// File: @openzeppelin/contracts/utils/math/SignedMath.sol


// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// File: @openzeppelin/contracts/utils/math/Math.sol


// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// File: @openzeppelin/contracts/utils/Strings.sol


// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;



/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// File: @openzeppelin/contracts/utils/cryptography/ECDSA.sol


// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)

pragma solidity ^0.8.0;


/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV // Deprecated in v4.8
    }

    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }

    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {
        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
        uint8 v = uint8((uint256(vs) >> 255) + 27);
        return tryRecover(hash, v, r, s);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }

        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }

        return (signer, RecoverError.NoError);
    }

    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\x19Ethereum Signed Message:\n32")
            mstore(0x1c, hash)
            message := keccak256(0x00, 0x3c)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Message, created from `s`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
    }

    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\x19\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            data := keccak256(ptr, 0x42)
        }
    }

    /**
     * @dev Returns an Ethereum Signed Data with intended validator, created from a
     * `validator` and `data` according to the version 0 of EIP-191.
     *
     * See {recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\x19\x00", validator, data));
    }
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol


// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: @openzeppelin/contracts/utils/Address.sol


// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// File: @openzeppelin/contracts/utils/introspection/IERC165.sol


// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File: @openzeppelin/contracts/utils/introspection/ERC165.sol


// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;


/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// File: @openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol


// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;


/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// File: @openzeppelin/contracts/token/ERC1155/IERC1155.sol


// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;


/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(
        address[] calldata accounts,
        uint256[] calldata ids
    ) external view returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(address from, address to, uint256 id, uint256 amount, bytes calldata data) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// File: @openzeppelin/contracts/token/ERC1155/extensions/IERC1155MetadataURI.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.0;


/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

// File: @openzeppelin/contracts/token/ERC1155/ERC1155.sol


// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.0;







/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: address zero is not a valid owner");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(
        address[] memory accounts,
        uint256[] memory ids
    ) public view virtual override returns (uint256[] memory) {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(address to, uint256 id, uint256 amount, bytes memory data) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(address from, uint256 id, uint256 amount) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }

        emit TransferSingle(operator, from, address(0), id, amount);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(address from, uint256[] memory ids, uint256[] memory amounts) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }

        emit TransferBatch(operator, from, address(0), ids, amounts);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `ids` and `amounts` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}

// File: @openzeppelin/contracts/token/ERC1155/extensions/ERC1155Supply.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/extensions/ERC1155Supply.sol)

pragma solidity ^0.8.0;


/**
 * @dev Extension of ERC1155 that adds tracking of total supply per id.
 *
 * Useful for scenarios where Fungible and Non-fungible tokens have to be
 * clearly identified. Note: While a totalSupply of 1 might mean the
 * corresponding is an NFT, there is no guarantees that no other token with the
 * same id are not going to be minted.
 */
abstract contract ERC1155Supply is ERC1155 {
    mapping(uint256 => uint256) private _totalSupply;

    /**
     * @dev Total amount of tokens in with a given id.
     */
    function totalSupply(uint256 id) public view virtual returns (uint256) {
        return _totalSupply[id];
    }

    /**
     * @dev Indicates whether any token exist with a given id, or not.
     */
    function exists(uint256 id) public view virtual returns (bool) {
        return ERC1155Supply.totalSupply(id) > 0;
    }

    /**
     * @dev See {ERC1155-_beforeTokenTransfer}.
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual override {
        super._beforeTokenTransfer(operator, from, to, ids, amounts, data);

        if (from == address(0)) {
            for (uint256 i = 0; i < ids.length; ++i) {
                _totalSupply[ids[i]] += amounts[i];
            }
        }

        if (to == address(0)) {
            for (uint256 i = 0; i < ids.length; ++i) {
                uint256 id = ids[i];
                uint256 amount = amounts[i];
                uint256 supply = _totalSupply[id];
                require(supply >= amount, "ERC1155: burn amount exceeds totalSupply");
                unchecked {
                    _totalSupply[id] = supply - amount;
                }
            }
        }
    }
}

// File: contracts/NftNowPodcast.sol


pragma solidity ^0.8.15;







contract NftNowPodcast is ERC1155, Ownable, ERC1155Supply {   
    using ECDSA for bytes32;
    using Strings for uint256;
    
    // Define struct for TokenInfo
    struct TokenInfo {
        bool exists;
        bool mintable;
        bool claimable;
        bool hasAllowlist;
        uint256 publicCost;
        uint256 maxAmount; 
        uint256 maxPerUser; 
        string metadataUrl; 
    }

    // Define struct for publication description
    struct Podcast {
        string season;
        string title;
        string guest;
        string description;
        uint timestamp;
    }
    
    Podcast[] public podcasts;

    //*****Variables 
    string public name;
    bool paused = true;
    address private _signerAddress;

    //*****MAPPINGS    
    // Mapping from token id to token info
    mapping(uint256 => TokenInfo) public tokenInfos; 
        
    //Mapping who has claimed 1 free per tokenId
    mapping(uint => mapping(address => bool)) public alreadyClaimed; 

    //Mapping for max mint per user
    mapping(uint => mapping(address => uint)) public addressMintedBalance;

    //*****EVENTS 
    // Define event for when a new podcast is created
    event PodcastCreated(uint podcastId, string title, string guest, uint timestamp);
    // Define event for when a new podcast is minted
    event PodcastMinted(uint podcastId, uint timestamp);
    // Define event for when a podcast is updated
    event PodcastUpdated(uint podcastId, uint timestamp, string metadataUrl);
    //Define event for airdropping tokens
    event PodcastAirdropped(uint podcastId, uint timestamp);


    constructor(string memory _name) ERC1155("NftNowPodcast")  payable {
        name = _name;
    }
    
    //*******************************************************************************************
    //*******************************************************************************************
    //*****Creator function
    
    // Function to create a new podcast
    function createPodcast(string memory _season, string memory _title, string memory _guest, string memory _description, uint256 _tokenId, uint _publicCost, uint _maxAmount, uint _maxPerUser, string memory _metadataUrl, uint _reserveAmount, address _reserveAddy) public onlyOwner {
        
        // Add new podcast to podcast array
        podcasts.push(Podcast(_season, _title, _guest, _description, block.timestamp));
        
        //Add tokenId to array for 1155s
        add(_tokenId, _publicCost, _maxAmount, _maxPerUser, _metadataUrl);
        
        //Optionally mint some to specified wallet
        if (_reserveAmount > 0) {
            _mint(_reserveAddy, _tokenId, _reserveAmount, "");
            
        }
        
        // Emit PodcastCreated event
        emit PodcastCreated(podcasts.length - 1, _title, _guest, block.timestamp);
    }

    //*******************************************************************************************
    //*******************************************************************************************
    //*****Distribution functions
 
    function mint(uint256 tokenId, uint256 amount) public payable {
        
        // Get token information for token id
        TokenInfo memory tokenInfo = tokenInfos[tokenId];
    
        // Get amount of already minted tokens for this tokenId
        uint256 minted = super.totalSupply(tokenId);

        //Require contract is not paused
        require(paused == false, "contract is currently paused");
        
        // Ensure token id exists 
        require(tokenInfo.exists, "Token with given id does not exists");

        // Ensure tokenId is mintable
        require(tokenInfo.mintable == true, "Token not mintable");

        // Ensure tokenId allowlist time elapsed
        require(tokenInfo.hasAllowlist == false, "Allowlist only"); 
        
        // Prevent minting more than allowed by the contract
        require((minted + amount) < tokenInfo.maxAmount + 1, "Too many tokens");
        
        //Max amount to mint per wallet
        require((balanceOf(msg.sender,tokenId) + amount) < tokenInfo.maxPerUser + 1 ,"Too many tokens per User");  
        
        //Number of already minted by user
        require(addressMintedBalance[tokenId][msg.sender] + amount < tokenInfo.maxPerUser + 1, "You have exceed maxMintAmount");

        //Require eth sent
        require(tokenInfos[tokenId].publicCost * amount <= msg.value, "Not Enough ETH sent");
        
        addressMintedBalance[tokenId][msg.sender] += amount;
        
        // Mint token
        _mint(msg.sender, tokenId, amount, "");
        
        // Emit PodcastMinted event
        emit PodcastMinted(tokenId, block.timestamp);
         
    }

    //Allowlist Mint
    function allowlistMint(uint256 tokenId, uint256 amount, bytes calldata signature) public payable {
        
        // Get token information for token id
        TokenInfo memory tokenInfo = tokenInfos[tokenId];

        // Get amount of already minted tokens for this tokenId
        uint256 minted = super.totalSupply(tokenId);

        //Require contract is not paused
        require(paused == false, "contract is currently paused");

        // Ensure tokenId is mintable
        require(tokenInfo.mintable == true, "Token not mintable");

        // Ensure tokenId has allowlist
        require(tokenInfo.hasAllowlist == true, "Token not allowed");
        
        // Require Token Exists
        require(tokenInfo.exists, "Token with given id does not exists");
        
        // Prevent minting more than allowed
        require((minted + amount) < tokenInfo.maxAmount + 1, "Too many tokens");
        
        //Max amount to mint per wallet
        require((balanceOf(msg.sender,tokenId) + amount) < tokenInfo.maxPerUser + 1 ,"Too many tokens per User");  

        //Number of already minted by user
        require(addressMintedBalance[tokenId][msg.sender] + amount < tokenInfo.maxPerUser + 1, "You have exceed maxMintAmount");

        //Verify ECDSA
        require(_signerAddress == keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", bytes32(uint256(uint160(msg.sender)))
            )
        ).recover(signature), "Signer address mismatch.");

        //Require eth sent
        require(tokenInfos[tokenId].publicCost * amount <= msg.value, "Not Enough ETH sent");

        addressMintedBalance[tokenId][msg.sender] += amount;
        
        // Mint token
        _mint(msg.sender,tokenId, amount, "");
        
        emit PodcastMinted(tokenId, block.timestamp);
    }


    //Allows user to claim 1 free tokenId based on ECDSA signature
    function claim(uint256 tokenId, bytes calldata signature) public payable {
        
        // Get token information for token id
        TokenInfo memory tokenInfo = tokenInfos[tokenId];

        // Get amount of already minted tokens for this tokenId
        uint256 minted = super.totalSupply(tokenId); 

        //Require contract is not paused
        require(paused == false, "Contract is currently paused");

        // Require Token Exists
        require(tokenInfo.exists, "Token with given id does not exists");

        //Require token is claimable
        require(tokenInfo.claimable == true, "Not claimable");
        
        // Prevent minting more than allowed
        require((minted + 1) < tokenInfo.maxAmount + 1, "Too many tokens");

        //Require 1 per user signature
        require(alreadyClaimed[tokenId][msg.sender] == false, "ONLY 1 PER FREE CLAIM");
        
        //Verify ECDSA
        require(_signerAddress == keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", bytes32(uint256(uint160(msg.sender)))
            )
        ).recover(signature), "Signer address mismatch.");

        alreadyClaimed[tokenId][msg.sender] = true;
        _mint(msg.sender,tokenId, 1, "");
         
        
        emit PodcastMinted(tokenId, block.timestamp);
    }

    function testBytesReturn() external view returns (bytes32) {
        return bytes32(uint256(uint160(msg.sender)));
    }

    function testSignerRecovery(bytes calldata signature) external view returns (address) {
        return keccak256(
            abi.encodePacked(
                "\x19Ethereum Signed Message:\n32",
                bytes32(uint256(uint160(msg.sender)))
            )
        ).recover(signature);
    }
 
    //Allows owner to airdrop token to multiple users
    //WARNING for onlyOwner: No checks performed. Use with caution.
    
    function bulkDrop(address[] calldata users, uint tokenId) external onlyOwner{
        for (uint256 i; i < users.length; i++) {
            _mint(users[i], tokenId, 1, ""); 
        }
        
        emit PodcastAirdropped(tokenId, block.timestamp);
    }

    //*******************************************************************************************
    //*******************************************************************************************
    //*****Data functions

    // Token level metadata 
    function uri(uint256 tokenId) public view override returns (string memory) {
        return tokenInfos[tokenId].metadataUrl;
    }
    
    // Function to get all podcasts
    function getAllPodcasts() public view returns (Podcast[] memory) {
        return podcasts;
    }
    
    // Function to get a podcast by ID
    function getPodcastById(uint _podcastId) public view returns (Podcast memory) {
        return podcasts[_podcastId];
    }
    
    //*******************************************************************************************
    //*******************************************************************************************
    //*****Internal functions

    function add(uint256 tokenId, uint256 publicCost, uint256 maxAmountAllowed, uint256 maxPerUser, string memory metadataUrl) internal {
        // Ensure we can only add and not override
        require(!tokenInfos[tokenId].exists, "Token with given id already exists"); 
        
        // Add token informations for token id
        tokenInfos[tokenId] = TokenInfo(true, false, false, false, publicCost, maxAmountAllowed, maxPerUser, metadataUrl); 
    }

    //*******************************************************************************************
    //*******************************************************************************************
    //*****OnlyOwner functions

    //withdraws all remaining funds from the smart contract
    //send ZERO value to when calling
    function withdraw() public payable onlyOwner {
        (bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
        require(success);
    }

    //Pause the entire contract
    function pause(bool _state) public onlyOwner(){
        paused = _state;
    }

    //Update signature required for ECDSA claims
    function newSigner(address _newSigner) public onlyOwner{
        _signerAddress = _newSigner;
    }

    // Update token metadataURI for token id to allow edits
    function editURI(uint tokenId, string memory _metadataUrl) public onlyOwner{
        require(tokenInfos[tokenId].exists, "Token with given id does not exist"); 
        tokenInfos[tokenId].metadataUrl = _metadataUrl;

        emit PodcastUpdated(tokenId, block.timestamp, _metadataUrl);
    }

    //Set mintable state for tokenId
    function setMintable(uint tokenId, bool _state) public onlyOwner{
        tokenInfos[tokenId].mintable = _state;
    }

    //Set claimable state for tokenId
    function setClaimable(uint tokenId, bool _state) public onlyOwner{
        tokenInfos[tokenId].claimable = _state;
    }

    //Set allowlist state for tokenId
    function setAllowlist(uint tokenId, bool _state) public onlyOwner{
        tokenInfos[tokenId].hasAllowlist = _state;
    }

    //Set paused state for contract
    function isPaused() public view returns(bool){
        return paused;
    }

    //*******************************************************************************************
    //*******************************************************************************************
    //*****Aux functions
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal override(ERC1155, ERC1155Supply) {
        super._beforeTokenTransfer(operator, from, to, ids, amounts, data);
    }
}

{
  "compilationTarget": {
    "NftNowPodcast.sol": "NftNowPodcast"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 1000
  },
  "remappings": []
}