// SPDX-License-Identifier: MIT

pragma solidity ^0.8.17;

library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, 'SafeMath: addition overflow');

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, 'SafeMath: subtraction overflow');
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, 'SafeMath: multiplication overflow');

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, 'SafeMath: division by zero');
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, 'SafeMath: modulo by zero');
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }

    function min(uint256 x, uint256 y) internal pure returns (uint256 z) {
        z = x < y ? x : y;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint256 y) internal pure returns (uint256 z) {
        if (y > 3) {
            z = y;
            uint256 x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}

interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the token decimals.
     */
    function decimals() external view returns (uint8);

    /**
     * @dev Returns the token symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the token name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external view returns (address);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address _owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            codehash := extcodehash(account)
        }
        return (codehash != accountHash && codehash != 0x0);
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, 'Address: insufficient balance');

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}('');
        require(success, 'Address: unable to send value, recipient may have reverted');
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, 'Address: low-level call failed');
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, 'Address: insufficient balance for call');
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(
        address target,
        bytes memory data,
        uint256 weiValue,
        string memory errorMessage
    ) private returns (bytes memory) {
        require(isContract(target), 'Address: call to non-contract');

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: weiValue}(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            'SafeERC20: approve from non-zero to non-zero allowance'
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(
            value,
            'SafeERC20: decreased allowance below zero'
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, 'SafeERC20: low-level call failed');
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), 'SafeERC20: ERC20 operation did not succeed');
        }
    }
}
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor (){
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

contract DickBenchIDO is ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // Info of each user.
    struct UserInfo {
        uint256 amount;   // How many tokens the user has provided.
        bool claimed;  // default false
    }

    uint256 public constant CALC_PRECISION = 10 ** 18;
    uint256 public constant  minAmount = 5e17;//0.5BENCH;
    uint256 public idoPrice;

    // admin address
    address public adminAddress;
    // The raising token(eg: Bench)
    IERC20 public raisingToken;
    // The offering token(eg:Dick)
    IERC20 public offeringToken;


    // The time when IDO starts
    uint256 public startTime;
    // The time when IDO ends
    uint256 public endTime;
    //The time calc duration when IDO ends;
    uint256 public calcDuration;


    // total amount of raising tokens need to be raised
    uint256 public raisingAmount;
    // total amount of offeringToken that will offer
    uint256 public offeringAmount;
    // total amount of raising tokens that have already raised
    uint256 public totalAmount;
    // address => amount
    mapping (address => UserInfo) public userInfo;
    // participators
    address[] public addressList;
    //address finalWithdraw
    address public finalWithAddr;

    event Deposit(address indexed user, uint256 amount);
    event Harvest(address indexed user, uint256 offeringAmount,uint256 excessAmount);

    constructor(
        IERC20 _raisingToken,
        IERC20 _offeringToken,
        address _finalWithAddr,
        uint256 _startTime,
        uint256 _endTime
    ) {
        raisingToken = _raisingToken;
        offeringToken = _offeringToken;
        startTime = _startTime;
        endTime  = _endTime;
        offeringAmount = 611_850_000 * (10**18);
        raisingAmount= 85_522 * (10**18);
        idoPrice = 307507395603000;
        adminAddress = msg.sender;
        finalWithAddr = _finalWithAddr;
        totalAmount = 0;
        calcDuration = 30*60;
    }

    modifier onlyAdmin() {
        require(msg.sender == adminAddress, "Not Addmin");
        _;
    }

    function setOfferingAmount(uint256 _offerAmount) public onlyAdmin {
        require (block.timestamp < startTime, 'Not allowed setOfferingAmount');
        offeringAmount = _offerAmount;
    }

    function setRaisingAmount(uint256 _raisingAmount) public onlyAdmin {
        require (block.timestamp < startTime, 'Not allowed setRaisingAmount');
        raisingAmount= _raisingAmount;
    }

    function setStartEndTime(uint256 _startTime,uint256 _endTime,uint256 _calcDuration) public onlyAdmin {
        require (block.timestamp < startTime, 'Not allowed setStartEndTime');
        startTime = _startTime;
        endTime = _endTime;
        calcDuration = _calcDuration;
    }


    function setFinalWithAddr(address _finalWithAddr) public onlyAdmin {
        finalWithAddr = _finalWithAddr;
    }

    function deposit(uint256 _amount) public {
        require (block.timestamp >= startTime && block.timestamp <= endTime, 'not IDO time');
        require (_amount >= minAmount, 'need amount > minAmount');
        raisingToken.safeTransferFrom(address(msg.sender), address(this), _amount);
        if (userInfo[msg.sender].amount == 0) {
            addressList.push(address(msg.sender));
        }
        userInfo[msg.sender].amount = userInfo[msg.sender].amount.add(_amount);
        totalAmount = totalAmount.add(_amount);
        emit Deposit(msg.sender, _amount);
    }

    function harvest() public nonReentrant {
        require (block.timestamp > endTime.add(calcDuration), 'not harvest time');
        require (userInfo[msg.sender].amount > 0, 'have you participated?');
        require (!userInfo[msg.sender].claimed, 'nothing to harvest');
        uint256 offeringTokenAmount = getOfferingAmount(msg.sender);
        uint256 refundingTokenAmount = getRefundingAmount(msg.sender);

        if(offeringTokenAmount > 0 ){
            offeringToken.safeTransfer(address(msg.sender), offeringTokenAmount);
        }
        if (refundingTokenAmount > 0){
            raisingToken.safeTransfer(address(msg.sender), refundingTokenAmount);
        }
        userInfo[msg.sender].claimed = true;
        emit Harvest(msg.sender, offeringTokenAmount,refundingTokenAmount);
    }

    function hasHarvest(address _user) external view returns(bool) {
        return userInfo[_user].claimed;
    }

    // allocation
    function getUserAllocation(address _user) public view returns(uint256) {
        return userInfo[_user].amount.mul(CALC_PRECISION).div(totalAmount);
    }

    // get the amount of IDO token you will get
    function getOfferingAmount(address _user) public view returns(uint256 userOfferingTotalAmount) {
        if (totalAmount > raisingAmount){
            uint256 allocation = getUserAllocation(_user);
            userOfferingTotalAmount =  offeringAmount.mul(allocation).div(CALC_PRECISION);
        }else {
            userOfferingTotalAmount = userInfo[_user].amount.mul(offeringAmount).div(raisingAmount);
        }
    }

    // get the amount of Benchmark token you will be refunded
    function getRefundingAmount(address _user) public view returns(uint256) {
        if (totalAmount <= raisingAmount) {
            return 0;
        }
        uint256 allocation = getUserAllocation(_user);
        uint256 payAmount = raisingAmount.mul(allocation).div(CALC_PRECISION);
        return userInfo[_user].amount.sub(payAmount);
    }

    function getAddressListLength() external view returns(uint256) {
        return addressList.length;
    }

    function finalWithdrawRaisingToken(uint256 _raiseAmount) public onlyAdmin {
        require (block.timestamp > endTime, 'not allow finalWithdrawRaisingToken');
        require(_raiseAmount <= raisingAmount, 'raisingToken amount wrong');
        raisingToken.safeTransfer(finalWithAddr, _raiseAmount);
    }
    function finalWithdrawOfferingToken() public onlyAdmin {
        require (block.timestamp > endTime.add(calcDuration), 'not withdraw OfferingToken time');
        if(totalAmount < raisingAmount){
            uint256 offerUserAmount = totalAmount.mul(offeringAmount).div(raisingAmount);
            uint256 withDrawOfferAmount  = offeringAmount.sub(offerUserAmount);
            offeringToken.safeTransfer(finalWithAddr, withDrawOfferAmount);
        }
    }


    function getIDOAmounts() public view returns(uint256 raiseAmount,uint256 offerAmount,uint256 userTotalAmount){
        raiseAmount = raisingAmount; //raising
        offerAmount = offeringAmount; //offering Token
        userTotalAmount = totalAmount; //user deposit
    }

    function getIDOPrice() public view returns(uint256){
        return idoPrice;
    }

    function getStartAndEndTime() public view returns(uint256 idoStartTime,uint256 idoEndTime,uint256 idoCalcTime){
        idoStartTime = startTime;
        idoEndTime = endTime;
        idoCalcTime =  idoEndTime + calcDuration;
    }

    function getCurrBlockAndTime() public view returns(uint256 blockNum,uint256 blockTime){
        blockNum = block.number;
        blockTime = block.timestamp;
    }

    function getIDOExecuteStatus() public view returns(uint256 status){
        uint256 idoLastTime = endTime + calcDuration;
        if( (block.timestamp >= startTime) && (block.timestamp <= endTime)){
            status = 1; //start Deposit
        }else if((block.timestamp > endTime) && (block.timestamp <= idoLastTime)){
            status = 2; //calc
        }else if(block.timestamp > idoLastTime){
            status = 3; //havest
        }else{
            status =0; //not start
        }
    }

}

{
  "compilationTarget": {
    "contracts/XDX/DickBenchIDO.sol": "DickBenchIDO"
  },
  "evmVersion": "paris",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}