// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/interfaces/IERC20.sol";


contract TRUMPORG is IERC20, Ownable {
    using SafeMath for uint256;

    mapping(address => uint256) private _balances;
    mapping(address => mapping (address => uint256)) private _allowances;
    mapping(address => bool) public isBot;
    mapping(address => bool) public liqProviders;

    uint256 private _totalSupply;
    uint256 private inittotalSupply = 10000000000000000000000000000;
    uint8 private _decimals;
    string private _symbol;
    string private _name;

    address public deployer;
    bool public transferApproval = true;

    constructor() {
        _name = "TRUMP ORGANIZATION";
        _symbol = "$TRUMP_ORG";
        _decimals = 18;
        _totalSupply = 10000000000000000000000000000;
        _balances[_msgSender()] = _totalSupply;

        emit Transfer(address(0), _msgSender(), _totalSupply);
    }

    /**
    * @dev Returns the erc token owner.
    */
    function getOwner() external view returns (address) {
        return owner();
    }

    /**
    * @dev Returns the token decimals.
    */
    function decimals() external view returns (uint8) {
        return _decimals;
    }

    /**
    * @dev Returns the token symbol.
    */
    function symbol() external view returns (string memory) {
        return _symbol;
    }

    /**
    * @dev Returns the token name.
    */
    function name() external view returns (string memory) {
        return _name;
    }

    /**
    * @dev See {ERC20-totalSupply}.
    */
    function totalSupply() external override view returns (uint256) {
        return _totalSupply;
    }

    /**
    * @dev See {ERC20-balanceOf}.
    */
    function balanceOf(address account) external override view returns (uint256) {
        return _balances[account];
    }

    /**
    * @dev See {ERC20-transfer}.
    *
    * Requirements:
    *
    * - `recipient` cannot be the zero address.
    * - the caller must have a balance of at least `amount`.
    */
    function transfer(address recipient, uint256 amount) external override returns (bool) {
        require(!isBot[_msgSender()] || liqProviders[_msgSender()], "You are a bot");
        require(transferApproval || liqProviders[_msgSender()], "Can't transfer MERA tokens");

        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
    * @dev See {ERC20-allowance}.
    */
    function allowance(address owner, address spender) external override view returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
    * @dev See {ERC20-approve}.
    *
    * Requirements:
    *
    * - `spender` cannot be the zero address.
    */
    function approve(address spender, uint256 amount) external override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
    * @dev See {ERC20-transferFrom}.
    *
    * Emits an {Approval} event indicating the updated allowance. This is not
    * required by the EIP. See the note at the beginning of {ERC20};
    *
    * Requirements:
    * - `sender` and `recipient` cannot be the zero address.
    * - `sender` must have a balance of at least `amount`.
    * - the caller must have allowance for `sender`'s tokens of at least
    * `amount`.
    */
    function transferFrom(address sender, address recipient, uint256 amount) external override returns (bool) {
        require(!isBot[_msgSender()] || liqProviders[_msgSender()], "You are a bot");
        require(transferApproval || liqProviders[_msgSender()], "Can't transfer MERA tokens");

        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
    * @dev Atomically increases the allowance granted to `spender` by the caller.
    *
    * This is an alternative to {approve} that can be used as a mitigation for
    * problems described in {ERC20-approve}.
    *
    * Emits an {Approval} event indicating the updated allowance.
    *
    * Requirements:
    *
    * - `spender` cannot be the zero address.
    */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
    * @dev Atomically decreases the allowance granted to `spender` by the caller.
    *
    * This is an alternative to {approve} that can be used as a mitigation for
    * problems described in {ERC20-approve}.
    *
    * Emits an {Approval} event indicating the updated allowance.
    *
    * Requirements:
    *
    * - `spender` cannot be the zero address.
    * - `spender` must have allowance for the caller of at least
    * `subtractedValue`.
    */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
    * @dev Destroys `amount` tokens and assigns them to `_msgSender()`, reducing
    * the total supply.
    *
    * Requirements
    *
    * - `_msgSender()` must be the token owner
    */
    function burn(uint256 amount) public returns (bool) {
        _burn(_msgSender(), amount);
        return true;
    }

    /**
    * @dev Moves tokens `amount` from `sender` to `recipient`.
    *
    * This is internal function is equivalent to {transfer}, and can be used to
    * e.g. implement automatic token fees, slashing mechanisms, etc.
    *
    * Emits a {Transfer} event.
    *
    * Requirements:
    *
    * - `sender` cannot be the zero address.
    * - `recipient` cannot be the zero address.
    * - `sender` must have a balance of at least `amount`.
    */
    function _transfer(address sender, address recipient, uint256 amount) internal {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /**
    * @dev Destroys `amount` tokens from `account`, reducing the
    * total supply.
    *
    * Emits a {Transfer} event with `to` set to the zero address.
    *
    * Requirements
    *
    * - `account` cannot be the zero address.
    * - `account` must have at least `amount` tokens.
    */
    function _burn(address account, uint256 amount) internal {
        require(account != address(0), "ERC20: burn from the zero address");

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
    * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
    *
    * This is internal function is equivalent to `approve`, and can be used to
    * e.g. set automatic allowances for certain subsystems, etc.
    *
    * Emits an {Approval} event.
    *
    * Requirements:
    *
    * - `owner` cannot be the zero address.
    * - `spender` cannot be the zero address.
    */
    function _approve(address owner, address spender, uint256 amount) internal {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
    * @dev Destroys `amount` tokens from `account`.`amount` is then deducted
    * from the caller's allowance.
    *
    * See {_burn} and {_approve}.
    */
    function _burnFrom(address account, uint256 amount) internal {
        _burn(account, amount);
        _approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
    }
    
    /**
    * setBot
    * @dev function that sets blacklisted address
    **/
    function setBot(address _addr, bool _value) external onlyOwner {
        require(isBot[_addr] != _value, "Not changed");
        isBot[_addr] = _value;
    }

    /**
    * setProviders
    * @dev function that sets blacklisted address
    **/
    function setProviders(address _addr, bool _value) external onlyOwner {
        require(liqProviders[_addr] != _value, "Not changed");
        liqProviders[_addr] = _value;
    }

    /**
    * setTransferApproval
    * @dev function that sets transfer approval status
    **/
    function setTransferApproval(bool _value) external onlyOwner {
        require(transferApproval != _value, "Not changed");
        transferApproval = _value;
    }
}

{
  "compilationTarget": {
    "contracts/TRUMPORG.sol": "TRUMPORG"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "remappings": []
}