pragma solidity 0.4.25;

/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {

    /**
    * @dev Multiplies two numbers, throws on overflow.
    */
    function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
        // Gas optimization: this is cheaper than asserting 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        c = a * b;
        assert(c / a == b);
        return c;
    }

    /**
    * @dev Integer division of two numbers, truncating the quotient.
    */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // assert(b > 0); // Solidity automatically throws when dividing by 0
        // uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return a / b;
    }

    /**
    * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
    */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        assert(b <= a);
        return a - b;
    }

    /**
    * @dev Adds two numbers, throws on overflow.
    */
    function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
        c = a + b;
        assert(c >= a);
        return c;
    }
}

contract Ownable {
    address public owner;


    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );


    /**
     * @dev The Ownable constructor sets the original `owner` of the contract to the sender
     * account.
     */
    constructor() public {
        owner = msg.sender;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == owner);
        _;
    }


    function transferOwnership(address _newOwner) public onlyOwner {
        require(_newOwner != address(0));
        emit OwnershipTransferred(owner, _newOwner);
        owner = _newOwner;
    }


}
/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 {
    function allowance(address owner, address spender) public view returns (uint256);
    function transferFrom(address from, address to, uint256 value) public returns (bool);
    function totalSupply() public view returns (uint256);
    function balanceOf(address who) public view returns (uint256);
    function transfer(address to, uint256 value) public returns (bool);
    event Transfer(address indexed from, address indexed to, uint256 value);

    function approve(address spender, uint256 value) public returns (bool);
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; }
/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://github.com/ethereum/EIPs/issues/20
 * Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is ERC20{
    using SafeMath for uint256;

    mapping (address => mapping (address => uint256)) internal allowed;
    mapping(address => uint256) balances;

    uint256 _totalSupply;

    /**
    * @dev Total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
    * @dev Transfer token for a specified address
    * @param _to The address to transfer to.
    * @param _value The amount to be transferred.
    */
    function transfer(address _to, uint256 _value)  public returns (bool) {
        require(_to != address(0));
        require(_value <= balances[msg.sender]);

        balances[msg.sender] = balances[msg.sender].sub(_value);
        balances[_to] = balances[_to].add(_value);
        emit Transfer(msg.sender, _to, _value);
        return true;
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param _owner The address to query the the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address _owner) public view returns (uint256) {
        return balances[_owner];
    }


    /**
     * @dev Transfer tokens from one address to another
     * @param _from address The address which you want to send tokens from
     * @param _to address The address which you want to transfer to
     * @param _value uint256 the amount of tokens to be transferred
     */
    function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
        require(_to != address(0));
        require(_value <= balances[_from]);
        require(_value <= allowed[_from][msg.sender]);

        balances[_from] = balances[_from].sub(_value);
        balances[_to] = balances[_to].add(_value);
        allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
        emit Transfer(_from, _to, _value);
        return true;
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param _spender The address which will spend the funds.
     * @param _value The amount of tokens to be spent.
     */
    function approve(address _spender, uint256 _value) public returns (bool) {
        require((_value == 0) || (allowed[msg.sender][_spender] == 0));
        allowed[msg.sender][_spender] = _value;
        emit Approval(msg.sender, _spender, _value);
        return true;
    }

    /**
     * Set allowance for other address and notify
     *
     * Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
     *
     * @param _spender The address authorized to spend
     * @param _value the max amount they can spend
     * @param _extraData some extra information to send to the approved contract
     */
    function approveAndCall(address _spender, uint256 _value, bytes _extraData)  public returns (bool success) {
        tokenRecipient spender = tokenRecipient(_spender);
        if (approve(_spender, _value)) {
            spender.receiveApproval(msg.sender, _value, this, _extraData);
            return true;
        }
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param _owner address The address which owns the funds.
     * @param _spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(address _owner, address _spender) public view returns (uint256) {
        return allowed[_owner][_spender];
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed[_spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * @param _spender The address which will spend the funds.
     * @param _addedValue The amount of tokens to increase the allowance by.
     */
    function increaseApproval(address _spender, uint256 _addedValue) public returns (bool) {
        allowed[msg.sender][_spender] = (
        allowed[msg.sender][_spender].add(_addedValue));
        emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed[_spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * @param _spender The address which will spend the funds.
     * @param _subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseApproval(address _spender, uint256 _subtractedValue) public returns (bool) {
        uint256 oldValue = allowed[msg.sender][_spender];
        if (_subtractedValue > oldValue) {
            allowed[msg.sender][_spender] = 0;
        } else {
            allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
        }
        emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
        return true;
    }


}


/**
 * @title SimpleToken
 * @dev Very simple ERC20 Token example, where all tokens are pre-assigned to the creator.
 * Note they can later distribute these tokens as they wish using `transfer` and other
 * `StandardToken` functions.
 */
contract SapphireCoin is StandardToken, Ownable {
    string public constant name = "Sapphire Coin"; // solium-disable-line uppercase
    string public constant symbol = "SPH"; // solium-disable-line uppercase
    uint8 public constant decimals = 18; // solium-disable-line uppercase

    uint256 public constant INITIAL_SUPPLY = 1000000000 * (10 ** uint256(decimals));


    constructor() public {
        _totalSupply = INITIAL_SUPPLY;
        balances[msg.sender] = INITIAL_SUPPLY;
        emit Transfer(address(0), msg.sender, INITIAL_SUPPLY);
    }


    /// @notice This method can be used by the owner to extract mistakenly
    ///  sent tokens to this contract.
    /// @param _token The address of the token contract that you want to recover
    ///  set to 0 in case you want to extract ether.
    function claimTokens(address _token, address _to) external onlyOwner {
        require(_to != address(0));
        if (_token == 0x0) {
            _to.transfer(address(this).balance);
            return;
        }

        ERC20 token = ERC20(_token);
        uint balance = token.balanceOf(this);
        token.transfer(_to, balance);
    }

}

{
  "compilationTarget": {
    "SapphireCoin.sol": "SapphireCoin"
  },
  "evmVersion": "byzantium",
  "libraries": {},
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": []
}