// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.28;

interface IFactory {
  event PairCreated(address indexed token0, address indexed token1, address pair, uint);

  function getPair(address tokenA, address tokenB) external view returns (address pair);
  function allPairs(uint) external view returns (address pair);
  function allPairsLength() external view returns (uint);

  function feeTo() external view returns (address);
  function feeToSetter() external view returns (address);

  function createPair(address tokenA, address tokenB) external returns (address pair);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.28;

interface IPair {
    function getReserves()
        external
        view
        returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);

    function token0() external view returns (address);
    function token1() external view returns (address);
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.20;
pragma abicoder v2;

/// @title QuoterV2 Interface
/// @notice Supports quoting the calculated amounts from exact input or exact output swaps.
/// @notice For each pool also tells you the number of initialized ticks crossed and the sqrt price of the pool after the swap.
/// @dev These functions are not marked view because they rely on calling non-view functions and reverting
/// to compute the result. They are also not gas efficient and should not be called on-chain.
interface IQuoterV2 {
    /// @notice Returns the amount out received for a given exact input swap without executing the swap
    /// @param path The path of the swap, i.e. each token pair and the pool fee
    /// @param amountIn The amount of the first token to swap
    /// @return amountOut The amount of the last token that would be received
    /// @return sqrtPriceX96AfterList List of the sqrt price after the swap for each pool in the path
    /// @return initializedTicksCrossedList List of the initialized ticks that the swap crossed for each pool in the path
    /// @return gasEstimate The estimate of the gas that the swap consumes
    function quoteExactInput(bytes memory path, uint256 amountIn)
        external
        returns (
            uint256 amountOut,
            uint160[] memory sqrtPriceX96AfterList,
            uint32[] memory initializedTicksCrossedList,
            uint256 gasEstimate
        );

    struct QuoteExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint256 amountIn;
        uint24 fee;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Returns the amount out received for a given exact input but for a swap of a single pool
    /// @param params The params for the quote, encoded as `QuoteExactInputSingleParams`
    /// tokenIn The token being swapped in
    /// tokenOut The token being swapped out
    /// fee The fee of the token pool to consider for the pair
    /// amountIn The desired input amount
    /// sqrtPriceLimitX96 The price limit of the pool that cannot be exceeded by the swap
    /// @return amountOut The amount of `tokenOut` that would be received
    /// @return sqrtPriceX96After The sqrt price of the pool after the swap
    /// @return initializedTicksCrossed The number of initialized ticks that the swap crossed
    /// @return gasEstimate The estimate of the gas that the swap consumes
    function quoteExactInputSingle(QuoteExactInputSingleParams memory params)
        external
        returns (
            uint256 amountOut,
            uint160 sqrtPriceX96After,
            uint32 initializedTicksCrossed,
            uint256 gasEstimate
        );

    /// @notice Returns the amount in required for a given exact output swap without executing the swap
    /// @param path The path of the swap, i.e. each token pair and the pool fee. Path must be provided in reverse order
    /// @param amountOut The amount of the last token to receive
    /// @return amountIn The amount of first token required to be paid
    /// @return sqrtPriceX96AfterList List of the sqrt price after the swap for each pool in the path
    /// @return initializedTicksCrossedList List of the initialized ticks that the swap crossed for each pool in the path
    /// @return gasEstimate The estimate of the gas that the swap consumes
    function quoteExactOutput(bytes memory path, uint256 amountOut)
        external
        returns (
            uint256 amountIn,
            uint160[] memory sqrtPriceX96AfterList,
            uint32[] memory initializedTicksCrossedList,
            uint256 gasEstimate
        );

    struct QuoteExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        uint256 amount;
        uint24 fee;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Returns the amount in required to receive the given exact output amount but for a swap of a single pool
    /// @param params The params for the quote, encoded as `QuoteExactOutputSingleParams`
    /// tokenIn The token being swapped in
    /// tokenOut The token being swapped out
    /// fee The fee of the token pool to consider for the pair
    /// amountOut The desired output amount
    /// sqrtPriceLimitX96 The price limit of the pool that cannot be exceeded by the swap
    /// @return amountIn The amount required as the input for the swap in order to receive `amountOut`
    /// @return sqrtPriceX96After The sqrt price of the pool after the swap
    /// @return initializedTicksCrossed The number of initialized ticks that the swap crossed
    /// @return gasEstimate The estimate of the gas that the swap consumes
    function quoteExactOutputSingle(QuoteExactOutputSingleParams memory params)
        external
        returns (
            uint256 amountIn,
            uint160 sqrtPriceX96After,
            uint32 initializedTicksCrossed,
            uint256 gasEstimate
        );
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

interface ISwapRouterV2 {

    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );

    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;

    function swapExactTokensForETH(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);

    function swapExactETHForTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external payable returns (uint[] memory amounts);

    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;


    
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    )
        external
        payable
        returns (uint amountToken, uint amountETH, uint liquidity);

    function getAmountOut(
        uint amountIn,
        uint reserveIn,
        uint reserveOut
    ) external pure returns (uint amountOut);

    function getAmountsOut(uint256 amountIn, address[] calldata path) external view returns (uint256[] memory amounts);



    function factory() external returns (address factory);
}

interface IUniswapV3Quoter {
    function quoteExactInputSingle(
        address tokenIn,
        address tokenOut,
        uint24 fee,
        uint256 amountIn,
        uint160 sqrtPriceLimitX96
    ) external returns (uint256 amountOut);

    function quoteExactOutputSingle(
        address tokenIn,
        address tokenOut,
        uint24 fee,
        uint256 amountOut,
        uint160 sqrtPriceLimitX96
    ) external returns (uint256 amountIn);
}

interface IUniswapV3SwapRouter {

    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 sqrtPriceLimitX96;
    }

    event Swap  (address indexed sender,
        address indexed recipient,
        int256 amount0,
        int256 amount1,
        uint160 sqrtPriceX96,
        uint128 liquidity,
        int24 tick);


    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);


    function exactOutputSingle(
        address tokenIn,
        address tokenOut,
        uint24 fee,
        uint256 amountOut,
        uint256 amountInMaximum,
        address recipient,
        uint256 deadline
    ) external payable returns (uint256 amountIn);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT

// ░██████╗███╗░░██╗░█████╗░██╗██████╗░██████╗░░█████╗░████████╗
// ██╔════╝████╗░██║██╔══██╗██║██╔══██╗██╔══██╗██╔══██╗╚══██╔══╝
// ╚█████╗░██╔██╗██║███████║██║██████╔╝██████╦╝██║░░██║░░░██║░░░
// ░╚═══██╗██║╚████║██╔══██║██║██╔═══╝░██╔══██╗██║░░██║░░░██║░░░
// ██████╔╝██║░╚███║██║░░██║██║██║░░░░░██████╦╝╚█████╔╝░░░██║░░░
// ╚═════╝░╚═╝░░╚══╝╚═╝░░╚═╝╚═╝╚═╝░░░░░╚═════╝░░╚════╝░░░░╚═╝░░░

// Powered by: https://nalikes.com/

pragma solidity 0.8.28;

import {IFactory} from "./interfaces/IFactory.sol";
import {IPair} from "./interfaces/IPair.sol";
import {ISwapRouterV2} from "./interfaces/ISwapRouterV2.sol";
import {IUniswapV3Quoter} from "./interfaces/IUniswapV3Quoter.sol";
import {IUniswapV3SwapRouter} from "./interfaces/IUniswapV3SwapRouter.sol";
import {WETH} from "./interfaces/WETH.sol";
import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IQuoterV2} from "./interfaces/IQuoterV2.sol";
contract SwapBot is Ownable, ReentrancyGuard {
    using SafeERC20 for IERC20;

    uint256 public deadline = type(uint256).max;
    uint256 public fee = 100;
    uint256 public constant PERCENTAGE = 10000;

    event Trade(
        address indexed user,
        address indexed token,
        uint256 amount,
        uint256 amountOut,
        bool supportFeeOnTransfer
    );
    event AddLiquidityETH(
        address token,
        uint256 amountToken,
        uint256 amountETH,
        uint256 liquidity
    );


    constructor() Ownable() {
    }

    function internalBuyV2(
        address wtoken,
        address swap,
        address user,
        address[] memory path,
        uint256 amount,
        uint256 amountOut,
        bool supportFeeOnTransfer

    ) internal nonReentrant {
        address factoryAddr = ISwapRouterV2(swap).factory();
        address pairAddr = IFactory(factoryAddr).getPair(path[0], path[1]);
        require(pairAddr != 0x0000000000000000000000000000000000000000, "Pair not found");

        (uint112 reserve0, uint112 reserve1, ) = IPair(pairAddr).getReserves();

        (uint256 ethAmt, uint256 tokenAmt) = (reserve0, reserve1);
        if (IPair(pairAddr).token0() != wtoken) {
            (ethAmt, tokenAmt) = (reserve1, reserve0);
        }

        uint256 output = ISwapRouterV2(swap).getAmountOut(
            amount,
            ethAmt,
            tokenAmt
        );


        require(
                amountOut <= output,
                "Trade output is less than minimum expected"
            );



        uint256 ethAmount = amount * 1 wei;

        if (supportFeeOnTransfer) {
            // Use the method that supports fee on transfer tokens
            ISwapRouterV2(swap).swapExactETHForTokensSupportingFeeOnTransferTokens{value: ethAmount}(
                0,
                path,
                user,
                deadline
            );
        } else {
            // Use the original method
            ISwapRouterV2(swap).swapExactETHForTokens{value: ethAmount}(
                0,
                path,
                user,
                deadline
            );
        }
        emit Trade(user, path[1], amount, output, supportFeeOnTransfer);
    }

    function buyTokenV2(
        address wtoken,
        address swap,
        address token,
        uint256 amount,
        uint256 amountOut,
        bool supportFeeOnTransfer
    ) external payable {
        require(msg.value >= amount * (1 wei), "Insufficient ether amount");

        address[] memory path = new address[](2);
        path[0] = wtoken;
        path[1] = token;

        internalBuyV2(
            wtoken,
            swap,
            payable(msg.sender),
            path,
            (amount * (PERCENTAGE - fee)) / (PERCENTAGE),
        amountOut,
            supportFeeOnTransfer
        );
    }

    function internalSellV2(
        address wtoken,
        address swap,
        address payable user,
        address[] memory path,
        uint256 amount,
        uint256 amountOut,
        bool supportFeeOnTransfer
    ) internal nonReentrant {
        address factoryAddr = ISwapRouterV2(swap).factory();
        address pairAddr = IFactory(factoryAddr).getPair(path[0], path[1]);
        (uint112 reserve0, uint112 reserve1, ) = IPair(pairAddr).getReserves();

        IERC20(path[0]).approve(swap, amount);

        (uint256 ethAmt, uint256 tokenAmt) = (reserve0, reserve1);
        if (IPair(pairAddr).token0() != wtoken) {
            (ethAmt, tokenAmt) = (reserve1, reserve0);
        }


        uint256 output = ISwapRouterV2(swap).getAmountOut(
            amount,
            tokenAmt,
            ethAmt
        );


        require(
            amountOut <= output,
            "Trade output is less than minimum expected"
        );


        uint256 initialBalance = address(this).balance;

        if (supportFeeOnTransfer) {
            // Use the method that supports fee on transfer tokens
            ISwapRouterV2(swap).swapExactTokensForETHSupportingFeeOnTransferTokens(
                amount,
                0,
                path,
                address(this),
                deadline
            );
        } else {
            // Use the original method
            ISwapRouterV2(swap).swapExactTokensForETH(
                amount,
                0,
                path,
                address(this),
                deadline
            );
        }

        uint256 actualOutput = address(this).balance - initialBalance;
        uint256 userAmount = (actualOutput * (PERCENTAGE - fee)) / PERCENTAGE;
        user.transfer(userAmount);
        emit Trade(user, path[0], amount, userAmount, supportFeeOnTransfer);
    }

    function sellTokenV2(
        address wtoken,
        address swap,
        address token,
        uint256 amount,
        uint256 amountOut,
        bool supportFeeOnTransfer
    ) external payable {
        require(
            IERC20(token).balanceOf(msg.sender) >= amount,
            "Insufficient token balance"
        );

        IERC20(token).safeTransferFrom(msg.sender, address(this), amount);

        address[] memory path = new address[](2);
        path[0] = token;
        path[1] = wtoken;

        internalSellV2(wtoken, swap, payable(msg.sender), path, amount, amountOut, supportFeeOnTransfer);
    }

    function getEstimatedAmountOutV3(
        address quoterAddr,
        address tokenIn,
        address tokenOut,
        uint256 amountIn,
        uint24 poolFee
    ) external returns (uint256 estimatedAmountOutV3) {

        estimatedAmountOutV3 = IUniswapV3Quoter(quoterAddr).quoteExactInputSingle(
            tokenIn,
            tokenOut,
            poolFee,
            amountIn,
            0 // No price limit
        ) * (PERCENTAGE - fee) / PERCENTAGE;
    }

    function getEstimatedAmountOutV2(
        address uniswapV2,
        address tokenIn,
        address tokenOut,
        uint256 amountIn
    ) external view returns (uint256 estimatedAmountOutV2) {
        address[] memory path = new address[](2);
            path[0] = tokenIn;
            path[1] = tokenOut;


        uint256[] memory amountsOut = ISwapRouterV2(uniswapV2).getAmountsOut(
                amountIn,
                path
            );

        estimatedAmountOutV2 = amountsOut[1] * (PERCENTAGE - fee) / PERCENTAGE;
    }

    // Function to swap ETH for Token (no fee deduction)
    function buyTokenV3(
        address swapRouter,
        address wtoken,
        address tokenOut,
        uint24 feeTier,
        uint256 amountOutMinimum,
        address recipient
    ) external payable returns (uint256 amountOut) {
        // Ensure the ETH sent is greater than 0
        require(msg.value > 0, "ETH required");

        uint256 amountIn = msg.value * (PERCENTAGE - fee) / PERCENTAGE;

        IUniswapV3SwapRouter.ExactInputSingleParams memory params =
                            IUniswapV3SwapRouter.ExactInputSingleParams({
                tokenIn : wtoken,
                tokenOut : tokenOut,
                fee : feeTier,
                recipient : recipient,
                amountIn : amountIn,
                amountOutMinimum : amountOutMinimum,
                sqrtPriceLimitX96 : 0
            });
        // The call to `exactInputSingle` executes the swap.
        amountOut = IUniswapV3SwapRouter(swapRouter).exactInputSingle{value: amountIn}(params);
    }

    // Function to swap Token for ETH (no fee deduction)
    function sellTokenV3(
        address swapRouter,
        address tokenIn,
        address wtoken,
        uint256 amountIn,
        uint24 feeTier,
        uint256 amountOutMinimum,
        address recipient
    ) external returns (uint256 amountOut) {
        // Transfer the tokens to the contract
        IERC20(tokenIn).safeTransferFrom(msg.sender, address(this), amountIn);

        IERC20(tokenIn).approve(swapRouter, amountIn);

        IUniswapV3SwapRouter.ExactInputSingleParams memory params =
                            IUniswapV3SwapRouter.ExactInputSingleParams({
                tokenIn : tokenIn,
                tokenOut : wtoken,
                fee : feeTier,
                recipient : address(this),
                amountIn : amountIn,
                amountOutMinimum : amountOutMinimum,
                sqrtPriceLimitX96 : 0
            });

        uint256 initialBalance = WETH(wtoken).balanceOf(address(this));

        // Swap Token for ETH
        IUniswapV3SwapRouter(swapRouter).exactInputSingle(params);

        uint256 newBalance = WETH(wtoken).balanceOf(address(this));

        WETH(wtoken).withdraw(newBalance);
        amountOut = ((newBalance - initialBalance) * (PERCENTAGE - fee)) / PERCENTAGE;
        // Send the ETH to the recipient
        payable(recipient).transfer(amountOut);

    }


    function setFee(uint256 _fee) external onlyOwner {
        fee = _fee;
    }

    function withdraw(
        uint256 _amount,
        address payable _receiver
    ) external onlyOwner {
        _receiver.transfer(_amount);
    }

    receive() external payable {}
    fallback() external payable {}
}

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface WETH is IERC20 {
    function deposit() external payable;
    function withdraw(uint256 wad) external;

}

{
  "compilationTarget": {
    "contracts/SwapBot.sol": "SwapBot"
  },
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 100
  },
  "remappings": [],
  "viaIR": true
}