {
        Id id = marketParams.id();
        uint256 borrowShares = morpho.borrowShares(id, user);
        (,, uint256 totalBorrowAssets, uint256 totalBorrowShares) = expectedMarketBalances(morpho, marketParams);

        return borrowShares.toAssetsUp(totalBorrowAssets, totalBorrowShares);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {IMorpho, Id} from "../../interfaces/IMorpho.sol";
import {MorphoStorageLib} from "./MorphoStorageLib.sol";

/// @title MorphoLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Helper library to access Morpho storage variables.
/// @dev Warning: Supply and borrow getters may return outdated values that do not include accrued interest.
library MorphoLib {
    function supplyShares(IMorpho morpho, Id id, address user) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.positionSupplySharesSlot(id, user));
        return uint256(morpho.extSloads(slot)[0]);
    }

    function borrowShares(IMorpho morpho, Id id, address user) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.positionBorrowSharesAndCollateralSlot(id, user));
        return uint128(uint256(morpho.extSloads(slot)[0]));
    }

    function collateral(IMorpho morpho, Id id, address user) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.positionBorrowSharesAndCollateralSlot(id, user));
        return uint256(morpho.extSloads(slot)[0] >> 128);
    }

    function totalSupplyAssets(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketTotalSupplyAssetsAndSharesSlot(id));
        return uint128(uint256(morpho.extSloads(slot)[0]));
    }

    function totalSupplyShares(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketTotalSupplyAssetsAndSharesSlot(id));
        return uint256(morpho.extSloads(slot)[0] >> 128);
    }

    function totalBorrowAssets(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketTotalBorrowAssetsAndSharesSlot(id));
        return uint128(uint256(morpho.extSloads(slot)[0]));
    }

    function totalBorrowShares(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketTotalBorrowAssetsAndSharesSlot(id));
        return uint256(morpho.extSloads(slot)[0] >> 128);
    }

    function lastUpdate(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketLastUpdateAndFeeSlot(id));
        return uint128(uint256(morpho.extSloads(slot)[0]));
    }

    function fee(IMorpho morpho, Id id) internal view returns (uint256) {
        bytes32[] memory slot = _array(MorphoStorageLib.marketLastUpdateAndFeeSlot(id));
        return uint256(morpho.extSloads(slot)[0] >> 128);
    }

    function _array(bytes32 x) private pure returns (bytes32[] memory) {
        bytes32[] memory res = new bytes32[](1);
        res[0] = x;
        return res;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {Id} from "../../interfaces/IMorpho.sol";

/// @title MorphoStorageLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Helper library exposing getters to access Morpho storage variables' slot.
/// @dev This library is not used in Morpho itself and is intended to be used by integrators.
library MorphoStorageLib {
    /* SLOTS */

    uint256 internal constant OWNER_SLOT = 0;
    uint256 internal constant FEE_RECIPIENT_SLOT = 1;
    uint256 internal constant POSITION_SLOT = 2;
    uint256 internal constant MARKET_SLOT = 3;
    uint256 internal constant IS_IRM_ENABLED_SLOT = 4;
    uint256 internal constant IS_LLTV_ENABLED_SLOT = 5;
    uint256 internal constant IS_AUTHORIZED_SLOT = 6;
    uint256 internal constant NONCE_SLOT = 7;
    uint256 internal constant ID_TO_MARKET_PARAMS_SLOT = 8;

    /* SLOT OFFSETS */

    uint256 internal constant LOAN_TOKEN_OFFSET = 0;
    uint256 internal constant COLLATERAL_TOKEN_OFFSET = 1;
    uint256 internal constant ORACLE_OFFSET = 2;
    uint256 internal constant IRM_OFFSET = 3;
    uint256 internal constant LLTV_OFFSET = 4;

    uint256 internal constant SUPPLY_SHARES_OFFSET = 0;
    uint256 internal constant BORROW_SHARES_AND_COLLATERAL_OFFSET = 1;

    uint256 internal constant TOTAL_SUPPLY_ASSETS_AND_SHARES_OFFSET = 0;
    uint256 internal constant TOTAL_BORROW_ASSETS_AND_SHARES_OFFSET = 1;
    uint256 internal constant LAST_UPDATE_AND_FEE_OFFSET = 2;

    /* GETTERS */

    function ownerSlot() internal pure returns (bytes32) {
        return bytes32(OWNER_SLOT);
    }

    function feeRecipientSlot() internal pure returns (bytes32) {
        return bytes32(FEE_RECIPIENT_SLOT);
    }

    function positionSupplySharesSlot(Id id, address user) internal pure returns (bytes32) {
        return bytes32(
            uint256(keccak256(abi.encode(user, keccak256(abi.encode(id, POSITION_SLOT))))) + SUPPLY_SHARES_OFFSET
        );
    }

    function positionBorrowSharesAndCollateralSlot(Id id, address user) internal pure returns (bytes32) {
        return bytes32(
            uint256(keccak256(abi.encode(user, keccak256(abi.encode(id, POSITION_SLOT)))))
                + BORROW_SHARES_AND_COLLATERAL_OFFSET
        );
    }

    function marketTotalSupplyAssetsAndSharesSlot(Id id) internal pure returns (bytes32) {
        return bytes32(uint256(keccak256(abi.encode(id, MARKET_SLOT))) + TOTAL_SUPPLY_ASSETS_AND_SHARES_OFFSET);
    }

    function marketTotalBorrowAssetsAndSharesSlot(Id id) internal pure returns (bytes32) {
        return bytes32(uint256(keccak256(abi.encode(id, MARKET_SLOT))) + TOTAL_BORROW_ASSETS_AND_SHARES_OFFSET);
    }

    function marketLastUpdateAndFeeSlot(Id id) internal pure returns (bytes32) {
        return bytes32(uint256(keccak256(abi.encode(id, MARKET_SLOT))) + LAST_UPDATE_AND_FEE_OFFSET);
    }

    function isIrmEnabledSlot(address irm) internal pure returns (bytes32) {
        return keccak256(abi.encode(irm, IS_IRM_ENABLED_SLOT));
    }

    function isLltvEnabledSlot(uint256 lltv) internal pure returns (bytes32) {
        return keccak256(abi.encode(lltv, IS_LLTV_ENABLED_SLOT));
    }

    function isAuthorizedSlot(address authorizer, address authorizee) internal pure returns (bytes32) {
        return keccak256(abi.encode(authorizee, keccak256(abi.encode(authorizer, IS_AUTHORIZED_SLOT))));
    }

    function nonceSlot(address authorizer) internal pure returns (bytes32) {
        return keccak256(abi.encode(authorizer, NONCE_SLOT));
    }

    function idToLoanTokenSlot(Id id) internal pure returns (bytes32) {
        return bytes32(uint256(keccak256(abi.encode(id, ID_TO_MARKET_PARAMS_SLOT))) + LOAN_TOKEN_OFFSET);
    }

    function idToCollateralTokenSlot(Id id) internal pure returns (bytes32) {
        return bytes32(uint256(keccak256(abi.encode(id, ID_TO_MARKET_PARAMS_SLOT))) + COLLATERAL_TOKEN_OFFSET);
    }

    function idToOracleSlot(Id id) internal pure returns (bytes32) {
        return bytes32(uint256(keccak256(abi.encode(id, ID_TO_MARKET_PARAMS_SLOT))) + ORACLE_OFFSET);
    }

    function idToIrmSlot(Id id) internal pure returns (bytes32) {
        return bytes32(uint256(keccak256(abi.encode(id, ID_TO_MARKET_PARAMS_SLOT))) + IRM_OFFSET);
    }

    function idToLltvSlot(Id id) internal pure returns (bytes32) {
        return bytes32(uint256(keccak256(abi.encode(id, ID_TO_MARKET_PARAMS_SLOT))) + LLTV_OFFSET);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

struct MarketConfig {
    /// @notice The maximum amount of assets that can be allocated to the market.
    uint184 cap;
    /// @notice Whether the market is in the withdraw queue.
    bool enabled;
    /// @notice The timestamp at which the market can be instantly removed from the withdraw queue.
    uint64 removableAt;
}

struct PendingUint192 {
    /// @notice The pending value to set.
    uint192 value;
    /// @notice The timestamp at which the pending value becomes valid.
    uint64 validAt;
}

struct PendingAddress {
    /// @notice The pending value to set.
    address value;
    /// @notice The timestamp at which the pending value becomes valid.
    uint64 validAt;
}

/// @title PendingLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library to manage pending values and their validity timestamp.
library PendingLib {
    /// @dev Updates `pending`'s value to `newValue` and its corresponding `validAt` timestamp.
    /// @dev Assumes `timelock` <= `MAX_TIMELOCK`.
    function update(PendingUint192 storage pending, uint184 newValue, uint256 timelock) internal {
        pending.value = newValue;
        // Safe "unchecked" cast because timelock <= MAX_TIMELOCK.
        pending.validAt = uint64(block.timestamp + timelock);
    }

    /// @dev Updates `pending`'s value to `newValue` and its corresponding `validAt` timestamp.
    /// @dev Assumes `timelock` <= `MAX_TIMELOCK`.
    function update(PendingAddress storage pending, address newValue, uint256 timelock) internal {
        pending.value = newValue;
        // Safe "unchecked" cast because timelock <= MAX_TIMELOCK.
        pending.validAt = uint64(block.timestamp + timelock);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity 0.8.24;

import {
    FlowCaps,
    FlowCapsConfig,
    Withdrawal,
    MAX_SETTABLE_FLOW_CAP,
    IPublicAllocatorStaticTyping,
    IPublicAllocatorBase
} from "./interfaces/IPublicAllocator.sol";
import {
    Id, IMorpho, IMetaMorpho, MarketAllocation, MarketParams
} from "../lib/metamorpho/src/interfaces/IMetaMorpho.sol";
import {Market} from "../lib/metamorpho/lib/morpho-blue/src/interfaces/IMorpho.sol";

import {ErrorsLib} from "./libraries/ErrorsLib.sol";
import {EventsLib} from "./libraries/EventsLib.sol";
import {UtilsLib} from "../lib/metamorpho/lib/morpho-blue/src/libraries/UtilsLib.sol";
import {MarketParamsLib} from "../lib/metamorpho/lib/morpho-blue/src/libraries/MarketParamsLib.sol";
import {MorphoBalancesLib} from "../lib/metamorpho/lib/morpho-blue/src/libraries/periphery/MorphoBalancesLib.sol";

/// @title PublicAllocator
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Publicly callable allocator for MetaMorpho vaults.
contract PublicAllocator is IPublicAllocatorStaticTyping {
    using MorphoBalancesLib for IMorpho;
    using MarketParamsLib for MarketParams;
    using UtilsLib for uint256;

    /* CONSTANTS */

    /// @inheritdoc IPublicAllocatorBase
    IMorpho public immutable MORPHO;

    /* STORAGE */

    /// @inheritdoc IPublicAllocatorBase
    mapping(address => address) public admin;
    /// @inheritdoc IPublicAllocatorBase
    mapping(address => uint256) public fee;
    /// @inheritdoc IPublicAllocatorBase
    mapping(address => uint256) public accruedFee;
    /// @inheritdoc IPublicAllocatorStaticTyping
    mapping(address => mapping(Id => FlowCaps)) public flowCaps;

    /* MODIFIER */

    /// @dev Reverts if the caller is not the admin nor the owner of this vault.
    modifier onlyAdminOrVaultOwner(address vault) {
        if (msg.sender != admin[vault] && msg.sender != IMetaMorpho(vault).owner()) {
            revert ErrorsLib.NotAdminNorVaultOwner();
        }
        _;
    }

    /* CONSTRUCTOR */

    /// @dev Initializes the contract.
    constructor(address morpho) {
        MORPHO = IMorpho(morpho);
    }

    /* ADMIN OR VAULT OWNER ONLY */

    /// @inheritdoc IPublicAllocatorBase
    function setAdmin(address vault, address newAdmin) external onlyAdminOrVaultOwner(vault) {
        if (admin[vault] == newAdmin) revert ErrorsLib.AlreadySet();
        admin[vault] = newAdmin;
        emit EventsLib.SetAdmin(msg.sender, vault, newAdmin);
    }

    /// @inheritdoc IPublicAllocatorBase
    function setFee(address vault, uint256 newFee) external onlyAdminOrVaultOwner(vault) {
        if (fee[vault] == newFee) revert ErrorsLib.AlreadySet();
        fee[vault] = newFee;
        emit EventsLib.SetFee(msg.sender, vault, newFee);
    }

    /// @inheritdoc IPublicAllocatorBase
    function setFlowCaps(address vault, FlowCapsConfig[] calldata config) external onlyAdminOrVaultOwner(vault) {
        for (uint256 i = 0; i < config.length; i++) {
            Id id = config[i].id;
            if (!IMetaMorpho(vault).config(id).enabled && (config[i].caps.maxIn > 0 || config[i].caps.maxOut > 0)) {
                revert ErrorsLib.MarketNotEnabled(id);
            }
            if (config[i].caps.maxIn > MAX_SETTABLE_FLOW_CAP || config[i].caps.maxOut > MAX_SETTABLE_FLOW_CAP) {
                revert ErrorsLib.MaxSettableFlowCapExceeded();
            }
            flowCaps[vault][id] = config[i].caps;
        }

        emit EventsLib.SetFlowCaps(msg.sender, vault, config);
    }

    /// @inheritdoc IPublicAllocatorBase
    function transferFee(address vault, address payable feeRecipient) external onlyAdminOrVaultOwner(vault) {
        uint256 claimed = accruedFee[vault];
        accruedFee[vault] = 0;
        feeRecipient.transfer(claimed);
        emit EventsLib.TransferFee(msg.sender, vault, claimed, feeRecipient);
    }

    /* PUBLIC */

    /// @inheritdoc IPublicAllocatorBase
    function reallocateTo(address vault, Withdrawal[] calldata withdrawals, MarketParams calldata supplyMarketParams)
        external
        payable
    {
        if (msg.value != fee[vault]) revert ErrorsLib.IncorrectFee();
        if (msg.value > 0) accruedFee[vault] += msg.value;

        if (withdrawals.length == 0) revert ErrorsLib.EmptyWithdrawals();

        Id supplyMarketId = supplyMarketParams.id();
        if (!IMetaMorpho(vault).config(supplyMarketId).enabled) revert ErrorsLib.MarketNotEnabled(supplyMarketId);

        MarketAllocation[] memory allocations = new MarketAllocation[](withdrawals.length + 1);
        uint128 totalWithdrawn;

        Id id;
        Id prevId;
        for (uint256 i = 0; i < withdrawals.length; i++) {
            prevId = id;
            id = withdrawals[i].marketParams.id();
            if (!IMetaMorpho(vault).config(id).enabled) revert ErrorsLib.MarketNotEnabled(id);
            uint128 withdrawnAssets = withdrawals[i].amount;
            if (withdrawnAssets == 0) revert ErrorsLib.WithdrawZero(id);

            if (Id.unwrap(id) <= Id.unwrap(prevId)) revert ErrorsLib.InconsistentWithdrawals();
            if (Id.unwrap(id) == Id.unwrap(supplyMarketId)) revert ErrorsLib.DepositMarketInWithdrawals();

            MORPHO.accrueInterest(withdrawals[i].marketParams);
            uint256 assets = MORPHO.expectedSupplyAssets(withdrawals[i].marketParams, address(vault));

            if (flowCaps[vault][id].maxOut < withdrawnAssets) revert ErrorsLib.MaxOutflowExceeded(id);
            if (assets < withdrawnAssets) revert ErrorsLib.NotEnoughSupply(id);

            flowCaps[vault][id].maxIn += withdrawnAssets;
            flowCaps[vault][id].maxOut -= withdrawnAssets;
            allocations[i].marketParams = withdrawals[i].marketParams;
            allocations[i].assets = assets - withdrawnAssets;

            totalWithdrawn += withdrawnAssets;

            emit EventsLib.PublicWithdrawal(msg.sender, vault, id, withdrawnAssets);
        }

        if (flowCaps[vault][supplyMarketId].maxIn < totalWithdrawn) revert ErrorsLib.MaxInflowExceeded(supplyMarketId);

        flowCaps[vault][supplyMarketId].maxIn -= totalWithdrawn;
        flowCaps[vault][supplyMarketId].maxOut += totalWithdrawn;
        allocations[withdrawals.length].marketParams = supplyMarketParams;
        allocations[withdrawals.length].assets = type(uint256).max;

        IMetaMorpho(vault).reallocate(allocations);

        emit EventsLib.PublicReallocateTo(msg.sender, vault, supplyMarketId, totalWithdrawn);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {MathLib} from "./MathLib.sol";

/// @title SharesMathLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Shares management library.
/// @dev This implementation mitigates share price manipulations, using OpenZeppelin's method of virtual shares:
/// https://docs.openzeppelin.com/contracts/4.x/erc4626#inflation-attack.
library SharesMathLib {
    using MathLib for uint256;

    /// @dev The number of virtual shares has been chosen low enough to prevent overflows, and high enough to ensure
    /// high precision computations.
    /// @dev Virtual shares can never be redeemed for the assets they are entitled to, but it is assumed the share price
    /// stays low enough not to inflate these assets to a significant value.
    /// @dev Warning: The assets to which virtual borrow shares are entitled behave like unrealizable bad debt.
    uint256 internal constant VIRTUAL_SHARES = 1e6;

    /// @dev A number of virtual assets of 1 enforces a conversion rate between shares and assets when a market is
    /// empty.
    uint256 internal constant VIRTUAL_ASSETS = 1;

    /// @dev Calculates the value of `assets` quoted in shares, rounding down.
    function toSharesDown(uint256 assets, uint256 totalAssets, uint256 totalShares) internal pure returns (uint256) {
        return assets.mulDivDown(totalShares + VIRTUAL_SHARES, totalAssets + VIRTUAL_ASSETS);
    }

    /// @dev Calculates the value of `shares` quoted in assets, rounding down.
    function toAssetsDown(uint256 shares, uint256 totalAssets, uint256 totalShares) internal pure returns (uint256) {
        return shares.mulDivDown(totalAssets + VIRTUAL_ASSETS, totalShares + VIRTUAL_SHARES);
    }

    /// @dev Calculates the value of `assets` quoted in shares, rounding up.
    function toSharesUp(uint256 assets, uint256 totalAssets, uint256 totalShares) internal pure returns (uint256) {
        return assets.mulDivUp(totalShares + VIRTUAL_SHARES, totalAssets + VIRTUAL_ASSETS);
    }

    /// @dev Calculates the value of `shares` quoted in assets, rounding up.
    function toAssetsUp(uint256 shares, uint256 totalAssets, uint256 totalShares) internal pure returns (uint256) {
        return shares.mulDivUp(totalAssets + VIRTUAL_ASSETS, totalShares + VIRTUAL_SHARES);
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;

import {ErrorsLib} from "../libraries/ErrorsLib.sol";

/// @title UtilsLib
/// @author Morpho Labs
/// @custom:contact security@morpho.org
/// @notice Library exposing helpers.
/// @dev Inspired by https://github.com/morpho-org/morpho-utils.
library UtilsLib {
    /// @dev Returns true if there is exactly one zero among `x` and `y`.
    function exactlyOneZero(uint256 x, uint256 y) internal pure returns (bool z) {
        assembly {
            z := xor(iszero(x), iszero(y))
        }
    }

    /// @dev Returns the min of `x` and `y`.
    function min(uint256 x, uint256 y) internal pure returns (uint256 z) {
        assembly {
            z := xor(x, mul(xor(x, y), lt(y, x)))
        }
    }

    /// @dev Returns `x` safely cast to uint128.
    function toUint128(uint256 x) internal pure returns (uint128) {
        require(x <= type(uint128).max, ErrorsLib.MAX_UINT128_EXCEEDED);
        return uint128(x);
    }

    /// @dev Returns max(0, x - y).
    function zeroFloorSub(uint256 x, uint256 y) internal pure returns (uint256 z) {
        assembly {
            z := mul(gt(x, y), sub(x, y))
        }
    }
}

{
  "compilationTarget": {
    "src/PublicAllocator.sol": "PublicAllocator"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "remappings": [
    ":@openzeppelin/contracts/=lib/metamorpho/lib/openzeppelin-contracts/contracts/",
    ":ds-test/=lib/metamorpho/lib/forge-std/lib/ds-test/src/",
    ":erc4626-tests/=lib/metamorpho/lib/erc4626-tests/",
    ":forge-std/=lib/metamorpho/lib/forge-std/src/",
    ":metamorpho/=lib/metamorpho/",
    ":morpho-blue-irm/=lib/metamorpho/lib/morpho-blue-irm/src/",
    ":morpho-blue/=lib/metamorpho/lib/morpho-blue/",
    ":openzeppelin-contracts/=lib/metamorpho/lib/openzeppelin-contracts/",
    ":solmate/=lib/metamorpho/lib/morpho-blue-irm/lib/solmate/src/"
  ],
  "viaIR": true
}