// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/token/common/ERC2981.sol";

/**
 * @title BasicRoyaltiesBase
 * @author Limit Break, Inc.
 * @dev Base functionality of an NFT mix-in contract implementing the most basic form of programmable royalties.
 */
abstract contract BasicRoyaltiesBase is ERC2981 {

    event DefaultRoyaltySet(address indexed receiver, uint96 feeNumerator);
    event TokenRoyaltySet(uint256 indexed tokenId, address indexed receiver, uint96 feeNumerator);

    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual override {
        super._setDefaultRoyalty(receiver, feeNumerator);
        emit DefaultRoyaltySet(receiver, feeNumerator);
    }

    function _setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) internal virtual override {
        super._setTokenRoyalty(tokenId, receiver, feeNumerator);
        emit TokenRoyaltySet(tokenId, receiver, feeNumerator);
    }
}

/**
 * @title BasicRoyalties
 * @author Limit Break, Inc.
 * @notice Constructable BasicRoyalties Contract implementation.
 */
abstract contract BasicRoyalties is BasicRoyaltiesBase {
    constructor(address receiver, uint96 feeNumerator) {
        _setDefaultRoyalty(receiver, feeNumerator);
    }
}

/**
 * @title BasicRoyaltiesInitializable
 * @author Limit Break, Inc.
 * @notice Initializable BasicRoyalties Contract implementation to allow for EIP-1167 clones. 
 */
abstract contract BasicRoyaltiesInitializable is BasicRoyaltiesBase {}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../access/OwnablePermissions.sol";

/**
 * @title ClaimPeriodBase
 * @author Limit Break, Inc.
 * @notice In order to support multiple contracts with enforced claim periods, the claim period has been moved to this base contract.
 *
 */
abstract contract ClaimPeriodBase is OwnablePermissions {

    error ClaimPeriodBase__ClaimsMustBeClosedToReopen();
    error ClaimPeriodBase__ClaimPeriodIsNotOpen();
    error ClaimPeriodBase__ClaimPeriodMustBeClosedInTheFuture();

    /// @dev True if claims have been initalized, false otherwise.
    bool private claimPeriodInitialized;

    /// @dev The timestamp when the claim period closes - when this value is zero and claims are open, the claim period is open indefinitely
    uint256 private claimPeriodClosingTimestamp;

    /// @dev Emitted when a claim period is scheduled to be closed.
    event ClaimPeriodClosing(uint256 claimPeriodClosingTimestamp);

    /// @dev Emitted when a claim period is scheduled to be opened.
    event ClaimPeriodOpened(uint256 claimPeriodClosingTimestamp);

    /// @dev Opens the claim period.  Claims can be closed with a custom amount of warning time using the closeClaims function.
    /// Accepts a claimPeriodClosingTimestamp_ timestamp which will open the period ending at that time (in seconds)
    /// NOTE: Use as high a window as possible to prevent gas wars for claiming
    /// For an unbounded claim window, pass in type(uint256).max
    function openClaims(uint256 claimPeriodClosingTimestamp_) external {
        _requireCallerIsContractOwner();

        if(claimPeriodClosingTimestamp_ <= block.timestamp) {
            revert ClaimPeriodBase__ClaimPeriodMustBeClosedInTheFuture();
        }

        _onClaimPeriodOpening();

        if(claimPeriodInitialized) {
            if(block.timestamp < claimPeriodClosingTimestamp) {
                revert ClaimPeriodBase__ClaimsMustBeClosedToReopen();
            }
        } else {
            claimPeriodInitialized = true;
        }

        claimPeriodClosingTimestamp = claimPeriodClosingTimestamp_;

        emit ClaimPeriodOpened(claimPeriodClosingTimestamp_);
    }

    /// @dev Closes claims at a specified timestamp.
    ///
    /// Throws when the specified timestamp is not in the future.
    function closeClaims(uint256 claimPeriodClosingTimestamp_) external {
        _requireCallerIsContractOwner();

        _requireClaimsOpen();

        if(claimPeriodClosingTimestamp_ <= block.timestamp) {
            revert ClaimPeriodBase__ClaimPeriodMustBeClosedInTheFuture();
        }

        claimPeriodClosingTimestamp = claimPeriodClosingTimestamp_;
        
        emit ClaimPeriodClosing(claimPeriodClosingTimestamp_);
    }

    /// @dev Returns the Claim Period Timestamp
    function getClaimPeriodClosingTimestamp() external view returns (uint256) {
        return claimPeriodClosingTimestamp;
    }

    /// @notice Returns true if the claim period has been opened, false otherwise
    function isClaimPeriodOpen() external view returns (bool) {
        return _isClaimPeriodOpen();
    }

    /// @dev Returns true if claim period is open, false otherwise.
    function _isClaimPeriodOpen() internal view returns (bool) {
        return claimPeriodInitialized && block.timestamp < claimPeriodClosingTimestamp;
    }

    /// @dev Validates that the claim period is open.
    /// Throws if claims are not open.
    function _requireClaimsOpen() internal view {
        if(!_isClaimPeriodOpen()) {
            revert ClaimPeriodBase__ClaimPeriodIsNotOpen();
        }
    }

    /// @dev Hook to allow inheriting contracts to perform state validation when opening the claim period
    function _onClaimPeriodOpening() internal virtual {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../access/OwnablePermissions.sol";
import "../interfaces/ICreatorToken.sol";
import "../interfaces/ICreatorTokenTransferValidator.sol";
import "../utils/TransferValidation.sol";
import "@openzeppelin/contracts/interfaces/IERC165.sol";

/**
 * @title CreatorTokenBase
 * @author Limit Break, Inc.
 * @notice CreatorTokenBase is an abstract contract that provides basic functionality for managing token 
 * transfer policies through an implementation of ICreatorTokenTransferValidator. This contract is intended to be used
 * as a base for creator-specific token contracts, enabling customizable transfer restrictions and security policies.
 *
 * <h4>Features:</h4>
 * <ul>Ownable: This contract can have an owner who can set and update the transfer validator.</ul>
 * <ul>TransferValidation: Implements the basic token transfer validation interface.</ul>
 * <ul>ICreatorToken: Implements the interface for creator tokens, providing view functions for token security policies.</ul>
 *
 * <h4>Benefits:</h4>
 * <ul>Provides a flexible and modular way to implement custom token transfer restrictions and security policies.</ul>
 * <ul>Allows creators to enforce policies such as whitelisted operators and permitted contract receivers.</ul>
 * <ul>Can be easily integrated into other token contracts as a base contract.</ul>
 *
 * <h4>Intended Usage:</h4>
 * <ul>Use as a base contract for creator token implementations that require advanced transfer restrictions and 
 *   security policies.</ul>
 * <ul>Set and update the ICreatorTokenTransferValidator implementation contract to enforce desired policies for the 
 *   creator token.</ul>
 */
abstract contract CreatorTokenBase is OwnablePermissions, TransferValidation, ICreatorToken {
    
    error CreatorTokenBase__InvalidTransferValidatorContract();
    error CreatorTokenBase__SetTransferValidatorFirst();

    address public constant DEFAULT_TRANSFER_VALIDATOR = address(0x0000721C310194CcfC01E523fc93C9cCcFa2A0Ac);
    TransferSecurityLevels public constant DEFAULT_TRANSFER_SECURITY_LEVEL = TransferSecurityLevels.One;
    uint120 public constant DEFAULT_OPERATOR_WHITELIST_ID = uint120(1);

    ICreatorTokenTransferValidator private transferValidator;

    /**
     * @notice Allows the contract owner to set the transfer validator to the official validator contract
     *         and set the security policy to the recommended default settings.
     * @dev    May be overridden to change the default behavior of an individual collection.
     */
    function setToDefaultSecurityPolicy() public virtual {
        _requireCallerIsContractOwner();
        setTransferValidator(DEFAULT_TRANSFER_VALIDATOR);
        ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setTransferSecurityLevelOfCollection(address(this), DEFAULT_TRANSFER_SECURITY_LEVEL);
        ICreatorTokenTransferValidator(DEFAULT_TRANSFER_VALIDATOR).setOperatorWhitelistOfCollection(address(this), DEFAULT_OPERATOR_WHITELIST_ID);
    }

    /**
     * @notice Allows the contract owner to set the transfer validator to a custom validator contract
     *         and set the security policy to their own custom settings.
     */
    function setToCustomValidatorAndSecurityPolicy(
        address validator, 
        TransferSecurityLevels level, 
        uint120 operatorWhitelistId, 
        uint120 permittedContractReceiversAllowlistId) public {
        _requireCallerIsContractOwner();

        setTransferValidator(validator);

        ICreatorTokenTransferValidator(validator).
            setTransferSecurityLevelOfCollection(address(this), level);

        ICreatorTokenTransferValidator(validator).
            setOperatorWhitelistOfCollection(address(this), operatorWhitelistId);

        ICreatorTokenTransferValidator(validator).
            setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId);
    }

    /**
     * @notice Allows the contract owner to set the security policy to their own custom settings.
     * @dev    Reverts if the transfer validator has not been set.
     */
    function setToCustomSecurityPolicy(
        TransferSecurityLevels level, 
        uint120 operatorWhitelistId, 
        uint120 permittedContractReceiversAllowlistId) public {
        _requireCallerIsContractOwner();

        ICreatorTokenTransferValidator validator = getTransferValidator();
        if (address(validator) == address(0)) {
            revert CreatorTokenBase__SetTransferValidatorFirst();
        }

        validator.setTransferSecurityLevelOfCollection(address(this), level);
        validator.setOperatorWhitelistOfCollection(address(this), operatorWhitelistId);
        validator.setPermittedContractReceiverAllowlistOfCollection(address(this), permittedContractReceiversAllowlistId);
    }

    /**
     * @notice Sets the transfer validator for the token contract.
     *
     * @dev    Throws when provided validator contract is not the zero address and doesn't support 
     *         the ICreatorTokenTransferValidator interface. 
     * @dev    Throws when the caller is not the contract owner.
     *
     * @dev    <h4>Postconditions:</h4>
     *         1. The transferValidator address is updated.
     *         2. The `TransferValidatorUpdated` event is emitted.
     *
     * @param transferValidator_ The address of the transfer validator contract.
     */
    function setTransferValidator(address transferValidator_) public {
        _requireCallerIsContractOwner();

        bool isValidTransferValidator = false;

        if(transferValidator_.code.length > 0) {
            try IERC165(transferValidator_).supportsInterface(type(ICreatorTokenTransferValidator).interfaceId) 
                returns (bool supportsInterface) {
                isValidTransferValidator = supportsInterface;
            } catch {}
        }

        if(transferValidator_ != address(0) && !isValidTransferValidator) {
            revert CreatorTokenBase__InvalidTransferValidatorContract();
        }

        emit TransferValidatorUpdated(address(transferValidator), transferValidator_);

        transferValidator = ICreatorTokenTransferValidator(transferValidator_);
    }

    /**
     * @notice Returns the transfer validator contract address for this token contract.
     */
    function getTransferValidator() public view override returns (ICreatorTokenTransferValidator) {
        return transferValidator;
    }

    /**
     * @notice Returns the security policy for this token contract, which includes:
     *         Transfer security level, operator whitelist id, permitted contract receiver allowlist id.
     */
    function getSecurityPolicy() public view override returns (CollectionSecurityPolicy memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getCollectionSecurityPolicy(address(this));
        }

        return CollectionSecurityPolicy({
            transferSecurityLevel: TransferSecurityLevels.Zero,
            operatorWhitelistId: 0,
            permittedContractReceiversId: 0
        });
    }

    /**
     * @notice Returns the list of all whitelisted operators for this token contract.
     * @dev    This can be an expensive call and should only be used in view-only functions.
     */
    function getWhitelistedOperators() public view override returns (address[] memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getWhitelistedOperators(
                transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId);
        }

        return new address[](0);
    }

    /**
     * @notice Returns the list of permitted contract receivers for this token contract.
     * @dev    This can be an expensive call and should only be used in view-only functions.
     */
    function getPermittedContractReceivers() public view override returns (address[] memory) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.getPermittedContractReceivers(
                transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId);
        }

        return new address[](0);
    }

    /**
     * @notice Checks if an operator is whitelisted for this token contract.
     * @param operator The address of the operator to check.
     */
    function isOperatorWhitelisted(address operator) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.isOperatorWhitelisted(
                transferValidator.getCollectionSecurityPolicy(address(this)).operatorWhitelistId, operator);
        }

        return false;
    }

    /**
     * @notice Checks if a contract receiver is permitted for this token contract.
     * @param receiver The address of the receiver to check.
     */
    function isContractReceiverPermitted(address receiver) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            return transferValidator.isContractReceiverPermitted(
                transferValidator.getCollectionSecurityPolicy(address(this)).permittedContractReceiversId, receiver);
        }

        return false;
    }

    /**
     * @notice Determines if a transfer is allowed based on the token contract's security policy.  Use this function
     *         to simulate whether or not a transfer made by the specified `caller` from the `from` address to the `to`
     *         address would be allowed by this token's security policy.
     *
     * @notice This function only checks the security policy restrictions and does not check whether token ownership
     *         or approvals are in place. 
     *
     * @param caller The address of the simulated caller.
     * @param from   The address of the sender.
     * @param to     The address of the receiver.
     * @return       True if the transfer is allowed, false otherwise.
     */
    function isTransferAllowed(address caller, address from, address to) public view override returns (bool) {
        if (address(transferValidator) != address(0)) {
            try transferValidator.applyCollectionTransferPolicy(caller, from, to) {
                return true;
            } catch {
                return false;
            }
        }
        return true;
    }

    /**
     * @dev Pre-validates a token transfer, reverting if the transfer is not allowed by this token's security policy.
     *      Inheriting contracts are responsible for overriding the _beforeTokenTransfer function, or its equivalent
     *      and calling _validateBeforeTransfer so that checks can be properly applied during token transfers.
     *
     * @dev Throws when the transfer doesn't comply with the collection's transfer policy, if the transferValidator is
     *      set to a non-zero address.
     *
     * @param caller  The address of the caller.
     * @param from    The address of the sender.
     * @param to      The address of the receiver.
     */
    function _preValidateTransfer(
        address caller, 
        address from, 
        address to, 
        uint256 /*tokenId*/, 
        uint256 /*value*/) internal virtual override {
        if (address(transferValidator) != address(0)) {
            transferValidator.applyCollectionTransferPolicy(caller, from, to);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC1155/ERC1155.sol)

pragma solidity ^0.8.0;

import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the basic standard multi-token.
 * See https://eips.ethereum.org/EIPS/eip-1155
 * Originally based on code by Enjin: https://github.com/enjin/erc-1155
 *
 * _Available since v3.1._
 */
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
    using Address for address;

    // Mapping from token ID to account balances
    mapping(uint256 => mapping(address => uint256)) private _balances;

    // Mapping from account to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    // Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
    string private _uri;

    /**
     * @dev See {_setURI}.
     */
    constructor(string memory uri_) {
        _setURI(uri_);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC1155).interfaceId ||
            interfaceId == type(IERC1155MetadataURI).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC1155MetadataURI-uri}.
     *
     * This implementation returns the same URI for *all* token types. It relies
     * on the token type ID substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * Clients calling this function must replace the `\{id\}` substring with the
     * actual token type ID.
     */
    function uri(uint256) public view virtual override returns (string memory) {
        return _uri;
    }

    /**
     * @dev See {IERC1155-balanceOf}.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
        require(account != address(0), "ERC1155: address zero is not a valid owner");
        return _balances[id][account];
    }

    /**
     * @dev See {IERC1155-balanceOfBatch}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
        public
        view
        virtual
        override
        returns (uint256[] memory)
    {
        require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");

        uint256[] memory batchBalances = new uint256[](accounts.length);

        for (uint256 i = 0; i < accounts.length; ++i) {
            batchBalances[i] = balanceOf(accounts[i], ids[i]);
        }

        return batchBalances;
    }

    /**
     * @dev See {IERC1155-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC1155-isApprovedForAll}.
     */
    function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[account][operator];
    }

    /**
     * @dev See {IERC1155-safeTransferFrom}.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeTransferFrom(from, to, id, amount, data);
    }

    /**
     * @dev See {IERC1155-safeBatchTransferFrom}.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) public virtual override {
        require(
            from == _msgSender() || isApprovedForAll(from, _msgSender()),
            "ERC1155: caller is not token owner or approved"
        );
        _safeBatchTransferFrom(from, to, ids, amounts, data);
    }

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }
        _balances[id][to] += amount;

        emit TransferSingle(operator, from, to, id, amount);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _safeBatchTransferFrom(
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
        require(to != address(0), "ERC1155: transfer to the zero address");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; ++i) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
            _balances[id][to] += amount;
        }

        emit TransferBatch(operator, from, to, ids, amounts);

        _afterTokenTransfer(operator, from, to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
    }

    /**
     * @dev Sets a new URI for all token types, by relying on the token type ID
     * substitution mechanism
     * https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
     *
     * By this mechanism, any occurrence of the `\{id\}` substring in either the
     * URI or any of the amounts in the JSON file at said URI will be replaced by
     * clients with the token type ID.
     *
     * For example, the `https://token-cdn-domain/\{id\}.json` URI would be
     * interpreted by clients as
     * `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
     * for token type ID 0x4cce0.
     *
     * See {uri}.
     *
     * Because these URIs cannot be meaningfully represented by the {URI} event,
     * this function emits no events.
     */
    function _setURI(string memory newuri) internal virtual {
        _uri = newuri;
    }

    /**
     * @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function _mint(
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        _balances[id][to] += amount;
        emit TransferSingle(operator, address(0), to, id, amount);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function _mintBatch(
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {
        require(to != address(0), "ERC1155: mint to the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, address(0), to, ids, amounts, data);

        for (uint256 i = 0; i < ids.length; i++) {
            _balances[ids[i]][to] += amounts[i];
        }

        emit TransferBatch(operator, address(0), to, ids, amounts);

        _afterTokenTransfer(operator, address(0), to, ids, amounts, data);

        _doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
    }

    /**
     * @dev Destroys `amount` tokens of token type `id` from `from`
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `from` must have at least `amount` tokens of token type `id`.
     */
    function _burn(
        address from,
        uint256 id,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");

        address operator = _msgSender();
        uint256[] memory ids = _asSingletonArray(id);
        uint256[] memory amounts = _asSingletonArray(amount);

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        uint256 fromBalance = _balances[id][from];
        require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
        unchecked {
            _balances[id][from] = fromBalance - amount;
        }

        emit TransferSingle(operator, from, address(0), id, amount);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     */
    function _burnBatch(
        address from,
        uint256[] memory ids,
        uint256[] memory amounts
    ) internal virtual {
        require(from != address(0), "ERC1155: burn from the zero address");
        require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");

        address operator = _msgSender();

        _beforeTokenTransfer(operator, from, address(0), ids, amounts, "");

        for (uint256 i = 0; i < ids.length; i++) {
            uint256 id = ids[i];
            uint256 amount = amounts[i];

            uint256 fromBalance = _balances[id][from];
            require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
            unchecked {
                _balances[id][from] = fromBalance - amount;
            }
        }

        emit TransferBatch(operator, from, address(0), ids, amounts);

        _afterTokenTransfer(operator, from, address(0), ids, amounts, "");
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(
        address owner,
        address operator,
        bool approved
    ) internal virtual {
        require(owner != operator, "ERC1155: setting approval status for self");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `ids` and `amounts` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting
     * and burning, as well as batched variants.
     *
     * The same hook is called on both single and batched variants. For single
     * transfers, the length of the `id` and `amount` arrays will be 1.
     *
     * Calling conditions (for each `id` and `amount` pair):
     *
     * - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * of token type `id` will be  transferred to `to`.
     * - When `from` is zero, `amount` tokens of token type `id` will be minted
     * for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
     * will be burned.
     * - `from` and `to` are never both zero.
     * - `ids` and `amounts` have the same, non-zero length.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) internal virtual {}

    function _doSafeTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
                if (response != IERC1155Receiver.onERC1155Received.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _doSafeBatchTransferAcceptanceCheck(
        address operator,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory amounts,
        bytes memory data
    ) private {
        if (to.isContract()) {
            try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
                bytes4 response
            ) {
                if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
                    revert("ERC1155: ERC1155Receiver rejected tokens");
                }
            } catch Error(string memory reason) {
                revert(reason);
            } catch {
                revert("ERC1155: transfer to non-ERC1155Receiver implementer");
            }
        }
    }

    function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
        uint256[] memory array = new uint256[](1);
        array[0] = element;

        return array;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../utils/CreatorTokenBase.sol";
import "../token/erc1155/ERC1155OpenZeppelin.sol";

/**
 * @title ERC1155C
 * @author Limit Break, Inc.
 * @notice Extends OpenZeppelin's ERC1155 implementation with Creator Token functionality, which
 *         allows the contract owner to update the transfer validation logic by managing a security policy in
 *         an external transfer validation security policy registry.  See {CreatorTokenTransferValidator}.
 */
abstract contract ERC1155C is ERC1155OpenZeppelin, CreatorTokenBase {

    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(ICreatorToken).interfaceId || super.supportsInterface(interfaceId);
    }

    /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic
    function _beforeTokenTransfer(
        address /*operator*/,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory /*amounts*/,
        bytes memory /*data*/
    ) internal virtual override {
        uint256 idsArrayLength = ids.length;
        for (uint256 i = 0; i < idsArrayLength;) {
            _validateBeforeTransfer(from, to, ids[i]);

            unchecked {
                ++i;
            }
        }
    }

    /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic
    function _afterTokenTransfer(
        address /*operator*/,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory /*amounts*/,
        bytes memory /*data*/
    ) internal virtual override {
        uint256 idsArrayLength = ids.length;
        for (uint256 i = 0; i < idsArrayLength;) {
            _validateAfterTransfer(from, to, ids[i]);

            unchecked {
                ++i;
            }
        }
    }
}

/**
 * @title ERC1155CInitializable
 * @author Limit Break, Inc.
 * @notice Initializable implementation of ERC1155C to allow for EIP-1167 proxy clones.
 */
abstract contract ERC1155CInitializable is ERC1155OpenZeppelinInitializable, CreatorTokenBase {

    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(ICreatorToken).interfaceId || super.supportsInterface(interfaceId);
    }

    /// @dev Ties the open-zeppelin _beforeTokenTransfer hook to more granular transfer validation logic
    function _beforeTokenTransfer(
        address /*operator*/,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory /*amounts*/,
        bytes memory /*data*/
    ) internal virtual override {
        uint256 idsArrayLength = ids.length;
        for (uint256 i = 0; i < idsArrayLength;) {
            _validateBeforeTransfer(from, to, ids[i]);

            unchecked {
                ++i;
            }
        }
    }

    /// @dev Ties the open-zeppelin _afterTokenTransfer hook to more granular transfer validation logic
    function _afterTokenTransfer(
        address /*operator*/,
        address from,
        address to,
        uint256[] memory ids,
        uint256[] memory /*amounts*/,
        bytes memory /*data*/
    ) internal virtual override {
        uint256 idsArrayLength = ids.length;
        for (uint256 i = 0; i < idsArrayLength;) {
            _validateAfterTransfer(from, to, ids[i]);

            unchecked {
                ++i;
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.4;

import "../../access/OwnablePermissions.sol";
import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";

abstract contract ERC1155OpenZeppelinBase is ERC1155 {

}

abstract contract ERC1155OpenZeppelin is ERC1155OpenZeppelinBase {
    constructor(string memory uri_) ERC1155(uri_) {}
}

abstract contract ERC1155OpenZeppelinInitializable is OwnablePermissions, ERC1155OpenZeppelinBase {

    error ERC1155OpenZeppelinInitializable__AlreadyInitializedERC1155();

    bool private _erc1155Initialized;

    function initializeERC1155(string memory uri_) public {
        _requireCallerIsContractOwner();

        if(_erc1155Initialized) {
            revert ERC1155OpenZeppelinInitializable__AlreadyInitializedERC1155();
        }

        _erc1155Initialized = true;

        _setURI(uri_);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/common/ERC2981.sol)

pragma solidity ^0.8.0;

import "../../interfaces/IERC2981.sol";
import "../../utils/introspection/ERC165.sol";

/**
 * @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.
 *
 * Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for
 * specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.
 *
 * Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the
 * fee is specified in basis points by default.
 *
 * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
 * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
 * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
 *
 * _Available since v4.5._
 */
abstract contract ERC2981 is IERC2981, ERC165 {
    struct RoyaltyInfo {
        address receiver;
        uint96 royaltyFraction;
    }

    RoyaltyInfo private _defaultRoyaltyInfo;
    mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
        return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @inheritdoc IERC2981
     */
    function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public view virtual override returns (address, uint256) {
        RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];

        if (royalty.receiver == address(0)) {
            royalty = _defaultRoyaltyInfo;
        }

        uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();

        return (royalty.receiver, royaltyAmount);
    }

    /**
     * @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a
     * fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an
     * override.
     */
    function _feeDenominator() internal pure virtual returns (uint96) {
        return 10000;
    }

    /**
     * @dev Sets the royalty information that all ids in this contract will default to.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {
        require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
        require(receiver != address(0), "ERC2981: invalid receiver");

        _defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Removes default royalty information.
     */
    function _deleteDefaultRoyalty() internal virtual {
        delete _defaultRoyaltyInfo;
    }

    /**
     * @dev Sets the royalty information for a specific token id, overriding the global default.
     *
     * Requirements:
     *
     * - `receiver` cannot be the zero address.
     * - `feeNumerator` cannot be greater than the fee denominator.
     */
    function _setTokenRoyalty(
        uint256 tokenId,
        address receiver,
        uint96 feeNumerator
    ) internal virtual {
        require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
        require(receiver != address(0), "ERC2981: Invalid parameters");

        _tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);
    }

    /**
     * @dev Resets royalty information for the token id back to the global default.
     */
    function _resetTokenRoyalty(uint256 tokenId) internal virtual {
        delete _tokenRoyaltyInfo[tokenId];
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../interfaces/ICreatorTokenTransferValidator.sol";

interface ICreatorToken {
    event TransferValidatorUpdated(address oldValidator, address newValidator);

    function getTransferValidator() external view returns (ICreatorTokenTransferValidator);
    function getSecurityPolicy() external view returns (CollectionSecurityPolicy memory);
    function getWhitelistedOperators() external view returns (address[] memory);
    function getPermittedContractReceivers() external view returns (address[] memory);
    function isOperatorWhitelisted(address operator) external view returns (bool);
    function isContractReceiverPermitted(address receiver) external view returns (bool);
    function isTransferAllowed(address caller, address from, address to) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "./IEOARegistry.sol";
import "./ITransferSecurityRegistry.sol";
import "./ITransferValidator.sol";

interface ICreatorTokenTransferValidator is ITransferSecurityRegistry, ITransferValidator, IEOARegistry {}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/utils/introspection/IERC165.sol";

interface IEOARegistry is IERC165 {
    function isVerifiedEOA(address account) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);

    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );

    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);

    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);

    /**
     * @dev Returns the amount of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
        external
        view
        returns (uint256[] memory);

    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);

    /**
     * @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `amount`.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 id,
        uint256 amount,
        bytes calldata data
    ) external;

    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * Emits a {TransferBatch} event.
     *
     * Requirements:
     *
     * - `ids` and `amounts` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata amounts,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)

pragma solidity ^0.8.0;

import "../IERC1155.sol";

/**
 * @dev Interface of the optional ERC1155MetadataExtension interface, as defined
 * in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
 *
 * _Available since v3.1._
 */
interface IERC1155MetadataURI is IERC1155 {
    /**
     * @dev Returns the URI for token type `id`.
     *
     * If the `\{id\}` substring is present in the URI, it must be replaced by
     * clients with the actual token type ID.
     */
    function uri(uint256 id) external view returns (string memory);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)

pragma solidity ^0.8.0;

import "../utils/introspection/IERC165.sol";

/**
 * @dev Interface for the NFT Royalty Standard.
 *
 * A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
 * support for royalty payments across all NFT marketplaces and ecosystem participants.
 *
 * _Available since v4.5._
 */
interface IERC2981 is IERC165 {
    /**
     * @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
     * exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
     */
    function royaltyInfo(uint256 tokenId, uint256 salePrice)
        external
        view
        returns (address receiver, uint256 royaltyAmount);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../utils/TransferPolicy.sol";

interface ITransferSecurityRegistry {
    event AddedToAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account);
    event CreatedAllowlist(AllowlistTypes indexed kind, uint256 indexed id, string indexed name);
    event ReassignedAllowlistOwnership(AllowlistTypes indexed kind, uint256 indexed id, address indexed newOwner);
    event RemovedFromAllowlist(AllowlistTypes indexed kind, uint256 indexed id, address indexed account);
    event SetAllowlist(AllowlistTypes indexed kind, address indexed collection, uint120 indexed id);
    event SetTransferSecurityLevel(address indexed collection, TransferSecurityLevels level);

    function createOperatorWhitelist(string calldata name) external returns (uint120);
    function createPermittedContractReceiverAllowlist(string calldata name) external returns (uint120);
    function reassignOwnershipOfOperatorWhitelist(uint120 id, address newOwner) external;
    function reassignOwnershipOfPermittedContractReceiverAllowlist(uint120 id, address newOwner) external;
    function renounceOwnershipOfOperatorWhitelist(uint120 id) external;
    function renounceOwnershipOfPermittedContractReceiverAllowlist(uint120 id) external;
    function setTransferSecurityLevelOfCollection(address collection, TransferSecurityLevels level) external;
    function setOperatorWhitelistOfCollection(address collection, uint120 id) external;
    function setPermittedContractReceiverAllowlistOfCollection(address collection, uint120 id) external;
    function addOperatorToWhitelist(uint120 id, address operator) external;
    function addPermittedContractReceiverToAllowlist(uint120 id, address receiver) external;
    function removeOperatorFromWhitelist(uint120 id, address operator) external;
    function removePermittedContractReceiverFromAllowlist(uint120 id, address receiver) external;
    function getCollectionSecurityPolicy(address collection) external view returns (CollectionSecurityPolicy memory);
    function getWhitelistedOperators(uint120 id) external view returns (address[] memory);
    function getPermittedContractReceivers(uint120 id) external view returns (address[] memory);
    function isOperatorWhitelisted(uint120 id, address operator) external view returns (bool);
    function isContractReceiverPermitted(uint120 id, address receiver) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "../utils/TransferPolicy.sol";

interface ITransferValidator {
    function applyCollectionTransferPolicy(address caller, address from, address to) external view;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates merkle trees that are safe
 * against this attack out of the box.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(
        bytes32[] memory proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     *
     * _Available since v4.7._
     */
    function verifyCalldata(
        bytes32[] calldata proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     *
     * _Available since v4.7._
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
     * respectively.
     *
     * CAUTION: Not all merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
     *
     * _Available since v4.7._
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

/**
 * @title MintTokenBase
 * @author Limit Break, Inc.
 * @dev Standard mint token interface for mixins to mint tokens.
 */
abstract contract MintTokenBase {
    /// @dev Inheriting contracts must implement the token minting logic - inheriting contract should use _mint, or something equivalent
    /// The minting function should throw if `to` is address(0)
    function _mintToken(address to, uint256 tokenId, uint256 quantity) internal virtual;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/utils/Strings.sol";
import "creator-token-contracts/contracts/erc1155c/ERC1155C.sol";
import "creator-token-contracts/contracts/access/OwnableBasic.sol";
import "creator-token-contracts/contracts/programmable-royalties/BasicRoyalties.sol";
import "./NiftyWhitelistMint.sol";


contract NiftyIslandDigiPacks is ERC1155C, OwnableBasic, BasicRoyalties, NiftyWhitelistMint {
    using Strings for uint256;

    string public name;
    string public symbol;

    constructor(
        address royaltyReceiver_,
        uint96 royaltyFeeNumerator_,
        string memory uri_,
        string memory name_,
        string memory symbol_
    ) 
        BasicRoyalties(royaltyReceiver_, royaltyFeeNumerator_)
        ERC1155OpenZeppelin(uri_)
    {
        name = name_;
        symbol = symbol_;
    }

    modifier onlyNiftyOwner() {
        _requireCallerIsContractOwner();
        _;
    }

    function supportsInterface(bytes4 interfaceId) public view virtual override (ERC1155C, ERC2981) returns (bool) {
        return super.supportsInterface(interfaceId);
    }

    function setDefaultRoyalty(address receiver, uint96 feeNumerator) onlyNiftyOwner external {
        _setDefaultRoyalty(receiver, feeNumerator);
    }

    function setTokenRoyalty(uint256 tokenId, address receiver, uint96 feeNumerator) onlyNiftyOwner external {
        _setTokenRoyalty(tokenId, receiver, feeNumerator);
    }

    function setURI(string memory uri_) onlyNiftyOwner external {
        _setURI(uri_);
    }

    function _mintToken(address to, uint256 tokenId, uint256 quantity) internal override {
        _mint(to, tokenId, quantity, "");
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

import "creator-token-contracts/contracts/minting/ClaimPeriodBase.sol";
import "./MintTokenBase1155.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";

/**
 * @title NiftyWhitelistMint
 * @author Limit Break, Inc.
 * @notice Base functionality of a contract mix-in that may optionally be used with extend ERC-721 tokens with merkle-proof based whitelist minting capabilities.
 * @dev Inheriting contracts must implement `_mintToken`.
 *
 * @dev The leaf nodes of the merkle tree contain the address, token ID and quantity of tokens that may be minted by that address.
 */
abstract contract NiftyWhitelistMint is ClaimPeriodBase, MintTokenBase {  
    error NiftyWhitelistMint__ArrayLengthMustBeGreaterThanZero();
    error NiftyWhitelistMint__ArrayLengthsMustMatch();
    error NiftyWhitelistMint__ClaimAmountTooLarge();
    error NiftyWhitelistMint__InsufficientRemainingAllowance();
    error NiftyWhitelistMint__InvalidProof();
    error NiftyWhitelistMint__MerkleRootCannotBeZero();
    error NiftyWhitelistMint__MerkleRootHasNotBeenInitialized();
    error NiftyWhitelistMint__MerkleRootImmutable();
    error NiftyWhitelistMint__PermittedNumberOfMerkleRootChangesMustBeGreaterThanZero();
    error NiftyWhitelistMint__TokenIDAlreadyRegistered();

    /// @dev The number of times the merkle root may be updated
    mapping(uint256 => uint256) private _remainingNumberOfMerkleRootChanges;

    /// @dev This is the root of the merkle tree containing the whitelist data
    mapping (uint256 => bytes32) private _merkleRoot;

    /// @dev Mapping that tracks the amount of tokens claimed by a given address for a given token ID
    mapping (address => mapping(uint256 => uint256)) private _whitelistClaimed;

    /// @notice Emitted when a merkle root is updated
    event MerkleRootUpdated(uint256 indexed tokenId, bytes32 merkleRoot_);

    constructor() {}

    /// @notice Mints the specified quantity to the calling address if the submitted merkle proof successfully verifies the reserved quantity for the caller in the whitelist.
    ///
    /// Throws when the claim period has not opened.
    /// Throws when the claim period has closed.
    /// Throws if a merkle root has not been set.
    /// Throws if the caller has already successfully claimed.
    /// Throws if the amountToClaim is greater than the allocated quantity.
    /// Throws if the submitted merkle proof does not successfully verify the reserved quantity for the caller.
    function whitelistMint(uint256 tokenId, uint256 allocation, uint256 amountToClaim, bytes32[] calldata merkleProof_) external {
        _requireClaimsOpen();

        bytes32 merkleRootCache = _merkleRoot[tokenId];

        if(merkleRootCache == bytes32(0)) {
            revert NiftyWhitelistMint__MerkleRootHasNotBeenInitialized();
        }

        if (amountToClaim > allocation) {
            revert NiftyWhitelistMint__ClaimAmountTooLarge();
        }

        mapping(uint256 => uint256) storage ptrClaimedAmount = _whitelistClaimed[_msgSender()];

        unchecked {
            if(ptrClaimedAmount[tokenId] > (allocation - amountToClaim)) {
                revert NiftyWhitelistMint__InsufficientRemainingAllowance();
            }
        }
        
        if(!MerkleProof.verify(merkleProof_, merkleRootCache, keccak256(abi.encodePacked(_msgSender(), tokenId, allocation)))) {
            revert NiftyWhitelistMint__InvalidProof();
        }
        unchecked {
            ptrClaimedAmount[tokenId] += amountToClaim;
        }

        _mintToken(_msgSender(), tokenId, amountToClaim);
    }

    /// @notice Sets max merkle root changes for a provided token ID, and optionally initializes the root
    ///
    /// Throws if the caller is not the contract owner
    /// Throws if the provided token ID has already been registered
    /// Throws if array lengths are not all the same
    /// Throws if the provided max merkle root changes is 0
    /// If a merkle root is not provided (bytes32(0) value) it is ignored and not set
    function registerTokenIds(uint256[] calldata tokenIds, uint256[] calldata maxMerkleRootChanges, bytes32[] calldata merkleRoots) external {
        _requireCallerIsContractOwner();

        if(tokenIds.length != maxMerkleRootChanges.length) {
            revert NiftyWhitelistMint__ArrayLengthsMustMatch();
        }
        if(tokenIds.length != merkleRoots.length) {
            revert NiftyWhitelistMint__ArrayLengthsMustMatch();
        }

        if(tokenIds.length == 0) {
            revert NiftyWhitelistMint__ArrayLengthMustBeGreaterThanZero();
        }

        uint256 tokenId;
        bytes32 merkleRoot;
        for (uint256 i = 0; i < tokenIds.length;) {
            tokenId = tokenIds[i];
            merkleRoot = merkleRoots[i];

            if (_merkleRoot[tokenId] != bytes32(0)) {
                revert NiftyWhitelistMint__TokenIDAlreadyRegistered();
            }

            if (maxMerkleRootChanges[i] == 0) {
                revert NiftyWhitelistMint__PermittedNumberOfMerkleRootChangesMustBeGreaterThanZero();
            }
            _remainingNumberOfMerkleRootChanges[tokenId] = maxMerkleRootChanges[i];

            if (merkleRoot != bytes32(0)) {
                _merkleRoot[tokenId] = merkleRoot;
            }
            unchecked {
                ++i;
            }
        }
    }

    /// @notice Update the merkle root if the merkle root was marked as changeable during initialization
    ///
    /// Throws if the `merkleRootChangable` boolean is false
    /// Throws if provided merkle root is 0
    function setMerkleRoot(uint256 tokenId, bytes32 merkleRoot_) external {
        _requireCallerIsContractOwner();

        if(_remainingNumberOfMerkleRootChanges[tokenId] == 0) {
            revert NiftyWhitelistMint__MerkleRootImmutable();
        }

        if(merkleRoot_ == bytes32(0)) {
            revert NiftyWhitelistMint__MerkleRootCannotBeZero();
        }

        _merkleRoot[tokenId] = merkleRoot_;

        unchecked {
            _remainingNumberOfMerkleRootChanges[tokenId]--;
        }

        emit MerkleRootUpdated(tokenId, merkleRoot_);
    }

    /// @notice Returns the merkle root and remaining number of merkle root changes for the specified token id
    function getMerkleInfo(uint256 tokenId) external view returns (bytes32, uint256) {
        return (_merkleRoot[tokenId], _remainingNumberOfMerkleRootChanges[tokenId]);
    }

    /// @notice Returns the amount of tokens claimed by the specified address for the specified token id
    function whitelistClaimed(address account, uint256 tokenId) external view returns (uint256) {
        return _whitelistClaimed[account][tokenId];
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.4;

import "./OwnablePermissions.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

abstract contract OwnableBasic is OwnablePermissions, Ownable {
    function _requireCallerIsContractOwner() internal view virtual override {
        _checkOwner();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/utils/Context.sol";

abstract contract OwnablePermissions is Context {
    function _requireCallerIsContractOwner() internal view virtual;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

enum AllowlistTypes {
    Operators,
    PermittedContractReceivers
}

enum ReceiverConstraints {
    None,
    NoCode,
    EOA
}

enum CallerConstraints {
    None,
    OperatorWhitelistEnableOTC,
    OperatorWhitelistDisableOTC
}

enum StakerConstraints {
    None,
    CallerIsTxOrigin,
    EOA
}

enum TransferSecurityLevels {
    Zero,
    One,
    Two,
    Three,
    Four,
    Five,
    Six
}

struct TransferSecurityPolicy {
    CallerConstraints callerConstraints;
    ReceiverConstraints receiverConstraints;
}

struct CollectionSecurityPolicy {
    TransferSecurityLevels transferSecurityLevel;
    uint120 operatorWhitelistId;
    uint120 permittedContractReceiversId;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;

import "@openzeppelin/contracts/utils/Context.sol";

/**
 * @title TransferValidation
 * @author Limit Break, Inc.
 * @notice A mix-in that can be combined with ERC-721 contracts to provide more granular hooks.
 * Openzeppelin's ERC721 contract only provides hooks for before and after transfer.  This allows
 * developers to validate or customize transfers within the context of a mint, a burn, or a transfer.
 */
abstract contract TransferValidation is Context {
    
    error ShouldNotMintToBurnAddress();

    /// @dev Inheriting contracts should call this function in the _beforeTokenTransfer function to get more granular hooks.
    function _validateBeforeTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _preValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _preValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _preValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Inheriting contracts should call this function in the _afterTokenTransfer function to get more granular hooks.
    function _validateAfterTransfer(address from, address to, uint256 tokenId) internal virtual {
        bool fromZeroAddress = from == address(0);
        bool toZeroAddress = to == address(0);

        if(fromZeroAddress && toZeroAddress) {
            revert ShouldNotMintToBurnAddress();
        } else if(fromZeroAddress) {
            _postValidateMint(_msgSender(), to, tokenId, msg.value);
        } else if(toZeroAddress) {
            _postValidateBurn(_msgSender(), from, tokenId, msg.value);
        } else {
            _postValidateTransfer(_msgSender(), from, to, tokenId, msg.value);
        }
    }

    /// @dev Optional validation hook that fires before a mint
    function _preValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a mint
    function _postValidateMint(address caller, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a burn
    function _preValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a burn
    function _postValidateBurn(address caller, address from, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires before a transfer
    function _preValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}

    /// @dev Optional validation hook that fires after a transfer
    function _postValidateTransfer(address caller, address from, address to, uint256 tokenId, uint256 value) internal virtual {}
}

{
  "compilationTarget": {
    "src/NiftyIslandDigiPacks.sol": "NiftyIslandDigiPacks"
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs"
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [
    ":@openzeppelin/=lib/openzeppelin-contracts/",
    ":creator-token-contracts/=lib/creator-token-contracts/",
    ":ds-test/=lib/forge-std/lib/ds-test/src/",
    ":forge-std/=lib/forge-std/src/",
    ":hardhat/=lib/creator-token-contracts/node_modules/hardhat/",
    ":murky/=lib/murky/src/",
    ":openzeppelin-contracts/=lib/openzeppelin-contracts/"
  ]
}